| /* |
| * drivers/mtd/nand/nomadik_nand.c |
| * |
| * Overview: |
| * Driver for on-board NAND flash on Nomadik Platforms |
| * |
| * Copyright © 2007 STMicroelectronics Pvt. Ltd. |
| * Author: Sachin Verma <sachin.verma@st.com> |
| * |
| * Copyright © 2009 Alessandro Rubini |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/nand_ecc.h> |
| #include <linux/platform_device.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/platform_data/mtd-nomadik-nand.h> |
| #include <mach/fsmc.h> |
| |
| #include <mtd/mtd-abi.h> |
| |
| struct nomadik_nand_host { |
| struct mtd_info mtd; |
| struct nand_chip nand; |
| void __iomem *data_va; |
| void __iomem *cmd_va; |
| void __iomem *addr_va; |
| struct nand_bbt_descr *bbt_desc; |
| }; |
| |
| static struct nand_ecclayout nomadik_ecc_layout = { |
| .eccbytes = 3 * 4, |
| .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */ |
| 0x02, 0x03, 0x04, |
| 0x12, 0x13, 0x14, |
| 0x22, 0x23, 0x24, |
| 0x32, 0x33, 0x34}, |
| /* let's keep bytes 5,6,7 for us, just in case we change ECC algo */ |
| .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} }, |
| }; |
| |
| static void nomadik_ecc_control(struct mtd_info *mtd, int mode) |
| { |
| /* No need to enable hw ecc, it's on by default */ |
| } |
| |
| static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) |
| { |
| struct nand_chip *nand = mtd->priv; |
| struct nomadik_nand_host *host = nand->priv; |
| |
| if (cmd == NAND_CMD_NONE) |
| return; |
| |
| if (ctrl & NAND_CLE) |
| writeb(cmd, host->cmd_va); |
| else |
| writeb(cmd, host->addr_va); |
| } |
| |
| static int nomadik_nand_probe(struct platform_device *pdev) |
| { |
| struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data; |
| struct nomadik_nand_host *host; |
| struct mtd_info *mtd; |
| struct nand_chip *nand; |
| struct resource *res; |
| int ret = 0; |
| |
| /* Allocate memory for the device structure (and zero it) */ |
| host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL); |
| if (!host) { |
| dev_err(&pdev->dev, "Failed to allocate device structure.\n"); |
| return -ENOMEM; |
| } |
| |
| /* Call the client's init function, if any */ |
| if (pdata->init) |
| ret = pdata->init(); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Init function failed\n"); |
| goto err; |
| } |
| |
| /* ioremap three regions */ |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr"); |
| if (!res) { |
| ret = -EIO; |
| goto err_unmap; |
| } |
| host->addr_va = ioremap(res->start, resource_size(res)); |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); |
| if (!res) { |
| ret = -EIO; |
| goto err_unmap; |
| } |
| host->data_va = ioremap(res->start, resource_size(res)); |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd"); |
| if (!res) { |
| ret = -EIO; |
| goto err_unmap; |
| } |
| host->cmd_va = ioremap(res->start, resource_size(res)); |
| |
| if (!host->addr_va || !host->data_va || !host->cmd_va) { |
| ret = -ENOMEM; |
| goto err_unmap; |
| } |
| |
| /* Link all private pointers */ |
| mtd = &host->mtd; |
| nand = &host->nand; |
| mtd->priv = nand; |
| nand->priv = host; |
| |
| host->mtd.owner = THIS_MODULE; |
| nand->IO_ADDR_R = host->data_va; |
| nand->IO_ADDR_W = host->data_va; |
| nand->cmd_ctrl = nomadik_cmd_ctrl; |
| |
| /* |
| * This stanza declares ECC_HW but uses soft routines. It's because |
| * HW claims to make the calculation but not the correction. However, |
| * I haven't managed to get the desired data out of it until now. |
| */ |
| nand->ecc.mode = NAND_ECC_SOFT; |
| nand->ecc.layout = &nomadik_ecc_layout; |
| nand->ecc.hwctl = nomadik_ecc_control; |
| nand->ecc.size = 512; |
| nand->ecc.bytes = 3; |
| |
| nand->options = pdata->options; |
| |
| /* |
| * Scan to find existence of the device |
| */ |
| if (nand_scan(&host->mtd, 1)) { |
| ret = -ENXIO; |
| goto err_unmap; |
| } |
| |
| mtd_device_register(&host->mtd, pdata->parts, pdata->nparts); |
| |
| platform_set_drvdata(pdev, host); |
| return 0; |
| |
| err_unmap: |
| if (host->cmd_va) |
| iounmap(host->cmd_va); |
| if (host->data_va) |
| iounmap(host->data_va); |
| if (host->addr_va) |
| iounmap(host->addr_va); |
| err: |
| kfree(host); |
| return ret; |
| } |
| |
| /* |
| * Clean up routine |
| */ |
| static int nomadik_nand_remove(struct platform_device *pdev) |
| { |
| struct nomadik_nand_host *host = platform_get_drvdata(pdev); |
| struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data; |
| |
| if (pdata->exit) |
| pdata->exit(); |
| |
| if (host) { |
| nand_release(&host->mtd); |
| iounmap(host->cmd_va); |
| iounmap(host->data_va); |
| iounmap(host->addr_va); |
| kfree(host); |
| } |
| return 0; |
| } |
| |
| static int nomadik_nand_suspend(struct device *dev) |
| { |
| struct nomadik_nand_host *host = dev_get_drvdata(dev); |
| int ret = 0; |
| if (host) |
| ret = mtd_suspend(&host->mtd); |
| return ret; |
| } |
| |
| static int nomadik_nand_resume(struct device *dev) |
| { |
| struct nomadik_nand_host *host = dev_get_drvdata(dev); |
| if (host) |
| mtd_resume(&host->mtd); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops nomadik_nand_pm_ops = { |
| .suspend = nomadik_nand_suspend, |
| .resume = nomadik_nand_resume, |
| }; |
| |
| static struct platform_driver nomadik_nand_driver = { |
| .probe = nomadik_nand_probe, |
| .remove = nomadik_nand_remove, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "nomadik_nand", |
| .pm = &nomadik_nand_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(nomadik_nand_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)"); |
| MODULE_DESCRIPTION("NAND driver for Nomadik Platform"); |