| /* |
| * linux/arch/arm/mach-pxa/income.c |
| * |
| * Support for Income s.r.o. SH-Dmaster PXA270 SBC |
| * |
| * Copyright (C) 2010 |
| * Marek Vasut <marek.vasut@gmail.com> |
| * Pavel Revak <palo@bielyvlk.sk> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm_backlight.h> |
| #include <linux/i2c/pxa-i2c.h> |
| #include <linux/sysdev.h> |
| |
| #include <asm/irq.h> |
| #include <asm/mach-types.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/mmc.h> |
| #include <mach/ohci.h> |
| #include <mach/pxa27x.h> |
| #include <mach/pxa27x-udc.h> |
| #include <mach/pxafb.h> |
| |
| #include "devices.h" |
| #include "generic.h" |
| |
| #define GPIO114_INCOME_ETH_IRQ (114) |
| #define GPIO0_INCOME_SD_DETECT (0) |
| #define GPIO0_INCOME_SD_RO (1) |
| #define GPIO54_INCOME_LED_A (54) |
| #define GPIO55_INCOME_LED_B (55) |
| #define GPIO113_INCOME_TS_IRQ (113) |
| |
| /****************************************************************************** |
| * SD/MMC card controller |
| ******************************************************************************/ |
| #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) |
| static struct pxamci_platform_data income_mci_platform_data = { |
| .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| .gpio_power = -1, |
| .gpio_card_detect = GPIO0_INCOME_SD_DETECT, |
| .gpio_card_ro = GPIO0_INCOME_SD_RO, |
| .detect_delay_ms = 200, |
| }; |
| |
| static void __init income_mmc_init(void) |
| { |
| pxa_set_mci_info(&income_mci_platform_data); |
| } |
| #else |
| static inline void income_mmc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * USB Host |
| ******************************************************************************/ |
| #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
| static struct pxaohci_platform_data income_ohci_info = { |
| .port_mode = PMM_PERPORT_MODE, |
| .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW, |
| }; |
| |
| static void __init income_uhc_init(void) |
| { |
| pxa_set_ohci_info(&income_ohci_info); |
| } |
| #else |
| static inline void income_uhc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * LED |
| ******************************************************************************/ |
| #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) |
| struct gpio_led income_gpio_leds[] = { |
| { |
| .name = "income:green:leda", |
| .default_trigger = "none", |
| .gpio = GPIO54_INCOME_LED_A, |
| .active_low = 1, |
| }, |
| { |
| .name = "income:green:ledb", |
| .default_trigger = "none", |
| .gpio = GPIO55_INCOME_LED_B, |
| .active_low = 1, |
| } |
| }; |
| |
| static struct gpio_led_platform_data income_gpio_led_info = { |
| .leds = income_gpio_leds, |
| .num_leds = ARRAY_SIZE(income_gpio_leds), |
| }; |
| |
| static struct platform_device income_leds = { |
| .name = "leds-gpio", |
| .id = -1, |
| .dev = { |
| .platform_data = &income_gpio_led_info, |
| } |
| }; |
| |
| static void __init income_led_init(void) |
| { |
| platform_device_register(&income_leds); |
| } |
| #else |
| static inline void income_led_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * I2C |
| ******************************************************************************/ |
| #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) |
| static struct i2c_board_info __initdata income_i2c_devs[] = { |
| { |
| I2C_BOARD_INFO("ds1340", 0x68), |
| }, { |
| I2C_BOARD_INFO("lm75", 0x4f), |
| }, |
| }; |
| |
| static void __init income_i2c_init(void) |
| { |
| pxa_set_i2c_info(NULL); |
| pxa27x_set_i2c_power_info(NULL); |
| i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs)); |
| } |
| #else |
| static inline void income_i2c_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Framebuffer |
| ******************************************************************************/ |
| #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) |
| static struct pxafb_mode_info income_lcd_modes[] = { |
| { |
| .pixclock = 144700, |
| .xres = 320, |
| .yres = 240, |
| .bpp = 32, |
| .depth = 18, |
| |
| .left_margin = 10, |
| .right_margin = 10, |
| .upper_margin = 7, |
| .lower_margin = 8, |
| |
| .hsync_len = 20, |
| .vsync_len = 2, |
| |
| .sync = FB_SYNC_VERT_HIGH_ACT, |
| }, |
| }; |
| |
| static struct pxafb_mach_info income_lcd_screen = { |
| .modes = income_lcd_modes, |
| .num_modes = ARRAY_SIZE(income_lcd_modes), |
| .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL, |
| }; |
| |
| static void __init income_lcd_init(void) |
| { |
| set_pxa_fb_info(&income_lcd_screen); |
| } |
| #else |
| static inline void income_lcd_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Backlight |
| ******************************************************************************/ |
| #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE) |
| static struct platform_pwm_backlight_data income_backlight_data = { |
| .pwm_id = 0, |
| .max_brightness = 0x3ff, |
| .dft_brightness = 0x1ff, |
| .pwm_period_ns = 1000000, |
| }; |
| |
| static struct platform_device income_backlight = { |
| .name = "pwm-backlight", |
| .dev = { |
| .parent = &pxa27x_device_pwm0.dev, |
| .platform_data = &income_backlight_data, |
| }, |
| }; |
| |
| static void __init income_pwm_init(void) |
| { |
| platform_device_register(&income_backlight); |
| } |
| #else |
| static inline void income_pwm_init(void) {} |
| #endif |
| |
| void __init colibri_pxa270_income_boardinit(void) |
| { |
| pxa_set_ffuart_info(NULL); |
| pxa_set_btuart_info(NULL); |
| pxa_set_stuart_info(NULL); |
| |
| income_mmc_init(); |
| income_uhc_init(); |
| income_led_init(); |
| income_i2c_init(); |
| income_lcd_init(); |
| income_pwm_init(); |
| } |
| |