arch/arm/boot/dts/at91-sama5d2_xplained.dts - kernel/msm-4.19 - Gitiles

 /*
  * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
  *
  *  Copyright (C) 2015 Atmel,
  *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>

 / {
 	model = "Atmel SAMA5D2 Xplained";
 	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";

 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

 	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
 		};

 		main_xtal {
 			clock-frequency = <12000000>;
 		};
 	};

 	ahb {
 		usb0: gadget@00300000 {
 			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
 		};

 		usb1: ohci@00400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
 					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
 					   0
 					  >;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};

 		usb2: ehci@00500000 {
 			status = "okay";
 		};

 		sdmmc0: sdio-host@a0000000 {
 			bus-width = <8>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			non-removable;
 			mmc-ddr-1_8v;
 			status = "okay";
 		};

 		sdmmc1: sdio-host@b0000000 {
 			bus-width = <4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc1_default>;
 			status = "okay"; /* conflict with qspi0 */
 		};

 		apb {
 			spi0: spi@f8000000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0_default>;
 				status = "okay";

 				m25p80@0 {
 					compatible = "atmel,at25df321a";
 					reg = <0>;
 					spi-max-frequency = <50000000>;
 				};
 			};

 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";

 				ethernet-phy@1 {
 					reg = <0x1>;
 					interrupt-parent = <&pioA>;
 					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
 				};
 			};

 			pdmic@f8018000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_pdmic_default>;
 				atmel,model = "PDMIC @ sama5d2_xplained";
 				atmel,mic-min-freq = <1000000>;
 				atmel,mic-max-freq = <3246000>;
 				atmel,mic-offset = <0x0>;
 				status = "okay";
 			};

 			uart1: serial@f8020000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1_default>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "okay";
 			};

 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0_default>;
 				i2c-sda-hold-time-ns = <350>;
 				status = "okay";

 				pmic@5b {
 					compatible = "active-semi,act8945a";
 					reg = <0x5b>;
 					active-semi,vsel-high;
 					active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
 					active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
 					active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
 					active-semi,input-voltage-threshold-microvolt = <6600>;
 					active-semi,precondition-timeout = <40>;
 					active-semi,total-timeout = <3>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 					status = "okay";

 					regulators {
 						vdd_1v35_reg: REG_DCDC1 {
 							regulator-name = "VDD_1V35";
 							regulator-min-microvolt = <1350000>;
 							regulator-max-microvolt = <1350000>;
 							regulator-always-on;
 						};

 						vdd_1v2_reg: REG_DCDC2 {
 							regulator-name = "VDD_1V2";
 							regulator-min-microvolt = <1100000>;
 							regulator-max-microvolt = <1300000>;
 							regulator-always-on;
 						};

 						vdd_3v3_reg: REG_DCDC3 {
 							regulator-name = "VDD_3V3";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};

 						vdd_fuse_reg: REG_LDO1 {
 							regulator-name = "VDD_FUSE";
 							regulator-min-microvolt = <2500000>;
 							regulator-max-microvolt = <2500000>;
 							regulator-always-on;
 						};

 						vdd_3v3_lp_reg: REG_LDO2 {
 							regulator-name = "VDD_3V3_LP";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};

 						vdd_led_reg: REG_LDO3 {
 							regulator-name = "VDD_LED";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
 							regulator-always-on;
 						};

 						vdd_sdhc_1v8_reg: REG_LDO4 {
 							regulator-name = "VDD_SDHC_1V8";
 							regulator-min-microvolt = <1800000>;
 							regulator-max-microvolt = <1800000>;
 							regulator-always-on;
 						};
 					};
 				};
 			};

 			pwm0: pwm@f802c000 {
 				status = "okay";
 			};

 			flx0: flexcom@f8034000 {
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */

 				uart5: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&flx0_clk>;
 					clock-names = "usart";
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx0_default>;
 					atmel,fifo-size = <32>;
 					status = "okay";
 				};
 			};

 			shdwc@f8048010 {
 				atmel,shdwc-debouncer = <976>;
 				atmel,wakeup-rtc-timer;

 				input@0 {
 					reg = <0>;
 					atmel,wakeup-type = "low";
 				};
 			};

 			watchdog@f8048040 {
 				status = "okay";
 			};

 			can0: can@f8054000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_default>;
 				status = "okay";
 			};

 			uart3: serial@fc008000 {
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart3_default>;
 				status = "okay";
 			};

 			flx4: flexcom@fc018000 {
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 				status = "okay";

 				i2c2: i2c@600 {
 					compatible = "atmel,sama5d2-i2c";
 					reg = <0x600 0x200>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <0>, <0>;
 					dma-names = "tx", "rx";
 					#address-cells = <1>;
 					#size-cells = <0>;
 					clocks = <&flx4_clk>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx4_default>;
 					atmel,fifo-size = <16>;
 					status = "okay";
 				};
 			};

 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
 				status = "okay";

 				at24@54 {
 					compatible = "atmel,24c02";
 					reg = <0x54>;
 					pagesize = <16>;
 				};
 			};

 			adc: adc@fc030000 {
 				vddana-supply = <&vdd_3v3_lp_reg>;
 				vref-supply = <&vdd_3v3_lp_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_adc_default>;
 				status = "okay";
 			};

 			pinctrl@fc038000 {
 				/*
 				 * There is no real pinmux for ADC, if the pin
 				 * is not requested by another peripheral then
 				 * the muxing is done when channel is enabled.
 				 * Requesting pins for ADC is GPIO is
 				 * encouraged to prevent conflicts and to
 				 * disable bias in order to be in the same
 				 * state when the pin is not muxed to the adc.
 				 */
 				pinctrl_adc_default: adc_default {
 					pinmux = <PIN_PD23__GPIO>;
 					bias-disable;
 				};

 				pinctrl_can0_default: can0_default {
 					pinmux = <PIN_PC10__CANTX0>,
 						 <PIN_PC11__CANRX0>;
 					bias-disable;
 				};

 				pinctrl_can1_default: can1_default {
 					pinmux = <PIN_PC26__CANTX1>,
 						 <PIN_PC27__CANRX1>;
 					bias-disable;
 				};

 				pinctrl_charger_chglev: charger_chglev {
 					pinmux = <PIN_PA12__GPIO>;
 					bias-disable;
 				};

 				pinctrl_charger_irq: charger_irq {
 					pinmux = <PIN_PB13__GPIO>;
 					bias-disable;
 				};

 				pinctrl_charger_lbo: charger_lbo {
 					pinmux = <PIN_PC8__GPIO>;
 					bias-pull-up;
 				};

 				pinctrl_classd_default: classd_default {
 					pinmux = <PIN_PB1__CLASSD_R0>,
 						 <PIN_PB2__CLASSD_R1>,
 						 <PIN_PB3__CLASSD_R2>,
 						 <PIN_PB4__CLASSD_R3>;
 					bias-pull-up;
 				};

 				pinctrl_flx0_default: flx0_default {
 					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
 						 <PIN_PB29__FLEXCOM0_IO1>;
 					bias-disable;
 				};

 				pinctrl_flx4_default: flx4_default {
 					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
 						 <PIN_PD13__FLEXCOM4_IO1>;
 					bias-disable;
 				};

 				pinctrl_i2c0_default: i2c0_default {
 					pinmux = <PIN_PD21__TWD0>,
 						 <PIN_PD22__TWCK0>;
 					bias-disable;
 				};

 				pinctrl_i2c1_default: i2c1_default {
 					pinmux = <PIN_PD4__TWD1>,
 						 <PIN_PD5__TWCK1>;
 					bias-disable;
 				};

 				pinctrl_key_gpio_default: key_gpio_default {
 					pinmux = <PIN_PB9__GPIO>;
 					bias-pull-up;
 				};

 				pinctrl_led_gpio_default: led_gpio_default {
 					pinmux = <PIN_PB0__GPIO>,
 						 <PIN_PB5__GPIO>,
 						 <PIN_PB6__GPIO>;
 					bias-pull-up;
 				};

 				pinctrl_macb0_default: macb0_default {
 					pinmux = <PIN_PB14__GTXCK>,
 						 <PIN_PB15__GTXEN>,
 						 <PIN_PB16__GRXDV>,
 						 <PIN_PB17__GRXER>,
 						 <PIN_PB18__GRX0>,
 						 <PIN_PB19__GRX1>,
 						 <PIN_PB20__GTX0>,
 						 <PIN_PB21__GTX1>,
 						 <PIN_PB22__GMDC>,
 						 <PIN_PB23__GMDIO>;
 					bias-disable;
 				};

 				pinctrl_macb0_phy_irq: macb0_phy_irq {
 					pinmux = <PIN_PC9__GPIO>;
 					bias-disable;
 				};

 				pinctrl_pdmic_default: pdmic_default {
 					pinmux = <PIN_PB26__PDMIC_DAT>,
 						<PIN_PB27__PDMIC_CLK>;
 					bias-disable;
 				};

 				pinctrl_sdmmc0_default: sdmmc0_default {
 					cmd_data {
 						pinmux = <PIN_PA1__SDMMC0_CMD>,
 							 <PIN_PA2__SDMMC0_DAT0>,
 							 <PIN_PA3__SDMMC0_DAT1>,
 							 <PIN_PA4__SDMMC0_DAT2>,
 							 <PIN_PA5__SDMMC0_DAT3>,
 							 <PIN_PA6__SDMMC0_DAT4>,
 							 <PIN_PA7__SDMMC0_DAT5>,
 							 <PIN_PA8__SDMMC0_DAT6>,
 							 <PIN_PA9__SDMMC0_DAT7>;
 						bias-pull-up;
 					};

 					ck_cd_rstn_vddsel {
 						pinmux = <PIN_PA0__SDMMC0_CK>,
 							 <PIN_PA10__SDMMC0_RSTN>,
 							 <PIN_PA11__SDMMC0_VDDSEL>,
 							 <PIN_PA13__SDMMC0_CD>;
 						bias-disable;
 					};
 				};

 				pinctrl_sdmmc1_default: sdmmc1_default {
 					cmd_data {
 						pinmux = <PIN_PA28__SDMMC1_CMD>,
 							 <PIN_PA18__SDMMC1_DAT0>,
 							 <PIN_PA19__SDMMC1_DAT1>,
 							 <PIN_PA20__SDMMC1_DAT2>,
 							 <PIN_PA21__SDMMC1_DAT3>;
 						bias-pull-up;
 					};

 					conf-ck_cd {
 						pinmux = <PIN_PA22__SDMMC1_CK>,
 							 <PIN_PA30__SDMMC1_CD>;
 						bias-disable;
 					};
 				};

 				pinctrl_spi0_default: spi0_default {
 					pinmux = <PIN_PA14__SPI0_SPCK>,
 						 <PIN_PA15__SPI0_MOSI>,
 						 <PIN_PA16__SPI0_MISO>,
 						 <PIN_PA17__SPI0_NPCS0>;
 					bias-disable;
 				};

 				pinctrl_uart1_default: uart1_default {
 					pinmux = <PIN_PD2__URXD1>,
 						 <PIN_PD3__UTXD1>;
 					bias-disable;
 				};

 				pinctrl_uart3_default: uart3_default {
 					pinmux = <PIN_PB11__URXD3>,
 						 <PIN_PB12__UTXD3>;
 					bias-disable;
 				};

 				pinctrl_usb_default: usb_default {
 					pinmux = <PIN_PB10__GPIO>;
 					bias-disable;
 				};

 				pinctrl_usba_vbus: usba_vbus {
 					pinmux = <PIN_PA31__GPIO>;
 					bias-disable;
 				};

 			};

 			classd: classd@fc048000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_classd_default>;
 				atmel,pwm-type = "diff";
 				atmel,non-overlap-time = <10>;
 				status = "okay";
 			};

 			can1: can@fc050000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_default>;
 				status = "okay";
 			};
 		};
 	};

 	gpio_keys {
 		compatible = "gpio-keys";

 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;

 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
 		};
 	};

 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay";

 		red {
 			label = "red";
 			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
 		};


 		green {
 			label = "green";
 			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
 		};

 		blue {
 			label = "blue";
 			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 };
	/*
	* at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
	*
	* Copyright (C) 2015 Atmel,
	* 2015 Nicolas Ferre <nicolas.ferre@atmel.com>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/
	/dts-v1/;
	#include "sama5d2.dtsi"
	#include "sama5d2-pinfunc.h"
	#include <dt-bindings/mfd/atmel-flexcom.h>
	#include <dt-bindings/gpio/gpio.h>

	/ {
	model = "Atmel SAMA5D2 Xplained";
	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";

	chosen {
	stdout-path = "serial0:115200n8";
	};

	clocks {
	slow_xtal {
	clock-frequency = <32768>;
	};

	main_xtal {
	clock-frequency = <12000000>;
	};
	};

	ahb {
	usb0: gadget@00300000 {
	atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usba_vbus>;
	status = "okay";
	};

	usb1: ohci@00400000 {
	num-ports = <3>;
	atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
	&pioA PIN_PB10 GPIO_ACTIVE_HIGH
	0
	>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usb_default>;
	status = "okay";
	};

	usb2: ehci@00500000 {
	status = "okay";
	};

	sdmmc0: sdio-host@a0000000 {
	bus-width = <8>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sdmmc0_default>;
	non-removable;
	mmc-ddr-1_8v;
	status = "okay";
	};

	sdmmc1: sdio-host@b0000000 {
	bus-width = <4>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sdmmc1_default>;
	status = "okay"; /* conflict with qspi0 */
	};

	apb {
	spi0: spi@f8000000 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi0_default>;
	status = "okay";

	m25p80@0 {
	compatible = "atmel,at25df321a";
	reg = <0>;
	spi-max-frequency = <50000000>;
	};
	};

	macb0: ethernet@f8008000 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
	phy-mode = "rmii";
	status = "okay";

	ethernet-phy@1 {
	reg = <0x1>;
	interrupt-parent = <&pioA>;
	interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
	};
	};

	pdmic@f8018000 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pdmic_default>;
	atmel,model = "PDMIC @ sama5d2_xplained";
	atmel,mic-min-freq = <1000000>;
	atmel,mic-max-freq = <3246000>;
	atmel,mic-offset = <0x0>;
	status = "okay";
	};

	uart1: serial@f8020000 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1_default>;
	atmel,use-dma-rx;
	atmel,use-dma-tx;
	status = "okay";
	};

	i2c0: i2c@f8028000 {
	dmas = <0>, <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c0_default>;
	i2c-sda-hold-time-ns = <350>;
	status = "okay";

	pmic@5b {
	compatible = "active-semi,act8945a";
	reg = <0x5b>;
	active-semi,vsel-high;
	active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
	active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
	active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
	active-semi,input-voltage-threshold-microvolt = <6600>;
	active-semi,precondition-timeout = <40>;
	active-semi,total-timeout = <3>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
	status = "okay";

	regulators {
	vdd_1v35_reg: REG_DCDC1 {
	regulator-name = "VDD_1V35";
	regulator-min-microvolt = <1350000>;
	regulator-max-microvolt = <1350000>;
	regulator-always-on;
	};

	vdd_1v2_reg: REG_DCDC2 {
	regulator-name = "VDD_1V2";
	regulator-min-microvolt = <1100000>;
	regulator-max-microvolt = <1300000>;
	regulator-always-on;
	};

	vdd_3v3_reg: REG_DCDC3 {
	regulator-name = "VDD_3V3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	};

	vdd_fuse_reg: REG_LDO1 {
	regulator-name = "VDD_FUSE";
	regulator-min-microvolt = <2500000>;
	regulator-max-microvolt = <2500000>;
	regulator-always-on;
	};

	vdd_3v3_lp_reg: REG_LDO2 {
	regulator-name = "VDD_3V3_LP";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	};

	vdd_led_reg: REG_LDO3 {
	regulator-name = "VDD_LED";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	};

	vdd_sdhc_1v8_reg: REG_LDO4 {
	regulator-name = "VDD_SDHC_1V8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	};
	};
	};
	};

	pwm0: pwm@f802c000 {
	status = "okay";
	};

	flx0: flexcom@f8034000 {
	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
	status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */

	uart5: serial@200 {
	compatible = "atmel,at91sam9260-usart";
	reg = <0x200 0x200>;
	interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
	clocks = <&flx0_clk>;
	clock-names = "usart";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flx0_default>;
	atmel,fifo-size = <32>;
	status = "okay";
	};
	};

	shdwc@f8048010 {
	atmel,shdwc-debouncer = <976>;
	atmel,wakeup-rtc-timer;

	input@0 {
	reg = <0>;
	atmel,wakeup-type = "low";
	};
	};

	watchdog@f8048040 {
	status = "okay";
	};

	can0: can@f8054000 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can0_default>;
	status = "okay";
	};

	uart3: serial@fc008000 {
	atmel,use-dma-rx;
	atmel,use-dma-tx;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3_default>;
	status = "okay";
	};

	flx4: flexcom@fc018000 {
	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
	status = "okay";

	i2c2: i2c@600 {
	compatible = "atmel,sama5d2-i2c";
	reg = <0x600 0x200>;
	interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
	dmas = <0>, <0>;
	dma-names = "tx", "rx";
	#address-cells = <1>;
	#size-cells = <0>;
	clocks = <&flx4_clk>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flx4_default>;
	atmel,fifo-size = <16>;
	status = "okay";
	};
	};

	i2c1: i2c@fc028000 {
	dmas = <0>, <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1_default>;
	status = "okay";

	at24@54 {
	compatible = "atmel,24c02";
	reg = <0x54>;
	pagesize = <16>;
	};
	};

	adc: adc@fc030000 {
	vddana-supply = <&vdd_3v3_lp_reg>;
	vref-supply = <&vdd_3v3_lp_reg>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_adc_default>;
	status = "okay";
	};

	pinctrl@fc038000 {
	/*
	* There is no real pinmux for ADC, if the pin
	* is not requested by another peripheral then
	* the muxing is done when channel is enabled.
	* Requesting pins for ADC is GPIO is
	* encouraged to prevent conflicts and to
	* disable bias in order to be in the same
	* state when the pin is not muxed to the adc.
	*/
	pinctrl_adc_default: adc_default {
	pinmux = <PIN_PD23__GPIO>;
	bias-disable;
	};

	pinctrl_can0_default: can0_default {
	pinmux = <PIN_PC10__CANTX0>,
	<PIN_PC11__CANRX0>;
	bias-disable;
	};

	pinctrl_can1_default: can1_default {
	pinmux = <PIN_PC26__CANTX1>,
	<PIN_PC27__CANRX1>;
	bias-disable;
	};

	pinctrl_charger_chglev: charger_chglev {
	pinmux = <PIN_PA12__GPIO>;
	bias-disable;
	};

	pinctrl_charger_irq: charger_irq {
	pinmux = <PIN_PB13__GPIO>;
	bias-disable;
	};

	pinctrl_charger_lbo: charger_lbo {
	pinmux = <PIN_PC8__GPIO>;
	bias-pull-up;
	};

	pinctrl_classd_default: classd_default {
	pinmux = <PIN_PB1__CLASSD_R0>,
	<PIN_PB2__CLASSD_R1>,
	<PIN_PB3__CLASSD_R2>,
	<PIN_PB4__CLASSD_R3>;
	bias-pull-up;
	};

	pinctrl_flx0_default: flx0_default {
	pinmux = <PIN_PB28__FLEXCOM0_IO0>,
	<PIN_PB29__FLEXCOM0_IO1>;
	bias-disable;
	};

	pinctrl_flx4_default: flx4_default {
	pinmux = <PIN_PD12__FLEXCOM4_IO0>,
	<PIN_PD13__FLEXCOM4_IO1>;
	bias-disable;
	};

	pinctrl_i2c0_default: i2c0_default {
	pinmux = <PIN_PD21__TWD0>,
	<PIN_PD22__TWCK0>;
	bias-disable;
	};

	pinctrl_i2c1_default: i2c1_default {
	pinmux = <PIN_PD4__TWD1>,
	<PIN_PD5__TWCK1>;
	bias-disable;
	};

	pinctrl_key_gpio_default: key_gpio_default {
	pinmux = <PIN_PB9__GPIO>;
	bias-pull-up;
	};

	pinctrl_led_gpio_default: led_gpio_default {
	pinmux = <PIN_PB0__GPIO>,
	<PIN_PB5__GPIO>,
	<PIN_PB6__GPIO>;
	bias-pull-up;
	};

	pinctrl_macb0_default: macb0_default {
	pinmux = <PIN_PB14__GTXCK>,
	<PIN_PB15__GTXEN>,
	<PIN_PB16__GRXDV>,
	<PIN_PB17__GRXER>,
	<PIN_PB18__GRX0>,
	<PIN_PB19__GRX1>,
	<PIN_PB20__GTX0>,
	<PIN_PB21__GTX1>,
	<PIN_PB22__GMDC>,
	<PIN_PB23__GMDIO>;
	bias-disable;
	};

	pinctrl_macb0_phy_irq: macb0_phy_irq {
	pinmux = <PIN_PC9__GPIO>;
	bias-disable;
	};

	pinctrl_pdmic_default: pdmic_default {
	pinmux = <PIN_PB26__PDMIC_DAT>,
	<PIN_PB27__PDMIC_CLK>;
	bias-disable;
	};

	pinctrl_sdmmc0_default: sdmmc0_default {
	cmd_data {
	pinmux = <PIN_PA1__SDMMC0_CMD>,
	<PIN_PA2__SDMMC0_DAT0>,
	<PIN_PA3__SDMMC0_DAT1>,
	<PIN_PA4__SDMMC0_DAT2>,
	<PIN_PA5__SDMMC0_DAT3>,
	<PIN_PA6__SDMMC0_DAT4>,
	<PIN_PA7__SDMMC0_DAT5>,
	<PIN_PA8__SDMMC0_DAT6>,
	<PIN_PA9__SDMMC0_DAT7>;
	bias-pull-up;
	};

	ck_cd_rstn_vddsel {
	pinmux = <PIN_PA0__SDMMC0_CK>,
	<PIN_PA10__SDMMC0_RSTN>,
	<PIN_PA11__SDMMC0_VDDSEL>,
	<PIN_PA13__SDMMC0_CD>;
	bias-disable;
	};
	};

	pinctrl_sdmmc1_default: sdmmc1_default {
	cmd_data {
	pinmux = <PIN_PA28__SDMMC1_CMD>,
	<PIN_PA18__SDMMC1_DAT0>,
	<PIN_PA19__SDMMC1_DAT1>,
	<PIN_PA20__SDMMC1_DAT2>,
	<PIN_PA21__SDMMC1_DAT3>;
	bias-pull-up;
	};

	conf-ck_cd {
	pinmux = <PIN_PA22__SDMMC1_CK>,
	<PIN_PA30__SDMMC1_CD>;
	bias-disable;
	};
	};

	pinctrl_spi0_default: spi0_default {
	pinmux = <PIN_PA14__SPI0_SPCK>,
	<PIN_PA15__SPI0_MOSI>,
	<PIN_PA16__SPI0_MISO>,
	<PIN_PA17__SPI0_NPCS0>;
	bias-disable;
	};

	pinctrl_uart1_default: uart1_default {
	pinmux = <PIN_PD2__URXD1>,
	<PIN_PD3__UTXD1>;
	bias-disable;
	};

	pinctrl_uart3_default: uart3_default {
	pinmux = <PIN_PB11__URXD3>,
	<PIN_PB12__UTXD3>;
	bias-disable;
	};

	pinctrl_usb_default: usb_default {
	pinmux = <PIN_PB10__GPIO>;
	bias-disable;
	};

	pinctrl_usba_vbus: usba_vbus {
	pinmux = <PIN_PA31__GPIO>;
	bias-disable;
	};

	};

	classd: classd@fc048000 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_classd_default>;
	atmel,pwm-type = "diff";
	atmel,non-overlap-time = <10>;
	status = "okay";
	};

	can1: can@fc050000 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can1_default>;
	status = "okay";
	};
	};
	};

	gpio_keys {
	compatible = "gpio-keys";

	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_key_gpio_default>;

	bp1 {
	label = "PB_USER";
	gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
	linux,code = <0x104>;
	};
	};

	leds {
	compatible = "gpio-leds";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_led_gpio_default>;
	status = "okay";

	red {
	label = "red";
	gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
	};


	green {
	label = "green";
	gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
	};

	blue {
	label = "blue";
	gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "heartbeat";
	};
	};
	};