batman-adv: remove bonding and interface alternating
Remove bonding and interface alternating code - it will be replaced
by a new, network-wide multi interface optimization which enables
both bonding and interface alternating in a better way.
Keep the sysfs and find router function though, this will be needed
later.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index 7e8aa17..4fd2687 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -96,115 +96,6 @@
batadv_neigh_node_free_ref(router);
}
-/* caller must hold the neigh_list_lock */
-void batadv_bonding_candidate_del(struct batadv_orig_node *orig_node,
- struct batadv_neigh_node *neigh_node)
-{
- /* this neighbor is not part of our candidate list */
- if (list_empty(&neigh_node->bonding_list))
- goto out;
-
- list_del_rcu(&neigh_node->bonding_list);
- INIT_LIST_HEAD(&neigh_node->bonding_list);
- batadv_neigh_node_free_ref(neigh_node);
- atomic_dec(&orig_node->bond_candidates);
-
-out:
- return;
-}
-
-/**
- * batadv_bonding_candidate_add - consider a new link for bonding mode towards
- * the given originator
- * @bat_priv: the bat priv with all the soft interface information
- * @orig_node: the target node
- * @neigh_node: the neighbor representing the new link to consider for bonding
- * mode
- */
-void batadv_bonding_candidate_add(struct batadv_priv *bat_priv,
- struct batadv_orig_node *orig_node,
- struct batadv_neigh_node *neigh_node)
-{
- struct batadv_algo_ops *bao = bat_priv->bat_algo_ops;
- struct batadv_neigh_node *tmp_neigh_node, *router = NULL;
- uint8_t interference_candidate = 0;
-
- spin_lock_bh(&orig_node->neigh_list_lock);
-
- /* only consider if it has the same primary address ... */
- if (!batadv_compare_eth(orig_node->orig,
- neigh_node->orig_node->primary_addr))
- goto candidate_del;
-
- router = batadv_orig_node_get_router(orig_node);
- if (!router)
- goto candidate_del;
-
-
- /* ... and is good enough to be considered */
- if (bao->bat_neigh_is_equiv_or_better(neigh_node, router))
- goto candidate_del;
-
- /* check if we have another candidate with the same mac address or
- * interface. If we do, we won't select this candidate because of
- * possible interference.
- */
- hlist_for_each_entry_rcu(tmp_neigh_node,
- &orig_node->neigh_list, list) {
- if (tmp_neigh_node == neigh_node)
- continue;
-
- /* we only care if the other candidate is even
- * considered as candidate.
- */
- if (list_empty(&tmp_neigh_node->bonding_list))
- continue;
-
- if ((neigh_node->if_incoming == tmp_neigh_node->if_incoming) ||
- (batadv_compare_eth(neigh_node->addr,
- tmp_neigh_node->addr))) {
- interference_candidate = 1;
- break;
- }
- }
-
- /* don't care further if it is an interference candidate */
- if (interference_candidate)
- goto candidate_del;
-
- /* this neighbor already is part of our candidate list */
- if (!list_empty(&neigh_node->bonding_list))
- goto out;
-
- if (!atomic_inc_not_zero(&neigh_node->refcount))
- goto out;
-
- list_add_rcu(&neigh_node->bonding_list, &orig_node->bond_list);
- atomic_inc(&orig_node->bond_candidates);
- goto out;
-
-candidate_del:
- batadv_bonding_candidate_del(orig_node, neigh_node);
-
-out:
- spin_unlock_bh(&orig_node->neigh_list_lock);
-
- if (router)
- batadv_neigh_node_free_ref(router);
-}
-
-/* copy primary address for bonding */
-void
-batadv_bonding_save_primary(const struct batadv_orig_node *orig_node,
- struct batadv_orig_node *orig_neigh_node,
- const struct batadv_ogm_packet *batman_ogm_packet)
-{
- if (!(batman_ogm_packet->flags & BATADV_PRIMARIES_FIRST_HOP))
- return;
-
- memcpy(orig_neigh_node->primary_addr, orig_node->orig, ETH_ALEN);
-}
-
/* checks whether the host restarted and is in the protection time.
* returns:
* 0 if the packet is to be accepted
@@ -459,114 +350,6 @@
return ret;
}
-/* In the bonding case, send the packets in a round
- * robin fashion over the remaining interfaces.
- *
- * This method rotates the bonding list and increases the
- * returned router's refcount.
- */
-static struct batadv_neigh_node *
-batadv_find_bond_router(struct batadv_orig_node *primary_orig,
- const struct batadv_hard_iface *recv_if)
-{
- struct batadv_neigh_node *tmp_neigh_node;
- struct batadv_neigh_node *router = NULL, *first_candidate = NULL;
-
- rcu_read_lock();
- list_for_each_entry_rcu(tmp_neigh_node, &primary_orig->bond_list,
- bonding_list) {
- if (!first_candidate)
- first_candidate = tmp_neigh_node;
-
- /* recv_if == NULL on the first node. */
- if (tmp_neigh_node->if_incoming == recv_if)
- continue;
-
- if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
- continue;
-
- router = tmp_neigh_node;
- break;
- }
-
- /* use the first candidate if nothing was found. */
- if (!router && first_candidate &&
- atomic_inc_not_zero(&first_candidate->refcount))
- router = first_candidate;
-
- if (!router)
- goto out;
-
- /* selected should point to the next element
- * after the current router
- */
- spin_lock_bh(&primary_orig->neigh_list_lock);
- /* this is a list_move(), which unfortunately
- * does not exist as rcu version
- */
- list_del_rcu(&primary_orig->bond_list);
- list_add_rcu(&primary_orig->bond_list,
- &router->bonding_list);
- spin_unlock_bh(&primary_orig->neigh_list_lock);
-
-out:
- rcu_read_unlock();
- return router;
-}
-
-/**
- * batadv_find_ifalter_router - find the best of the remaining candidates which
- * are not using this interface
- * @bat_priv: the bat priv with all the soft interface information
- * @primary_orig: the destination
- * @recv_if: the interface that the router returned by this function has to not
- * use
- *
- * Returns the best candidate towards primary_orig that is not using recv_if.
- * Increases the returned neighbor's refcount
- */
-static struct batadv_neigh_node *
-batadv_find_ifalter_router(struct batadv_priv *bat_priv,
- struct batadv_orig_node *primary_orig,
- const struct batadv_hard_iface *recv_if)
-{
- struct batadv_neigh_node *router = NULL, *first_candidate = NULL;
- struct batadv_algo_ops *bao = bat_priv->bat_algo_ops;
- struct batadv_neigh_node *tmp_neigh_node;
-
- rcu_read_lock();
- list_for_each_entry_rcu(tmp_neigh_node, &primary_orig->bond_list,
- bonding_list) {
- if (!first_candidate)
- first_candidate = tmp_neigh_node;
-
- /* recv_if == NULL on the first node. */
- if (tmp_neigh_node->if_incoming == recv_if)
- continue;
-
- if (router && bao->bat_neigh_cmp(tmp_neigh_node, router))
- continue;
-
- if (!atomic_inc_not_zero(&tmp_neigh_node->refcount))
- continue;
-
- /* decrement refcount of previously selected router */
- if (router)
- batadv_neigh_node_free_ref(router);
-
- /* we found a better router (or at least one valid router) */
- router = tmp_neigh_node;
- }
-
- /* use the first candidate if nothing was found. */
- if (!router && first_candidate &&
- atomic_inc_not_zero(&first_candidate->refcount))
- router = first_candidate;
-
- rcu_read_unlock();
- return router;
-}
-
/**
* batadv_check_unicast_packet - Check for malformed unicast packets
* @bat_priv: the bat priv with all the soft interface information
@@ -604,95 +387,30 @@
return 0;
}
-/* find a suitable router for this originator, and use
- * bonding if possible. increases the found neighbors
- * refcount.
+/**
+ * batadv_find_router - find a suitable router for this originator
+ * @bat_priv: the bat priv with all the soft interface information
+ * @orig_node: the destination node
+ * @recv_if: pointer to interface this packet was received on
+ *
+ * Returns the router which should be used for this orig_node on
+ * this interface, or NULL if not available.
*/
struct batadv_neigh_node *
batadv_find_router(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig_node,
const struct batadv_hard_iface *recv_if)
{
- struct batadv_orig_node *primary_orig_node;
- struct batadv_orig_node *router_orig;
struct batadv_neigh_node *router;
- static uint8_t zero_mac[ETH_ALEN] = {0, 0, 0, 0, 0, 0};
- int bonding_enabled;
- uint8_t *primary_addr;
if (!orig_node)
return NULL;
router = batadv_orig_node_get_router(orig_node);
- if (!router)
- goto err;
- /* without bonding, the first node should
- * always choose the default router.
- */
- bonding_enabled = atomic_read(&bat_priv->bonding);
+ /* TODO: fill this later with new bonding mechanism */
- rcu_read_lock();
- /* select default router to output */
- router_orig = router->orig_node;
- if (!router_orig)
- goto err_unlock;
-
- if ((!recv_if) && (!bonding_enabled))
- goto return_router;
-
- primary_addr = router_orig->primary_addr;
-
- /* if we have something in the primary_addr, we can search
- * for a potential bonding candidate.
- */
- if (batadv_compare_eth(primary_addr, zero_mac))
- goto return_router;
-
- /* find the orig_node which has the primary interface. might
- * even be the same as our router_orig in many cases
- */
- if (batadv_compare_eth(primary_addr, router_orig->orig)) {
- primary_orig_node = router_orig;
- } else {
- primary_orig_node = batadv_orig_hash_find(bat_priv,
- primary_addr);
- if (!primary_orig_node)
- goto return_router;
-
- batadv_orig_node_free_ref(primary_orig_node);
- }
-
- /* with less than 2 candidates, we can't do any
- * bonding and prefer the original router.
- */
- if (atomic_read(&primary_orig_node->bond_candidates) < 2)
- goto return_router;
-
- /* all nodes between should choose a candidate which
- * is is not on the interface where the packet came
- * in.
- */
- batadv_neigh_node_free_ref(router);
-
- if (bonding_enabled)
- router = batadv_find_bond_router(primary_orig_node, recv_if);
- else
- router = batadv_find_ifalter_router(bat_priv, primary_orig_node,
- recv_if);
-
-return_router:
- if (router && router->if_incoming->if_status != BATADV_IF_ACTIVE)
- goto err_unlock;
-
- rcu_read_unlock();
return router;
-err_unlock:
- rcu_read_unlock();
-err:
- if (router)
- batadv_neigh_node_free_ref(router);
- return NULL;
}
static int batadv_route_unicast_packet(struct sk_buff *skb,