pinctrl: exynos: add exynos5250 SoC specific data
Add Samsung Exynos5250 SoC specific data to enable pinctrl support for
all platforms based on Exynos5250.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 538b9dd..8738933 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -677,3 +677,111 @@
.label = "exynos4x12-gpio-ctrl3",
},
};
+
+/* pin banks of exynos5250 pin-controller 0 */
+static struct samsung_pin_bank exynos5250_pin_banks0[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
+ EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
+ EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20),
+ EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24),
+ EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28),
+ EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30),
+ EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34),
+ EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"),
+ EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"),
+ EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
+};
+
+/* pin banks of exynos5250 pin-controller 1 */
+static struct samsung_pin_bank exynos5250_pin_banks1[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08),
+ EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
+ EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20),
+};
+
+/* pin banks of exynos5250 pin-controller 2 */
+static struct samsung_pin_bank exynos5250_pin_banks2[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
+ EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
+};
+
+/* pin banks of exynos5250 pin-controller 3 */
+static struct samsung_pin_bank exynos5250_pin_banks3[] = {
+ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes
+ * four gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
+ {
+ /* pin-controller instance 0 data */
+ .pin_banks = exynos5250_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks0),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .weint_con = EXYNOS_WKUP_ECON_OFFSET,
+ .weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
+ .weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .label = "exynos5250-gpio-ctrl0",
+ }, {
+ /* pin-controller instance 1 data */
+ .pin_banks = exynos5250_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks1),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl1",
+ }, {
+ /* pin-controller instance 2 data */
+ .pin_banks = exynos5250_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks2),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl2",
+ }, {
+ /* pin-controller instance 3 data */
+ .pin_banks = exynos5250_pin_banks3,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks3),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl3",
+ },
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index f206df1..3d5cf63 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -948,6 +948,8 @@
.data = (void *)exynos4210_pin_ctrl },
{ .compatible = "samsung,exynos4x12-pinctrl",
.data = (void *)exynos4x12_pin_ctrl },
+ { .compatible = "samsung,exynos5250-pinctrl",
+ .data = (void *)exynos5250_pin_ctrl },
{},
};
MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index e2d4e67..ee964aa 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -237,5 +237,6 @@
/* list of all exported SoC specific data */
extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
#endif /* __PINCTRL_SAMSUNG_H */