| /* |
| * Keymile KMETER1 Device Tree Source |
| * |
| * 2008 DENX Software Engineering GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "KMETER1"; |
| compatible = "keymile,KMETER1"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet_piggy2; |
| ethernet1 = &enet_estar1; |
| ethernet2 = &enet_estar2; |
| ethernet3 = &enet_eth1; |
| ethernet4 = &enet_eth2; |
| ethernet5 = &enet_eth3; |
| ethernet6 = &enet_eth4; |
| serial0 = &serial0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8360@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| d-cache-line-size = <32>; // 32 bytes |
| i-cache-line-size = <32>; // 32 bytes |
| d-cache-size = <32768>; // L1, 32K |
| i-cache-size = <32768>; // L1, 32K |
| timebase-frequency = <0>; /* Filled in by U-Boot */ |
| bus-frequency = <0>; /* Filled in by U-Boot */ |
| clock-frequency = <0>; /* Filled in by U-Boot */ |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0 0>; /* Filled in by U-Boot */ |
| }; |
| |
| soc8360@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,mpc8360-immr", "simple-bus"; |
| ranges = <0x0 0xe0000000 0x00200000>; |
| reg = <0xe0000000 0x00000200>; |
| bus-frequency = <0>; /* Filled in by U-Boot */ |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <14 0x8>; |
| interrupt-parent = <&ipic>; |
| dfsrr; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <264000000>; |
| interrupts = <9 0x8>; |
| interrupt-parent = <&ipic>; |
| }; |
| |
| dma@82a8 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; |
| reg = <0x82a8 4>; |
| ranges = <0 0x8100 0x1a8>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0 0x80>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x80 0x80>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x100 0x80>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; |
| reg = <0x180 0x28>; |
| interrupt-parent = <&ipic>; |
| interrupts = <71 8>; |
| }; |
| }; |
| |
| ipic: pic@700 { |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| compatible = "fsl,pq2pro-pic", "fsl,ipic"; |
| interrupt-controller; |
| reg = <0x700 0x100>; |
| }; |
| |
| par_io@1400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x1400 0x100>; |
| compatible = "fsl,mpc8360-par_io"; |
| num-ports = <7>; |
| |
| pio_ucc1: ucc_pin@0 { |
| reg = <0>; |
| |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 1 3 0 2 0 /* MDIO */ |
| 0 2 1 0 1 0 /* MDC */ |
| |
| 0 3 1 0 1 0 /* TxD0 */ |
| 0 4 1 0 1 0 /* TxD1 */ |
| 0 5 1 0 1 0 /* TxD2 */ |
| 0 6 1 0 1 0 /* TxD3 */ |
| 0 9 2 0 1 0 /* RxD0 */ |
| 0 10 2 0 1 0 /* RxD1 */ |
| 0 11 2 0 1 0 /* RxD2 */ |
| 0 12 2 0 1 0 /* RxD3 */ |
| 0 7 1 0 1 0 /* TX_EN */ |
| 0 8 1 0 1 0 /* TX_ER */ |
| 0 15 2 0 1 0 /* RX_DV */ |
| 0 16 2 0 1 0 /* RX_ER */ |
| 0 0 2 0 1 0 /* RX_CLK */ |
| 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ |
| 2 8 2 0 1 0 /* GTX125 - CLK9 */ |
| >; |
| }; |
| |
| pio_ucc2: ucc_pin@1 { |
| reg = <1>; |
| |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 1 3 0 2 0 /* MDIO */ |
| 0 2 1 0 1 0 /* MDC */ |
| |
| 0 17 1 0 1 0 /* TxD0 */ |
| 0 18 1 0 1 0 /* TxD1 */ |
| 0 19 1 0 1 0 /* TxD2 */ |
| 0 20 1 0 1 0 /* TxD3 */ |
| 0 23 2 0 1 0 /* RxD0 */ |
| 0 24 2 0 1 0 /* RxD1 */ |
| 0 25 2 0 1 0 /* RxD2 */ |
| 0 26 2 0 1 0 /* RxD3 */ |
| 0 21 1 0 1 0 /* TX_EN */ |
| 0 22 1 0 1 0 /* TX_ER */ |
| 0 29 2 0 1 0 /* RX_DV */ |
| 0 30 2 0 1 0 /* RX_ER */ |
| 0 31 2 0 1 0 /* RX_CLK */ |
| 2 2 1 0 2 0 /* GTX_CLK - CLK3 */ |
| 2 3 2 0 1 0 /* GTX125 - CLK4 */ |
| >; |
| }; |
| |
| pio_ucc4: ucc_pin@3 { |
| reg = <3>; |
| |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 1 3 0 2 0 /* MDIO */ |
| 0 2 1 0 1 0 /* MDC */ |
| |
| 1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */ |
| 1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */ |
| 1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */ |
| 1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */ |
| 1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */ |
| 1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */ |
| 1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */ |
| |
| 2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */ |
| >; |
| }; |
| |
| pio_ucc5: ucc_pin@4 { |
| reg = <4>; |
| |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 1 3 0 2 0 /* MDIO */ |
| 0 2 1 0 1 0 /* MDC */ |
| |
| 3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */ |
| 3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */ |
| 3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */ |
| 3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */ |
| 3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */ |
| 3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */ |
| 3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */ |
| >; |
| }; |
| |
| pio_ucc6: ucc_pin@5 { |
| reg = <5>; |
| |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 1 3 0 2 0 /* MDIO */ |
| 0 2 1 0 1 0 /* MDC */ |
| |
| 3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */ |
| 3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */ |
| 3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */ |
| 3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */ |
| 3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */ |
| 3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */ |
| 3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */ |
| >; |
| }; |
| |
| pio_ucc7: ucc_pin@6 { |
| reg = <6>; |
| |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 1 3 0 2 0 /* MDIO */ |
| 0 2 1 0 1 0 /* MDC */ |
| |
| 4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */ |
| 4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */ |
| 4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */ |
| 4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */ |
| 4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */ |
| 4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */ |
| 4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */ |
| >; |
| }; |
| |
| pio_ucc8: ucc_pin@7 { |
| reg = <7>; |
| |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 1 3 0 2 0 /* MDIO */ |
| 0 2 1 0 1 0 /* MDC */ |
| |
| 4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */ |
| 4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */ |
| 4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */ |
| 4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */ |
| 4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */ |
| 4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */ |
| 4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */ |
| |
| 2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */ |
| >; |
| }; |
| |
| }; |
| |
| qe@100000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,qe"; |
| ranges = <0x0 0x100000 0x100000>; |
| reg = <0x100000 0x480>; |
| clock-frequency = <0>; /* Filled in by U-Boot */ |
| brg-frequency = <0>; /* Filled in by U-Boot */ |
| bus-frequency = <0>; /* Filled in by U-Boot */ |
| |
| muram@10000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| ranges = <0x0 0x00010000 0x0000c000>; |
| |
| data-only@0 { |
| compatible = "fsl,qe-muram-data", |
| "fsl,cpm-muram-data"; |
| reg = <0x0 0xc000>; |
| }; |
| }; |
| |
| /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ |
| enet_estar1: ucc@2000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <1>; |
| reg = <0x2000 0x200>; |
| interrupts = <32>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk9"; |
| phy-handle = <&phy_estar1>; |
| phy-connection-type = "rgmii-id"; |
| pio-handle = <&pio_ucc1>; |
| }; |
| |
| /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ |
| enet_estar2: ucc@3000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <2>; |
| reg = <0x3000 0x200>; |
| interrupts = <33>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk4"; |
| phy-handle = <&phy_estar2>; |
| phy-connection-type = "rgmii-id"; |
| pio-handle = <&pio_ucc2>; |
| }; |
| |
| /* Piggy2 (UCC4, MDIO 0x00, RMII) */ |
| enet_piggy2: ucc@3200 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <4>; |
| reg = <0x3200 0x200>; |
| interrupts = <35>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk17"; |
| phy-handle = <&phy_piggy2>; |
| phy-connection-type = "rmii"; |
| pio-handle = <&pio_ucc4>; |
| }; |
| |
| /* Eth-1 (UCC5, MDIO 0x08, RMII) */ |
| enet_eth1: ucc@2400 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <5>; |
| reg = <0x2400 0x200>; |
| interrupts = <40>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| phy-handle = <&phy_eth1>; |
| phy-connection-type = "rmii"; |
| pio-handle = <&pio_ucc5>; |
| }; |
| |
| /* Eth-2 (UCC6, MDIO 0x09, RMII) */ |
| enet_eth2: ucc@3400 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <6>; |
| reg = <0x3400 0x200>; |
| interrupts = <41>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| phy-handle = <&phy_eth2>; |
| phy-connection-type = "rmii"; |
| pio-handle = <&pio_ucc6>; |
| }; |
| |
| /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ |
| enet_eth3: ucc@2600 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <7>; |
| reg = <0x2600 0x200>; |
| interrupts = <42>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| phy-handle = <&phy_eth3>; |
| phy-connection-type = "rmii"; |
| pio-handle = <&pio_ucc7>; |
| }; |
| |
| /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ |
| enet_eth4: ucc@3600 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <8>; |
| reg = <0x3600 0x200>; |
| interrupts = <43>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| phy-handle = <&phy_eth4>; |
| phy-connection-type = "rmii"; |
| pio-handle = <&pio_ucc8>; |
| }; |
| |
| mdio@3320 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x3320 0x18>; |
| compatible = "fsl,ucc-mdio"; |
| |
| /* Piggy2 (UCC4, MDIO 0x00, RMII) */ |
| phy_piggy2: ethernet-phy@00 { |
| reg = <0x0>; |
| }; |
| |
| /* Eth-1 (UCC5, MDIO 0x08, RMII) */ |
| phy_eth1: ethernet-phy@08 { |
| reg = <0x08>; |
| }; |
| |
| /* Eth-2 (UCC6, MDIO 0x09, RMII) */ |
| phy_eth2: ethernet-phy@09 { |
| reg = <0x09>; |
| }; |
| |
| /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ |
| phy_eth3: ethernet-phy@0a { |
| reg = <0x0a>; |
| }; |
| |
| /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ |
| phy_eth4: ethernet-phy@0b { |
| reg = <0x0b>; |
| }; |
| |
| /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ |
| phy_estar1: ethernet-phy@10 { |
| interrupt-parent = <&ipic>; |
| interrupts = <17 0x8>; |
| reg = <0x10>; |
| }; |
| |
| /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ |
| phy_estar2: ethernet-phy@11 { |
| interrupt-parent = <&ipic>; |
| interrupts = <18 0x8>; |
| reg = <0x11>; |
| }; |
| }; |
| |
| qeic: interrupt-controller@80 { |
| interrupt-controller; |
| compatible = "fsl,qe-ic"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| reg = <0x80 0x80>; |
| interrupts = <32 8 33 8>; |
| interrupt-parent = <&ipic>; |
| }; |
| }; |
| }; |
| |
| localbus@e0005000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", |
| "simple-bus"; |
| reg = <0xe0005000 0xd8>; |
| ranges = <0 0 0xf0000000 0x04000000>; /* Filled in by U-Boot */ |
| |
| flash@f0000000,0 { |
| compatible = "cfi-flash"; |
| /* |
| * The Intel P30 chip has 2 non-identical chips on |
| * one die, so we need to define 2 seperate regions |
| * that are scanned by physmap_of independantly. |
| */ |
| reg = <0 0x00000000 0x02000000 |
| 0 0x02000000 0x02000000>; /* Filled in by U-Boot */ |
| bank-width = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0 0x40000>; |
| }; |
| partition@40000 { |
| label = "env"; |
| reg = <0x40000 0x40000>; |
| }; |
| partition@80000 { |
| label = "dtb"; |
| reg = <0x80000 0x20000>; |
| }; |
| partition@a0000 { |
| label = "kernel"; |
| reg = <0xa0000 0x300000>; |
| }; |
| partition@3a0000 { |
| label = "ramdisk"; |
| reg = <0x3a0000 0x800000>; |
| }; |
| partition@ba0000 { |
| label = "user"; |
| reg = <0xba0000 0x3460000>; |
| }; |
| }; |
| }; |
| }; |