| /* |
| * IBM Automatic Server Restart driver. |
| * |
| * Copyright (c) 2005 Andrey Panin <pazke@donpac.ru> |
| * |
| * Based on driver written by Pete Reynolds. |
| * Copyright (c) IBM Corporation, 1998-2004. |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU Public License, incorporated herein by reference. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/fs.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/timer.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/dmi.h> |
| |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| |
| |
| enum { |
| ASMTYPE_UNKNOWN, |
| ASMTYPE_TOPAZ, |
| ASMTYPE_JASPER, |
| ASMTYPE_PEARL, |
| ASMTYPE_JUNIPER, |
| ASMTYPE_SPRUCE, |
| }; |
| |
| #define PFX "ibmasr: " |
| |
| #define TOPAZ_ASR_REG_OFFSET 4 |
| #define TOPAZ_ASR_TOGGLE 0x40 |
| #define TOPAZ_ASR_DISABLE 0x80 |
| |
| /* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */ |
| #define PEARL_BASE 0xe04 |
| #define PEARL_WRITE 0xe06 |
| #define PEARL_READ 0xe07 |
| |
| #define PEARL_ASR_DISABLE_MASK 0x80 /* bit 7: disable = 1, enable = 0 */ |
| #define PEARL_ASR_TOGGLE_MASK 0x40 /* bit 6: 0, then 1, then 0 */ |
| |
| /* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */ |
| #define JASPER_ASR_REG_OFFSET 0x38 |
| |
| #define JASPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1, enable = 0 */ |
| #define JASPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */ |
| |
| #define JUNIPER_BASE_ADDRESS 0x54b /* Base address of Juniper ASR */ |
| #define JUNIPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1 enable = 0 */ |
| #define JUNIPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */ |
| |
| #define SPRUCE_BASE_ADDRESS 0x118e /* Base address of Spruce ASR */ |
| #define SPRUCE_ASR_DISABLE_MASK 0x01 /* bit 1: disable = 1 enable = 0 */ |
| #define SPRUCE_ASR_TOGGLE_MASK 0x02 /* bit 0: 0, then 1, then 0 */ |
| |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| |
| static unsigned long asr_is_open; |
| static char asr_expect_close; |
| |
| static unsigned int asr_type, asr_base, asr_length; |
| static unsigned int asr_read_addr, asr_write_addr; |
| static unsigned char asr_toggle_mask, asr_disable_mask; |
| |
| static void asr_toggle(void) |
| { |
| unsigned char reg = inb(asr_read_addr); |
| |
| outb(reg & ~asr_toggle_mask, asr_write_addr); |
| reg = inb(asr_read_addr); |
| |
| outb(reg | asr_toggle_mask, asr_write_addr); |
| reg = inb(asr_read_addr); |
| |
| outb(reg & ~asr_toggle_mask, asr_write_addr); |
| reg = inb(asr_read_addr); |
| } |
| |
| static void asr_enable(void) |
| { |
| unsigned char reg; |
| |
| if (asr_type == ASMTYPE_TOPAZ) { |
| /* asr_write_addr == asr_read_addr */ |
| reg = inb(asr_read_addr); |
| outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE), |
| asr_read_addr); |
| } else { |
| /* |
| * First make sure the hardware timer is reset by toggling |
| * ASR hardware timer line. |
| */ |
| asr_toggle(); |
| |
| reg = inb(asr_read_addr); |
| outb(reg & ~asr_disable_mask, asr_write_addr); |
| } |
| reg = inb(asr_read_addr); |
| } |
| |
| static void asr_disable(void) |
| { |
| unsigned char reg = inb(asr_read_addr); |
| |
| if (asr_type == ASMTYPE_TOPAZ) |
| /* asr_write_addr == asr_read_addr */ |
| outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE, |
| asr_read_addr); |
| else { |
| outb(reg | asr_toggle_mask, asr_write_addr); |
| reg = inb(asr_read_addr); |
| |
| outb(reg | asr_disable_mask, asr_write_addr); |
| } |
| reg = inb(asr_read_addr); |
| } |
| |
| static int __init asr_get_base_address(void) |
| { |
| unsigned char low, high; |
| const char *type = ""; |
| |
| asr_length = 1; |
| |
| switch (asr_type) { |
| case ASMTYPE_TOPAZ: |
| /* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */ |
| outb(0x07, 0x2e); |
| outb(0x07, 0x2f); |
| |
| /* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */ |
| outb(0x60, 0x2e); |
| high = inb(0x2f); |
| |
| /* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */ |
| outb(0x61, 0x2e); |
| low = inb(0x2f); |
| |
| asr_base = (high << 16) | low; |
| asr_read_addr = asr_write_addr = |
| asr_base + TOPAZ_ASR_REG_OFFSET; |
| asr_length = 5; |
| |
| break; |
| |
| case ASMTYPE_JASPER: |
| type = "Jaspers "; |
| |
| /* FIXME: need to use pci_config_lock here, but it's not exported */ |
| |
| /* spin_lock_irqsave(&pci_config_lock, flags);*/ |
| |
| /* Select the SuperIO chip in the PCI I/O port register */ |
| outl(0x8000f858, 0xcf8); |
| |
| /* |
| * Read the base address for the SuperIO chip. |
| * Only the lower 16 bits are valid, but the address is word |
| * aligned so the last bit must be masked off. |
| */ |
| asr_base = inl(0xcfc) & 0xfffe; |
| |
| /* spin_unlock_irqrestore(&pci_config_lock, flags);*/ |
| |
| asr_read_addr = asr_write_addr = |
| asr_base + JASPER_ASR_REG_OFFSET; |
| asr_toggle_mask = JASPER_ASR_TOGGLE_MASK; |
| asr_disable_mask = JASPER_ASR_DISABLE_MASK; |
| asr_length = JASPER_ASR_REG_OFFSET + 1; |
| |
| break; |
| |
| case ASMTYPE_PEARL: |
| type = "Pearls "; |
| asr_base = PEARL_BASE; |
| asr_read_addr = PEARL_READ; |
| asr_write_addr = PEARL_WRITE; |
| asr_toggle_mask = PEARL_ASR_TOGGLE_MASK; |
| asr_disable_mask = PEARL_ASR_DISABLE_MASK; |
| asr_length = 4; |
| break; |
| |
| case ASMTYPE_JUNIPER: |
| type = "Junipers "; |
| asr_base = JUNIPER_BASE_ADDRESS; |
| asr_read_addr = asr_write_addr = asr_base; |
| asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK; |
| asr_disable_mask = JUNIPER_ASR_DISABLE_MASK; |
| break; |
| |
| case ASMTYPE_SPRUCE: |
| type = "Spruce's "; |
| asr_base = SPRUCE_BASE_ADDRESS; |
| asr_read_addr = asr_write_addr = asr_base; |
| asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK; |
| asr_disable_mask = SPRUCE_ASR_DISABLE_MASK; |
| break; |
| } |
| |
| if (!request_region(asr_base, asr_length, "ibmasr")) { |
| printk(KERN_ERR PFX "address %#x already in use\n", |
| asr_base); |
| return -EBUSY; |
| } |
| |
| printk(KERN_INFO PFX "found %sASR @ addr %#x\n", type, asr_base); |
| |
| return 0; |
| } |
| |
| |
| static ssize_t asr_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| if (count) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* In case it was set long ago */ |
| asr_expect_close = 0; |
| |
| for (i = 0; i != count; i++) { |
| char c; |
| if (get_user(c, buf + i)) |
| return -EFAULT; |
| if (c == 'V') |
| asr_expect_close = 42; |
| } |
| } |
| asr_toggle(); |
| } |
| return count; |
| } |
| |
| static int asr_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| static const struct watchdog_info ident = { |
| .options = WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| .identity = "IBM ASR" |
| }; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| int heartbeat; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &ident, sizeof(ident)) ? |
| -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| |
| case WDIOC_KEEPALIVE: |
| asr_toggle(); |
| return 0; |
| |
| /* |
| * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT |
| * and WDIOC_GETTIMEOUT always returns 256. |
| */ |
| case WDIOC_GETTIMEOUT: |
| heartbeat = 256; |
| return put_user(heartbeat, p); |
| |
| case WDIOC_SETOPTIONS: { |
| int new_options, retval = -EINVAL; |
| |
| if (get_user(new_options, p)) |
| return -EFAULT; |
| |
| if (new_options & WDIOS_DISABLECARD) { |
| asr_disable(); |
| retval = 0; |
| } |
| |
| if (new_options & WDIOS_ENABLECARD) { |
| asr_enable(); |
| asr_toggle(); |
| retval = 0; |
| } |
| |
| return retval; |
| } |
| } |
| |
| return -ENOIOCTLCMD; |
| } |
| |
| static int asr_open(struct inode *inode, struct file *file) |
| { |
| if(test_and_set_bit(0, &asr_is_open)) |
| return -EBUSY; |
| |
| asr_toggle(); |
| asr_enable(); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int asr_release(struct inode *inode, struct file *file) |
| { |
| if (asr_expect_close == 42) |
| asr_disable(); |
| else { |
| printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n"); |
| asr_toggle(); |
| } |
| clear_bit(0, &asr_is_open); |
| asr_expect_close = 0; |
| return 0; |
| } |
| |
| static struct file_operations asr_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = asr_write, |
| .ioctl = asr_ioctl, |
| .open = asr_open, |
| .release = asr_release, |
| }; |
| |
| static struct miscdevice asr_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &asr_fops, |
| }; |
| |
| |
| struct ibmasr_id { |
| const char *desc; |
| int type; |
| }; |
| |
| static struct ibmasr_id __initdata ibmasr_id_table[] = { |
| { "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ }, |
| { "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL }, |
| { "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER }, |
| { "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER }, |
| { "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE }, |
| { NULL } |
| }; |
| |
| static int __init ibmasr_init(void) |
| { |
| struct ibmasr_id *id; |
| int rc; |
| |
| for (id = ibmasr_id_table; id->desc; id++) { |
| if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) { |
| asr_type = id->type; |
| break; |
| } |
| } |
| |
| if (!asr_type) |
| return -ENODEV; |
| |
| rc = misc_register(&asr_miscdev); |
| if (rc < 0) { |
| printk(KERN_ERR PFX "failed to register misc device\n"); |
| return rc; |
| } |
| |
| rc = asr_get_base_address(); |
| if (rc) { |
| misc_deregister(&asr_miscdev); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit ibmasr_exit(void) |
| { |
| if (!nowayout) |
| asr_disable(); |
| |
| misc_deregister(&asr_miscdev); |
| |
| release_region(asr_base, asr_length); |
| } |
| |
| module_init(ibmasr_init); |
| module_exit(ibmasr_exit); |
| |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); |
| |
| MODULE_DESCRIPTION("IBM Automatic Server Restart driver"); |
| MODULE_AUTHOR("Andrey Panin"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |