| /* |
| * File: pci-acpi.c |
| * Purpose: Provide PCI support in ACPI |
| * |
| * Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com> |
| * Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com> |
| * Copyright (C) 2004 Intel Corp. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/irqdomain.h> |
| #include <linux/pci.h> |
| #include <linux/msi.h> |
| #include <linux/pci_hotplug.h> |
| #include <linux/module.h> |
| #include <linux/pci-aspm.h> |
| #include <linux/pci-acpi.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pm_qos.h> |
| #include "pci.h" |
| |
| /* |
| * The GUID is defined in the PCI Firmware Specification available here: |
| * https://www.pcisig.com/members/downloads/pcifw_r3_1_13Dec10.pdf |
| */ |
| const guid_t pci_acpi_dsm_guid = |
| GUID_INIT(0xe5c937d0, 0x3553, 0x4d7a, |
| 0x91, 0x17, 0xea, 0x4d, 0x19, 0xc3, 0x43, 0x4d); |
| |
| #if defined(CONFIG_PCI_QUIRKS) && defined(CONFIG_ARM64) |
| static int acpi_get_rc_addr(struct acpi_device *adev, struct resource *res) |
| { |
| struct device *dev = &adev->dev; |
| struct resource_entry *entry; |
| struct list_head list; |
| unsigned long flags; |
| int ret; |
| |
| INIT_LIST_HEAD(&list); |
| flags = IORESOURCE_MEM; |
| ret = acpi_dev_get_resources(adev, &list, |
| acpi_dev_filter_resource_type_cb, |
| (void *) flags); |
| if (ret < 0) { |
| dev_err(dev, "failed to parse _CRS method, error code %d\n", |
| ret); |
| return ret; |
| } |
| |
| if (ret == 0) { |
| dev_err(dev, "no IO and memory resources present in _CRS\n"); |
| return -EINVAL; |
| } |
| |
| entry = list_first_entry(&list, struct resource_entry, node); |
| *res = *entry->res; |
| acpi_dev_free_resource_list(&list); |
| return 0; |
| } |
| |
| static acpi_status acpi_match_rc(acpi_handle handle, u32 lvl, void *context, |
| void **retval) |
| { |
| u16 *segment = context; |
| unsigned long long uid; |
| acpi_status status; |
| |
| status = acpi_evaluate_integer(handle, "_UID", NULL, &uid); |
| if (ACPI_FAILURE(status) || uid != *segment) |
| return AE_CTRL_DEPTH; |
| |
| *(acpi_handle *)retval = handle; |
| return AE_CTRL_TERMINATE; |
| } |
| |
| int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment, |
| struct resource *res) |
| { |
| struct acpi_device *adev; |
| acpi_status status; |
| acpi_handle handle; |
| int ret; |
| |
| status = acpi_get_devices(hid, acpi_match_rc, &segment, &handle); |
| if (ACPI_FAILURE(status)) { |
| dev_err(dev, "can't find _HID %s device to locate resources\n", |
| hid); |
| return -ENODEV; |
| } |
| |
| ret = acpi_bus_get_device(handle, &adev); |
| if (ret) |
| return ret; |
| |
| ret = acpi_get_rc_addr(adev, res); |
| if (ret) { |
| dev_err(dev, "can't get resource from %s\n", |
| dev_name(&adev->dev)); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle) |
| { |
| acpi_status status = AE_NOT_EXIST; |
| unsigned long long mcfg_addr; |
| |
| if (handle) |
| status = acpi_evaluate_integer(handle, METHOD_NAME__CBA, |
| NULL, &mcfg_addr); |
| if (ACPI_FAILURE(status)) |
| return 0; |
| |
| return (phys_addr_t)mcfg_addr; |
| } |
| |
| static acpi_status decode_type0_hpx_record(union acpi_object *record, |
| struct hotplug_params *hpx) |
| { |
| int i; |
| union acpi_object *fields = record->package.elements; |
| u32 revision = fields[1].integer.value; |
| |
| switch (revision) { |
| case 1: |
| if (record->package.count != 6) |
| return AE_ERROR; |
| for (i = 2; i < 6; i++) |
| if (fields[i].type != ACPI_TYPE_INTEGER) |
| return AE_ERROR; |
| hpx->t0 = &hpx->type0_data; |
| hpx->t0->revision = revision; |
| hpx->t0->cache_line_size = fields[2].integer.value; |
| hpx->t0->latency_timer = fields[3].integer.value; |
| hpx->t0->enable_serr = fields[4].integer.value; |
| hpx->t0->enable_perr = fields[5].integer.value; |
| break; |
| default: |
| printk(KERN_WARNING |
| "%s: Type 0 Revision %d record not supported\n", |
| __func__, revision); |
| return AE_ERROR; |
| } |
| return AE_OK; |
| } |
| |
| static acpi_status decode_type1_hpx_record(union acpi_object *record, |
| struct hotplug_params *hpx) |
| { |
| int i; |
| union acpi_object *fields = record->package.elements; |
| u32 revision = fields[1].integer.value; |
| |
| switch (revision) { |
| case 1: |
| if (record->package.count != 5) |
| return AE_ERROR; |
| for (i = 2; i < 5; i++) |
| if (fields[i].type != ACPI_TYPE_INTEGER) |
| return AE_ERROR; |
| hpx->t1 = &hpx->type1_data; |
| hpx->t1->revision = revision; |
| hpx->t1->max_mem_read = fields[2].integer.value; |
| hpx->t1->avg_max_split = fields[3].integer.value; |
| hpx->t1->tot_max_split = fields[4].integer.value; |
| break; |
| default: |
| printk(KERN_WARNING |
| "%s: Type 1 Revision %d record not supported\n", |
| __func__, revision); |
| return AE_ERROR; |
| } |
| return AE_OK; |
| } |
| |
| static acpi_status decode_type2_hpx_record(union acpi_object *record, |
| struct hotplug_params *hpx) |
| { |
| int i; |
| union acpi_object *fields = record->package.elements; |
| u32 revision = fields[1].integer.value; |
| |
| switch (revision) { |
| case 1: |
| if (record->package.count != 18) |
| return AE_ERROR; |
| for (i = 2; i < 18; i++) |
| if (fields[i].type != ACPI_TYPE_INTEGER) |
| return AE_ERROR; |
| hpx->t2 = &hpx->type2_data; |
| hpx->t2->revision = revision; |
| hpx->t2->unc_err_mask_and = fields[2].integer.value; |
| hpx->t2->unc_err_mask_or = fields[3].integer.value; |
| hpx->t2->unc_err_sever_and = fields[4].integer.value; |
| hpx->t2->unc_err_sever_or = fields[5].integer.value; |
| hpx->t2->cor_err_mask_and = fields[6].integer.value; |
| hpx->t2->cor_err_mask_or = fields[7].integer.value; |
| hpx->t2->adv_err_cap_and = fields[8].integer.value; |
| hpx->t2->adv_err_cap_or = fields[9].integer.value; |
| hpx->t2->pci_exp_devctl_and = fields[10].integer.value; |
| hpx->t2->pci_exp_devctl_or = fields[11].integer.value; |
| hpx->t2->pci_exp_lnkctl_and = fields[12].integer.value; |
| hpx->t2->pci_exp_lnkctl_or = fields[13].integer.value; |
| hpx->t2->sec_unc_err_sever_and = fields[14].integer.value; |
| hpx->t2->sec_unc_err_sever_or = fields[15].integer.value; |
| hpx->t2->sec_unc_err_mask_and = fields[16].integer.value; |
| hpx->t2->sec_unc_err_mask_or = fields[17].integer.value; |
| break; |
| default: |
| printk(KERN_WARNING |
| "%s: Type 2 Revision %d record not supported\n", |
| __func__, revision); |
| return AE_ERROR; |
| } |
| return AE_OK; |
| } |
| |
| static acpi_status acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx) |
| { |
| acpi_status status; |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; |
| union acpi_object *package, *record, *fields; |
| u32 type; |
| int i; |
| |
| /* Clear the return buffer with zeros */ |
| memset(hpx, 0, sizeof(struct hotplug_params)); |
| |
| status = acpi_evaluate_object(handle, "_HPX", NULL, &buffer); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| package = (union acpi_object *)buffer.pointer; |
| if (package->type != ACPI_TYPE_PACKAGE) { |
| status = AE_ERROR; |
| goto exit; |
| } |
| |
| for (i = 0; i < package->package.count; i++) { |
| record = &package->package.elements[i]; |
| if (record->type != ACPI_TYPE_PACKAGE) { |
| status = AE_ERROR; |
| goto exit; |
| } |
| |
| fields = record->package.elements; |
| if (fields[0].type != ACPI_TYPE_INTEGER || |
| fields[1].type != ACPI_TYPE_INTEGER) { |
| status = AE_ERROR; |
| goto exit; |
| } |
| |
| type = fields[0].integer.value; |
| switch (type) { |
| case 0: |
| status = decode_type0_hpx_record(record, hpx); |
| if (ACPI_FAILURE(status)) |
| goto exit; |
| break; |
| case 1: |
| status = decode_type1_hpx_record(record, hpx); |
| if (ACPI_FAILURE(status)) |
| goto exit; |
| break; |
| case 2: |
| status = decode_type2_hpx_record(record, hpx); |
| if (ACPI_FAILURE(status)) |
| goto exit; |
| break; |
| default: |
| printk(KERN_ERR "%s: Type %d record not supported\n", |
| __func__, type); |
| status = AE_ERROR; |
| goto exit; |
| } |
| } |
| exit: |
| kfree(buffer.pointer); |
| return status; |
| } |
| |
| static acpi_status acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) |
| { |
| acpi_status status; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *package, *fields; |
| int i; |
| |
| memset(hpp, 0, sizeof(struct hotplug_params)); |
| |
| status = acpi_evaluate_object(handle, "_HPP", NULL, &buffer); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| package = (union acpi_object *) buffer.pointer; |
| if (package->type != ACPI_TYPE_PACKAGE || |
| package->package.count != 4) { |
| status = AE_ERROR; |
| goto exit; |
| } |
| |
| fields = package->package.elements; |
| for (i = 0; i < 4; i++) { |
| if (fields[i].type != ACPI_TYPE_INTEGER) { |
| status = AE_ERROR; |
| goto exit; |
| } |
| } |
| |
| hpp->t0 = &hpp->type0_data; |
| hpp->t0->revision = 1; |
| hpp->t0->cache_line_size = fields[0].integer.value; |
| hpp->t0->latency_timer = fields[1].integer.value; |
| hpp->t0->enable_serr = fields[2].integer.value; |
| hpp->t0->enable_perr = fields[3].integer.value; |
| |
| exit: |
| kfree(buffer.pointer); |
| return status; |
| } |
| |
| /* pci_get_hp_params |
| * |
| * @dev - the pci_dev for which we want parameters |
| * @hpp - allocated by the caller |
| */ |
| int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp) |
| { |
| acpi_status status; |
| acpi_handle handle, phandle; |
| struct pci_bus *pbus; |
| |
| if (acpi_pci_disabled) |
| return -ENODEV; |
| |
| handle = NULL; |
| for (pbus = dev->bus; pbus; pbus = pbus->parent) { |
| handle = acpi_pci_get_bridge_handle(pbus); |
| if (handle) |
| break; |
| } |
| |
| /* |
| * _HPP settings apply to all child buses, until another _HPP is |
| * encountered. If we don't find an _HPP for the input pci dev, |
| * look for it in the parent device scope since that would apply to |
| * this pci dev. |
| */ |
| while (handle) { |
| status = acpi_run_hpx(handle, hpp); |
| if (ACPI_SUCCESS(status)) |
| return 0; |
| status = acpi_run_hpp(handle, hpp); |
| if (ACPI_SUCCESS(status)) |
| return 0; |
| if (acpi_is_root_bridge(handle)) |
| break; |
| status = acpi_get_parent(handle, &phandle); |
| if (ACPI_FAILURE(status)) |
| break; |
| handle = phandle; |
| } |
| return -ENODEV; |
| } |
| EXPORT_SYMBOL_GPL(pci_get_hp_params); |
| |
| /** |
| * pciehp_is_native - Check whether a hotplug port is handled by the OS |
| * @pdev: Hotplug port to check |
| * |
| * Walk up from @pdev to the host bridge, obtain its cached _OSC Control Field |
| * and return the value of the "PCI Express Native Hot Plug control" bit. |
| * On failure to obtain the _OSC Control Field return %false. |
| */ |
| bool pciehp_is_native(struct pci_dev *pdev) |
| { |
| struct acpi_pci_root *root; |
| acpi_handle handle; |
| |
| handle = acpi_find_root_bridge_handle(pdev); |
| if (!handle) |
| return false; |
| |
| root = acpi_pci_find_root(handle); |
| if (!root) |
| return false; |
| |
| return root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL; |
| } |
| |
| /** |
| * pci_acpi_wake_bus - Root bus wakeup notification fork function. |
| * @context: Device wakeup context. |
| */ |
| static void pci_acpi_wake_bus(struct acpi_device_wakeup_context *context) |
| { |
| struct acpi_device *adev; |
| struct acpi_pci_root *root; |
| |
| adev = container_of(context, struct acpi_device, wakeup.context); |
| root = acpi_driver_data(adev); |
| pci_pme_wakeup_bus(root->bus); |
| } |
| |
| /** |
| * pci_acpi_wake_dev - PCI device wakeup notification work function. |
| * @context: Device wakeup context. |
| */ |
| static void pci_acpi_wake_dev(struct acpi_device_wakeup_context *context) |
| { |
| struct pci_dev *pci_dev; |
| |
| pci_dev = to_pci_dev(context->dev); |
| |
| if (pci_dev->pme_poll) |
| pci_dev->pme_poll = false; |
| |
| if (pci_dev->current_state == PCI_D3cold) { |
| pci_wakeup_event(pci_dev); |
| pm_request_resume(&pci_dev->dev); |
| return; |
| } |
| |
| /* Clear PME Status if set. */ |
| if (pci_dev->pme_support) |
| pci_check_pme_status(pci_dev); |
| |
| pci_wakeup_event(pci_dev); |
| pm_request_resume(&pci_dev->dev); |
| |
| pci_pme_wakeup_bus(pci_dev->subordinate); |
| } |
| |
| /** |
| * pci_acpi_add_bus_pm_notifier - Register PM notifier for root PCI bus. |
| * @dev: PCI root bridge ACPI device. |
| */ |
| acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev) |
| { |
| return acpi_add_pm_notifier(dev, NULL, pci_acpi_wake_bus); |
| } |
| |
| /** |
| * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device. |
| * @dev: ACPI device to add the notifier for. |
| * @pci_dev: PCI device to check for the PME status if an event is signaled. |
| */ |
| acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, |
| struct pci_dev *pci_dev) |
| { |
| return acpi_add_pm_notifier(dev, &pci_dev->dev, pci_acpi_wake_dev); |
| } |
| |
| /* |
| * _SxD returns the D-state with the highest power |
| * (lowest D-state number) supported in the S-state "x". |
| * |
| * If the devices does not have a _PRW |
| * (Power Resources for Wake) supporting system wakeup from "x" |
| * then the OS is free to choose a lower power (higher number |
| * D-state) than the return value from _SxD. |
| * |
| * But if _PRW is enabled at S-state "x", the OS |
| * must not choose a power lower than _SxD -- |
| * unless the device has an _SxW method specifying |
| * the lowest power (highest D-state number) the device |
| * may enter while still able to wake the system. |
| * |
| * ie. depending on global OS policy: |
| * |
| * if (_PRW at S-state x) |
| * choose from highest power _SxD to lowest power _SxW |
| * else // no _PRW at S-state x |
| * choose highest power _SxD or any lower power |
| */ |
| |
| static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) |
| { |
| int acpi_state, d_max; |
| |
| if (pdev->no_d3cold) |
| d_max = ACPI_STATE_D3_HOT; |
| else |
| d_max = ACPI_STATE_D3_COLD; |
| acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL, d_max); |
| if (acpi_state < 0) |
| return PCI_POWER_ERROR; |
| |
| switch (acpi_state) { |
| case ACPI_STATE_D0: |
| return PCI_D0; |
| case ACPI_STATE_D1: |
| return PCI_D1; |
| case ACPI_STATE_D2: |
| return PCI_D2; |
| case ACPI_STATE_D3_HOT: |
| return PCI_D3hot; |
| case ACPI_STATE_D3_COLD: |
| return PCI_D3cold; |
| } |
| return PCI_POWER_ERROR; |
| } |
| |
| static bool acpi_pci_power_manageable(struct pci_dev *dev) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(&dev->dev); |
| return adev ? acpi_device_power_manageable(adev) : false; |
| } |
| |
| static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(&dev->dev); |
| static const u8 state_conv[] = { |
| [PCI_D0] = ACPI_STATE_D0, |
| [PCI_D1] = ACPI_STATE_D1, |
| [PCI_D2] = ACPI_STATE_D2, |
| [PCI_D3hot] = ACPI_STATE_D3_HOT, |
| [PCI_D3cold] = ACPI_STATE_D3_COLD, |
| }; |
| int error = -EINVAL; |
| |
| /* If the ACPI device has _EJ0, ignore the device */ |
| if (!adev || acpi_has_method(adev->handle, "_EJ0")) |
| return -ENODEV; |
| |
| switch (state) { |
| case PCI_D3cold: |
| if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) == |
| PM_QOS_FLAGS_ALL) { |
| error = -EBUSY; |
| break; |
| } |
| case PCI_D0: |
| case PCI_D1: |
| case PCI_D2: |
| case PCI_D3hot: |
| error = acpi_device_set_power(adev, state_conv[state]); |
| } |
| |
| if (!error) |
| dev_dbg(&dev->dev, "power state changed by ACPI to %s\n", |
| acpi_power_state_string(state_conv[state])); |
| |
| return error; |
| } |
| |
| static pci_power_t acpi_pci_get_power_state(struct pci_dev *dev) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(&dev->dev); |
| static const pci_power_t state_conv[] = { |
| [ACPI_STATE_D0] = PCI_D0, |
| [ACPI_STATE_D1] = PCI_D1, |
| [ACPI_STATE_D2] = PCI_D2, |
| [ACPI_STATE_D3_HOT] = PCI_D3hot, |
| [ACPI_STATE_D3_COLD] = PCI_D3cold, |
| }; |
| int state; |
| |
| if (!adev || !acpi_device_power_manageable(adev)) |
| return PCI_UNKNOWN; |
| |
| if (acpi_device_get_power(adev, &state) || state == ACPI_STATE_UNKNOWN) |
| return PCI_UNKNOWN; |
| |
| return state_conv[state]; |
| } |
| |
| static int acpi_pci_propagate_wakeup(struct pci_bus *bus, bool enable) |
| { |
| while (bus->parent) { |
| if (acpi_pm_device_can_wakeup(&bus->self->dev)) |
| return acpi_pm_set_device_wakeup(&bus->self->dev, enable); |
| |
| bus = bus->parent; |
| } |
| |
| /* We have reached the root bus. */ |
| if (bus->bridge) { |
| if (acpi_pm_device_can_wakeup(bus->bridge)) |
| return acpi_pm_set_device_wakeup(bus->bridge, enable); |
| } |
| return 0; |
| } |
| |
| static int acpi_pci_wakeup(struct pci_dev *dev, bool enable) |
| { |
| if (acpi_pm_device_can_wakeup(&dev->dev)) |
| return acpi_pm_set_device_wakeup(&dev->dev, enable); |
| |
| return acpi_pci_propagate_wakeup(dev->bus, enable); |
| } |
| |
| static bool acpi_pci_need_resume(struct pci_dev *dev) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(&dev->dev); |
| |
| if (!adev || !acpi_device_power_manageable(adev)) |
| return false; |
| |
| if (device_may_wakeup(&dev->dev) != !!adev->wakeup.prepare_count) |
| return true; |
| |
| if (acpi_target_system_state() == ACPI_STATE_S0) |
| return false; |
| |
| return !!adev->power.flags.dsw_present; |
| } |
| |
| static const struct pci_platform_pm_ops acpi_pci_platform_pm = { |
| .is_manageable = acpi_pci_power_manageable, |
| .set_state = acpi_pci_set_power_state, |
| .get_state = acpi_pci_get_power_state, |
| .choose_state = acpi_pci_choose_state, |
| .set_wakeup = acpi_pci_wakeup, |
| .need_resume = acpi_pci_need_resume, |
| }; |
| |
| void acpi_pci_add_bus(struct pci_bus *bus) |
| { |
| union acpi_object *obj; |
| struct pci_host_bridge *bridge; |
| |
| if (acpi_pci_disabled || !bus->bridge) |
| return; |
| |
| acpi_pci_slot_enumerate(bus); |
| acpiphp_enumerate_slots(bus); |
| |
| /* |
| * For a host bridge, check its _DSM for function 8 and if |
| * that is available, mark it in pci_host_bridge. |
| */ |
| if (!pci_is_root_bus(bus)) |
| return; |
| |
| obj = acpi_evaluate_dsm(ACPI_HANDLE(bus->bridge), &pci_acpi_dsm_guid, 3, |
| RESET_DELAY_DSM, NULL); |
| if (!obj) |
| return; |
| |
| if (obj->type == ACPI_TYPE_INTEGER && obj->integer.value == 1) { |
| bridge = pci_find_host_bridge(bus); |
| bridge->ignore_reset_delay = 1; |
| } |
| ACPI_FREE(obj); |
| } |
| |
| void acpi_pci_remove_bus(struct pci_bus *bus) |
| { |
| if (acpi_pci_disabled || !bus->bridge) |
| return; |
| |
| acpiphp_remove_slots(bus); |
| acpi_pci_slot_remove(bus); |
| } |
| |
| /* ACPI bus type */ |
| static struct acpi_device *acpi_pci_find_companion(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| bool check_children; |
| u64 addr; |
| |
| check_children = pci_is_bridge(pci_dev); |
| /* Please ref to ACPI spec for the syntax of _ADR */ |
| addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); |
| return acpi_find_child_device(ACPI_COMPANION(dev->parent), addr, |
| check_children); |
| } |
| |
| /** |
| * pci_acpi_optimize_delay - optimize PCI D3 and D3cold delay from ACPI |
| * @pdev: the PCI device whose delay is to be updated |
| * @handle: ACPI handle of this device |
| * |
| * Update the d3_delay and d3cold_delay of a PCI device from the ACPI _DSM |
| * control method of either the device itself or the PCI host bridge. |
| * |
| * Function 8, "Reset Delay," applies to the entire hierarchy below a PCI |
| * host bridge. If it returns one, the OS may assume that all devices in |
| * the hierarchy have already completed power-on reset delays. |
| * |
| * Function 9, "Device Readiness Durations," applies only to the object |
| * where it is located. It returns delay durations required after various |
| * events if the device requires less time than the spec requires. Delays |
| * from this function take precedence over the Reset Delay function. |
| * |
| * These _DSM functions are defined by the draft ECN of January 28, 2014, |
| * titled "ACPI additions for FW latency optimizations." |
| */ |
| static void pci_acpi_optimize_delay(struct pci_dev *pdev, |
| acpi_handle handle) |
| { |
| struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); |
| int value; |
| union acpi_object *obj, *elements; |
| |
| if (bridge->ignore_reset_delay) |
| pdev->d3cold_delay = 0; |
| |
| obj = acpi_evaluate_dsm(handle, &pci_acpi_dsm_guid, 3, |
| FUNCTION_DELAY_DSM, NULL); |
| if (!obj) |
| return; |
| |
| if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 5) { |
| elements = obj->package.elements; |
| if (elements[0].type == ACPI_TYPE_INTEGER) { |
| value = (int)elements[0].integer.value / 1000; |
| if (value < PCI_PM_D3COLD_WAIT) |
| pdev->d3cold_delay = value; |
| } |
| if (elements[3].type == ACPI_TYPE_INTEGER) { |
| value = (int)elements[3].integer.value / 1000; |
| if (value < PCI_PM_D3_WAIT) |
| pdev->d3_delay = value; |
| } |
| } |
| ACPI_FREE(obj); |
| } |
| |
| static void pci_acpi_setup(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct acpi_device *adev = ACPI_COMPANION(dev); |
| |
| if (!adev) |
| return; |
| |
| pci_acpi_optimize_delay(pci_dev, adev->handle); |
| |
| pci_acpi_add_pm_notifier(adev, pci_dev); |
| if (!adev->wakeup.flags.valid) |
| return; |
| |
| device_set_wakeup_capable(dev, true); |
| acpi_pci_wakeup(pci_dev, false); |
| } |
| |
| static void pci_acpi_cleanup(struct device *dev) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(dev); |
| |
| if (!adev) |
| return; |
| |
| pci_acpi_remove_pm_notifier(adev); |
| if (adev->wakeup.flags.valid) |
| device_set_wakeup_capable(dev, false); |
| } |
| |
| static bool pci_acpi_bus_match(struct device *dev) |
| { |
| return dev_is_pci(dev); |
| } |
| |
| static struct acpi_bus_type acpi_pci_bus = { |
| .name = "PCI", |
| .match = pci_acpi_bus_match, |
| .find_companion = acpi_pci_find_companion, |
| .setup = pci_acpi_setup, |
| .cleanup = pci_acpi_cleanup, |
| }; |
| |
| |
| static struct fwnode_handle *(*pci_msi_get_fwnode_cb)(struct device *dev); |
| |
| /** |
| * pci_msi_register_fwnode_provider - Register callback to retrieve fwnode |
| * @fn: Callback matching a device to a fwnode that identifies a PCI |
| * MSI domain. |
| * |
| * This should be called by irqchip driver, which is the parent of |
| * the MSI domain to provide callback interface to query fwnode. |
| */ |
| void |
| pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *)) |
| { |
| pci_msi_get_fwnode_cb = fn; |
| } |
| |
| /** |
| * pci_host_bridge_acpi_msi_domain - Retrieve MSI domain of a PCI host bridge |
| * @bus: The PCI host bridge bus. |
| * |
| * This function uses the callback function registered by |
| * pci_msi_register_fwnode_provider() to retrieve the irq_domain with |
| * type DOMAIN_BUS_PCI_MSI of the specified host bridge bus. |
| * This returns NULL on error or when the domain is not found. |
| */ |
| struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) |
| { |
| struct fwnode_handle *fwnode; |
| |
| if (!pci_msi_get_fwnode_cb) |
| return NULL; |
| |
| fwnode = pci_msi_get_fwnode_cb(&bus->dev); |
| if (!fwnode) |
| return NULL; |
| |
| return irq_find_matching_fwnode(fwnode, DOMAIN_BUS_PCI_MSI); |
| } |
| |
| static int __init acpi_pci_init(void) |
| { |
| int ret; |
| |
| if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_MSI) { |
| pr_info("ACPI FADT declares the system doesn't support MSI, so disable it\n"); |
| pci_no_msi(); |
| } |
| |
| if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) { |
| pr_info("ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n"); |
| pcie_no_aspm(); |
| } |
| |
| ret = register_acpi_bus_type(&acpi_pci_bus); |
| if (ret) |
| return 0; |
| |
| pci_set_platform_pm(&acpi_pci_platform_pm); |
| acpi_pci_slot_init(); |
| acpiphp_init(); |
| |
| return 0; |
| } |
| arch_initcall(acpi_pci_init); |