| /* pcnet32.c: An AMD PCnet32 ethernet driver for linux. */ |
| /* |
| * Copyright 1996-1999 Thomas Bogendoerfer |
| * |
| * Derived from the lance driver written 1993,1994,1995 by Donald Becker. |
| * |
| * Copyright 1993 United States Government as represented by the |
| * Director, National Security Agency. |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License, incorporated herein by reference. |
| * |
| * This driver is for PCnet32 and PCnetPCI based ethercards |
| */ |
| /************************************************************************** |
| * 23 Oct, 2000. |
| * Fixed a few bugs, related to running the controller in 32bit mode. |
| * |
| * Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. |
| * |
| *************************************************************************/ |
| |
| #define DRV_NAME "pcnet32" |
| #define DRV_VERSION "1.31c" |
| #define DRV_RELDATE "01.Nov.2005" |
| #define PFX DRV_NAME ": " |
| |
| static const char * const version = |
| DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " tsbogend@alpha.franken.de\n"; |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/crc32.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/moduleparam.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/dma.h> |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| #include <asm/irq.h> |
| |
| /* |
| * PCI device identifiers for "new style" Linux PCI Device Drivers |
| */ |
| static struct pci_device_id pcnet32_pci_tbl[] = { |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| /* |
| * Adapters that were sold with IBM's RS/6000 or pSeries hardware have |
| * the incorrect vendor id. |
| */ |
| { PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE, PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, 0 }, |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE (pci, pcnet32_pci_tbl); |
| |
| static int cards_found; |
| |
| /* |
| * VLB I/O addresses |
| */ |
| static unsigned int pcnet32_portlist[] __initdata = |
| { 0x300, 0x320, 0x340, 0x360, 0 }; |
| |
| |
| |
| static int pcnet32_debug = 0; |
| static int tx_start = 1; /* Mapping -- 0:20, 1:64, 2:128, 3:~220 (depends on chip vers) */ |
| static int pcnet32vlb; /* check for VLB cards ? */ |
| |
| static struct net_device *pcnet32_dev; |
| |
| static int max_interrupt_work = 2; |
| static int rx_copybreak = 200; |
| |
| #define PCNET32_PORT_AUI 0x00 |
| #define PCNET32_PORT_10BT 0x01 |
| #define PCNET32_PORT_GPSI 0x02 |
| #define PCNET32_PORT_MII 0x03 |
| |
| #define PCNET32_PORT_PORTSEL 0x03 |
| #define PCNET32_PORT_ASEL 0x04 |
| #define PCNET32_PORT_100 0x40 |
| #define PCNET32_PORT_FD 0x80 |
| |
| #define PCNET32_DMA_MASK 0xffffffff |
| |
| #define PCNET32_WATCHDOG_TIMEOUT (jiffies + (2 * HZ)) |
| #define PCNET32_BLINK_TIMEOUT (jiffies + (HZ/4)) |
| |
| /* |
| * table to translate option values from tulip |
| * to internal options |
| */ |
| static const unsigned char options_mapping[] = { |
| PCNET32_PORT_ASEL, /* 0 Auto-select */ |
| PCNET32_PORT_AUI, /* 1 BNC/AUI */ |
| PCNET32_PORT_AUI, /* 2 AUI/BNC */ |
| PCNET32_PORT_ASEL, /* 3 not supported */ |
| PCNET32_PORT_10BT | PCNET32_PORT_FD, /* 4 10baseT-FD */ |
| PCNET32_PORT_ASEL, /* 5 not supported */ |
| PCNET32_PORT_ASEL, /* 6 not supported */ |
| PCNET32_PORT_ASEL, /* 7 not supported */ |
| PCNET32_PORT_ASEL, /* 8 not supported */ |
| PCNET32_PORT_MII, /* 9 MII 10baseT */ |
| PCNET32_PORT_MII | PCNET32_PORT_FD, /* 10 MII 10baseT-FD */ |
| PCNET32_PORT_MII, /* 11 MII (autosel) */ |
| PCNET32_PORT_10BT, /* 12 10BaseT */ |
| PCNET32_PORT_MII | PCNET32_PORT_100, /* 13 MII 100BaseTx */ |
| PCNET32_PORT_MII | PCNET32_PORT_100 | PCNET32_PORT_FD, /* 14 MII 100BaseTx-FD */ |
| PCNET32_PORT_ASEL /* 15 not supported */ |
| }; |
| |
| static const char pcnet32_gstrings_test[][ETH_GSTRING_LEN] = { |
| "Loopback test (offline)" |
| }; |
| #define PCNET32_TEST_LEN (sizeof(pcnet32_gstrings_test) / ETH_GSTRING_LEN) |
| |
| #define PCNET32_NUM_REGS 168 |
| |
| #define MAX_UNITS 8 /* More are supported, limit only on options */ |
| static int options[MAX_UNITS]; |
| static int full_duplex[MAX_UNITS]; |
| static int homepna[MAX_UNITS]; |
| |
| /* |
| * Theory of Operation |
| * |
| * This driver uses the same software structure as the normal lance |
| * driver. So look for a verbose description in lance.c. The differences |
| * to the normal lance driver is the use of the 32bit mode of PCnet32 |
| * and PCnetPCI chips. Because these chips are 32bit chips, there is no |
| * 16MB limitation and we don't need bounce buffers. |
| */ |
| |
| /* |
| * History: |
| * v0.01: Initial version |
| * only tested on Alpha Noname Board |
| * v0.02: changed IRQ handling for new interrupt scheme (dev_id) |
| * tested on a ASUS SP3G |
| * v0.10: fixed an odd problem with the 79C974 in a Compaq Deskpro XL |
| * looks like the 974 doesn't like stopping and restarting in a |
| * short period of time; now we do a reinit of the lance; the |
| * bug was triggered by doing ifconfig eth0 <ip> broadcast <addr> |
| * and hangs the machine (thanks to Klaus Liedl for debugging) |
| * v0.12: by suggestion from Donald Becker: Renamed driver to pcnet32, |
| * made it standalone (no need for lance.c) |
| * v0.13: added additional PCI detecting for special PCI devices (Compaq) |
| * v0.14: stripped down additional PCI probe (thanks to David C Niemi |
| * and sveneric@xs4all.nl for testing this on their Compaq boxes) |
| * v0.15: added 79C965 (VLB) probe |
| * added interrupt sharing for PCI chips |
| * v0.16: fixed set_multicast_list on Alpha machines |
| * v0.17: removed hack from dev.c; now pcnet32 uses ethif_probe in Space.c |
| * v0.19: changed setting of autoselect bit |
| * v0.20: removed additional Compaq PCI probe; there is now a working one |
| * in arch/i386/bios32.c |
| * v0.21: added endian conversion for ppc, from work by cort@cs.nmt.edu |
| * v0.22: added printing of status to ring dump |
| * v0.23: changed enet_statistics to net_devive_stats |
| * v0.90: added multicast filter |
| * added module support |
| * changed irq probe to new style |
| * added PCnetFast chip id |
| * added fix for receive stalls with Intel saturn chipsets |
| * added in-place rx skbs like in the tulip driver |
| * minor cleanups |
| * v0.91: added PCnetFast+ chip id |
| * back port to 2.0.x |
| * v1.00: added some stuff from Donald Becker's 2.0.34 version |
| * added support for byte counters in net_dev_stats |
| * v1.01: do ring dumps, only when debugging the driver |
| * increased the transmit timeout |
| * v1.02: fixed memory leak in pcnet32_init_ring() |
| * v1.10: workaround for stopped transmitter |
| * added port selection for modules |
| * detect special T1/E1 WAN card and setup port selection |
| * v1.11: fixed wrong checking of Tx errors |
| * v1.20: added check of return value kmalloc (cpeterso@cs.washington.edu) |
| * added save original kmalloc addr for freeing (mcr@solidum.com) |
| * added support for PCnetHome chip (joe@MIT.EDU) |
| * rewritten PCI card detection |
| * added dwio mode to get driver working on some PPC machines |
| * v1.21: added mii selection and mii ioctl |
| * v1.22: changed pci scanning code to make PPC people happy |
| * fixed switching to 32bit mode in pcnet32_open() (thanks |
| * to Michael Richard <mcr@solidum.com> for noticing this one) |
| * added sub vendor/device id matching (thanks again to |
| * Michael Richard <mcr@solidum.com>) |
| * added chip id for 79c973/975 (thanks to Zach Brown <zab@zabbo.net>) |
| * v1.23 fixed small bug, when manual selecting MII speed/duplex |
| * v1.24 Applied Thomas' patch to use TxStartPoint and thus decrease TxFIFO |
| * underflows. Added tx_start_pt module parameter. Increased |
| * TX_RING_SIZE from 16 to 32. Added #ifdef'd code to use DXSUFLO |
| * for FAST[+] chipsets. <kaf@fc.hp.com> |
| * v1.24ac Added SMP spinlocking - Alan Cox <alan@redhat.com> |
| * v1.25kf Added No Interrupt on successful Tx for some Tx's <kaf@fc.hp.com> |
| * v1.26 Converted to pci_alloc_consistent, Jamey Hicks / George France |
| * <jamey@crl.dec.com> |
| * - Fixed a few bugs, related to running the controller in 32bit mode. |
| * 23 Oct, 2000. Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. |
| * v1.26p Fix oops on rmmod+insmod; plug i/o resource leak - Paul Gortmaker |
| * v1.27 improved CSR/PROM address detection, lots of cleanups, |
| * new pcnet32vlb module option, HP-PARISC support, |
| * added module parameter descriptions, |
| * initial ethtool support - Helge Deller <deller@gmx.de> |
| * v1.27a Sun Feb 10 2002 Go Taniguchi <go@turbolinux.co.jp> |
| * use alloc_etherdev and register_netdev |
| * fix pci probe not increment cards_found |
| * FD auto negotiate error workaround for xSeries250 |
| * clean up and using new mii module |
| * v1.27b Sep 30 2002 Kent Yoder <yoder1@us.ibm.com> |
| * Added timer for cable connection state changes. |
| * v1.28 20 Feb 2004 Don Fry <brazilnut@us.ibm.com> |
| * Jon Mason <jonmason@us.ibm.com>, Chinmay Albal <albal@in.ibm.com> |
| * Now uses ethtool_ops, netif_msg_* and generic_mii_ioctl. |
| * Fixes bogus 'Bus master arbitration failure', pci_[un]map_single |
| * length errors, and transmit hangs. Cleans up after errors in open. |
| * Jim Lewis <jklewis@us.ibm.com> added ethernet loopback test. |
| * Thomas Munck Steenholdt <tmus@tmus.dk> non-mii ioctl corrections. |
| * v1.29 6 Apr 2004 Jim Lewis <jklewis@us.ibm.com> added physical |
| * identification code (blink led's) and register dump. |
| * Don Fry added timer for 971/972 so skbufs don't remain on tx ring |
| * forever. |
| * v1.30 18 May 2004 Don Fry removed timer and Last Transmit Interrupt |
| * (ltint) as they added complexity and didn't give good throughput. |
| * v1.30a 22 May 2004 Don Fry limit frames received during interrupt. |
| * v1.30b 24 May 2004 Don Fry fix bogus tx carrier errors with 79c973, |
| * assisted by Bruce Penrod <bmpenrod@endruntechnologies.com>. |
| * v1.30c 25 May 2004 Don Fry added netif_wake_queue after pcnet32_restart. |
| * v1.30d 01 Jun 2004 Don Fry discard oversize rx packets. |
| * v1.30e 11 Jun 2004 Don Fry recover after fifo error and rx hang. |
| * v1.30f 16 Jun 2004 Don Fry cleanup IRQ to allow 0 and 1 for PCI, |
| * expanding on suggestions from Ralf Baechle <ralf@linux-mips.org>, |
| * and Brian Murphy <brian@murphy.dk>. |
| * v1.30g 22 Jun 2004 Patrick Simmons <psimmons@flash.net> added option |
| * homepna for selecting HomePNA mode for PCNet/Home 79C978. |
| * v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32. |
| * v1.30i 28 Jun 2004 Don Fry change to use module_param. |
| * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test. |
| * v1.31 02 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> added set_ringparam(). |
| * v1.31a 12 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> set min ring size to 4 |
| * to allow loopback test to work unchanged. |
| * v1.31b 06 Oct 2005 Don Fry changed alloc_ring to show name of device |
| * if allocation fails |
| * v1.31c 01 Nov 2005 Don Fry Allied Telesyn 2700/2701 FX are 100Mbit only. |
| * Force 100Mbit FD if Auto (ASEL) is selected. |
| * See Bugzilla 2669 and 4551. |
| */ |
| |
| |
| /* |
| * Set the number of Tx and Rx buffers, using Log_2(# buffers). |
| * Reasonable default values are 4 Tx buffers, and 16 Rx buffers. |
| * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4). |
| */ |
| #ifndef PCNET32_LOG_TX_BUFFERS |
| #define PCNET32_LOG_TX_BUFFERS 4 |
| #define PCNET32_LOG_RX_BUFFERS 5 |
| #define PCNET32_LOG_MAX_TX_BUFFERS 9 /* 2^9 == 512 */ |
| #define PCNET32_LOG_MAX_RX_BUFFERS 9 |
| #endif |
| |
| #define TX_RING_SIZE (1 << (PCNET32_LOG_TX_BUFFERS)) |
| #define TX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_TX_BUFFERS)) |
| |
| #define RX_RING_SIZE (1 << (PCNET32_LOG_RX_BUFFERS)) |
| #define RX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_RX_BUFFERS)) |
| |
| #define PKT_BUF_SZ 1544 |
| |
| /* Offsets from base I/O address. */ |
| #define PCNET32_WIO_RDP 0x10 |
| #define PCNET32_WIO_RAP 0x12 |
| #define PCNET32_WIO_RESET 0x14 |
| #define PCNET32_WIO_BDP 0x16 |
| |
| #define PCNET32_DWIO_RDP 0x10 |
| #define PCNET32_DWIO_RAP 0x14 |
| #define PCNET32_DWIO_RESET 0x18 |
| #define PCNET32_DWIO_BDP 0x1C |
| |
| #define PCNET32_TOTAL_SIZE 0x20 |
| |
| /* The PCNET32 Rx and Tx ring descriptors. */ |
| struct pcnet32_rx_head { |
| u32 base; |
| s16 buf_length; |
| s16 status; |
| u32 msg_length; |
| u32 reserved; |
| }; |
| |
| struct pcnet32_tx_head { |
| u32 base; |
| s16 length; |
| s16 status; |
| u32 misc; |
| u32 reserved; |
| }; |
| |
| /* The PCNET32 32-Bit initialization block, described in databook. */ |
| struct pcnet32_init_block { |
| u16 mode; |
| u16 tlen_rlen; |
| u8 phys_addr[6]; |
| u16 reserved; |
| u32 filter[2]; |
| /* Receive and transmit ring base, along with extra bits. */ |
| u32 rx_ring; |
| u32 tx_ring; |
| }; |
| |
| /* PCnet32 access functions */ |
| struct pcnet32_access { |
| u16 (*read_csr)(unsigned long, int); |
| void (*write_csr)(unsigned long, int, u16); |
| u16 (*read_bcr)(unsigned long, int); |
| void (*write_bcr)(unsigned long, int, u16); |
| u16 (*read_rap)(unsigned long); |
| void (*write_rap)(unsigned long, u16); |
| void (*reset)(unsigned long); |
| }; |
| |
| /* |
| * The first field of pcnet32_private is read by the ethernet device |
| * so the structure should be allocated using pci_alloc_consistent(). |
| */ |
| struct pcnet32_private { |
| struct pcnet32_init_block init_block; |
| /* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */ |
| struct pcnet32_rx_head *rx_ring; |
| struct pcnet32_tx_head *tx_ring; |
| dma_addr_t dma_addr; /* DMA address of beginning of this |
| object, returned by |
| pci_alloc_consistent */ |
| struct pci_dev *pci_dev; /* Pointer to the associated pci device |
| structure */ |
| const char *name; |
| /* The saved address of a sent-in-place packet/buffer, for skfree(). */ |
| struct sk_buff **tx_skbuff; |
| struct sk_buff **rx_skbuff; |
| dma_addr_t *tx_dma_addr; |
| dma_addr_t *rx_dma_addr; |
| struct pcnet32_access a; |
| spinlock_t lock; /* Guard lock */ |
| unsigned int cur_rx, cur_tx; /* The next free ring entry */ |
| unsigned int rx_ring_size; /* current rx ring size */ |
| unsigned int tx_ring_size; /* current tx ring size */ |
| unsigned int rx_mod_mask; /* rx ring modular mask */ |
| unsigned int tx_mod_mask; /* tx ring modular mask */ |
| unsigned short rx_len_bits; |
| unsigned short tx_len_bits; |
| dma_addr_t rx_ring_dma_addr; |
| dma_addr_t tx_ring_dma_addr; |
| unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ |
| struct net_device_stats stats; |
| char tx_full; |
| int options; |
| unsigned int shared_irq:1, /* shared irq possible */ |
| dxsuflo:1, /* disable transmit stop on uflo */ |
| mii:1; /* mii port available */ |
| struct net_device *next; |
| struct mii_if_info mii_if; |
| struct timer_list watchdog_timer; |
| struct timer_list blink_timer; |
| u32 msg_enable; /* debug message level */ |
| }; |
| |
| static void pcnet32_probe_vlbus(void); |
| static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *); |
| static int pcnet32_probe1(unsigned long, int, struct pci_dev *); |
| static int pcnet32_open(struct net_device *); |
| static int pcnet32_init_ring(struct net_device *); |
| static int pcnet32_start_xmit(struct sk_buff *, struct net_device *); |
| static int pcnet32_rx(struct net_device *); |
| static void pcnet32_tx_timeout (struct net_device *dev); |
| static irqreturn_t pcnet32_interrupt(int, void *, struct pt_regs *); |
| static int pcnet32_close(struct net_device *); |
| static struct net_device_stats *pcnet32_get_stats(struct net_device *); |
| static void pcnet32_load_multicast(struct net_device *dev); |
| static void pcnet32_set_multicast_list(struct net_device *); |
| static int pcnet32_ioctl(struct net_device *, struct ifreq *, int); |
| static void pcnet32_watchdog(struct net_device *); |
| static int mdio_read(struct net_device *dev, int phy_id, int reg_num); |
| static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val); |
| static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits); |
| static void pcnet32_ethtool_test(struct net_device *dev, |
| struct ethtool_test *eth_test, u64 *data); |
| static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1); |
| static int pcnet32_phys_id(struct net_device *dev, u32 data); |
| static void pcnet32_led_blink_callback(struct net_device *dev); |
| static int pcnet32_get_regs_len(struct net_device *dev); |
| static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, |
| void *ptr); |
| static void pcnet32_purge_tx_ring(struct net_device *dev); |
| static int pcnet32_alloc_ring(struct net_device *dev, char *name); |
| static void pcnet32_free_ring(struct net_device *dev); |
| |
| |
| enum pci_flags_bit { |
| PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, |
| PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3, |
| }; |
| |
| |
| static u16 pcnet32_wio_read_csr (unsigned long addr, int index) |
| { |
| outw (index, addr+PCNET32_WIO_RAP); |
| return inw (addr+PCNET32_WIO_RDP); |
| } |
| |
| static void pcnet32_wio_write_csr (unsigned long addr, int index, u16 val) |
| { |
| outw (index, addr+PCNET32_WIO_RAP); |
| outw (val, addr+PCNET32_WIO_RDP); |
| } |
| |
| static u16 pcnet32_wio_read_bcr (unsigned long addr, int index) |
| { |
| outw (index, addr+PCNET32_WIO_RAP); |
| return inw (addr+PCNET32_WIO_BDP); |
| } |
| |
| static void pcnet32_wio_write_bcr (unsigned long addr, int index, u16 val) |
| { |
| outw (index, addr+PCNET32_WIO_RAP); |
| outw (val, addr+PCNET32_WIO_BDP); |
| } |
| |
| static u16 pcnet32_wio_read_rap (unsigned long addr) |
| { |
| return inw (addr+PCNET32_WIO_RAP); |
| } |
| |
| static void pcnet32_wio_write_rap (unsigned long addr, u16 val) |
| { |
| outw (val, addr+PCNET32_WIO_RAP); |
| } |
| |
| static void pcnet32_wio_reset (unsigned long addr) |
| { |
| inw (addr+PCNET32_WIO_RESET); |
| } |
| |
| static int pcnet32_wio_check (unsigned long addr) |
| { |
| outw (88, addr+PCNET32_WIO_RAP); |
| return (inw (addr+PCNET32_WIO_RAP) == 88); |
| } |
| |
| static struct pcnet32_access pcnet32_wio = { |
| .read_csr = pcnet32_wio_read_csr, |
| .write_csr = pcnet32_wio_write_csr, |
| .read_bcr = pcnet32_wio_read_bcr, |
| .write_bcr = pcnet32_wio_write_bcr, |
| .read_rap = pcnet32_wio_read_rap, |
| .write_rap = pcnet32_wio_write_rap, |
| .reset = pcnet32_wio_reset |
| }; |
| |
| static u16 pcnet32_dwio_read_csr (unsigned long addr, int index) |
| { |
| outl (index, addr+PCNET32_DWIO_RAP); |
| return (inl (addr+PCNET32_DWIO_RDP) & 0xffff); |
| } |
| |
| static void pcnet32_dwio_write_csr (unsigned long addr, int index, u16 val) |
| { |
| outl (index, addr+PCNET32_DWIO_RAP); |
| outl (val, addr+PCNET32_DWIO_RDP); |
| } |
| |
| static u16 pcnet32_dwio_read_bcr (unsigned long addr, int index) |
| { |
| outl (index, addr+PCNET32_DWIO_RAP); |
| return (inl (addr+PCNET32_DWIO_BDP) & 0xffff); |
| } |
| |
| static void pcnet32_dwio_write_bcr (unsigned long addr, int index, u16 val) |
| { |
| outl (index, addr+PCNET32_DWIO_RAP); |
| outl (val, addr+PCNET32_DWIO_BDP); |
| } |
| |
| static u16 pcnet32_dwio_read_rap (unsigned long addr) |
| { |
| return (inl (addr+PCNET32_DWIO_RAP) & 0xffff); |
| } |
| |
| static void pcnet32_dwio_write_rap (unsigned long addr, u16 val) |
| { |
| outl (val, addr+PCNET32_DWIO_RAP); |
| } |
| |
| static void pcnet32_dwio_reset (unsigned long addr) |
| { |
| inl (addr+PCNET32_DWIO_RESET); |
| } |
| |
| static int pcnet32_dwio_check (unsigned long addr) |
| { |
| outl (88, addr+PCNET32_DWIO_RAP); |
| return ((inl (addr+PCNET32_DWIO_RAP) & 0xffff) == 88); |
| } |
| |
| static struct pcnet32_access pcnet32_dwio = { |
| .read_csr = pcnet32_dwio_read_csr, |
| .write_csr = pcnet32_dwio_write_csr, |
| .read_bcr = pcnet32_dwio_read_bcr, |
| .write_bcr = pcnet32_dwio_write_bcr, |
| .read_rap = pcnet32_dwio_read_rap, |
| .write_rap = pcnet32_dwio_write_rap, |
| .reset = pcnet32_dwio_reset |
| }; |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void pcnet32_poll_controller(struct net_device *dev) |
| { |
| disable_irq(dev->irq); |
| pcnet32_interrupt(0, dev, NULL); |
| enable_irq(dev->irq); |
| } |
| #endif |
| |
| |
| static int pcnet32_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long flags; |
| int r = -EOPNOTSUPP; |
| |
| if (lp->mii) { |
| spin_lock_irqsave(&lp->lock, flags); |
| mii_ethtool_gset(&lp->mii_if, cmd); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| r = 0; |
| } |
| return r; |
| } |
| |
| static int pcnet32_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long flags; |
| int r = -EOPNOTSUPP; |
| |
| if (lp->mii) { |
| spin_lock_irqsave(&lp->lock, flags); |
| r = mii_ethtool_sset(&lp->mii_if, cmd); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| return r; |
| } |
| |
| static void pcnet32_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| |
| strcpy (info->driver, DRV_NAME); |
| strcpy (info->version, DRV_VERSION); |
| if (lp->pci_dev) |
| strcpy (info->bus_info, pci_name(lp->pci_dev)); |
| else |
| sprintf(info->bus_info, "VLB 0x%lx", dev->base_addr); |
| } |
| |
| static u32 pcnet32_get_link(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long flags; |
| int r; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| if (lp->mii) { |
| r = mii_link_ok(&lp->mii_if); |
| } else { |
| ulong ioaddr = dev->base_addr; /* card base I/O address */ |
| r = (lp->a.read_bcr(ioaddr, 4) != 0xc0); |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return r; |
| } |
| |
| static u32 pcnet32_get_msglevel(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| return lp->msg_enable; |
| } |
| |
| static void pcnet32_set_msglevel(struct net_device *dev, u32 value) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| lp->msg_enable = value; |
| } |
| |
| static int pcnet32_nway_reset(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long flags; |
| int r = -EOPNOTSUPP; |
| |
| if (lp->mii) { |
| spin_lock_irqsave(&lp->lock, flags); |
| r = mii_nway_restart(&lp->mii_if); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| return r; |
| } |
| |
| static void pcnet32_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| |
| ering->tx_max_pending = TX_MAX_RING_SIZE - 1; |
| ering->tx_pending = lp->tx_ring_size - 1; |
| ering->rx_max_pending = RX_MAX_RING_SIZE - 1; |
| ering->rx_pending = lp->rx_ring_size - 1; |
| } |
| |
| static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long flags; |
| int i; |
| |
| if (ering->rx_mini_pending || ering->rx_jumbo_pending) |
| return -EINVAL; |
| |
| if (netif_running(dev)) |
| pcnet32_close(dev); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| pcnet32_free_ring(dev); |
| lp->tx_ring_size = min(ering->tx_pending, (unsigned int) TX_MAX_RING_SIZE); |
| lp->rx_ring_size = min(ering->rx_pending, (unsigned int) RX_MAX_RING_SIZE); |
| |
| /* set the minimum ring size to 4, to allow the loopback test to work |
| * unchanged. |
| */ |
| for (i = 2; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { |
| if (lp->tx_ring_size <= (1 << i)) |
| break; |
| } |
| lp->tx_ring_size = (1 << i); |
| lp->tx_mod_mask = lp->tx_ring_size - 1; |
| lp->tx_len_bits = (i << 12); |
| |
| for (i = 2; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { |
| if (lp->rx_ring_size <= (1 << i)) |
| break; |
| } |
| lp->rx_ring_size = (1 << i); |
| lp->rx_mod_mask = lp->rx_ring_size - 1; |
| lp->rx_len_bits = (i << 4); |
| |
| if (pcnet32_alloc_ring(dev, dev->name)) { |
| pcnet32_free_ring(dev); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return -ENOMEM; |
| } |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk(KERN_INFO PFX "%s: Ring Param Settings: RX: %d, TX: %d\n", |
| dev->name, lp->rx_ring_size, lp->tx_ring_size); |
| |
| if (netif_running(dev)) |
| pcnet32_open(dev); |
| |
| return 0; |
| } |
| |
| static void pcnet32_get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| { |
| memcpy(data, pcnet32_gstrings_test, sizeof(pcnet32_gstrings_test)); |
| } |
| |
| static int pcnet32_self_test_count(struct net_device *dev) |
| { |
| return PCNET32_TEST_LEN; |
| } |
| |
| static void pcnet32_ethtool_test(struct net_device *dev, |
| struct ethtool_test *test, u64 *data) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| int rc; |
| |
| if (test->flags == ETH_TEST_FL_OFFLINE) { |
| rc = pcnet32_loopback_test(dev, data); |
| if (rc) { |
| if (netif_msg_hw(lp)) |
| printk(KERN_DEBUG "%s: Loopback test failed.\n", dev->name); |
| test->flags |= ETH_TEST_FL_FAILED; |
| } else if (netif_msg_hw(lp)) |
| printk(KERN_DEBUG "%s: Loopback test passed.\n", dev->name); |
| } else if (netif_msg_hw(lp)) |
| printk(KERN_DEBUG "%s: No tests to run (specify 'Offline' on ethtool).", dev->name); |
| } /* end pcnet32_ethtool_test */ |
| |
| static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| struct pcnet32_access *a = &lp->a; /* access to registers */ |
| ulong ioaddr = dev->base_addr; /* card base I/O address */ |
| struct sk_buff *skb; /* sk buff */ |
| int x, i; /* counters */ |
| int numbuffs = 4; /* number of TX/RX buffers and descs */ |
| u16 status = 0x8300; /* TX ring status */ |
| u16 teststatus; /* test of ring status */ |
| int rc; /* return code */ |
| int size; /* size of packets */ |
| unsigned char *packet; /* source packet data */ |
| static const int data_len = 60; /* length of source packets */ |
| unsigned long flags; |
| unsigned long ticks; |
| |
| *data1 = 1; /* status of test, default to fail */ |
| rc = 1; /* default to fail */ |
| |
| if (netif_running(dev)) |
| pcnet32_close(dev); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| /* Reset the PCNET32 */ |
| lp->a.reset (ioaddr); |
| |
| /* switch pcnet32 to 32bit mode */ |
| lp->a.write_bcr (ioaddr, 20, 2); |
| |
| lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); |
| lp->init_block.filter[0] = 0; |
| lp->init_block.filter[1] = 0; |
| |
| /* purge & init rings but don't actually restart */ |
| pcnet32_restart(dev, 0x0000); |
| |
| lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */ |
| |
| /* Initialize Transmit buffers. */ |
| size = data_len + 15; |
| for (x=0; x<numbuffs; x++) { |
| if (!(skb = dev_alloc_skb(size))) { |
| if (netif_msg_hw(lp)) |
| printk(KERN_DEBUG "%s: Cannot allocate skb at line: %d!\n", |
| dev->name, __LINE__); |
| goto clean_up; |
| } else { |
| packet = skb->data; |
| skb_put(skb, size); /* create space for data */ |
| lp->tx_skbuff[x] = skb; |
| lp->tx_ring[x].length = le16_to_cpu(-skb->len); |
| lp->tx_ring[x].misc = 0; |
| |
| /* put DA and SA into the skb */ |
| for (i=0; i<6; i++) |
| *packet++ = dev->dev_addr[i]; |
| for (i=0; i<6; i++) |
| *packet++ = dev->dev_addr[i]; |
| /* type */ |
| *packet++ = 0x08; |
| *packet++ = 0x06; |
| /* packet number */ |
| *packet++ = x; |
| /* fill packet with data */ |
| for (i=0; i<data_len; i++) |
| *packet++ = i; |
| |
| lp->tx_dma_addr[x] = pci_map_single(lp->pci_dev, skb->data, |
| skb->len, PCI_DMA_TODEVICE); |
| lp->tx_ring[x].base = (u32)le32_to_cpu(lp->tx_dma_addr[x]); |
| wmb(); /* Make sure owner changes after all others are visible */ |
| lp->tx_ring[x].status = le16_to_cpu(status); |
| } |
| } |
| |
| x = a->read_bcr(ioaddr, 32); /* set internal loopback in BSR32 */ |
| x = x | 0x0002; |
| a->write_bcr(ioaddr, 32, x); |
| |
| lp->a.write_csr (ioaddr, 15, 0x0044); /* set int loopback in CSR15 */ |
| |
| teststatus = le16_to_cpu(0x8000); |
| lp->a.write_csr(ioaddr, 0, 0x0002); /* Set STRT bit */ |
| |
| /* Check status of descriptors */ |
| for (x=0; x<numbuffs; x++) { |
| ticks = 0; |
| rmb(); |
| while ((lp->rx_ring[x].status & teststatus) && (ticks < 200)) { |
| spin_unlock_irqrestore(&lp->lock, flags); |
| mdelay(1); |
| spin_lock_irqsave(&lp->lock, flags); |
| rmb(); |
| ticks++; |
| } |
| if (ticks == 200) { |
| if (netif_msg_hw(lp)) |
| printk("%s: Desc %d failed to reset!\n",dev->name,x); |
| break; |
| } |
| } |
| |
| lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */ |
| wmb(); |
| if (netif_msg_hw(lp) && netif_msg_pktdata(lp)) { |
| printk(KERN_DEBUG "%s: RX loopback packets:\n", dev->name); |
| |
| for (x=0; x<numbuffs; x++) { |
| printk(KERN_DEBUG "%s: Packet %d:\n", dev->name, x); |
| skb = lp->rx_skbuff[x]; |
| for (i=0; i<size; i++) { |
| printk("%02x ", *(skb->data+i)); |
| } |
| printk("\n"); |
| } |
| } |
| |
| x = 0; |
| rc = 0; |
| while (x<numbuffs && !rc) { |
| skb = lp->rx_skbuff[x]; |
| packet = lp->tx_skbuff[x]->data; |
| for (i=0; i<size; i++) { |
| if (*(skb->data+i) != packet[i]) { |
| if (netif_msg_hw(lp)) |
| printk(KERN_DEBUG "%s: Error in compare! %2x - %02x %02x\n", |
| dev->name, i, *(skb->data+i), packet[i]); |
| rc = 1; |
| break; |
| } |
| } |
| x++; |
| } |
| if (!rc) { |
| *data1 = 0; |
| } |
| |
| clean_up: |
| pcnet32_purge_tx_ring(dev); |
| x = a->read_csr(ioaddr, 15) & 0xFFFF; |
| a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */ |
| |
| x = a->read_bcr(ioaddr, 32); /* reset internal loopback */ |
| x = x & ~0x0002; |
| a->write_bcr(ioaddr, 32, x); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| if (netif_running(dev)) { |
| pcnet32_open(dev); |
| } else { |
| lp->a.write_bcr (ioaddr, 20, 4); /* return to 16bit mode */ |
| } |
| |
| return(rc); |
| } /* end pcnet32_loopback_test */ |
| |
| static void pcnet32_led_blink_callback(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| struct pcnet32_access *a = &lp->a; |
| ulong ioaddr = dev->base_addr; |
| unsigned long flags; |
| int i; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| for (i=4; i<8; i++) { |
| a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000); |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| mod_timer(&lp->blink_timer, PCNET32_BLINK_TIMEOUT); |
| } |
| |
| static int pcnet32_phys_id(struct net_device *dev, u32 data) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| struct pcnet32_access *a = &lp->a; |
| ulong ioaddr = dev->base_addr; |
| unsigned long flags; |
| int i, regs[4]; |
| |
| if (!lp->blink_timer.function) { |
| init_timer(&lp->blink_timer); |
| lp->blink_timer.function = (void *) pcnet32_led_blink_callback; |
| lp->blink_timer.data = (unsigned long) dev; |
| } |
| |
| /* Save the current value of the bcrs */ |
| spin_lock_irqsave(&lp->lock, flags); |
| for (i=4; i<8; i++) { |
| regs[i-4] = a->read_bcr(ioaddr, i); |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| mod_timer(&lp->blink_timer, jiffies); |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| if ((!data) || (data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))) |
| data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); |
| |
| msleep_interruptible(data * 1000); |
| del_timer_sync(&lp->blink_timer); |
| |
| /* Restore the original value of the bcrs */ |
| spin_lock_irqsave(&lp->lock, flags); |
| for (i=4; i<8; i++) { |
| a->write_bcr(ioaddr, i, regs[i-4]); |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return 0; |
| } |
| |
| static int pcnet32_get_regs_len(struct net_device *dev) |
| { |
| return(PCNET32_NUM_REGS * sizeof(u16)); |
| } |
| |
| static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, |
| void *ptr) |
| { |
| int i, csr0; |
| u16 *buff = ptr; |
| struct pcnet32_private *lp = dev->priv; |
| struct pcnet32_access *a = &lp->a; |
| ulong ioaddr = dev->base_addr; |
| int ticks; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| csr0 = a->read_csr(ioaddr, 0); |
| if (!(csr0 & 0x0004)) { /* If not stopped */ |
| /* set SUSPEND (SPND) - CSR5 bit 0 */ |
| a->write_csr(ioaddr, 5, 0x0001); |
| |
| /* poll waiting for bit to be set */ |
| ticks = 0; |
| while (!(a->read_csr(ioaddr, 5) & 0x0001)) { |
| spin_unlock_irqrestore(&lp->lock, flags); |
| mdelay(1); |
| spin_lock_irqsave(&lp->lock, flags); |
| ticks++; |
| if (ticks > 200) { |
| if (netif_msg_hw(lp)) |
| printk(KERN_DEBUG "%s: Error getting into suspend!\n", |
| dev->name); |
| break; |
| } |
| } |
| } |
| |
| /* read address PROM */ |
| for (i=0; i<16; i += 2) |
| *buff++ = inw(ioaddr + i); |
| |
| /* read control and status registers */ |
| for (i=0; i<90; i++) { |
| *buff++ = a->read_csr(ioaddr, i); |
| } |
| |
| *buff++ = a->read_csr(ioaddr, 112); |
| *buff++ = a->read_csr(ioaddr, 114); |
| |
| /* read bus configuration registers */ |
| for (i=0; i<30; i++) { |
| *buff++ = a->read_bcr(ioaddr, i); |
| } |
| *buff++ = 0; /* skip bcr30 so as not to hang 79C976 */ |
| for (i=31; i<36; i++) { |
| *buff++ = a->read_bcr(ioaddr, i); |
| } |
| |
| /* read mii phy registers */ |
| if (lp->mii) { |
| for (i=0; i<32; i++) { |
| lp->a.write_bcr(ioaddr, 33, ((lp->mii_if.phy_id) << 5) | i); |
| *buff++ = lp->a.read_bcr(ioaddr, 34); |
| } |
| } |
| |
| if (!(csr0 & 0x0004)) { /* If not stopped */ |
| /* clear SUSPEND (SPND) - CSR5 bit 0 */ |
| a->write_csr(ioaddr, 5, 0x0000); |
| } |
| |
| i = buff - (u16 *)ptr; |
| for (; i < PCNET32_NUM_REGS; i++) |
| *buff++ = 0; |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| static struct ethtool_ops pcnet32_ethtool_ops = { |
| .get_settings = pcnet32_get_settings, |
| .set_settings = pcnet32_set_settings, |
| .get_drvinfo = pcnet32_get_drvinfo, |
| .get_msglevel = pcnet32_get_msglevel, |
| .set_msglevel = pcnet32_set_msglevel, |
| .nway_reset = pcnet32_nway_reset, |
| .get_link = pcnet32_get_link, |
| .get_ringparam = pcnet32_get_ringparam, |
| .set_ringparam = pcnet32_set_ringparam, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .get_sg = ethtool_op_get_sg, |
| .get_tso = ethtool_op_get_tso, |
| .get_strings = pcnet32_get_strings, |
| .self_test_count = pcnet32_self_test_count, |
| .self_test = pcnet32_ethtool_test, |
| .phys_id = pcnet32_phys_id, |
| .get_regs_len = pcnet32_get_regs_len, |
| .get_regs = pcnet32_get_regs, |
| .get_perm_addr = ethtool_op_get_perm_addr, |
| }; |
| |
| /* only probes for non-PCI devices, the rest are handled by |
| * pci_register_driver via pcnet32_probe_pci */ |
| |
| static void __devinit |
| pcnet32_probe_vlbus(void) |
| { |
| unsigned int *port, ioaddr; |
| |
| /* search for PCnet32 VLB cards at known addresses */ |
| for (port = pcnet32_portlist; (ioaddr = *port); port++) { |
| if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_vlbus")) { |
| /* check if there is really a pcnet chip on that ioaddr */ |
| if ((inb(ioaddr + 14) == 0x57) && (inb(ioaddr + 15) == 0x57)) { |
| pcnet32_probe1(ioaddr, 0, NULL); |
| } else { |
| release_region(ioaddr, PCNET32_TOTAL_SIZE); |
| } |
| } |
| } |
| } |
| |
| |
| static int __devinit |
| pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| unsigned long ioaddr; |
| int err; |
| |
| err = pci_enable_device(pdev); |
| if (err < 0) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_ERR PFX "failed to enable device -- err=%d\n", err); |
| return err; |
| } |
| pci_set_master(pdev); |
| |
| ioaddr = pci_resource_start (pdev, 0); |
| if (!ioaddr) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk (KERN_ERR PFX "card has no PCI IO resources, aborting\n"); |
| return -ENODEV; |
| } |
| |
| if (!pci_dma_supported(pdev, PCNET32_DMA_MASK)) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_ERR PFX "architecture does not support 32bit PCI busmaster DMA\n"); |
| return -ENODEV; |
| } |
| if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci") == NULL) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_ERR PFX "io address range already allocated\n"); |
| return -EBUSY; |
| } |
| |
| err = pcnet32_probe1(ioaddr, 1, pdev); |
| if (err < 0) { |
| pci_disable_device(pdev); |
| } |
| return err; |
| } |
| |
| |
| /* pcnet32_probe1 |
| * Called from both pcnet32_probe_vlbus and pcnet_probe_pci. |
| * pdev will be NULL when called from pcnet32_probe_vlbus. |
| */ |
| static int __devinit |
| pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) |
| { |
| struct pcnet32_private *lp; |
| dma_addr_t lp_dma_addr; |
| int i, media; |
| int fdx, mii, fset, dxsuflo; |
| int chip_version; |
| char *chipname; |
| struct net_device *dev; |
| struct pcnet32_access *a = NULL; |
| u8 promaddr[6]; |
| int ret = -ENODEV; |
| |
| /* reset the chip */ |
| pcnet32_wio_reset(ioaddr); |
| |
| /* NOTE: 16-bit check is first, otherwise some older PCnet chips fail */ |
| if (pcnet32_wio_read_csr(ioaddr, 0) == 4 && pcnet32_wio_check(ioaddr)) { |
| a = &pcnet32_wio; |
| } else { |
| pcnet32_dwio_reset(ioaddr); |
| if (pcnet32_dwio_read_csr(ioaddr, 0) == 4 && pcnet32_dwio_check(ioaddr)) { |
| a = &pcnet32_dwio; |
| } else |
| goto err_release_region; |
| } |
| |
| chip_version = a->read_csr(ioaddr, 88) | (a->read_csr(ioaddr,89) << 16); |
| if ((pcnet32_debug & NETIF_MSG_PROBE) && (pcnet32_debug & NETIF_MSG_HW)) |
| printk(KERN_INFO " PCnet chip version is %#x.\n", chip_version); |
| if ((chip_version & 0xfff) != 0x003) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_INFO PFX "Unsupported chip version.\n"); |
| goto err_release_region; |
| } |
| |
| /* initialize variables */ |
| fdx = mii = fset = dxsuflo = 0; |
| chip_version = (chip_version >> 12) & 0xffff; |
| |
| switch (chip_version) { |
| case 0x2420: |
| chipname = "PCnet/PCI 79C970"; /* PCI */ |
| break; |
| case 0x2430: |
| if (shared) |
| chipname = "PCnet/PCI 79C970"; /* 970 gives the wrong chip id back */ |
| else |
| chipname = "PCnet/32 79C965"; /* 486/VL bus */ |
| break; |
| case 0x2621: |
| chipname = "PCnet/PCI II 79C970A"; /* PCI */ |
| fdx = 1; |
| break; |
| case 0x2623: |
| chipname = "PCnet/FAST 79C971"; /* PCI */ |
| fdx = 1; mii = 1; fset = 1; |
| break; |
| case 0x2624: |
| chipname = "PCnet/FAST+ 79C972"; /* PCI */ |
| fdx = 1; mii = 1; fset = 1; |
| break; |
| case 0x2625: |
| chipname = "PCnet/FAST III 79C973"; /* PCI */ |
| fdx = 1; mii = 1; |
| break; |
| case 0x2626: |
| chipname = "PCnet/Home 79C978"; /* PCI */ |
| fdx = 1; |
| /* |
| * This is based on specs published at www.amd.com. This section |
| * assumes that a card with a 79C978 wants to go into standard |
| * ethernet mode. The 79C978 can also go into 1Mb HomePNA mode, |
| * and the module option homepna=1 can select this instead. |
| */ |
| media = a->read_bcr(ioaddr, 49); |
| media &= ~3; /* default to 10Mb ethernet */ |
| if (cards_found < MAX_UNITS && homepna[cards_found]) |
| media |= 1; /* switch to home wiring mode */ |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_DEBUG PFX "media set to %sMbit mode.\n", |
| (media & 1) ? "1" : "10"); |
| a->write_bcr(ioaddr, 49, media); |
| break; |
| case 0x2627: |
| chipname = "PCnet/FAST III 79C975"; /* PCI */ |
| fdx = 1; mii = 1; |
| break; |
| case 0x2628: |
| chipname = "PCnet/PRO 79C976"; |
| fdx = 1; mii = 1; |
| break; |
| default: |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_INFO PFX "PCnet version %#x, no PCnet32 chip.\n", |
| chip_version); |
| goto err_release_region; |
| } |
| |
| /* |
| * On selected chips turn on the BCR18:NOUFLO bit. This stops transmit |
| * starting until the packet is loaded. Strike one for reliability, lose |
| * one for latency - although on PCI this isnt a big loss. Older chips |
| * have FIFO's smaller than a packet, so you can't do this. |
| * Turn on BCR18:BurstRdEn and BCR18:BurstWrEn. |
| */ |
| |
| if (fset) { |
| a->write_bcr(ioaddr, 18, (a->read_bcr(ioaddr, 18) | 0x0860)); |
| a->write_csr(ioaddr, 80, (a->read_csr(ioaddr, 80) & 0x0C00) | 0x0c00); |
| dxsuflo = 1; |
| } |
| |
| dev = alloc_etherdev(0); |
| if (!dev) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_ERR PFX "Memory allocation failed.\n"); |
| ret = -ENOMEM; |
| goto err_release_region; |
| } |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr); |
| |
| /* In most chips, after a chip reset, the ethernet address is read from the |
| * station address PROM at the base address and programmed into the |
| * "Physical Address Registers" CSR12-14. |
| * As a precautionary measure, we read the PROM values and complain if |
| * they disagree with the CSRs. Either way, we use the CSR values, and |
| * double check that they are valid. |
| */ |
| for (i = 0; i < 3; i++) { |
| unsigned int val; |
| val = a->read_csr(ioaddr, i+12) & 0x0ffff; |
| /* There may be endianness issues here. */ |
| dev->dev_addr[2*i] = val & 0x0ff; |
| dev->dev_addr[2*i+1] = (val >> 8) & 0x0ff; |
| } |
| |
| /* read PROM address and compare with CSR address */ |
| for (i = 0; i < 6; i++) |
| promaddr[i] = inb(ioaddr + i); |
| |
| if (memcmp(promaddr, dev->dev_addr, 6) |
| || !is_valid_ether_addr(dev->dev_addr)) { |
| if (is_valid_ether_addr(promaddr)) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) { |
| printk(" warning: CSR address invalid,\n"); |
| printk(KERN_INFO " using instead PROM address of"); |
| } |
| memcpy(dev->dev_addr, promaddr, 6); |
| } |
| } |
| memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
| |
| /* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ |
| if (!is_valid_ether_addr(dev->perm_addr)) |
| memset(dev->dev_addr, 0, sizeof(dev->dev_addr)); |
| |
| if (pcnet32_debug & NETIF_MSG_PROBE) { |
| for (i = 0; i < 6; i++) |
| printk(" %2.2x", dev->dev_addr[i]); |
| |
| /* Version 0x2623 and 0x2624 */ |
| if (((chip_version + 1) & 0xfffe) == 0x2624) { |
| i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */ |
| printk("\n" KERN_INFO " tx_start_pt(0x%04x):",i); |
| switch(i>>10) { |
| case 0: printk(" 20 bytes,"); break; |
| case 1: printk(" 64 bytes,"); break; |
| case 2: printk(" 128 bytes,"); break; |
| case 3: printk("~220 bytes,"); break; |
| } |
| i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */ |
| printk(" BCR18(%x):",i&0xffff); |
| if (i & (1<<5)) printk("BurstWrEn "); |
| if (i & (1<<6)) printk("BurstRdEn "); |
| if (i & (1<<7)) printk("DWordIO "); |
| if (i & (1<<11)) printk("NoUFlow "); |
| i = a->read_bcr(ioaddr, 25); |
| printk("\n" KERN_INFO " SRAMSIZE=0x%04x,",i<<8); |
| i = a->read_bcr(ioaddr, 26); |
| printk(" SRAM_BND=0x%04x,",i<<8); |
| i = a->read_bcr(ioaddr, 27); |
| if (i & (1<<14)) printk("LowLatRx"); |
| } |
| } |
| |
| dev->base_addr = ioaddr; |
| /* pci_alloc_consistent returns page-aligned memory, so we do not have to check the alignment */ |
| if ((lp = pci_alloc_consistent(pdev, sizeof(*lp), &lp_dma_addr)) == NULL) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_ERR PFX "Consistent memory allocation failed.\n"); |
| ret = -ENOMEM; |
| goto err_free_netdev; |
| } |
| |
| memset(lp, 0, sizeof(*lp)); |
| lp->dma_addr = lp_dma_addr; |
| lp->pci_dev = pdev; |
| |
| spin_lock_init(&lp->lock); |
| |
| SET_MODULE_OWNER(dev); |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| dev->priv = lp; |
| lp->name = chipname; |
| lp->shared_irq = shared; |
| lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */ |
| lp->rx_ring_size = RX_RING_SIZE; /* default rx ring size */ |
| lp->tx_mod_mask = lp->tx_ring_size - 1; |
| lp->rx_mod_mask = lp->rx_ring_size - 1; |
| lp->tx_len_bits = (PCNET32_LOG_TX_BUFFERS << 12); |
| lp->rx_len_bits = (PCNET32_LOG_RX_BUFFERS << 4); |
| lp->mii_if.full_duplex = fdx; |
| lp->mii_if.phy_id_mask = 0x1f; |
| lp->mii_if.reg_num_mask = 0x1f; |
| lp->dxsuflo = dxsuflo; |
| lp->mii = mii; |
| lp->msg_enable = pcnet32_debug; |
| if ((cards_found >= MAX_UNITS) || (options[cards_found] > sizeof(options_mapping))) |
| lp->options = PCNET32_PORT_ASEL; |
| else |
| lp->options = options_mapping[options[cards_found]]; |
| lp->mii_if.dev = dev; |
| lp->mii_if.mdio_read = mdio_read; |
| lp->mii_if.mdio_write = mdio_write; |
| |
| if (fdx && !(lp->options & PCNET32_PORT_ASEL) && |
| ((cards_found>=MAX_UNITS) || full_duplex[cards_found])) |
| lp->options |= PCNET32_PORT_FD; |
| |
| if (!a) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_ERR PFX "No access methods\n"); |
| ret = -ENODEV; |
| goto err_free_consistent; |
| } |
| lp->a = *a; |
| |
| /* prior to register_netdev, dev->name is not yet correct */ |
| if (pcnet32_alloc_ring(dev, pci_name(lp->pci_dev))) { |
| ret = -ENOMEM; |
| goto err_free_ring; |
| } |
| /* detect special T1/E1 WAN card by checking for MAC address */ |
| if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0 |
| && dev->dev_addr[2] == 0x75) |
| lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI; |
| |
| lp->init_block.mode = le16_to_cpu(0x0003); /* Disable Rx and Tx. */ |
| lp->init_block.tlen_rlen = le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits); |
| for (i = 0; i < 6; i++) |
| lp->init_block.phys_addr[i] = dev->dev_addr[i]; |
| lp->init_block.filter[0] = 0x00000000; |
| lp->init_block.filter[1] = 0x00000000; |
| lp->init_block.rx_ring = (u32)le32_to_cpu(lp->rx_ring_dma_addr); |
| lp->init_block.tx_ring = (u32)le32_to_cpu(lp->tx_ring_dma_addr); |
| |
| /* switch pcnet32 to 32bit mode */ |
| a->write_bcr(ioaddr, 20, 2); |
| |
| a->write_csr(ioaddr, 1, (lp->dma_addr + offsetof(struct pcnet32_private, |
| init_block)) & 0xffff); |
| a->write_csr(ioaddr, 2, (lp->dma_addr + offsetof(struct pcnet32_private, |
| init_block)) >> 16); |
| |
| if (pdev) { /* use the IRQ provided by PCI */ |
| dev->irq = pdev->irq; |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(" assigned IRQ %d.\n", dev->irq); |
| } else { |
| unsigned long irq_mask = probe_irq_on(); |
| |
| /* |
| * To auto-IRQ we enable the initialization-done and DMA error |
| * interrupts. For ISA boards we get a DMA error, but VLB and PCI |
| * boards will work. |
| */ |
| /* Trigger an initialization just for the interrupt. */ |
| a->write_csr (ioaddr, 0, 0x41); |
| mdelay (1); |
| |
| dev->irq = probe_irq_off (irq_mask); |
| if (!dev->irq) { |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(", failed to detect IRQ line.\n"); |
| ret = -ENODEV; |
| goto err_free_ring; |
| } |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(", probed IRQ %d.\n", dev->irq); |
| } |
| |
| /* Set the mii phy_id so that we can query the link state */ |
| if (lp->mii) |
| lp->mii_if.phy_id = ((lp->a.read_bcr (ioaddr, 33)) >> 5) & 0x1f; |
| |
| init_timer (&lp->watchdog_timer); |
| lp->watchdog_timer.data = (unsigned long) dev; |
| lp->watchdog_timer.function = (void *) &pcnet32_watchdog; |
| |
| /* The PCNET32-specific entries in the device structure. */ |
| dev->open = &pcnet32_open; |
| dev->hard_start_xmit = &pcnet32_start_xmit; |
| dev->stop = &pcnet32_close; |
| dev->get_stats = &pcnet32_get_stats; |
| dev->set_multicast_list = &pcnet32_set_multicast_list; |
| dev->do_ioctl = &pcnet32_ioctl; |
| dev->ethtool_ops = &pcnet32_ethtool_ops; |
| dev->tx_timeout = pcnet32_tx_timeout; |
| dev->watchdog_timeo = (5*HZ); |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| dev->poll_controller = pcnet32_poll_controller; |
| #endif |
| |
| /* Fill in the generic fields of the device structure. */ |
| if (register_netdev(dev)) |
| goto err_free_ring; |
| |
| if (pdev) { |
| pci_set_drvdata(pdev, dev); |
| } else { |
| lp->next = pcnet32_dev; |
| pcnet32_dev = dev; |
| } |
| |
| if (pcnet32_debug & NETIF_MSG_PROBE) |
| printk(KERN_INFO "%s: registered as %s\n", dev->name, lp->name); |
| cards_found++; |
| |
| /* enable LED writes */ |
| a->write_bcr(ioaddr, 2, a->read_bcr(ioaddr, 2) | 0x1000); |
| |
| return 0; |
| |
| err_free_ring: |
| pcnet32_free_ring(dev); |
| err_free_consistent: |
| pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); |
| err_free_netdev: |
| free_netdev(dev); |
| err_release_region: |
| release_region(ioaddr, PCNET32_TOTAL_SIZE); |
| return ret; |
| } |
| |
| |
| /* if any allocation fails, caller must also call pcnet32_free_ring */ |
| static int pcnet32_alloc_ring(struct net_device *dev, char *name) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| |
| lp->tx_ring = pci_alloc_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, |
| &lp->tx_ring_dma_addr); |
| if (lp->tx_ring == NULL) { |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n", |
| name); |
| return -ENOMEM; |
| } |
| |
| lp->rx_ring = pci_alloc_consistent(lp->pci_dev, |
| sizeof(struct pcnet32_rx_head) * lp->rx_ring_size, |
| &lp->rx_ring_dma_addr); |
| if (lp->rx_ring == NULL) { |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n", |
| name); |
| return -ENOMEM; |
| } |
| |
| lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, |
| GFP_ATOMIC); |
| if (!lp->tx_dma_addr) { |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); |
| return -ENOMEM; |
| } |
| memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size); |
| |
| lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, |
| GFP_ATOMIC); |
| if (!lp->rx_dma_addr) { |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); |
| return -ENOMEM; |
| } |
| memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size); |
| |
| lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, |
| GFP_ATOMIC); |
| if (!lp->tx_skbuff) { |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); |
| return -ENOMEM; |
| } |
| memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size); |
| |
| lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, |
| GFP_ATOMIC); |
| if (!lp->rx_skbuff) { |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); |
| return -ENOMEM; |
| } |
| memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size); |
| |
| return 0; |
| } |
| |
| |
| static void pcnet32_free_ring(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| |
| kfree(lp->tx_skbuff); |
| lp->tx_skbuff = NULL; |
| |
| kfree(lp->rx_skbuff); |
| lp->rx_skbuff = NULL; |
| |
| kfree(lp->tx_dma_addr); |
| lp->tx_dma_addr = NULL; |
| |
| kfree(lp->rx_dma_addr); |
| lp->rx_dma_addr = NULL; |
| |
| if (lp->tx_ring) { |
| pci_free_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, |
| lp->tx_ring, lp->tx_ring_dma_addr); |
| lp->tx_ring = NULL; |
| } |
| |
| if (lp->rx_ring) { |
| pci_free_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size, |
| lp->rx_ring, lp->rx_ring_dma_addr); |
| lp->rx_ring = NULL; |
| } |
| } |
| |
| |
| static int |
| pcnet32_open(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long ioaddr = dev->base_addr; |
| u16 val; |
| int i; |
| int rc; |
| unsigned long flags; |
| |
| if (request_irq(dev->irq, &pcnet32_interrupt, |
| lp->shared_irq ? SA_SHIRQ : 0, dev->name, (void *)dev)) { |
| return -EAGAIN; |
| } |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| /* Check for a valid station address */ |
| if (!is_valid_ether_addr(dev->dev_addr)) { |
| rc = -EINVAL; |
| goto err_free_irq; |
| } |
| |
| /* Reset the PCNET32 */ |
| lp->a.reset (ioaddr); |
| |
| /* switch pcnet32 to 32bit mode */ |
| lp->a.write_bcr (ioaddr, 20, 2); |
| |
| if (netif_msg_ifup(lp)) |
| printk(KERN_DEBUG "%s: pcnet32_open() irq %d tx/rx rings %#x/%#x init %#x.\n", |
| dev->name, dev->irq, |
| (u32) (lp->tx_ring_dma_addr), |
| (u32) (lp->rx_ring_dma_addr), |
| (u32) (lp->dma_addr + offsetof(struct pcnet32_private, init_block))); |
| |
| /* set/reset autoselect bit */ |
| val = lp->a.read_bcr (ioaddr, 2) & ~2; |
| if (lp->options & PCNET32_PORT_ASEL) |
| val |= 2; |
| lp->a.write_bcr (ioaddr, 2, val); |
| |
| /* handle full duplex setting */ |
| if (lp->mii_if.full_duplex) { |
| val = lp->a.read_bcr (ioaddr, 9) & ~3; |
| if (lp->options & PCNET32_PORT_FD) { |
| val |= 1; |
| if (lp->options == (PCNET32_PORT_FD | PCNET32_PORT_AUI)) |
| val |= 2; |
| } else if (lp->options & PCNET32_PORT_ASEL) { |
| /* workaround of xSeries250, turn on for 79C975 only */ |
| i = ((lp->a.read_csr(ioaddr, 88) | |
| (lp->a.read_csr(ioaddr,89) << 16)) >> 12) & 0xffff; |
| if (i == 0x2627) |
| val |= 3; |
| } |
| lp->a.write_bcr (ioaddr, 9, val); |
| } |
| |
| /* set/reset GPSI bit in test register */ |
| val = lp->a.read_csr (ioaddr, 124) & ~0x10; |
| if ((lp->options & PCNET32_PORT_PORTSEL) == PCNET32_PORT_GPSI) |
| val |= 0x10; |
| lp->a.write_csr (ioaddr, 124, val); |
| |
| /* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */ |
| if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT && |
| (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX || |
| lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) { |
| if (lp->options & PCNET32_PORT_ASEL) { |
| lp->options = PCNET32_PORT_FD | PCNET32_PORT_100; |
| if (netif_msg_link(lp)) |
| printk(KERN_DEBUG "%s: Setting 100Mb-Full Duplex.\n", |
| dev->name); |
| } |
| } |
| { |
| /* |
| * 24 Jun 2004 according AMD, in order to change the PHY, |
| * DANAS (or DISPM for 79C976) must be set; then select the speed, |
| * duplex, and/or enable auto negotiation, and clear DANAS |
| */ |
| if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) { |
| lp->a.write_bcr(ioaddr, 32, |
| lp->a.read_bcr(ioaddr, 32) | 0x0080); |
| /* disable Auto Negotiation, set 10Mpbs, HD */ |
| val = lp->a.read_bcr(ioaddr, 32) & ~0xb8; |
| if (lp->options & PCNET32_PORT_FD) |
| val |= 0x10; |
| if (lp->options & PCNET32_PORT_100) |
| val |= 0x08; |
| lp->a.write_bcr (ioaddr, 32, val); |
| } else { |
| if (lp->options & PCNET32_PORT_ASEL) { |
| lp->a.write_bcr(ioaddr, 32, |
| lp->a.read_bcr(ioaddr, 32) | 0x0080); |
| /* enable auto negotiate, setup, disable fd */ |
| val = lp->a.read_bcr(ioaddr, 32) & ~0x98; |
| val |= 0x20; |
| lp->a.write_bcr(ioaddr, 32, val); |
| } |
| } |
| } |
| |
| #ifdef DO_DXSUFLO |
| if (lp->dxsuflo) { /* Disable transmit stop on underflow */ |
| val = lp->a.read_csr (ioaddr, 3); |
| val |= 0x40; |
| lp->a.write_csr (ioaddr, 3, val); |
| } |
| #endif |
| |
| lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); |
| pcnet32_load_multicast(dev); |
| |
| if (pcnet32_init_ring(dev)) { |
| rc = -ENOMEM; |
| goto err_free_ring; |
| } |
| |
| /* Re-initialize the PCNET32, and start it when done. */ |
| lp->a.write_csr (ioaddr, 1, (lp->dma_addr + |
| offsetof(struct pcnet32_private, init_block)) & 0xffff); |
| lp->a.write_csr (ioaddr, 2, (lp->dma_addr + |
| offsetof(struct pcnet32_private, init_block)) >> 16); |
| |
| lp->a.write_csr (ioaddr, 4, 0x0915); |
| lp->a.write_csr (ioaddr, 0, 0x0001); |
| |
| netif_start_queue(dev); |
| |
| /* If we have mii, print the link status and start the watchdog */ |
| if (lp->mii) { |
| mii_check_media (&lp->mii_if, netif_msg_link(lp), 1); |
| mod_timer (&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT); |
| } |
| |
| i = 0; |
| while (i++ < 100) |
| if (lp->a.read_csr (ioaddr, 0) & 0x0100) |
| break; |
| /* |
| * We used to clear the InitDone bit, 0x0100, here but Mark Stockton |
| * reports that doing so triggers a bug in the '974. |
| */ |
| lp->a.write_csr (ioaddr, 0, 0x0042); |
| |
| if (netif_msg_ifup(lp)) |
| printk(KERN_DEBUG "%s: pcnet32 open after %d ticks, init block %#x csr0 %4.4x.\n", |
| dev->name, i, (u32) (lp->dma_addr + |
| offsetof(struct pcnet32_private, init_block)), |
| lp->a.read_csr(ioaddr, 0)); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return 0; /* Always succeed */ |
| |
| err_free_ring: |
| /* free any allocated skbuffs */ |
| for (i = 0; i < lp->rx_ring_size; i++) { |
| lp->rx_ring[i].status = 0; |
| if (lp->rx_skbuff[i]) { |
| pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb(lp->rx_skbuff[i]); |
| } |
| lp->rx_skbuff[i] = NULL; |
| lp->rx_dma_addr[i] = 0; |
| } |
| |
| pcnet32_free_ring(dev); |
| |
| /* |
| * Switch back to 16bit mode to avoid problems with dumb |
| * DOS packet driver after a warm reboot |
| */ |
| lp->a.write_bcr (ioaddr, 20, 4); |
| |
| err_free_irq: |
| spin_unlock_irqrestore(&lp->lock, flags); |
| free_irq(dev->irq, dev); |
| return rc; |
| } |
| |
| /* |
| * The LANCE has been halted for one reason or another (busmaster memory |
| * arbitration error, Tx FIFO underflow, driver stopped it to reconfigure, |
| * etc.). Modern LANCE variants always reload their ring-buffer |
| * configuration when restarted, so we must reinitialize our ring |
| * context before restarting. As part of this reinitialization, |
| * find all packets still on the Tx ring and pretend that they had been |
| * sent (in effect, drop the packets on the floor) - the higher-level |
| * protocols will time out and retransmit. It'd be better to shuffle |
| * these skbs to a temp list and then actually re-Tx them after |
| * restarting the chip, but I'm too lazy to do so right now. dplatt@3do.com |
| */ |
| |
| static void |
| pcnet32_purge_tx_ring(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| int i; |
| |
| for (i = 0; i < lp->tx_ring_size; i++) { |
| lp->tx_ring[i].status = 0; /* CPU owns buffer */ |
| wmb(); /* Make sure adapter sees owner change */ |
| if (lp->tx_skbuff[i]) { |
| pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i], |
| lp->tx_skbuff[i]->len, PCI_DMA_TODEVICE); |
| dev_kfree_skb_any(lp->tx_skbuff[i]); |
| } |
| lp->tx_skbuff[i] = NULL; |
| lp->tx_dma_addr[i] = 0; |
| } |
| } |
| |
| |
| /* Initialize the PCNET32 Rx and Tx rings. */ |
| static int |
| pcnet32_init_ring(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| int i; |
| |
| lp->tx_full = 0; |
| lp->cur_rx = lp->cur_tx = 0; |
| lp->dirty_rx = lp->dirty_tx = 0; |
| |
| for (i = 0; i < lp->rx_ring_size; i++) { |
| struct sk_buff *rx_skbuff = lp->rx_skbuff[i]; |
| if (rx_skbuff == NULL) { |
| if (!(rx_skbuff = lp->rx_skbuff[i] = dev_alloc_skb (PKT_BUF_SZ))) { |
| /* there is not much, we can do at this point */ |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk(KERN_ERR "%s: pcnet32_init_ring dev_alloc_skb failed.\n", |
| dev->name); |
| return -1; |
| } |
| skb_reserve (rx_skbuff, 2); |
| } |
| |
| rmb(); |
| if (lp->rx_dma_addr[i] == 0) |
| lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev, rx_skbuff->data, |
| PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE); |
| lp->rx_ring[i].base = (u32)le32_to_cpu(lp->rx_dma_addr[i]); |
| lp->rx_ring[i].buf_length = le16_to_cpu(2-PKT_BUF_SZ); |
| wmb(); /* Make sure owner changes after all others are visible */ |
| lp->rx_ring[i].status = le16_to_cpu(0x8000); |
| } |
| /* The Tx buffer address is filled in as needed, but we do need to clear |
| * the upper ownership bit. */ |
| for (i = 0; i < lp->tx_ring_size; i++) { |
| lp->tx_ring[i].status = 0; /* CPU owns buffer */ |
| wmb(); /* Make sure adapter sees owner change */ |
| lp->tx_ring[i].base = 0; |
| lp->tx_dma_addr[i] = 0; |
| } |
| |
| lp->init_block.tlen_rlen = le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits); |
| for (i = 0; i < 6; i++) |
| lp->init_block.phys_addr[i] = dev->dev_addr[i]; |
| lp->init_block.rx_ring = (u32)le32_to_cpu(lp->rx_ring_dma_addr); |
| lp->init_block.tx_ring = (u32)le32_to_cpu(lp->tx_ring_dma_addr); |
| wmb(); /* Make sure all changes are visible */ |
| return 0; |
| } |
| |
| /* the pcnet32 has been issued a stop or reset. Wait for the stop bit |
| * then flush the pending transmit operations, re-initialize the ring, |
| * and tell the chip to initialize. |
| */ |
| static void |
| pcnet32_restart(struct net_device *dev, unsigned int csr0_bits) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long ioaddr = dev->base_addr; |
| int i; |
| |
| /* wait for stop */ |
| for (i=0; i<100; i++) |
| if (lp->a.read_csr(ioaddr, 0) & 0x0004) |
| break; |
| |
| if (i >= 100 && netif_msg_drv(lp)) |
| printk(KERN_ERR "%s: pcnet32_restart timed out waiting for stop.\n", |
| dev->name); |
| |
| pcnet32_purge_tx_ring(dev); |
| if (pcnet32_init_ring(dev)) |
| return; |
| |
| /* ReInit Ring */ |
| lp->a.write_csr (ioaddr, 0, 1); |
| i = 0; |
| while (i++ < 1000) |
| if (lp->a.read_csr (ioaddr, 0) & 0x0100) |
| break; |
| |
| lp->a.write_csr (ioaddr, 0, csr0_bits); |
| } |
| |
| |
| static void |
| pcnet32_tx_timeout (struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long ioaddr = dev->base_addr, flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| /* Transmitter timeout, serious problems. */ |
| if (pcnet32_debug & NETIF_MSG_DRV) |
| printk(KERN_ERR "%s: transmit timed out, status %4.4x, resetting.\n", |
| dev->name, lp->a.read_csr(ioaddr, 0)); |
| lp->a.write_csr (ioaddr, 0, 0x0004); |
| lp->stats.tx_errors++; |
| if (netif_msg_tx_err(lp)) { |
| int i; |
| printk(KERN_DEBUG " Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.", |
| lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "", |
| lp->cur_rx); |
| for (i = 0 ; i < lp->rx_ring_size; i++) |
| printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", |
| le32_to_cpu(lp->rx_ring[i].base), |
| (-le16_to_cpu(lp->rx_ring[i].buf_length)) & 0xffff, |
| le32_to_cpu(lp->rx_ring[i].msg_length), |
| le16_to_cpu(lp->rx_ring[i].status)); |
| for (i = 0 ; i < lp->tx_ring_size; i++) |
| printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", |
| le32_to_cpu(lp->tx_ring[i].base), |
| (-le16_to_cpu(lp->tx_ring[i].length)) & 0xffff, |
| le32_to_cpu(lp->tx_ring[i].misc), |
| le16_to_cpu(lp->tx_ring[i].status)); |
| printk("\n"); |
| } |
| pcnet32_restart(dev, 0x0042); |
| |
| dev->trans_start = jiffies; |
| netif_wake_queue(dev); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| |
| static int |
| pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long ioaddr = dev->base_addr; |
| u16 status; |
| int entry; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| if (netif_msg_tx_queued(lp)) { |
| printk(KERN_DEBUG "%s: pcnet32_start_xmit() called, csr0 %4.4x.\n", |
| dev->name, lp->a.read_csr(ioaddr, 0)); |
| } |
| |
| /* Default status -- will not enable Successful-TxDone |
| * interrupt when that option is available to us. |
| */ |
| status = 0x8300; |
| |
| /* Fill in a Tx ring entry */ |
| |
| /* Mask to ring buffer boundary. */ |
| entry = lp->cur_tx & lp->tx_mod_mask; |
| |
| /* Caution: the write order is important here, set the status |
| * with the "ownership" bits last. */ |
| |
| lp->tx_ring[entry].length = le16_to_cpu(-skb->len); |
| |
| lp->tx_ring[entry].misc = 0x00000000; |
| |
| lp->tx_skbuff[entry] = skb; |
| lp->tx_dma_addr[entry] = pci_map_single(lp->pci_dev, skb->data, skb->len, |
| PCI_DMA_TODEVICE); |
| lp->tx_ring[entry].base = (u32)le32_to_cpu(lp->tx_dma_addr[entry]); |
| wmb(); /* Make sure owner changes after all others are visible */ |
| lp->tx_ring[entry].status = le16_to_cpu(status); |
| |
| lp->cur_tx++; |
| lp->stats.tx_bytes += skb->len; |
| |
| /* Trigger an immediate send poll. */ |
| lp->a.write_csr (ioaddr, 0, 0x0048); |
| |
| dev->trans_start = jiffies; |
| |
| if (lp->tx_ring[(entry+1) & lp->tx_mod_mask].base != 0) { |
| lp->tx_full = 1; |
| netif_stop_queue(dev); |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return 0; |
| } |
| |
| /* The PCNET32 interrupt handler. */ |
| static irqreturn_t |
| pcnet32_interrupt(int irq, void *dev_id, struct pt_regs * regs) |
| { |
| struct net_device *dev = dev_id; |
| struct pcnet32_private *lp; |
| unsigned long ioaddr; |
| u16 csr0,rap; |
| int boguscnt = max_interrupt_work; |
| int must_restart; |
| |
| if (!dev) { |
| if (pcnet32_debug & NETIF_MSG_INTR) |
| printk (KERN_DEBUG "%s(): irq %d for unknown device\n", |
| __FUNCTION__, irq); |
| return IRQ_NONE; |
| } |
| |
| ioaddr = dev->base_addr; |
| lp = dev->priv; |
| |
| spin_lock(&lp->lock); |
| |
| rap = lp->a.read_rap(ioaddr); |
| while ((csr0 = lp->a.read_csr (ioaddr, 0)) & 0x8f00 && --boguscnt >= 0) { |
| if (csr0 == 0xffff) { |
| break; /* PCMCIA remove happened */ |
| } |
| /* Acknowledge all of the current interrupt sources ASAP. */ |
| lp->a.write_csr (ioaddr, 0, csr0 & ~0x004f); |
| |
| must_restart = 0; |
| |
| if (netif_msg_intr(lp)) |
| printk(KERN_DEBUG "%s: interrupt csr0=%#2.2x new csr=%#2.2x.\n", |
| dev->name, csr0, lp->a.read_csr (ioaddr, 0)); |
| |
| if (csr0 & 0x0400) /* Rx interrupt */ |
| pcnet32_rx(dev); |
| |
| if (csr0 & 0x0200) { /* Tx-done interrupt */ |
| unsigned int dirty_tx = lp->dirty_tx; |
| int delta; |
| |
| while (dirty_tx != lp->cur_tx) { |
| int entry = dirty_tx & lp->tx_mod_mask; |
| int status = (short)le16_to_cpu(lp->tx_ring[entry].status); |
| |
| if (status < 0) |
| break; /* It still hasn't been Txed */ |
| |
| lp->tx_ring[entry].base = 0; |
| |
| if (status & 0x4000) { |
| /* There was an major error, log it. */ |
| int err_status = le32_to_cpu(lp->tx_ring[entry].misc); |
| lp->stats.tx_errors++; |
| if (netif_msg_tx_err(lp)) |
| printk(KERN_ERR "%s: Tx error status=%04x err_status=%08x\n", |
| dev->name, status, err_status); |
| if (err_status & 0x04000000) lp->stats.tx_aborted_errors++; |
| if (err_status & 0x08000000) lp->stats.tx_carrier_errors++; |
| if (err_status & 0x10000000) lp->stats.tx_window_errors++; |
| #ifndef DO_DXSUFLO |
| if (err_status & 0x40000000) { |
| lp->stats.tx_fifo_errors++; |
| /* Ackk! On FIFO errors the Tx unit is turned off! */ |
| /* Remove this verbosity later! */ |
| if (netif_msg_tx_err(lp)) |
| printk(KERN_ERR "%s: Tx FIFO error! CSR0=%4.4x\n", |
| dev->name, csr0); |
| must_restart = 1; |
| } |
| #else |
| if (err_status & 0x40000000) { |
| lp->stats.tx_fifo_errors++; |
| if (! lp->dxsuflo) { /* If controller doesn't recover ... */ |
| /* Ackk! On FIFO errors the Tx unit is turned off! */ |
| /* Remove this verbosity later! */ |
| if (netif_msg_tx_err(lp)) |
| printk(KERN_ERR "%s: Tx FIFO error! CSR0=%4.4x\n", |
| dev->name, csr0); |
| must_restart = 1; |
| } |
| } |
| #endif |
| } else { |
| if (status & 0x1800) |
| lp->stats.collisions++; |
| lp->stats.tx_packets++; |
| } |
| |
| /* We must free the original skb */ |
| if (lp->tx_skbuff[entry]) { |
| pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[entry], |
| lp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE); |
| dev_kfree_skb_irq(lp->tx_skbuff[entry]); |
| lp->tx_skbuff[entry] = NULL; |
| lp->tx_dma_addr[entry] = 0; |
| } |
| dirty_tx++; |
| } |
| |
| delta = (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask + lp->tx_ring_size); |
| if (delta > lp->tx_ring_size) { |
| if (netif_msg_drv(lp)) |
| printk(KERN_ERR "%s: out-of-sync dirty pointer, %d vs. %d, full=%d.\n", |
| dev->name, dirty_tx, lp->cur_tx, lp->tx_full); |
| dirty_tx += lp->tx_ring_size; |
| delta -= lp->tx_ring_size; |
| } |
| |
| if (lp->tx_full && |
| netif_queue_stopped(dev) && |
| delta < lp->tx_ring_size - 2) { |
| /* The ring is no longer full, clear tbusy. */ |
| lp->tx_full = 0; |
| netif_wake_queue (dev); |
| } |
| lp->dirty_tx = dirty_tx; |
| } |
| |
| /* Log misc errors. */ |
| if (csr0 & 0x4000) lp->stats.tx_errors++; /* Tx babble. */ |
| if (csr0 & 0x1000) { |
| /* |
| * this happens when our receive ring is full. This shouldn't |
| * be a problem as we will see normal rx interrupts for the frames |
| * in the receive ring. But there are some PCI chipsets (I can |
| * reproduce this on SP3G with Intel saturn chipset) which have |
| * sometimes problems and will fill up the receive ring with |
| * error descriptors. In this situation we don't get a rx |
| * interrupt, but a missed frame interrupt sooner or later. |
| * So we try to clean up our receive ring here. |
| */ |
| pcnet32_rx(dev); |
| lp->stats.rx_errors++; /* Missed a Rx frame. */ |
| } |
| if (csr0 & 0x0800) { |
| if (netif_msg_drv(lp)) |
| printk(KERN_ERR "%s: Bus master arbitration failure, status %4.4x.\n", |
| dev->name, csr0); |
| /* unlike for the lance, there is no restart needed */ |
| } |
| |
| if (must_restart) { |
| /* reset the chip to clear the error condition, then restart */ |
| lp->a.reset(ioaddr); |
| lp->a.write_csr(ioaddr, 4, 0x0915); |
| pcnet32_restart(dev, 0x0002); |
| netif_wake_queue(dev); |
| } |
| } |
| |
| /* Set interrupt enable. */ |
| lp->a.write_csr (ioaddr, 0, 0x0040); |
| lp->a.write_rap (ioaddr,rap); |
| |
| if (netif_msg_intr(lp)) |
| printk(KERN_DEBUG "%s: exiting interrupt, csr0=%#4.4x.\n", |
| dev->name, lp->a.read_csr (ioaddr, 0)); |
| |
| spin_unlock(&lp->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int |
| pcnet32_rx(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| int entry = lp->cur_rx & lp->rx_mod_mask; |
| int boguscnt = lp->rx_ring_size / 2; |
| |
| /* If we own the next entry, it's a new packet. Send it up. */ |
| while ((short)le16_to_cpu(lp->rx_ring[entry].status) >= 0) { |
| int status = (short)le16_to_cpu(lp->rx_ring[entry].status) >> 8; |
| |
| if (status != 0x03) { /* There was an error. */ |
| /* |
| * There is a tricky error noted by John Murphy, |
| * <murf@perftech.com> to Russ Nelson: Even with full-sized |
| * buffers it's possible for a jabber packet to use two |
| * buffers, with only the last correctly noting the error. |
| */ |
| if (status & 0x01) /* Only count a general error at the */ |
| lp->stats.rx_errors++; /* end of a packet.*/ |
| if (status & 0x20) lp->stats.rx_frame_errors++; |
| if (status & 0x10) lp->stats.rx_over_errors++; |
| if (status & 0x08) lp->stats.rx_crc_errors++; |
| if (status & 0x04) lp->stats.rx_fifo_errors++; |
| lp->rx_ring[entry].status &= le16_to_cpu(0x03ff); |
| } else { |
| /* Malloc up new buffer, compatible with net-2e. */ |
| short pkt_len = (le32_to_cpu(lp->rx_ring[entry].msg_length) & 0xfff)-4; |
| struct sk_buff *skb; |
| |
| /* Discard oversize frames. */ |
| if (unlikely(pkt_len > PKT_BUF_SZ - 2)) { |
| if (netif_msg_drv(lp)) |
| printk(KERN_ERR "%s: Impossible packet size %d!\n", |
| dev->name, pkt_len); |
| lp->stats.rx_errors++; |
| } else if (pkt_len < 60) { |
| if (netif_msg_rx_err(lp)) |
| printk(KERN_ERR "%s: Runt packet!\n", dev->name); |
| lp->stats.rx_errors++; |
| } else { |
| int rx_in_place = 0; |
| |
| if (pkt_len > rx_copybreak) { |
| struct sk_buff *newskb; |
| |
| if ((newskb = dev_alloc_skb(PKT_BUF_SZ))) { |
| skb_reserve (newskb, 2); |
| skb = lp->rx_skbuff[entry]; |
| pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[entry], |
| PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE); |
| skb_put (skb, pkt_len); |
| lp->rx_skbuff[entry] = newskb; |
| newskb->dev = dev; |
| lp->rx_dma_addr[entry] = |
| pci_map_single(lp->pci_dev, newskb->data, |
| PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE); |
| lp->rx_ring[entry].base = le32_to_cpu(lp->rx_dma_addr[entry]); |
| rx_in_place = 1; |
| } else |
| skb = NULL; |
| } else { |
| skb = dev_alloc_skb(pkt_len+2); |
| } |
| |
| if (skb == NULL) { |
| int i; |
| if (netif_msg_drv(lp)) |
| printk(KERN_ERR "%s: Memory squeeze, deferring packet.\n", |
| dev->name); |
| for (i = 0; i < lp->rx_ring_size; i++) |
| if ((short)le16_to_cpu(lp->rx_ring[(entry+i) |
| & lp->rx_mod_mask].status) < 0) |
| break; |
| |
| if (i > lp->rx_ring_size -2) { |
| lp->stats.rx_dropped++; |
| lp->rx_ring[entry].status |= le16_to_cpu(0x8000); |
| wmb(); /* Make sure adapter sees owner change */ |
| lp->cur_rx++; |
| } |
| break; |
| } |
| skb->dev = dev; |
| if (!rx_in_place) { |
| skb_reserve(skb,2); /* 16 byte align */ |
| skb_put(skb,pkt_len); /* Make room */ |
| pci_dma_sync_single_for_cpu(lp->pci_dev, |
| lp->rx_dma_addr[entry], |
| PKT_BUF_SZ-2, |
| PCI_DMA_FROMDEVICE); |
| eth_copy_and_sum(skb, |
| (unsigned char *)(lp->rx_skbuff[entry]->data), |
| pkt_len,0); |
| pci_dma_sync_single_for_device(lp->pci_dev, |
| lp->rx_dma_addr[entry], |
| PKT_BUF_SZ-2, |
| PCI_DMA_FROMDEVICE); |
| } |
| lp->stats.rx_bytes += skb->len; |
| skb->protocol=eth_type_trans(skb,dev); |
| netif_rx(skb); |
| dev->last_rx = jiffies; |
| lp->stats.rx_packets++; |
| } |
| } |
| /* |
| * The docs say that the buffer length isn't touched, but Andrew Boyd |
| * of QNX reports that some revs of the 79C965 clear it. |
| */ |
| lp->rx_ring[entry].buf_length = le16_to_cpu(2-PKT_BUF_SZ); |
| wmb(); /* Make sure owner changes after all others are visible */ |
| lp->rx_ring[entry].status |= le16_to_cpu(0x8000); |
| entry = (++lp->cur_rx) & lp->rx_mod_mask; |
| if (--boguscnt <= 0) break; /* don't stay in loop forever */ |
| } |
| |
| return 0; |
| } |
| |
| static int |
| pcnet32_close(struct net_device *dev) |
| { |
| unsigned long ioaddr = dev->base_addr; |
| struct pcnet32_private *lp = dev->priv; |
| int i; |
| unsigned long flags; |
| |
| del_timer_sync(&lp->watchdog_timer); |
| |
| netif_stop_queue(dev); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| lp->stats.rx_missed_errors = lp->a.read_csr (ioaddr, 112); |
| |
| if (netif_msg_ifdown(lp)) |
| printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n", |
| dev->name, lp->a.read_csr (ioaddr, 0)); |
| |
| /* We stop the PCNET32 here -- it occasionally polls memory if we don't. */ |
| lp->a.write_csr (ioaddr, 0, 0x0004); |
| |
| /* |
| * Switch back to 16bit mode to avoid problems with dumb |
| * DOS packet driver after a warm reboot |
| */ |
| lp->a.write_bcr (ioaddr, 20, 4); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| free_irq(dev->irq, dev); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| /* free all allocated skbuffs */ |
| for (i = 0; i < lp->rx_ring_size; i++) { |
| lp->rx_ring[i].status = 0; |
| wmb(); /* Make sure adapter sees owner change */ |
| if (lp->rx_skbuff[i]) { |
| pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb(lp->rx_skbuff[i]); |
| } |
| lp->rx_skbuff[i] = NULL; |
| lp->rx_dma_addr[i] = 0; |
| } |
| |
| for (i = 0; i < lp->tx_ring_size; i++) { |
| lp->tx_ring[i].status = 0; /* CPU owns buffer */ |
| wmb(); /* Make sure adapter sees owner change */ |
| if (lp->tx_skbuff[i]) { |
| pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i], |
| lp->tx_skbuff[i]->len, PCI_DMA_TODEVICE); |
| dev_kfree_skb(lp->tx_skbuff[i]); |
| } |
| lp->tx_skbuff[i] = NULL; |
| lp->tx_dma_addr[i] = 0; |
| } |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return 0; |
| } |
| |
| static struct net_device_stats * |
| pcnet32_get_stats(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long ioaddr = dev->base_addr; |
| u16 saved_addr; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| saved_addr = lp->a.read_rap(ioaddr); |
| lp->stats.rx_missed_errors = lp->a.read_csr (ioaddr, 112); |
| lp->a.write_rap(ioaddr, saved_addr); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return &lp->stats; |
| } |
| |
| /* taken from the sunlance driver, which it took from the depca driver */ |
| static void pcnet32_load_multicast (struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| volatile struct pcnet32_init_block *ib = &lp->init_block; |
| volatile u16 *mcast_table = (u16 *)&ib->filter; |
| struct dev_mc_list *dmi=dev->mc_list; |
| char *addrs; |
| int i; |
| u32 crc; |
| |
| /* set all multicast bits */ |
| if (dev->flags & IFF_ALLMULTI) { |
| ib->filter[0] = 0xffffffff; |
| ib->filter[1] = 0xffffffff; |
| return; |
| } |
| /* clear the multicast filter */ |
| ib->filter[0] = 0; |
| ib->filter[1] = 0; |
| |
| /* Add addresses */ |
| for (i = 0; i < dev->mc_count; i++) { |
| addrs = dmi->dmi_addr; |
| dmi = dmi->next; |
| |
| /* multicast address? */ |
| if (!(*addrs & 1)) |
| continue; |
| |
| crc = ether_crc_le(6, addrs); |
| crc = crc >> 26; |
| mcast_table [crc >> 4] = le16_to_cpu( |
| le16_to_cpu(mcast_table [crc >> 4]) | (1 << (crc & 0xf))); |
| } |
| return; |
| } |
| |
| |
| /* |
| * Set or clear the multicast filter for this adaptor. |
| */ |
| static void pcnet32_set_multicast_list(struct net_device *dev) |
| { |
| unsigned long ioaddr = dev->base_addr, flags; |
| struct pcnet32_private *lp = dev->priv; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| if (dev->flags&IFF_PROMISC) { |
| /* Log any net taps. */ |
| if (netif_msg_hw(lp)) |
| printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name); |
| lp->init_block.mode = le16_to_cpu(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) << 7); |
| } else { |
| lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); |
| pcnet32_load_multicast (dev); |
| } |
| |
| lp->a.write_csr (ioaddr, 0, 0x0004); /* Temporarily stop the lance. */ |
| pcnet32_restart(dev, 0x0042); /* Resume normal operation */ |
| netif_wake_queue(dev); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| /* This routine assumes that the lp->lock is held */ |
| static int mdio_read(struct net_device *dev, int phy_id, int reg_num) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long ioaddr = dev->base_addr; |
| u16 val_out; |
| |
| if (!lp->mii) |
| return 0; |
| |
| lp->a.write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f)); |
| val_out = lp->a.read_bcr(ioaddr, 34); |
| |
| return val_out; |
| } |
| |
| /* This routine assumes that the lp->lock is held */ |
| static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long ioaddr = dev->base_addr; |
| |
| if (!lp->mii) |
| return; |
| |
| lp->a.write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f)); |
| lp->a.write_bcr(ioaddr, 34, val); |
| } |
| |
| static int pcnet32_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| int rc; |
| unsigned long flags; |
| |
| /* SIOC[GS]MIIxxx ioctls */ |
| if (lp->mii) { |
| spin_lock_irqsave(&lp->lock, flags); |
| rc = generic_mii_ioctl(&lp->mii_if, if_mii(rq), cmd, NULL); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } else { |
| rc = -EOPNOTSUPP; |
| } |
| |
| return rc; |
| } |
| |
| static void pcnet32_watchdog(struct net_device *dev) |
| { |
| struct pcnet32_private *lp = dev->priv; |
| unsigned long flags; |
| |
| /* Print the link status if it has changed */ |
| if (lp->mii) { |
| spin_lock_irqsave(&lp->lock, flags); |
| mii_check_media (&lp->mii_if, netif_msg_link(lp), 0); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| mod_timer (&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT); |
| } |
| |
| static void __devexit pcnet32_remove_one(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| |
| if (dev) { |
| struct pcnet32_private *lp = dev->priv; |
| |
| unregister_netdev(dev); |
| pcnet32_free_ring(dev); |
| release_region(dev->base_addr, PCNET32_TOTAL_SIZE); |
| pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); |
| free_netdev(dev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| } |
| |
| static struct pci_driver pcnet32_driver = { |
| .name = DRV_NAME, |
| .probe = pcnet32_probe_pci, |
| .remove = __devexit_p(pcnet32_remove_one), |
| .id_table = pcnet32_pci_tbl, |
| }; |
| |
| /* An additional parameter that may be passed in... */ |
| static int debug = -1; |
| static int tx_start_pt = -1; |
| static int pcnet32_have_pci; |
| |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, DRV_NAME " debug level"); |
| module_param(max_interrupt_work, int, 0); |
| MODULE_PARM_DESC(max_interrupt_work, DRV_NAME " maximum events handled per interrupt"); |
| module_param(rx_copybreak, int, 0); |
| MODULE_PARM_DESC(rx_copybreak, DRV_NAME " copy breakpoint for copy-only-tiny-frames"); |
| module_param(tx_start_pt, int, 0); |
| MODULE_PARM_DESC(tx_start_pt, DRV_NAME " transmit start point (0-3)"); |
| module_param(pcnet32vlb, int, 0); |
| MODULE_PARM_DESC(pcnet32vlb, DRV_NAME " Vesa local bus (VLB) support (0/1)"); |
| module_param_array(options, int, NULL, 0); |
| MODULE_PARM_DESC(options, DRV_NAME " initial option setting(s) (0-15)"); |
| module_param_array(full_duplex, int, NULL, 0); |
| MODULE_PARM_DESC(full_duplex, DRV_NAME " full duplex setting(s) (1)"); |
| /* Module Parameter for HomePNA cards added by Patrick Simmons, 2004 */ |
| module_param_array(homepna, int, NULL, 0); |
| MODULE_PARM_DESC(homepna, DRV_NAME " mode for 79C978 cards (1 for HomePNA, 0 for Ethernet, default Ethernet"); |
| |
| MODULE_AUTHOR("Thomas Bogendoerfer"); |
| MODULE_DESCRIPTION("Driver for PCnet32 and PCnetPCI based ethercards"); |
| MODULE_LICENSE("GPL"); |
| |
| #define PCNET32_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) |
| |
| static int __init pcnet32_init_module(void) |
| { |
| printk(KERN_INFO "%s", version); |
| |
| pcnet32_debug = netif_msg_init(debug, PCNET32_MSG_DEFAULT); |
| |
| if ((tx_start_pt >= 0) && (tx_start_pt <= 3)) |
| tx_start = tx_start_pt; |
| |
| /* find the PCI devices */ |
| if (!pci_module_init(&pcnet32_driver)) |
| pcnet32_have_pci = 1; |
| |
| /* should we find any remaining VLbus devices ? */ |
| if (pcnet32vlb) |
| pcnet32_probe_vlbus(); |
| |
| if (cards_found && (pcnet32_debug & NETIF_MSG_PROBE)) |
| printk(KERN_INFO PFX "%d cards_found.\n", cards_found); |
| |
| return (pcnet32_have_pci + cards_found) ? 0 : -ENODEV; |
| } |
| |
| static void __exit pcnet32_cleanup_module(void) |
| { |
| struct net_device *next_dev; |
| |
| while (pcnet32_dev) { |
| struct pcnet32_private *lp = pcnet32_dev->priv; |
| next_dev = lp->next; |
| unregister_netdev(pcnet32_dev); |
| pcnet32_free_ring(pcnet32_dev); |
| release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE); |
| pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); |
| free_netdev(pcnet32_dev); |
| pcnet32_dev = next_dev; |
| } |
| |
| if (pcnet32_have_pci) |
| pci_unregister_driver(&pcnet32_driver); |
| } |
| |
| module_init(pcnet32_init_module); |
| module_exit(pcnet32_cleanup_module); |
| |
| /* |
| * Local variables: |
| * c-indent-level: 4 |
| * tab-width: 8 |
| * End: |
| */ |