rt2800: add rt2800lib (part two)
Code unification.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6bd646a..365f66f 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -45,832 +45,6 @@
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-static const struct rt2x00debug rt2800usb_rt2x00debug = {
- .owner = THIS_MODULE,
- .csr = {
- .read = rt2800_register_read,
- .write = rt2800_register_write,
- .flags = RT2X00DEBUGFS_OFFSET,
- .word_base = CSR_REG_BASE,
- .word_size = sizeof(u32),
- .word_count = CSR_REG_SIZE / sizeof(u32),
- },
- .eeprom = {
- .read = rt2x00_eeprom_read,
- .write = rt2x00_eeprom_write,
- .word_base = EEPROM_BASE,
- .word_size = sizeof(u16),
- .word_count = EEPROM_SIZE / sizeof(u16),
- },
- .bbp = {
- .read = rt2800_bbp_read,
- .write = rt2800_bbp_write,
- .word_base = BBP_BASE,
- .word_size = sizeof(u8),
- .word_count = BBP_SIZE / sizeof(u8),
- },
- .rf = {
- .read = rt2x00_rf_read,
- .write = rt2800_rf_write,
- .word_base = RF_BASE,
- .word_size = sizeof(u32),
- .word_count = RF_SIZE / sizeof(u32),
- },
-};
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-
-static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-{
- u32 reg;
-
- rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
- return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-}
-
-#ifdef CONFIG_RT2X00_LIB_LEDS
-static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
- enum led_brightness brightness)
-{
- struct rt2x00_led *led =
- container_of(led_cdev, struct rt2x00_led, led_dev);
- unsigned int enabled = brightness != LED_OFF;
- unsigned int bg_mode =
- (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
- unsigned int polarity =
- rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
- EEPROM_FREQ_LED_POLARITY);
- unsigned int ledmode =
- rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
- EEPROM_FREQ_LED_MODE);
-
- if (led->type == LED_TYPE_RADIO) {
- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
- enabled ? 0x20 : 0);
- } else if (led->type == LED_TYPE_ASSOC) {
- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
- enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
- } else if (led->type == LED_TYPE_QUALITY) {
- /*
- * The brightness is divided into 6 levels (0 - 5),
- * The specs tell us the following levels:
- * 0, 1 ,3, 7, 15, 31
- * to determine the level in a simple way we can simply
- * work with bitshifting:
- * (1 << level) - 1
- */
- rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
- (1 << brightness / (LED_FULL / 6)) - 1,
- polarity);
- }
-}
-
-static int rt2800usb_blink_set(struct led_classdev *led_cdev,
- unsigned long *delay_on,
- unsigned long *delay_off)
-{
- struct rt2x00_led *led =
- container_of(led_cdev, struct rt2x00_led, led_dev);
- u32 reg;
-
- rt2800_register_read(led->rt2x00dev, LED_CFG, ®);
- rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on);
- rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
- rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
- rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
- rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12);
- rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
- rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
- rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
-
- return 0;
-}
-
-static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev,
- struct rt2x00_led *led,
- enum led_type type)
-{
- led->rt2x00dev = rt2x00dev;
- led->type = type;
- led->led_dev.brightness_set = rt2800usb_brightness_set;
- led->led_dev.blink_set = rt2800usb_blink_set;
- led->flags = LED_INITIALIZED;
-}
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
-/*
- * Configuration handlers.
- */
-static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
- struct rt2x00lib_crypto *crypto,
- struct ieee80211_key_conf *key)
-{
- struct mac_wcid_entry wcid_entry;
- struct mac_iveiv_entry iveiv_entry;
- u32 offset;
- u32 reg;
-
- offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-
- rt2800_register_read(rt2x00dev, offset, ®);
- rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB,
- !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
- rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER,
- (crypto->cmd == SET_KEY) * crypto->cipher);
- rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX,
- (crypto->cmd == SET_KEY) * crypto->bssidx);
- rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
- rt2800_register_write(rt2x00dev, offset, reg);
-
- offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-
- memset(&iveiv_entry, 0, sizeof(iveiv_entry));
- if ((crypto->cipher == CIPHER_TKIP) ||
- (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
- (crypto->cipher == CIPHER_AES))
- iveiv_entry.iv[3] |= 0x20;
- iveiv_entry.iv[3] |= key->keyidx << 6;
- rt2800_register_multiwrite(rt2x00dev, offset,
- &iveiv_entry, sizeof(iveiv_entry));
-
- offset = MAC_WCID_ENTRY(key->hw_key_idx);
-
- memset(&wcid_entry, 0, sizeof(wcid_entry));
- if (crypto->cmd == SET_KEY)
- memcpy(&wcid_entry, crypto->address, ETH_ALEN);
- rt2800_register_multiwrite(rt2x00dev, offset,
- &wcid_entry, sizeof(wcid_entry));
-}
-
-static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
- struct rt2x00lib_crypto *crypto,
- struct ieee80211_key_conf *key)
-{
- struct hw_key_entry key_entry;
- struct rt2x00_field32 field;
- u32 offset;
- u32 reg;
-
- if (crypto->cmd == SET_KEY) {
- key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-
- memcpy(key_entry.key, crypto->key,
- sizeof(key_entry.key));
- memcpy(key_entry.tx_mic, crypto->tx_mic,
- sizeof(key_entry.tx_mic));
- memcpy(key_entry.rx_mic, crypto->rx_mic,
- sizeof(key_entry.rx_mic));
-
- offset = SHARED_KEY_ENTRY(key->hw_key_idx);
- rt2800_register_multiwrite(rt2x00dev, offset,
- &key_entry, sizeof(key_entry));
- }
-
- /*
- * The cipher types are stored over multiple registers
- * starting with SHARED_KEY_MODE_BASE each word will have
- * 32 bits and contains the cipher types for 2 bssidx each.
- * Using the correct defines correctly will cause overhead,
- * so just calculate the correct offset.
- */
- field.bit_offset = 4 * (key->hw_key_idx % 8);
- field.bit_mask = 0x7 << field.bit_offset;
-
- offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-
- rt2800_register_read(rt2x00dev, offset, ®);
- rt2x00_set_field32(®, field,
- (crypto->cmd == SET_KEY) * crypto->cipher);
- rt2800_register_write(rt2x00dev, offset, reg);
-
- /*
- * Update WCID information
- */
- rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-
- return 0;
-}
-
-static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
- struct rt2x00lib_crypto *crypto,
- struct ieee80211_key_conf *key)
-{
- struct hw_key_entry key_entry;
- u32 offset;
-
- if (crypto->cmd == SET_KEY) {
- /*
- * 1 pairwise key is possible per AID, this means that the AID
- * equals our hw_key_idx. Make sure the WCID starts _after_ the
- * last possible shared key entry.
- */
- if (crypto->aid > (256 - 32))
- return -ENOSPC;
-
- key->hw_key_idx = 32 + crypto->aid;
-
- memcpy(key_entry.key, crypto->key,
- sizeof(key_entry.key));
- memcpy(key_entry.tx_mic, crypto->tx_mic,
- sizeof(key_entry.tx_mic));
- memcpy(key_entry.rx_mic, crypto->rx_mic,
- sizeof(key_entry.rx_mic));
-
- offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
- rt2800_register_multiwrite(rt2x00dev, offset,
- &key_entry, sizeof(key_entry));
- }
-
- /*
- * Update WCID information
- */
- rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-
- return 0;
-}
-
-static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev,
- const unsigned int filter_flags)
-{
- u32 reg;
-
- /*
- * Start configuration steps.
- * Note that the version error will always be dropped
- * and broadcast frames will always be accepted since
- * there is no filter for it at this time.
- */
- rt2800_register_read(rt2x00dev, RX_FILTER_CFG, ®);
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR,
- !(filter_flags & FIF_FCSFAIL));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR,
- !(filter_flags & FIF_PLCPFAIL));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME,
- !(filter_flags & FIF_PROMISC_IN_BSS));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1);
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST,
- !(filter_flags & FIF_ALLMULTI));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0);
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1);
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK,
- !(filter_flags & FIF_CONTROL));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END,
- !(filter_flags & FIF_CONTROL));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK,
- !(filter_flags & FIF_CONTROL));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS,
- !(filter_flags & FIF_CONTROL));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS,
- !(filter_flags & FIF_CONTROL));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL,
- !(filter_flags & FIF_PSPOLL));
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1);
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0);
- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL,
- !(filter_flags & FIF_CONTROL));
- rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-}
-
-static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
- struct rt2x00_intf *intf,
- struct rt2x00intf_conf *conf,
- const unsigned int flags)
-{
- unsigned int beacon_base;
- u32 reg;
-
- if (flags & CONFIG_UPDATE_TYPE) {
- /*
- * Clear current synchronisation setup.
- * For the Beacon base registers we only need to clear
- * the first byte since that byte contains the VALID and OWNER
- * bits which (when set to 0) will invalidate the entire beacon.
- */
- beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
- rt2800_register_write(rt2x00dev, beacon_base, 0);
-
- /*
- * Enable synchronisation.
- */
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
- rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync);
- rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
- }
-
- if (flags & CONFIG_UPDATE_MAC) {
- reg = le32_to_cpu(conf->mac[1]);
- rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
- conf->mac[1] = cpu_to_le32(reg);
-
- rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
- conf->mac, sizeof(conf->mac));
- }
-
- if (flags & CONFIG_UPDATE_BSSID) {
- reg = le32_to_cpu(conf->bssid[1]);
- rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0);
- rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
- conf->bssid[1] = cpu_to_le32(reg);
-
- rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
- conf->bssid, sizeof(conf->bssid));
- }
-}
-
-static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
- struct rt2x00lib_erp *erp)
-{
- u32 reg;
-
- rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
- rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
- rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
- rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY,
- !!erp->short_preamble);
- rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE,
- !!erp->short_preamble);
- rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
- rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
- rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL,
- erp->cts_protection ? 2 : 0);
- rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
- rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
- erp->basic_rates);
- rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
- rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®);
- rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
- rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
- rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-
- rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®);
- rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
- rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
- rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
- rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs);
- rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
- rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-
- rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
- erp->beacon_int * 16);
- rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-}
-
-static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
- struct antenna_setup *ant)
-{
- u8 r1;
- u8 r3;
-
- rt2800_bbp_read(rt2x00dev, 1, &r1);
- rt2800_bbp_read(rt2x00dev, 3, &r3);
-
- /*
- * Configure the TX antenna.
- */
- switch ((int)ant->tx) {
- case 1:
- rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
- break;
- case 2:
- rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
- break;
- case 3:
- /* Do nothing */
- break;
- }
-
- /*
- * Configure the RX antenna.
- */
- switch ((int)ant->rx) {
- case 1:
- rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
- break;
- case 2:
- rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
- break;
- case 3:
- rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
- break;
- }
-
- rt2800_bbp_write(rt2x00dev, 3, r3);
- rt2800_bbp_write(rt2x00dev, 1, r1);
-}
-
-static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
- struct rt2x00lib_conf *libconf)
-{
- u16 eeprom;
- short lna_gain;
-
- if (libconf->rf.channel <= 14) {
- rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
- lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
- } else if (libconf->rf.channel <= 64) {
- rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
- lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
- } else if (libconf->rf.channel <= 128) {
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
- lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
- } else {
- rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
- lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
- }
-
- rt2x00dev->lna_gain = lna_gain;
-}
-
-static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf,
- struct rf_channel *rf,
- struct channel_info *info)
-{
- rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-
- if (rt2x00dev->default_ant.tx == 1)
- rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-
- if (rt2x00dev->default_ant.rx == 1) {
- rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
- rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
- } else if (rt2x00dev->default_ant.rx == 2)
- rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-
- if (rf->channel > 14) {
- /*
- * When TX power is below 0, we should increase it by 7 to
- * make it a positive value (Minumum value is -7).
- * However this means that values between 0 and 7 have
- * double meaning, and we should set a 7DBm boost flag.
- */
- rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
- (info->tx_power1 >= 0));
-
- if (info->tx_power1 < 0)
- info->tx_power1 += 7;
-
- rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
- TXPOWER_A_TO_DEV(info->tx_power1));
-
- rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
- (info->tx_power2 >= 0));
-
- if (info->tx_power2 < 0)
- info->tx_power2 += 7;
-
- rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
- TXPOWER_A_TO_DEV(info->tx_power2));
- } else {
- rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
- TXPOWER_G_TO_DEV(info->tx_power1));
- rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
- TXPOWER_G_TO_DEV(info->tx_power2));
- }
-
- rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-
- rt2800_rf_write(rt2x00dev, 1, rf->rf1);
- rt2800_rf_write(rt2x00dev, 2, rf->rf2);
- rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
- rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-
- udelay(200);
-
- rt2800_rf_write(rt2x00dev, 1, rf->rf1);
- rt2800_rf_write(rt2x00dev, 2, rf->rf2);
- rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
- rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-
- udelay(200);
-
- rt2800_rf_write(rt2x00dev, 1, rf->rf1);
- rt2800_rf_write(rt2x00dev, 2, rf->rf2);
- rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
- rt2800_rf_write(rt2x00dev, 4, rf->rf4);
-}
-
-static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf,
- struct rf_channel *rf,
- struct channel_info *info)
-{
- u8 rfcsr;
-
- rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
- rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3);
-
- rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
- rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
-
- rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
- TXPOWER_G_TO_DEV(info->tx_power1));
- rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
-
- rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
- rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
-
- rt2800_rfcsr_write(rt2x00dev, 24,
- rt2x00dev->calibration[conf_is_ht40(conf)]);
-
- rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
- rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
-}
-
-static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf,
- struct rf_channel *rf,
- struct channel_info *info)
-{
- u32 reg;
- unsigned int tx_pin;
- u8 bbp;
-
- if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
- rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info);
- else
- rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info);
-
- /*
- * Change BBP settings
- */
- rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 86, 0);
-
- if (rf->channel <= 14) {
- if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
- rt2800_bbp_write(rt2x00dev, 82, 0x62);
- rt2800_bbp_write(rt2x00dev, 75, 0x46);
- } else {
- rt2800_bbp_write(rt2x00dev, 82, 0x84);
- rt2800_bbp_write(rt2x00dev, 75, 0x50);
- }
- } else {
- rt2800_bbp_write(rt2x00dev, 82, 0xf2);
-
- if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
- rt2800_bbp_write(rt2x00dev, 75, 0x46);
- else
- rt2800_bbp_write(rt2x00dev, 75, 0x50);
- }
-
- rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®);
- rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
- rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14);
- rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14);
- rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
-
- tx_pin = 0;
-
- /* Turn on unused PA or LNA when not using 1T or 1R */
- if (rt2x00dev->default_ant.tx != 1) {
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
- }
-
- /* Turn on unused PA or LNA when not using 1T or 1R */
- if (rt2x00dev->default_ant.rx != 1) {
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
- }
-
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-
- rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
- rt2800_bbp_read(rt2x00dev, 4, &bbp);
- rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
- rt2800_bbp_write(rt2x00dev, 4, bbp);
-
- rt2800_bbp_read(rt2x00dev, 3, &bbp);
- rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
- rt2800_bbp_write(rt2x00dev, 3, bbp);
-
- if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
- if (conf_is_ht40(conf)) {
- rt2800_bbp_write(rt2x00dev, 69, 0x1a);
- rt2800_bbp_write(rt2x00dev, 70, 0x0a);
- rt2800_bbp_write(rt2x00dev, 73, 0x16);
- } else {
- rt2800_bbp_write(rt2x00dev, 69, 0x16);
- rt2800_bbp_write(rt2x00dev, 70, 0x08);
- rt2800_bbp_write(rt2x00dev, 73, 0x11);
- }
- }
-
- msleep(1);
-}
-
-static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev,
- const int txpower)
-{
- u32 reg;
- u32 value = TXPOWER_G_TO_DEV(txpower);
- u8 r1;
-
- rt2800_bbp_read(rt2x00dev, 1, &r1);
- rt2x00_set_field8(®, BBP1_TX_POWER, 0);
- rt2800_bbp_write(rt2x00dev, 1, r1);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value);
- rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value);
- rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value);
- rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-
- rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®);
- rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value);
- rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value);
- rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value);
- rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value);
- rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-}
-
-static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
- struct rt2x00lib_conf *libconf)
-{
- u32 reg;
-
- rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®);
- rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT,
- libconf->conf->short_frame_max_tx_count);
- rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT,
- libconf->conf->long_frame_max_tx_count);
- rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000);
- rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
- rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0);
- rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
- rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
-}
-
-static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
- struct rt2x00lib_conf *libconf)
-{
- enum dev_state state =
- (libconf->conf->flags & IEEE80211_CONF_PS) ?
- STATE_SLEEP : STATE_AWAKE;
- u32 reg;
-
- if (state == STATE_SLEEP) {
- rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-
- rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
- rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
- rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
- libconf->conf->listen_interval - 1);
- rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1);
- rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-
- rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
- } else {
- rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-
- rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
- rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
- rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
- rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0);
- rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
- }
-}
-
-static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
- struct rt2x00lib_conf *libconf,
- const unsigned int flags)
-{
- /* Always recalculate LNA gain before changing configuration */
- rt2800usb_config_lna_gain(rt2x00dev, libconf);
-
- if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
- rt2800usb_config_channel(rt2x00dev, libconf->conf,
- &libconf->rf, &libconf->channel);
- if (flags & IEEE80211_CONF_CHANGE_POWER)
- rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level);
- if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
- rt2800usb_config_retry_limit(rt2x00dev, libconf);
- if (flags & IEEE80211_CONF_CHANGE_PS)
- rt2800usb_config_ps(rt2x00dev, libconf);
-}
-
-/*
- * Link tuning
- */
-static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev,
- struct link_qual *qual)
-{
- u32 reg;
-
- /*
- * Update FCS error count from register.
- */
- rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®);
- qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-}
-
-static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-{
- if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
- if (rt2x00_intf_is_usb(rt2x00dev) &&
- rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
- return 0x1c + (2 * rt2x00dev->lna_gain);
- else
- return 0x2e + rt2x00dev->lna_gain;
- }
-
- if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
- return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
- else
- return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-}
-
-static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev,
- struct link_qual *qual, u8 vgc_level)
-{
- if (qual->vgc_level != vgc_level) {
- rt2800_bbp_write(rt2x00dev, 66, vgc_level);
- qual->vgc_level = vgc_level;
- qual->vgc_level_reg = vgc_level;
- }
-}
-
-static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
- struct link_qual *qual)
-{
- rt2800usb_set_vgc(rt2x00dev, qual,
- rt2800usb_get_default_vgc(rt2x00dev));
-}
-
-static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
- struct link_qual *qual, const u32 count)
-{
- if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
- return;
-
- /*
- * When RSSI is better then -80 increase VGC level with 0x10
- */
- rt2800usb_set_vgc(rt2x00dev, qual,
- rt2800usb_get_default_vgc(rt2x00dev) +
- ((qual->rssi > -80) * 0x10));
-}
-
/*
* Firmware functions
*/
@@ -2205,9 +1379,9 @@
* Store led settings, for correct led behaviour.
*/
#ifdef CONFIG_RT2X00_LIB_LEDS
- rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
- rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
- rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+ rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+ rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+ rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
&rt2x00dev->led_mcu_reg);
@@ -2645,10 +1819,10 @@
.uninitialize = rt2x00usb_uninitialize,
.clear_entry = rt2x00usb_clear_entry,
.set_device_state = rt2800usb_set_device_state,
- .rfkill_poll = rt2800usb_rfkill_poll,
- .link_stats = rt2800usb_link_stats,
- .reset_tuner = rt2800usb_reset_tuner,
- .link_tuner = rt2800usb_link_tuner,
+ .rfkill_poll = rt2800_rfkill_poll,
+ .link_stats = rt2800_link_stats,
+ .reset_tuner = rt2800_reset_tuner,
+ .link_tuner = rt2800_link_tuner,
.write_tx_desc = rt2800usb_write_tx_desc,
.write_tx_data = rt2x00usb_write_tx_data,
.write_beacon = rt2800usb_write_beacon,
@@ -2656,13 +1830,13 @@
.kick_tx_queue = rt2800usb_kick_tx_queue,
.kill_tx_queue = rt2x00usb_kill_tx_queue,
.fill_rxdone = rt2800usb_fill_rxdone,
- .config_shared_key = rt2800usb_config_shared_key,
- .config_pairwise_key = rt2800usb_config_pairwise_key,
- .config_filter = rt2800usb_config_filter,
- .config_intf = rt2800usb_config_intf,
- .config_erp = rt2800usb_config_erp,
- .config_ant = rt2800usb_config_ant,
- .config = rt2800usb_config,
+ .config_shared_key = rt2800_config_shared_key,
+ .config_pairwise_key = rt2800_config_pairwise_key,
+ .config_filter = rt2800_config_filter,
+ .config_intf = rt2800_config_intf,
+ .config_erp = rt2800_config_erp,
+ .config_ant = rt2800_config_ant,
+ .config = rt2800_config,
};
static const struct data_queue_desc rt2800usb_queue_rx = {
@@ -2699,7 +1873,7 @@
.lib = &rt2800usb_rt2x00_ops,
.hw = &rt2800usb_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt2800usb_rt2x00debug,
+ .debugfs = &rt2800_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};