| /* |
| * OMAP44xx sleep code. |
| * |
| * Copyright (C) 2011 Texas Instruments, Inc. |
| * Santosh Shilimkar <santosh.shilimkar@ti.com> |
| * |
| * This program is free software,you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/linkage.h> |
| #include <asm/assembler.h> |
| #include <asm/smp_scu.h> |
| #include <asm/memory.h> |
| #include <asm/hardware/cache-l2x0.h> |
| |
| #include "omap-secure.h" |
| |
| #include "common.h" |
| #include "omap44xx.h" |
| #include "omap4-sar-layout.h" |
| |
| #if defined(CONFIG_SMP) && defined(CONFIG_PM) |
| |
| .macro DO_SMC |
| dsb |
| smc #0 |
| dsb |
| .endm |
| |
| ppa_zero_params: |
| .word 0x0 |
| |
| ppa_por_params: |
| .word 1, 0 |
| |
| #ifdef CONFIG_ARCH_OMAP4 |
| |
| /* |
| * ============================= |
| * == CPU suspend finisher == |
| * ============================= |
| * |
| * void omap4_finish_suspend(unsigned long cpu_state) |
| * |
| * This function code saves the CPU context and performs the CPU |
| * power down sequence. Calling WFI effectively changes the CPU |
| * power domains states to the desired target power state. |
| * |
| * @cpu_state : contains context save state (r0) |
| * 0 - No context lost |
| * 1 - CPUx L1 and logic lost: MPUSS CSWR |
| * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR |
| * 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF |
| * @return: This function never returns for CPU OFF and DORMANT power states. |
| * Post WFI, CPU transitions to DORMANT or OFF power state and on wake-up |
| * from this follows a full CPU reset path via ROM code to CPU restore code. |
| * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. |
| * It returns to the caller for CPU INACTIVE and ON power states or in case |
| * CPU failed to transition to targeted OFF/DORMANT state. |
| * |
| * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save |
| * stack frame and it expects the caller to take care of it. Hence the entire |
| * stack frame is saved to avoid possible stack corruption. |
| */ |
| ENTRY(omap4_finish_suspend) |
| stmfd sp!, {r4-r12, lr} |
| cmp r0, #0x0 |
| beq do_WFI @ No lowpower state, jump to WFI |
| |
| /* |
| * Flush all data from the L1 data cache before disabling |
| * SCTLR.C bit. |
| */ |
| bl omap4_get_sar_ram_base |
| ldr r9, [r0, #OMAP_TYPE_OFFSET] |
| cmp r9, #0x1 @ Check for HS device |
| bne skip_secure_l1_clean |
| mov r0, #SCU_PM_NORMAL |
| mov r1, #0xFF @ clean seucre L1 |
| stmfd r13!, {r4-r12, r14} |
| ldr r12, =OMAP4_MON_SCU_PWR_INDEX |
| DO_SMC |
| ldmfd r13!, {r4-r12, r14} |
| skip_secure_l1_clean: |
| bl v7_flush_dcache_all |
| |
| /* |
| * Clear the SCTLR.C bit to prevent further data cache |
| * allocation. Clearing SCTLR.C would make all the data accesses |
| * strongly ordered and would not hit the cache. |
| */ |
| mrc p15, 0, r0, c1, c0, 0 |
| bic r0, r0, #(1 << 2) @ Disable the C bit |
| mcr p15, 0, r0, c1, c0, 0 |
| isb |
| |
| /* |
| * Invalidate L1 data cache. Even though only invalidate is |
| * necessary exported flush API is used here. Doing clean |
| * on already clean cache would be almost NOP. |
| */ |
| bl v7_flush_dcache_all |
| |
| /* |
| * Switch the CPU from Symmetric Multiprocessing (SMP) mode |
| * to AsymmetricMultiprocessing (AMP) mode by programming |
| * the SCU power status to DORMANT or OFF mode. |
| * This enables the CPU to be taken out of coherency by |
| * preventing the CPU from receiving cache, TLB, or BTB |
| * maintenance operations broadcast by other CPUs in the cluster. |
| */ |
| bl omap4_get_sar_ram_base |
| mov r8, r0 |
| ldr r9, [r8, #OMAP_TYPE_OFFSET] |
| cmp r9, #0x1 @ Check for HS device |
| bne scu_gp_set |
| mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR |
| ands r0, r0, #0x0f |
| ldreq r0, [r8, #SCU_OFFSET0] |
| ldrne r0, [r8, #SCU_OFFSET1] |
| mov r1, #0x00 |
| stmfd r13!, {r4-r12, r14} |
| ldr r12, =OMAP4_MON_SCU_PWR_INDEX |
| DO_SMC |
| ldmfd r13!, {r4-r12, r14} |
| b skip_scu_gp_set |
| scu_gp_set: |
| mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR |
| ands r0, r0, #0x0f |
| ldreq r1, [r8, #SCU_OFFSET0] |
| ldrne r1, [r8, #SCU_OFFSET1] |
| bl omap4_get_scu_base |
| bl scu_power_mode |
| skip_scu_gp_set: |
| mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data |
| tst r0, #(1 << 18) |
| mrcne p15, 0, r0, c1, c0, 1 |
| bicne r0, r0, #(1 << 6) @ Disable SMP bit |
| mcrne p15, 0, r0, c1, c0, 1 |
| isb |
| dsb |
| #ifdef CONFIG_CACHE_L2X0 |
| /* |
| * Clean and invalidate the L2 cache. |
| * Common cache-l2x0.c functions can't be used here since it |
| * uses spinlocks. We are out of coherency here with data cache |
| * disabled. The spinlock implementation uses exclusive load/store |
| * instruction which can fail without data cache being enabled. |
| * OMAP4 hardware doesn't support exclusive monitor which can |
| * overcome exclusive access issue. Because of this, CPU can |
| * lead to deadlock. |
| */ |
| bl omap4_get_sar_ram_base |
| mov r8, r0 |
| mrc p15, 0, r5, c0, c0, 5 @ Read MPIDR |
| ands r5, r5, #0x0f |
| ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR |
| ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory. |
| cmp r0, #3 |
| bne do_WFI |
| #ifdef CONFIG_PL310_ERRATA_727915 |
| mov r0, #0x03 |
| mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX |
| DO_SMC |
| #endif |
| bl omap4_get_l2cache_base |
| mov r2, r0 |
| ldr r0, =0xffff |
| str r0, [r2, #L2X0_CLEAN_INV_WAY] |
| wait: |
| ldr r0, [r2, #L2X0_CLEAN_INV_WAY] |
| ldr r1, =0xffff |
| ands r0, r0, r1 |
| bne wait |
| #ifdef CONFIG_PL310_ERRATA_727915 |
| mov r0, #0x00 |
| mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX |
| DO_SMC |
| #endif |
| l2x_sync: |
| bl omap4_get_l2cache_base |
| mov r2, r0 |
| mov r0, #0x0 |
| str r0, [r2, #L2X0_CACHE_SYNC] |
| sync: |
| ldr r0, [r2, #L2X0_CACHE_SYNC] |
| ands r0, r0, #0x1 |
| bne sync |
| #endif |
| |
| do_WFI: |
| bl omap_do_wfi |
| |
| /* |
| * CPU is here when it failed to enter OFF/DORMANT or |
| * no low power state was attempted. |
| */ |
| mrc p15, 0, r0, c1, c0, 0 |
| tst r0, #(1 << 2) @ Check C bit enabled? |
| orreq r0, r0, #(1 << 2) @ Enable the C bit |
| mcreq p15, 0, r0, c1, c0, 0 |
| isb |
| |
| /* |
| * Ensure the CPU power state is set to NORMAL in |
| * SCU power state so that CPU is back in coherency. |
| * In non-coherent mode CPU can lock-up and lead to |
| * system deadlock. |
| */ |
| mrc p15, 0, r0, c1, c0, 1 |
| tst r0, #(1 << 6) @ Check SMP bit enabled? |
| orreq r0, r0, #(1 << 6) |
| mcreq p15, 0, r0, c1, c0, 1 |
| isb |
| bl omap4_get_sar_ram_base |
| mov r8, r0 |
| ldr r9, [r8, #OMAP_TYPE_OFFSET] |
| cmp r9, #0x1 @ Check for HS device |
| bne scu_gp_clear |
| mov r0, #SCU_PM_NORMAL |
| mov r1, #0x00 |
| stmfd r13!, {r4-r12, r14} |
| ldr r12, =OMAP4_MON_SCU_PWR_INDEX |
| DO_SMC |
| ldmfd r13!, {r4-r12, r14} |
| b skip_scu_gp_clear |
| scu_gp_clear: |
| bl omap4_get_scu_base |
| mov r1, #SCU_PM_NORMAL |
| bl scu_power_mode |
| skip_scu_gp_clear: |
| isb |
| dsb |
| ldmfd sp!, {r4-r12, pc} |
| ENDPROC(omap4_finish_suspend) |
| |
| /* |
| * ============================ |
| * == CPU resume entry point == |
| * ============================ |
| * |
| * void omap4_cpu_resume(void) |
| * |
| * ROM code jumps to this function while waking up from CPU |
| * OFF or DORMANT state. Physical address of the function is |
| * stored in the SAR RAM while entering to OFF or DORMANT mode. |
| * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. |
| */ |
| ENTRY(omap4_cpu_resume) |
| /* |
| * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. |
| * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA |
| * init and for CPU1, a secure PPA API provided. CPU0 must be ON |
| * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+. |
| * OMAP443X GP devices- SMP bit isn't accessible. |
| * OMAP446X GP devices - SMP bit access is enabled on both CPUs. |
| */ |
| ldr r8, =OMAP44XX_SAR_RAM_BASE |
| ldr r9, [r8, #OMAP_TYPE_OFFSET] |
| cmp r9, #0x1 @ Skip if GP device |
| bne skip_ns_smp_enable |
| mrc p15, 0, r0, c0, c0, 5 |
| ands r0, r0, #0x0f |
| beq skip_ns_smp_enable |
| ppa_actrl_retry: |
| mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX |
| adr r3, ppa_zero_params @ Pointer to parameters |
| mov r1, #0x0 @ Process ID |
| mov r2, #0x4 @ Flag |
| mov r6, #0xff |
| mov r12, #0x00 @ Secure Service ID |
| DO_SMC |
| cmp r0, #0x0 @ API returns 0 on success. |
| beq enable_smp_bit |
| b ppa_actrl_retry |
| enable_smp_bit: |
| mrc p15, 0, r0, c1, c0, 1 |
| tst r0, #(1 << 6) @ Check SMP bit enabled? |
| orreq r0, r0, #(1 << 6) |
| mcreq p15, 0, r0, c1, c0, 1 |
| isb |
| skip_ns_smp_enable: |
| #ifdef CONFIG_CACHE_L2X0 |
| /* |
| * Restore the L2 AUXCTRL and enable the L2 cache. |
| * OMAP4_MON_L2X0_AUXCTRL_INDEX = Program the L2X0 AUXCTRL |
| * OMAP4_MON_L2X0_CTRL_INDEX = Enable the L2 using L2X0 CTRL |
| * register r0 contains value to be programmed. |
| * L2 cache is already invalidate by ROM code as part |
| * of MPUSS OFF wakeup path. |
| */ |
| ldr r2, =OMAP44XX_L2CACHE_BASE |
| ldr r0, [r2, #L2X0_CTRL] |
| and r0, #0x0f |
| cmp r0, #1 |
| beq skip_l2en @ Skip if already enabled |
| ldr r3, =OMAP44XX_SAR_RAM_BASE |
| ldr r1, [r3, #OMAP_TYPE_OFFSET] |
| cmp r1, #0x1 @ Check for HS device |
| bne set_gp_por |
| ldr r0, =OMAP4_PPA_L2_POR_INDEX |
| ldr r1, =OMAP44XX_SAR_RAM_BASE |
| ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] |
| adr r3, ppa_por_params |
| str r4, [r3, #0x04] |
| mov r1, #0x0 @ Process ID |
| mov r2, #0x4 @ Flag |
| mov r6, #0xff |
| mov r12, #0x00 @ Secure Service ID |
| DO_SMC |
| b set_aux_ctrl |
| set_gp_por: |
| ldr r1, =OMAP44XX_SAR_RAM_BASE |
| ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET] |
| ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH |
| DO_SMC |
| set_aux_ctrl: |
| ldr r1, =OMAP44XX_SAR_RAM_BASE |
| ldr r0, [r1, #L2X0_AUXCTRL_OFFSET] |
| ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL |
| DO_SMC |
| mov r0, #0x1 |
| ldr r12, =OMAP4_MON_L2X0_CTRL_INDEX @ Enable L2 cache |
| DO_SMC |
| skip_l2en: |
| #endif |
| |
| b cpu_resume @ Jump to generic resume |
| ENDPROC(omap4_cpu_resume) |
| #endif /* CONFIG_ARCH_OMAP4 */ |
| |
| #endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */ |
| |
| #ifndef CONFIG_OMAP4_ERRATA_I688 |
| ENTRY(omap_bus_sync) |
| ret lr |
| ENDPROC(omap_bus_sync) |
| #endif |
| |
| ENTRY(omap_do_wfi) |
| stmfd sp!, {lr} |
| /* Drain interconnect write buffers. */ |
| bl omap_bus_sync |
| |
| /* |
| * Execute an ISB instruction to ensure that all of the |
| * CP15 register changes have been committed. |
| */ |
| isb |
| |
| /* |
| * Execute a barrier instruction to ensure that all cache, |
| * TLB and branch predictor maintenance operations issued |
| * by any CPU in the cluster have completed. |
| */ |
| dsb |
| dmb |
| |
| /* |
| * Execute a WFI instruction and wait until the |
| * STANDBYWFI output is asserted to indicate that the |
| * CPU is in idle and low power state. CPU can specualatively |
| * prefetch the instructions so add NOPs after WFI. Sixteen |
| * NOPs as per Cortex-A9 pipeline. |
| */ |
| wfi @ Wait For Interrupt |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| ldmfd sp!, {pc} |
| ENDPROC(omap_do_wfi) |