Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] fix kprobes single stepping
[S390] tape: fix dbf usage
[S390] dasd: provide a Sense Path Group ID ioctl
[S390] ftrace: select HAVE_C_RECORDMCOUNT
[S390] vdso: get rid of redefinition warnings
[S390] facility detection: remove unused variable
[S390] hypfs: Fix error handling in hypfs_diag initialization
[S390] topology: fix cpu masks for topology=off case
[S390] topology: add SCHED_MC config option
[S390] Kconfig: add machine type number to code generation options
[S390] Add z196 machine type to setup_hwcaps
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index fabb40b..e0b98e7 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -80,6 +80,7 @@
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_C_RECORDMCOUNT
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_GRAPH_TRACER
@@ -144,7 +145,7 @@
config 64BIT
bool "64 bit kernel"
help
- Select this option if you have a 64 bit IBM zSeries machine
+ Select this option if you have an IBM z/Architecture machine
and want to use the 64 bit addressing mode.
config 32BIT
@@ -196,9 +197,18 @@
can be controlled through /sys/devices/system/cpu/cpu#.
Say N if you want to disable CPU hotplug.
+config SCHED_MC
+ def_bool y
+ prompt "Multi-core scheduler support"
+ depends on SMP
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places.
+
config SCHED_BOOK
bool "Book scheduler support"
- depends on SMP
+ depends on SMP && SCHED_MC
help
Book scheduler support improves the CPU scheduler's decision making
when dealing with machines that have several books.
@@ -208,7 +218,7 @@
depends on MARCH_G5
help
This option is required for IEEE compliant floating point arithmetic
- on older S/390 machines. Say Y unless you know your machine doesn't
+ on older ESA/390 machines. Say Y unless you know your machine doesn't
need this.
config COMPAT
@@ -237,8 +247,8 @@
space programs and it also selects the addressing mode option above.
The kernel parameter noexec=on will enable this feature and also
switch the addressing modes, default is disabled. Enabling this (via
- kernel parameter) on machines earlier than IBM System z9-109 EC/BC
- will reduce system performance.
+ kernel parameter) on machines earlier than IBM System z9 this will
+ reduce system performance.
comment "Code generation options"
@@ -247,49 +257,46 @@
default MARCH_G5
config MARCH_G5
- bool "S/390 model G5 and G6"
+ bool "System/390 model G5 and G6"
depends on !64BIT
help
Select this to build a 31 bit kernel that works
- on all S/390 and zSeries machines.
+ on all ESA/390 and z/Architecture machines.
config MARCH_Z900
- bool "IBM eServer zSeries model z800 and z900"
+ bool "IBM zSeries model z800 and z900"
help
- Select this to optimize for zSeries machines. This
- will enable some optimizations that are not available
- on older 31 bit only CPUs.
+ Select this to enable optimizations for model z800/z900 (2064 and
+ 2066 series). This will enable some optimizations that are not
+ available on older ESA/390 (31 Bit) only CPUs.
config MARCH_Z990
- bool "IBM eServer zSeries model z890 and z990"
+ bool "IBM zSeries model z890 and z990"
help
- Select this enable optimizations for model z890/z990.
- This will be slightly faster but does not work on
- older machines such as the z900.
+ Select this to enable optimizations for model z890/z990 (2084 and
+ 2086 series). The kernel will be slightly faster but will not work
+ on older machines.
config MARCH_Z9_109
bool "IBM System z9"
help
- Select this to enable optimizations for IBM System z9-109, IBM
- System z9 Enterprise Class (z9 EC), and IBM System z9 Business
- Class (z9 BC). The kernel will be slightly faster but will not
- work on older machines such as the z990, z890, z900, and z800.
+ Select this to enable optimizations for IBM System z9 (2094 and
+ 2096 series). The kernel will be slightly faster but will not work
+ on older machines.
config MARCH_Z10
bool "IBM System z10"
help
- Select this to enable optimizations for IBM System z10. The
- kernel will be slightly faster but will not work on older
- machines such as the z990, z890, z900, z800, z9-109, z9-ec
- and z9-bc.
+ Select this to enable optimizations for IBM System z10 (2097 and
+ 2098 series). The kernel will be slightly faster but will not work
+ on older machines.
config MARCH_Z196
bool "IBM zEnterprise 196"
help
- Select this to enable optimizations for IBM zEnterprise 196.
- The kernel will be slightly faster but will not work on older
- machines such as the z990, z890, z900, z800, z9-109, z9-ec,
- z9-bc, z10-ec and z10-bc.
+ Select this to enable optimizations for IBM zEnterprise 196
+ (2817 series). The kernel will be slightly faster but will not work
+ on older machines.
endchoice
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index 020e51c..cd4a81b 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -638,18 +638,21 @@
pr_err("The hardware system does not support hypfs\n");
return -ENODATA;
}
- rc = diag224_get_name_table();
- if (rc) {
- diag204_free_buffer();
- pr_err("The hardware system does not provide all "
- "functions required by hypfs\n");
- }
if (diag204_info_type == INFO_EXT) {
rc = hypfs_dbfs_init();
if (rc)
- diag204_free_buffer();
+ return rc;
}
- return rc;
+ if (MACHINE_IS_LPAR) {
+ rc = diag224_get_name_table();
+ if (rc) {
+ pr_err("The hardware system does not provide all "
+ "functions required by hypfs\n");
+ debugfs_remove(dbfs_d204_file);
+ return rc;
+ }
+ }
+ return 0;
}
void hypfs_diag_exit(void)
diff --git a/arch/s390/include/asm/dasd.h b/arch/s390/include/asm/dasd.h
index 218bce8..b604a91 100644
--- a/arch/s390/include/asm/dasd.h
+++ b/arch/s390/include/asm/dasd.h
@@ -217,6 +217,25 @@
int rssd_result_len;
} __attribute__ ((packed)) dasd_symmio_parms_t;
+/*
+ * Data returned by Sense Path Group ID (SNID)
+ */
+struct dasd_snid_data {
+ struct {
+ __u8 group:2;
+ __u8 reserve:2;
+ __u8 mode:1;
+ __u8 res:3;
+ } __attribute__ ((packed)) path_state;
+ __u8 pgid[11];
+} __attribute__ ((packed));
+
+struct dasd_snid_ioctl_data {
+ struct dasd_snid_data data;
+ __u8 path_mask;
+} __attribute__ ((packed));
+
+
/********************************************************************************
* SECTION: Definition of IOCTLs
*
@@ -261,25 +280,10 @@
/* Set Attributes (cache operations) */
#define BIODASDSATTR _IOW(DASD_IOCTL_LETTER,2,attrib_data_t)
+/* Get Sense Path Group ID (SNID) data */
+#define BIODASDSNID _IOWR(DASD_IOCTL_LETTER, 1, struct dasd_snid_ioctl_data)
+
#define BIODASDSYMMIO _IOWR(DASD_IOCTL_LETTER, 240, dasd_symmio_parms_t)
#endif /* DASD_H */
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index f3c1b82..33982e7 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -66,9 +66,9 @@
DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
/* constants used by the vdso */
- DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
- DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
- DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
+ DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME);
+ DEFINE(__CLOCK_MONOTONIC, CLOCK_MONOTONIC);
+ DEFINE(__CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
BLANK();
/* constants for SIGP */
DEFINE(__SIGP_STOP, sigp_stop);
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index d149609..3b7e7dd 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -282,8 +282,6 @@
static noinline __init void setup_hpage(void)
{
#ifndef CONFIG_DEBUG_PAGEALLOC
- unsigned int facilities;
-
if (!test_facility(2) || !test_facility(8))
return;
S390_lowcore.machine_flags |= MACHINE_FLAG_HPAGE;
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 5efce72..1ecc337 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -557,6 +557,7 @@
# per was called from kernel, must be kprobes
#
kernel_per:
+ REENABLE_IRQS
mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index a2be239..8f3e80217 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -568,6 +568,7 @@
# per was called from kernel, must be kprobes
#
kernel_per:
+ REENABLE_IRQS
xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
brasl %r14,do_single_step
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 2a3d2bf..d60fc43 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -316,6 +316,8 @@
return 1;
ss_probe:
+ if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
+ local_irq_disable();
prepare_singlestep(p, regs);
kcb->kprobe_status = KPROBE_HIT_SS;
return 1;
@@ -463,6 +465,8 @@
goto out;
}
reset_current_kprobe();
+ if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
+ local_irq_enable();
out:
preempt_enable_no_resched();
@@ -502,8 +506,11 @@
regs->psw.mask |= kcb->kprobe_saved_imask;
if (kcb->kprobe_status == KPROBE_REENTER)
restore_previous_kprobe(kcb);
- else
+ else {
reset_current_kprobe();
+ if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
+ local_irq_enable();
+ }
preempt_enable_no_resched();
break;
case KPROBE_HIT_ACTIVE:
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index e3ceb91..6f63508 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -761,6 +761,9 @@
case 0x2098:
strcpy(elf_platform, "z10");
break;
+ case 0x2817:
+ strcpy(elf_platform, "z196");
+ break;
}
}
diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index f04d93a..5c9e439 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -106,11 +106,13 @@
for (i = 0; i < TOPOLOGY_NR_MAG; i++)
len += sprintf(page + len, " %d", info->mag[i]);
len += sprintf(page + len, "\n");
+#ifdef CONFIG_SCHED_MC
store_topology(info);
len += sprintf(page + len, "CPU Topology SW: ");
for (i = 0; i < TOPOLOGY_NR_MAG; i++)
len += sprintf(page + len, " %d", info->mag[i]);
len += sprintf(page + len, "\n");
+#endif
return len;
}
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index a9dee90..94b06c3 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -53,8 +53,10 @@
cpumask_t mask;
cpus_clear(mask);
- if (!topology_enabled || !MACHINE_HAS_TOPOLOGY)
- return cpu_possible_map;
+ if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) {
+ cpumask_copy(&mask, cpumask_of(cpu));
+ return mask;
+ }
while (info) {
if (cpu_isset(cpu, info->mask)) {
mask = info->mask;
diff --git a/arch/s390/kernel/vdso32/clock_getres.S b/arch/s390/kernel/vdso32/clock_getres.S
index 9532c4e..36aaa25 100644
--- a/arch/s390/kernel/vdso32/clock_getres.S
+++ b/arch/s390/kernel/vdso32/clock_getres.S
@@ -19,9 +19,9 @@
.type __kernel_clock_getres,@function
__kernel_clock_getres:
.cfi_startproc
- chi %r2,CLOCK_REALTIME
+ chi %r2,__CLOCK_REALTIME
je 0f
- chi %r2,CLOCK_MONOTONIC
+ chi %r2,__CLOCK_MONOTONIC
jne 3f
0: ltr %r3,%r3
jz 2f /* res == NULL */
@@ -34,6 +34,6 @@
3: lhi %r1,__NR_clock_getres /* fallback to svc */
svc 0
br %r14
-4: .long CLOCK_REALTIME_RES
+4: .long __CLOCK_REALTIME_RES
.cfi_endproc
.size __kernel_clock_getres,.-__kernel_clock_getres
diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S
index 9696439..b2224e0 100644
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@@ -21,9 +21,9 @@
.cfi_startproc
basr %r5,0
0: al %r5,21f-0b(%r5) /* get &_vdso_data */
- chi %r2,CLOCK_REALTIME
+ chi %r2,__CLOCK_REALTIME
je 10f
- chi %r2,CLOCK_MONOTONIC
+ chi %r2,__CLOCK_MONOTONIC
jne 19f
/* CLOCK_MONOTONIC */
diff --git a/arch/s390/kernel/vdso64/clock_getres.S b/arch/s390/kernel/vdso64/clock_getres.S
index 9ce8caa..176e1f7 100644
--- a/arch/s390/kernel/vdso64/clock_getres.S
+++ b/arch/s390/kernel/vdso64/clock_getres.S
@@ -19,9 +19,9 @@
.type __kernel_clock_getres,@function
__kernel_clock_getres:
.cfi_startproc
- cghi %r2,CLOCK_REALTIME
+ cghi %r2,__CLOCK_REALTIME
je 0f
- cghi %r2,CLOCK_MONOTONIC
+ cghi %r2,__CLOCK_MONOTONIC
je 0f
cghi %r2,-2 /* CLOCK_THREAD_CPUTIME_ID for this thread */
jne 2f
@@ -39,6 +39,6 @@
2: lghi %r1,__NR_clock_getres /* fallback to svc */
svc 0
br %r14
-3: .quad CLOCK_REALTIME_RES
+3: .quad __CLOCK_REALTIME_RES
.cfi_endproc
.size __kernel_clock_getres,.-__kernel_clock_getres
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index f404678..d46c95e 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -20,11 +20,11 @@
__kernel_clock_gettime:
.cfi_startproc
larl %r5,_vdso_data
- cghi %r2,CLOCK_REALTIME
+ cghi %r2,__CLOCK_REALTIME
je 4f
cghi %r2,-2 /* CLOCK_THREAD_CPUTIME_ID for this thread */
je 9f
- cghi %r2,CLOCK_MONOTONIC
+ cghi %r2,__CLOCK_MONOTONIC
jne 12f
/* CLOCK_MONOTONIC */
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 50cf963..bf61274a 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2802,6 +2802,73 @@
}
/*
+ * SNID - Sense Path Group ID
+ * This ioctl may be used in situations where I/O is stalled due to
+ * a reserve, so if the normal dasd_smalloc_request fails, we use the
+ * preallocated dasd_reserve_req.
+ */
+static int dasd_eckd_snid(struct dasd_device *device,
+ void __user *argp)
+{
+ struct dasd_ccw_req *cqr;
+ int rc;
+ struct ccw1 *ccw;
+ int useglobal;
+ struct dasd_snid_ioctl_data usrparm;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
+ return -EFAULT;
+
+ useglobal = 0;
+ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1,
+ sizeof(struct dasd_snid_data), device);
+ if (IS_ERR(cqr)) {
+ mutex_lock(&dasd_reserve_mutex);
+ useglobal = 1;
+ cqr = &dasd_reserve_req->cqr;
+ memset(cqr, 0, sizeof(*cqr));
+ memset(&dasd_reserve_req->ccw, 0,
+ sizeof(dasd_reserve_req->ccw));
+ cqr->cpaddr = &dasd_reserve_req->ccw;
+ cqr->data = &dasd_reserve_req->data;
+ cqr->magic = DASD_ECKD_MAGIC;
+ }
+ ccw = cqr->cpaddr;
+ ccw->cmd_code = DASD_ECKD_CCW_SNID;
+ ccw->flags |= CCW_FLAG_SLI;
+ ccw->count = 12;
+ ccw->cda = (__u32)(addr_t) cqr->data;
+ cqr->startdev = device;
+ cqr->memdev = device;
+ clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
+ set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
+ cqr->retries = 5;
+ cqr->expires = 10 * HZ;
+ cqr->buildclk = get_clock();
+ cqr->status = DASD_CQR_FILLED;
+ cqr->lpm = usrparm.path_mask;
+
+ rc = dasd_sleep_on_immediatly(cqr);
+ /* verify that I/O processing didn't modify the path mask */
+ if (!rc && usrparm.path_mask && (cqr->lpm != usrparm.path_mask))
+ rc = -EIO;
+ if (!rc) {
+ usrparm.data = *((struct dasd_snid_data *)cqr->data);
+ if (copy_to_user(argp, &usrparm, sizeof(usrparm)))
+ rc = -EFAULT;
+ }
+
+ if (useglobal)
+ mutex_unlock(&dasd_reserve_mutex);
+ else
+ dasd_sfree_request(cqr, cqr->memdev);
+ return rc;
+}
+
+/*
* Read performance statistics
*/
static int
@@ -3036,6 +3103,8 @@
return dasd_eckd_reserve(device);
case BIODASDSLCK:
return dasd_eckd_steal_lock(device);
+ case BIODASDSNID:
+ return dasd_eckd_snid(device, argp);
case BIODASDSYMMIO:
return dasd_symm_io(device, argp);
default:
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index 0eb4965..12097c2 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -27,6 +27,7 @@
#define DASD_ECKD_CCW_WRITE_CKD 0x1d
#define DASD_ECKD_CCW_READ_CKD 0x1e
#define DASD_ECKD_CCW_PSF 0x27
+#define DASD_ECKD_CCW_SNID 0x34
#define DASD_ECKD_CCW_RSSD 0x3e
#define DASD_ECKD_CCW_LOCATE_RECORD 0x47
#define DASD_ECKD_CCW_SNSS 0x54
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 29c2d73..6c40867 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -1077,15 +1077,14 @@
/* FIXME: What to do with the request? */
switch (PTR_ERR(irb)) {
case -ETIMEDOUT:
- DBF_LH(1, "(%s): Request timed out\n",
- dev_name(&cdev->dev));
+ DBF_LH(1, "(%08x): Request timed out\n",
+ device->cdev_id);
case -EIO:
__tape_end_request(device, request, -EIO);
break;
default:
- DBF_LH(1, "(%s): Unexpected i/o error %li\n",
- dev_name(&cdev->dev),
- PTR_ERR(irb));
+ DBF_LH(1, "(%08x): Unexpected i/o error %li\n",
+ device->cdev_id, PTR_ERR(irb));
}
return;
}
diff --git a/drivers/s390/char/tape_std.c b/drivers/s390/char/tape_std.c
index 03f07e5..3c3f342 100644
--- a/drivers/s390/char/tape_std.c
+++ b/drivers/s390/char/tape_std.c
@@ -47,8 +47,8 @@
device->cdev_id);
rc = tape_cancel_io(device, request);
if(rc)
- DBF_EVENT(3, "(%s): Assign timeout: Cancel failed with rc = %i\n",
- dev_name(&device->cdev->dev), rc);
+ DBF_EVENT(3, "(%08x): Assign timeout: Cancel failed with rc = "
+ "%i\n", device->cdev_id, rc);
}
int