| /* |
| * omap_hwmod implementation for OMAP2/3/4 |
| * |
| * Copyright (C) 2009-2011 Nokia Corporation |
| * Copyright (C) 2011-2012 Texas Instruments, Inc. |
| * |
| * Paul Walmsley, BenoƮt Cousson, Kevin Hilman |
| * |
| * Created in collaboration with (alphabetical order): Thara Gopinath, |
| * Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand |
| * Sawant, Santosh Shilimkar, Richard Woodruff |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Introduction |
| * ------------ |
| * One way to view an OMAP SoC is as a collection of largely unrelated |
| * IP blocks connected by interconnects. The IP blocks include |
| * devices such as ARM processors, audio serial interfaces, UARTs, |
| * etc. Some of these devices, like the DSP, are created by TI; |
| * others, like the SGX, largely originate from external vendors. In |
| * TI's documentation, on-chip devices are referred to as "OMAP |
| * modules." Some of these IP blocks are identical across several |
| * OMAP versions. Others are revised frequently. |
| * |
| * These OMAP modules are tied together by various interconnects. |
| * Most of the address and data flow between modules is via OCP-based |
| * interconnects such as the L3 and L4 buses; but there are other |
| * interconnects that distribute the hardware clock tree, handle idle |
| * and reset signaling, supply power, and connect the modules to |
| * various pads or balls on the OMAP package. |
| * |
| * OMAP hwmod provides a consistent way to describe the on-chip |
| * hardware blocks and their integration into the rest of the chip. |
| * This description can be automatically generated from the TI |
| * hardware database. OMAP hwmod provides a standard, consistent API |
| * to reset, enable, idle, and disable these hardware blocks. And |
| * hwmod provides a way for other core code, such as the Linux device |
| * code or the OMAP power management and address space mapping code, |
| * to query the hardware database. |
| * |
| * Using hwmod |
| * ----------- |
| * Drivers won't call hwmod functions directly. That is done by the |
| * omap_device code, and in rare occasions, by custom integration code |
| * in arch/arm/ *omap*. The omap_device code includes functions to |
| * build a struct platform_device using omap_hwmod data, and that is |
| * currently how hwmod data is communicated to drivers and to the |
| * Linux driver model. Most drivers will call omap_hwmod functions only |
| * indirectly, via pm_runtime*() functions. |
| * |
| * From a layering perspective, here is where the OMAP hwmod code |
| * fits into the kernel software stack: |
| * |
| * +-------------------------------+ |
| * | Device driver code | |
| * | (e.g., drivers/) | |
| * +-------------------------------+ |
| * | Linux driver model | |
| * | (platform_device / | |
| * | platform_driver data/code) | |
| * +-------------------------------+ |
| * | OMAP core-driver integration | |
| * |(arch/arm/mach-omap2/devices.c)| |
| * +-------------------------------+ |
| * | omap_device code | |
| * | (../plat-omap/omap_device.c) | |
| * +-------------------------------+ |
| * ----> | omap_hwmod code/data | <----- |
| * | (../mach-omap2/omap_hwmod*) | |
| * +-------------------------------+ |
| * | OMAP clock/PRCM/register fns | |
| * | ({read,write}l_relaxed, clk*) | |
| * +-------------------------------+ |
| * |
| * Device drivers should not contain any OMAP-specific code or data in |
| * them. They should only contain code to operate the IP block that |
| * the driver is responsible for. This is because these IP blocks can |
| * also appear in other SoCs, either from TI (such as DaVinci) or from |
| * other manufacturers; and drivers should be reusable across other |
| * platforms. |
| * |
| * The OMAP hwmod code also will attempt to reset and idle all on-chip |
| * devices upon boot. The goal here is for the kernel to be |
| * completely self-reliant and independent from bootloaders. This is |
| * to ensure a repeatable configuration, both to ensure consistent |
| * runtime behavior, and to make it easier for others to reproduce |
| * bugs. |
| * |
| * OMAP module activity states |
| * --------------------------- |
| * The hwmod code considers modules to be in one of several activity |
| * states. IP blocks start out in an UNKNOWN state, then once they |
| * are registered via the hwmod code, proceed to the REGISTERED state. |
| * Once their clock names are resolved to clock pointers, the module |
| * enters the CLKS_INITED state; and finally, once the module has been |
| * reset and the integration registers programmed, the INITIALIZED state |
| * is entered. The hwmod code will then place the module into either |
| * the IDLE state to save power, or in the case of a critical system |
| * module, the ENABLED state. |
| * |
| * OMAP core integration code can then call omap_hwmod*() functions |
| * directly to move the module between the IDLE, ENABLED, and DISABLED |
| * states, as needed. This is done during both the PM idle loop, and |
| * in the OMAP core integration code's implementation of the PM runtime |
| * functions. |
| * |
| * References |
| * ---------- |
| * This is a partial list. |
| * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) |
| * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) |
| * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) |
| * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140) |
| * - Open Core Protocol Specification 2.2 |
| * |
| * To do: |
| * - handle IO mapping |
| * - bus throughput & module latency measurement code |
| * |
| * XXX add tests at the beginning of each function to ensure the hwmod is |
| * in the appropriate state |
| * XXX error return values should be checked to ensure that they are |
| * appropriate |
| */ |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/io.h> |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/list.h> |
| #include <linux/mutex.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/bootmem.h> |
| #include <linux/cpu.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| |
| #include <asm/system_misc.h> |
| |
| #include "clock.h" |
| #include "omap_hwmod.h" |
| |
| #include "soc.h" |
| #include "common.h" |
| #include "clockdomain.h" |
| #include "powerdomain.h" |
| #include "cm2xxx.h" |
| #include "cm3xxx.h" |
| #include "cminst44xx.h" |
| #include "cm33xx.h" |
| #include "prm.h" |
| #include "prm3xxx.h" |
| #include "prm44xx.h" |
| #include "prm33xx.h" |
| #include "prminst44xx.h" |
| #include "mux.h" |
| #include "pm.h" |
| |
| /* Name of the OMAP hwmod for the MPU */ |
| #define MPU_INITIATOR_NAME "mpu" |
| |
| /* |
| * Number of struct omap_hwmod_link records per struct |
| * omap_hwmod_ocp_if record (master->slave and slave->master) |
| */ |
| #define LINKS_PER_OCP_IF 2 |
| |
| /** |
| * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations |
| * @enable_module: function to enable a module (via MODULEMODE) |
| * @disable_module: function to disable a module (via MODULEMODE) |
| * |
| * XXX Eventually this functionality will be hidden inside the PRM/CM |
| * device drivers. Until then, this should avoid huge blocks of cpu_is_*() |
| * conditionals in this code. |
| */ |
| struct omap_hwmod_soc_ops { |
| void (*enable_module)(struct omap_hwmod *oh); |
| int (*disable_module)(struct omap_hwmod *oh); |
| int (*wait_target_ready)(struct omap_hwmod *oh); |
| int (*assert_hardreset)(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri); |
| int (*deassert_hardreset)(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri); |
| int (*is_hardreset_asserted)(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri); |
| int (*init_clkdm)(struct omap_hwmod *oh); |
| void (*update_context_lost)(struct omap_hwmod *oh); |
| int (*get_context_lost)(struct omap_hwmod *oh); |
| }; |
| |
| /* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ |
| static struct omap_hwmod_soc_ops soc_ops; |
| |
| /* omap_hwmod_list contains all registered struct omap_hwmods */ |
| static LIST_HEAD(omap_hwmod_list); |
| |
| /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ |
| static struct omap_hwmod *mpu_oh; |
| |
| /* io_chain_lock: used to serialize reconfigurations of the I/O chain */ |
| static DEFINE_SPINLOCK(io_chain_lock); |
| |
| /* |
| * linkspace: ptr to a buffer that struct omap_hwmod_link records are |
| * allocated from - used to reduce the number of small memory |
| * allocations, which has a significant impact on performance |
| */ |
| static struct omap_hwmod_link *linkspace; |
| |
| /* |
| * free_ls, max_ls: array indexes into linkspace; representing the |
| * next free struct omap_hwmod_link index, and the maximum number of |
| * struct omap_hwmod_link records allocated (respectively) |
| */ |
| static unsigned short free_ls, max_ls, ls_supp; |
| |
| /* inited: set to true once the hwmod code is initialized */ |
| static bool inited; |
| |
| /* Private functions */ |
| |
| /** |
| * _fetch_next_ocp_if - return the next OCP interface in a list |
| * @p: ptr to a ptr to the list_head inside the ocp_if to return |
| * @i: pointer to the index of the element pointed to by @p in the list |
| * |
| * Return a pointer to the struct omap_hwmod_ocp_if record |
| * containing the struct list_head pointed to by @p, and increment |
| * @p such that a future call to this routine will return the next |
| * record. |
| */ |
| static struct omap_hwmod_ocp_if *_fetch_next_ocp_if(struct list_head **p, |
| int *i) |
| { |
| struct omap_hwmod_ocp_if *oi; |
| |
| oi = list_entry(*p, struct omap_hwmod_link, node)->ocp_if; |
| *p = (*p)->next; |
| |
| *i = *i + 1; |
| |
| return oi; |
| } |
| |
| /** |
| * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy |
| * @oh: struct omap_hwmod * |
| * |
| * Load the current value of the hwmod OCP_SYSCONFIG register into the |
| * struct omap_hwmod for later use. Returns -EINVAL if the hwmod has no |
| * OCP_SYSCONFIG register or 0 upon success. |
| */ |
| static int _update_sysc_cache(struct omap_hwmod *oh) |
| { |
| if (!oh->class->sysc) { |
| WARN(1, "omap_hwmod: %s: cannot read OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| /* XXX ensure module interface clock is up */ |
| |
| oh->_sysc_cache = omap_hwmod_read(oh, oh->class->sysc->sysc_offs); |
| |
| if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE)) |
| oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED; |
| |
| return 0; |
| } |
| |
| /** |
| * _write_sysconfig - write a value to the module's OCP_SYSCONFIG register |
| * @v: OCP_SYSCONFIG value to write |
| * @oh: struct omap_hwmod * |
| * |
| * Write @v into the module class' OCP_SYSCONFIG register, if it has |
| * one. No return value. |
| */ |
| static void _write_sysconfig(u32 v, struct omap_hwmod *oh) |
| { |
| if (!oh->class->sysc) { |
| WARN(1, "omap_hwmod: %s: cannot write OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name); |
| return; |
| } |
| |
| /* XXX ensure module interface clock is up */ |
| |
| /* Module might have lost context, always update cache and register */ |
| oh->_sysc_cache = v; |
| omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs); |
| } |
| |
| /** |
| * _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v |
| * @oh: struct omap_hwmod * |
| * @standbymode: MIDLEMODE field bits |
| * @v: pointer to register contents to modify |
| * |
| * Update the master standby mode bits in @v to be @standbymode for |
| * the @oh hwmod. Does not write to the hardware. Returns -EINVAL |
| * upon error or 0 upon success. |
| */ |
| static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode, |
| u32 *v) |
| { |
| u32 mstandby_mask; |
| u8 mstandby_shift; |
| |
| if (!oh->class->sysc || |
| !(oh->class->sysc->sysc_flags & SYSC_HAS_MIDLEMODE)) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| mstandby_shift = oh->class->sysc->sysc_fields->midle_shift; |
| mstandby_mask = (0x3 << mstandby_shift); |
| |
| *v &= ~mstandby_mask; |
| *v |= __ffs(standbymode) << mstandby_shift; |
| |
| return 0; |
| } |
| |
| /** |
| * _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v |
| * @oh: struct omap_hwmod * |
| * @idlemode: SIDLEMODE field bits |
| * @v: pointer to register contents to modify |
| * |
| * Update the slave idle mode bits in @v to be @idlemode for the @oh |
| * hwmod. Does not write to the hardware. Returns -EINVAL upon error |
| * or 0 upon success. |
| */ |
| static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v) |
| { |
| u32 sidle_mask; |
| u8 sidle_shift; |
| |
| if (!oh->class->sysc || |
| !(oh->class->sysc->sysc_flags & SYSC_HAS_SIDLEMODE)) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| sidle_shift = oh->class->sysc->sysc_fields->sidle_shift; |
| sidle_mask = (0x3 << sidle_shift); |
| |
| *v &= ~sidle_mask; |
| *v |= __ffs(idlemode) << sidle_shift; |
| |
| return 0; |
| } |
| |
| /** |
| * _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v |
| * @oh: struct omap_hwmod * |
| * @clockact: CLOCKACTIVITY field bits |
| * @v: pointer to register contents to modify |
| * |
| * Update the clockactivity mode bits in @v to be @clockact for the |
| * @oh hwmod. Used for additional powersaving on some modules. Does |
| * not write to the hardware. Returns -EINVAL upon error or 0 upon |
| * success. |
| */ |
| static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v) |
| { |
| u32 clkact_mask; |
| u8 clkact_shift; |
| |
| if (!oh->class->sysc || |
| !(oh->class->sysc->sysc_flags & SYSC_HAS_CLOCKACTIVITY)) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| clkact_shift = oh->class->sysc->sysc_fields->clkact_shift; |
| clkact_mask = (0x3 << clkact_shift); |
| |
| *v &= ~clkact_mask; |
| *v |= clockact << clkact_shift; |
| |
| return 0; |
| } |
| |
| /** |
| * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v |
| * @oh: struct omap_hwmod * |
| * @v: pointer to register contents to modify |
| * |
| * Set the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon |
| * error or 0 upon success. |
| */ |
| static int _set_softreset(struct omap_hwmod *oh, u32 *v) |
| { |
| u32 softrst_mask; |
| |
| if (!oh->class->sysc || |
| !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); |
| |
| *v |= softrst_mask; |
| |
| return 0; |
| } |
| |
| /** |
| * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v |
| * @oh: struct omap_hwmod * |
| * @v: pointer to register contents to modify |
| * |
| * Clear the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon |
| * error or 0 upon success. |
| */ |
| static int _clear_softreset(struct omap_hwmod *oh, u32 *v) |
| { |
| u32 softrst_mask; |
| |
| if (!oh->class->sysc || |
| !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, |
| "omap_hwmod: %s: sysc_fields absent for sysconfig class\n", |
| oh->name); |
| return -EINVAL; |
| } |
| |
| softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); |
| |
| *v &= ~softrst_mask; |
| |
| return 0; |
| } |
| |
| /** |
| * _wait_softreset_complete - wait for an OCP softreset to complete |
| * @oh: struct omap_hwmod * to wait on |
| * |
| * Wait until the IP block represented by @oh reports that its OCP |
| * softreset is complete. This can be triggered by software (see |
| * _ocp_softreset()) or by hardware upon returning from off-mode (one |
| * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT |
| * microseconds. Returns the number of microseconds waited. |
| */ |
| static int _wait_softreset_complete(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_class_sysconfig *sysc; |
| u32 softrst_mask; |
| int c = 0; |
| |
| sysc = oh->class->sysc; |
| |
| if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS) |
| omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs) |
| & SYSS_RESETDONE_MASK), |
| MAX_MODULE_SOFTRESET_WAIT, c); |
| else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { |
| softrst_mask = (0x1 << sysc->sysc_fields->srst_shift); |
| omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs) |
| & softrst_mask), |
| MAX_MODULE_SOFTRESET_WAIT, c); |
| } |
| |
| return c; |
| } |
| |
| /** |
| * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v |
| * @oh: struct omap_hwmod * |
| * |
| * The DMADISABLE bit is a semi-automatic bit present in sysconfig register |
| * of some modules. When the DMA must perform read/write accesses, the |
| * DMADISABLE bit is cleared by the hardware. But when the DMA must stop |
| * for power management, software must set the DMADISABLE bit back to 1. |
| * |
| * Set the DMADISABLE bit in @v for hwmod @oh. Returns -EINVAL upon |
| * error or 0 upon success. |
| */ |
| static int _set_dmadisable(struct omap_hwmod *oh) |
| { |
| u32 v; |
| u32 dmadisable_mask; |
| |
| if (!oh->class->sysc || |
| !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE)) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| /* clocks must be on for this operation */ |
| if (oh->_state != _HWMOD_STATE_ENABLED) { |
| pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name); |
| return -EINVAL; |
| } |
| |
| pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name); |
| |
| v = oh->_sysc_cache; |
| dmadisable_mask = |
| (0x1 << oh->class->sysc->sysc_fields->dmadisable_shift); |
| v |= dmadisable_mask; |
| _write_sysconfig(v, oh); |
| |
| return 0; |
| } |
| |
| /** |
| * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v |
| * @oh: struct omap_hwmod * |
| * @autoidle: desired AUTOIDLE bitfield value (0 or 1) |
| * @v: pointer to register contents to modify |
| * |
| * Update the module autoidle bit in @v to be @autoidle for the @oh |
| * hwmod. The autoidle bit controls whether the module can gate |
| * internal clocks automatically when it isn't doing anything; the |
| * exact function of this bit varies on a per-module basis. This |
| * function does not write to the hardware. Returns -EINVAL upon |
| * error or 0 upon success. |
| */ |
| static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle, |
| u32 *v) |
| { |
| u32 autoidle_mask; |
| u8 autoidle_shift; |
| |
| if (!oh->class->sysc || |
| !(oh->class->sysc->sysc_flags & SYSC_HAS_AUTOIDLE)) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| autoidle_shift = oh->class->sysc->sysc_fields->autoidle_shift; |
| autoidle_mask = (0x1 << autoidle_shift); |
| |
| *v &= ~autoidle_mask; |
| *v |= autoidle << autoidle_shift; |
| |
| return 0; |
| } |
| |
| /** |
| * _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux |
| * @oh: struct omap_hwmod * |
| * @set_wake: bool value indicating to set (true) or clear (false) wakeup enable |
| * |
| * Set or clear the I/O pad wakeup flag in the mux entries for the |
| * hwmod @oh. This function changes the @oh->mux->pads_dynamic array |
| * in memory. If the hwmod is currently idled, and the new idle |
| * values don't match the previous ones, this function will also |
| * update the SCM PADCTRL registers. Otherwise, if the hwmod is not |
| * currently idled, this function won't touch the hardware: the new |
| * mux settings are written to the SCM PADCTRL registers when the |
| * hwmod is idled. No return value. |
| */ |
| static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake) |
| { |
| struct omap_device_pad *pad; |
| bool change = false; |
| u16 prev_idle; |
| int j; |
| |
| if (!oh->mux || !oh->mux->enabled) |
| return; |
| |
| for (j = 0; j < oh->mux->nr_pads_dynamic; j++) { |
| pad = oh->mux->pads_dynamic[j]; |
| |
| if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP)) |
| continue; |
| |
| prev_idle = pad->idle; |
| |
| if (set_wake) |
| pad->idle |= OMAP_WAKEUP_EN; |
| else |
| pad->idle &= ~OMAP_WAKEUP_EN; |
| |
| if (prev_idle != pad->idle) |
| change = true; |
| } |
| |
| if (change && oh->_state == _HWMOD_STATE_IDLE) |
| omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); |
| } |
| |
| /** |
| * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware |
| * @oh: struct omap_hwmod * |
| * |
| * Allow the hardware module @oh to send wakeups. Returns -EINVAL |
| * upon error or 0 upon success. |
| */ |
| static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) |
| { |
| if (!oh->class->sysc || |
| !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) || |
| (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) || |
| (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP))) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) |
| *v |= 0x1 << oh->class->sysc->sysc_fields->enwkup_shift; |
| |
| if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) |
| _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); |
| if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) |
| _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); |
| |
| /* XXX test pwrdm_get_wken for this hwmod's subsystem */ |
| |
| return 0; |
| } |
| |
| /** |
| * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware |
| * @oh: struct omap_hwmod * |
| * |
| * Prevent the hardware module @oh to send wakeups. Returns -EINVAL |
| * upon error or 0 upon success. |
| */ |
| static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) |
| { |
| if (!oh->class->sysc || |
| !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) || |
| (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) || |
| (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP))) |
| return -EINVAL; |
| |
| if (!oh->class->sysc->sysc_fields) { |
| WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); |
| return -EINVAL; |
| } |
| |
| if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) |
| *v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift); |
| |
| if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) |
| _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); |
| if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) |
| _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); |
| |
| /* XXX test pwrdm_get_wken for this hwmod's subsystem */ |
| |
| return 0; |
| } |
| |
| static struct clockdomain *_get_clkdm(struct omap_hwmod *oh) |
| { |
| struct clk_hw_omap *clk; |
| |
| if (oh->clkdm) { |
| return oh->clkdm; |
| } else if (oh->_clk) { |
| if (__clk_get_flags(oh->_clk) & CLK_IS_BASIC) |
| return NULL; |
| clk = to_clk_hw_omap(__clk_get_hw(oh->_clk)); |
| return clk->clkdm; |
| } |
| return NULL; |
| } |
| |
| /** |
| * _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active |
| * @oh: struct omap_hwmod * |
| * |
| * Prevent the hardware module @oh from entering idle while the |
| * hardare module initiator @init_oh is active. Useful when a module |
| * will be accessed by a particular initiator (e.g., if a module will |
| * be accessed by the IVA, there should be a sleepdep between the IVA |
| * initiator and the module). Only applies to modules in smart-idle |
| * mode. If the clockdomain is marked as not needing autodeps, return |
| * 0 without doing anything. Otherwise, returns -EINVAL upon error or |
| * passes along clkdm_add_sleepdep() value upon success. |
| */ |
| static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) |
| { |
| struct clockdomain *clkdm, *init_clkdm; |
| |
| clkdm = _get_clkdm(oh); |
| init_clkdm = _get_clkdm(init_oh); |
| |
| if (!clkdm || !init_clkdm) |
| return -EINVAL; |
| |
| if (clkdm && clkdm->flags & CLKDM_NO_AUTODEPS) |
| return 0; |
| |
| return clkdm_add_sleepdep(clkdm, init_clkdm); |
| } |
| |
| /** |
| * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active |
| * @oh: struct omap_hwmod * |
| * |
| * Allow the hardware module @oh to enter idle while the hardare |
| * module initiator @init_oh is active. Useful when a module will not |
| * be accessed by a particular initiator (e.g., if a module will not |
| * be accessed by the IVA, there should be no sleepdep between the IVA |
| * initiator and the module). Only applies to modules in smart-idle |
| * mode. If the clockdomain is marked as not needing autodeps, return |
| * 0 without doing anything. Returns -EINVAL upon error or passes |
| * along clkdm_del_sleepdep() value upon success. |
| */ |
| static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) |
| { |
| struct clockdomain *clkdm, *init_clkdm; |
| |
| clkdm = _get_clkdm(oh); |
| init_clkdm = _get_clkdm(init_oh); |
| |
| if (!clkdm || !init_clkdm) |
| return -EINVAL; |
| |
| if (clkdm && clkdm->flags & CLKDM_NO_AUTODEPS) |
| return 0; |
| |
| return clkdm_del_sleepdep(clkdm, init_clkdm); |
| } |
| |
| /** |
| * _init_main_clk - get a struct clk * for the the hwmod's main functional clk |
| * @oh: struct omap_hwmod * |
| * |
| * Called from _init_clocks(). Populates the @oh _clk (main |
| * functional clock pointer) if a main_clk is present. Returns 0 on |
| * success or -EINVAL on error. |
| */ |
| static int _init_main_clk(struct omap_hwmod *oh) |
| { |
| int ret = 0; |
| |
| if (!oh->main_clk) |
| return 0; |
| |
| oh->_clk = clk_get(NULL, oh->main_clk); |
| if (IS_ERR(oh->_clk)) { |
| pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n", |
| oh->name, oh->main_clk); |
| return -EINVAL; |
| } |
| /* |
| * HACK: This needs a re-visit once clk_prepare() is implemented |
| * to do something meaningful. Today its just a no-op. |
| * If clk_prepare() is used at some point to do things like |
| * voltage scaling etc, then this would have to be moved to |
| * some point where subsystems like i2c and pmic become |
| * available. |
| */ |
| clk_prepare(oh->_clk); |
| |
| if (!_get_clkdm(oh)) |
| pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n", |
| oh->name, oh->main_clk); |
| |
| return ret; |
| } |
| |
| /** |
| * _init_interface_clks - get a struct clk * for the the hwmod's interface clks |
| * @oh: struct omap_hwmod * |
| * |
| * Called from _init_clocks(). Populates the @oh OCP slave interface |
| * clock pointers. Returns 0 on success or -EINVAL on error. |
| */ |
| static int _init_interface_clks(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_ocp_if *os; |
| struct list_head *p; |
| struct clk *c; |
| int i = 0; |
| int ret = 0; |
| |
| p = oh->slave_ports.next; |
| |
| while (i < oh->slaves_cnt) { |
| os = _fetch_next_ocp_if(&p, &i); |
| if (!os->clk) |
| continue; |
| |
| c = clk_get(NULL, os->clk); |
| if (IS_ERR(c)) { |
| pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", |
| oh->name, os->clk); |
| ret = -EINVAL; |
| continue; |
| } |
| os->_clk = c; |
| /* |
| * HACK: This needs a re-visit once clk_prepare() is implemented |
| * to do something meaningful. Today its just a no-op. |
| * If clk_prepare() is used at some point to do things like |
| * voltage scaling etc, then this would have to be moved to |
| * some point where subsystems like i2c and pmic become |
| * available. |
| */ |
| clk_prepare(os->_clk); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks |
| * @oh: struct omap_hwmod * |
| * |
| * Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk |
| * clock pointers. Returns 0 on success or -EINVAL on error. |
| */ |
| static int _init_opt_clks(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_opt_clk *oc; |
| struct clk *c; |
| int i; |
| int ret = 0; |
| |
| for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) { |
| c = clk_get(NULL, oc->clk); |
| if (IS_ERR(c)) { |
| pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", |
| oh->name, oc->clk); |
| ret = -EINVAL; |
| continue; |
| } |
| oc->_clk = c; |
| /* |
| * HACK: This needs a re-visit once clk_prepare() is implemented |
| * to do something meaningful. Today its just a no-op. |
| * If clk_prepare() is used at some point to do things like |
| * voltage scaling etc, then this would have to be moved to |
| * some point where subsystems like i2c and pmic become |
| * available. |
| */ |
| clk_prepare(oc->_clk); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * _enable_clocks - enable hwmod main clock and interface clocks |
| * @oh: struct omap_hwmod * |
| * |
| * Enables all clocks necessary for register reads and writes to succeed |
| * on the hwmod @oh. Returns 0. |
| */ |
| static int _enable_clocks(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_ocp_if *os; |
| struct list_head *p; |
| int i = 0; |
| |
| pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name); |
| |
| if (oh->_clk) |
| clk_enable(oh->_clk); |
| |
| p = oh->slave_ports.next; |
| |
| while (i < oh->slaves_cnt) { |
| os = _fetch_next_ocp_if(&p, &i); |
| |
| if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) |
| clk_enable(os->_clk); |
| } |
| |
| /* The opt clocks are controlled by the device driver. */ |
| |
| return 0; |
| } |
| |
| /** |
| * _disable_clocks - disable hwmod main clock and interface clocks |
| * @oh: struct omap_hwmod * |
| * |
| * Disables the hwmod @oh main functional and interface clocks. Returns 0. |
| */ |
| static int _disable_clocks(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_ocp_if *os; |
| struct list_head *p; |
| int i = 0; |
| |
| pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name); |
| |
| if (oh->_clk) |
| clk_disable(oh->_clk); |
| |
| p = oh->slave_ports.next; |
| |
| while (i < oh->slaves_cnt) { |
| os = _fetch_next_ocp_if(&p, &i); |
| |
| if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) |
| clk_disable(os->_clk); |
| } |
| |
| /* The opt clocks are controlled by the device driver. */ |
| |
| return 0; |
| } |
| |
| static void _enable_optional_clocks(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_opt_clk *oc; |
| int i; |
| |
| pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name); |
| |
| for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) |
| if (oc->_clk) { |
| pr_debug("omap_hwmod: enable %s:%s\n", oc->role, |
| __clk_get_name(oc->_clk)); |
| clk_enable(oc->_clk); |
| } |
| } |
| |
| static void _disable_optional_clocks(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_opt_clk *oc; |
| int i; |
| |
| pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name); |
| |
| for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) |
| if (oc->_clk) { |
| pr_debug("omap_hwmod: disable %s:%s\n", oc->role, |
| __clk_get_name(oc->_clk)); |
| clk_disable(oc->_clk); |
| } |
| } |
| |
| /** |
| * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4 |
| * @oh: struct omap_hwmod * |
| * |
| * Enables the PRCM module mode related to the hwmod @oh. |
| * No return value. |
| */ |
| static void _omap4_enable_module(struct omap_hwmod *oh) |
| { |
| if (!oh->clkdm || !oh->prcm.omap4.modulemode) |
| return; |
| |
| pr_debug("omap_hwmod: %s: %s: %d\n", |
| oh->name, __func__, oh->prcm.omap4.modulemode); |
| |
| omap4_cminst_module_enable(oh->prcm.omap4.modulemode, |
| oh->clkdm->prcm_partition, |
| oh->clkdm->cm_inst, |
| oh->clkdm->clkdm_offs, |
| oh->prcm.omap4.clkctrl_offs); |
| } |
| |
| /** |
| * _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX |
| * @oh: struct omap_hwmod * |
| * |
| * Enables the PRCM module mode related to the hwmod @oh. |
| * No return value. |
| */ |
| static void _am33xx_enable_module(struct omap_hwmod *oh) |
| { |
| if (!oh->clkdm || !oh->prcm.omap4.modulemode) |
| return; |
| |
| pr_debug("omap_hwmod: %s: %s: %d\n", |
| oh->name, __func__, oh->prcm.omap4.modulemode); |
| |
| am33xx_cm_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->cm_inst, |
| oh->clkdm->clkdm_offs, |
| oh->prcm.omap4.clkctrl_offs); |
| } |
| |
| /** |
| * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4 |
| * @oh: struct omap_hwmod * |
| * |
| * Wait for a module @oh to enter slave idle. Returns 0 if the module |
| * does not have an IDLEST bit or if the module successfully enters |
| * slave idle; otherwise, pass along the return value of the |
| * appropriate *_cm*_wait_module_idle() function. |
| */ |
| static int _omap4_wait_target_disable(struct omap_hwmod *oh) |
| { |
| if (!oh) |
| return -EINVAL; |
| |
| if (oh->_int_flags & _HWMOD_NO_MPU_PORT || !oh->clkdm) |
| return 0; |
| |
| if (oh->flags & HWMOD_NO_IDLEST) |
| return 0; |
| |
| return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition, |
| oh->clkdm->cm_inst, |
| oh->clkdm->clkdm_offs, |
| oh->prcm.omap4.clkctrl_offs); |
| } |
| |
| /** |
| * _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX |
| * @oh: struct omap_hwmod * |
| * |
| * Wait for a module @oh to enter slave idle. Returns 0 if the module |
| * does not have an IDLEST bit or if the module successfully enters |
| * slave idle; otherwise, pass along the return value of the |
| * appropriate *_cm*_wait_module_idle() function. |
| */ |
| static int _am33xx_wait_target_disable(struct omap_hwmod *oh) |
| { |
| if (!oh) |
| return -EINVAL; |
| |
| if (oh->_int_flags & _HWMOD_NO_MPU_PORT) |
| return 0; |
| |
| if (oh->flags & HWMOD_NO_IDLEST) |
| return 0; |
| |
| return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst, |
| oh->clkdm->clkdm_offs, |
| oh->prcm.omap4.clkctrl_offs); |
| } |
| |
| /** |
| * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh |
| * @oh: struct omap_hwmod *oh |
| * |
| * Count and return the number of MPU IRQs associated with the hwmod |
| * @oh. Used to allocate struct resource data. Returns 0 if @oh is |
| * NULL. |
| */ |
| static int _count_mpu_irqs(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_irq_info *ohii; |
| int i = 0; |
| |
| if (!oh || !oh->mpu_irqs) |
| return 0; |
| |
| do { |
| ohii = &oh->mpu_irqs[i++]; |
| } while (ohii->irq != -1); |
| |
| return i-1; |
| } |
| |
| /** |
| * _count_sdma_reqs - count the number of SDMA request lines associated with @oh |
| * @oh: struct omap_hwmod *oh |
| * |
| * Count and return the number of SDMA request lines associated with |
| * the hwmod @oh. Used to allocate struct resource data. Returns 0 |
| * if @oh is NULL. |
| */ |
| static int _count_sdma_reqs(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_dma_info *ohdi; |
| int i = 0; |
| |
| if (!oh || !oh->sdma_reqs) |
| return 0; |
| |
| do { |
| ohdi = &oh->sdma_reqs[i++]; |
| } while (ohdi->dma_req != -1); |
| |
| return i-1; |
| } |
| |
| /** |
| * _count_ocp_if_addr_spaces - count the number of address space entries for @oh |
| * @oh: struct omap_hwmod *oh |
| * |
| * Count and return the number of address space ranges associated with |
| * the hwmod @oh. Used to allocate struct resource data. Returns 0 |
| * if @oh is NULL. |
| */ |
| static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os) |
| { |
| struct omap_hwmod_addr_space *mem; |
| int i = 0; |
| |
| if (!os || !os->addr) |
| return 0; |
| |
| do { |
| mem = &os->addr[i++]; |
| } while (mem->pa_start != mem->pa_end); |
| |
| return i-1; |
| } |
| |
| /** |
| * _get_mpu_irq_by_name - fetch MPU interrupt line number by name |
| * @oh: struct omap_hwmod * to operate on |
| * @name: pointer to the name of the MPU interrupt number to fetch (optional) |
| * @irq: pointer to an unsigned int to store the MPU IRQ number to |
| * |
| * Retrieve a MPU hardware IRQ line number named by @name associated |
| * with the IP block pointed to by @oh. The IRQ number will be filled |
| * into the address pointed to by @dma. When @name is non-null, the |
| * IRQ line number associated with the named entry will be returned. |
| * If @name is null, the first matching entry will be returned. Data |
| * order is not meaningful in hwmod data, so callers are strongly |
| * encouraged to use a non-null @name whenever possible to avoid |
| * unpredictable effects if hwmod data is later added that causes data |
| * ordering to change. Returns 0 upon success or a negative error |
| * code upon error. |
| */ |
| static int _get_mpu_irq_by_name(struct omap_hwmod *oh, const char *name, |
| unsigned int *irq) |
| { |
| int i; |
| bool found = false; |
| |
| if (!oh->mpu_irqs) |
| return -ENOENT; |
| |
| i = 0; |
| while (oh->mpu_irqs[i].irq != -1) { |
| if (name == oh->mpu_irqs[i].name || |
| !strcmp(name, oh->mpu_irqs[i].name)) { |
| found = true; |
| break; |
| } |
| i++; |
| } |
| |
| if (!found) |
| return -ENOENT; |
| |
| *irq = oh->mpu_irqs[i].irq; |
| |
| return 0; |
| } |
| |
| /** |
| * _get_sdma_req_by_name - fetch SDMA request line ID by name |
| * @oh: struct omap_hwmod * to operate on |
| * @name: pointer to the name of the SDMA request line to fetch (optional) |
| * @dma: pointer to an unsigned int to store the request line ID to |
| * |
| * Retrieve an SDMA request line ID named by @name on the IP block |
| * pointed to by @oh. The ID will be filled into the address pointed |
| * to by @dma. When @name is non-null, the request line ID associated |
| * with the named entry will be returned. If @name is null, the first |
| * matching entry will be returned. Data order is not meaningful in |
| * hwmod data, so callers are strongly encouraged to use a non-null |
| * @name whenever possible to avoid unpredictable effects if hwmod |
| * data is later added that causes data ordering to change. Returns 0 |
| * upon success or a negative error code upon error. |
| */ |
| static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name, |
| unsigned int *dma) |
| { |
| int i; |
| bool found = false; |
| |
| if (!oh->sdma_reqs) |
| return -ENOENT; |
| |
| i = 0; |
| while (oh->sdma_reqs[i].dma_req != -1) { |
| if (name == oh->sdma_reqs[i].name || |
| !strcmp(name, oh->sdma_reqs[i].name)) { |
| found = true; |
| break; |
| } |
| i++; |
| } |
| |
| if (!found) |
| return -ENOENT; |
| |
| *dma = oh->sdma_reqs[i].dma_req; |
| |
| return 0; |
| } |
| |
| /** |
| * _get_addr_space_by_name - fetch address space start & end by name |
| * @oh: struct omap_hwmod * to operate on |
| * @name: pointer to the name of the address space to fetch (optional) |
| * @pa_start: pointer to a u32 to store the starting address to |
| * @pa_end: pointer to a u32 to store the ending address to |
| * |
| * Retrieve address space start and end addresses for the IP block |
| * pointed to by @oh. The data will be filled into the addresses |
| * pointed to by @pa_start and @pa_end. When @name is non-null, the |
| * address space data associated with the named entry will be |
| * returned. If @name is null, the first matching entry will be |
| * returned. Data order is not meaningful in hwmod data, so callers |
| * are strongly encouraged to use a non-null @name whenever possible |
| * to avoid unpredictable effects if hwmod data is later added that |
| * causes data ordering to change. Returns 0 upon success or a |
| * negative error code upon error. |
| */ |
| static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name, |
| u32 *pa_start, u32 *pa_end) |
| { |
| int i, j; |
| struct omap_hwmod_ocp_if *os; |
| struct list_head *p = NULL; |
| bool found = false; |
| |
| p = oh->slave_ports.next; |
| |
| i = 0; |
| while (i < oh->slaves_cnt) { |
| os = _fetch_next_ocp_if(&p, &i); |
| |
| if (!os->addr) |
| return -ENOENT; |
| |
| j = 0; |
| while (os->addr[j].pa_start != os->addr[j].pa_end) { |
| if (name == os->addr[j].name || |
| !strcmp(name, os->addr[j].name)) { |
| found = true; |
| break; |
| } |
| j++; |
| } |
| |
| if (found) |
| break; |
| } |
| |
| if (!found) |
| return -ENOENT; |
| |
| *pa_start = os->addr[j].pa_start; |
| *pa_end = os->addr[j].pa_end; |
| |
| return 0; |
| } |
| |
| /** |
| * _save_mpu_port_index - find and save the index to @oh's MPU port |
| * @oh: struct omap_hwmod * |
| * |
| * Determines the array index of the OCP slave port that the MPU uses |
| * to address the device, and saves it into the struct omap_hwmod. |
| * Intended to be called during hwmod registration only. No return |
| * value. |
| */ |
| static void __init _save_mpu_port_index(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_ocp_if *os = NULL; |
| struct list_head *p; |
| int i = 0; |
| |
| if (!oh) |
| return; |
| |
| oh->_int_flags |= _HWMOD_NO_MPU_PORT; |
| |
| p = oh->slave_ports.next; |
| |
| while (i < oh->slaves_cnt) { |
| os = _fetch_next_ocp_if(&p, &i); |
| if (os->user & OCP_USER_MPU) { |
| oh->_mpu_port = os; |
| oh->_int_flags &= ~_HWMOD_NO_MPU_PORT; |
| break; |
| } |
| } |
| |
| return; |
| } |
| |
| /** |
| * _find_mpu_rt_port - return omap_hwmod_ocp_if accessible by the MPU |
| * @oh: struct omap_hwmod * |
| * |
| * Given a pointer to a struct omap_hwmod record @oh, return a pointer |
| * to the struct omap_hwmod_ocp_if record that is used by the MPU to |
| * communicate with the IP block. This interface need not be directly |
| * connected to the MPU (and almost certainly is not), but is directly |
| * connected to the IP block represented by @oh. Returns a pointer |
| * to the struct omap_hwmod_ocp_if * upon success, or returns NULL upon |
| * error or if there does not appear to be a path from the MPU to this |
| * IP block. |
| */ |
| static struct omap_hwmod_ocp_if *_find_mpu_rt_port(struct omap_hwmod *oh) |
| { |
| if (!oh || oh->_int_flags & _HWMOD_NO_MPU_PORT || oh->slaves_cnt == 0) |
| return NULL; |
| |
| return oh->_mpu_port; |
| }; |
| |
| /** |
| * _find_mpu_rt_addr_space - return MPU register target address space for @oh |
| * @oh: struct omap_hwmod * |
| * |
| * Returns a pointer to the struct omap_hwmod_addr_space record representing |
| * the register target MPU address space; or returns NULL upon error. |
| */ |
| static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_ocp_if *os; |
| struct omap_hwmod_addr_space *mem; |
| int found = 0, i = 0; |
| |
| os = _find_mpu_rt_port(oh); |
| if (!os || !os->addr) |
| return NULL; |
| |
| do { |
| mem = &os->addr[i++]; |
| if (mem->flags & ADDR_TYPE_RT) |
| found = 1; |
| } while (!found && mem->pa_start != mem->pa_end); |
| |
| return (found) ? mem : NULL; |
| } |
| |
| /** |
| * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG |
| * @oh: struct omap_hwmod * |
| * |
| * Ensure that the OCP_SYSCONFIG register for the IP block represented |
| * by @oh is set to indicate to the PRCM that the IP block is active. |
| * Usually this means placing the module into smart-idle mode and |
| * smart-standby, but if there is a bug in the automatic idle handling |
| * for the IP block, it may need to be placed into the force-idle or |
| * no-idle variants of these modes. No return value. |
| */ |
| static void _enable_sysc(struct omap_hwmod *oh) |
| { |
| u8 idlemode, sf; |
| u32 v; |
| bool clkdm_act; |
| struct clockdomain *clkdm; |
| |
| if (!oh->class->sysc) |
| return; |
| |
| /* |
| * Wait until reset has completed, this is needed as the IP |
| * block is reset automatically by hardware in some cases |
| * (off-mode for example), and the drivers require the |
| * IP to be ready when they access it |
| */ |
| if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) |
| _enable_optional_clocks(oh); |
| _wait_softreset_complete(oh); |
| if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) |
| _disable_optional_clocks(oh); |
| |
| v = oh->_sysc_cache; |
| sf = oh->class->sysc->sysc_flags; |
| |
| clkdm = _get_clkdm(oh); |
| if (sf & SYSC_HAS_SIDLEMODE) { |
| if (oh->flags & HWMOD_SWSUP_SIDLE || |
| oh->flags & HWMOD_SWSUP_SIDLE_ACT) { |
| idlemode = HWMOD_IDLEMODE_NO; |
| } else { |
| if (sf & SYSC_HAS_ENAWAKEUP) |
| _enable_wakeup(oh, &v); |
| if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) |
| idlemode = HWMOD_IDLEMODE_SMART_WKUP; |
| else |
| idlemode = HWMOD_IDLEMODE_SMART; |
| } |
| |
| /* |
| * This is special handling for some IPs like |
| * 32k sync timer. Force them to idle! |
| */ |
| clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); |
| if (clkdm_act && !(oh->class->sysc->idlemodes & |
| (SIDLE_SMART | SIDLE_SMART_WKUP))) |
| idlemode = HWMOD_IDLEMODE_FORCE; |
| |
| _set_slave_idlemode(oh, idlemode, &v); |
| } |
| |
| if (sf & SYSC_HAS_MIDLEMODE) { |
| if (oh->flags & HWMOD_FORCE_MSTANDBY) { |
| idlemode = HWMOD_IDLEMODE_FORCE; |
| } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) { |
| idlemode = HWMOD_IDLEMODE_NO; |
| } else { |
| if (sf & SYSC_HAS_ENAWAKEUP) |
| _enable_wakeup(oh, &v); |
| if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) |
| idlemode = HWMOD_IDLEMODE_SMART_WKUP; |
| else |
| idlemode = HWMOD_IDLEMODE_SMART; |
| } |
| _set_master_standbymode(oh, idlemode, &v); |
| } |
| |
| /* |
| * XXX The clock framework should handle this, by |
| * calling into this code. But this must wait until the |
| * clock structures are tagged with omap_hwmod entries |
| */ |
| if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) && |
| (sf & SYSC_HAS_CLOCKACTIVITY)) |
| _set_clockactivity(oh, oh->class->sysc->clockact, &v); |
| |
| /* If the cached value is the same as the new value, skip the write */ |
| if (oh->_sysc_cache != v) |
| _write_sysconfig(v, oh); |
| |
| /* |
| * Set the autoidle bit only after setting the smartidle bit |
| * Setting this will not have any impact on the other modules. |
| */ |
| if (sf & SYSC_HAS_AUTOIDLE) { |
| idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ? |
| 0 : 1; |
| _set_module_autoidle(oh, idlemode, &v); |
| _write_sysconfig(v, oh); |
| } |
| } |
| |
| /** |
| * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG |
| * @oh: struct omap_hwmod * |
| * |
| * If module is marked as SWSUP_SIDLE, force the module into slave |
| * idle; otherwise, configure it for smart-idle. If module is marked |
| * as SWSUP_MSUSPEND, force the module into master standby; otherwise, |
| * configure it for smart-standby. No return value. |
| */ |
| static void _idle_sysc(struct omap_hwmod *oh) |
| { |
| u8 idlemode, sf; |
| u32 v; |
| |
| if (!oh->class->sysc) |
| return; |
| |
| v = oh->_sysc_cache; |
| sf = oh->class->sysc->sysc_flags; |
| |
| if (sf & SYSC_HAS_SIDLEMODE) { |
| if (oh->flags & HWMOD_SWSUP_SIDLE) { |
| idlemode = HWMOD_IDLEMODE_FORCE; |
| } else { |
| if (sf & SYSC_HAS_ENAWAKEUP) |
| _enable_wakeup(oh, &v); |
| if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) |
| idlemode = HWMOD_IDLEMODE_SMART_WKUP; |
| else |
| idlemode = HWMOD_IDLEMODE_SMART; |
| } |
| _set_slave_idlemode(oh, idlemode, &v); |
| } |
| |
| if (sf & SYSC_HAS_MIDLEMODE) { |
| if ((oh->flags & HWMOD_SWSUP_MSTANDBY) || |
| (oh->flags & HWMOD_FORCE_MSTANDBY)) { |
| idlemode = HWMOD_IDLEMODE_FORCE; |
| } else { |
| if (sf & SYSC_HAS_ENAWAKEUP) |
| _enable_wakeup(oh, &v); |
| if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) |
| idlemode = HWMOD_IDLEMODE_SMART_WKUP; |
| else |
| idlemode = HWMOD_IDLEMODE_SMART; |
| } |
| _set_master_standbymode(oh, idlemode, &v); |
| } |
| |
| _write_sysconfig(v, oh); |
| } |
| |
| /** |
| * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG |
| * @oh: struct omap_hwmod * |
| * |
| * Force the module into slave idle and master suspend. No return |
| * value. |
| */ |
| static void _shutdown_sysc(struct omap_hwmod *oh) |
| { |
| u32 v; |
| u8 sf; |
| |
| if (!oh->class->sysc) |
| return; |
| |
| v = oh->_sysc_cache; |
| sf = oh->class->sysc->sysc_flags; |
| |
| if (sf & SYSC_HAS_SIDLEMODE) |
| _set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v); |
| |
| if (sf & SYSC_HAS_MIDLEMODE) |
| _set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v); |
| |
| if (sf & SYSC_HAS_AUTOIDLE) |
| _set_module_autoidle(oh, 1, &v); |
| |
| _write_sysconfig(v, oh); |
| } |
| |
| /** |
| * _lookup - find an omap_hwmod by name |
| * @name: find an omap_hwmod by name |
| * |
| * Return a pointer to an omap_hwmod by name, or NULL if not found. |
| */ |
| static struct omap_hwmod *_lookup(const char *name) |
| { |
| struct omap_hwmod *oh, *temp_oh; |
| |
| oh = NULL; |
| |
| list_for_each_entry(temp_oh, &omap_hwmod_list, node) { |
| if (!strcmp(name, temp_oh->name)) { |
| oh = temp_oh; |
| break; |
| } |
| } |
| |
| return oh; |
| } |
| |
| /** |
| * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Convert a clockdomain name stored in a struct omap_hwmod into a |
| * clockdomain pointer, and save it into the struct omap_hwmod. |
| * Return -EINVAL if the clkdm_name lookup failed. |
| */ |
| static int _init_clkdm(struct omap_hwmod *oh) |
| { |
| if (!oh->clkdm_name) { |
| pr_debug("omap_hwmod: %s: missing clockdomain\n", oh->name); |
| return 0; |
| } |
| |
| oh->clkdm = clkdm_lookup(oh->clkdm_name); |
| if (!oh->clkdm) { |
| pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n", |
| oh->name, oh->clkdm_name); |
| return 0; |
| } |
| |
| pr_debug("omap_hwmod: %s: associated to clkdm %s\n", |
| oh->name, oh->clkdm_name); |
| |
| return 0; |
| } |
| |
| /** |
| * _init_clocks - clk_get() all clocks associated with this hwmod. Retrieve as |
| * well the clockdomain. |
| * @oh: struct omap_hwmod * |
| * @data: not used; pass NULL |
| * |
| * Called by omap_hwmod_setup_*() (after omap2_clk_init()). |
| * Resolves all clock names embedded in the hwmod. Returns 0 on |
| * success, or a negative error code on failure. |
| */ |
| static int _init_clocks(struct omap_hwmod *oh, void *data) |
| { |
| int ret = 0; |
| |
| if (oh->_state != _HWMOD_STATE_REGISTERED) |
| return 0; |
| |
| pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name); |
| |
| if (soc_ops.init_clkdm) |
| ret |= soc_ops.init_clkdm(oh); |
| |
| ret |= _init_main_clk(oh); |
| ret |= _init_interface_clks(oh); |
| ret |= _init_opt_clks(oh); |
| |
| if (!ret) |
| oh->_state = _HWMOD_STATE_CLKS_INITED; |
| else |
| pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name); |
| |
| return ret; |
| } |
| |
| /** |
| * _lookup_hardreset - fill register bit info for this hwmod/reset line |
| * @oh: struct omap_hwmod * |
| * @name: name of the reset line in the context of this hwmod |
| * @ohri: struct omap_hwmod_rst_info * that this function will fill in |
| * |
| * Return the bit position of the reset line that match the |
| * input name. Return -ENOENT if not found. |
| */ |
| static int _lookup_hardreset(struct omap_hwmod *oh, const char *name, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| int i; |
| |
| for (i = 0; i < oh->rst_lines_cnt; i++) { |
| const char *rst_line = oh->rst_lines[i].name; |
| if (!strcmp(rst_line, name)) { |
| ohri->rst_shift = oh->rst_lines[i].rst_shift; |
| ohri->st_shift = oh->rst_lines[i].st_shift; |
| pr_debug("omap_hwmod: %s: %s: %s: rst %d st %d\n", |
| oh->name, __func__, rst_line, ohri->rst_shift, |
| ohri->st_shift); |
| |
| return 0; |
| } |
| } |
| |
| return -ENOENT; |
| } |
| |
| /** |
| * _assert_hardreset - assert the HW reset line of submodules |
| * contained in the hwmod module. |
| * @oh: struct omap_hwmod * |
| * @name: name of the reset line to lookup and assert |
| * |
| * Some IP like dsp, ipu or iva contain processor that require an HW |
| * reset line to be assert / deassert in order to enable fully the IP. |
| * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of |
| * asserting the hardreset line on the currently-booted SoC, or passes |
| * along the return value from _lookup_hardreset() or the SoC's |
| * assert_hardreset code. |
| */ |
| static int _assert_hardreset(struct omap_hwmod *oh, const char *name) |
| { |
| struct omap_hwmod_rst_info ohri; |
| int ret = -EINVAL; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| if (!soc_ops.assert_hardreset) |
| return -ENOSYS; |
| |
| ret = _lookup_hardreset(oh, name, &ohri); |
| if (ret < 0) |
| return ret; |
| |
| ret = soc_ops.assert_hardreset(oh, &ohri); |
| |
| return ret; |
| } |
| |
| /** |
| * _deassert_hardreset - deassert the HW reset line of submodules contained |
| * in the hwmod module. |
| * @oh: struct omap_hwmod * |
| * @name: name of the reset line to look up and deassert |
| * |
| * Some IP like dsp, ipu or iva contain processor that require an HW |
| * reset line to be assert / deassert in order to enable fully the IP. |
| * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of |
| * deasserting the hardreset line on the currently-booted SoC, or passes |
| * along the return value from _lookup_hardreset() or the SoC's |
| * deassert_hardreset code. |
| */ |
| static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) |
| { |
| struct omap_hwmod_rst_info ohri; |
| int ret = -EINVAL; |
| int hwsup = 0; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| if (!soc_ops.deassert_hardreset) |
| return -ENOSYS; |
| |
| ret = _lookup_hardreset(oh, name, &ohri); |
| if (ret < 0) |
| return ret; |
| |
| if (oh->clkdm) { |
| /* |
| * A clockdomain must be in SW_SUP otherwise reset |
| * might not be completed. The clockdomain can be set |
| * in HW_AUTO only when the module become ready. |
| */ |
| hwsup = clkdm_in_hwsup(oh->clkdm); |
| ret = clkdm_hwmod_enable(oh->clkdm, oh); |
| if (ret) { |
| WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", |
| oh->name, oh->clkdm->name, ret); |
| return ret; |
| } |
| } |
| |
| _enable_clocks(oh); |
| if (soc_ops.enable_module) |
| soc_ops.enable_module(oh); |
| |
| ret = soc_ops.deassert_hardreset(oh, &ohri); |
| |
| if (soc_ops.disable_module) |
| soc_ops.disable_module(oh); |
| _disable_clocks(oh); |
| |
| if (ret == -EBUSY) |
| pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); |
| |
| if (!ret) { |
| /* |
| * Set the clockdomain to HW_AUTO, assuming that the |
| * previous state was HW_AUTO. |
| */ |
| if (oh->clkdm && hwsup) |
| clkdm_allow_idle(oh->clkdm); |
| } else { |
| if (oh->clkdm) |
| clkdm_hwmod_disable(oh->clkdm, oh); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * _read_hardreset - read the HW reset line state of submodules |
| * contained in the hwmod module |
| * @oh: struct omap_hwmod * |
| * @name: name of the reset line to look up and read |
| * |
| * Return the state of the reset line. Returns -EINVAL if @oh is |
| * null, -ENOSYS if we have no way of reading the hardreset line |
| * status on the currently-booted SoC, or passes along the return |
| * value from _lookup_hardreset() or the SoC's is_hardreset_asserted |
| * code. |
| */ |
| static int _read_hardreset(struct omap_hwmod *oh, const char *name) |
| { |
| struct omap_hwmod_rst_info ohri; |
| int ret = -EINVAL; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| if (!soc_ops.is_hardreset_asserted) |
| return -ENOSYS; |
| |
| ret = _lookup_hardreset(oh, name, &ohri); |
| if (ret < 0) |
| return ret; |
| |
| return soc_ops.is_hardreset_asserted(oh, &ohri); |
| } |
| |
| /** |
| * _are_all_hardreset_lines_asserted - return true if the @oh is hard-reset |
| * @oh: struct omap_hwmod * |
| * |
| * If all hardreset lines associated with @oh are asserted, then return true. |
| * Otherwise, if part of @oh is out hardreset or if no hardreset lines |
| * associated with @oh are asserted, then return false. |
| * This function is used to avoid executing some parts of the IP block |
| * enable/disable sequence if its hardreset line is set. |
| */ |
| static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh) |
| { |
| int i, rst_cnt = 0; |
| |
| if (oh->rst_lines_cnt == 0) |
| return false; |
| |
| for (i = 0; i < oh->rst_lines_cnt; i++) |
| if (_read_hardreset(oh, oh->rst_lines[i].name) > 0) |
| rst_cnt++; |
| |
| if (oh->rst_lines_cnt == rst_cnt) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * _are_any_hardreset_lines_asserted - return true if any part of @oh is |
| * hard-reset |
| * @oh: struct omap_hwmod * |
| * |
| * If any hardreset lines associated with @oh are asserted, then |
| * return true. Otherwise, if no hardreset lines associated with @oh |
| * are asserted, or if @oh has no hardreset lines, then return false. |
| * This function is used to avoid executing some parts of the IP block |
| * enable/disable sequence if any hardreset line is set. |
| */ |
| static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh) |
| { |
| int rst_cnt = 0; |
| int i; |
| |
| for (i = 0; i < oh->rst_lines_cnt && rst_cnt == 0; i++) |
| if (_read_hardreset(oh, oh->rst_lines[i].name) > 0) |
| rst_cnt++; |
| |
| return (rst_cnt) ? true : false; |
| } |
| |
| /** |
| * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 |
| * @oh: struct omap_hwmod * |
| * |
| * Disable the PRCM module mode related to the hwmod @oh. |
| * Return EINVAL if the modulemode is not supported and 0 in case of success. |
| */ |
| static int _omap4_disable_module(struct omap_hwmod *oh) |
| { |
| int v; |
| |
| if (!oh->clkdm || !oh->prcm.omap4.modulemode) |
| return -EINVAL; |
| |
| /* |
| * Since integration code might still be doing something, only |
| * disable if all lines are under hardreset. |
| */ |
| if (_are_any_hardreset_lines_asserted(oh)) |
| return 0; |
| |
| pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); |
| |
| omap4_cminst_module_disable(oh->clkdm->prcm_partition, |
| oh->clkdm->cm_inst, |
| oh->clkdm->clkdm_offs, |
| oh->prcm.omap4.clkctrl_offs); |
| |
| v = _omap4_wait_target_disable(oh); |
| if (v) |
| pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", |
| oh->name); |
| |
| return 0; |
| } |
| |
| /** |
| * _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX |
| * @oh: struct omap_hwmod * |
| * |
| * Disable the PRCM module mode related to the hwmod @oh. |
| * Return EINVAL if the modulemode is not supported and 0 in case of success. |
| */ |
| static int _am33xx_disable_module(struct omap_hwmod *oh) |
| { |
| int v; |
| |
| if (!oh->clkdm || !oh->prcm.omap4.modulemode) |
| return -EINVAL; |
| |
| pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); |
| |
| if (_are_any_hardreset_lines_asserted(oh)) |
| return 0; |
| |
| am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, |
| oh->prcm.omap4.clkctrl_offs); |
| |
| v = _am33xx_wait_target_disable(oh); |
| if (v) |
| pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", |
| oh->name); |
| |
| return 0; |
| } |
| |
| /** |
| * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit |
| * @oh: struct omap_hwmod * |
| * |
| * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be |
| * enabled for this to work. Returns -ENOENT if the hwmod cannot be |
| * reset this way, -EINVAL if the hwmod is in the wrong state, |
| * -ETIMEDOUT if the module did not reset in time, or 0 upon success. |
| * |
| * In OMAP3 a specific SYSSTATUS register is used to get the reset status. |
| * Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead |
| * use the SYSCONFIG softreset bit to provide the status. |
| * |
| * Note that some IP like McBSP do have reset control but don't have |
| * reset status. |
| */ |
| static int _ocp_softreset(struct omap_hwmod *oh) |
| { |
| u32 v; |
| int c = 0; |
| int ret = 0; |
| |
| if (!oh->class->sysc || |
| !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) |
| return -ENOENT; |
| |
| /* clocks must be on for this operation */ |
| if (oh->_state != _HWMOD_STATE_ENABLED) { |
| pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n", |
| oh->name); |
| return -EINVAL; |
| } |
| |
| /* For some modules, all optionnal clocks need to be enabled as well */ |
| if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) |
| _enable_optional_clocks(oh); |
| |
| pr_debug("omap_hwmod: %s: resetting via OCP SOFTRESET\n", oh->name); |
| |
| v = oh->_sysc_cache; |
| ret = _set_softreset(oh, &v); |
| if (ret) |
| goto dis_opt_clks; |
| |
| _write_sysconfig(v, oh); |
| |
| if (oh->class->sysc->srst_udelay) |
| udelay(oh->class->sysc->srst_udelay); |
| |
| c = _wait_softreset_complete(oh); |
| if (c == MAX_MODULE_SOFTRESET_WAIT) { |
| pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", |
| oh->name, MAX_MODULE_SOFTRESET_WAIT); |
| ret = -ETIMEDOUT; |
| goto dis_opt_clks; |
| } else { |
| pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c); |
| } |
| |
| ret = _clear_softreset(oh, &v); |
| if (ret) |
| goto dis_opt_clks; |
| |
| _write_sysconfig(v, oh); |
| |
| /* |
| * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from |
| * _wait_target_ready() or _reset() |
| */ |
| |
| dis_opt_clks: |
| if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) |
| _disable_optional_clocks(oh); |
| |
| return ret; |
| } |
| |
| /** |
| * _reset - reset an omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Resets an omap_hwmod @oh. If the module has a custom reset |
| * function pointer defined, then call it to reset the IP block, and |
| * pass along its return value to the caller. Otherwise, if the IP |
| * block has an OCP_SYSCONFIG register with a SOFTRESET bitfield |
| * associated with it, call a function to reset the IP block via that |
| * method, and pass along the return value to the caller. Finally, if |
| * the IP block has some hardreset lines associated with it, assert |
| * all of those, but do _not_ deassert them. (This is because driver |
| * authors have expressed an apparent requirement to control the |
| * deassertion of the hardreset lines themselves.) |
| * |
| * The default software reset mechanism for most OMAP IP blocks is |
| * triggered via the OCP_SYSCONFIG.SOFTRESET bit. However, some |
| * hwmods cannot be reset via this method. Some are not targets and |
| * therefore have no OCP header registers to access. Others (like the |
| * IVA) have idiosyncratic reset sequences. So for these relatively |
| * rare cases, custom reset code can be supplied in the struct |
| * omap_hwmod_class .reset function pointer. |
| * |
| * _set_dmadisable() is called to set the DMADISABLE bit so that it |
| * does not prevent idling of the system. This is necessary for cases |
| * where ROMCODE/BOOTLOADER uses dma and transfers control to the |
| * kernel without disabling dma. |
| * |
| * Passes along the return value from either _ocp_softreset() or the |
| * custom reset function - these must return -EINVAL if the hwmod |
| * cannot be reset this way or if the hwmod is in the wrong state, |
| * -ETIMEDOUT if the module did not reset in time, or 0 upon success. |
| */ |
| static int _reset(struct omap_hwmod *oh) |
| { |
| int i, r; |
| |
| pr_debug("omap_hwmod: %s: resetting\n", oh->name); |
| |
| if (oh->class->reset) { |
| r = oh->class->reset(oh); |
| } else { |
| if (oh->rst_lines_cnt > 0) { |
| for (i = 0; i < oh->rst_lines_cnt; i++) |
| _assert_hardreset(oh, oh->rst_lines[i].name); |
| return 0; |
| } else { |
| r = _ocp_softreset(oh); |
| if (r == -ENOENT) |
| r = 0; |
| } |
| } |
| |
| _set_dmadisable(oh); |
| |
| /* |
| * OCP_SYSCONFIG bits need to be reprogrammed after a |
| * softreset. The _enable() function should be split to avoid |
| * the rewrite of the OCP_SYSCONFIG register. |
| */ |
| if (oh->class->sysc) { |
| _update_sysc_cache(oh); |
| _enable_sysc(oh); |
| } |
| |
| return r; |
| } |
| |
| /** |
| * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain |
| * |
| * Call the appropriate PRM function to clear any logged I/O chain |
| * wakeups and to reconfigure the chain. This apparently needs to be |
| * done upon every mux change. Since hwmods can be concurrently |
| * enabled and idled, hold a spinlock around the I/O chain |
| * reconfiguration sequence. No return value. |
| * |
| * XXX When the PRM code is moved to drivers, this function can be removed, |
| * as the PRM infrastructure should abstract this. |
| */ |
| static void _reconfigure_io_chain(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&io_chain_lock, flags); |
| |
| if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl()) |
| omap3xxx_prm_reconfigure_io_chain(); |
| else if (cpu_is_omap44xx()) |
| omap44xx_prm_reconfigure_io_chain(); |
| |
| spin_unlock_irqrestore(&io_chain_lock, flags); |
| } |
| |
| /** |
| * _omap4_update_context_lost - increment hwmod context loss counter if |
| * hwmod context was lost, and clear hardware context loss reg |
| * @oh: hwmod to check for context loss |
| * |
| * If the PRCM indicates that the hwmod @oh lost context, increment |
| * our in-memory context loss counter, and clear the RM_*_CONTEXT |
| * bits. No return value. |
| */ |
| static void _omap4_update_context_lost(struct omap_hwmod *oh) |
| { |
| if (oh->prcm.omap4.flags & HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT) |
| return; |
| |
| if (!prm_was_any_context_lost_old(oh->clkdm->pwrdm.ptr->prcm_partition, |
| oh->clkdm->pwrdm.ptr->prcm_offs, |
| oh->prcm.omap4.context_offs)) |
| return; |
| |
| oh->prcm.omap4.context_lost_counter++; |
| prm_clear_context_loss_flags_old(oh->clkdm->pwrdm.ptr->prcm_partition, |
| oh->clkdm->pwrdm.ptr->prcm_offs, |
| oh->prcm.omap4.context_offs); |
| } |
| |
| /** |
| * _omap4_get_context_lost - get context loss counter for a hwmod |
| * @oh: hwmod to get context loss counter for |
| * |
| * Returns the in-memory context loss counter for a hwmod. |
| */ |
| static int _omap4_get_context_lost(struct omap_hwmod *oh) |
| { |
| return oh->prcm.omap4.context_lost_counter; |
| } |
| |
| /** |
| * _enable_preprogram - Pre-program an IP block during the _enable() process |
| * @oh: struct omap_hwmod * |
| * |
| * Some IP blocks (such as AESS) require some additional programming |
| * after enable before they can enter idle. If a function pointer to |
| * do so is present in the hwmod data, then call it and pass along the |
| * return value; otherwise, return 0. |
| */ |
| static int _enable_preprogram(struct omap_hwmod *oh) |
| { |
| if (!oh->class->enable_preprogram) |
| return 0; |
| |
| return oh->class->enable_preprogram(oh); |
| } |
| |
| /** |
| * _enable - enable an omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Enables an omap_hwmod @oh such that the MPU can access the hwmod's |
| * register target. Returns -EINVAL if the hwmod is in the wrong |
| * state or passes along the return value of _wait_target_ready(). |
| */ |
| static int _enable(struct omap_hwmod *oh) |
| { |
| int r; |
| int hwsup = 0; |
| |
| pr_debug("omap_hwmod: %s: enabling\n", oh->name); |
| |
| /* |
| * hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled |
| * state at init. Now that someone is really trying to enable |
| * them, just ensure that the hwmod mux is set. |
| */ |
| if (oh->_int_flags & _HWMOD_SKIP_ENABLE) { |
| /* |
| * If the caller has mux data populated, do the mux'ing |
| * which wouldn't have been done as part of the _enable() |
| * done during setup. |
| */ |
| if (oh->mux) |
| omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); |
| |
| oh->_int_flags &= ~_HWMOD_SKIP_ENABLE; |
| return 0; |
| } |
| |
| if (oh->_state != _HWMOD_STATE_INITIALIZED && |
| oh->_state != _HWMOD_STATE_IDLE && |
| oh->_state != _HWMOD_STATE_DISABLED) { |
| WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n", |
| oh->name); |
| return -EINVAL; |
| } |
| |
| /* |
| * If an IP block contains HW reset lines and all of them are |
| * asserted, we let integration code associated with that |
| * block handle the enable. We've received very little |
| * information on what those driver authors need, and until |
| * detailed information is provided and the driver code is |
| * posted to the public lists, this is probably the best we |
| * can do. |
| */ |
| if (_are_all_hardreset_lines_asserted(oh)) |
| return 0; |
| |
| /* Mux pins for device runtime if populated */ |
| if (oh->mux && (!oh->mux->enabled || |
| ((oh->_state == _HWMOD_STATE_IDLE) && |
| oh->mux->pads_dynamic))) { |
| omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); |
| _reconfigure_io_chain(); |
| } |
| |
| _add_initiator_dep(oh, mpu_oh); |
| |
| if (oh->clkdm) { |
| /* |
| * A clockdomain must be in SW_SUP before enabling |
| * completely the module. The clockdomain can be set |
| * in HW_AUTO only when the module become ready. |
| */ |
| hwsup = clkdm_in_hwsup(oh->clkdm) && |
| !clkdm_missing_idle_reporting(oh->clkdm); |
| r = clkdm_hwmod_enable(oh->clkdm, oh); |
| if (r) { |
| WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", |
| oh->name, oh->clkdm->name, r); |
| return r; |
| } |
| } |
| |
| _enable_clocks(oh); |
| if (soc_ops.enable_module) |
| soc_ops.enable_module(oh); |
| if (oh->flags & HWMOD_BLOCK_WFI) |
| cpu_idle_poll_ctrl(true); |
| |
| if (soc_ops.update_context_lost) |
| soc_ops.update_context_lost(oh); |
| |
| r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) : |
| -EINVAL; |
| if (!r) { |
| /* |
| * Set the clockdomain to HW_AUTO only if the target is ready, |
| * assuming that the previous state was HW_AUTO |
| */ |
| if (oh->clkdm && hwsup) |
| clkdm_allow_idle(oh->clkdm); |
| |
| oh->_state = _HWMOD_STATE_ENABLED; |
| |
| /* Access the sysconfig only if the target is ready */ |
| if (oh->class->sysc) { |
| if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED)) |
| _update_sysc_cache(oh); |
| _enable_sysc(oh); |
| } |
| r = _enable_preprogram(oh); |
| } else { |
| if (soc_ops.disable_module) |
| soc_ops.disable_module(oh); |
| _disable_clocks(oh); |
| pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", |
| oh->name, r); |
| |
| if (oh->clkdm) |
| clkdm_hwmod_disable(oh->clkdm, oh); |
| } |
| |
| return r; |
| } |
| |
| /** |
| * _idle - idle an omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Idles an omap_hwmod @oh. This should be called once the hwmod has |
| * no further work. Returns -EINVAL if the hwmod is in the wrong |
| * state or returns 0. |
| */ |
| static int _idle(struct omap_hwmod *oh) |
| { |
| pr_debug("omap_hwmod: %s: idling\n", oh->name); |
| |
| if (oh->_state != _HWMOD_STATE_ENABLED) { |
| WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n", |
| oh->name); |
| return -EINVAL; |
| } |
| |
| if (_are_all_hardreset_lines_asserted(oh)) |
| return 0; |
| |
| if (oh->class->sysc) |
| _idle_sysc(oh); |
| _del_initiator_dep(oh, mpu_oh); |
| |
| if (oh->flags & HWMOD_BLOCK_WFI) |
| cpu_idle_poll_ctrl(false); |
| if (soc_ops.disable_module) |
| soc_ops.disable_module(oh); |
| |
| /* |
| * The module must be in idle mode before disabling any parents |
| * clocks. Otherwise, the parent clock might be disabled before |
| * the module transition is done, and thus will prevent the |
| * transition to complete properly. |
| */ |
| _disable_clocks(oh); |
| if (oh->clkdm) |
| clkdm_hwmod_disable(oh->clkdm, oh); |
| |
| /* Mux pins for device idle if populated */ |
| if (oh->mux && oh->mux->pads_dynamic) { |
| omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); |
| _reconfigure_io_chain(); |
| } |
| |
| oh->_state = _HWMOD_STATE_IDLE; |
| |
| return 0; |
| } |
| |
| /** |
| * _shutdown - shutdown an omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Shut down an omap_hwmod @oh. This should be called when the driver |
| * used for the hwmod is removed or unloaded or if the driver is not |
| * used by the system. Returns -EINVAL if the hwmod is in the wrong |
| * state or returns 0. |
| */ |
| static int _shutdown(struct omap_hwmod *oh) |
| { |
| int ret, i; |
| u8 prev_state; |
| |
| if (oh->_state != _HWMOD_STATE_IDLE && |
| oh->_state != _HWMOD_STATE_ENABLED) { |
| WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n", |
| oh->name); |
| return -EINVAL; |
| } |
| |
| if (_are_all_hardreset_lines_asserted(oh)) |
| return 0; |
| |
| pr_debug("omap_hwmod: %s: disabling\n", oh->name); |
| |
| if (oh->class->pre_shutdown) { |
| prev_state = oh->_state; |
| if (oh->_state == _HWMOD_STATE_IDLE) |
| _enable(oh); |
| ret = oh->class->pre_shutdown(oh); |
| if (ret) { |
| if (prev_state == _HWMOD_STATE_IDLE) |
| _idle(oh); |
| return ret; |
| } |
| } |
| |
| if (oh->class->sysc) { |
| if (oh->_state == _HWMOD_STATE_IDLE) |
| _enable(oh); |
| _shutdown_sysc(oh); |
| } |
| |
| /* clocks and deps are already disabled in idle */ |
| if (oh->_state == _HWMOD_STATE_ENABLED) { |
| _del_initiator_dep(oh, mpu_oh); |
| /* XXX what about the other system initiators here? dma, dsp */ |
| if (oh->flags & HWMOD_BLOCK_WFI) |
| cpu_idle_poll_ctrl(false); |
| if (soc_ops.disable_module) |
| soc_ops.disable_module(oh); |
| _disable_clocks(oh); |
| if (oh->clkdm) |
| clkdm_hwmod_disable(oh->clkdm, oh); |
| } |
| /* XXX Should this code also force-disable the optional clocks? */ |
| |
| for (i = 0; i < oh->rst_lines_cnt; i++) |
| _assert_hardreset(oh, oh->rst_lines[i].name); |
| |
| /* Mux pins to safe mode or use populated off mode values */ |
| if (oh->mux) |
| omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED); |
| |
| oh->_state = _HWMOD_STATE_DISABLED; |
| |
| return 0; |
| } |
| |
| static int of_dev_find_hwmod(struct device_node *np, |
| struct omap_hwmod *oh) |
| { |
| int count, i, res; |
| const char *p; |
| |
| count = of_property_count_strings(np, "ti,hwmods"); |
| if (count < 1) |
| return -ENODEV; |
| |
| for (i = 0; i < count; i++) { |
| res = of_property_read_string_index(np, "ti,hwmods", |
| i, &p); |
| if (res) |
| continue; |
| if (!strcmp(p, oh->name)) { |
| pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n", |
| np->name, i, oh->name); |
| return i; |
| } |
| } |
| |
| return -ENODEV; |
| } |
| |
| /** |
| * of_dev_hwmod_lookup - look up needed hwmod from dt blob |
| * @np: struct device_node * |
| * @oh: struct omap_hwmod * |
| * @index: index of the entry found |
| * @found: struct device_node * found or NULL |
| * |
| * Parse the dt blob and find out needed hwmod. Recursive function is |
| * implemented to take care hierarchical dt blob parsing. |
| * Return: Returns 0 on success, -ENODEV when not found. |
| */ |
| static int of_dev_hwmod_lookup(struct device_node *np, |
| struct omap_hwmod *oh, |
| int *index, |
| struct device_node **found) |
| { |
| struct device_node *np0 = NULL; |
| int res; |
| |
| res = of_dev_find_hwmod(np, oh); |
| if (res >= 0) { |
| *found = np; |
| *index = res; |
| return 0; |
| } |
| |
| for_each_child_of_node(np, np0) { |
| struct device_node *fc; |
| int i; |
| |
| res = of_dev_hwmod_lookup(np0, oh, &i, &fc); |
| if (res == 0) { |
| *found = fc; |
| *index = i; |
| return 0; |
| } |
| } |
| |
| *found = NULL; |
| *index = 0; |
| |
| return -ENODEV; |
| } |
| |
| /** |
| * _init_mpu_rt_base - populate the virtual address for a hwmod |
| * @oh: struct omap_hwmod * to locate the virtual address |
| * @data: (unused, caller should pass NULL) |
| * @index: index of the reg entry iospace in device tree |
| * @np: struct device_node * of the IP block's device node in the DT data |
| * |
| * Cache the virtual address used by the MPU to access this IP block's |
| * registers. This address is needed early so the OCP registers that |
| * are part of the device's address space can be ioremapped properly. |
| * |
| * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and |
| * -ENXIO on absent or invalid register target address space. |
| */ |
| static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, |
| int index, struct device_node *np) |
| { |
| struct omap_hwmod_addr_space *mem; |
| void __iomem *va_start = NULL; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| _save_mpu_port_index(oh); |
| |
| if (oh->_int_flags & _HWMOD_NO_MPU_PORT) |
| return -ENXIO; |
| |
| mem = _find_mpu_rt_addr_space(oh); |
| if (!mem) { |
| pr_debug("omap_hwmod: %s: no MPU register target found\n", |
| oh->name); |
| |
| /* Extract the IO space from device tree blob */ |
| if (!np) |
| return -ENXIO; |
| |
| va_start = of_iomap(np, index + oh->mpu_rt_idx); |
| } else { |
| va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); |
| } |
| |
| if (!va_start) { |
| if (mem) |
| pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); |
| else |
| pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n", |
| oh->name, index, np->full_name); |
| return -ENXIO; |
| } |
| |
| pr_debug("omap_hwmod: %s: MPU register target at va %p\n", |
| oh->name, va_start); |
| |
| oh->_mpu_rt_va = va_start; |
| return 0; |
| } |
| |
| /** |
| * _init - initialize internal data for the hwmod @oh |
| * @oh: struct omap_hwmod * |
| * @n: (unused) |
| * |
| * Look up the clocks and the address space used by the MPU to access |
| * registers belonging to the hwmod @oh. @oh must already be |
| * registered at this point. This is the first of two phases for |
| * hwmod initialization. Code called here does not touch any hardware |
| * registers, it simply prepares internal data structures. Returns 0 |
| * upon success or if the hwmod isn't registered or if the hwmod's |
| * address space is not defined, or -EINVAL upon failure. |
| */ |
| static int __init _init(struct omap_hwmod *oh, void *data) |
| { |
| int r, index; |
| struct device_node *np = NULL; |
| |
| if (oh->_state != _HWMOD_STATE_REGISTERED) |
| return 0; |
| |
| if (of_have_populated_dt()) { |
| struct device_node *bus; |
| |
| bus = of_find_node_by_name(NULL, "ocp"); |
| if (!bus) |
| return -ENODEV; |
| |
| r = of_dev_hwmod_lookup(bus, oh, &index, &np); |
| if (r) |
| pr_debug("omap_hwmod: %s missing dt data\n", oh->name); |
| else if (np && index) |
| pr_warn("omap_hwmod: %s using broken dt data from %s\n", |
| oh->name, np->name); |
| } |
| |
| if (oh->class->sysc) { |
| r = _init_mpu_rt_base(oh, NULL, index, np); |
| if (r < 0) { |
| WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", |
| oh->name); |
| return 0; |
| } |
| } |
| |
| r = _init_clocks(oh, NULL); |
| if (r < 0) { |
| WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name); |
| return -EINVAL; |
| } |
| |
| if (np) { |
| if (of_find_property(np, "ti,no-reset-on-init", NULL)) |
| oh->flags |= HWMOD_INIT_NO_RESET; |
| if (of_find_property(np, "ti,no-idle-on-init", NULL)) |
| oh->flags |= HWMOD_INIT_NO_IDLE; |
| } |
| |
| oh->_state = _HWMOD_STATE_INITIALIZED; |
| |
| return 0; |
| } |
| |
| /** |
| * _setup_iclk_autoidle - configure an IP block's interface clocks |
| * @oh: struct omap_hwmod * |
| * |
| * Set up the module's interface clocks. XXX This function is still mostly |
| * a stub; implementing this properly requires iclk autoidle usecounting in |
| * the clock code. No return value. |
| */ |
| static void __init _setup_iclk_autoidle(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_ocp_if *os; |
| struct list_head *p; |
| int i = 0; |
| if (oh->_state != _HWMOD_STATE_INITIALIZED) |
| return; |
| |
| p = oh->slave_ports.next; |
| |
| while (i < oh->slaves_cnt) { |
| os = _fetch_next_ocp_if(&p, &i); |
| if (!os->_clk) |
| continue; |
| |
| if (os->flags & OCPIF_SWSUP_IDLE) { |
| /* XXX omap_iclk_deny_idle(c); */ |
| } else { |
| /* XXX omap_iclk_allow_idle(c); */ |
| clk_enable(os->_clk); |
| } |
| } |
| |
| return; |
| } |
| |
| /** |
| * _setup_reset - reset an IP block during the setup process |
| * @oh: struct omap_hwmod * |
| * |
| * Reset the IP block corresponding to the hwmod @oh during the setup |
| * process. The IP block is first enabled so it can be successfully |
| * reset. Returns 0 upon success or a negative error code upon |
| * failure. |
| */ |
| static int __init _setup_reset(struct omap_hwmod *oh) |
| { |
| int r; |
| |
| if (oh->_state != _HWMOD_STATE_INITIALIZED) |
| return -EINVAL; |
| |
| if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK) |
| return -EPERM; |
| |
| if (oh->rst_lines_cnt == 0) { |
| r = _enable(oh); |
| if (r) { |
| pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n", |
| oh->name, oh->_state); |
| return -EINVAL; |
| } |
| } |
| |
| if (!(oh->flags & HWMOD_INIT_NO_RESET)) |
| r = _reset(oh); |
| |
| return r; |
| } |
| |
| /** |
| * _setup_postsetup - transition to the appropriate state after _setup |
| * @oh: struct omap_hwmod * |
| * |
| * Place an IP block represented by @oh into a "post-setup" state -- |
| * either IDLE, ENABLED, or DISABLED. ("post-setup" simply means that |
| * this function is called at the end of _setup().) The postsetup |
| * state for an IP block can be changed by calling |
| * omap_hwmod_enter_postsetup_state() early in the boot process, |
| * before one of the omap_hwmod_setup*() functions are called for the |
| * IP block. |
| * |
| * The IP block stays in this state until a PM runtime-based driver is |
| * loaded for that IP block. A post-setup state of IDLE is |
| * appropriate for almost all IP blocks with runtime PM-enabled |
| * drivers, since those drivers are able to enable the IP block. A |
| * post-setup state of ENABLED is appropriate for kernels with PM |
| * runtime disabled. The DISABLED state is appropriate for unusual IP |
| * blocks such as the MPU WDTIMER on kernels without WDTIMER drivers |
| * included, since the WDTIMER starts running on reset and will reset |
| * the MPU if left active. |
| * |
| * This post-setup mechanism is deprecated. Once all of the OMAP |
| * drivers have been converted to use PM runtime, and all of the IP |
| * block data and interconnect data is available to the hwmod code, it |
| * should be possible to replace this mechanism with a "lazy reset" |
| * arrangement. In a "lazy reset" setup, each IP block is enabled |
| * when the driver first probes, then all remaining IP blocks without |
| * drivers are either shut down or enabled after the drivers have |
| * loaded. However, this cannot take place until the above |
| * preconditions have been met, since otherwise the late reset code |
| * has no way of knowing which IP blocks are in use by drivers, and |
| * which ones are unused. |
| * |
| * No return value. |
| */ |
| static void __init _setup_postsetup(struct omap_hwmod *oh) |
| { |
| u8 postsetup_state; |
| |
| if (oh->rst_lines_cnt > 0) |
| return; |
| |
| postsetup_state = oh->_postsetup_state; |
| if (postsetup_state == _HWMOD_STATE_UNKNOWN) |
| postsetup_state = _HWMOD_STATE_ENABLED; |
| |
| /* |
| * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data - |
| * it should be set by the core code as a runtime flag during startup |
| */ |
| if ((oh->flags & HWMOD_INIT_NO_IDLE) && |
| (postsetup_state == _HWMOD_STATE_IDLE)) { |
| oh->_int_flags |= _HWMOD_SKIP_ENABLE; |
| postsetup_state = _HWMOD_STATE_ENABLED; |
| } |
| |
| if (postsetup_state == _HWMOD_STATE_IDLE) |
| _idle(oh); |
| else if (postsetup_state == _HWMOD_STATE_DISABLED) |
| _shutdown(oh); |
| else if (postsetup_state != _HWMOD_STATE_ENABLED) |
| WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n", |
| oh->name, postsetup_state); |
| |
| return; |
| } |
| |
| /** |
| * _setup - prepare IP block hardware for use |
| * @oh: struct omap_hwmod * |
| * @n: (unused, pass NULL) |
| * |
| * Configure the IP block represented by @oh. This may include |
| * enabling the IP block, resetting it, and placing it into a |
| * post-setup state, depending on the type of IP block and applicable |
| * flags. IP blocks are reset to prevent any previous configuration |
| * by the bootloader or previous operating system from interfering |
| * with power management or other parts of the system. The reset can |
| * be avoided; see omap_hwmod_no_setup_reset(). This is the second of |
| * two phases for hwmod initialization. Code called here generally |
| * affects the IP block hardware, or system integration hardware |
| * associated with the IP block. Returns 0. |
| */ |
| static int __init _setup(struct omap_hwmod *oh, void *data) |
| { |
| if (oh->_state != _HWMOD_STATE_INITIALIZED) |
| return 0; |
| |
| _setup_iclk_autoidle(oh); |
| |
| if (!_setup_reset(oh)) |
| _setup_postsetup(oh); |
| |
| return 0; |
| } |
| |
| /** |
| * _register - register a struct omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Registers the omap_hwmod @oh. Returns -EEXIST if an omap_hwmod |
| * already has been registered by the same name; -EINVAL if the |
| * omap_hwmod is in the wrong state, if @oh is NULL, if the |
| * omap_hwmod's class field is NULL; if the omap_hwmod is missing a |
| * name, or if the omap_hwmod's class is missing a name; or 0 upon |
| * success. |
| * |
| * XXX The data should be copied into bootmem, so the original data |
| * should be marked __initdata and freed after init. This would allow |
| * unneeded omap_hwmods to be freed on multi-OMAP configurations. Note |
| * that the copy process would be relatively complex due to the large number |
| * of substructures. |
| */ |
| static int __init _register(struct omap_hwmod *oh) |
| { |
| if (!oh || !oh->name || !oh->class || !oh->class->name || |
| (oh->_state != _HWMOD_STATE_UNKNOWN)) |
| return -EINVAL; |
| |
| pr_debug("omap_hwmod: %s: registering\n", oh->name); |
| |
| if (_lookup(oh->name)) |
| return -EEXIST; |
| |
| list_add_tail(&oh->node, &omap_hwmod_list); |
| |
| INIT_LIST_HEAD(&oh->master_ports); |
| INIT_LIST_HEAD(&oh->slave_ports); |
| spin_lock_init(&oh->_lock); |
| |
| oh->_state = _HWMOD_STATE_REGISTERED; |
| |
| /* |
| * XXX Rather than doing a strcmp(), this should test a flag |
| * set in the hwmod data, inserted by the autogenerator code. |
| */ |
| if (!strcmp(oh->name, MPU_INITIATOR_NAME)) |
| mpu_oh = oh; |
| |
| return 0; |
| } |
| |
| /** |
| * _alloc_links - return allocated memory for hwmod links |
| * @ml: pointer to a struct omap_hwmod_link * for the master link |
| * @sl: pointer to a struct omap_hwmod_link * for the slave link |
| * |
| * Return pointers to two struct omap_hwmod_link records, via the |
| * addresses pointed to by @ml and @sl. Will first attempt to return |
| * memory allocated as part of a large initial block, but if that has |
| * been exhausted, will allocate memory itself. Since ideally this |
| * second allocation path will never occur, the number of these |
| * 'supplemental' allocations will be logged when debugging is |
| * enabled. Returns 0. |
| */ |
| static int __init _alloc_links(struct omap_hwmod_link **ml, |
| struct omap_hwmod_link **sl) |
| { |
| unsigned int sz; |
| |
| if ((free_ls + LINKS_PER_OCP_IF) <= max_ls) { |
| *ml = &linkspace[free_ls++]; |
| *sl = &linkspace[free_ls++]; |
| return 0; |
| } |
| |
| sz = sizeof(struct omap_hwmod_link) * LINKS_PER_OCP_IF; |
| |
| *sl = NULL; |
| *ml = memblock_virt_alloc(sz, 0); |
| |
| *sl = (void *)(*ml) + sizeof(struct omap_hwmod_link); |
| |
| ls_supp++; |
| pr_debug("omap_hwmod: supplemental link allocations needed: %d\n", |
| ls_supp * LINKS_PER_OCP_IF); |
| |
| return 0; |
| }; |
| |
| /** |
| * _add_link - add an interconnect between two IP blocks |
| * @oi: pointer to a struct omap_hwmod_ocp_if record |
| * |
| * Add struct omap_hwmod_link records connecting the master IP block |
| * specified in @oi->master to @oi, and connecting the slave IP block |
| * specified in @oi->slave to @oi. This code is assumed to run before |
| * preemption or SMP has been enabled, thus avoiding the need for |
| * locking in this code. Changes to this assumption will require |
| * additional locking. Returns 0. |
| */ |
| static int __init _add_link(struct omap_hwmod_ocp_if *oi) |
| { |
| struct omap_hwmod_link *ml, *sl; |
| |
| pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name, |
| oi->slave->name); |
| |
| _alloc_links(&ml, &sl); |
| |
| ml->ocp_if = oi; |
| INIT_LIST_HEAD(&ml->node); |
| list_add(&ml->node, &oi->master->master_ports); |
| oi->master->masters_cnt++; |
| |
| sl->ocp_if = oi; |
| INIT_LIST_HEAD(&sl->node); |
| list_add(&sl->node, &oi->slave->slave_ports); |
| oi->slave->slaves_cnt++; |
| |
| return 0; |
| } |
| |
| /** |
| * _register_link - register a struct omap_hwmod_ocp_if |
| * @oi: struct omap_hwmod_ocp_if * |
| * |
| * Registers the omap_hwmod_ocp_if record @oi. Returns -EEXIST if it |
| * has already been registered; -EINVAL if @oi is NULL or if the |
| * record pointed to by @oi is missing required fields; or 0 upon |
| * success. |
| * |
| * XXX The data should be copied into bootmem, so the original data |
| * should be marked __initdata and freed after init. This would allow |
| * unneeded omap_hwmods to be freed on multi-OMAP configurations. |
| */ |
| static int __init _register_link(struct omap_hwmod_ocp_if *oi) |
| { |
| if (!oi || !oi->master || !oi->slave || !oi->user) |
| return -EINVAL; |
| |
| if (oi->_int_flags & _OCPIF_INT_FLAGS_REGISTERED) |
| return -EEXIST; |
| |
| pr_debug("omap_hwmod: registering link from %s to %s\n", |
| oi->master->name, oi->slave->name); |
| |
| /* |
| * Register the connected hwmods, if they haven't been |
| * registered already |
| */ |
| if (oi->master->_state != _HWMOD_STATE_REGISTERED) |
| _register(oi->master); |
| |
| if (oi->slave->_state != _HWMOD_STATE_REGISTERED) |
| _register(oi->slave); |
| |
| _add_link(oi); |
| |
| oi->_int_flags |= _OCPIF_INT_FLAGS_REGISTERED; |
| |
| return 0; |
| } |
| |
| /** |
| * _alloc_linkspace - allocate large block of hwmod links |
| * @ois: pointer to an array of struct omap_hwmod_ocp_if records to count |
| * |
| * Allocate a large block of struct omap_hwmod_link records. This |
| * improves boot time significantly by avoiding the need to allocate |
| * individual records one by one. If the number of records to |
| * allocate in the block hasn't been manually specified, this function |
| * will count the number of struct omap_hwmod_ocp_if records in @ois |
| * and use that to determine the allocation size. For SoC families |
| * that require multiple list registrations, such as OMAP3xxx, this |
| * estimation process isn't optimal, so manual estimation is advised |
| * in those cases. Returns -EEXIST if the allocation has already occurred |
| * or 0 upon success. |
| */ |
| static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) |
| { |
| unsigned int i = 0; |
| unsigned int sz; |
| |
| if (linkspace) { |
| WARN(1, "linkspace already allocated\n"); |
| return -EEXIST; |
| } |
| |
| if (max_ls == 0) |
| while (ois[i++]) |
| max_ls += LINKS_PER_OCP_IF; |
| |
| sz = sizeof(struct omap_hwmod_link) * max_ls; |
| |
| pr_debug("omap_hwmod: %s: allocating %d byte linkspace (%d links)\n", |
| __func__, sz, max_ls); |
| |
| linkspace = memblock_virt_alloc(sz, 0); |
| |
| return 0; |
| } |
| |
| /* Static functions intended only for use in soc_ops field function pointers */ |
| |
| /** |
| * _omap2xxx_wait_target_ready - wait for a module to leave slave idle |
| * @oh: struct omap_hwmod * |
| * |
| * Wait for a module @oh to leave slave idle. Returns 0 if the module |
| * does not have an IDLEST bit or if the module successfully leaves |
| * slave idle; otherwise, pass along the return value of the |
| * appropriate *_cm*_wait_module_ready() function. |
| */ |
| static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh) |
| { |
| if (!oh) |
| return -EINVAL; |
| |
| if (oh->flags & HWMOD_NO_IDLEST) |
| return 0; |
| |
| if (!_find_mpu_rt_port(oh)) |
| return 0; |
| |
| /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ |
| |
| return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs, |
| oh->prcm.omap2.idlest_reg_id, |
| oh->prcm.omap2.idlest_idle_bit); |
| } |
| |
| /** |
| * _omap3xxx_wait_target_ready - wait for a module to leave slave idle |
| * @oh: struct omap_hwmod * |
| * |
| * Wait for a module @oh to leave slave idle. Returns 0 if the module |
| * does not have an IDLEST bit or if the module successfully leaves |
| * slave idle; otherwise, pass along the return value of the |
| * appropriate *_cm*_wait_module_ready() function. |
| */ |
| static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh) |
| { |
| if (!oh) |
| return -EINVAL; |
| |
| if (oh->flags & HWMOD_NO_IDLEST) |
| return 0; |
| |
| if (!_find_mpu_rt_port(oh)) |
| return 0; |
| |
| /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ |
| |
| return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs, |
| oh->prcm.omap2.idlest_reg_id, |
| oh->prcm.omap2.idlest_idle_bit); |
| } |
| |
| /** |
| * _omap4_wait_target_ready - wait for a module to leave slave idle |
| * @oh: struct omap_hwmod * |
| * |
| * Wait for a module @oh to leave slave idle. Returns 0 if the module |
| * does not have an IDLEST bit or if the module successfully leaves |
| * slave idle; otherwise, pass along the return value of the |
| * appropriate *_cm*_wait_module_ready() function. |
| */ |
| static int _omap4_wait_target_ready(struct omap_hwmod *oh) |
| { |
| if (!oh) |
| return -EINVAL; |
| |
| if (oh->flags & HWMOD_NO_IDLEST || !oh->clkdm) |
| return 0; |
| |
| if (!_find_mpu_rt_port(oh)) |
| return 0; |
| |
| /* XXX check module SIDLEMODE, hardreset status */ |
| |
| return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, |
| oh->clkdm->cm_inst, |
| oh->clkdm->clkdm_offs, |
| oh->prcm.omap4.clkctrl_offs); |
| } |
| |
| /** |
| * _am33xx_wait_target_ready - wait for a module to leave slave idle |
| * @oh: struct omap_hwmod * |
| * |
| * Wait for a module @oh to leave slave idle. Returns 0 if the module |
| * does not have an IDLEST bit or if the module successfully leaves |
| * slave idle; otherwise, pass along the return value of the |
| * appropriate *_cm*_wait_module_ready() function. |
| */ |
| static int _am33xx_wait_target_ready(struct omap_hwmod *oh) |
| { |
| if (!oh || !oh->clkdm) |
| return -EINVAL; |
| |
| if (oh->flags & HWMOD_NO_IDLEST) |
| return 0; |
| |
| if (!_find_mpu_rt_port(oh)) |
| return 0; |
| |
| /* XXX check module SIDLEMODE, hardreset status */ |
| |
| return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst, |
| oh->clkdm->clkdm_offs, |
| oh->prcm.omap4.clkctrl_offs); |
| } |
| |
| /** |
| * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to assert hardreset |
| * @ohri: hardreset line data |
| * |
| * Call omap2_prm_assert_hardreset() with parameters extracted from |
| * the hwmod @oh and the hardreset line data @ohri. Only intended for |
| * use as an soc_ops function pointer. Passes along the return value |
| * from omap2_prm_assert_hardreset(). XXX This function is scheduled |
| * for removal when the PRM code is moved into drivers/. |
| */ |
| static int _omap2_assert_hardreset(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, |
| ohri->rst_shift); |
| } |
| |
| /** |
| * _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to deassert hardreset |
| * @ohri: hardreset line data |
| * |
| * Call omap2_prm_deassert_hardreset() with parameters extracted from |
| * the hwmod @oh and the hardreset line data @ohri. Only intended for |
| * use as an soc_ops function pointer. Passes along the return value |
| * from omap2_prm_deassert_hardreset(). XXX This function is |
| * scheduled for removal when the PRM code is moved into drivers/. |
| */ |
| static int _omap2_deassert_hardreset(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, |
| ohri->rst_shift, |
| ohri->st_shift); |
| } |
| |
| /** |
| * _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to test hardreset |
| * @ohri: hardreset line data |
| * |
| * Call omap2_prm_is_hardreset_asserted() with parameters extracted |
| * from the hwmod @oh and the hardreset line data @ohri. Only |
| * intended for use as an soc_ops function pointer. Passes along the |
| * return value from omap2_prm_is_hardreset_asserted(). XXX This |
| * function is scheduled for removal when the PRM code is moved into |
| * drivers/. |
| */ |
| static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, |
| ohri->st_shift); |
| } |
| |
| /** |
| * _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to assert hardreset |
| * @ohri: hardreset line data |
| * |
| * Call omap4_prminst_assert_hardreset() with parameters extracted |
| * from the hwmod @oh and the hardreset line data @ohri. Only |
| * intended for use as an soc_ops function pointer. Passes along the |
| * return value from omap4_prminst_assert_hardreset(). XXX This |
| * function is scheduled for removal when the PRM code is moved into |
| * drivers/. |
| */ |
| static int _omap4_assert_hardreset(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| if (!oh->clkdm) |
| return -EINVAL; |
| |
| return omap4_prminst_assert_hardreset(ohri->rst_shift, |
| oh->clkdm->pwrdm.ptr->prcm_partition, |
| oh->clkdm->pwrdm.ptr->prcm_offs, |
| oh->prcm.omap4.rstctrl_offs); |
| } |
| |
| /** |
| * _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to deassert hardreset |
| * @ohri: hardreset line data |
| * |
| * Call omap4_prminst_deassert_hardreset() with parameters extracted |
| * from the hwmod @oh and the hardreset line data @ohri. Only |
| * intended for use as an soc_ops function pointer. Passes along the |
| * return value from omap4_prminst_deassert_hardreset(). XXX This |
| * function is scheduled for removal when the PRM code is moved into |
| * drivers/. |
| */ |
| static int _omap4_deassert_hardreset(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| if (!oh->clkdm) |
| return -EINVAL; |
| |
| if (ohri->st_shift) |
| pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", |
| oh->name, ohri->name); |
| return omap4_prminst_deassert_hardreset(ohri->rst_shift, |
| oh->clkdm->pwrdm.ptr->prcm_partition, |
| oh->clkdm->pwrdm.ptr->prcm_offs, |
| oh->prcm.omap4.rstctrl_offs); |
| } |
| |
| /** |
| * _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to test hardreset |
| * @ohri: hardreset line data |
| * |
| * Call omap4_prminst_is_hardreset_asserted() with parameters |
| * extracted from the hwmod @oh and the hardreset line data @ohri. |
| * Only intended for use as an soc_ops function pointer. Passes along |
| * the return value from omap4_prminst_is_hardreset_asserted(). XXX |
| * This function is scheduled for removal when the PRM code is moved |
| * into drivers/. |
| */ |
| static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| if (!oh->clkdm) |
| return -EINVAL; |
| |
| return omap4_prminst_is_hardreset_asserted(ohri->rst_shift, |
| oh->clkdm->pwrdm.ptr->prcm_partition, |
| oh->clkdm->pwrdm.ptr->prcm_offs, |
| oh->prcm.omap4.rstctrl_offs); |
| } |
| |
| /** |
| * _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to assert hardreset |
| * @ohri: hardreset line data |
| * |
| * Call am33xx_prminst_assert_hardreset() with parameters extracted |
| * from the hwmod @oh and the hardreset line data @ohri. Only |
| * intended for use as an soc_ops function pointer. Passes along the |
| * return value from am33xx_prminst_assert_hardreset(). XXX This |
| * function is scheduled for removal when the PRM code is moved into |
| * drivers/. |
| */ |
| static int _am33xx_assert_hardreset(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| |
| { |
| return am33xx_prm_assert_hardreset(ohri->rst_shift, |
| oh->clkdm->pwrdm.ptr->prcm_offs, |
| oh->prcm.omap4.rstctrl_offs); |
| } |
| |
| /** |
| * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to deassert hardreset |
| * @ohri: hardreset line data |
| * |
| * Call am33xx_prminst_deassert_hardreset() with parameters extracted |
| * from the hwmod @oh and the hardreset line data @ohri. Only |
| * intended for use as an soc_ops function pointer. Passes along the |
| * return value from am33xx_prminst_deassert_hardreset(). XXX This |
| * function is scheduled for removal when the PRM code is moved into |
| * drivers/. |
| */ |
| static int _am33xx_deassert_hardreset(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| return am33xx_prm_deassert_hardreset(ohri->rst_shift, |
| ohri->st_shift, |
| oh->clkdm->pwrdm.ptr->prcm_offs, |
| oh->prcm.omap4.rstctrl_offs, |
| oh->prcm.omap4.rstst_offs); |
| } |
| |
| /** |
| * _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args |
| * @oh: struct omap_hwmod * to test hardreset |
| * @ohri: hardreset line data |
| * |
| * Call am33xx_prminst_is_hardreset_asserted() with parameters |
| * extracted from the hwmod @oh and the hardreset line data @ohri. |
| * Only intended for use as an soc_ops function pointer. Passes along |
| * the return value from am33xx_prminst_is_hardreset_asserted(). XXX |
| * This function is scheduled for removal when the PRM code is moved |
| * into drivers/. |
| */ |
| static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh, |
| struct omap_hwmod_rst_info *ohri) |
| { |
| return am33xx_prm_is_hardreset_asserted(ohri->rst_shift, |
| oh->clkdm->pwrdm.ptr->prcm_offs, |
| oh->prcm.omap4.rstctrl_offs); |
| } |
| |
| /* Public functions */ |
| |
| u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) |
| { |
| if (oh->flags & HWMOD_16BIT_REG) |
| return readw_relaxed(oh->_mpu_rt_va + reg_offs); |
| else |
| return readl_relaxed(oh->_mpu_rt_va + reg_offs); |
| } |
| |
| void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) |
| { |
| if (oh->flags & HWMOD_16BIT_REG) |
| writew_relaxed(v, oh->_mpu_rt_va + reg_offs); |
| else |
| writel_relaxed(v, oh->_mpu_rt_va + reg_offs); |
| } |
| |
| /** |
| * omap_hwmod_softreset - reset a module via SYSCONFIG.SOFTRESET bit |
| * @oh: struct omap_hwmod * |
| * |
| * This is a public function exposed to drivers. Some drivers may need to do |
| * some settings before and after resetting the device. Those drivers after |
| * doing the necessary settings could use this function to start a reset by |
| * setting the SYSCONFIG.SOFTRESET bit. |
| */ |
| int omap_hwmod_softreset(struct omap_hwmod *oh) |
| { |
| u32 v; |
| int ret; |
| |
| if (!oh || !(oh->_sysc_cache)) |
| return -EINVAL; |
| |
| v = oh->_sysc_cache; |
| ret = _set_softreset(oh, &v); |
| if (ret) |
| goto error; |
| _write_sysconfig(v, oh); |
| |
| ret = _clear_softreset(oh, &v); |
| if (ret) |
| goto error; |
| _write_sysconfig(v, oh); |
| |
| error: |
| return ret; |
| } |
| |
| /** |
| * omap_hwmod_lookup - look up a registered omap_hwmod by name |
| * @name: name of the omap_hwmod to look up |
| * |
| * Given a @name of an omap_hwmod, return a pointer to the registered |
| * struct omap_hwmod *, or NULL upon error. |
| */ |
| struct omap_hwmod *omap_hwmod_lookup(const char *name) |
| { |
| struct omap_hwmod *oh; |
| |
| if (!name) |
| return NULL; |
| |
| oh = _lookup(name); |
| |
| return oh; |
| } |
| |
| /** |
| * omap_hwmod_for_each - call function for each registered omap_hwmod |
| * @fn: pointer to a callback function |
| * @data: void * data to pass to callback function |
| * |
| * Call @fn for each registered omap_hwmod, passing @data to each |
| * function. @fn must return 0 for success or any other value for |
| * failure. If @fn returns non-zero, the iteration across omap_hwmods |
| * will stop and the non-zero return value will be passed to the |
| * caller of omap_hwmod_for_each(). @fn is called with |
| * omap_hwmod_for_each() held. |
| */ |
| int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), |
| void *data) |
| { |
| struct omap_hwmod *temp_oh; |
| int ret = 0; |
| |
| if (!fn) |
| return -EINVAL; |
| |
| list_for_each_entry(temp_oh, &omap_hwmod_list, node) { |
| ret = (*fn)(temp_oh, data); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * omap_hwmod_register_links - register an array of hwmod links |
| * @ois: pointer to an array of omap_hwmod_ocp_if to register |
| * |
| * Intended to be called early in boot before the clock framework is |
| * initialized. If @ois is not null, will register all omap_hwmods |
| * listed in @ois that are valid for this chip. Returns -EINVAL if |
| * omap_hwmod_init() hasn't been called before calling this function, |
| * -ENOMEM if the link memory area can't be allocated, or 0 upon |
| * success. |
| */ |
| int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) |
| { |
| int r, i; |
| |
| if (!inited) |
| return -EINVAL; |
| |
| if (!ois) |
| return 0; |
| |
| if (!linkspace) { |
| if (_alloc_linkspace(ois)) { |
| pr_err("omap_hwmod: could not allocate link space\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| i = 0; |
| do { |
| r = _register_link(ois[i]); |
| WARN(r && r != -EEXIST, |
| "omap_hwmod: _register_link(%s -> %s) returned %d\n", |
| ois[i]->master->name, ois[i]->slave->name, r); |
| } while (ois[++i]); |
| |
| return 0; |
| } |
| |
| /** |
| * _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up |
| * @oh: pointer to the hwmod currently being set up (usually not the MPU) |
| * |
| * If the hwmod data corresponding to the MPU subsystem IP block |
| * hasn't been initialized and set up yet, do so now. This must be |
| * done first since sleep dependencies may be added from other hwmods |
| * to the MPU. Intended to be called only by omap_hwmod_setup*(). No |
| * return value. |
| */ |
| static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh) |
| { |
| if (!mpu_oh || mpu_oh->_state == _HWMOD_STATE_UNKNOWN) |
| pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n", |
| __func__, MPU_INITIATOR_NAME); |
| else if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh) |
| omap_hwmod_setup_one(MPU_INITIATOR_NAME); |
| } |
| |
| /** |
| * omap_hwmod_setup_one - set up a single hwmod |
| * @oh_name: const char * name of the already-registered hwmod to set up |
| * |
| * Initialize and set up a single hwmod. Intended to be used for a |
| * small number of early devices, such as the timer IP blocks used for |
| * the scheduler clock. Must be called after omap2_clk_init(). |
| * Resolves the struct clk names to struct clk pointers for each |
| * registered omap_hwmod. Also calls _setup() on each hwmod. Returns |
| * -EINVAL upon error or 0 upon success. |
| */ |
| int __init omap_hwmod_setup_one(const char *oh_name) |
| { |
| struct omap_hwmod *oh; |
| |
| pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__); |
| |
| oh = _lookup(oh_name); |
| if (!oh) { |
| WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name); |
| return -EINVAL; |
| } |
| |
| _ensure_mpu_hwmod_is_setup(oh); |
| |
| _init(oh, NULL); |
| _setup(oh, NULL); |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_setup_all - set up all registered IP blocks |
| * |
| * Initialize and set up all IP blocks registered with the hwmod code. |
| * Must be called after omap2_clk_init(). Resolves the struct clk |
| * names to struct clk pointers for each registered omap_hwmod. Also |
| * calls _setup() on each hwmod. Returns 0 upon success. |
| */ |
| static int __init omap_hwmod_setup_all(void) |
| { |
| _ensure_mpu_hwmod_is_setup(NULL); |
| |
| omap_hwmod_for_each(_init, NULL); |
| omap_hwmod_for_each(_setup, NULL); |
| |
| return 0; |
| } |
| omap_core_initcall(omap_hwmod_setup_all); |
| |
| /** |
| * omap_hwmod_enable - enable an omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Enable an omap_hwmod @oh. Intended to be called by omap_device_enable(). |
| * Returns -EINVAL on error or passes along the return value from _enable(). |
| */ |
| int omap_hwmod_enable(struct omap_hwmod *oh) |
| { |
| int r; |
| unsigned long flags; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| r = _enable(oh); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return r; |
| } |
| |
| /** |
| * omap_hwmod_idle - idle an omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Idle an omap_hwmod @oh. Intended to be called by omap_device_idle(). |
| * Returns -EINVAL on error or passes along the return value from _idle(). |
| */ |
| int omap_hwmod_idle(struct omap_hwmod *oh) |
| { |
| unsigned long flags; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| _idle(oh); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_shutdown - shutdown an omap_hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Shutdown an omap_hwmod @oh. Intended to be called by |
| * omap_device_shutdown(). Returns -EINVAL on error or passes along |
| * the return value from _shutdown(). |
| */ |
| int omap_hwmod_shutdown(struct omap_hwmod *oh) |
| { |
| unsigned long flags; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| _shutdown(oh); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_enable_clocks - enable main_clk, all interface clocks |
| * @oh: struct omap_hwmod *oh |
| * |
| * Intended to be called by the omap_device code. |
| */ |
| int omap_hwmod_enable_clocks(struct omap_hwmod *oh) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| _enable_clocks(oh); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_disable_clocks - disable main_clk, all interface clocks |
| * @oh: struct omap_hwmod *oh |
| * |
| * Intended to be called by the omap_device code. |
| */ |
| int omap_hwmod_disable_clocks(struct omap_hwmod *oh) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| _disable_clocks(oh); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete |
| * @oh: struct omap_hwmod *oh |
| * |
| * Intended to be called by drivers and core code when all posted |
| * writes to a device must complete before continuing further |
| * execution (for example, after clearing some device IRQSTATUS |
| * register bits) |
| * |
| * XXX what about targets with multiple OCP threads? |
| */ |
| void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) |
| { |
| BUG_ON(!oh); |
| |
| if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { |
| WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", |
| oh->name); |
| return; |
| } |
| |
| /* |
| * Forces posted writes to complete on the OCP thread handling |
| * register writes |
| */ |
| omap_hwmod_read(oh, oh->class->sysc->sysc_offs); |
| } |
| |
| /** |
| * omap_hwmod_reset - reset the hwmod |
| * @oh: struct omap_hwmod * |
| * |
| * Under some conditions, a driver may wish to reset the entire device. |
| * Called from omap_device code. Returns -EINVAL on error or passes along |
| * the return value from _reset(). |
| */ |
| int omap_hwmod_reset(struct omap_hwmod *oh) |
| { |
| int r; |
| unsigned long flags; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| r = _reset(oh); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return r; |
| } |
| |
| /* |
| * IP block data retrieval functions |
| */ |
| |
| /** |
| * omap_hwmod_count_resources - count number of struct resources needed by hwmod |
| * @oh: struct omap_hwmod * |
| * @flags: Type of resources to include when counting (IRQ/DMA/MEM) |
| * |
| * Count the number of struct resource array elements necessary to |
| * contain omap_hwmod @oh resources. Intended to be called by code |
| * that registers omap_devices. Intended to be used to determine the |
| * size of a dynamically-allocated struct resource array, before |
| * calling omap_hwmod_fill_resources(). Returns the number of struct |
| * resource array elements needed. |
| * |
| * XXX This code is not optimized. It could attempt to merge adjacent |
| * resource IDs. |
| * |
| */ |
| int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags) |
| { |
| int ret = 0; |
| |
| if (flags & IORESOURCE_IRQ) |
| ret += _count_mpu_irqs(oh); |
| |
| if (flags & IORESOURCE_DMA) |
| ret += _count_sdma_reqs(oh); |
| |
| if (flags & IORESOURCE_MEM) { |
| int i = 0; |
| struct omap_hwmod_ocp_if *os; |
| struct list_head *p = oh->slave_ports.next; |
| |
| while (i < oh->slaves_cnt) { |
| os = _fetch_next_ocp_if(&p, &i); |
| ret += _count_ocp_if_addr_spaces(os); |
| } |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * omap_hwmod_fill_resources - fill struct resource array with hwmod data |
| * @oh: struct omap_hwmod * |
| * @res: pointer to the first element of an array of struct resource to fill |
| * |
| * Fill the struct resource array @res with resource data from the |
| * omap_hwmod @oh. Intended to be called by code that registers |
| * omap_devices. See also omap_hwmod_count_resources(). Returns the |
| * number of array elements filled. |
| */ |
| int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) |
| { |
| struct omap_hwmod_ocp_if *os; |
| struct list_head *p; |
| int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt; |
| int r = 0; |
| |
| /* For each IRQ, DMA, memory area, fill in array.*/ |
| |
| mpu_irqs_cnt = _count_mpu_irqs(oh); |
| for (i = 0; i < mpu_irqs_cnt; i++) { |
| (res + r)->name = (oh->mpu_irqs + i)->name; |
| (res + r)->start = (oh->mpu_irqs + i)->irq; |
| (res + r)->end = (oh->mpu_irqs + i)->irq; |
| (res + r)->flags = IORESOURCE_IRQ; |
| r++; |
| } |
| |
| sdma_reqs_cnt = _count_sdma_reqs(oh); |
| for (i = 0; i < sdma_reqs_cnt; i++) { |
| (res + r)->name = (oh->sdma_reqs + i)->name; |
| (res + r)->start = (oh->sdma_reqs + i)->dma_req; |
| (res + r)->end = (oh->sdma_reqs + i)->dma_req; |
| (res + r)->flags = IORESOURCE_DMA; |
| r++; |
| } |
| |
| p = oh->slave_ports.next; |
| |
| i = 0; |
| while (i < oh->slaves_cnt) { |
| os = _fetch_next_ocp_if(&p, &i); |
| addr_cnt = _count_ocp_if_addr_spaces(os); |
| |
| for (j = 0; j < addr_cnt; j++) { |
| (res + r)->name = (os->addr + j)->name; |
| (res + r)->start = (os->addr + j)->pa_start; |
| (res + r)->end = (os->addr + j)->pa_end; |
| (res + r)->flags = IORESOURCE_MEM; |
| r++; |
| } |
| } |
| |
| return r; |
| } |
| |
| /** |
| * omap_hwmod_fill_dma_resources - fill struct resource array with dma data |
| * @oh: struct omap_hwmod * |
| * @res: pointer to the array of struct resource to fill |
| * |
| * Fill the struct resource array @res with dma resource data from the |
| * omap_hwmod @oh. Intended to be called by code that registers |
| * omap_devices. See also omap_hwmod_count_resources(). Returns the |
| * number of array elements filled. |
| */ |
| int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res) |
| { |
| int i, sdma_reqs_cnt; |
| int r = 0; |
| |
| sdma_reqs_cnt = _count_sdma_reqs(oh); |
| for (i = 0; i < sdma_reqs_cnt; i++) { |
| (res + r)->name = (oh->sdma_reqs + i)->name; |
| (res + r)->start = (oh->sdma_reqs + i)->dma_req; |
| (res + r)->end = (oh->sdma_reqs + i)->dma_req; |
| (res + r)->flags = IORESOURCE_DMA; |
| r++; |
| } |
| |
| return r; |
| } |
| |
| /** |
| * omap_hwmod_get_resource_byname - fetch IP block integration data by name |
| * @oh: struct omap_hwmod * to operate on |
| * @type: one of the IORESOURCE_* constants from include/linux/ioport.h |
| * @name: pointer to the name of the data to fetch (optional) |
| * @rsrc: pointer to a struct resource, allocated by the caller |
| * |
| * Retrieve MPU IRQ, SDMA request line, or address space start/end |
| * data for the IP block pointed to by @oh. The data will be filled |
| * into a struct resource record pointed to by @rsrc. The struct |
| * resource must be allocated by the caller. When @name is non-null, |
| * the data associated with the matching entry in the IRQ/SDMA/address |
| * space hwmod data arrays will be returned. If @name is null, the |
| * first array entry will be returned. Data order is not meaningful |
| * in hwmod data, so callers are strongly encouraged to use a non-null |
| * @name whenever possible to avoid unpredictable effects if hwmod |
| * data is later added that causes data ordering to change. This |
| * function is only intended for use by OMAP core code. Device |
| * drivers should not call this function - the appropriate bus-related |
| * data accessor functions should be used instead. Returns 0 upon |
| * success or a negative error code upon error. |
| */ |
| int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, |
| const char *name, struct resource *rsrc) |
| { |
| int r; |
| unsigned int irq, dma; |
| u32 pa_start, pa_end; |
| |
| if (!oh || !rsrc) |
| return -EINVAL; |
| |
| if (type == IORESOURCE_IRQ) { |
| r = _get_mpu_irq_by_name(oh, name, &irq); |
| if (r) |
| return r; |
| |
| rsrc->start = irq; |
| rsrc->end = irq; |
| } else if (type == IORESOURCE_DMA) { |
| r = _get_sdma_req_by_name(oh, name, &dma); |
| if (r) |
| return r; |
| |
| rsrc->start = dma; |
| rsrc->end = dma; |
| } else if (type == IORESOURCE_MEM) { |
| r = _get_addr_space_by_name(oh, name, &pa_start, &pa_end); |
| if (r) |
| return r; |
| |
| rsrc->start = pa_start; |
| rsrc->end = pa_end; |
| } else { |
| return -EINVAL; |
| } |
| |
| rsrc->flags = type; |
| rsrc->name = name; |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain |
| * @oh: struct omap_hwmod * |
| * |
| * Return the powerdomain pointer associated with the OMAP module |
| * @oh's main clock. If @oh does not have a main clk, return the |
| * powerdomain associated with the interface clock associated with the |
| * module's MPU port. (XXX Perhaps this should use the SDMA port |
| * instead?) Returns NULL on error, or a struct powerdomain * on |
| * success. |
| */ |
| struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) |
| { |
| struct clk *c; |
| struct omap_hwmod_ocp_if *oi; |
| struct clockdomain *clkdm; |
| struct clk_hw_omap *clk; |
| |
| if (!oh) |
| return NULL; |
| |
| if (oh->clkdm) |
| return oh->clkdm->pwrdm.ptr; |
| |
| if (oh->_clk) { |
| c = oh->_clk; |
| } else { |
| oi = _find_mpu_rt_port(oh); |
| if (!oi) |
| return NULL; |
| c = oi->_clk; |
| } |
| |
| clk = to_clk_hw_omap(__clk_get_hw(c)); |
| clkdm = clk->clkdm; |
| if (!clkdm) |
| return NULL; |
| |
| return clkdm->pwrdm.ptr; |
| } |
| |
| /** |
| * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU) |
| * @oh: struct omap_hwmod * |
| * |
| * Returns the virtual address corresponding to the beginning of the |
| * module's register target, in the address range that is intended to |
| * be used by the MPU. Returns the virtual address upon success or NULL |
| * upon error. |
| */ |
| void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh) |
| { |
| if (!oh) |
| return NULL; |
| |
| if (oh->_int_flags & _HWMOD_NO_MPU_PORT) |
| return NULL; |
| |
| if (oh->_state == _HWMOD_STATE_UNKNOWN) |
| return NULL; |
| |
| return oh->_mpu_rt_va; |
| } |
| |
| /** |
| * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh |
| * @oh: struct omap_hwmod * |
| * @init_oh: struct omap_hwmod * (initiator) |
| * |
| * Add a sleep dependency between the initiator @init_oh and @oh. |
| * Intended to be called by DSP/Bridge code via platform_data for the |
| * DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge |
| * code needs to add/del initiator dependencies dynamically |
| * before/after accessing a device. Returns the return value from |
| * _add_initiator_dep(). |
| * |
| * XXX Keep a usecount in the clockdomain code |
| */ |
| int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, |
| struct omap_hwmod *init_oh) |
| { |
| return _add_initiator_dep(oh, init_oh); |
| } |
| |
| /* |
| * XXX what about functions for drivers to save/restore ocp_sysconfig |
| * for context save/restore operations? |
| */ |
| |
| /** |
| * omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh |
| * @oh: struct omap_hwmod * |
| * @init_oh: struct omap_hwmod * (initiator) |
| * |
| * Remove a sleep dependency between the initiator @init_oh and @oh. |
| * Intended to be called by DSP/Bridge code via platform_data for the |
| * DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge |
| * code needs to add/del initiator dependencies dynamically |
| * before/after accessing a device. Returns the return value from |
| * _del_initiator_dep(). |
| * |
| * XXX Keep a usecount in the clockdomain code |
| */ |
| int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, |
| struct omap_hwmod *init_oh) |
| { |
| return _del_initiator_dep(oh, init_oh); |
| } |
| |
| /** |
| * omap_hwmod_enable_wakeup - allow device to wake up the system |
| * @oh: struct omap_hwmod * |
| * |
| * Sets the module OCP socket ENAWAKEUP bit to allow the module to |
| * send wakeups to the PRCM, and enable I/O ring wakeup events for |
| * this IP block if it has dynamic mux entries. Eventually this |
| * should set PRCM wakeup registers to cause the PRCM to receive |
| * wakeup events from the module. Does not set any wakeup routing |
| * registers beyond this point - if the module is to wake up any other |
| * module or subsystem, that must be set separately. Called by |
| * omap_device code. Returns -EINVAL on error or 0 upon success. |
| */ |
| int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) |
| { |
| unsigned long flags; |
| u32 v; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| |
| if (oh->class->sysc && |
| (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { |
| v = oh->_sysc_cache; |
| _enable_wakeup(oh, &v); |
| _write_sysconfig(v, oh); |
| } |
| |
| _set_idle_ioring_wakeup(oh, true); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_disable_wakeup - prevent device from waking the system |
| * @oh: struct omap_hwmod * |
| * |
| * Clears the module OCP socket ENAWAKEUP bit to prevent the module |
| * from sending wakeups to the PRCM, and disable I/O ring wakeup |
| * events for this IP block if it has dynamic mux entries. Eventually |
| * this should clear PRCM wakeup registers to cause the PRCM to ignore |
| * wakeup events from the module. Does not set any wakeup routing |
| * registers beyond this point - if the module is to wake up any other |
| * module or subsystem, that must be set separately. Called by |
| * omap_device code. Returns -EINVAL on error or 0 upon success. |
| */ |
| int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) |
| { |
| unsigned long flags; |
| u32 v; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| |
| if (oh->class->sysc && |
| (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) { |
| v = oh->_sysc_cache; |
| _disable_wakeup(oh, &v); |
| _write_sysconfig(v, oh); |
| } |
| |
| _set_idle_ioring_wakeup(oh, false); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_assert_hardreset - assert the HW reset line of submodules |
| * contained in the hwmod module. |
| * @oh: struct omap_hwmod * |
| * @name: name of the reset line to lookup and assert |
| * |
| * Some IP like dsp, ipu or iva contain processor that require |
| * an HW reset line to be assert / deassert in order to enable fully |
| * the IP. Returns -EINVAL if @oh is null or if the operation is not |
| * yet supported on this OMAP; otherwise, passes along the return value |
| * from _assert_hardreset(). |
| */ |
| int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name) |
| { |
| int ret; |
| unsigned long flags; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| ret = _assert_hardreset(oh, name); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return ret; |
| } |
| |
| /** |
| * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules |
| * contained in the hwmod module. |
| * @oh: struct omap_hwmod * |
| * @name: name of the reset line to look up and deassert |
| * |
| * Some IP like dsp, ipu or iva contain processor that require |
| * an HW reset line to be assert / deassert in order to enable fully |
| * the IP. Returns -EINVAL if @oh is null or if the operation is not |
| * yet supported on this OMAP; otherwise, passes along the return value |
| * from _deassert_hardreset(). |
| */ |
| int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name) |
| { |
| int ret; |
| unsigned long flags; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| ret = _deassert_hardreset(oh, name); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return ret; |
| } |
| |
| /** |
| * omap_hwmod_read_hardreset - read the HW reset line state of submodules |
| * contained in the hwmod module |
| * @oh: struct omap_hwmod * |
| * @name: name of the reset line to look up and read |
| * |
| * Return the current state of the hwmod @oh's reset line named @name: |
| * returns -EINVAL upon parameter error or if this operation |
| * is unsupported on the current OMAP; otherwise, passes along the return |
| * value from _read_hardreset(). |
| */ |
| int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name) |
| { |
| int ret; |
| unsigned long flags; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| ret = _read_hardreset(oh, name); |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return ret; |
| } |
| |
| |
| /** |
| * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname |
| * @classname: struct omap_hwmod_class name to search for |
| * @fn: callback function pointer to call for each hwmod in class @classname |
| * @user: arbitrary context data to pass to the callback function |
| * |
| * For each omap_hwmod of class @classname, call @fn. |
| * If the callback function returns something other than |
| * zero, the iterator is terminated, and the callback function's return |
| * value is passed back to the caller. Returns 0 upon success, -EINVAL |
| * if @classname or @fn are NULL, or passes back the error code from @fn. |
| */ |
| int omap_hwmod_for_each_by_class(const char *classname, |
| int (*fn)(struct omap_hwmod *oh, |
| void *user), |
| void *user) |
| { |
| struct omap_hwmod *temp_oh; |
| int ret = 0; |
| |
| if (!classname || !fn) |
| return -EINVAL; |
| |
| pr_debug("omap_hwmod: %s: looking for modules of class %s\n", |
| __func__, classname); |
| |
| list_for_each_entry(temp_oh, &omap_hwmod_list, node) { |
| if (!strcmp(temp_oh->class->name, classname)) { |
| pr_debug("omap_hwmod: %s: %s: calling callback fn\n", |
| __func__, temp_oh->name); |
| ret = (*fn)(temp_oh, user); |
| if (ret) |
| break; |
| } |
| } |
| |
| if (ret) |
| pr_debug("omap_hwmod: %s: iterator terminated early: %d\n", |
| __func__, ret); |
| |
| return ret; |
| } |
| |
| /** |
| * omap_hwmod_set_postsetup_state - set the post-_setup() state for this hwmod |
| * @oh: struct omap_hwmod * |
| * @state: state that _setup() should leave the hwmod in |
| * |
| * Sets the hwmod state that @oh will enter at the end of _setup() |
| * (called by omap_hwmod_setup_*()). See also the documentation |
| * for _setup_postsetup(), above. Returns 0 upon success or |
| * -EINVAL if there is a problem with the arguments or if the hwmod is |
| * in the wrong state. |
| */ |
| int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state) |
| { |
| int ret; |
| unsigned long flags; |
| |
| if (!oh) |
| return -EINVAL; |
| |
| if (state != _HWMOD_STATE_DISABLED && |
| state != _HWMOD_STATE_ENABLED && |
| state != _HWMOD_STATE_IDLE) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&oh->_lock, flags); |
| |
| if (oh->_state != _HWMOD_STATE_REGISTERED) { |
| ret = -EINVAL; |
| goto ohsps_unlock; |
| } |
| |
| oh->_postsetup_state = state; |
| ret = 0; |
| |
| ohsps_unlock: |
| spin_unlock_irqrestore(&oh->_lock, flags); |
| |
| return ret; |
| } |
| |
| /** |
| * omap_hwmod_get_context_loss_count - get lost context count |
| * @oh: struct omap_hwmod * |
| * |
| * Returns the context loss count of associated @oh |
| * upon success, or zero if no context loss data is available. |
| * |
| * On OMAP4, this queries the per-hwmod context loss register, |
| * assuming one exists. If not, or on OMAP2/3, this queries the |
| * enclosing powerdomain context loss count. |
| */ |
| int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) |
| { |
| struct powerdomain *pwrdm; |
| int ret = 0; |
| |
| if (soc_ops.get_context_lost) |
| return soc_ops.get_context_lost(oh); |
| |
| pwrdm = omap_hwmod_get_pwrdm(oh); |
| if (pwrdm) |
| ret = pwrdm_get_context_loss_count(pwrdm); |
| |
| return ret; |
| } |
| |
| /** |
| * omap_hwmod_no_setup_reset - prevent a hwmod from being reset upon setup |
| * @oh: struct omap_hwmod * |
| * |
| * Prevent the hwmod @oh from being reset during the setup process. |
| * Intended for use by board-*.c files on boards with devices that |
| * cannot tolerate being reset. Must be called before the hwmod has |
| * been set up. Returns 0 upon success or negative error code upon |
| * failure. |
| */ |
| int omap_hwmod_no_setup_reset(struct omap_hwmod *oh) |
| { |
| if (!oh) |
| return -EINVAL; |
| |
| if (oh->_state != _HWMOD_STATE_REGISTERED) { |
| pr_err("omap_hwmod: %s: cannot prevent setup reset; in wrong state\n", |
| oh->name); |
| return -EINVAL; |
| } |
| |
| oh->flags |= HWMOD_INIT_NO_RESET; |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_pad_route_irq - route an I/O pad wakeup to a particular MPU IRQ |
| * @oh: struct omap_hwmod * containing hwmod mux entries |
| * @pad_idx: array index in oh->mux of the hwmod mux entry to route wakeup |
| * @irq_idx: the hwmod mpu_irqs array index of the IRQ to trigger on wakeup |
| * |
| * When an I/O pad wakeup arrives for the dynamic or wakeup hwmod mux |
| * entry number @pad_idx for the hwmod @oh, trigger the interrupt |
| * service routine for the hwmod's mpu_irqs array index @irq_idx. If |
| * this function is not called for a given pad_idx, then the ISR |
| * associated with @oh's first MPU IRQ will be triggered when an I/O |
| * pad wakeup occurs on that pad. Note that @pad_idx is the index of |
| * the _dynamic or wakeup_ entry: if there are other entries not |
| * marked with OMAP_DEVICE_PAD_WAKEUP or OMAP_DEVICE_PAD_REMUX, these |
| * entries are NOT COUNTED in the dynamic pad index. This function |
| * must be called separately for each pad that requires its interrupt |
| * to be re-routed this way. Returns -EINVAL if there is an argument |
| * problem or if @oh does not have hwmod mux entries or MPU IRQs; |
| * returns -ENOMEM if memory cannot be allocated; or 0 upon success. |
| * |
| * XXX This function interface is fragile. Rather than using array |
| * indexes, which are subject to unpredictable change, it should be |
| * using hwmod IRQ names, and some other stable key for the hwmod mux |
| * pad records. |
| */ |
| int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) |
| { |
| int nr_irqs; |
| |
| might_sleep(); |
| |
| if (!oh || !oh->mux || !oh->mpu_irqs || pad_idx < 0 || |
| pad_idx >= oh->mux->nr_pads_dynamic) |
| return -EINVAL; |
| |
| /* Check the number of available mpu_irqs */ |
| for (nr_irqs = 0; oh->mpu_irqs[nr_irqs].irq >= 0; nr_irqs++) |
| ; |
| |
| if (irq_idx >= nr_irqs) |
| return -EINVAL; |
| |
| if (!oh->mux->irqs) { |
| /* XXX What frees this? */ |
| oh->mux->irqs = kzalloc(sizeof(int) * oh->mux->nr_pads_dynamic, |
| GFP_KERNEL); |
| if (!oh->mux->irqs) |
| return -ENOMEM; |
| } |
| oh->mux->irqs[pad_idx] = irq_idx; |
| |
| return 0; |
| } |
| |
| /** |
| * omap_hwmod_init - initialize the hwmod code |
| * |
| * Sets up some function pointers needed by the hwmod code to operate on the |
| * currently-booted SoC. Intended to be called once during kernel init |
| * before any hwmods are registered. No return value. |
| */ |
| void __init omap_hwmod_init(void) |
| { |
| if (cpu_is_omap24xx()) { |
| soc_ops.wait_target_ready = _omap2xxx_wait_target_ready; |
| soc_ops.assert_hardreset = _omap2_assert_hardreset; |
| soc_ops.deassert_hardreset = _omap2_deassert_hardreset; |
| soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; |
| } else if (cpu_is_omap34xx()) { |
| soc_ops.wait_target_ready = _omap3xxx_wait_target_ready; |
| soc_ops.assert_hardreset = _omap2_assert_hardreset; |
| soc_ops.deassert_hardreset = _omap2_deassert_hardreset; |
| soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; |
| soc_ops.init_clkdm = _init_clkdm; |
| } else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) { |
| soc_ops.enable_module = _omap4_enable_module; |
| soc_ops.disable_module = _omap4_disable_module; |
| soc_ops.wait_target_ready = _omap4_wait_target_ready; |
| soc_ops.assert_hardreset = _omap4_assert_hardreset; |
| soc_ops.deassert_hardreset = _omap4_deassert_hardreset; |
| soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; |
| soc_ops.init_clkdm = _init_clkdm; |
| soc_ops.update_context_lost = _omap4_update_context_lost; |
| soc_ops.get_context_lost = _omap4_get_context_lost; |
| } else if (soc_is_am43xx()) { |
| soc_ops.enable_module = _omap4_enable_module; |
| soc_ops.disable_module = _omap4_disable_module; |
| soc_ops.wait_target_ready = _omap4_wait_target_ready; |
| soc_ops.assert_hardreset = _am33xx_assert_hardreset; |
| soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; |
| soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; |
| soc_ops.init_clkdm = _init_clkdm; |
| } else if (soc_is_am33xx()) { |
| soc_ops.enable_module = _am33xx_enable_module; |
| soc_ops.disable_module = _am33xx_disable_module; |
| soc_ops.wait_target_ready = _am33xx_wait_target_ready; |
| soc_ops.assert_hardreset = _am33xx_assert_hardreset; |
| soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; |
| soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; |
| soc_ops.init_clkdm = _init_clkdm; |
| } else { |
| WARN(1, "omap_hwmod: unknown SoC type\n"); |
| } |
| |
| inited = true; |
| } |
| |
| /** |
| * omap_hwmod_get_main_clk - get pointer to main clock name |
| * @oh: struct omap_hwmod * |
| * |
| * Returns the main clock name assocated with @oh upon success, |
| * or NULL if @oh is NULL. |
| */ |
| const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh) |
| { |
| if (!oh) |
| return NULL; |
| |
| return oh->main_clk; |
| } |