ARM: LPAE: Add fault handling support
The DFSR and IFSR register format is different when LPAE is enabled. In
addition, DFSR and IFSR have similar definitions for the fault type.
This modifies the fault code to correctly handle the new format.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index c335c76..caf14dc 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -968,7 +968,7 @@
ai_usermode = safe_usermode(ai_usermode, false);
}
- hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+ hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN,
"alignment exception");
/*
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 2a02716..eb5520f 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -110,8 +110,10 @@
pte = pte_offset_map(pmd, addr);
printk(", *pte=%08llx", (long long)pte_val(*pte));
+#ifndef CONFIG_ARM_LPAE
printk(", *ppte=%08llx",
(long long)pte_val(pte[PTE_HWTABLE_PTRS]));
+#endif
pte_unmap(pte);
} while(0);
@@ -428,6 +430,12 @@
pmd = pmd_offset(pud, addr);
pmd_k = pmd_offset(pud_k, addr);
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Only one hardware entry per PMD with LPAE.
+ */
+ index = 0;
+#else
/*
* On ARM one Linux PGD entry contains two hardware entries (see page
* tables layout in pgtable.h). We normally guarantee that we always
@@ -437,6 +445,7 @@
* for the first of pair.
*/
index = (addr >> SECTION_SHIFT) & 1;
+#endif
if (pmd_none(pmd_k[index]))
goto bad_area;
@@ -484,7 +493,11 @@
};
/* FSR definition */
+#ifdef CONFIG_ARM_LPAE
+#include "fsr-3level.c"
+#else
#include "fsr-2level.c"
+#endif
void __init
hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
@@ -553,6 +566,7 @@
arm_notify_die("", regs, &info, ifsr, 0);
}
+#ifndef CONFIG_ARM_LPAE
static int __init exceptions_init(void)
{
if (cpu_architecture() >= CPU_ARCH_ARMv6) {
@@ -575,3 +589,4 @@
}
arch_initcall(exceptions_init);
+#endif
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 25b45c1..cf08bdf 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -8,11 +8,19 @@
#define FSR_WRITE (1 << 11)
#define FSR_FS4 (1 << 10)
#define FSR_FS3_0 (15)
+#define FSR_FS5_0 (0x3f)
+#ifdef CONFIG_ARM_LPAE
+static inline int fsr_fs(unsigned int fsr)
+{
+ return fsr & FSR_FS5_0;
+}
+#else
static inline int fsr_fs(unsigned int fsr)
{
return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
}
+#endif
void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
unsigned long search_exception_table(unsigned long addr);
diff --git a/arch/arm/mm/fsr-3level.c b/arch/arm/mm/fsr-3level.c
new file mode 100644
index 0000000..05a4e94
--- /dev/null
+++ b/arch/arm/mm/fsr-3level.c
@@ -0,0 +1,68 @@
+static struct fsr_info fsr_info[] = {
+ { do_bad, SIGBUS, 0, "unknown 0" },
+ { do_bad, SIGBUS, 0, "unknown 1" },
+ { do_bad, SIGBUS, 0, "unknown 2" },
+ { do_bad, SIGBUS, 0, "unknown 3" },
+ { do_bad, SIGBUS, 0, "reserved translation fault" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 1 translation fault" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 2 translation fault" },
+ { do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" },
+ { do_bad, SIGBUS, 0, "reserved access flag fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" },
+ { do_bad, SIGBUS, 0, "reserved permission fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" },
+ { do_sect_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 permission fault" },
+ { do_bad, SIGBUS, 0, "synchronous external abort" },
+ { do_bad, SIGBUS, 0, "asynchronous external abort" },
+ { do_bad, SIGBUS, 0, "unknown 18" },
+ { do_bad, SIGBUS, 0, "unknown 19" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous parity error" },
+ { do_bad, SIGBUS, 0, "asynchronous parity error" },
+ { do_bad, SIGBUS, 0, "unknown 26" },
+ { do_bad, SIGBUS, 0, "unknown 27" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "unknown 32" },
+ { do_bad, SIGBUS, BUS_ADRALN, "alignment fault" },
+ { do_bad, SIGBUS, 0, "debug event" },
+ { do_bad, SIGBUS, 0, "unknown 35" },
+ { do_bad, SIGBUS, 0, "unknown 36" },
+ { do_bad, SIGBUS, 0, "unknown 37" },
+ { do_bad, SIGBUS, 0, "unknown 38" },
+ { do_bad, SIGBUS, 0, "unknown 39" },
+ { do_bad, SIGBUS, 0, "unknown 40" },
+ { do_bad, SIGBUS, 0, "unknown 41" },
+ { do_bad, SIGBUS, 0, "unknown 42" },
+ { do_bad, SIGBUS, 0, "unknown 43" },
+ { do_bad, SIGBUS, 0, "unknown 44" },
+ { do_bad, SIGBUS, 0, "unknown 45" },
+ { do_bad, SIGBUS, 0, "unknown 46" },
+ { do_bad, SIGBUS, 0, "unknown 47" },
+ { do_bad, SIGBUS, 0, "unknown 48" },
+ { do_bad, SIGBUS, 0, "unknown 49" },
+ { do_bad, SIGBUS, 0, "unknown 50" },
+ { do_bad, SIGBUS, 0, "unknown 51" },
+ { do_bad, SIGBUS, 0, "implementation fault (lockdown abort)" },
+ { do_bad, SIGBUS, 0, "unknown 53" },
+ { do_bad, SIGBUS, 0, "unknown 54" },
+ { do_bad, SIGBUS, 0, "unknown 55" },
+ { do_bad, SIGBUS, 0, "unknown 56" },
+ { do_bad, SIGBUS, 0, "unknown 57" },
+ { do_bad, SIGBUS, 0, "implementation fault (coprocessor abort)" },
+ { do_bad, SIGBUS, 0, "unknown 59" },
+ { do_bad, SIGBUS, 0, "unknown 60" },
+ { do_bad, SIGBUS, 0, "unknown 61" },
+ { do_bad, SIGBUS, 0, "unknown 62" },
+ { do_bad, SIGBUS, 0, "unknown 63" },
+};
+
+#define ifsr_info fsr_info