regulator: max77686: Implement .set_ramp_delay() callback
This patch implements the .set_ramp_delay callback to set the ramp_delay on
hardware for BUCK2/3/4 if ramp_delay is set in regulator constraints.
This patch also do some cleaning work for unrequired members of
struct max77686_data.
Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index 877d4bf..23f956a 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -65,11 +65,34 @@
};
struct max77686_data {
- struct device *dev;
- struct max77686_dev *iodev;
struct regulator_dev **rdev;
};
+static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+ unsigned int ramp_value = RAMP_RATE_NO_CTRL;
+
+ switch (ramp_delay) {
+ case 1 ... 13750:
+ ramp_value = RAMP_RATE_13P75MV;
+ break;
+ case 13751 ... 27500:
+ ramp_value = RAMP_RATE_27P5MV;
+ break;
+ case 27501 ... 55000:
+ ramp_value = RAMP_RATE_55MV;
+ break;
+ case 55001 ... 100000:
+ break;
+ default:
+ pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
+ rdev->desc->name, ramp_delay);
+ }
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ MAX77686_RAMP_RATE_MASK, ramp_value << 6);
+}
+
static struct regulator_ops max77686_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -90,6 +113,7 @@
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77686_set_ramp_delay,
};
#define regulator_desc_ldo(num) { \
@@ -238,20 +262,17 @@
return -ENOMEM;
rdev = max77686->rdev;
- max77686->dev = &pdev->dev;
- max77686->iodev = iodev;
+ config.dev = &pdev->dev;
+ config.regmap = iodev->regmap;
platform_set_drvdata(pdev, max77686);
for (i = 0; i < MAX77686_REGULATORS; i++) {
- config.dev = max77686->dev;
- config.regmap = iodev->regmap;
- config.driver_data = max77686;
config.init_data = pdata->regulators[i].initdata;
rdev[i] = regulator_register(®ulators[i], &config);
if (IS_ERR(rdev[i])) {
ret = PTR_ERR(rdev[i]);
- dev_err(max77686->dev,
+ dev_err(&pdev->dev,
"regulator init failed for %d\n", i);
rdev[i] = NULL;
goto err;