pinctrl: msm: Add missing sdc1 and sdc3 groups
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/pinctrl/pinctrl-apq8064.c b/drivers/pinctrl/pinctrl-apq8064.c
index 7c2a8ba..519f788 100644
--- a/drivers/pinctrl/pinctrl-apq8064.c
+++ b/drivers/pinctrl/pinctrl-apq8064.c
@@ -109,6 +109,13 @@
PINCTRL_PIN(87, "GPIO_87"),
PINCTRL_PIN(88, "GPIO_88"),
PINCTRL_PIN(89, "GPIO_89"),
+
+ PINCTRL_PIN(90, "SDC1_CLK"),
+ PINCTRL_PIN(91, "SDC1_CMD"),
+ PINCTRL_PIN(92, "SDC1_DATA"),
+ PINCTRL_PIN(93, "SDC3_CLK"),
+ PINCTRL_PIN(94, "SDC3_CMD"),
+ PINCTRL_PIN(95, "SDC3_DATA"),
};
#define DECLARE_APQ_GPIO_PINS(pin) static const unsigned int gpio##pin##_pins[] = { pin }
@@ -203,6 +210,13 @@
DECLARE_APQ_GPIO_PINS(88);
DECLARE_APQ_GPIO_PINS(89);
+static const unsigned int sdc1_clk_pins[] = { 90 };
+static const unsigned int sdc1_cmd_pins[] = { 91 };
+static const unsigned int sdc1_data_pins[] = { 92 };
+static const unsigned int sdc3_clk_pins[] = { 93 };
+static const unsigned int sdc3_cmd_pins[] = { 94 };
+static const unsigned int sdc3_data_pins[] = { 95 };
+
#define FUNCTION(fname) \
[APQ_MUX_##fname] = { \
.name = #fname, \
@@ -250,6 +264,31 @@
.intr_detection_width = 1, \
}
+#define SDC_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = ctl, \
+ .io_reg = 0, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .mux_bit = -1, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
enum apq8064_functions {
APQ_MUX_cam_mclk,
APQ_MUX_codec_mic_i2s,
@@ -514,6 +553,14 @@
PINGROUP(87, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(88, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(89, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+
+ SDC_PINGROUP(sdc1_clk, 0x20a0, 13, 6),
+ SDC_PINGROUP(sdc1_cmd, 0x20a0, 11, 3),
+ SDC_PINGROUP(sdc1_data, 0x20a0, 9, 0),
+
+ SDC_PINGROUP(sdc3_clk, 0x20a4, 14, 6),
+ SDC_PINGROUP(sdc3_cmd, 0x20a4, 11, 3),
+ SDC_PINGROUP(sdc3_data, 0x20a4, 9, 0),
};
#define NUM_GPIO_PINGROUPS 90