| /* |
| * Copyright (C) 2006 PA Semi, Inc |
| * |
| * Authors: Kip Walker, PA Semi |
| * Olof Johansson, PA Semi |
| * |
| * Maintained by: Olof Johansson <olof@lixom.net> |
| * |
| * Based on arch/powerpc/platforms/maple/setup.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/console.h> |
| #include <linux/pci.h> |
| |
| #include <asm/prom.h> |
| #include <asm/system.h> |
| #include <asm/iommu.h> |
| #include <asm/machdep.h> |
| #include <asm/mpic.h> |
| #include <asm/smp.h> |
| #include <asm/time.h> |
| |
| #include "pasemi.h" |
| |
| static void __iomem *reset_reg; |
| |
| static void pas_restart(char *cmd) |
| { |
| printk("Restarting...\n"); |
| while (1) |
| out_le32(reset_reg, 0x6000000); |
| } |
| |
| #ifdef CONFIG_SMP |
| struct smp_ops_t pas_smp_ops = { |
| .probe = smp_mpic_probe, |
| .message_pass = smp_mpic_message_pass, |
| .kick_cpu = smp_generic_kick_cpu, |
| .setup_cpu = smp_mpic_setup_cpu, |
| .give_timebase = smp_generic_give_timebase, |
| .take_timebase = smp_generic_take_timebase, |
| }; |
| #endif /* CONFIG_SMP */ |
| |
| void __init pas_setup_arch(void) |
| { |
| #ifdef CONFIG_SMP |
| /* Setup SMP callback */ |
| smp_ops = &pas_smp_ops; |
| #endif |
| /* no iommu yet */ |
| pci_dma_ops = &dma_direct_ops; |
| |
| /* Lookup PCI hosts */ |
| pas_pci_init(); |
| |
| #ifdef CONFIG_DUMMY_CONSOLE |
| conswitchp = &dummy_con; |
| #endif |
| |
| /* Remap SDC register for doing reset */ |
| /* XXXOJN This should maybe come out of the device tree */ |
| reset_reg = ioremap(0xfc101100, 4); |
| |
| pasemi_idle_init(); |
| } |
| |
| /* No legacy IO on our parts */ |
| static int pas_check_legacy_ioport(unsigned int baseport) |
| { |
| return -ENODEV; |
| } |
| |
| static __init void pas_init_IRQ(void) |
| { |
| struct device_node *np; |
| struct device_node *root, *mpic_node; |
| unsigned long openpic_addr; |
| const unsigned int *opprop; |
| int naddr, opplen; |
| struct mpic *mpic; |
| |
| mpic_node = NULL; |
| |
| for_each_node_by_type(np, "interrupt-controller") |
| if (device_is_compatible(np, "open-pic")) { |
| mpic_node = np; |
| break; |
| } |
| if (!mpic_node) |
| for_each_node_by_type(np, "open-pic") { |
| mpic_node = np; |
| break; |
| } |
| if (!mpic_node) { |
| printk(KERN_ERR |
| "Failed to locate the MPIC interrupt controller\n"); |
| return; |
| } |
| |
| /* Find address list in /platform-open-pic */ |
| root = of_find_node_by_path("/"); |
| naddr = prom_n_addr_cells(root); |
| opprop = get_property(root, "platform-open-pic", &opplen); |
| if (!opprop) { |
| printk(KERN_ERR "No platform-open-pic property.\n"); |
| of_node_put(root); |
| return; |
| } |
| openpic_addr = of_read_number(opprop, naddr); |
| printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); |
| |
| mpic = mpic_alloc(mpic_node, openpic_addr, |
| MPIC_PRIMARY|MPIC_LARGE_VECTORS, |
| 0, 0, " PAS-OPIC "); |
| BUG_ON(!mpic); |
| |
| mpic_assign_isu(mpic, 0, openpic_addr + 0x10000); |
| mpic_init(mpic); |
| of_node_put(mpic_node); |
| of_node_put(root); |
| } |
| |
| static void __init pas_progress(char *s, unsigned short hex) |
| { |
| printk("[%04x] : %s\n", hex, s ? s : ""); |
| } |
| |
| |
| static int pas_machine_check_handler(struct pt_regs *regs) |
| { |
| int cpu = smp_processor_id(); |
| unsigned long srr0, srr1, dsisr; |
| |
| srr0 = regs->nip; |
| srr1 = regs->msr; |
| dsisr = mfspr(SPRN_DSISR); |
| printk(KERN_ERR "Machine Check on CPU %d\n", cpu); |
| printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); |
| printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); |
| printk(KERN_ERR "Cause:\n"); |
| |
| if (srr1 & 0x200000) |
| printk(KERN_ERR "Signalled by SDC\n"); |
| if (srr1 & 0x100000) { |
| printk(KERN_ERR "Load/Store detected error:\n"); |
| if (dsisr & 0x8000) |
| printk(KERN_ERR "D-cache ECC double-bit error or bus error\n"); |
| if (dsisr & 0x4000) |
| printk(KERN_ERR "LSU snoop response error\n"); |
| if (dsisr & 0x2000) |
| printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n"); |
| if (dsisr & 0x1000) |
| printk(KERN_ERR "Recoverable Duptags\n"); |
| if (dsisr & 0x800) |
| printk(KERN_ERR "Recoverable D-cache parity error count overflow\n"); |
| if (dsisr & 0x400) |
| printk(KERN_ERR "TLB parity error count overflow\n"); |
| } |
| if (srr1 & 0x80000) |
| printk(KERN_ERR "Bus Error\n"); |
| if (srr1 & 0x40000) |
| printk(KERN_ERR "I-side SLB multiple hit\n"); |
| if (srr1 & 0x20000) |
| printk(KERN_ERR "I-cache parity error hit\n"); |
| |
| /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ |
| return !!(srr1 & 0x2); |
| } |
| |
| |
| /* |
| * Called very early, MMU is off, device-tree isn't unflattened |
| */ |
| static int __init pas_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| if (!of_flat_dt_is_compatible(root, "PA6T-1682M")) |
| return 0; |
| |
| hpte_init_native(); |
| |
| return 1; |
| } |
| |
| define_machine(pas) { |
| .name = "PA Semi PA6T-1682M", |
| .probe = pas_probe, |
| .setup_arch = pas_setup_arch, |
| .init_IRQ = pas_init_IRQ, |
| .get_irq = mpic_get_irq, |
| .restart = pas_restart, |
| .get_boot_time = pas_get_boot_time, |
| .calibrate_decr = generic_calibrate_decr, |
| .check_legacy_ioport = pas_check_legacy_ioport, |
| .progress = pas_progress, |
| .machine_check_exception = pas_machine_check_handler, |
| }; |