| /* |
| * Driver for Intel I82092AA PCI-PCMCIA bridge. |
| * |
| * (C) 2001 Red Hat, Inc. |
| * |
| * Author: Arjan Van De Ven <arjanv@redhat.com> |
| * Loosly based on i82365.c from the pcmcia-cs package |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/workqueue.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| |
| #include <pcmcia/ss.h> |
| |
| #include <asm/io.h> |
| |
| #include "i82092aa.h" |
| #include "i82365.h" |
| |
| MODULE_LICENSE("GPL"); |
| |
| /* PCI core routines */ |
| static DEFINE_PCI_DEVICE_TABLE(i82092aa_pci_ids) = { |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82092AA_0) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(pci, i82092aa_pci_ids); |
| |
| static struct pci_driver i82092aa_pci_driver = { |
| .name = "i82092aa", |
| .id_table = i82092aa_pci_ids, |
| .probe = i82092aa_pci_probe, |
| .remove = i82092aa_pci_remove, |
| }; |
| |
| |
| /* the pccard structure and its functions */ |
| static struct pccard_operations i82092aa_operations = { |
| .init = i82092aa_init, |
| .get_status = i82092aa_get_status, |
| .set_socket = i82092aa_set_socket, |
| .set_io_map = i82092aa_set_io_map, |
| .set_mem_map = i82092aa_set_mem_map, |
| }; |
| |
| /* The card can do up to 4 sockets, allocate a structure for each of them */ |
| |
| struct socket_info { |
| int number; |
| int card_state; /* 0 = no socket, |
| 1 = empty socket, |
| 2 = card but not initialized, |
| 3 = operational card */ |
| unsigned int io_base; /* base io address of the socket */ |
| |
| struct pcmcia_socket socket; |
| struct pci_dev *dev; /* The PCI device for the socket */ |
| }; |
| |
| #define MAX_SOCKETS 4 |
| static struct socket_info sockets[MAX_SOCKETS]; |
| static int socket_count; /* shortcut */ |
| |
| |
| static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| unsigned char configbyte; |
| int i, ret; |
| |
| enter("i82092aa_pci_probe"); |
| |
| if ((ret = pci_enable_device(dev))) |
| return ret; |
| |
| pci_read_config_byte(dev, 0x40, &configbyte); /* PCI Configuration Control */ |
| switch(configbyte&6) { |
| case 0: |
| socket_count = 2; |
| break; |
| case 2: |
| socket_count = 1; |
| break; |
| case 4: |
| case 6: |
| socket_count = 4; |
| break; |
| |
| default: |
| printk(KERN_ERR "i82092aa: Oops, you did something we didn't think of.\n"); |
| ret = -EIO; |
| goto err_out_disable; |
| } |
| printk(KERN_INFO "i82092aa: configured as a %d socket device.\n", socket_count); |
| |
| if (!request_region(pci_resource_start(dev, 0), 2, "i82092aa")) { |
| ret = -EBUSY; |
| goto err_out_disable; |
| } |
| |
| for (i = 0;i<socket_count;i++) { |
| sockets[i].card_state = 1; /* 1 = present but empty */ |
| sockets[i].io_base = pci_resource_start(dev, 0); |
| sockets[i].socket.features |= SS_CAP_PCCARD; |
| sockets[i].socket.map_size = 0x1000; |
| sockets[i].socket.irq_mask = 0; |
| sockets[i].socket.pci_irq = dev->irq; |
| sockets[i].socket.cb_dev = dev; |
| sockets[i].socket.owner = THIS_MODULE; |
| |
| sockets[i].number = i; |
| |
| if (card_present(i)) { |
| sockets[i].card_state = 3; |
| dprintk(KERN_DEBUG "i82092aa: slot %i is occupied\n",i); |
| } else { |
| dprintk(KERN_DEBUG "i82092aa: slot %i is vacant\n",i); |
| } |
| } |
| |
| /* Now, specifiy that all interrupts are to be done as PCI interrupts */ |
| configbyte = 0xFF; /* bitmask, one bit per event, 1 = PCI interrupt, 0 = ISA interrupt */ |
| pci_write_config_byte(dev, 0x50, configbyte); /* PCI Interrupt Routing Register */ |
| |
| /* Register the interrupt handler */ |
| dprintk(KERN_DEBUG "Requesting interrupt %i \n",dev->irq); |
| if ((ret = request_irq(dev->irq, i82092aa_interrupt, IRQF_SHARED, "i82092aa", i82092aa_interrupt))) { |
| printk(KERN_ERR "i82092aa: Failed to register IRQ %d, aborting\n", dev->irq); |
| goto err_out_free_res; |
| } |
| |
| pci_set_drvdata(dev, &sockets[i].socket); |
| |
| for (i = 0; i<socket_count; i++) { |
| sockets[i].socket.dev.parent = &dev->dev; |
| sockets[i].socket.ops = &i82092aa_operations; |
| sockets[i].socket.resource_ops = &pccard_nonstatic_ops; |
| ret = pcmcia_register_socket(&sockets[i].socket); |
| if (ret) { |
| goto err_out_free_sockets; |
| } |
| } |
| |
| leave("i82092aa_pci_probe"); |
| return 0; |
| |
| err_out_free_sockets: |
| if (i) { |
| for (i--;i>=0;i--) { |
| pcmcia_unregister_socket(&sockets[i].socket); |
| } |
| } |
| free_irq(dev->irq, i82092aa_interrupt); |
| err_out_free_res: |
| release_region(pci_resource_start(dev, 0), 2); |
| err_out_disable: |
| pci_disable_device(dev); |
| return ret; |
| } |
| |
| static void i82092aa_pci_remove(struct pci_dev *dev) |
| { |
| struct pcmcia_socket *socket = pci_get_drvdata(dev); |
| |
| enter("i82092aa_pci_remove"); |
| |
| free_irq(dev->irq, i82092aa_interrupt); |
| |
| if (socket) |
| pcmcia_unregister_socket(socket); |
| |
| leave("i82092aa_pci_remove"); |
| } |
| |
| static DEFINE_SPINLOCK(port_lock); |
| |
| /* basic value read/write functions */ |
| |
| static unsigned char indirect_read(int socket, unsigned short reg) |
| { |
| unsigned short int port; |
| unsigned char val; |
| unsigned long flags; |
| spin_lock_irqsave(&port_lock,flags); |
| reg += socket * 0x40; |
| port = sockets[socket].io_base; |
| outb(reg,port); |
| val = inb(port+1); |
| spin_unlock_irqrestore(&port_lock,flags); |
| return val; |
| } |
| |
| #if 0 |
| static unsigned short indirect_read16(int socket, unsigned short reg) |
| { |
| unsigned short int port; |
| unsigned short tmp; |
| unsigned long flags; |
| spin_lock_irqsave(&port_lock,flags); |
| reg = reg + socket * 0x40; |
| port = sockets[socket].io_base; |
| outb(reg,port); |
| tmp = inb(port+1); |
| reg++; |
| outb(reg,port); |
| tmp = tmp | (inb(port+1)<<8); |
| spin_unlock_irqrestore(&port_lock,flags); |
| return tmp; |
| } |
| #endif |
| |
| static void indirect_write(int socket, unsigned short reg, unsigned char value) |
| { |
| unsigned short int port; |
| unsigned long flags; |
| spin_lock_irqsave(&port_lock,flags); |
| reg = reg + socket * 0x40; |
| port = sockets[socket].io_base; |
| outb(reg,port); |
| outb(value,port+1); |
| spin_unlock_irqrestore(&port_lock,flags); |
| } |
| |
| static void indirect_setbit(int socket, unsigned short reg, unsigned char mask) |
| { |
| unsigned short int port; |
| unsigned char val; |
| unsigned long flags; |
| spin_lock_irqsave(&port_lock,flags); |
| reg = reg + socket * 0x40; |
| port = sockets[socket].io_base; |
| outb(reg,port); |
| val = inb(port+1); |
| val |= mask; |
| outb(reg,port); |
| outb(val,port+1); |
| spin_unlock_irqrestore(&port_lock,flags); |
| } |
| |
| |
| static void indirect_resetbit(int socket, unsigned short reg, unsigned char mask) |
| { |
| unsigned short int port; |
| unsigned char val; |
| unsigned long flags; |
| spin_lock_irqsave(&port_lock,flags); |
| reg = reg + socket * 0x40; |
| port = sockets[socket].io_base; |
| outb(reg,port); |
| val = inb(port+1); |
| val &= ~mask; |
| outb(reg,port); |
| outb(val,port+1); |
| spin_unlock_irqrestore(&port_lock,flags); |
| } |
| |
| static void indirect_write16(int socket, unsigned short reg, unsigned short value) |
| { |
| unsigned short int port; |
| unsigned char val; |
| unsigned long flags; |
| spin_lock_irqsave(&port_lock,flags); |
| reg = reg + socket * 0x40; |
| port = sockets[socket].io_base; |
| |
| outb(reg,port); |
| val = value & 255; |
| outb(val,port+1); |
| |
| reg++; |
| |
| outb(reg,port); |
| val = value>>8; |
| outb(val,port+1); |
| spin_unlock_irqrestore(&port_lock,flags); |
| } |
| |
| /* simple helper functions */ |
| /* External clock time, in nanoseconds. 120 ns = 8.33 MHz */ |
| static int cycle_time = 120; |
| |
| static int to_cycles(int ns) |
| { |
| if (cycle_time!=0) |
| return ns/cycle_time; |
| else |
| return 0; |
| } |
| |
| |
| /* Interrupt handler functionality */ |
| |
| static irqreturn_t i82092aa_interrupt(int irq, void *dev) |
| { |
| int i; |
| int loopcount = 0; |
| int handled = 0; |
| |
| unsigned int events, active=0; |
| |
| /* enter("i82092aa_interrupt");*/ |
| |
| while (1) { |
| loopcount++; |
| if (loopcount>20) { |
| printk(KERN_ERR "i82092aa: infinite eventloop in interrupt \n"); |
| break; |
| } |
| |
| active = 0; |
| |
| for (i=0;i<socket_count;i++) { |
| int csc; |
| if (sockets[i].card_state==0) /* Inactive socket, should not happen */ |
| continue; |
| |
| csc = indirect_read(i,I365_CSC); /* card status change register */ |
| |
| if (csc==0) /* no events on this socket */ |
| continue; |
| handled = 1; |
| events = 0; |
| |
| if (csc & I365_CSC_DETECT) { |
| events |= SS_DETECT; |
| printk("Card detected in socket %i!\n",i); |
| } |
| |
| if (indirect_read(i,I365_INTCTL) & I365_PC_IOCARD) { |
| /* For IO/CARDS, bit 0 means "read the card" */ |
| events |= (csc & I365_CSC_STSCHG) ? SS_STSCHG : 0; |
| } else { |
| /* Check for battery/ready events */ |
| events |= (csc & I365_CSC_BVD1) ? SS_BATDEAD : 0; |
| events |= (csc & I365_CSC_BVD2) ? SS_BATWARN : 0; |
| events |= (csc & I365_CSC_READY) ? SS_READY : 0; |
| } |
| |
| if (events) { |
| pcmcia_parse_events(&sockets[i].socket, events); |
| } |
| active |= events; |
| } |
| |
| if (active==0) /* no more events to handle */ |
| break; |
| |
| } |
| return IRQ_RETVAL(handled); |
| /* leave("i82092aa_interrupt");*/ |
| } |
| |
| |
| |
| /* socket functions */ |
| |
| static int card_present(int socketno) |
| { |
| unsigned int val; |
| enter("card_present"); |
| |
| if ((socketno<0) || (socketno >= MAX_SOCKETS)) |
| return 0; |
| if (sockets[socketno].io_base == 0) |
| return 0; |
| |
| |
| val = indirect_read(socketno, 1); /* Interface status register */ |
| if ((val&12)==12) { |
| leave("card_present 1"); |
| return 1; |
| } |
| |
| leave("card_present 0"); |
| return 0; |
| } |
| |
| static void set_bridge_state(int sock) |
| { |
| enter("set_bridge_state"); |
| indirect_write(sock, I365_GBLCTL,0x00); |
| indirect_write(sock, I365_GENCTL,0x00); |
| |
| indirect_setbit(sock, I365_INTCTL,0x08); |
| leave("set_bridge_state"); |
| } |
| |
| |
| |
| |
| |
| |
| static int i82092aa_init(struct pcmcia_socket *sock) |
| { |
| int i; |
| struct resource res = { .start = 0, .end = 0x0fff }; |
| pccard_io_map io = { 0, 0, 0, 0, 1 }; |
| pccard_mem_map mem = { .res = &res, }; |
| |
| enter("i82092aa_init"); |
| |
| for (i = 0; i < 2; i++) { |
| io.map = i; |
| i82092aa_set_io_map(sock, &io); |
| } |
| for (i = 0; i < 5; i++) { |
| mem.map = i; |
| i82092aa_set_mem_map(sock, &mem); |
| } |
| |
| leave("i82092aa_init"); |
| return 0; |
| } |
| |
| static int i82092aa_get_status(struct pcmcia_socket *socket, u_int *value) |
| { |
| unsigned int sock = container_of(socket, struct socket_info, socket)->number; |
| unsigned int status; |
| |
| enter("i82092aa_get_status"); |
| |
| status = indirect_read(sock,I365_STATUS); /* Interface Status Register */ |
| *value = 0; |
| |
| if ((status & I365_CS_DETECT) == I365_CS_DETECT) { |
| *value |= SS_DETECT; |
| } |
| |
| /* IO cards have a different meaning of bits 0,1 */ |
| /* Also notice the inverse-logic on the bits */ |
| if (indirect_read(sock, I365_INTCTL) & I365_PC_IOCARD) { |
| /* IO card */ |
| if (!(status & I365_CS_STSCHG)) |
| *value |= SS_STSCHG; |
| } else { /* non I/O card */ |
| if (!(status & I365_CS_BVD1)) |
| *value |= SS_BATDEAD; |
| if (!(status & I365_CS_BVD2)) |
| *value |= SS_BATWARN; |
| |
| } |
| |
| if (status & I365_CS_WRPROT) |
| (*value) |= SS_WRPROT; /* card is write protected */ |
| |
| if (status & I365_CS_READY) |
| (*value) |= SS_READY; /* card is not busy */ |
| |
| if (status & I365_CS_POWERON) |
| (*value) |= SS_POWERON; /* power is applied to the card */ |
| |
| |
| leave("i82092aa_get_status"); |
| return 0; |
| } |
| |
| |
| static int i82092aa_set_socket(struct pcmcia_socket *socket, socket_state_t *state) |
| { |
| unsigned int sock = container_of(socket, struct socket_info, socket)->number; |
| unsigned char reg; |
| |
| enter("i82092aa_set_socket"); |
| |
| /* First, set the global controller options */ |
| |
| set_bridge_state(sock); |
| |
| /* Values for the IGENC register */ |
| |
| reg = 0; |
| if (!(state->flags & SS_RESET)) /* The reset bit has "inverse" logic */ |
| reg = reg | I365_PC_RESET; |
| if (state->flags & SS_IOCARD) |
| reg = reg | I365_PC_IOCARD; |
| |
| indirect_write(sock,I365_INTCTL,reg); /* IGENC, Interrupt and General Control Register */ |
| |
| /* Power registers */ |
| |
| reg = I365_PWR_NORESET; /* default: disable resetdrv on resume */ |
| |
| if (state->flags & SS_PWR_AUTO) { |
| printk("Auto power\n"); |
| reg |= I365_PWR_AUTO; /* automatic power mngmnt */ |
| } |
| if (state->flags & SS_OUTPUT_ENA) { |
| printk("Power Enabled \n"); |
| reg |= I365_PWR_OUT; /* enable power */ |
| } |
| |
| switch (state->Vcc) { |
| case 0: |
| break; |
| case 50: |
| printk("setting voltage to Vcc to 5V on socket %i\n",sock); |
| reg |= I365_VCC_5V; |
| break; |
| default: |
| printk("i82092aa: i82092aa_set_socket called with invalid VCC power value: %i ", state->Vcc); |
| leave("i82092aa_set_socket"); |
| return -EINVAL; |
| } |
| |
| |
| switch (state->Vpp) { |
| case 0: |
| printk("not setting Vpp on socket %i\n",sock); |
| break; |
| case 50: |
| printk("setting Vpp to 5.0 for socket %i\n",sock); |
| reg |= I365_VPP1_5V | I365_VPP2_5V; |
| break; |
| case 120: |
| printk("setting Vpp to 12.0\n"); |
| reg |= I365_VPP1_12V | I365_VPP2_12V; |
| break; |
| default: |
| printk("i82092aa: i82092aa_set_socket called with invalid VPP power value: %i ", state->Vcc); |
| leave("i82092aa_set_socket"); |
| return -EINVAL; |
| } |
| |
| if (reg != indirect_read(sock,I365_POWER)) /* only write if changed */ |
| indirect_write(sock,I365_POWER,reg); |
| |
| /* Enable specific interrupt events */ |
| |
| reg = 0x00; |
| if (state->csc_mask & SS_DETECT) { |
| reg |= I365_CSC_DETECT; |
| } |
| if (state->flags & SS_IOCARD) { |
| if (state->csc_mask & SS_STSCHG) |
| reg |= I365_CSC_STSCHG; |
| } else { |
| if (state->csc_mask & SS_BATDEAD) |
| reg |= I365_CSC_BVD1; |
| if (state->csc_mask & SS_BATWARN) |
| reg |= I365_CSC_BVD2; |
| if (state->csc_mask & SS_READY) |
| reg |= I365_CSC_READY; |
| |
| } |
| |
| /* now write the value and clear the (probably bogus) pending stuff by doing a dummy read*/ |
| |
| indirect_write(sock,I365_CSCINT,reg); |
| (void)indirect_read(sock,I365_CSC); |
| |
| leave("i82092aa_set_socket"); |
| return 0; |
| } |
| |
| static int i82092aa_set_io_map(struct pcmcia_socket *socket, struct pccard_io_map *io) |
| { |
| unsigned int sock = container_of(socket, struct socket_info, socket)->number; |
| unsigned char map, ioctl; |
| |
| enter("i82092aa_set_io_map"); |
| |
| map = io->map; |
| |
| /* Check error conditions */ |
| if (map > 1) { |
| leave("i82092aa_set_io_map with invalid map"); |
| return -EINVAL; |
| } |
| if ((io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)){ |
| leave("i82092aa_set_io_map with invalid io"); |
| return -EINVAL; |
| } |
| |
| /* Turn off the window before changing anything */ |
| if (indirect_read(sock, I365_ADDRWIN) & I365_ENA_IO(map)) |
| indirect_resetbit(sock, I365_ADDRWIN, I365_ENA_IO(map)); |
| |
| /* printk("set_io_map: Setting range to %x - %x \n",io->start,io->stop); */ |
| |
| /* write the new values */ |
| indirect_write16(sock,I365_IO(map)+I365_W_START,io->start); |
| indirect_write16(sock,I365_IO(map)+I365_W_STOP,io->stop); |
| |
| ioctl = indirect_read(sock,I365_IOCTL) & ~I365_IOCTL_MASK(map); |
| |
| if (io->flags & (MAP_16BIT|MAP_AUTOSZ)) |
| ioctl |= I365_IOCTL_16BIT(map); |
| |
| indirect_write(sock,I365_IOCTL,ioctl); |
| |
| /* Turn the window back on if needed */ |
| if (io->flags & MAP_ACTIVE) |
| indirect_setbit(sock,I365_ADDRWIN,I365_ENA_IO(map)); |
| |
| leave("i82092aa_set_io_map"); |
| return 0; |
| } |
| |
| static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_map *mem) |
| { |
| struct socket_info *sock_info = container_of(socket, struct socket_info, socket); |
| unsigned int sock = sock_info->number; |
| struct pci_bus_region region; |
| unsigned short base, i; |
| unsigned char map; |
| |
| enter("i82092aa_set_mem_map"); |
| |
| pcibios_resource_to_bus(sock_info->dev, ®ion, mem->res); |
| |
| map = mem->map; |
| if (map > 4) { |
| leave("i82092aa_set_mem_map: invalid map"); |
| return -EINVAL; |
| } |
| |
| |
| if ( (mem->card_start > 0x3ffffff) || (region.start > region.end) || |
| (mem->speed > 1000) ) { |
| leave("i82092aa_set_mem_map: invalid address / speed"); |
| printk("invalid mem map for socket %i: %llx to %llx with a " |
| "start of %x\n", |
| sock, |
| (unsigned long long)region.start, |
| (unsigned long long)region.end, |
| mem->card_start); |
| return -EINVAL; |
| } |
| |
| /* Turn off the window before changing anything */ |
| if (indirect_read(sock, I365_ADDRWIN) & I365_ENA_MEM(map)) |
| indirect_resetbit(sock, I365_ADDRWIN, I365_ENA_MEM(map)); |
| |
| |
| /* printk("set_mem_map: Setting map %i range to %x - %x on socket %i, speed is %i, active = %i \n",map, region.start,region.end,sock,mem->speed,mem->flags & MAP_ACTIVE); */ |
| |
| /* write the start address */ |
| base = I365_MEM(map); |
| i = (region.start >> 12) & 0x0fff; |
| if (mem->flags & MAP_16BIT) |
| i |= I365_MEM_16BIT; |
| if (mem->flags & MAP_0WS) |
| i |= I365_MEM_0WS; |
| indirect_write16(sock,base+I365_W_START,i); |
| |
| /* write the stop address */ |
| |
| i= (region.end >> 12) & 0x0fff; |
| switch (to_cycles(mem->speed)) { |
| case 0: |
| break; |
| case 1: |
| i |= I365_MEM_WS0; |
| break; |
| case 2: |
| i |= I365_MEM_WS1; |
| break; |
| default: |
| i |= I365_MEM_WS1 | I365_MEM_WS0; |
| break; |
| } |
| |
| indirect_write16(sock,base+I365_W_STOP,i); |
| |
| /* card start */ |
| |
| i = ((mem->card_start - region.start) >> 12) & 0x3fff; |
| if (mem->flags & MAP_WRPROT) |
| i |= I365_MEM_WRPROT; |
| if (mem->flags & MAP_ATTRIB) { |
| /* printk("requesting attribute memory for socket %i\n",sock);*/ |
| i |= I365_MEM_REG; |
| } else { |
| /* printk("requesting normal memory for socket %i\n",sock);*/ |
| } |
| indirect_write16(sock,base+I365_W_OFF,i); |
| |
| /* Enable the window if necessary */ |
| if (mem->flags & MAP_ACTIVE) |
| indirect_setbit(sock, I365_ADDRWIN, I365_ENA_MEM(map)); |
| |
| leave("i82092aa_set_mem_map"); |
| return 0; |
| } |
| |
| static int i82092aa_module_init(void) |
| { |
| return pci_register_driver(&i82092aa_pci_driver); |
| } |
| |
| static void i82092aa_module_exit(void) |
| { |
| enter("i82092aa_module_exit"); |
| pci_unregister_driver(&i82092aa_pci_driver); |
| if (sockets[0].io_base>0) |
| release_region(sockets[0].io_base, 2); |
| leave("i82092aa_module_exit"); |
| } |
| |
| module_init(i82092aa_module_init); |
| module_exit(i82092aa_module_exit); |
| |