| /* |
| * Probe module for 8250/16550-type PCI serial ports. |
| * |
| * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. |
| * |
| * Copyright (C) 2001 Russell King, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| */ |
| #undef DEBUG |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/tty.h> |
| #include <linux/serial_reg.h> |
| #include <linux/serial_core.h> |
| #include <linux/8250_pci.h> |
| #include <linux/bitops.h> |
| #include <linux/rational.h> |
| |
| #include <asm/byteorder.h> |
| #include <asm/io.h> |
| |
| #include <linux/dmaengine.h> |
| #include <linux/platform_data/dma-dw.h> |
| #include <linux/platform_data/dma-hsu.h> |
| |
| #include "8250.h" |
| |
| /* |
| * init function returns: |
| * > 0 - number of ports |
| * = 0 - use board->num_ports |
| * < 0 - error |
| */ |
| struct pci_serial_quirk { |
| u32 vendor; |
| u32 device; |
| u32 subvendor; |
| u32 subdevice; |
| int (*probe)(struct pci_dev *dev); |
| int (*init)(struct pci_dev *dev); |
| int (*setup)(struct serial_private *, |
| const struct pciserial_board *, |
| struct uart_8250_port *, int); |
| void (*exit)(struct pci_dev *dev); |
| }; |
| |
| #define PCI_NUM_BAR_RESOURCES 6 |
| |
| struct serial_private { |
| struct pci_dev *dev; |
| unsigned int nr; |
| void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; |
| struct pci_serial_quirk *quirk; |
| int line[0]; |
| }; |
| |
| static int pci_default_setup(struct serial_private*, |
| const struct pciserial_board*, struct uart_8250_port *, int); |
| |
| static void moan_device(const char *str, struct pci_dev *dev) |
| { |
| dev_err(&dev->dev, |
| "%s: %s\n" |
| "Please send the output of lspci -vv, this\n" |
| "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" |
| "manufacturer and name of serial board or\n" |
| "modem board to <linux-serial@vger.kernel.org>.\n", |
| pci_name(dev), str, dev->vendor, dev->device, |
| dev->subsystem_vendor, dev->subsystem_device); |
| } |
| |
| static int |
| setup_port(struct serial_private *priv, struct uart_8250_port *port, |
| int bar, int offset, int regshift) |
| { |
| struct pci_dev *dev = priv->dev; |
| |
| if (bar >= PCI_NUM_BAR_RESOURCES) |
| return -EINVAL; |
| |
| if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { |
| if (!priv->remapped_bar[bar]) |
| priv->remapped_bar[bar] = pci_ioremap_bar(dev, bar); |
| if (!priv->remapped_bar[bar]) |
| return -ENOMEM; |
| |
| port->port.iotype = UPIO_MEM; |
| port->port.iobase = 0; |
| port->port.mapbase = pci_resource_start(dev, bar) + offset; |
| port->port.membase = priv->remapped_bar[bar] + offset; |
| port->port.regshift = regshift; |
| } else { |
| port->port.iotype = UPIO_PORT; |
| port->port.iobase = pci_resource_start(dev, bar) + offset; |
| port->port.mapbase = 0; |
| port->port.membase = NULL; |
| port->port.regshift = 0; |
| } |
| return 0; |
| } |
| |
| /* |
| * ADDI-DATA GmbH communication cards <info@addi-data.com> |
| */ |
| static int addidata_apci7800_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar = 0, offset = board->first_offset; |
| bar = FL_GET_BASE(board->flags); |
| |
| if (idx < 2) { |
| offset += idx * board->uart_offset; |
| } else if ((idx >= 2) && (idx < 4)) { |
| bar += 1; |
| offset += ((idx - 2) * board->uart_offset); |
| } else if ((idx >= 4) && (idx < 6)) { |
| bar += 2; |
| offset += ((idx - 4) * board->uart_offset); |
| } else if (idx >= 6) { |
| bar += 3; |
| offset += ((idx - 6) * board->uart_offset); |
| } |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| /* |
| * AFAVLAB uses a different mixture of BARs and offsets |
| * Not that ugly ;) -- HW |
| */ |
| static int |
| afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar, offset = board->first_offset; |
| |
| bar = FL_GET_BASE(board->flags); |
| if (idx < 4) |
| bar += idx; |
| else { |
| bar = 4; |
| offset += (idx - 4) * board->uart_offset; |
| } |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| /* |
| * HP's Remote Management Console. The Diva chip came in several |
| * different versions. N-class, L2000 and A500 have two Diva chips, each |
| * with 3 UARTs (the third UART on the second chip is unused). Superdome |
| * and Keystone have one Diva chip with 3 UARTs. Some later machines have |
| * one Diva chip, but it has been expanded to 5 UARTs. |
| */ |
| static int pci_hp_diva_init(struct pci_dev *dev) |
| { |
| int rc = 0; |
| |
| switch (dev->subsystem_device) { |
| case PCI_DEVICE_ID_HP_DIVA_TOSCA1: |
| case PCI_DEVICE_ID_HP_DIVA_HALFDOME: |
| case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: |
| case PCI_DEVICE_ID_HP_DIVA_EVEREST: |
| rc = 3; |
| break; |
| case PCI_DEVICE_ID_HP_DIVA_TOSCA2: |
| rc = 2; |
| break; |
| case PCI_DEVICE_ID_HP_DIVA_MAESTRO: |
| rc = 4; |
| break; |
| case PCI_DEVICE_ID_HP_DIVA_POWERBAR: |
| case PCI_DEVICE_ID_HP_DIVA_HURRICANE: |
| rc = 1; |
| break; |
| } |
| |
| return rc; |
| } |
| |
| /* |
| * HP's Diva chip puts the 4th/5th serial port further out, and |
| * some serial ports are supposed to be hidden on certain models. |
| */ |
| static int |
| pci_hp_diva_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int offset = board->first_offset; |
| unsigned int bar = FL_GET_BASE(board->flags); |
| |
| switch (priv->dev->subsystem_device) { |
| case PCI_DEVICE_ID_HP_DIVA_MAESTRO: |
| if (idx == 3) |
| idx++; |
| break; |
| case PCI_DEVICE_ID_HP_DIVA_EVEREST: |
| if (idx > 0) |
| idx++; |
| if (idx > 2) |
| idx++; |
| break; |
| } |
| if (idx > 2) |
| offset = 0x18; |
| |
| offset += idx * board->uart_offset; |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| /* |
| * Added for EKF Intel i960 serial boards |
| */ |
| static int pci_inteli960ni_init(struct pci_dev *dev) |
| { |
| u32 oldval; |
| |
| if (!(dev->subsystem_device & 0x1000)) |
| return -ENODEV; |
| |
| /* is firmware started? */ |
| pci_read_config_dword(dev, 0x44, &oldval); |
| if (oldval == 0x00001000L) { /* RESET value */ |
| dev_dbg(&dev->dev, "Local i960 firmware missing\n"); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| /* |
| * Some PCI serial cards using the PLX 9050 PCI interface chip require |
| * that the card interrupt be explicitly enabled or disabled. This |
| * seems to be mainly needed on card using the PLX which also use I/O |
| * mapped memory. |
| */ |
| static int pci_plx9050_init(struct pci_dev *dev) |
| { |
| u8 irq_config; |
| void __iomem *p; |
| |
| if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { |
| moan_device("no memory in bar 0", dev); |
| return 0; |
| } |
| |
| irq_config = 0x41; |
| if (dev->vendor == PCI_VENDOR_ID_PANACOM || |
| dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) |
| irq_config = 0x43; |
| |
| if ((dev->vendor == PCI_VENDOR_ID_PLX) && |
| (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) |
| /* |
| * As the megawolf cards have the int pins active |
| * high, and have 2 UART chips, both ints must be |
| * enabled on the 9050. Also, the UARTS are set in |
| * 16450 mode by default, so we have to enable the |
| * 16C950 'enhanced' mode so that we can use the |
| * deep FIFOs |
| */ |
| irq_config = 0x5b; |
| /* |
| * enable/disable interrupts |
| */ |
| p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); |
| if (p == NULL) |
| return -ENOMEM; |
| writel(irq_config, p + 0x4c); |
| |
| /* |
| * Read the register back to ensure that it took effect. |
| */ |
| readl(p + 0x4c); |
| iounmap(p); |
| |
| return 0; |
| } |
| |
| static void pci_plx9050_exit(struct pci_dev *dev) |
| { |
| u8 __iomem *p; |
| |
| if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) |
| return; |
| |
| /* |
| * disable interrupts |
| */ |
| p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); |
| if (p != NULL) { |
| writel(0, p + 0x4c); |
| |
| /* |
| * Read the register back to ensure that it took effect. |
| */ |
| readl(p + 0x4c); |
| iounmap(p); |
| } |
| } |
| |
| #define NI8420_INT_ENABLE_REG 0x38 |
| #define NI8420_INT_ENABLE_BIT 0x2000 |
| |
| static void pci_ni8420_exit(struct pci_dev *dev) |
| { |
| void __iomem *p; |
| unsigned int bar = 0; |
| |
| if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { |
| moan_device("no memory in bar", dev); |
| return; |
| } |
| |
| p = pci_ioremap_bar(dev, bar); |
| if (p == NULL) |
| return; |
| |
| /* Disable the CPU Interrupt */ |
| writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), |
| p + NI8420_INT_ENABLE_REG); |
| iounmap(p); |
| } |
| |
| |
| /* MITE registers */ |
| #define MITE_IOWBSR1 0xc4 |
| #define MITE_IOWCR1 0xf4 |
| #define MITE_LCIMR1 0x08 |
| #define MITE_LCIMR2 0x10 |
| |
| #define MITE_LCIMR2_CLR_CPU_IE (1 << 30) |
| |
| static void pci_ni8430_exit(struct pci_dev *dev) |
| { |
| void __iomem *p; |
| unsigned int bar = 0; |
| |
| if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { |
| moan_device("no memory in bar", dev); |
| return; |
| } |
| |
| p = pci_ioremap_bar(dev, bar); |
| if (p == NULL) |
| return; |
| |
| /* Disable the CPU Interrupt */ |
| writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); |
| iounmap(p); |
| } |
| |
| /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ |
| static int |
| sbs_setup(struct serial_private *priv, const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar, offset = board->first_offset; |
| |
| bar = 0; |
| |
| if (idx < 4) { |
| /* first four channels map to 0, 0x100, 0x200, 0x300 */ |
| offset += idx * board->uart_offset; |
| } else if (idx < 8) { |
| /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ |
| offset += idx * board->uart_offset + 0xC00; |
| } else /* we have only 8 ports on PMC-OCTALPRO */ |
| return 1; |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| /* |
| * This does initialization for PMC OCTALPRO cards: |
| * maps the device memory, resets the UARTs (needed, bc |
| * if the module is removed and inserted again, the card |
| * is in the sleep mode) and enables global interrupt. |
| */ |
| |
| /* global control register offset for SBS PMC-OctalPro */ |
| #define OCT_REG_CR_OFF 0x500 |
| |
| static int sbs_init(struct pci_dev *dev) |
| { |
| u8 __iomem *p; |
| |
| p = pci_ioremap_bar(dev, 0); |
| |
| if (p == NULL) |
| return -ENOMEM; |
| /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ |
| writeb(0x10, p + OCT_REG_CR_OFF); |
| udelay(50); |
| writeb(0x0, p + OCT_REG_CR_OFF); |
| |
| /* Set bit-2 (INTENABLE) of Control Register */ |
| writeb(0x4, p + OCT_REG_CR_OFF); |
| iounmap(p); |
| |
| return 0; |
| } |
| |
| /* |
| * Disables the global interrupt of PMC-OctalPro |
| */ |
| |
| static void sbs_exit(struct pci_dev *dev) |
| { |
| u8 __iomem *p; |
| |
| p = pci_ioremap_bar(dev, 0); |
| /* FIXME: What if resource_len < OCT_REG_CR_OFF */ |
| if (p != NULL) |
| writeb(0, p + OCT_REG_CR_OFF); |
| iounmap(p); |
| } |
| |
| /* |
| * SIIG serial cards have an PCI interface chip which also controls |
| * the UART clocking frequency. Each UART can be clocked independently |
| * (except cards equipped with 4 UARTs) and initial clocking settings |
| * are stored in the EEPROM chip. It can cause problems because this |
| * version of serial driver doesn't support differently clocked UART's |
| * on single PCI card. To prevent this, initialization functions set |
| * high frequency clocking for all UART's on given card. It is safe (I |
| * hope) because it doesn't touch EEPROM settings to prevent conflicts |
| * with other OSes (like M$ DOS). |
| * |
| * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 |
| * |
| * There is two family of SIIG serial cards with different PCI |
| * interface chip and different configuration methods: |
| * - 10x cards have control registers in IO and/or memory space; |
| * - 20x cards have control registers in standard PCI configuration space. |
| * |
| * Note: all 10x cards have PCI device ids 0x10.. |
| * all 20x cards have PCI device ids 0x20.. |
| * |
| * There are also Quartet Serial cards which use Oxford Semiconductor |
| * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. |
| * |
| * Note: some SIIG cards are probed by the parport_serial object. |
| */ |
| |
| #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) |
| #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) |
| |
| static int pci_siig10x_init(struct pci_dev *dev) |
| { |
| u16 data; |
| void __iomem *p; |
| |
| switch (dev->device & 0xfff8) { |
| case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ |
| data = 0xffdf; |
| break; |
| case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ |
| data = 0xf7ff; |
| break; |
| default: /* 1S1P, 4S */ |
| data = 0xfffb; |
| break; |
| } |
| |
| p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); |
| if (p == NULL) |
| return -ENOMEM; |
| |
| writew(readw(p + 0x28) & data, p + 0x28); |
| readw(p + 0x28); |
| iounmap(p); |
| return 0; |
| } |
| |
| #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) |
| #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) |
| |
| static int pci_siig20x_init(struct pci_dev *dev) |
| { |
| u8 data; |
| |
| /* Change clock frequency for the first UART. */ |
| pci_read_config_byte(dev, 0x6f, &data); |
| pci_write_config_byte(dev, 0x6f, data & 0xef); |
| |
| /* If this card has 2 UART, we have to do the same with second UART. */ |
| if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || |
| ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { |
| pci_read_config_byte(dev, 0x73, &data); |
| pci_write_config_byte(dev, 0x73, data & 0xef); |
| } |
| return 0; |
| } |
| |
| static int pci_siig_init(struct pci_dev *dev) |
| { |
| unsigned int type = dev->device & 0xff00; |
| |
| if (type == 0x1000) |
| return pci_siig10x_init(dev); |
| else if (type == 0x2000) |
| return pci_siig20x_init(dev); |
| |
| moan_device("Unknown SIIG card", dev); |
| return -ENODEV; |
| } |
| |
| static int pci_siig_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; |
| |
| if (idx > 3) { |
| bar = 4; |
| offset = (idx - 4) * 8; |
| } |
| |
| return setup_port(priv, port, bar, offset, 0); |
| } |
| |
| /* |
| * Timedia has an explosion of boards, and to avoid the PCI table from |
| * growing *huge*, we use this function to collapse some 70 entries |
| * in the PCI table into one, for sanity's and compactness's sake. |
| */ |
| static const unsigned short timedia_single_port[] = { |
| 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 |
| }; |
| |
| static const unsigned short timedia_dual_port[] = { |
| 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, |
| 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, |
| 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, |
| 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, |
| 0xD079, 0 |
| }; |
| |
| static const unsigned short timedia_quad_port[] = { |
| 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, |
| 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, |
| 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, |
| 0xB157, 0 |
| }; |
| |
| static const unsigned short timedia_eight_port[] = { |
| 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, |
| 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 |
| }; |
| |
| static const struct timedia_struct { |
| int num; |
| const unsigned short *ids; |
| } timedia_data[] = { |
| { 1, timedia_single_port }, |
| { 2, timedia_dual_port }, |
| { 4, timedia_quad_port }, |
| { 8, timedia_eight_port } |
| }; |
| |
| /* |
| * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of |
| * listing them individually, this driver merely grabs them all with |
| * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, |
| * and should be left free to be claimed by parport_serial instead. |
| */ |
| static int pci_timedia_probe(struct pci_dev *dev) |
| { |
| /* |
| * Check the third digit of the subdevice ID |
| * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) |
| */ |
| if ((dev->subsystem_device & 0x00f0) >= 0x70) { |
| dev_info(&dev->dev, |
| "ignoring Timedia subdevice %04x for parport_serial\n", |
| dev->subsystem_device); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int pci_timedia_init(struct pci_dev *dev) |
| { |
| const unsigned short *ids; |
| int i, j; |
| |
| for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { |
| ids = timedia_data[i].ids; |
| for (j = 0; ids[j]; j++) |
| if (dev->subsystem_device == ids[j]) |
| return timedia_data[i].num; |
| } |
| return 0; |
| } |
| |
| /* |
| * Timedia/SUNIX uses a mixture of BARs and offsets |
| * Ugh, this is ugly as all hell --- TYT |
| */ |
| static int |
| pci_timedia_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar = 0, offset = board->first_offset; |
| |
| switch (idx) { |
| case 0: |
| bar = 0; |
| break; |
| case 1: |
| offset = board->uart_offset; |
| bar = 0; |
| break; |
| case 2: |
| bar = 1; |
| break; |
| case 3: |
| offset = board->uart_offset; |
| /* FALLTHROUGH */ |
| case 4: /* BAR 2 */ |
| case 5: /* BAR 3 */ |
| case 6: /* BAR 4 */ |
| case 7: /* BAR 5 */ |
| bar = idx - 2; |
| } |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| /* |
| * Some Titan cards are also a little weird |
| */ |
| static int |
| titan_400l_800l_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar, offset = board->first_offset; |
| |
| switch (idx) { |
| case 0: |
| bar = 1; |
| break; |
| case 1: |
| bar = 2; |
| break; |
| default: |
| bar = 4; |
| offset = (idx - 2) * board->uart_offset; |
| } |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| static int pci_xircom_init(struct pci_dev *dev) |
| { |
| msleep(100); |
| return 0; |
| } |
| |
| static int pci_ni8420_init(struct pci_dev *dev) |
| { |
| void __iomem *p; |
| unsigned int bar = 0; |
| |
| if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { |
| moan_device("no memory in bar", dev); |
| return 0; |
| } |
| |
| p = pci_ioremap_bar(dev, bar); |
| if (p == NULL) |
| return -ENOMEM; |
| |
| /* Enable CPU Interrupt */ |
| writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, |
| p + NI8420_INT_ENABLE_REG); |
| |
| iounmap(p); |
| return 0; |
| } |
| |
| #define MITE_IOWBSR1_WSIZE 0xa |
| #define MITE_IOWBSR1_WIN_OFFSET 0x800 |
| #define MITE_IOWBSR1_WENAB (1 << 7) |
| #define MITE_LCIMR1_IO_IE_0 (1 << 24) |
| #define MITE_LCIMR2_SET_CPU_IE (1 << 31) |
| #define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe |
| |
| static int pci_ni8430_init(struct pci_dev *dev) |
| { |
| void __iomem *p; |
| struct pci_bus_region region; |
| u32 device_window; |
| unsigned int bar = 0; |
| |
| if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { |
| moan_device("no memory in bar", dev); |
| return 0; |
| } |
| |
| p = pci_ioremap_bar(dev, bar); |
| if (p == NULL) |
| return -ENOMEM; |
| |
| /* |
| * Set device window address and size in BAR0, while acknowledging that |
| * the resource structure may contain a translated address that differs |
| * from the address the device responds to. |
| */ |
| pcibios_resource_to_bus(dev->bus, ®ion, &dev->resource[bar]); |
| device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) |
| | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; |
| writel(device_window, p + MITE_IOWBSR1); |
| |
| /* Set window access to go to RAMSEL IO address space */ |
| writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), |
| p + MITE_IOWCR1); |
| |
| /* Enable IO Bus Interrupt 0 */ |
| writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); |
| |
| /* Enable CPU Interrupt */ |
| writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); |
| |
| iounmap(p); |
| return 0; |
| } |
| |
| /* UART Port Control Register */ |
| #define NI8430_PORTCON 0x0f |
| #define NI8430_PORTCON_TXVR_ENABLE (1 << 3) |
| |
| static int |
| pci_ni8430_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| struct pci_dev *dev = priv->dev; |
| void __iomem *p; |
| unsigned int bar, offset = board->first_offset; |
| |
| if (idx >= board->num_ports) |
| return 1; |
| |
| bar = FL_GET_BASE(board->flags); |
| offset += idx * board->uart_offset; |
| |
| p = pci_ioremap_bar(dev, bar); |
| if (!p) |
| return -ENOMEM; |
| |
| /* enable the transceiver */ |
| writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, |
| p + offset + NI8430_PORTCON); |
| |
| iounmap(p); |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| static int pci_netmos_9900_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar; |
| |
| if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) && |
| (priv->dev->subsystem_device & 0xff00) == 0x3000) { |
| /* netmos apparently orders BARs by datasheet layout, so serial |
| * ports get BARs 0 and 3 (or 1 and 4 for memmapped) |
| */ |
| bar = 3 * idx; |
| |
| return setup_port(priv, port, bar, 0, board->reg_shift); |
| } else { |
| return pci_default_setup(priv, board, port, idx); |
| } |
| } |
| |
| /* the 99xx series comes with a range of device IDs and a variety |
| * of capabilities: |
| * |
| * 9900 has varying capabilities and can cascade to sub-controllers |
| * (cascading should be purely internal) |
| * 9904 is hardwired with 4 serial ports |
| * 9912 and 9922 are hardwired with 2 serial ports |
| */ |
| static int pci_netmos_9900_numports(struct pci_dev *dev) |
| { |
| unsigned int c = dev->class; |
| unsigned int pi; |
| unsigned short sub_serports; |
| |
| pi = (c & 0xff); |
| |
| if (pi == 2) { |
| return 1; |
| } else if ((pi == 0) && |
| (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { |
| /* two possibilities: 0x30ps encodes number of parallel and |
| * serial ports, or 0x1000 indicates *something*. This is not |
| * immediately obvious, since the 2s1p+4s configuration seems |
| * to offer all functionality on functions 0..2, while still |
| * advertising the same function 3 as the 4s+2s1p config. |
| */ |
| sub_serports = dev->subsystem_device & 0xf; |
| if (sub_serports > 0) { |
| return sub_serports; |
| } else { |
| dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); |
| return 0; |
| } |
| } |
| |
| moan_device("unknown NetMos/Mostech program interface", dev); |
| return 0; |
| } |
| |
| static int pci_netmos_init(struct pci_dev *dev) |
| { |
| /* subdevice 0x00PS means <P> parallel, <S> serial */ |
| unsigned int num_serial = dev->subsystem_device & 0xf; |
| |
| if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || |
| (dev->device == PCI_DEVICE_ID_NETMOS_9865)) |
| return 0; |
| |
| if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && |
| dev->subsystem_device == 0x0299) |
| return 0; |
| |
| switch (dev->device) { /* FALLTHROUGH on all */ |
| case PCI_DEVICE_ID_NETMOS_9904: |
| case PCI_DEVICE_ID_NETMOS_9912: |
| case PCI_DEVICE_ID_NETMOS_9922: |
| case PCI_DEVICE_ID_NETMOS_9900: |
| num_serial = pci_netmos_9900_numports(dev); |
| break; |
| |
| default: |
| if (num_serial == 0 ) { |
| moan_device("unknown NetMos/Mostech device", dev); |
| } |
| } |
| |
| if (num_serial == 0) |
| return -ENODEV; |
| |
| return num_serial; |
| } |
| |
| /* |
| * These chips are available with optionally one parallel port and up to |
| * two serial ports. Unfortunately they all have the same product id. |
| * |
| * Basic configuration is done over a region of 32 I/O ports. The base |
| * ioport is called INTA or INTC, depending on docs/other drivers. |
| * |
| * The region of the 32 I/O ports is configured in POSIO0R... |
| */ |
| |
| /* registers */ |
| #define ITE_887x_MISCR 0x9c |
| #define ITE_887x_INTCBAR 0x78 |
| #define ITE_887x_UARTBAR 0x7c |
| #define ITE_887x_PS0BAR 0x10 |
| #define ITE_887x_POSIO0 0x60 |
| |
| /* I/O space size */ |
| #define ITE_887x_IOSIZE 32 |
| /* I/O space size (bits 26-24; 8 bytes = 011b) */ |
| #define ITE_887x_POSIO_IOSIZE_8 (3 << 24) |
| /* I/O space size (bits 26-24; 32 bytes = 101b) */ |
| #define ITE_887x_POSIO_IOSIZE_32 (5 << 24) |
| /* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ |
| #define ITE_887x_POSIO_SPEED (3 << 29) |
| /* enable IO_Space bit */ |
| #define ITE_887x_POSIO_ENABLE (1 << 31) |
| |
| static int pci_ite887x_init(struct pci_dev *dev) |
| { |
| /* inta_addr are the configuration addresses of the ITE */ |
| static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, |
| 0x200, 0x280, 0 }; |
| int ret, i, type; |
| struct resource *iobase = NULL; |
| u32 miscr, uartbar, ioport; |
| |
| /* search for the base-ioport */ |
| i = 0; |
| while (inta_addr[i] && iobase == NULL) { |
| iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, |
| "ite887x"); |
| if (iobase != NULL) { |
| /* write POSIO0R - speed | size | ioport */ |
| pci_write_config_dword(dev, ITE_887x_POSIO0, |
| ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | |
| ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); |
| /* write INTCBAR - ioport */ |
| pci_write_config_dword(dev, ITE_887x_INTCBAR, |
| inta_addr[i]); |
| ret = inb(inta_addr[i]); |
| if (ret != 0xff) { |
| /* ioport connected */ |
| break; |
| } |
| release_region(iobase->start, ITE_887x_IOSIZE); |
| iobase = NULL; |
| } |
| i++; |
| } |
| |
| if (!inta_addr[i]) { |
| dev_err(&dev->dev, "ite887x: could not find iobase\n"); |
| return -ENODEV; |
| } |
| |
| /* start of undocumented type checking (see parport_pc.c) */ |
| type = inb(iobase->start + 0x18) & 0x0f; |
| |
| switch (type) { |
| case 0x2: /* ITE8871 (1P) */ |
| case 0xa: /* ITE8875 (1P) */ |
| ret = 0; |
| break; |
| case 0xe: /* ITE8872 (2S1P) */ |
| ret = 2; |
| break; |
| case 0x6: /* ITE8873 (1S) */ |
| ret = 1; |
| break; |
| case 0x8: /* ITE8874 (2S) */ |
| ret = 2; |
| break; |
| default: |
| moan_device("Unknown ITE887x", dev); |
| ret = -ENODEV; |
| } |
| |
| /* configure all serial ports */ |
| for (i = 0; i < ret; i++) { |
| /* read the I/O port from the device */ |
| pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), |
| &ioport); |
| ioport &= 0x0000FF00; /* the actual base address */ |
| pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), |
| ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | |
| ITE_887x_POSIO_IOSIZE_8 | ioport); |
| |
| /* write the ioport to the UARTBAR */ |
| pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); |
| uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ |
| uartbar |= (ioport << (16 * i)); /* set the ioport */ |
| pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); |
| |
| /* get current config */ |
| pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); |
| /* disable interrupts (UARTx_Routing[3:0]) */ |
| miscr &= ~(0xf << (12 - 4 * i)); |
| /* activate the UART (UARTx_En) */ |
| miscr |= 1 << (23 - i); |
| /* write new config with activated UART */ |
| pci_write_config_dword(dev, ITE_887x_MISCR, miscr); |
| } |
| |
| if (ret <= 0) { |
| /* the device has no UARTs if we get here */ |
| release_region(iobase->start, ITE_887x_IOSIZE); |
| } |
| |
| return ret; |
| } |
| |
| static void pci_ite887x_exit(struct pci_dev *dev) |
| { |
| u32 ioport; |
| /* the ioport is bit 0-15 in POSIO0R */ |
| pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); |
| ioport &= 0xffff; |
| release_region(ioport, ITE_887x_IOSIZE); |
| } |
| |
| /* |
| * EndRun Technologies. |
| * Determine the number of ports available on the device. |
| */ |
| #define PCI_VENDOR_ID_ENDRUN 0x7401 |
| #define PCI_DEVICE_ID_ENDRUN_1588 0xe100 |
| |
| static int pci_endrun_init(struct pci_dev *dev) |
| { |
| u8 __iomem *p; |
| unsigned long deviceID; |
| unsigned int number_uarts = 0; |
| |
| /* EndRun device is all 0xexxx */ |
| if (dev->vendor == PCI_VENDOR_ID_ENDRUN && |
| (dev->device & 0xf000) != 0xe000) |
| return 0; |
| |
| p = pci_iomap(dev, 0, 5); |
| if (p == NULL) |
| return -ENOMEM; |
| |
| deviceID = ioread32(p); |
| /* EndRun device */ |
| if (deviceID == 0x07000200) { |
| number_uarts = ioread8(p + 4); |
| dev_dbg(&dev->dev, |
| "%d ports detected on EndRun PCI Express device\n", |
| number_uarts); |
| } |
| pci_iounmap(dev, p); |
| return number_uarts; |
| } |
| |
| /* |
| * Oxford Semiconductor Inc. |
| * Check that device is part of the Tornado range of devices, then determine |
| * the number of ports available on the device. |
| */ |
| static int pci_oxsemi_tornado_init(struct pci_dev *dev) |
| { |
| u8 __iomem *p; |
| unsigned long deviceID; |
| unsigned int number_uarts = 0; |
| |
| /* OxSemi Tornado devices are all 0xCxxx */ |
| if (dev->vendor == PCI_VENDOR_ID_OXSEMI && |
| (dev->device & 0xF000) != 0xC000) |
| return 0; |
| |
| p = pci_iomap(dev, 0, 5); |
| if (p == NULL) |
| return -ENOMEM; |
| |
| deviceID = ioread32(p); |
| /* Tornado device */ |
| if (deviceID == 0x07000200) { |
| number_uarts = ioread8(p + 4); |
| dev_dbg(&dev->dev, |
| "%d ports detected on Oxford PCI Express device\n", |
| number_uarts); |
| } |
| pci_iounmap(dev, p); |
| return number_uarts; |
| } |
| |
| static int pci_asix_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| port->bugs |= UART_BUG_PARITY; |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| /* Quatech devices have their own extra interface features */ |
| |
| struct quatech_feature { |
| u16 devid; |
| bool amcc; |
| }; |
| |
| #define QPCR_TEST_FOR1 0x3F |
| #define QPCR_TEST_GET1 0x00 |
| #define QPCR_TEST_FOR2 0x40 |
| #define QPCR_TEST_GET2 0x40 |
| #define QPCR_TEST_FOR3 0x80 |
| #define QPCR_TEST_GET3 0x40 |
| #define QPCR_TEST_FOR4 0xC0 |
| #define QPCR_TEST_GET4 0x80 |
| |
| #define QOPR_CLOCK_X1 0x0000 |
| #define QOPR_CLOCK_X2 0x0001 |
| #define QOPR_CLOCK_X4 0x0002 |
| #define QOPR_CLOCK_X8 0x0003 |
| #define QOPR_CLOCK_RATE_MASK 0x0003 |
| |
| |
| static struct quatech_feature quatech_cards[] = { |
| { PCI_DEVICE_ID_QUATECH_QSC100, 1 }, |
| { PCI_DEVICE_ID_QUATECH_DSC100, 1 }, |
| { PCI_DEVICE_ID_QUATECH_DSC100E, 0 }, |
| { PCI_DEVICE_ID_QUATECH_DSC200, 1 }, |
| { PCI_DEVICE_ID_QUATECH_DSC200E, 0 }, |
| { PCI_DEVICE_ID_QUATECH_ESC100D, 1 }, |
| { PCI_DEVICE_ID_QUATECH_ESC100M, 1 }, |
| { PCI_DEVICE_ID_QUATECH_QSCP100, 1 }, |
| { PCI_DEVICE_ID_QUATECH_DSCP100, 1 }, |
| { PCI_DEVICE_ID_QUATECH_QSCP200, 1 }, |
| { PCI_DEVICE_ID_QUATECH_DSCP200, 1 }, |
| { PCI_DEVICE_ID_QUATECH_ESCLP100, 0 }, |
| { PCI_DEVICE_ID_QUATECH_QSCLP100, 0 }, |
| { PCI_DEVICE_ID_QUATECH_DSCLP100, 0 }, |
| { PCI_DEVICE_ID_QUATECH_SSCLP100, 0 }, |
| { PCI_DEVICE_ID_QUATECH_QSCLP200, 0 }, |
| { PCI_DEVICE_ID_QUATECH_DSCLP200, 0 }, |
| { PCI_DEVICE_ID_QUATECH_SSCLP200, 0 }, |
| { PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 }, |
| { 0, } |
| }; |
| |
| static int pci_quatech_amcc(u16 devid) |
| { |
| struct quatech_feature *qf = &quatech_cards[0]; |
| while (qf->devid) { |
| if (qf->devid == devid) |
| return qf->amcc; |
| qf++; |
| } |
| pr_err("quatech: unknown port type '0x%04X'.\n", devid); |
| return 0; |
| }; |
| |
| static int pci_quatech_rqopr(struct uart_8250_port *port) |
| { |
| unsigned long base = port->port.iobase; |
| u8 LCR, val; |
| |
| LCR = inb(base + UART_LCR); |
| outb(0xBF, base + UART_LCR); |
| val = inb(base + UART_SCR); |
| outb(LCR, base + UART_LCR); |
| return val; |
| } |
| |
| static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr) |
| { |
| unsigned long base = port->port.iobase; |
| u8 LCR, val; |
| |
| LCR = inb(base + UART_LCR); |
| outb(0xBF, base + UART_LCR); |
| val = inb(base + UART_SCR); |
| outb(qopr, base + UART_SCR); |
| outb(LCR, base + UART_LCR); |
| } |
| |
| static int pci_quatech_rqmcr(struct uart_8250_port *port) |
| { |
| unsigned long base = port->port.iobase; |
| u8 LCR, val, qmcr; |
| |
| LCR = inb(base + UART_LCR); |
| outb(0xBF, base + UART_LCR); |
| val = inb(base + UART_SCR); |
| outb(val | 0x10, base + UART_SCR); |
| qmcr = inb(base + UART_MCR); |
| outb(val, base + UART_SCR); |
| outb(LCR, base + UART_LCR); |
| |
| return qmcr; |
| } |
| |
| static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr) |
| { |
| unsigned long base = port->port.iobase; |
| u8 LCR, val; |
| |
| LCR = inb(base + UART_LCR); |
| outb(0xBF, base + UART_LCR); |
| val = inb(base + UART_SCR); |
| outb(val | 0x10, base + UART_SCR); |
| outb(qmcr, base + UART_MCR); |
| outb(val, base + UART_SCR); |
| outb(LCR, base + UART_LCR); |
| } |
| |
| static int pci_quatech_has_qmcr(struct uart_8250_port *port) |
| { |
| unsigned long base = port->port.iobase; |
| u8 LCR, val; |
| |
| LCR = inb(base + UART_LCR); |
| outb(0xBF, base + UART_LCR); |
| val = inb(base + UART_SCR); |
| if (val & 0x20) { |
| outb(0x80, UART_LCR); |
| if (!(inb(UART_SCR) & 0x20)) { |
| outb(LCR, base + UART_LCR); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static int pci_quatech_test(struct uart_8250_port *port) |
| { |
| u8 reg; |
| u8 qopr = pci_quatech_rqopr(port); |
| pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1); |
| reg = pci_quatech_rqopr(port) & 0xC0; |
| if (reg != QPCR_TEST_GET1) |
| return -EINVAL; |
| pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2); |
| reg = pci_quatech_rqopr(port) & 0xC0; |
| if (reg != QPCR_TEST_GET2) |
| return -EINVAL; |
| pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3); |
| reg = pci_quatech_rqopr(port) & 0xC0; |
| if (reg != QPCR_TEST_GET3) |
| return -EINVAL; |
| pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4); |
| reg = pci_quatech_rqopr(port) & 0xC0; |
| if (reg != QPCR_TEST_GET4) |
| return -EINVAL; |
| |
| pci_quatech_wqopr(port, qopr); |
| return 0; |
| } |
| |
| static int pci_quatech_clock(struct uart_8250_port *port) |
| { |
| u8 qopr, reg, set; |
| unsigned long clock; |
| |
| if (pci_quatech_test(port) < 0) |
| return 1843200; |
| |
| qopr = pci_quatech_rqopr(port); |
| |
| pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8); |
| reg = pci_quatech_rqopr(port); |
| if (reg & QOPR_CLOCK_X8) { |
| clock = 1843200; |
| goto out; |
| } |
| pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8); |
| reg = pci_quatech_rqopr(port); |
| if (!(reg & QOPR_CLOCK_X8)) { |
| clock = 1843200; |
| goto out; |
| } |
| reg &= QOPR_CLOCK_X8; |
| if (reg == QOPR_CLOCK_X2) { |
| clock = 3685400; |
| set = QOPR_CLOCK_X2; |
| } else if (reg == QOPR_CLOCK_X4) { |
| clock = 7372800; |
| set = QOPR_CLOCK_X4; |
| } else if (reg == QOPR_CLOCK_X8) { |
| clock = 14745600; |
| set = QOPR_CLOCK_X8; |
| } else { |
| clock = 1843200; |
| set = QOPR_CLOCK_X1; |
| } |
| qopr &= ~QOPR_CLOCK_RATE_MASK; |
| qopr |= set; |
| |
| out: |
| pci_quatech_wqopr(port, qopr); |
| return clock; |
| } |
| |
| static int pci_quatech_rs422(struct uart_8250_port *port) |
| { |
| u8 qmcr; |
| int rs422 = 0; |
| |
| if (!pci_quatech_has_qmcr(port)) |
| return 0; |
| qmcr = pci_quatech_rqmcr(port); |
| pci_quatech_wqmcr(port, 0xFF); |
| if (pci_quatech_rqmcr(port)) |
| rs422 = 1; |
| pci_quatech_wqmcr(port, qmcr); |
| return rs422; |
| } |
| |
| static int pci_quatech_init(struct pci_dev *dev) |
| { |
| if (pci_quatech_amcc(dev->device)) { |
| unsigned long base = pci_resource_start(dev, 0); |
| if (base) { |
| u32 tmp; |
| outl(inl(base + 0x38) | 0x00002000, base + 0x38); |
| tmp = inl(base + 0x3c); |
| outl(tmp | 0x01000000, base + 0x3c); |
| outl(tmp &= ~0x01000000, base + 0x3c); |
| } |
| } |
| return 0; |
| } |
| |
| static int pci_quatech_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| /* Needed by pci_quatech calls below */ |
| port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags)); |
| /* Set up the clocking */ |
| port->port.uartclk = pci_quatech_clock(port); |
| /* For now just warn about RS422 */ |
| if (pci_quatech_rs422(port)) |
| pr_warn("quatech: software control of RS422 features not currently supported.\n"); |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| static void pci_quatech_exit(struct pci_dev *dev) |
| { |
| } |
| |
| static int pci_default_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar, offset = board->first_offset, maxnr; |
| |
| bar = FL_GET_BASE(board->flags); |
| if (board->flags & FL_BASE_BARS) |
| bar += idx; |
| else |
| offset += idx * board->uart_offset; |
| |
| maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> |
| (board->reg_shift + 3); |
| |
| if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) |
| return 1; |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| static int pci_pericom_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| unsigned int bar, offset = board->first_offset, maxnr; |
| |
| bar = FL_GET_BASE(board->flags); |
| if (board->flags & FL_BASE_BARS) |
| bar += idx; |
| else |
| offset += idx * board->uart_offset; |
| |
| maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> |
| (board->reg_shift + 3); |
| |
| if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) |
| return 1; |
| |
| port->port.uartclk = 14745600; |
| |
| return setup_port(priv, port, bar, offset, board->reg_shift); |
| } |
| |
| static int |
| ce4100_serial_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| int ret; |
| |
| ret = setup_port(priv, port, idx, 0, board->reg_shift); |
| port->port.iotype = UPIO_MEM32; |
| port->port.type = PORT_XSCALE; |
| port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); |
| port->port.regshift = 2; |
| |
| return ret; |
| } |
| |
| #define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a |
| #define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c |
| |
| #define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a |
| #define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c |
| |
| #define BYT_PRV_CLK 0x800 |
| #define BYT_PRV_CLK_EN (1 << 0) |
| #define BYT_PRV_CLK_M_VAL_SHIFT 1 |
| #define BYT_PRV_CLK_N_VAL_SHIFT 16 |
| #define BYT_PRV_CLK_UPDATE (1 << 31) |
| |
| #define BYT_TX_OVF_INT 0x820 |
| #define BYT_TX_OVF_INT_MASK (1 << 1) |
| |
| static void |
| byt_set_termios(struct uart_port *p, struct ktermios *termios, |
| struct ktermios *old) |
| { |
| unsigned int baud = tty_termios_baud_rate(termios); |
| unsigned long fref = 100000000, fuart = baud * 16; |
| unsigned long w = BIT(15) - 1; |
| unsigned long m, n; |
| u32 reg; |
| |
| /* Get Fuart closer to Fref */ |
| fuart *= rounddown_pow_of_two(fref / fuart); |
| |
| /* |
| * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the |
| * dividers must be adjusted. |
| * |
| * uartclk = (m / n) * 100 MHz, where m <= n |
| */ |
| rational_best_approximation(fuart, fref, w, w, &m, &n); |
| p->uartclk = fuart; |
| |
| /* Reset the clock */ |
| reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT); |
| writel(reg, p->membase + BYT_PRV_CLK); |
| reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE; |
| writel(reg, p->membase + BYT_PRV_CLK); |
| |
| serial8250_do_set_termios(p, termios, old); |
| } |
| |
| static bool byt_dma_filter(struct dma_chan *chan, void *param) |
| { |
| struct dw_dma_slave *dws = param; |
| |
| if (dws->dma_dev != chan->device->dev) |
| return false; |
| |
| chan->private = dws; |
| return true; |
| } |
| |
| static int |
| byt_serial_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| struct pci_dev *pdev = priv->dev; |
| struct device *dev = port->port.dev; |
| struct uart_8250_dma *dma; |
| struct dw_dma_slave *tx_param, *rx_param; |
| struct pci_dev *dma_dev; |
| int ret; |
| |
| dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); |
| if (!dma) |
| return -ENOMEM; |
| |
| tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); |
| if (!tx_param) |
| return -ENOMEM; |
| |
| rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); |
| if (!rx_param) |
| return -ENOMEM; |
| |
| switch (pdev->device) { |
| case PCI_DEVICE_ID_INTEL_BYT_UART1: |
| case PCI_DEVICE_ID_INTEL_BSW_UART1: |
| rx_param->src_id = 3; |
| tx_param->dst_id = 2; |
| break; |
| case PCI_DEVICE_ID_INTEL_BYT_UART2: |
| case PCI_DEVICE_ID_INTEL_BSW_UART2: |
| rx_param->src_id = 5; |
| tx_param->dst_id = 4; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| rx_param->src_master = 1; |
| rx_param->dst_master = 0; |
| |
| dma->rxconf.src_maxburst = 16; |
| |
| tx_param->src_master = 1; |
| tx_param->dst_master = 0; |
| |
| dma->txconf.dst_maxburst = 16; |
| |
| dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); |
| rx_param->dma_dev = &dma_dev->dev; |
| tx_param->dma_dev = &dma_dev->dev; |
| |
| dma->fn = byt_dma_filter; |
| dma->rx_param = rx_param; |
| dma->tx_param = tx_param; |
| |
| ret = pci_default_setup(priv, board, port, idx); |
| port->port.iotype = UPIO_MEM; |
| port->port.type = PORT_16550A; |
| port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); |
| port->port.set_termios = byt_set_termios; |
| port->port.fifosize = 64; |
| port->tx_loadsz = 64; |
| port->dma = dma; |
| port->capabilities = UART_CAP_FIFO | UART_CAP_AFE; |
| |
| /* Disable Tx counter interrupts */ |
| writel(BYT_TX_OVF_INT_MASK, port->port.membase + BYT_TX_OVF_INT); |
| |
| return ret; |
| } |
| |
| #define INTEL_MID_UART_PS 0x30 |
| #define INTEL_MID_UART_MUL 0x34 |
| #define INTEL_MID_UART_DIV 0x38 |
| |
| static void intel_mid_set_termios(struct uart_port *p, |
| struct ktermios *termios, |
| struct ktermios *old, |
| unsigned long fref) |
| { |
| unsigned int baud = tty_termios_baud_rate(termios); |
| unsigned short ps = 16; |
| unsigned long fuart = baud * ps; |
| unsigned long w = BIT(24) - 1; |
| unsigned long mul, div; |
| |
| if (fref < fuart) { |
| /* Find prescaler value that satisfies Fuart < Fref */ |
| if (fref > baud) |
| ps = fref / baud; /* baud rate too high */ |
| else |
| ps = 1; /* PLL case */ |
| fuart = baud * ps; |
| } else { |
| /* Get Fuart closer to Fref */ |
| fuart *= rounddown_pow_of_two(fref / fuart); |
| } |
| |
| rational_best_approximation(fuart, fref, w, w, &mul, &div); |
| p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */ |
| |
| writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */ |
| writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */ |
| writel(div, p->membase + INTEL_MID_UART_DIV); |
| |
| serial8250_do_set_termios(p, termios, old); |
| } |
| |
| static void intel_mid_set_termios_38_4M(struct uart_port *p, |
| struct ktermios *termios, |
| struct ktermios *old) |
| { |
| intel_mid_set_termios(p, termios, old, 38400000); |
| } |
| |
| static void intel_mid_set_termios_50M(struct uart_port *p, |
| struct ktermios *termios, |
| struct ktermios *old) |
| { |
| /* |
| * The uart clk is 50Mhz, and the baud rate come from: |
| * baud = 50M * MUL / (DIV * PS * DLAB) |
| */ |
| intel_mid_set_termios(p, termios, old, 50000000); |
| } |
| |
| static bool intel_mid_dma_filter(struct dma_chan *chan, void *param) |
| { |
| struct hsu_dma_slave *s = param; |
| |
| if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id) |
| return false; |
| |
| chan->private = s; |
| return true; |
| } |
| |
| static int intel_mid_serial_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx, |
| int index, struct pci_dev *dma_dev) |
| { |
| struct device *dev = port->port.dev; |
| struct uart_8250_dma *dma; |
| struct hsu_dma_slave *tx_param, *rx_param; |
| |
| dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); |
| if (!dma) |
| return -ENOMEM; |
| |
| tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL); |
| if (!tx_param) |
| return -ENOMEM; |
| |
| rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); |
| if (!rx_param) |
| return -ENOMEM; |
| |
| rx_param->chan_id = index * 2 + 1; |
| tx_param->chan_id = index * 2; |
| |
| dma->rxconf.src_maxburst = 64; |
| dma->txconf.dst_maxburst = 64; |
| |
| rx_param->dma_dev = &dma_dev->dev; |
| tx_param->dma_dev = &dma_dev->dev; |
| |
| dma->fn = intel_mid_dma_filter; |
| dma->rx_param = rx_param; |
| dma->tx_param = tx_param; |
| |
| port->port.type = PORT_16750; |
| port->port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; |
| port->dma = dma; |
| |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| #define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b |
| #define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c |
| #define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d |
| |
| static int pnw_serial_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| struct pci_dev *pdev = priv->dev; |
| struct pci_dev *dma_dev; |
| int index; |
| |
| switch (pdev->device) { |
| case PCI_DEVICE_ID_INTEL_PNW_UART1: |
| index = 0; |
| break; |
| case PCI_DEVICE_ID_INTEL_PNW_UART2: |
| index = 1; |
| break; |
| case PCI_DEVICE_ID_INTEL_PNW_UART3: |
| index = 2; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 3)); |
| |
| port->port.set_termios = intel_mid_set_termios_50M; |
| |
| return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev); |
| } |
| |
| #define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191 |
| |
| static int tng_serial_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| struct pci_dev *pdev = priv->dev; |
| struct pci_dev *dma_dev; |
| int index = PCI_FUNC(pdev->devfn); |
| |
| /* Currently no support for HSU port0 */ |
| if (index-- == 0) |
| return -ENODEV; |
| |
| dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0)); |
| |
| port->port.set_termios = intel_mid_set_termios_38_4M; |
| |
| return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev); |
| } |
| |
| static int |
| pci_omegapci_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| return setup_port(priv, port, 2, idx * 8, 0); |
| } |
| |
| static int |
| pci_brcm_trumanage_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| int ret = pci_default_setup(priv, board, port, idx); |
| |
| port->port.type = PORT_BRCM_TRUMANAGE; |
| port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); |
| return ret; |
| } |
| |
| static int pci_fintek_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| struct pci_dev *pdev = priv->dev; |
| u8 config_base; |
| u16 iobase; |
| |
| config_base = 0x40 + 0x08 * idx; |
| |
| /* Get the io address from configuration space */ |
| pci_read_config_word(pdev, config_base + 4, &iobase); |
| |
| dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase); |
| |
| port->port.iotype = UPIO_PORT; |
| port->port.iobase = iobase; |
| |
| return 0; |
| } |
| |
| static int pci_fintek_init(struct pci_dev *dev) |
| { |
| unsigned long iobase; |
| u32 max_port, i; |
| u32 bar_data[3]; |
| u8 config_base; |
| |
| switch (dev->device) { |
| case 0x1104: /* 4 ports */ |
| case 0x1108: /* 8 ports */ |
| max_port = dev->device & 0xff; |
| break; |
| case 0x1112: /* 12 ports */ |
| max_port = 12; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Get the io address dispatch from the BIOS */ |
| pci_read_config_dword(dev, 0x24, &bar_data[0]); |
| pci_read_config_dword(dev, 0x20, &bar_data[1]); |
| pci_read_config_dword(dev, 0x1c, &bar_data[2]); |
| |
| for (i = 0; i < max_port; ++i) { |
| /* UART0 configuration offset start from 0x40 */ |
| config_base = 0x40 + 0x08 * i; |
| |
| /* Calculate Real IO Port */ |
| iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8; |
| |
| /* Enable UART I/O port */ |
| pci_write_config_byte(dev, config_base + 0x00, 0x01); |
| |
| /* Select 128-byte FIFO and 8x FIFO threshold */ |
| pci_write_config_byte(dev, config_base + 0x01, 0x33); |
| |
| /* LSB UART */ |
| pci_write_config_byte(dev, config_base + 0x04, |
| (u8)(iobase & 0xff)); |
| |
| /* MSB UART */ |
| pci_write_config_byte(dev, config_base + 0x05, |
| (u8)((iobase & 0xff00) >> 8)); |
| |
| pci_write_config_byte(dev, config_base + 0x06, dev->irq); |
| } |
| |
| return max_port; |
| } |
| |
| static int skip_tx_en_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| port->port.flags |= UPF_NO_TXEN_TEST; |
| dev_dbg(&priv->dev->dev, |
| "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", |
| priv->dev->vendor, priv->dev->device, |
| priv->dev->subsystem_vendor, priv->dev->subsystem_device); |
| |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| static void kt_handle_break(struct uart_port *p) |
| { |
| struct uart_8250_port *up = up_to_u8250p(p); |
| /* |
| * On receipt of a BI, serial device in Intel ME (Intel |
| * management engine) needs to have its fifos cleared for sane |
| * SOL (Serial Over Lan) output. |
| */ |
| serial8250_clear_and_reinit_fifos(up); |
| } |
| |
| static unsigned int kt_serial_in(struct uart_port *p, int offset) |
| { |
| struct uart_8250_port *up = up_to_u8250p(p); |
| unsigned int val; |
| |
| /* |
| * When the Intel ME (management engine) gets reset its serial |
| * port registers could return 0 momentarily. Functions like |
| * serial8250_console_write, read and save the IER, perform |
| * some operation and then restore it. In order to avoid |
| * setting IER register inadvertently to 0, if the value read |
| * is 0, double check with ier value in uart_8250_port and use |
| * that instead. up->ier should be the same value as what is |
| * currently configured. |
| */ |
| val = inb(p->iobase + offset); |
| if (offset == UART_IER) { |
| if (val == 0) |
| val = up->ier; |
| } |
| return val; |
| } |
| |
| static int kt_serial_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| port->port.flags |= UPF_BUG_THRE; |
| port->port.serial_in = kt_serial_in; |
| port->port.handle_break = kt_handle_break; |
| return skip_tx_en_setup(priv, board, port, idx); |
| } |
| |
| static int pci_eg20t_init(struct pci_dev *dev) |
| { |
| #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) |
| return -ENODEV; |
| #else |
| return 0; |
| #endif |
| } |
| |
| static int |
| pci_xr17c154_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| port->port.flags |= UPF_EXAR_EFR; |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| static int |
| pci_xr17v35x_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| u8 __iomem *p; |
| |
| p = pci_ioremap_bar(priv->dev, 0); |
| if (p == NULL) |
| return -ENOMEM; |
| |
| port->port.flags |= UPF_EXAR_EFR; |
| |
| /* |
| * Setup Multipurpose Input/Output pins. |
| */ |
| if (idx == 0) { |
| writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/ |
| writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/ |
| writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/ |
| writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/ |
| writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/ |
| writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/ |
| writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/ |
| writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/ |
| writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/ |
| writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/ |
| writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/ |
| writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/ |
| } |
| writeb(0x00, p + UART_EXAR_8XMODE); |
| writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); |
| writeb(128, p + UART_EXAR_TXTRG); |
| writeb(128, p + UART_EXAR_RXTRG); |
| iounmap(p); |
| |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| #define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004 |
| #define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002 |
| #define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a |
| #define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b |
| |
| static int |
| pci_fastcom335_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| u8 __iomem *p; |
| |
| p = pci_ioremap_bar(priv->dev, 0); |
| if (p == NULL) |
| return -ENOMEM; |
| |
| port->port.flags |= UPF_EXAR_EFR; |
| |
| /* |
| * Setup Multipurpose Input/Output pins. |
| */ |
| if (idx == 0) { |
| switch (priv->dev->device) { |
| case PCI_DEVICE_ID_COMMTECH_4222PCI335: |
| case PCI_DEVICE_ID_COMMTECH_4224PCI335: |
| writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */ |
| writeb(0x00, p + 0x92); /* MPIOINV[7:0] */ |
| writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */ |
| break; |
| case PCI_DEVICE_ID_COMMTECH_2324PCI335: |
| case PCI_DEVICE_ID_COMMTECH_2328PCI335: |
| writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */ |
| writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */ |
| writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */ |
| break; |
| } |
| writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */ |
| writeb(0x00, p + 0x91); /* MPIO3T[7:0] */ |
| writeb(0x00, p + 0x94); /* MPIOOD[7:0] */ |
| } |
| writeb(0x00, p + UART_EXAR_8XMODE); |
| writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR); |
| writeb(32, p + UART_EXAR_TXTRG); |
| writeb(32, p + UART_EXAR_RXTRG); |
| iounmap(p); |
| |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| static int |
| pci_wch_ch353_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| port->port.flags |= UPF_FIXED_TYPE; |
| port->port.type = PORT_16550A; |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| static int |
| pci_wch_ch38x_setup(struct serial_private *priv, |
| const struct pciserial_board *board, |
| struct uart_8250_port *port, int idx) |
| { |
| port->port.flags |= UPF_FIXED_TYPE; |
| port->port.type = PORT_16850; |
| return pci_default_setup(priv, board, port, idx); |
| } |
| |
| #define PCI_VENDOR_ID_SBSMODULARIO 0x124B |
| #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B |
| #define PCI_DEVICE_ID_OCTPRO 0x0001 |
| #define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 |
| #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 |
| #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 |
| #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 |
| #define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500 |
| #define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530 |
| #define PCI_VENDOR_ID_ADVANTECH 0x13fe |
| #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 |
| #define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 |
| #define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 |
| #define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 |
| #define PCI_DEVICE_ID_TITAN_200I 0x8028 |
| #define PCI_DEVICE_ID_TITAN_400I 0x8048 |
| #define PCI_DEVICE_ID_TITAN_800I 0x8088 |
| #define PCI_DEVICE_ID_TITAN_800EH 0xA007 |
| #define PCI_DEVICE_ID_TITAN_800EHB 0xA008 |
| #define PCI_DEVICE_ID_TITAN_400EH 0xA009 |
| #define PCI_DEVICE_ID_TITAN_100E 0xA010 |
| #define PCI_DEVICE_ID_TITAN_200E 0xA012 |
| #define PCI_DEVICE_ID_TITAN_400E 0xA013 |
| #define PCI_DEVICE_ID_TITAN_800E 0xA014 |
| #define PCI_DEVICE_ID_TITAN_200EI 0xA016 |
| #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 |
| #define PCI_DEVICE_ID_TITAN_200V3 0xA306 |
| #define PCI_DEVICE_ID_TITAN_400V3 0xA310 |
| #define PCI_DEVICE_ID_TITAN_410V3 0xA312 |
| #define PCI_DEVICE_ID_TITAN_800V3 0xA314 |
| #define PCI_DEVICE_ID_TITAN_800V3B 0xA315 |
| #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 |
| #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 |
| #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 |
| #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d |
| #define PCI_VENDOR_ID_WCH 0x4348 |
| #define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 |
| #define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 |
| #define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 |
| #define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053 |
| #define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 |
| #define PCI_VENDOR_ID_AGESTAR 0x5372 |
| #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 |
| #define PCI_VENDOR_ID_ASIX 0x9710 |
| #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 |
| #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 |
| #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 |
| #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a |
| #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e |
| #define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936 |
| |
| #define PCI_VENDOR_ID_SUNIX 0x1fd4 |
| #define PCI_DEVICE_ID_SUNIX_1999 0x1999 |
| |
| #define PCIE_VENDOR_ID_WCH 0x1c00 |
| #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 |
| #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 |
| |
| /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ |
| #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 |
| #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 |
| |
| /* |
| * Master list of serial port init/setup/exit quirks. |
| * This does not describe the general nature of the port. |
| * (ie, baud base, number and location of ports, etc) |
| * |
| * This list is ordered alphabetically by vendor then device. |
| * Specific entries must come before more generic entries. |
| */ |
| static struct pci_serial_quirk pci_serial_quirks[] __refdata = { |
| /* |
| * ADDI-DATA GmbH communication cards <info@addi-data.com> |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_AMCC, |
| .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = addidata_apci7800_setup, |
| }, |
| /* |
| * AFAVLAB cards - these may be called via parport_serial |
| * It is not clear whether this applies to all products. |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_AFAVLAB, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = afavlab_setup, |
| }, |
| /* |
| * HP Diva |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_HP, |
| .device = PCI_DEVICE_ID_HP_DIVA, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_hp_diva_init, |
| .setup = pci_hp_diva_setup, |
| }, |
| /* |
| * Intel |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_80960_RP, |
| .subvendor = 0xe4bf, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_inteli960ni_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_8257X_SOL, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = skip_tx_en_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_82573L_SOL, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = skip_tx_en_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_82573E_SOL, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = skip_tx_en_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_CE4100_UART, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = ce4100_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = kt_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_BYT_UART1, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = byt_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_BYT_UART2, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = byt_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_PNW_UART1, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pnw_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_PNW_UART2, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pnw_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_PNW_UART3, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pnw_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_TNG_UART, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = tng_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_BSW_UART1, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = byt_serial_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_BSW_UART2, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = byt_serial_setup, |
| }, |
| /* |
| * ITE |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_ITE, |
| .device = PCI_DEVICE_ID_ITE_8872, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ite887x_init, |
| .setup = pci_default_setup, |
| .exit = pci_ite887x_exit, |
| }, |
| /* |
| * National Instruments |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PCI23216, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PCI2328, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PCI2324, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PCI2322, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PCI2324I, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PCI2322I, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PXI8420_23216, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PXI8420_2328, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PXI8420_2324, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PXI8420_2322, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PXI8422_2324, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_DEVICE_ID_NI_PXI8422_2322, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8420_init, |
| .setup = pci_default_setup, |
| .exit = pci_ni8420_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_NI, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_ni8430_init, |
| .setup = pci_ni8430_setup, |
| .exit = pci_ni8430_exit, |
| }, |
| /* Quatech */ |
| { |
| .vendor = PCI_VENDOR_ID_QUATECH, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_quatech_init, |
| .setup = pci_quatech_setup, |
| .exit = pci_quatech_exit, |
| }, |
| /* |
| * Panacom |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_PANACOM, |
| .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_plx9050_init, |
| .setup = pci_default_setup, |
| .exit = pci_plx9050_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_PANACOM, |
| .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_plx9050_init, |
| .setup = pci_default_setup, |
| .exit = pci_plx9050_exit, |
| }, |
| /* |
| * Pericom |
| */ |
| { |
| .vendor = 0x12d8, |
| .device = 0x7952, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_pericom_setup, |
| }, |
| { |
| .vendor = 0x12d8, |
| .device = 0x7954, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_pericom_setup, |
| }, |
| { |
| .vendor = 0x12d8, |
| .device = 0x7958, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_pericom_setup, |
| }, |
| |
| /* |
| * PLX |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_PLX, |
| .device = PCI_DEVICE_ID_PLX_9050, |
| .subvendor = PCI_SUBVENDOR_ID_EXSYS, |
| .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, |
| .init = pci_plx9050_init, |
| .setup = pci_default_setup, |
| .exit = pci_plx9050_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_PLX, |
| .device = PCI_DEVICE_ID_PLX_9050, |
| .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, |
| .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, |
| .init = pci_plx9050_init, |
| .setup = pci_default_setup, |
| .exit = pci_plx9050_exit, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_PLX, |
| .device = PCI_DEVICE_ID_PLX_ROMULUS, |
| .subvendor = PCI_VENDOR_ID_PLX, |
| .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, |
| .init = pci_plx9050_init, |
| .setup = pci_default_setup, |
| .exit = pci_plx9050_exit, |
| }, |
| /* |
| * SBS Technologies, Inc., PMC-OCTALPRO 232 |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_SBSMODULARIO, |
| .device = PCI_DEVICE_ID_OCTPRO, |
| .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, |
| .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, |
| .init = sbs_init, |
| .setup = sbs_setup, |
| .exit = sbs_exit, |
| }, |
| /* |
| * SBS Technologies, Inc., PMC-OCTALPRO 422 |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_SBSMODULARIO, |
| .device = PCI_DEVICE_ID_OCTPRO, |
| .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, |
| .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, |
| .init = sbs_init, |
| .setup = sbs_setup, |
| .exit = sbs_exit, |
| }, |
| /* |
| * SBS Technologies, Inc., P-Octal 232 |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_SBSMODULARIO, |
| .device = PCI_DEVICE_ID_OCTPRO, |
| .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, |
| .subdevice = PCI_SUBDEVICE_ID_POCTAL232, |
| .init = sbs_init, |
| .setup = sbs_setup, |
| .exit = sbs_exit, |
| }, |
| /* |
| * SBS Technologies, Inc., P-Octal 422 |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_SBSMODULARIO, |
| .device = PCI_DEVICE_ID_OCTPRO, |
| .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, |
| .subdevice = PCI_SUBDEVICE_ID_POCTAL422, |
| .init = sbs_init, |
| .setup = sbs_setup, |
| .exit = sbs_exit, |
| }, |
| /* |
| * SIIG cards - these may be called via parport_serial |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_SIIG, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_siig_init, |
| .setup = pci_siig_setup, |
| }, |
| /* |
| * Titan cards |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_TITAN, |
| .device = PCI_DEVICE_ID_TITAN_400L, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = titan_400l_800l_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_TITAN, |
| .device = PCI_DEVICE_ID_TITAN_800L, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = titan_400l_800l_setup, |
| }, |
| /* |
| * Timedia cards |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_TIMEDIA, |
| .device = PCI_DEVICE_ID_TIMEDIA_1889, |
| .subvendor = PCI_VENDOR_ID_TIMEDIA, |
| .subdevice = PCI_ANY_ID, |
| .probe = pci_timedia_probe, |
| .init = pci_timedia_init, |
| .setup = pci_timedia_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_TIMEDIA, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_timedia_setup, |
| }, |
| /* |
| * SUNIX (Timedia) cards |
| * Do not "probe" for these cards as there is at least one combination |
| * card that should be handled by parport_pc that doesn't match the |
| * rule in pci_timedia_probe. |
| * It is part number is MIO5079A but its subdevice ID is 0x0102. |
| * There are some boards with part number SER5037AL that report |
| * subdevice ID 0x0002. |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_SUNIX, |
| .device = PCI_DEVICE_ID_SUNIX_1999, |
| .subvendor = PCI_VENDOR_ID_SUNIX, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_timedia_init, |
| .setup = pci_timedia_setup, |
| }, |
| /* |
| * Exar cards |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_EXAR, |
| .device = PCI_DEVICE_ID_EXAR_XR17C152, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17c154_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_EXAR, |
| .device = PCI_DEVICE_ID_EXAR_XR17C154, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17c154_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_EXAR, |
| .device = PCI_DEVICE_ID_EXAR_XR17C158, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17c154_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_EXAR, |
| .device = PCI_DEVICE_ID_EXAR_XR17V352, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17v35x_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_EXAR, |
| .device = PCI_DEVICE_ID_EXAR_XR17V354, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17v35x_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_EXAR, |
| .device = PCI_DEVICE_ID_EXAR_XR17V358, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17v35x_setup, |
| }, |
| /* |
| * Xircom cards |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_XIRCOM, |
| .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_xircom_init, |
| .setup = pci_default_setup, |
| }, |
| /* |
| * Netmos cards - these may be called via parport_serial |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_NETMOS, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_netmos_init, |
| .setup = pci_netmos_9900_setup, |
| }, |
| /* |
| * EndRun Technologies |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_ENDRUN, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_endrun_init, |
| .setup = pci_default_setup, |
| }, |
| /* |
| * For Oxford Semiconductor Tornado based devices |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_OXSEMI, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_oxsemi_tornado_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_MAINPINE, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_oxsemi_tornado_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_DIGI, |
| .device = PCIE_DEVICE_ID_NEO_2_OX_IBM, |
| .subvendor = PCI_SUBVENDOR_ID_IBM, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_oxsemi_tornado_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = 0x8811, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = 0x8812, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = 0x8813, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = 0x8814, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = 0x10DB, |
| .device = 0x8027, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = 0x10DB, |
| .device = 0x8028, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = 0x10DB, |
| .device = 0x8029, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = 0x10DB, |
| .device = 0x800C, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| { |
| .vendor = 0x10DB, |
| .device = 0x800D, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .init = pci_eg20t_init, |
| .setup = pci_default_setup, |
| }, |
| /* |
| * Cronyx Omega PCI (PLX-chip based) |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_PLX, |
| .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_omegapci_setup, |
| }, |
| /* WCH CH353 1S1P card (16550 clone) */ |
| { |
| .vendor = PCI_VENDOR_ID_WCH, |
| .device = PCI_DEVICE_ID_WCH_CH353_1S1P, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_wch_ch353_setup, |
| }, |
| /* WCH CH353 2S1P card (16550 clone) */ |
| { |
| .vendor = PCI_VENDOR_ID_WCH, |
| .device = PCI_DEVICE_ID_WCH_CH353_2S1P, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_wch_ch353_setup, |
| }, |
| /* WCH CH353 4S card (16550 clone) */ |
| { |
| .vendor = PCI_VENDOR_ID_WCH, |
| .device = PCI_DEVICE_ID_WCH_CH353_4S, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_wch_ch353_setup, |
| }, |
| /* WCH CH353 2S1PF card (16550 clone) */ |
| { |
| .vendor = PCI_VENDOR_ID_WCH, |
| .device = PCI_DEVICE_ID_WCH_CH353_2S1PF, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_wch_ch353_setup, |
| }, |
| /* WCH CH352 2S card (16550 clone) */ |
| { |
| .vendor = PCI_VENDOR_ID_WCH, |
| .device = PCI_DEVICE_ID_WCH_CH352_2S, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_wch_ch353_setup, |
| }, |
| /* WCH CH382 2S1P card (16850 clone) */ |
| { |
| .vendor = PCIE_VENDOR_ID_WCH, |
| .device = PCIE_DEVICE_ID_WCH_CH382_2S1P, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_wch_ch38x_setup, |
| }, |
| /* WCH CH384 4S card (16850 clone) */ |
| { |
| .vendor = PCIE_VENDOR_ID_WCH, |
| .device = PCIE_DEVICE_ID_WCH_CH384_4S, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_wch_ch38x_setup, |
| }, |
| /* |
| * ASIX devices with FIFO bug |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_ASIX, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_asix_setup, |
| }, |
| /* |
| * Commtech, Inc. Fastcom adapters |
| * |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_COMMTECH, |
| .device = PCI_DEVICE_ID_COMMTECH_4222PCI335, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_fastcom335_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_COMMTECH, |
| .device = PCI_DEVICE_ID_COMMTECH_4224PCI335, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_fastcom335_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_COMMTECH, |
| .device = PCI_DEVICE_ID_COMMTECH_2324PCI335, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_fastcom335_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_COMMTECH, |
| .device = PCI_DEVICE_ID_COMMTECH_2328PCI335, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_fastcom335_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_COMMTECH, |
| .device = PCI_DEVICE_ID_COMMTECH_4222PCIE, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17v35x_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_COMMTECH, |
| .device = PCI_DEVICE_ID_COMMTECH_4224PCIE, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17v35x_setup, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_COMMTECH, |
| .device = PCI_DEVICE_ID_COMMTECH_4228PCIE, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_xr17v35x_setup, |
| }, |
| /* |
| * Broadcom TruManage (NetXtreme) |
| */ |
| { |
| .vendor = PCI_VENDOR_ID_BROADCOM, |
| .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_brcm_trumanage_setup, |
| }, |
| { |
| .vendor = 0x1c29, |
| .device = 0x1104, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_fintek_setup, |
| .init = pci_fintek_init, |
| }, |
| { |
| .vendor = 0x1c29, |
| .device = 0x1108, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_fintek_setup, |
| .init = pci_fintek_init, |
| }, |
| { |
| .vendor = 0x1c29, |
| .device = 0x1112, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_fintek_setup, |
| .init = pci_fintek_init, |
| }, |
| |
| /* |
| * Default "match everything" terminator entry |
| */ |
| { |
| .vendor = PCI_ANY_ID, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| .setup = pci_default_setup, |
| } |
| }; |
| |
| static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) |
| { |
| return quirk_id == PCI_ANY_ID || quirk_id == dev_id; |
| } |
| |
| static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) |
| { |
| struct pci_serial_quirk *quirk; |
| |
| for (quirk = pci_serial_quirks; ; quirk++) |
| if (quirk_id_matches(quirk->vendor, dev->vendor) && |
| quirk_id_matches(quirk->device, dev->device) && |
| quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && |
| quirk_id_matches(quirk->subdevice, dev->subsystem_device)) |
| break; |
| return quirk; |
| } |
| |
| static inline int get_pci_irq(struct pci_dev *dev, |
| const struct pciserial_board *board) |
| { |
| if (board->flags & FL_NOIRQ) |
| return 0; |
| else |
| return dev->irq; |
| } |
| |
| /* |
| * This is the configuration table for all of the PCI serial boards |
| * which we support. It is directly indexed by the pci_board_num_t enum |
| * value, which is encoded in the pci_device_id PCI probe table's |
| * driver_data member. |
| * |
| * The makeup of these names are: |
| * pbn_bn{_bt}_n_baud{_offsetinhex} |
| * |
| * bn = PCI BAR number |
| * bt = Index using PCI BARs |
| * n = number of serial ports |
| * baud = baud rate |
| * offsetinhex = offset for each sequential port (in hex) |
| * |
| * This table is sorted by (in order): bn, bt, baud, offsetindex, n. |
| * |
| * Please note: in theory if n = 1, _bt infix should make no difference. |
| * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 |
| */ |
| enum pci_board_num_t { |
| pbn_default = 0, |
| |
| pbn_b0_1_115200, |
| pbn_b0_2_115200, |
| pbn_b0_4_115200, |
| pbn_b0_5_115200, |
| pbn_b0_8_115200, |
| |
| pbn_b0_1_921600, |
| pbn_b0_2_921600, |
| pbn_b0_4_921600, |
| |
| pbn_b0_2_1130000, |
| |
| pbn_b0_4_1152000, |
| |
| pbn_b0_2_1152000_200, |
| pbn_b0_4_1152000_200, |
| pbn_b0_8_1152000_200, |
| |
| pbn_b0_2_1843200, |
| pbn_b0_4_1843200, |
| |
| pbn_b0_2_1843200_200, |
| pbn_b0_4_1843200_200, |
| pbn_b0_8_1843200_200, |
| |
| pbn_b0_1_4000000, |
| |
| pbn_b0_bt_1_115200, |
| pbn_b0_bt_2_115200, |
| pbn_b0_bt_4_115200, |
| pbn_b0_bt_8_115200, |
| |
| pbn_b0_bt_1_460800, |
| pbn_b0_bt_2_460800, |
| pbn_b0_bt_4_460800, |
| |
| pbn_b0_bt_1_921600, |
| pbn_b0_bt_2_921600, |
| pbn_b0_bt_4_921600, |
| pbn_b0_bt_8_921600, |
| |
| pbn_b1_1_115200, |
| pbn_b1_2_115200, |
| pbn_b1_4_115200, |
| pbn_b1_8_115200, |
| pbn_b1_16_115200, |
| |
| pbn_b1_1_921600, |
| pbn_b1_2_921600, |
| pbn_b1_4_921600, |
| pbn_b1_8_921600, |
| |
| pbn_b1_2_1250000, |
| |
| pbn_b1_bt_1_115200, |
| pbn_b1_bt_2_115200, |
| pbn_b1_bt_4_115200, |
| |
| pbn_b1_bt_2_921600, |
| |
| pbn_b1_1_1382400, |
| pbn_b1_2_1382400, |
| pbn_b1_4_1382400, |
| pbn_b1_8_1382400, |
| |
| pbn_b2_1_115200, |
| pbn_b2_2_115200, |
| pbn_b2_4_115200, |
| pbn_b2_8_115200, |
| |
| pbn_b2_1_460800, |
| pbn_b2_4_460800, |
| pbn_b2_8_460800, |
| pbn_b2_16_460800, |
| |
| pbn_b2_1_921600, |
| pbn_b2_4_921600, |
| pbn_b2_8_921600, |
| |
| pbn_b2_8_1152000, |
| |
| pbn_b2_bt_1_115200, |
| pbn_b2_bt_2_115200, |
| pbn_b2_bt_4_115200, |
| |
| pbn_b2_bt_2_921600, |
| pbn_b2_bt_4_921600, |
| |
| pbn_b3_2_115200, |
| pbn_b3_4_115200, |
| pbn_b3_8_115200, |
| |
| pbn_b4_bt_2_921600, |
| pbn_b4_bt_4_921600, |
| pbn_b4_bt_8_921600, |
| |
| /* |
| * Board-specific versions. |
| */ |
| pbn_panacom, |
| pbn_panacom2, |
| pbn_panacom4, |
| pbn_plx_romulus, |
| pbn_endrun_2_4000000, |
| pbn_oxsemi, |
| pbn_oxsemi_1_4000000, |
| pbn_oxsemi_2_4000000, |
| pbn_oxsemi_4_4000000, |
| pbn_oxsemi_8_4000000, |
| pbn_intel_i960, |
| pbn_sgi_ioc3, |
| pbn_computone_4, |
| pbn_computone_6, |
| pbn_computone_8, |
| pbn_sbsxrsio, |
| pbn_exar_XR17C152, |
| pbn_exar_XR17C154, |
| pbn_exar_XR17C158, |
| pbn_exar_XR17V352, |
| pbn_exar_XR17V354, |
| pbn_exar_XR17V358, |
| pbn_exar_ibm_saturn, |
| pbn_pasemi_1682M, |
| pbn_ni8430_2, |
| pbn_ni8430_4, |
| pbn_ni8430_8, |
| pbn_ni8430_16, |
| pbn_ADDIDATA_PCIe_1_3906250, |
| pbn_ADDIDATA_PCIe_2_3906250, |
| pbn_ADDIDATA_PCIe_4_3906250, |
| pbn_ADDIDATA_PCIe_8_3906250, |
| pbn_ce4100_1_115200, |
| pbn_byt, |
| pbn_pnw, |
| pbn_tng, |
| pbn_qrk, |
| pbn_omegapci, |
| pbn_NETMOS9900_2s_115200, |
| pbn_brcm_trumanage, |
| pbn_fintek_4, |
| pbn_fintek_8, |
| pbn_fintek_12, |
| pbn_wch384_4, |
| }; |
| |
| /* |
| * uart_offset - the space between channels |
| * reg_shift - describes how the UART registers are mapped |
| * to PCI memory by the card. |
| * For example IER register on SBS, Inc. PMC-OctPro is located at |
| * offset 0x10 from the UART base, while UART_IER is defined as 1 |
| * in include/linux/serial_reg.h, |
| * see first lines of serial_in() and serial_out() in 8250.c |
| */ |
| |
| static struct pciserial_board pci_boards[] = { |
| [pbn_default] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_1_115200] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_2_115200] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_4_115200] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_5_115200] = { |
| .flags = FL_BASE0, |
| .num_ports = 5, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_8_115200] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_1_921600] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_2_921600] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_4_921600] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b0_2_1130000] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 1130000, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b0_4_1152000] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 1152000, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b0_2_1152000_200] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 1152000, |
| .uart_offset = 0x200, |
| }, |
| |
| [pbn_b0_4_1152000_200] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 1152000, |
| .uart_offset = 0x200, |
| }, |
| |
| [pbn_b0_8_1152000_200] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 1152000, |
| .uart_offset = 0x200, |
| }, |
| |
| [pbn_b0_2_1843200] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 1843200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_4_1843200] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 1843200, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b0_2_1843200_200] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 1843200, |
| .uart_offset = 0x200, |
| }, |
| [pbn_b0_4_1843200_200] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 1843200, |
| .uart_offset = 0x200, |
| }, |
| [pbn_b0_8_1843200_200] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 1843200, |
| .uart_offset = 0x200, |
| }, |
| [pbn_b0_1_4000000] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 4000000, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b0_bt_1_115200] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 1, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_bt_2_115200] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_bt_4_115200] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 4, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_bt_8_115200] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 8, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b0_bt_1_460800] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 1, |
| .base_baud = 460800, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_bt_2_460800] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 460800, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_bt_4_460800] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 4, |
| .base_baud = 460800, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b0_bt_1_921600] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 1, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_bt_2_921600] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_bt_4_921600] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b0_bt_8_921600] = { |
| .flags = FL_BASE0|FL_BASE_BARS, |
| .num_ports = 8, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b1_1_115200] = { |
| .flags = FL_BASE1, |
| .num_ports = 1, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_2_115200] = { |
| .flags = FL_BASE1, |
| .num_ports = 2, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_4_115200] = { |
| .flags = FL_BASE1, |
| .num_ports = 4, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_8_115200] = { |
| .flags = FL_BASE1, |
| .num_ports = 8, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_16_115200] = { |
| .flags = FL_BASE1, |
| .num_ports = 16, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b1_1_921600] = { |
| .flags = FL_BASE1, |
| .num_ports = 1, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_2_921600] = { |
| .flags = FL_BASE1, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_4_921600] = { |
| .flags = FL_BASE1, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_8_921600] = { |
| .flags = FL_BASE1, |
| .num_ports = 8, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_2_1250000] = { |
| .flags = FL_BASE1, |
| .num_ports = 2, |
| .base_baud = 1250000, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b1_bt_1_115200] = { |
| .flags = FL_BASE1|FL_BASE_BARS, |
| .num_ports = 1, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_bt_2_115200] = { |
| .flags = FL_BASE1|FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_bt_4_115200] = { |
| .flags = FL_BASE1|FL_BASE_BARS, |
| .num_ports = 4, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b1_bt_2_921600] = { |
| .flags = FL_BASE1|FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b1_1_1382400] = { |
| .flags = FL_BASE1, |
| .num_ports = 1, |
| .base_baud = 1382400, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_2_1382400] = { |
| .flags = FL_BASE1, |
| .num_ports = 2, |
| .base_baud = 1382400, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_4_1382400] = { |
| .flags = FL_BASE1, |
| .num_ports = 4, |
| .base_baud = 1382400, |
| .uart_offset = 8, |
| }, |
| [pbn_b1_8_1382400] = { |
| .flags = FL_BASE1, |
| .num_ports = 8, |
| .base_baud = 1382400, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b2_1_115200] = { |
| .flags = FL_BASE2, |
| .num_ports = 1, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_2_115200] = { |
| .flags = FL_BASE2, |
| .num_ports = 2, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_4_115200] = { |
| .flags = FL_BASE2, |
| .num_ports = 4, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_8_115200] = { |
| .flags = FL_BASE2, |
| .num_ports = 8, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b2_1_460800] = { |
| .flags = FL_BASE2, |
| .num_ports = 1, |
| .base_baud = 460800, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_4_460800] = { |
| .flags = FL_BASE2, |
| .num_ports = 4, |
| .base_baud = 460800, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_8_460800] = { |
| .flags = FL_BASE2, |
| .num_ports = 8, |
| .base_baud = 460800, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_16_460800] = { |
| .flags = FL_BASE2, |
| .num_ports = 16, |
| .base_baud = 460800, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b2_1_921600] = { |
| .flags = FL_BASE2, |
| .num_ports = 1, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_4_921600] = { |
| .flags = FL_BASE2, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_8_921600] = { |
| .flags = FL_BASE2, |
| .num_ports = 8, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b2_8_1152000] = { |
| .flags = FL_BASE2, |
| .num_ports = 8, |
| .base_baud = 1152000, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b2_bt_1_115200] = { |
| .flags = FL_BASE2|FL_BASE_BARS, |
| .num_ports = 1, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_bt_2_115200] = { |
| .flags = FL_BASE2|FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_bt_4_115200] = { |
| .flags = FL_BASE2|FL_BASE_BARS, |
| .num_ports = 4, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b2_bt_2_921600] = { |
| .flags = FL_BASE2|FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b2_bt_4_921600] = { |
| .flags = FL_BASE2|FL_BASE_BARS, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b3_2_115200] = { |
| .flags = FL_BASE3, |
| .num_ports = 2, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b3_4_115200] = { |
| .flags = FL_BASE3, |
| .num_ports = 4, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_b3_8_115200] = { |
| .flags = FL_BASE3, |
| .num_ports = 8, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| |
| [pbn_b4_bt_2_921600] = { |
| .flags = FL_BASE4, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b4_bt_4_921600] = { |
| .flags = FL_BASE4, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| [pbn_b4_bt_8_921600] = { |
| .flags = FL_BASE4, |
| .num_ports = 8, |
| .base_baud = 921600, |
| .uart_offset = 8, |
| }, |
| |
| /* |
| * Entries following this are board-specific. |
| */ |
| |
| /* |
| * Panacom - IOMEM |
| */ |
| [pbn_panacom] = { |
| .flags = FL_BASE2, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 0x400, |
| .reg_shift = 7, |
| }, |
| [pbn_panacom2] = { |
| .flags = FL_BASE2|FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 0x400, |
| .reg_shift = 7, |
| }, |
| [pbn_panacom4] = { |
| .flags = FL_BASE2|FL_BASE_BARS, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 0x400, |
| .reg_shift = 7, |
| }, |
| |
| /* I think this entry is broken - the first_offset looks wrong --rmk */ |
| [pbn_plx_romulus] = { |
| .flags = FL_BASE2, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 8 << 2, |
| .reg_shift = 2, |
| .first_offset = 0x03, |
| }, |
| |
| /* |
| * EndRun Technologies |
| * Uses the size of PCI Base region 0 to |
| * signal now many ports are available |
| * 2 port 952 Uart support |
| */ |
| [pbn_endrun_2_4000000] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 4000000, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| |
| /* |
| * This board uses the size of PCI Base region 0 to |
| * signal now many ports are available |
| */ |
| [pbn_oxsemi] = { |
| .flags = FL_BASE0|FL_REGION_SZ_CAP, |
| .num_ports = 32, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| }, |
| [pbn_oxsemi_1_4000000] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 4000000, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| [pbn_oxsemi_2_4000000] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 4000000, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| [pbn_oxsemi_4_4000000] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 4000000, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| [pbn_oxsemi_8_4000000] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 4000000, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| |
| |
| /* |
| * EKF addition for i960 Boards form EKF with serial port. |
| * Max 256 ports. |
| */ |
| [pbn_intel_i960] = { |
| .flags = FL_BASE0, |
| .num_ports = 32, |
| .base_baud = 921600, |
| .uart_offset = 8 << 2, |
| .reg_shift = 2, |
| .first_offset = 0x10000, |
| }, |
| [pbn_sgi_ioc3] = { |
| .flags = FL_BASE0|FL_NOIRQ, |
| .num_ports = 1, |
| .base_baud = 458333, |
| .uart_offset = 8, |
| .reg_shift = 0, |
| .first_offset = 0x20178, |
| }, |
| |
| /* |
| * Computone - uses IOMEM. |
| */ |
| [pbn_computone_4] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 0x40, |
| .reg_shift = 2, |
| .first_offset = 0x200, |
| }, |
| [pbn_computone_6] = { |
| .flags = FL_BASE0, |
| .num_ports = 6, |
| .base_baud = 921600, |
| .uart_offset = 0x40, |
| .reg_shift = 2, |
| .first_offset = 0x200, |
| }, |
| [pbn_computone_8] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 921600, |
| .uart_offset = 0x40, |
| .reg_shift = 2, |
| .first_offset = 0x200, |
| }, |
| [pbn_sbsxrsio] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 460800, |
| .uart_offset = 256, |
| .reg_shift = 4, |
| }, |
| /* |
| * Exar Corp. XR17C15[248] Dual/Quad/Octal UART |
| * Only basic 16550A support. |
| * XR17C15[24] are not tested, but they should work. |
| */ |
| [pbn_exar_XR17C152] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .uart_offset = 0x200, |
| }, |
| [pbn_exar_XR17C154] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 921600, |
| .uart_offset = 0x200, |
| }, |
| [pbn_exar_XR17C158] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 921600, |
| .uart_offset = 0x200, |
| }, |
| [pbn_exar_XR17V352] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 7812500, |
| .uart_offset = 0x400, |
| .reg_shift = 0, |
| .first_offset = 0, |
| }, |
| [pbn_exar_XR17V354] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 7812500, |
| .uart_offset = 0x400, |
| .reg_shift = 0, |
| .first_offset = 0, |
| }, |
| [pbn_exar_XR17V358] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 7812500, |
| .uart_offset = 0x400, |
| .reg_shift = 0, |
| .first_offset = 0, |
| }, |
| [pbn_exar_ibm_saturn] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 921600, |
| .uart_offset = 0x200, |
| }, |
| |
| /* |
| * PA Semi PWRficient PA6T-1682M on-chip UART |
| */ |
| [pbn_pasemi_1682M] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 8333333, |
| }, |
| /* |
| * National Instruments 843x |
| */ |
| [pbn_ni8430_16] = { |
| .flags = FL_BASE0, |
| .num_ports = 16, |
| .base_baud = 3686400, |
| .uart_offset = 0x10, |
| .first_offset = 0x800, |
| }, |
| [pbn_ni8430_8] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 3686400, |
| .uart_offset = 0x10, |
| .first_offset = 0x800, |
| }, |
| [pbn_ni8430_4] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 3686400, |
| .uart_offset = 0x10, |
| .first_offset = 0x800, |
| }, |
| [pbn_ni8430_2] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 3686400, |
| .uart_offset = 0x10, |
| .first_offset = 0x800, |
| }, |
| /* |
| * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> |
| */ |
| [pbn_ADDIDATA_PCIe_1_3906250] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 3906250, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| [pbn_ADDIDATA_PCIe_2_3906250] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 3906250, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| [pbn_ADDIDATA_PCIe_4_3906250] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 3906250, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| [pbn_ADDIDATA_PCIe_8_3906250] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 3906250, |
| .uart_offset = 0x200, |
| .first_offset = 0x1000, |
| }, |
| [pbn_ce4100_1_115200] = { |
| .flags = FL_BASE_BARS, |
| .num_ports = 2, |
| .base_baud = 921600, |
| .reg_shift = 2, |
| }, |
| /* |
| * Intel BayTrail HSUART reference clock is 44.2368 MHz at power-on, |
| * but is overridden by byt_set_termios. |
| */ |
| [pbn_byt] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 2764800, |
| .uart_offset = 0x80, |
| .reg_shift = 2, |
| }, |
| [pbn_pnw] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 115200, |
| }, |
| [pbn_tng] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 1843200, |
| }, |
| [pbn_qrk] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .base_baud = 2764800, |
| .reg_shift = 2, |
| }, |
| [pbn_omegapci] = { |
| .flags = FL_BASE0, |
| .num_ports = 8, |
| .base_baud = 115200, |
| .uart_offset = 0x200, |
| }, |
| [pbn_NETMOS9900_2s_115200] = { |
| .flags = FL_BASE0, |
| .num_ports = 2, |
| .base_baud = 115200, |
| }, |
| [pbn_brcm_trumanage] = { |
| .flags = FL_BASE0, |
| .num_ports = 1, |
| .reg_shift = 2, |
| .base_baud = 115200, |
| }, |
| [pbn_fintek_4] = { |
| .num_ports = 4, |
| .uart_offset = 8, |
| .base_baud = 115200, |
| .first_offset = 0x40, |
| }, |
| [pbn_fintek_8] = { |
| .num_ports = 8, |
| .uart_offset = 8, |
| .base_baud = 115200, |
| .first_offset = 0x40, |
| }, |
| [pbn_fintek_12] = { |
| .num_ports = 12, |
| .uart_offset = 8, |
| .base_baud = 115200, |
| .first_offset = 0x40, |
| }, |
| |
| [pbn_wch384_4] = { |
| .flags = FL_BASE0, |
| .num_ports = 4, |
| .base_baud = 115200, |
| .uart_offset = 8, |
| .first_offset = 0xC0, |
| }, |
| }; |
| |
| static const struct pci_device_id blacklist[] = { |
| /* softmodems */ |
| { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ |
| { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ |
| { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ |
| |
| /* multi-io cards handled by parport_serial */ |
| { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ |
| { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ |
| { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ |
| { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ |
| }; |
| |
| /* |
| * Given a complete unknown PCI device, try to use some heuristics to |
| * guess what the configuration might be, based on the pitiful PCI |
| * serial specs. Returns 0 on success, 1 on failure. |
| */ |
| static int |
| serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) |
| { |
| const struct pci_device_id *bldev; |
| int num_iomem, num_port, first_port = -1, i; |
| |
| /* |
| * If it is not a communications device or the programming |
| * interface is greater than 6, give up. |
| * |
| * (Should we try to make guesses for multiport serial devices |
| * later?) |
| */ |
| if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && |
| ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || |
| (dev->class & 0xff) > 6) |
| return -ENODEV; |
| |
| /* |
| * Do not access blacklisted devices that are known not to |
| * feature serial ports or are handled by other modules. |
| */ |
| for (bldev = blacklist; |
| bldev < blacklist + ARRAY_SIZE(blacklist); |
| bldev++) { |
| if (dev->vendor == bldev->vendor && |
| dev->device == bldev->device) |
| return -ENODEV; |
| } |
| |
| num_iomem = num_port = 0; |
| for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { |
| if (pci_resource_flags(dev, i) & IORESOURCE_IO) { |
| num_port++; |
| if (first_port == -1) |
| first_port = i; |
| } |
| if (pci_resource_flags(dev, i) & IORESOURCE_MEM) |
| num_iomem++; |
| } |
| |
| /* |
| * If there is 1 or 0 iomem regions, and exactly one port, |
| * use it. We guess the number of ports based on the IO |
| * region size. |
| */ |
| if (num_iomem <= 1 && num_port == 1) { |
| board->flags = first_port; |
| board->num_ports = pci_resource_len(dev, first_port) / 8; |
| return 0; |
| } |
| |
| /* |
| * Now guess if we've got a board which indexes by BARs. |
| * Each IO BAR should be 8 bytes, and they should follow |
| * consecutively. |
| */ |
| first_port = -1; |
| num_port = 0; |
| for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { |
| if (pci_resource_flags(dev, i) & IORESOURCE_IO && |
| pci_resource_len(dev, i) == 8 && |
| (first_port == -1 || (first_port + num_port) == i)) { |
| num_port++; |
| if (first_port == -1) |
| first_port = i; |
| } |
| } |
| |
| if (num_port > 1) { |
| board->flags = first_port | FL_BASE_BARS; |
| board->num_ports = num_port; |
| return 0; |
| } |
| |
| return -ENODEV; |
| } |
| |
| static inline int |
| serial_pci_matches(const struct pciserial_board *board, |
| const struct pciserial_board *guessed) |
| { |
| return |
| board->num_ports == guessed->num_ports && |
| board->base_baud == guessed->base_baud && |
| board->uart_offset == guessed->uart_offset && |
| board->reg_shift == guessed->reg_shift && |
| board->first_offset == guessed->first_offset; |
| } |
| |
| struct serial_private * |
| pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) |
| { |
| struct uart_8250_port uart; |
| struct serial_private *priv; |
| struct pci_serial_quirk *quirk; |
| int rc, nr_ports, i; |
| |
| nr_ports = board->num_ports; |
| |
| /* |
| * Find an init and setup quirks. |
| */ |
| quirk = find_quirk(dev); |
| |
| /* |
| * Run the new-style initialization function. |
| * The initialization function returns: |
| * <0 - error |
| * 0 - use board->num_ports |
| * >0 - number of ports |
| */ |
| if (quirk->init) { |
| rc = quirk->init(dev); |
| if (rc < 0) { |
| priv = ERR_PTR(rc); |
| goto err_out; |
| } |
| if (rc) |
| nr_ports = rc; |
| } |
| |
| priv = kzalloc(sizeof(struct serial_private) + |
| sizeof(unsigned int) * nr_ports, |
| GFP_KERNEL); |
| if (!priv) { |
| priv = ERR_PTR(-ENOMEM); |
| goto err_deinit; |
| } |
| |
| priv->dev = dev; |
| priv->quirk = quirk; |
| |
| memset(&uart, 0, sizeof(uart)); |
| uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; |
| uart.port.uartclk = board->base_baud * 16; |
| uart.port.irq = get_pci_irq(dev, board); |
| uart.port.dev = &dev->dev; |
| |
| for (i = 0; i < nr_ports; i++) { |
| if (quirk->setup(priv, board, &uart, i)) |
| break; |
| |
| dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", |
| uart.port.iobase, uart.port.irq, uart.port.iotype); |
| |
| priv->line[i] = serial8250_register_8250_port(&uart); |
| if (priv->line[i] < 0) { |
| dev_err(&dev->dev, |
| "Couldn't register serial port %lx, irq %d, type %d, error %d\n", |
| uart.port.iobase, uart.port.irq, |
| uart.port.iotype, priv->line[i]); |
| break; |
| } |
| } |
| priv->nr = i; |
| return priv; |
| |
| err_deinit: |
| if (quirk->exit) |
| quirk->exit(dev); |
| err_out: |
| return priv; |
| } |
| EXPORT_SYMBOL_GPL(pciserial_init_ports); |
| |
| void pciserial_remove_ports(struct serial_private *priv) |
| { |
| struct pci_serial_quirk *quirk; |
| int i; |
| |
| for (i = 0; i < priv->nr; i++) |
| serial8250_unregister_port(priv->line[i]); |
| |
| for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { |
| if (priv->remapped_bar[i]) |
| iounmap(priv->remapped_bar[i]); |
| priv->remapped_bar[i] = NULL; |
| } |
| |
| /* |
| * Find the exit quirks. |
| */ |
| quirk = find_quirk(priv->dev); |
| if (quirk->exit) |
| quirk->exit(priv->dev); |
| |
| kfree(priv); |
| } |
| EXPORT_SYMBOL_GPL(pciserial_remove_ports); |
| |
| void pciserial_suspend_ports(struct serial_private *priv) |
| { |
| int i; |
| |
| for (i = 0; i < priv->nr; i++) |
| if (priv->line[i] >= 0) |
| serial8250_suspend_port(priv->line[i]); |
| |
| /* |
| * Ensure that every init quirk is properly torn down |
| */ |
| if (priv->quirk->exit) |
| priv->quirk->exit(priv->dev); |
| } |
| EXPORT_SYMBOL_GPL(pciserial_suspend_ports); |
| |
| void pciserial_resume_ports(struct serial_private *priv) |
| { |
| int i; |
| |
| /* |
| * Ensure that the board is correctly configured. |
| */ |
| if (priv->quirk->init) |
| priv->quirk->init(priv->dev); |
| |
| for (i = 0; i < priv->nr; i++) |
| if (priv->line[i] >= 0) |
| serial8250_resume_port(priv->line[i]); |
| } |
| EXPORT_SYMBOL_GPL(pciserial_resume_ports); |
| |
| /* |
| * Probe one serial board. Unfortunately, there is no rhyme nor reason |
| * to the arrangement of serial ports on a PCI card. |
| */ |
| static int |
| pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) |
| { |
| struct pci_serial_quirk *quirk; |
| struct serial_private *priv; |
| const struct pciserial_board *board; |
| struct pciserial_board tmp; |
| int rc; |
| |
| quirk = find_quirk(dev); |
| if (quirk->probe) { |
| rc = quirk->probe(dev); |
| if (rc) |
| return rc; |
| } |
| |
| if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { |
| dev_err(&dev->dev, "invalid driver_data: %ld\n", |
| ent->driver_data); |
| return -EINVAL; |
| } |
| |
| board = &pci_boards[ent->driver_data]; |
| |
| rc = pci_enable_device(dev); |
| pci_save_state(dev); |
| if (rc) |
| return rc; |
| |
| if (ent->driver_data == pbn_default) { |
| /* |
| * Use a copy of the pci_board entry for this; |
| * avoid changing entries in the table. |
| */ |
| memcpy(&tmp, board, sizeof(struct pciserial_board)); |
| board = &tmp; |
| |
| /* |
| * We matched one of our class entries. Try to |
| * determine the parameters of this board. |
| */ |
| rc = serial_pci_guess_board(dev, &tmp); |
| if (rc) |
| goto disable; |
| } else { |
| /* |
| * We matched an explicit entry. If we are able to |
| * detect this boards settings with our heuristic, |
| * then we no longer need this entry. |
| */ |
| memcpy(&tmp, &pci_boards[pbn_default], |
| sizeof(struct pciserial_board)); |
| rc = serial_pci_guess_board(dev, &tmp); |
| if (rc == 0 && serial_pci_matches(board, &tmp)) |
| moan_device("Redundant entry in serial pci_table.", |
| dev); |
| } |
| |
| priv = pciserial_init_ports(dev, board); |
| if (!IS_ERR(priv)) { |
| pci_set_drvdata(dev, priv); |
| return 0; |
| } |
| |
| rc = PTR_ERR(priv); |
| |
| disable: |
| pci_disable_device(dev); |
| return rc; |
| } |
| |
| static void pciserial_remove_one(struct pci_dev *dev) |
| { |
| struct serial_private *priv = pci_get_drvdata(dev); |
| |
| pciserial_remove_ports(priv); |
| |
| pci_disable_device(dev); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int pciserial_suspend_one(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct serial_private *priv = pci_get_drvdata(pdev); |
| |
| if (priv) |
| pciserial_suspend_ports(priv); |
| |
| return 0; |
| } |
| |
| static int pciserial_resume_one(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct serial_private *priv = pci_get_drvdata(pdev); |
| int err; |
| |
| if (priv) { |
| /* |
| * The device may have been disabled. Re-enable it. |
| */ |
| err = pci_enable_device(pdev); |
| /* FIXME: We cannot simply error out here */ |
| if (err) |
| dev_err(dev, "Unable to re-enable ports, trying to continue.\n"); |
| pciserial_resume_ports(priv); |
| } |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, |
| pciserial_resume_one); |
| |
| static struct pci_device_id serial_pci_tbl[] = { |
| /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ |
| { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, |
| PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, |
| pbn_b2_8_921600 }, |
| /* Advantech also use 0x3618 and 0xf618 */ |
| { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618, |
| PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618, |
| PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, |
| pbn_b1_8_1382400 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, |
| pbn_b1_4_1382400 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, |
| pbn_b1_2_1382400 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, |
| pbn_b1_8_1382400 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, |
| pbn_b1_4_1382400 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, |
| pbn_b1_2_1382400 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, |
| pbn_b1_8_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, |
| pbn_b1_8_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, |
| pbn_b1_4_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, |
| pbn_b1_4_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, |
| pbn_b1_2_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, |
| pbn_b1_8_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, |
| pbn_b1_8_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, |
| pbn_b1_4_921600 }, |
| { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, |
| pbn_b1_2_1250000 }, |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, |
| pbn_b0_2_1843200 }, |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, |
| pbn_b0_4_1843200 }, |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, |
| PCI_VENDOR_ID_AFAVLAB, |
| PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, |
| pbn_b0_4_1152000 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0, |
| pbn_b0_2_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0, |
| pbn_b0_4_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0, |
| pbn_b0_8_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0, |
| pbn_b0_2_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0, |
| pbn_b0_4_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0, |
| pbn_b0_8_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0, |
| pbn_b0_2_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0, |
| pbn_b0_4_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0, |
| pbn_b0_8_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0, |
| pbn_b0_2_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0, |
| pbn_b0_4_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, |
| PCI_SUBVENDOR_ID_CONNECT_TECH, |
| PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, |
| pbn_b0_8_1843200_200 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, |
| PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, |
| 0, 0, pbn_exar_ibm_saturn }, |
| |
| { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_1_115200 }, |
| { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_2_115200 }, |
| { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_4_115200 }, |
| { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_2_115200 }, |
| { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_4_115200 }, |
| { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_8_115200 }, |
| { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_8_460800 }, |
| { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_8_115200 }, |
| |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_2_115200 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_2_921600 }, |
| /* |
| * VScom SPCOM800, from sl@s.pl |
| */ |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_8_921600 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_4_921600 }, |
| /* Unknown card - subdevice 0x1584 */ |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_VENDOR_ID_PLX, |
| PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, |
| pbn_b2_4_115200 }, |
| /* Unknown card - subdevice 0x1588 */ |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_VENDOR_ID_PLX, |
| PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0, |
| pbn_b2_8_115200 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_SUBVENDOR_ID_KEYSPAN, |
| PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, |
| pbn_panacom }, |
| { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_panacom4 }, |
| { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_panacom2 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, |
| PCI_VENDOR_ID_ESDGMBH, |
| PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, |
| pbn_b2_4_115200 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_SUBVENDOR_ID_CHASE_PCIFAST, |
| PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, |
| pbn_b2_4_460800 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_SUBVENDOR_ID_CHASE_PCIFAST, |
| PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, |
| pbn_b2_8_460800 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_SUBVENDOR_ID_CHASE_PCIFAST, |
| PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, |
| pbn_b2_16_460800 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_SUBVENDOR_ID_CHASE_PCIFAST, |
| PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, |
| pbn_b2_16_460800 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_SUBVENDOR_ID_CHASE_PCIRAS, |
| PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, |
| pbn_b2_4_460800 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_SUBVENDOR_ID_CHASE_PCIRAS, |
| PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, |
| pbn_b2_8_460800 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| PCI_SUBVENDOR_ID_EXSYS, |
| PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, |
| pbn_b2_4_115200 }, |
| /* |
| * Megawolf Romulus PCI Serial Card, from Mike Hudson |
| * (Exoray@isys.ca) |
| */ |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, |
| 0x10b5, 0x106a, 0, 0, |
| pbn_plx_romulus }, |
| /* |
| * EndRun Technologies. PCI express device range. |
| * EndRun PTP/1588 has 2 Native UARTs. |
| */ |
| { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_endrun_2_4000000 }, |
| /* |
| * Quatech cards. These actually have configurable clocks but for |
| * now we just use the default. |
| * |
| * 100 series are RS232, 200 series RS422, |
| */ |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_4_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_2_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_2_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_2_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_2_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_4_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_8_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_8_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_4_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_2_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_4_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_2_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_4_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_2_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_1_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_4_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_2_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_1_115200 }, |
| { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_8_115200 }, |
| |
| { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, |
| PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, |
| 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, |
| PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, |
| 0, 0, |
| pbn_b0_4_1152000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0x9505, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_921600 }, |
| |
| /* |
| * The below card is a little controversial since it is the |
| * subject of a PCI vendor/device ID clash. (See |
| * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). |
| * For now just used the hex ID 0x950a. |
| */ |
| { PCI_VENDOR_ID_OXSEMI, 0x950a, |
| PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00, |
| 0, 0, pbn_b0_2_115200 }, |
| { PCI_VENDOR_ID_OXSEMI, 0x950a, |
| PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30, |
| 0, 0, pbn_b0_2_115200 }, |
| { PCI_VENDOR_ID_OXSEMI, 0x950a, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_2_1130000 }, |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, |
| PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, |
| pbn_b0_1_921600 }, |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_115200 }, |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_921600 }, |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, |
| PCI_ANY_ID , PCI_ANY_ID, 0, 0, |
| pbn_b2_8_1152000 }, |
| |
| /* |
| * Oxford Semiconductor Inc. Tornado PCI express device range. |
| */ |
| { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_2_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_2_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_4_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_4_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_8_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_8_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| /* |
| * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado |
| */ |
| { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ |
| PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ |
| PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, |
| pbn_oxsemi_2_4000000 }, |
| { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ |
| PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, |
| pbn_oxsemi_4_4000000 }, |
| { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ |
| PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, |
| pbn_oxsemi_8_4000000 }, |
| |
| /* |
| * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado |
| */ |
| { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, |
| PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_2_4000000 }, |
| |
| /* |
| * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, |
| * from skokodyn@yahoo.com |
| */ |
| { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, |
| PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, |
| pbn_sbsxrsio }, |
| { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, |
| PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, |
| pbn_sbsxrsio }, |
| { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, |
| PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, |
| pbn_sbsxrsio }, |
| { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, |
| PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, |
| pbn_sbsxrsio }, |
| |
| /* |
| * Digitan DS560-558, from jimd@esoft.com |
| */ |
| { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_1_115200 }, |
| |
| /* |
| * Titan Electronic cards |
| * The 400L and 800L have a custom setup quirk. |
| */ |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_2_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_1_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_2_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_8_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b4_bt_2_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b4_bt_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b4_bt_8_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_1_4000000 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_2_4000000 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_4_4000000 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_8_4000000 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_2_4000000 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi_2_4000000 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_4_921600 }, |
| |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_1_460800 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_1_460800 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_1_460800 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_2_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_2_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_2_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_4_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_4_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_4_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_4_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_4_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_4_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_8_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_8_921600 }, |
| { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_8_921600 }, |
| |
| /* |
| * Computone devices submitted by Doug McNash dmcnash@computone.com |
| */ |
| { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, |
| PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, |
| 0, 0, pbn_computone_4 }, |
| { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, |
| PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, |
| 0, 0, pbn_computone_8 }, |
| { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, |
| PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, |
| 0, 0, pbn_computone_6 }, |
| |
| { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_oxsemi }, |
| { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, |
| PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_1_921600 }, |
| |
| /* |
| * SUNIX (TIMEDIA) |
| */ |
| { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, |
| PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00, |
| pbn_b0_bt_1_921600 }, |
| |
| { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, |
| PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, |
| pbn_b0_bt_1_921600 }, |
| |
| /* |
| * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org> |
| */ |
| { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_8_115200 }, |
| { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_8_115200 }, |
| |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_115200 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_115200 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_115200 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_115200 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_115200 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_4_460800 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_4_460800 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_460800 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_460800 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_2_460800 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_1_115200 }, |
| { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_bt_1_460800 }, |
| |
| /* |
| * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). |
| * Cards are identified by their subsystem vendor IDs, which |
| * (in hex) match the model number. |
| * |
| * Note that JC140x are RS422/485 cards which require ox950 |
| * ACR = 0x10, and as such are not currently fully supported. |
| */ |
| { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, |
| 0x1204, 0x0004, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, |
| 0x1208, 0x0004, 0, 0, |
| pbn_b0_4_921600 }, |
| /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, |
| 0x1402, 0x0002, 0, 0, |
| pbn_b0_2_921600 }, */ |
| /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, |
| 0x1404, 0x0004, 0, 0, |
| pbn_b0_4_921600 }, */ |
| { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, |
| 0x1208, 0x0004, 0, 0, |
| pbn_b0_4_921600 }, |
| |
| { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, |
| 0x1204, 0x0004, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, |
| 0x1208, 0x0004, 0, 0, |
| pbn_b0_4_921600 }, |
| { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, |
| 0x1208, 0x0004, 0, 0, |
| pbn_b0_4_921600 }, |
| /* |
| * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com |
| */ |
| { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_1_1382400 }, |
| |
| /* |
| * Dell Remote Access Card III - Tim_T_Murphy@Dell.com |
| */ |
| { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_1_1382400 }, |
| |
| /* |
| * RAStel 2 port modem, gerg@moreton.com.au |
| */ |
| { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_bt_2_115200 }, |
| |
| /* |
| * EKF addition for i960 Boards form EKF with serial port |
| */ |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, |
| 0xE4BF, PCI_ANY_ID, 0, 0, |
| pbn_intel_i960 }, |
| |
| /* |
| * Xircom Cardbus/Ethernet combos |
| */ |
| { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_115200 }, |
| /* |
| * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) |
| */ |
| { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_115200 }, |
| |
| /* |
| * Untested PCI modems, sent in from various folks... |
| */ |
| |
| /* |
| * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> |
| */ |
| { PCI_VENDOR_ID_ROCKWELL, 0x1004, |
| 0x1048, 0x1500, 0, 0, |
| pbn_b1_1_115200 }, |
| |
| { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, |
| 0xFF00, 0, 0, 0, |
| pbn_sgi_ioc3 }, |
| |
| /* |
| * HP Diva card |
| */ |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, |
| PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, |
| pbn_b1_1_115200 }, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_5_115200 }, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b2_1_115200 }, |
| |
| { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b3_2_115200 }, |
| { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b3_4_115200 }, |
| { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b3_8_115200 }, |
| |
| /* |
| * Exar Corp. XR17C15[248] Dual/Quad/Octal UART |
| */ |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17C152 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17C154 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17C158 }, |
| /* |
| * Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs |
| */ |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17V352 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V354, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17V354 }, |
| { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V358, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17V358 }, |
| |
| /* |
| * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) |
| */ |
| { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b0_1_115200 }, |
| /* |
| * ITE |
| */ |
| { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, |
| pbn_b1_bt_1_115200 }, |
| |
| /* |
| * IntaShield IS-200 |
| */ |
| { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ |
| pbn_b2_2_115200 }, |
| /* |
| * IntaShield IS-400 |
| */ |
| { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ |
| pbn_b2_4_115200 }, |
| /* |
| * Perle PCI-RAS cards |
| */ |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, |
| PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, |
| 0, 0, pbn_b2_4_921600 }, |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, |
| PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, |
| 0, 0, pbn_b2_8_921600 }, |
| |
| /* |
| * Mainpine series cards: Fairly standard layout but fools |
| * parts of the autodetect in some cases and uses otherwise |
| * unmatched communications subclasses in the PCI Express case |
| */ |
| |
| { /* RockForceDUO */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0200, |
| 0, 0, pbn_b0_2_115200 }, |
| { /* RockForceQUATRO */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0300, |
| 0, 0, pbn_b0_4_115200 }, |
| { /* RockForceDUO+ */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0400, |
| 0, 0, pbn_b0_2_115200 }, |
| { /* RockForceQUATRO+ */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0500, |
| 0, 0, pbn_b0_4_115200 }, |
| { /* RockForce+ */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0600, |
| 0, 0, pbn_b0_2_115200 }, |
| { /* RockForce+ */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0700, |
| 0, 0, pbn_b0_4_115200 }, |
| { /* RockForceOCTO+ */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0800, |
| 0, 0, pbn_b0_8_115200 }, |
| { /* RockForceDUO+ */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0C00, |
| 0, 0, pbn_b0_2_115200 }, |
| { /* RockForceQUARTRO+ */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x0D00, |
| 0, 0, pbn_b0_4_115200 }, |
| { /* RockForceOCTO+ */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x1D00, |
| 0, 0, pbn_b0_8_115200 }, |
| { /* RockForceD1 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x2000, |
| 0, 0, pbn_b0_1_115200 }, |
| { /* RockForceF1 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x2100, |
| 0, 0, pbn_b0_1_115200 }, |
| { /* RockForceD2 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x2200, |
| 0, 0, pbn_b0_2_115200 }, |
| { /* RockForceF2 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x2300, |
| 0, 0, pbn_b0_2_115200 }, |
| { /* RockForceD4 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x2400, |
| 0, 0, pbn_b0_4_115200 }, |
| { /* RockForceF4 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x2500, |
| 0, 0, pbn_b0_4_115200 }, |
| { /* RockForceD8 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x2600, |
| 0, 0, pbn_b0_8_115200 }, |
| { /* RockForceF8 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x2700, |
| 0, 0, pbn_b0_8_115200 }, |
| { /* IQ Express D1 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x3000, |
| 0, 0, pbn_b0_1_115200 }, |
| { /* IQ Express F1 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x3100, |
| 0, 0, pbn_b0_1_115200 }, |
| { /* IQ Express D2 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x3200, |
| 0, 0, pbn_b0_2_115200 }, |
| { /* IQ Express F2 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x3300, |
| 0, 0, pbn_b0_2_115200 }, |
| { /* IQ Express D4 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x3400, |
| 0, 0, pbn_b0_4_115200 }, |
| { /* IQ Express F4 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x3500, |
| 0, 0, pbn_b0_4_115200 }, |
| { /* IQ Express D8 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x3C00, |
| 0, 0, pbn_b0_8_115200 }, |
| { /* IQ Express F8 */ |
| PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, |
| PCI_VENDOR_ID_MAINPINE, 0x3D00, |
| 0, 0, pbn_b0_8_115200 }, |
| |
| |
| /* |
| * PA Semi PA6T-1682M on-chip UART |
| */ |
| { PCI_VENDOR_ID_PASEMI, 0xa004, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_pasemi_1682M }, |
| |
| /* |
| * National Instruments |
| */ |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_16_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_8_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_4_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_2_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_4_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_2_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_16_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_8_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_4_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_2_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_4_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_b1_bt_2_115200 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_2 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_2 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_4 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_4 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_8 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_8 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_16 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_16 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_2 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_2 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_4 }, |
| { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ni8430_4 }, |
| |
| /* |
| * ADDI-DATA GmbH communication cards <info@addi-data.com> |
| */ |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7500, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_4_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7420, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_2_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7300, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_1_115200 }, |
| |
| { PCI_VENDOR_ID_AMCC, |
| PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b1_8_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7500_2, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_4_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7420_2, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_2_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7300_2, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_1_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7500_3, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_4_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7420_3, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_2_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7300_3, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_1_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCI7800_3, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_b0_8_115200 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCIe7500, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_ADDIDATA_PCIe_4_3906250 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCIe7420, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_ADDIDATA_PCIe_2_3906250 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCIe7300, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_ADDIDATA_PCIe_1_3906250 }, |
| |
| { PCI_VENDOR_ID_ADDIDATA, |
| PCI_DEVICE_ID_ADDIDATA_APCIe7800, |
| PCI_ANY_ID, |
| PCI_ANY_ID, |
| 0, |
| 0, |
| pbn_ADDIDATA_PCIe_8_3906250 }, |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, |
| PCI_VENDOR_ID_IBM, 0x0299, |
| 0, 0, pbn_b0_bt_2_115200 }, |
| |
| /* |
| * other NetMos 9835 devices are most likely handled by the |
| * parport_serial driver, check drivers/parport/parport_serial.c |
| * before adding them here. |
| */ |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, |
| 0xA000, 0x1000, |
| 0, 0, pbn_b0_1_115200 }, |
| |
| /* the 9901 is a rebranded 9912 */ |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, |
| 0xA000, 0x1000, |
| 0, 0, pbn_b0_1_115200 }, |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, |
| 0xA000, 0x1000, |
| 0, 0, pbn_b0_1_115200 }, |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, |
| 0xA000, 0x1000, |
| 0, 0, pbn_b0_1_115200 }, |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, |
| 0xA000, 0x1000, |
| 0, 0, pbn_b0_1_115200 }, |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, |
| 0xA000, 0x3002, |
| 0, 0, pbn_NETMOS9900_2s_115200 }, |
| |
| /* |
| * Best Connectivity and Rosewill PCI Multi I/O cards |
| */ |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, |
| 0xA000, 0x1000, |
| 0, 0, pbn_b0_1_115200 }, |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, |
| 0xA000, 0x3002, |
| 0, 0, pbn_b0_bt_2_115200 }, |
| |
| { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, |
| 0xA000, 0x3004, |
| 0, 0, pbn_b0_bt_4_115200 }, |
| /* Intel CE4100 */ |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_ce4100_1_115200 }, |
| /* Intel BayTrail */ |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART1, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, |
| pbn_byt }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART2, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, |
| pbn_byt }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART1, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, |
| pbn_byt }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART2, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, |
| pbn_byt }, |
| |
| /* |
| * Intel Penwell |
| */ |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART1, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_pnw}, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART2, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_pnw}, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART3, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_pnw}, |
| |
| /* |
| * Intel Tangier |
| */ |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TNG_UART, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_tng}, |
| |
| /* |
| * Intel Quark x1000 |
| */ |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_qrk }, |
| /* |
| * Cronyx Omega PCI |
| */ |
| { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_omegapci }, |
| |
| /* |
| * Broadcom TruManage |
| */ |
| { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| pbn_brcm_trumanage }, |
| |
| /* |
| * AgeStar as-prs2-009 |
| */ |
| { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, pbn_b0_bt_2_115200 }, |
| |
| /* |
| * WCH CH353 series devices: The 2S1P is handled by parport_serial |
| * so not listed here. |
| */ |
| { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, pbn_b0_bt_4_115200 }, |
| |
| { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, pbn_b0_bt_2_115200 }, |
| |
| { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, 0, pbn_wch384_4 }, |
| |
| /* |
| * Commtech, Inc. Fastcom adapters |
| */ |
| { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCI335, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_b0_2_1152000_200 }, |
| { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCI335, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_b0_4_1152000_200 }, |
| { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2324PCI335, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_b0_4_1152000_200 }, |
| { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2328PCI335, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_b0_8_1152000_200 }, |
| { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCIE, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17V352 }, |
| { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCIE, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17V354 }, |
| { PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4228PCIE, |
| PCI_ANY_ID, PCI_ANY_ID, |
| 0, |
| 0, pbn_exar_XR17V358 }, |
| |
| /* Fintek PCI serial cards */ |
| { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, |
| { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 }, |
| { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 }, |
| |
| /* |
| * These entries match devices with class COMMUNICATION_SERIAL, |
| * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL |
| */ |
| { PCI_ANY_ID, PCI_ANY_ID, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_SERIAL << 8, |
| 0xffff00, pbn_default }, |
| { PCI_ANY_ID, PCI_ANY_ID, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_MODEM << 8, |
| 0xffff00, pbn_default }, |
| { PCI_ANY_ID, PCI_ANY_ID, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, |
| 0xffff00, pbn_default }, |
| { 0, } |
| }; |
| |
| static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, |
| pci_channel_state_t state) |
| { |
| struct serial_private *priv = pci_get_drvdata(dev); |
| |
| if (state == pci_channel_io_perm_failure) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| if (priv) |
| pciserial_suspend_ports(priv); |
| |
| pci_disable_device(dev); |
| |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) |
| { |
| int rc; |
| |
| rc = pci_enable_device(dev); |
| |
| if (rc) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| pci_restore_state(dev); |
| pci_save_state(dev); |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static void serial8250_io_resume(struct pci_dev *dev) |
| { |
| struct serial_private *priv = pci_get_drvdata(dev); |
| |
| if (priv) |
| pciserial_resume_ports(priv); |
| } |
| |
| static const struct pci_error_handlers serial8250_err_handler = { |
| .error_detected = serial8250_io_error_detected, |
| .slot_reset = serial8250_io_slot_reset, |
| .resume = serial8250_io_resume, |
| }; |
| |
| static struct pci_driver serial_pci_driver = { |
| .name = "serial", |
| .probe = pciserial_init_one, |
| .remove = pciserial_remove_one, |
| .driver = { |
| .pm = &pciserial_pm_ops, |
| }, |
| .id_table = serial_pci_tbl, |
| .err_handler = &serial8250_err_handler, |
| }; |
| |
| module_pci_driver(serial_pci_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); |
| MODULE_DEVICE_TABLE(pci, serial_pci_tbl); |