ACPICA: Standardize integer output for ACPICA warnings/errors
Always use 0x prefix for hex output, use %u for integer output
(all integers are unsigned.)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c
index bb13817..347bee1 100644
--- a/drivers/acpi/acpica/dsfield.c
+++ b/drivers/acpi/acpica/dsfield.c
@@ -323,7 +323,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Invalid opcode in field list: %X",
+ "Invalid opcode in field list: 0x%X",
arg->common.aml_opcode));
return_ACPI_STATUS(AE_AML_BAD_OPCODE);
}
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index 7210392..2a9a561 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -225,7 +225,7 @@
(walk_state->thread->current_sync_level >
obj_desc->method.mutex->mutex.sync_level)) {
ACPI_ERROR((AE_INFO,
- "Cannot acquire Mutex for method [%4.4s], current SyncLevel is too large (%d)",
+ "Cannot acquire Mutex for method [%4.4s], current SyncLevel is too large (%u)",
acpi_ut_get_node_name(method_node),
walk_state->thread->current_sync_level));
diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c
index cc343b9..f3d52f5 100644
--- a/drivers/acpi/acpica/dsmthdat.c
+++ b/drivers/acpi/acpica/dsmthdat.c
@@ -262,7 +262,7 @@
if (index > ACPI_METHOD_MAX_LOCAL) {
ACPI_ERROR((AE_INFO,
- "Local index %d is invalid (max %d)",
+ "Local index %u is invalid (max %u)",
index, ACPI_METHOD_MAX_LOCAL));
return_ACPI_STATUS(AE_AML_INVALID_INDEX);
}
@@ -276,7 +276,7 @@
if (index > ACPI_METHOD_MAX_ARG) {
ACPI_ERROR((AE_INFO,
- "Arg index %d is invalid (max %d)",
+ "Arg index %u is invalid (max %u)",
index, ACPI_METHOD_MAX_ARG));
return_ACPI_STATUS(AE_AML_INVALID_INDEX);
}
@@ -287,7 +287,7 @@
break;
default:
- ACPI_ERROR((AE_INFO, "Type %d is invalid", type));
+ ACPI_ERROR((AE_INFO, "Type %u is invalid", type));
return_ACPI_STATUS(AE_TYPE);
}
@@ -424,7 +424,7 @@
case ACPI_REFCLASS_ARG:
ACPI_ERROR((AE_INFO,
- "Uninitialized Arg[%d] at node %p",
+ "Uninitialized Arg[%u] at node %p",
index, node));
return_ACPI_STATUS(AE_AML_UNINITIALIZED_ARG);
@@ -440,7 +440,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Not a Arg/Local opcode: %X",
+ "Not a Arg/Local opcode: 0x%X",
type));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index 891e08b..3607adc 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -288,7 +288,7 @@
if (byte_list) {
if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
ACPI_ERROR((AE_INFO,
- "Expecting bytelist, got AML opcode %X in op %p",
+ "Expecting bytelist, found AML opcode 0x%X in op %p",
byte_list->common.aml_opcode, byte_list));
acpi_ut_remove_reference(obj_desc);
@@ -511,7 +511,7 @@
}
ACPI_INFO((AE_INFO,
- "Actual Package length (0x%X) is larger than NumElements field (0x%X), truncated\n",
+ "Actual Package length (%u) is larger than NumElements field (%u), truncated\n",
i, element_count));
} else if (i < element_count) {
/*
@@ -519,7 +519,7 @@
* Note: this is not an error, the package is padded out with NULLs.
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Package List length (0x%X) smaller than NumElements count (0x%X), padded with null elements\n",
+ "Package List length (%u) smaller than NumElements count (%u), padded with null elements\n",
i, element_count));
}
@@ -701,7 +701,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown constant opcode %X",
+ "Unknown constant opcode 0x%X",
opcode));
status = AE_AML_OPERAND_TYPE;
break;
@@ -717,7 +717,7 @@
break;
default:
- ACPI_ERROR((AE_INFO, "Unknown Integer type %X",
+ ACPI_ERROR((AE_INFO, "Unknown Integer type 0x%X",
op_info->type));
status = AE_AML_OPERAND_TYPE;
break;
@@ -806,7 +806,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unimplemented reference type for AML opcode: %4.4X",
+ "Unimplemented reference type for AML opcode: 0x%4.4X",
opcode));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
@@ -816,7 +816,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unimplemented data type: %X",
+ ACPI_ERROR((AE_INFO, "Unimplemented data type: 0x%X",
obj_desc->common.type));
status = AE_AML_OPERAND_TYPE;
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index bf980ca..53a7e41 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -292,7 +292,7 @@
node = obj_desc->buffer.node;
if (!node) {
ACPI_ERROR((AE_INFO,
- "No pointer back to NS node in buffer obj %p",
+ "No pointer back to namespace node in buffer object %p",
obj_desc));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -336,7 +336,7 @@
node = obj_desc->package.node;
if (!node) {
ACPI_ERROR((AE_INFO,
- "No pointer back to NS node in package %p",
+ "No pointer back to namespace node in package %p",
obj_desc));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -580,7 +580,8 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown field creation opcode %02x", aml_opcode));
+ "Unknown field creation opcode 0x%02X",
+ aml_opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
@@ -589,7 +590,7 @@
if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
ACPI_ERROR((AE_INFO,
- "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)",
+ "Field [%4.4s] at %u exceeds Buffer [%4.4s] size %u (bits)",
acpi_ut_get_node_name(result_desc),
bit_offset + bit_count,
acpi_ut_get_node_name(buffer_desc->buffer.node),
@@ -693,7 +694,7 @@
status = acpi_ex_resolve_operands(op->common.aml_opcode,
ACPI_WALK_OPERANDS, walk_state);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)",
+ ACPI_ERROR((AE_INFO, "(%s) bad operand(s), status 0x%X",
acpi_ps_get_opcode_name(op->common.aml_opcode),
status));
@@ -1461,7 +1462,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown control opcode=%X Op=%p",
+ ACPI_ERROR((AE_INFO, "Unknown control opcode=0x%X Op=%p",
op->common.aml_opcode, op));
status = AE_AML_BAD_OPCODE;
diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c
index 6b76c48..d555b37 100644
--- a/drivers/acpi/acpica/dswexec.c
+++ b/drivers/acpi/acpica/dswexec.c
@@ -140,7 +140,7 @@
if (local_obj_desc->common.type != ACPI_TYPE_INTEGER) {
ACPI_ERROR((AE_INFO,
- "Bad predicate (not an integer) ObjDesc=%p State=%p Type=%X",
+ "Bad predicate (not an integer) ObjDesc=%p State=%p Type=0x%X",
obj_desc, walk_state, obj_desc->common.type));
status = AE_AML_OPERAND_TYPE;
@@ -354,7 +354,7 @@
op_class = walk_state->op_info->class;
if (op_class == AML_CLASS_UNKNOWN) {
- ACPI_ERROR((AE_INFO, "Unknown opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown opcode 0x%X",
op->common.aml_opcode));
return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
}
@@ -678,7 +678,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p",
+ "Unimplemented opcode, class=0x%X type=0x%X Opcode=-0x%X Op=%p",
op_class, op_type, op->common.aml_opcode,
op));
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c
index 050df81..83155dd 100644
--- a/drivers/acpi/acpica/dswstate.c
+++ b/drivers/acpi/acpica/dswstate.c
@@ -179,7 +179,7 @@
if (!object) {
ACPI_ERROR((AE_INFO,
- "Null Object! Obj=%p State=%p Num=%X",
+ "Null Object! Obj=%p State=%p Num=%u",
object, walk_state, walk_state->result_count));
return (AE_BAD_PARAMETER);
}
@@ -223,7 +223,7 @@
if (((u32) walk_state->result_size + ACPI_RESULTS_FRAME_OBJ_NUM) >
ACPI_RESULTS_OBJ_NUM_MAX) {
- ACPI_ERROR((AE_INFO, "Result stack overflow: State=%p Num=%X",
+ ACPI_ERROR((AE_INFO, "Result stack overflow: State=%p Num=%u",
walk_state, walk_state->result_size));
return (AE_STACK_OVERFLOW);
}
@@ -314,7 +314,7 @@
if (walk_state->num_operands >= ACPI_OBJ_NUM_OPERANDS) {
ACPI_ERROR((AE_INFO,
- "Object stack overflow! Obj=%p State=%p #Ops=%X",
+ "Object stack overflow! Obj=%p State=%p #Ops=%u",
object, walk_state, walk_state->num_operands));
return (AE_STACK_OVERFLOW);
}
@@ -365,7 +365,7 @@
if (walk_state->num_operands == 0) {
ACPI_ERROR((AE_INFO,
- "Object stack underflow! Count=%X State=%p #Ops=%X",
+ "Object stack underflow! Count=%X State=%p #Ops=%u",
pop_count, walk_state,
walk_state->num_operands));
return (AE_STACK_UNDERFLOW);
@@ -377,7 +377,7 @@
walk_state->operands[walk_state->num_operands] = NULL;
}
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Count=%X State=%p #Ops=%X\n",
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Count=%X State=%p #Ops=%u\n",
pop_count, walk_state, walk_state->num_operands));
return (AE_OK);
diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c
index c1e6f47..f579591 100644
--- a/drivers/acpi/acpica/evevent.c
+++ b/drivers/acpi/acpica/evevent.c
@@ -302,7 +302,7 @@
ACPI_DISABLE_EVENT);
ACPI_ERROR((AE_INFO,
- "No installed handler for fixed event [%08X]",
+ "No installed handler for fixed event [0x%08X]",
event));
return (ACPI_INTERRUPT_NOT_HANDLED);
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 78c5550..b9d50ef 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -499,7 +499,7 @@
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to clear GPE[%2X]",
+ "Unable to clear GPE[0x%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
@@ -532,7 +532,7 @@
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to clear GPE[%2X]",
+ "Unable to clear GPE[0x%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
@@ -548,7 +548,7 @@
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to disable GPE[%2X]",
+ "Unable to disable GPE[0x%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
@@ -562,7 +562,7 @@
gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to queue handler for GPE[%2X] - event disabled",
+ "Unable to queue handler for GPE[0x%2X] - event disabled",
gpe_number));
}
break;
@@ -572,7 +572,7 @@
/* No handler or method to run! */
ACPI_ERROR((AE_INFO,
- "No handler or method for GPE[%2X], disabling event",
+ "No handler or method for GPE[0x%2X], disabling event",
gpe_number));
/*
@@ -582,7 +582,7 @@
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to disable GPE[%2X]",
+ "Unable to disable GPE[0x%2X]",
gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index fef7219..fa47e35 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -1139,8 +1139,8 @@
if ((register_count0) &&
(gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
ACPI_ERROR((AE_INFO,
- "GPE0 block (GPE 0 to %d) overlaps the GPE1 block "
- "(GPE %d to %d) - Ignoring GPE1",
+ "GPE0 block (GPE 0 to %u) overlaps the GPE1 block "
+ "(GPE %u to %u) - Ignoring GPE1",
gpe_number_max, acpi_gbl_FADT.gpe1_base,
acpi_gbl_FADT.gpe1_base +
((register_count1 *
diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c
index 9a3cb70..df0aea9 100644
--- a/drivers/acpi/acpica/evmisc.c
+++ b/drivers/acpi/acpica/evmisc.c
@@ -590,7 +590,7 @@
status = acpi_disable_event(i, 0);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO,
- "Could not disable fixed event %d",
+ "Could not disable fixed event %u",
(u32) i));
}
}
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index b407579..ca04823 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -142,7 +142,7 @@
if (ACPI_SUCCESS(status))
status = acpi_enable_event(event, 0);
if (ACPI_FAILURE(status)) {
- ACPI_WARNING((AE_INFO, "Could not enable fixed event %X",
+ ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X",
event));
/* Remove the handler */
@@ -203,7 +203,7 @@
if (ACPI_FAILURE(status)) {
ACPI_WARNING((AE_INFO,
- "Could not write to fixed event enable register %X",
+ "Could not write to fixed event enable register 0x%X",
event));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n",
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index bda7aed..b73bc50 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -650,7 +650,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Bad destination type during conversion: %X",
+ "Bad destination type during conversion: 0x%X",
destination_type));
status = AE_AML_INTERNAL;
break;
@@ -665,7 +665,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown Target type ID 0x%X AmlOpcode %X DestType %s",
+ "Unknown Target type ID 0x%X AmlOpcode 0x%X DestType %s",
GET_CURRENT_ARG_TYPE(walk_state->op_info->
runtime_args),
walk_state->opcode,
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index 0aa57d9..3c61b48 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -306,12 +306,12 @@
*/
if ((region_space >= ACPI_NUM_PREDEFINED_REGIONS) &&
(region_space < ACPI_USER_REGION_BEGIN)) {
- ACPI_ERROR((AE_INFO, "Invalid AddressSpace type %X",
+ ACPI_ERROR((AE_INFO, "Invalid AddressSpace type 0x%X",
region_space));
return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
}
- ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Region Type - %s (%X)\n",
+ ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Region Type - %s (0x%X)\n",
acpi_ut_get_region_name(region_space), region_space));
/* Create the region descriptor */
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index 6c79fec..f17d2ff 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -281,7 +281,7 @@
if (source_desc->buffer.length < length) {
ACPI_ERROR((AE_INFO,
- "SMBus or IPMI write requires Buffer of length %X, found length %X",
+ "SMBus or IPMI write requires Buffer of length %u, found length %u",
length, source_desc->buffer.length));
return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index f68a216..a6dc26f 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -94,7 +94,7 @@
/* We must have a valid region */
if (rgn_desc->common.type != ACPI_TYPE_REGION) {
- ACPI_ERROR((AE_INFO, "Needed Region, found type %X (%s)",
+ ACPI_ERROR((AE_INFO, "Needed Region, found type 0x%X (%s)",
rgn_desc->common.type,
acpi_ut_get_object_type_name(rgn_desc)));
@@ -175,7 +175,7 @@
* byte, and a field with Dword access specified.
*/
ACPI_ERROR((AE_INFO,
- "Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)",
+ "Field [%4.4s] access width (%u bytes) too large for region [%4.4s] (length %u)",
acpi_ut_get_node_name(obj_desc->
common_field.node),
obj_desc->common_field.access_byte_width,
@@ -189,7 +189,7 @@
* exceeds region length, indicate an error
*/
ACPI_ERROR((AE_INFO,
- "Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)",
+ "Field [%4.4s] Base+Offset+Width %u+%u+%u is beyond end of region [%4.4s] (length %u)",
acpi_ut_get_node_name(obj_desc->common_field.node),
obj_desc->common_field.base_byte_offset,
field_datum_byte_offset,
@@ -281,13 +281,13 @@
if (ACPI_FAILURE(status)) {
if (status == AE_NOT_IMPLEMENTED) {
ACPI_ERROR((AE_INFO,
- "Region %s(%X) not implemented",
+ "Region %s(0x%X) not implemented",
acpi_ut_get_region_name(rgn_desc->region.
space_id),
rgn_desc->region.space_id));
} else if (status == AE_NOT_EXIST) {
ACPI_ERROR((AE_INFO,
- "Region %s(%X) has no handler",
+ "Region %s(0x%X) has no handler",
acpi_ut_get_region_name(rgn_desc->region.
space_id),
rgn_desc->region.space_id));
@@ -525,7 +525,7 @@
default:
- ACPI_ERROR((AE_INFO, "Wrong object type in field I/O %X",
+ ACPI_ERROR((AE_INFO, "Wrong object type in field I/O %u",
obj_desc->common.type));
status = AE_AML_INTERNAL;
break;
@@ -630,7 +630,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown UpdateRule value: %X",
+ "Unknown UpdateRule value: 0x%X",
(obj_desc->common_field.
field_flags &
AML_FIELD_UPDATE_RULE_MASK)));
@@ -689,7 +689,7 @@
if (buffer_length <
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length)) {
ACPI_ERROR((AE_INFO,
- "Field size %X (bits) is too large for buffer (%X)",
+ "Field size %u (bits) is too large for buffer (%u)",
obj_desc->common_field.bit_length, buffer_length));
return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c
index c5bb1ee..95db4be0 100644
--- a/drivers/acpi/acpica/exmisc.c
+++ b/drivers/acpi/acpica/exmisc.c
@@ -99,7 +99,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown Reference Class %2.2X",
+ ACPI_ERROR((AE_INFO, "Unknown Reference Class 0x%2.2X",
obj_desc->reference.class));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -115,7 +115,7 @@
default:
- ACPI_ERROR((AE_INFO, "Invalid descriptor type %X",
+ ACPI_ERROR((AE_INFO, "Invalid descriptor type 0x%X",
ACPI_GET_DESCRIPTOR_TYPE(obj_desc)));
return_ACPI_STATUS(AE_TYPE);
}
@@ -276,7 +276,7 @@
break;
default:
- ACPI_ERROR((AE_INFO, "Invalid object type: %X",
+ ACPI_ERROR((AE_INFO, "Invalid object type: 0x%X",
operand0->common.type));
status = AE_AML_INTERNAL;
}
@@ -378,7 +378,7 @@
/* Invalid object type, should not happen here */
- ACPI_ERROR((AE_INFO, "Invalid object type: %X",
+ ACPI_ERROR((AE_INFO, "Invalid object type: 0x%X",
operand0->common.type));
status = AE_AML_INTERNAL;
goto cleanup;
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index 7116bc8..2b0d722 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -249,7 +249,7 @@
*/
if (walk_state->thread->current_sync_level > obj_desc->mutex.sync_level) {
ACPI_ERROR((AE_INFO,
- "Cannot acquire Mutex [%4.4s], current SyncLevel is too large (%d)",
+ "Cannot acquire Mutex [%4.4s], current SyncLevel is too large (%u)",
acpi_ut_get_node_name(obj_desc->mutex.node),
walk_state->thread->current_sync_level));
return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
@@ -410,7 +410,7 @@
if (obj_desc->mutex.sync_level !=
walk_state->thread->current_sync_level) {
ACPI_ERROR((AE_INFO,
- "Cannot release Mutex [%4.4s], SyncLevel mismatch: mutex %d current %d",
+ "Cannot release Mutex [%4.4s], SyncLevel mismatch: mutex %u current %u",
acpi_ut_get_node_name(obj_desc->mutex.node),
obj_desc->mutex.sync_level,
walk_state->thread->current_sync_level));
diff --git a/drivers/acpi/acpica/exnames.c b/drivers/acpi/acpica/exnames.c
index 679f308..d11e539 100644
--- a/drivers/acpi/acpica/exnames.c
+++ b/drivers/acpi/acpica/exnames.c
@@ -102,7 +102,7 @@
name_string = ACPI_ALLOCATE(size_needed);
if (!name_string) {
ACPI_ERROR((AE_INFO,
- "Could not allocate size %d", size_needed));
+ "Could not allocate size %u", size_needed));
return_PTR(NULL);
}
@@ -216,7 +216,7 @@
*/
status = AE_AML_BAD_NAME;
ACPI_ERROR((AE_INFO,
- "Bad character %02x in name, at %p",
+ "Bad character 0x%02x in name, at %p",
*aml_address, aml_address));
}
diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index 99adbab..38e0f3c 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -110,7 +110,7 @@
default: /* Unknown opcode */
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
@@ -189,7 +189,7 @@
default: /* Unknown opcode */
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
@@ -229,7 +229,7 @@
default: /* Unknown opcode */
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
@@ -399,7 +399,7 @@
if (digit > 0) {
ACPI_ERROR((AE_INFO,
- "Integer too large to convert to BCD: %8.8X%8.8X",
+ "Integer too large to convert to BCD: 0x%8.8X%8.8X",
ACPI_FORMAT_UINT64(operand[0]->
integer.value)));
status = AE_AML_NUMERIC_OVERFLOW;
@@ -540,7 +540,7 @@
default: /* Unknown opcode */
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
@@ -979,7 +979,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown Index TargetType %X in reference object %p",
+ "Unknown Index TargetType 0x%X in reference object %p",
operand[0]->reference.
target_type, operand[0]));
status = AE_AML_OPERAND_TYPE;
@@ -1007,7 +1007,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown class in reference(%p) - %2.2X",
+ "Unknown class in reference(%p) - 0x%2.2X",
operand[0],
operand[0]->reference.class));
@@ -1019,7 +1019,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c
index 22841bb..3f3f48b 100644
--- a/drivers/acpi/acpica/exoparg2.c
+++ b/drivers/acpi/acpica/exoparg2.c
@@ -159,7 +159,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
}
@@ -224,7 +224,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
@@ -441,7 +441,7 @@
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Index (%X%8.8X) is beyond end of object",
+ "Index (0x%8.8X%8.8X) is beyond end of object",
ACPI_FORMAT_UINT64(index)));
goto cleanup;
}
@@ -464,7 +464,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
@@ -572,7 +572,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c
index 8bb1012..7a08d23 100644
--- a/drivers/acpi/acpica/exoparg3.c
+++ b/drivers/acpi/acpica/exoparg3.c
@@ -119,7 +119,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
@@ -244,7 +244,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c
index f256b6a..4b50730 100644
--- a/drivers/acpi/acpica/exoparg6.c
+++ b/drivers/acpi/acpica/exoparg6.c
@@ -245,7 +245,7 @@
index = operand[5]->integer.value;
if (index >= operand[0]->package.count) {
ACPI_ERROR((AE_INFO,
- "Index (%X%8.8X) beyond package end (%X)",
+ "Index (0x%8.8X%8.8X) beyond package end (0x%X)",
ACPI_FORMAT_UINT64(index),
operand[0]->package.count));
status = AE_AML_PACKAGE_LIMIT;
@@ -314,7 +314,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X",
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index 2fbfe51..25059da 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -275,7 +275,7 @@
default:
/* Invalid field access type */
- ACPI_ERROR((AE_INFO, "Unknown field access type %X", access));
+ ACPI_ERROR((AE_INFO, "Unknown field access type 0x%X", access));
return_UINT32(0);
}
@@ -430,7 +430,7 @@
type = acpi_ns_get_type(info->region_node);
if (type != ACPI_TYPE_REGION) {
ACPI_ERROR((AE_INFO,
- "Needed Region, found type %X (%s)",
+ "Needed Region, found type 0x%X (%s)",
type, acpi_ut_get_type_name(type)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 486b2e5..a8703cc 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -105,7 +105,7 @@
break;
default:
- ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %d",
+ ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %u",
bit_width));
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
@@ -173,7 +173,7 @@
mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length);
if (!mem_info->mapped_logical_address) {
ACPI_ERROR((AE_INFO,
- "Could not map memory at %8.8X%8.8X, size %X",
+ "Could not map memory at 0x%8.8X%8.8X, size %u",
ACPI_FORMAT_NATIVE_UINT(address),
(u32) map_length));
mem_info->mapped_length = 0;
diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c
index fdc1b27..1fa4289 100644
--- a/drivers/acpi/acpica/exresnte.c
+++ b/drivers/acpi/acpica/exresnte.c
@@ -252,7 +252,7 @@
/* No named references are allowed here */
ACPI_ERROR((AE_INFO,
- "Unsupported Reference type %X",
+ "Unsupported Reference type 0x%X",
source_desc->reference.class));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
@@ -264,7 +264,7 @@
/* Default case is for unknown types */
ACPI_ERROR((AE_INFO,
- "Node %p - Unknown object type %X",
+ "Node %p - Unknown object type 0x%X",
node, entry_type));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c
index fdd6a70..7ca35ea 100644
--- a/drivers/acpi/acpica/exresolv.c
+++ b/drivers/acpi/acpica/exresolv.c
@@ -231,7 +231,7 @@
/* Invalid reference object */
ACPI_ERROR((AE_INFO,
- "Unknown TargetType %X in Index/Reference object %p",
+ "Unknown TargetType 0x%X in Index/Reference object %p",
stack_desc->reference.target_type,
stack_desc));
status = AE_AML_INTERNAL;
@@ -273,8 +273,8 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown Reference type %X in %p", ref_type,
- stack_desc));
+ "Unknown Reference type 0x%X in %p",
+ ref_type, stack_desc));
status = AE_AML_INTERNAL;
break;
}
@@ -403,7 +403,8 @@
if (ACPI_GET_DESCRIPTOR_TYPE(node) !=
ACPI_DESC_TYPE_NAMED) {
- ACPI_ERROR((AE_INFO, "Not a NS node %p [%s]",
+ ACPI_ERROR((AE_INFO,
+ "Not a namespace node %p [%s]",
node,
acpi_ut_get_descriptor_name(node)));
return_ACPI_STATUS(AE_AML_INTERNAL);
@@ -507,7 +508,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown Reference Class %2.2X",
+ "Unknown Reference Class 0x%2.2X",
obj_desc->reference.class));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c
index c5ecd61..8c97cfd 100644
--- a/drivers/acpi/acpica/exresop.c
+++ b/drivers/acpi/acpica/exresop.c
@@ -153,7 +153,7 @@
arg_types = op_info->runtime_args;
if (arg_types == ARGI_INVALID_OPCODE) {
- ACPI_ERROR((AE_INFO, "Unknown AML opcode %X", opcode));
+ ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X", opcode));
return_ACPI_STATUS(AE_AML_INTERNAL);
}
@@ -218,7 +218,7 @@
if (!acpi_ut_valid_object_type(object_type)) {
ACPI_ERROR((AE_INFO,
- "Bad operand object type [%X]",
+ "Bad operand object type [0x%X]",
object_type));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
@@ -253,7 +253,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown Reference Class %2.2X in %p",
+ "Unknown Reference Class 0x%2.2X in %p",
obj_desc->reference.class,
obj_desc));
@@ -665,7 +665,7 @@
/* Unknown type */
ACPI_ERROR((AE_INFO,
- "Internal - Unknown ARGI (required operand) type %X",
+ "Internal - Unknown ARGI (required operand) type 0x%X",
this_arg_type));
return_ACPI_STATUS(AE_BAD_PARAMETER);
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index f65d7e4..1624436 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -193,7 +193,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown Reference Class %2.2X",
+ ACPI_ERROR((AE_INFO, "Unknown Reference Class 0x%2.2X",
ref_desc->reference.class));
ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_INFO);
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index e11b6cb..c9513d5 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -170,7 +170,7 @@
* (ACPI specifies 100 usec as max, but this gives some slack in
* order to support existing BIOSs)
*/
- ACPI_ERROR((AE_INFO, "Time parameter is too large (%d)",
+ ACPI_ERROR((AE_INFO, "Time parameter is too large (%u)",
how_long));
status = AE_AML_OPERAND_VALUE;
} else {
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index ec7fc22..5d1273b 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -299,7 +299,7 @@
ACPI_FUNCTION_ENTRY();
if (register_id > ACPI_BITREG_MAX) {
- ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: %X",
+ ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: 0x%X",
register_id));
return (NULL);
}
@@ -413,7 +413,7 @@
break;
default:
- ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id));
+ ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id));
status = AE_BAD_PARAMETER;
break;
}
@@ -549,7 +549,7 @@
break;
default:
- ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id));
+ ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id));
status = AE_BAD_PARAMETER;
break;
}
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 5e6d4db..36eb803 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -245,7 +245,7 @@
if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
(acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
- ACPI_ERROR((AE_INFO, "Sleep values out of range: A=%X B=%X",
+ ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index e26c17d..c10d587 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -150,7 +150,7 @@
if (last_address > ACPI_UINT16_MAX) {
ACPI_ERROR((AE_INFO,
- "Illegal I/O port address/length above 64K: 0x%p/%X",
+ "Illegal I/O port address/length above 64K: %p/0x%X",
ACPI_CAST_PTR(void, address), byte_width));
return_ACPI_STATUS(AE_LIMIT);
}
diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c
index aa2b801..3a28146 100644
--- a/drivers/acpi/acpica/nsaccess.c
+++ b/drivers/acpi/acpica/nsaccess.c
@@ -222,7 +222,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unsupported initial type value %X",
+ "Unsupported initial type value 0x%X",
init_val->type));
acpi_ut_remove_reference(obj_desc);
obj_desc = NULL;
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index 0689d36..2110cc2 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -205,8 +205,8 @@
/* Check the node type and name */
if (type > ACPI_TYPE_LOCAL_MAX) {
- ACPI_WARNING((AE_INFO, "Invalid ACPI Object Type %08X",
- type));
+ ACPI_WARNING((AE_INFO,
+ "Invalid ACPI Object Type 0x%08X", type));
}
if (!acpi_ut_valid_acpi_name(this_node->name.integer)) {
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index 9593724..7dea003 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -107,7 +107,7 @@
if (index != 0) {
ACPI_ERROR((AE_INFO,
- "Could not construct external pathname; index=%X, size=%X, Path=%s",
+ "Could not construct external pathname; index=%u, size=%u, Path=%s",
(u32) index, (u32) size, &name_buffer[size]));
return (AE_BAD_PARAMETER);
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index 08f8b3f..a8e42b5 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -311,7 +311,7 @@
if (!node || !target_name || !return_node) {
ACPI_ERROR((AE_INFO,
- "Null parameter: Node %p Name %X ReturnNode %p",
+ "Null parameter: Node %p Name 0x%X ReturnNode %p",
node, target_name, return_node));
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index 24d05a8..bab5597 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -276,7 +276,7 @@
/* Type code out of range */
- ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
+ ACPI_WARNING((AE_INFO, "Invalid Object Type 0x%X", type));
return_UINT32(ACPI_NS_NORMAL);
}
@@ -764,7 +764,7 @@
/* type code out of range */
- ACPI_WARNING((AE_INFO, "Invalid Object Type %X", type));
+ ACPI_WARNING((AE_INFO, "Invalid Object Type 0x%X", type));
return_UINT32(ACPI_NS_NORMAL);
}
diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c
index 00493e1..7df1a4c 100644
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -460,7 +460,7 @@
default:
- ACPI_ERROR((AE_INFO, "Invalid ArgType %X", arg_type));
+ ACPI_ERROR((AE_INFO, "Invalid ArgType 0x%X", arg_type));
return_VOID;
}
@@ -742,7 +742,7 @@
default:
- ACPI_ERROR((AE_INFO, "Invalid ArgType: %X", arg_type));
+ ACPI_ERROR((AE_INFO, "Invalid ArgType: 0x%X", arg_type));
status = AE_AML_OPERAND_TYPE;
break;
}
diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c
index 59aabae..2f2e776 100644
--- a/drivers/acpi/acpica/psloop.c
+++ b/drivers/acpi/acpica/psloop.c
@@ -136,7 +136,7 @@
/* The opcode is unrecognized. Just skip unknown opcodes */
ACPI_ERROR((AE_INFO,
- "Found unknown opcode %X at AML address %p offset %X, ignoring",
+ "Found unknown opcode 0x%X at AML address %p offset 0x%X, ignoring",
walk_state->opcode, walk_state->parser_state.aml,
walk_state->aml_offset));
@@ -1021,7 +1021,6 @@
if (status == AE_AML_NO_RETURN_VALUE) {
ACPI_EXCEPTION((AE_INFO, status,
"Invoked method did not return a value"));
-
}
ACPI_EXCEPTION((AE_INFO, status,
diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index f2ee3b5..c80a2ee 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -212,7 +212,7 @@
if ((*top_object_list)->common.type != ACPI_TYPE_PACKAGE) {
ACPI_ERROR((AE_INFO,
- "(PRT[%X]) Need sub-package, found %s",
+ "(PRT[%u]) Need sub-package, found %s",
index,
acpi_ut_get_object_type_name
(*top_object_list)));
@@ -223,7 +223,7 @@
if ((*top_object_list)->package.count != 4) {
ACPI_ERROR((AE_INFO,
- "(PRT[%X]) Need package of length 4, found length %d",
+ "(PRT[%u]) Need package of length 4, found length %u",
index, (*top_object_list)->package.count));
return_ACPI_STATUS(AE_AML_PACKAGE_LIMIT);
}
@@ -240,7 +240,7 @@
obj_desc = sub_object_list[0];
if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
ACPI_ERROR((AE_INFO,
- "(PRT[%X].Address) Need Integer, found %s",
+ "(PRT[%u].Address) Need Integer, found %s",
index,
acpi_ut_get_object_type_name(obj_desc)));
return_ACPI_STATUS(AE_BAD_DATA);
@@ -253,7 +253,7 @@
obj_desc = sub_object_list[1];
if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
ACPI_ERROR((AE_INFO,
- "(PRT[%X].Pin) Need Integer, found %s",
+ "(PRT[%u].Pin) Need Integer, found %s",
index,
acpi_ut_get_object_type_name(obj_desc)));
return_ACPI_STATUS(AE_BAD_DATA);
@@ -289,7 +289,7 @@
if (obj_desc->reference.class !=
ACPI_REFCLASS_NAME) {
ACPI_ERROR((AE_INFO,
- "(PRT[%X].Source) Need name, found Reference Class %X",
+ "(PRT[%u].Source) Need name, found Reference Class 0x%X",
index,
obj_desc->reference.class));
return_ACPI_STATUS(AE_BAD_DATA);
@@ -340,7 +340,7 @@
default:
ACPI_ERROR((AE_INFO,
- "(PRT[%X].Source) Need Ref/String/Integer, found %s",
+ "(PRT[%u].Source) Need Ref/String/Integer, found %s",
index,
acpi_ut_get_object_type_name
(obj_desc)));
@@ -358,7 +358,7 @@
obj_desc = sub_object_list[3];
if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
ACPI_ERROR((AE_INFO,
- "(PRT[%X].SourceIndex) Need Integer, found %s",
+ "(PRT[%u].SourceIndex) Need Integer, found %s",
index,
acpi_ut_get_object_type_name(obj_desc)));
return_ACPI_STATUS(AE_BAD_DATA);
diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c
index fd057c7..7335f22 100644
--- a/drivers/acpi/acpica/rslist.c
+++ b/drivers/acpi/acpica/rslist.c
@@ -94,7 +94,7 @@
[resource_index]);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Could not convert AML resource (Type %X)",
+ "Could not convert AML resource (Type 0x%X)",
*aml));
return_ACPI_STATUS(status);
}
@@ -147,7 +147,7 @@
if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
ACPI_ERROR((AE_INFO,
- "Invalid descriptor type (%X) in resource list",
+ "Invalid descriptor type (0x%X) in resource list",
resource->type));
return_ACPI_STATUS(AE_BAD_DATA);
}
@@ -161,7 +161,7 @@
[resource->type]);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Could not convert resource (type %X) to AML",
+ "Could not convert resource (type 0x%X) to AML",
resource->type));
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c
index 07de352..f8cd9e8 100644
--- a/drivers/acpi/acpica/rsmisc.c
+++ b/drivers/acpi/acpica/rsmisc.c
@@ -88,7 +88,7 @@
/* Each internal resource struct is expected to be 32-bit aligned */
ACPI_WARNING((AE_INFO,
- "Misaligned resource pointer (get): %p Type %2.2X Len %X",
+ "Misaligned resource pointer (get): %p Type 0x%2.2X Length %u",
resource, resource->type, resource->length));
}
@@ -541,7 +541,7 @@
* "IRQ Format"), so 0x00 and 0x09 are illegal.
*/
ACPI_ERROR((AE_INFO,
- "Invalid interrupt polarity/trigger in resource list, %X",
+ "Invalid interrupt polarity/trigger in resource list, 0x%X",
aml->irq.flags));
return_ACPI_STATUS(AE_BAD_DATA);
}
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index f43fbe0..1728cb9 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -283,7 +283,7 @@
if (length > sizeof(struct acpi_table_fadt)) {
ACPI_WARNING((AE_INFO,
"FADT (revision %u) is longer than ACPI 2.0 version, "
- "truncating length 0x%X to 0x%X",
+ "truncating length %u to %u",
table->revision, length,
(u32)sizeof(struct acpi_table_fadt)));
}
@@ -422,7 +422,7 @@
if (address64->address && address32 &&
(address64->address != (u64) address32)) {
ACPI_ERROR((AE_INFO,
- "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 32",
+ "32/64X address mismatch in %s: 0x%8.8X/0x%8.8X%8.8X, using 32",
fadt_info_table[i].name, address32,
ACPI_FORMAT_UINT64(address64->address)));
}
@@ -481,7 +481,7 @@
(acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
ACPI_WARNING((AE_INFO,
"32/64X FACS address mismatch in FADT - "
- "%8.8X/%8.8X%8.8X, using 32",
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
acpi_gbl_FADT.facs,
ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
@@ -492,7 +492,7 @@
(acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
ACPI_WARNING((AE_INFO,
"32/64X DSDT address mismatch in FADT - "
- "%8.8X/%8.8X%8.8X, using 32",
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
acpi_gbl_FADT.dsdt,
ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
@@ -521,7 +521,7 @@
if (address64->address &&
(address64->bit_width != ACPI_MUL_8(length))) {
ACPI_WARNING((AE_INFO,
- "32/64X length mismatch in %s: %d/%d",
+ "32/64X length mismatch in %s: %u/%u",
name, ACPI_MUL_8(length),
address64->bit_width));
}
@@ -534,7 +534,7 @@
if (!address64->address || !length) {
ACPI_ERROR((AE_INFO,
"Required field %s has zero address and/or length:"
- " %8.8X%8.8X/%X",
+ " 0x%8.8X%8.8X/0x%X",
name,
ACPI_FORMAT_UINT64(address64->
address),
@@ -550,7 +550,7 @@
(!address64->address && length)) {
ACPI_WARNING((AE_INFO,
"Optional field %s has zero address or length: "
- "%8.8X%8.8X/%X",
+ "0x%8.8X%8.8X/0x%X",
name,
ACPI_FORMAT_UINT64(address64->
address),
@@ -600,7 +600,7 @@
(fadt_info_table[i].default_length !=
target64->bit_width)) {
ACPI_WARNING((AE_INFO,
- "Invalid length for %s: %d, using default %d",
+ "Invalid length for %s: %u, using default %u",
fadt_info_table[i].name,
target64->bit_width,
fadt_info_table[i].
diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c
index 02723a9..f47a70e 100644
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -309,7 +309,7 @@
if (checksum) {
ACPI_WARNING((AE_INFO,
- "Incorrect checksum in table [%4.4s] - %2.2X, should be %2.2X",
+ "Incorrect checksum in table [%4.4s] - 0x%2.2X, should be 0x%2.2X",
table->signature, table->checksum,
(u8) (table->checksum - checksum)));
@@ -496,7 +496,7 @@
/* Will truncate 64-bit address to 32 bits, issue warning */
ACPI_WARNING((AE_INFO,
- "64-bit Physical Address in XSDT is too large (%8.8X%8.8X),"
+ "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X),"
" truncating",
ACPI_FORMAT_UINT64(address64)));
}
diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c
index dda6e8c..fd2c07d 100644
--- a/drivers/acpi/acpica/tbxfroot.c
+++ b/drivers/acpi/acpica/tbxfroot.c
@@ -134,7 +134,7 @@
ACPI_EBDA_PTR_LENGTH);
if (!table_ptr) {
ACPI_ERROR((AE_INFO,
- "Could not map memory at %8.8X for length %X",
+ "Could not map memory at 0x%8.8X for length %u",
ACPI_EBDA_PTR_LOCATION, ACPI_EBDA_PTR_LENGTH));
return_ACPI_STATUS(AE_NO_MEMORY);
@@ -159,7 +159,7 @@
ACPI_EBDA_WINDOW_SIZE);
if (!table_ptr) {
ACPI_ERROR((AE_INFO,
- "Could not map memory at %8.8X for length %X",
+ "Could not map memory at 0x%8.8X for length %u",
physical_address, ACPI_EBDA_WINDOW_SIZE));
return_ACPI_STATUS(AE_NO_MEMORY);
@@ -191,7 +191,7 @@
if (!table_ptr) {
ACPI_ERROR((AE_INFO,
- "Could not map memory at %8.8X for length %X",
+ "Could not map memory at 0x%8.8X for length %u",
ACPI_HI_RSDP_WINDOW_BASE,
ACPI_HI_RSDP_WINDOW_SIZE));
diff --git a/drivers/acpi/acpica/utalloc.c b/drivers/acpi/acpica/utalloc.c
index 3d706b8..8f08962 100644
--- a/drivers/acpi/acpica/utalloc.c
+++ b/drivers/acpi/acpica/utalloc.c
@@ -340,7 +340,7 @@
/* Report allocation error */
ACPI_WARNING((module, line,
- "Could not allocate size %X", (u32) size));
+ "Could not allocate size %u", (u32) size));
return_PTR(NULL);
}
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index 16b51c6..ed794cd 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -434,7 +434,7 @@
default:
- ACPI_ERROR((AE_INFO, "Unknown action (%X)", action));
+ ACPI_ERROR((AE_INFO, "Unknown action (0x%X)", action));
break;
}
@@ -444,8 +444,8 @@
*/
if (count > ACPI_MAX_REFERENCE_COUNT) {
ACPI_WARNING((AE_INFO,
- "Large Reference Count (%X) in object %p", count,
- object));
+ "Large Reference Count (0x%X) in object %p",
+ count, object));
}
}
diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c
index 7f5e734..6dfdeb6 100644
--- a/drivers/acpi/acpica/uteval.c
+++ b/drivers/acpi/acpica/uteval.c
@@ -307,7 +307,7 @@
prefix_node, path, AE_TYPE);
ACPI_ERROR((AE_INFO,
- "Type returned from %s was incorrect: %s, expected Btypes: %X",
+ "Type returned from %s was incorrect: %s, expected Btypes: 0x%X",
path,
acpi_ut_get_object_type_name(info->return_object),
expected_return_btypes));
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 32982e2..e8d0724 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -205,7 +205,7 @@
/* Guard against multiple allocations of ID to the same location */
if (*owner_id) {
- ACPI_ERROR((AE_INFO, "Owner ID [%2.2X] already exists",
+ ACPI_ERROR((AE_INFO, "Owner ID [0x%2.2X] already exists",
*owner_id));
return_ACPI_STATUS(AE_ALREADY_EXISTS);
}
@@ -315,7 +315,7 @@
/* Zero is not a valid owner_iD */
if (owner_id == 0) {
- ACPI_ERROR((AE_INFO, "Invalid OwnerId: %2.2X", owner_id));
+ ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
return_VOID;
}
@@ -341,7 +341,7 @@
acpi_gbl_owner_id_mask[index] ^= bit;
} else {
ACPI_ERROR((AE_INFO,
- "Release of non-allocated OwnerId: %2.2X",
+ "Release of non-allocated OwnerId: 0x%2.2X",
owner_id + 1));
}
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index 55d014e..058b3df 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -258,7 +258,7 @@
acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
} else {
ACPI_EXCEPTION((AE_INFO, status,
- "Thread %p could not acquire Mutex [%X]",
+ "Thread %p could not acquire Mutex [0x%X]",
ACPI_CAST_PTR(void, this_thread_id), mutex_id));
}
@@ -297,7 +297,7 @@
*/
if (acpi_gbl_mutex_info[mutex_id].thread_id == ACPI_MUTEX_NOT_ACQUIRED) {
ACPI_ERROR((AE_INFO,
- "Mutex [%X] is not acquired, cannot release",
+ "Mutex [0x%X] is not acquired, cannot release",
mutex_id));
return (AE_NOT_ACQUIRED);
diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
index 3356f0c..fd1fa27 100644
--- a/drivers/acpi/acpica/utobject.c
+++ b/drivers/acpi/acpica/utobject.c
@@ -251,7 +251,7 @@
buffer = ACPI_ALLOCATE_ZEROED(buffer_size);
if (!buffer) {
- ACPI_ERROR((AE_INFO, "Could not allocate size %X",
+ ACPI_ERROR((AE_INFO, "Could not allocate size %u",
(u32) buffer_size));
acpi_ut_remove_reference(buffer_desc);
return_PTR(NULL);
@@ -303,7 +303,7 @@
*/
string = ACPI_ALLOCATE_ZEROED(string_size + 1);
if (!string) {
- ACPI_ERROR((AE_INFO, "Could not allocate size %X",
+ ACPI_ERROR((AE_INFO, "Could not allocate size %u",
(u32) string_size));
acpi_ut_remove_reference(string_desc);
return_PTR(NULL);
@@ -533,7 +533,7 @@
*/
ACPI_ERROR((AE_INFO,
"Cannot convert to external object - "
- "unsupported Reference Class [%s] %X in object %p",
+ "unsupported Reference Class [%s] 0x%X in object %p",
acpi_ut_get_reference_name(internal_object),
internal_object->reference.class,
internal_object));
@@ -545,7 +545,7 @@
default:
ACPI_ERROR((AE_INFO, "Cannot convert to external object - "
- "unsupported type [%s] %X in object %p",
+ "unsupported type [%s] 0x%X in object %p",
acpi_ut_get_object_type_name(internal_object),
internal_object->common.type, internal_object));
status = AE_TYPE;