stmmac: fix EEE setup
This patch fixes the EEE setup allowing to configure this support
when the link changes.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ee919ca..e9eab29 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -130,7 +130,7 @@
static int eee_timer = STMMAC_DEFAULT_LPI_TIMER;
module_param(eee_timer, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec");
-#define STMMAC_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x))
+#define STMMAC_LPI_T(x) (jiffies + msecs_to_jiffies(x))
/* By default the driver will use the ring mode to manage tx and rx descriptors
* but passing this value so user can force to use the chain instead of the ring
@@ -288,7 +288,7 @@
struct stmmac_priv *priv = (struct stmmac_priv *)arg;
stmmac_enable_eee_mode(priv);
- mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer));
+ mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer));
}
/**
@@ -304,22 +304,34 @@
{
bool ret = false;
+ /* Using PCS we cannot dial with the phy registers at this stage
+ * so we do not support extra feature like EEE.
+ */
+ if ((priv->pcs == STMMAC_PCS_RGMII) || (priv->pcs == STMMAC_PCS_TBI) ||
+ (priv->pcs == STMMAC_PCS_RTBI))
+ goto out;
+
/* MAC core supports the EEE feature. */
if (priv->dma_cap.eee) {
/* Check if the PHY supports EEE */
if (phy_init_eee(priv->phydev, 1))
goto out;
- priv->eee_active = 1;
- init_timer(&priv->eee_ctrl_timer);
- priv->eee_ctrl_timer.function = stmmac_eee_ctrl_timer;
- priv->eee_ctrl_timer.data = (unsigned long)priv;
- priv->eee_ctrl_timer.expires = STMMAC_LPI_TIMER(eee_timer);
- add_timer(&priv->eee_ctrl_timer);
+ if (!priv->eee_active) {
+ priv->eee_active = 1;
+ init_timer(&priv->eee_ctrl_timer);
+ priv->eee_ctrl_timer.function = stmmac_eee_ctrl_timer;
+ priv->eee_ctrl_timer.data = (unsigned long)priv;
+ priv->eee_ctrl_timer.expires = STMMAC_LPI_T(eee_timer);
+ add_timer(&priv->eee_ctrl_timer);
- priv->hw->mac->set_eee_timer(priv->ioaddr,
- STMMAC_DEFAULT_LIT_LS_TIMER,
- priv->tx_lpi_timer);
+ priv->hw->mac->set_eee_timer(priv->ioaddr,
+ STMMAC_DEFAULT_LIT_LS,
+ priv->tx_lpi_timer);
+ } else
+ /* Set HW EEE according to the speed */
+ priv->hw->mac->set_eee_pls(priv->ioaddr,
+ priv->phydev->link);
pr_info("stmmac: Energy-Efficient Ethernet initialized\n");
@@ -329,20 +341,6 @@
return ret;
}
-/**
- * stmmac_eee_adjust: adjust HW EEE according to the speed
- * @priv: driver private structure
- * Description:
- * When the EEE has been already initialised we have to
- * modify the PLS bit in the LPI ctrl & status reg according
- * to the PHY link status. For this reason.
- */
-static void stmmac_eee_adjust(struct stmmac_priv *priv)
-{
- if (priv->eee_enabled)
- priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link);
-}
-
/* stmmac_get_tx_hwtstamp: get HW TX timestamps
* @priv: driver private structure
* @entry : descriptor index to be used.
@@ -769,7 +767,10 @@
if (new_state && netif_msg_link(priv))
phy_print_status(phydev);
- stmmac_eee_adjust(priv);
+ /* At this stage, it could be needed to setup the EEE or adjust some
+ * MAC related HW registers.
+ */
+ priv->eee_enabled = stmmac_eee_init(priv);
spin_unlock_irqrestore(&priv->lock, flags);
@@ -1277,7 +1278,7 @@
if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) {
stmmac_enable_eee_mode(priv);
- mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer));
+ mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer));
}
spin_unlock(&priv->tx_lock);
}
@@ -1671,14 +1672,9 @@
if (priv->phydev)
phy_start(priv->phydev);
- priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS_TIMER;
+ priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
- /* Using PCS we cannot dial with the phy registers at this stage
- * so we do not support extra feature like EEE.
- */
- if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI &&
- priv->pcs != STMMAC_PCS_RTBI)
- priv->eee_enabled = stmmac_eee_init(priv);
+ priv->eee_enabled = stmmac_eee_init(priv);
stmmac_init_tx_coalesce(priv);