| # x86 configuration |
| mainmenu "Linux Kernel Configuration for x86" |
| |
| # Select 32 or 64 bit |
| config 64BIT |
| bool "64-bit kernel" if ARCH = "x86" |
| default ARCH = "x86_64" |
| ---help--- |
| Say yes to build a 64-bit kernel - formerly known as x86_64 |
| Say no to build a 32-bit kernel - formerly known as i386 |
| |
| config X86_32 |
| def_bool !64BIT |
| |
| config X86_64 |
| def_bool 64BIT |
| |
| ### Arch settings |
| config X86 |
| def_bool y |
| select HAVE_AOUT if X86_32 |
| select HAVE_READQ |
| select HAVE_WRITEQ |
| select HAVE_UNSTABLE_SCHED_CLOCK |
| select HAVE_IDE |
| select HAVE_OPROFILE |
| select HAVE_PERF_EVENTS if (!M386 && !M486) |
| select HAVE_IOREMAP_PROT |
| select HAVE_KPROBES |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| select ARCH_WANT_FRAME_POINTERS |
| select HAVE_DMA_ATTRS |
| select HAVE_KRETPROBES |
| select HAVE_FTRACE_MCOUNT_RECORD |
| select HAVE_DYNAMIC_FTRACE |
| select HAVE_FUNCTION_TRACER |
| select HAVE_FUNCTION_GRAPH_TRACER |
| select HAVE_FUNCTION_GRAPH_FP_TEST |
| select HAVE_FUNCTION_TRACE_MCOUNT_TEST |
| select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE |
| select HAVE_SYSCALL_TRACEPOINTS |
| select HAVE_KVM |
| select HAVE_ARCH_KGDB |
| select HAVE_ARCH_TRACEHOOK |
| select HAVE_GENERIC_DMA_COHERENT if X86_32 |
| select HAVE_EFFICIENT_UNALIGNED_ACCESS |
| select USER_STACKTRACE_SUPPORT |
| select HAVE_REGS_AND_STACK_ACCESS_API |
| select HAVE_DMA_API_DEBUG |
| select HAVE_KERNEL_GZIP |
| select HAVE_KERNEL_BZIP2 |
| select HAVE_KERNEL_LZMA |
| select HAVE_HW_BREAKPOINT |
| select PERF_EVENTS |
| select ANON_INODES |
| select HAVE_ARCH_KMEMCHECK |
| select HAVE_USER_RETURN_NOTIFIER |
| |
| config OUTPUT_FORMAT |
| string |
| default "elf32-i386" if X86_32 |
| default "elf64-x86-64" if X86_64 |
| |
| config ARCH_DEFCONFIG |
| string |
| default "arch/x86/configs/i386_defconfig" if X86_32 |
| default "arch/x86/configs/x86_64_defconfig" if X86_64 |
| |
| config GENERIC_TIME |
| def_bool y |
| |
| config GENERIC_CMOS_UPDATE |
| def_bool y |
| |
| config CLOCKSOURCE_WATCHDOG |
| def_bool y |
| |
| config GENERIC_CLOCKEVENTS |
| def_bool y |
| |
| config GENERIC_CLOCKEVENTS_BROADCAST |
| def_bool y |
| depends on X86_64 || (X86_32 && X86_LOCAL_APIC) |
| |
| config LOCKDEP_SUPPORT |
| def_bool y |
| |
| config STACKTRACE_SUPPORT |
| def_bool y |
| |
| config HAVE_LATENCYTOP_SUPPORT |
| def_bool y |
| |
| config MMU |
| def_bool y |
| |
| config ZONE_DMA |
| def_bool y |
| |
| config SBUS |
| bool |
| |
| config GENERIC_ISA_DMA |
| def_bool y |
| |
| config GENERIC_IOMAP |
| def_bool y |
| |
| config GENERIC_BUG |
| def_bool y |
| depends on BUG |
| select GENERIC_BUG_RELATIVE_POINTERS if X86_64 |
| |
| config GENERIC_BUG_RELATIVE_POINTERS |
| bool |
| |
| config GENERIC_HWEIGHT |
| def_bool y |
| |
| config GENERIC_GPIO |
| bool |
| |
| config ARCH_MAY_HAVE_PC_FDC |
| def_bool y |
| |
| config RWSEM_GENERIC_SPINLOCK |
| def_bool !X86_XADD |
| |
| config RWSEM_XCHGADD_ALGORITHM |
| def_bool X86_XADD |
| |
| config ARCH_HAS_CPU_IDLE_WAIT |
| def_bool y |
| |
| config GENERIC_CALIBRATE_DELAY |
| def_bool y |
| |
| config GENERIC_TIME_VSYSCALL |
| bool |
| default X86_64 |
| |
| config ARCH_HAS_CPU_RELAX |
| def_bool y |
| |
| config ARCH_HAS_DEFAULT_IDLE |
| def_bool y |
| |
| config ARCH_HAS_CACHE_LINE_SIZE |
| def_bool y |
| |
| config HAVE_SETUP_PER_CPU_AREA |
| def_bool y |
| |
| config NEED_PER_CPU_EMBED_FIRST_CHUNK |
| def_bool y |
| |
| config NEED_PER_CPU_PAGE_FIRST_CHUNK |
| def_bool y |
| |
| config HAVE_CPUMASK_OF_CPU_MAP |
| def_bool X86_64_SMP |
| |
| config ARCH_HIBERNATION_POSSIBLE |
| def_bool y |
| |
| config ARCH_SUSPEND_POSSIBLE |
| def_bool y |
| |
| config ZONE_DMA32 |
| bool |
| default X86_64 |
| |
| config ARCH_POPULATES_NODE_MAP |
| def_bool y |
| |
| config AUDIT_ARCH |
| bool |
| default X86_64 |
| |
| config ARCH_SUPPORTS_OPTIMIZED_INLINING |
| def_bool y |
| |
| config ARCH_SUPPORTS_DEBUG_PAGEALLOC |
| def_bool y |
| |
| config HAVE_INTEL_TXT |
| def_bool y |
| depends on EXPERIMENTAL && DMAR && ACPI |
| |
| # Use the generic interrupt handling code in kernel/irq/: |
| config GENERIC_HARDIRQS |
| bool |
| default y |
| |
| config GENERIC_HARDIRQS_NO__DO_IRQ |
| def_bool y |
| |
| config GENERIC_IRQ_PROBE |
| bool |
| default y |
| |
| config GENERIC_PENDING_IRQ |
| bool |
| depends on GENERIC_HARDIRQS && SMP |
| default y |
| |
| config USE_GENERIC_SMP_HELPERS |
| def_bool y |
| depends on SMP |
| |
| config X86_32_SMP |
| def_bool y |
| depends on X86_32 && SMP |
| |
| config X86_64_SMP |
| def_bool y |
| depends on X86_64 && SMP |
| |
| config X86_HT |
| bool |
| depends on SMP |
| default y |
| |
| config X86_TRAMPOLINE |
| bool |
| depends on SMP || (64BIT && ACPI_SLEEP) |
| default y |
| |
| config X86_32_LAZY_GS |
| def_bool y |
| depends on X86_32 && !CC_STACKPROTECTOR |
| |
| config KTIME_SCALAR |
| def_bool X86_32 |
| source "init/Kconfig" |
| source "kernel/Kconfig.freezer" |
| |
| menu "Processor type and features" |
| |
| source "kernel/time/Kconfig" |
| |
| config SMP |
| bool "Symmetric multi-processing support" |
| ---help--- |
| This enables support for systems with more than one CPU. If you have |
| a system with only one CPU, like most personal computers, say N. If |
| you have a system with more than one CPU, say Y. |
| |
| If you say N here, the kernel will run on single and multiprocessor |
| machines, but will use only one CPU of a multiprocessor machine. If |
| you say Y here, the kernel will run on many, but not all, |
| singleprocessor machines. On a singleprocessor machine, the kernel |
| will run faster if you say N here. |
| |
| Note that if you say Y here and choose architecture "586" or |
| "Pentium" under "Processor family", the kernel will not work on 486 |
| architectures. Similarly, multiprocessor kernels for the "PPro" |
| architecture may not work on all Pentium based boards. |
| |
| People using multiprocessor machines who say Y here should also say |
| Y to "Enhanced Real Time Clock Support", below. The "Advanced Power |
| Management" code will be disabled if you say Y here. |
| |
| See also <file:Documentation/i386/IO-APIC.txt>, |
| <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
| <http://www.tldp.org/docs.html#howto>. |
| |
| If you don't know what to do here, say N. |
| |
| config X86_X2APIC |
| bool "Support x2apic" |
| depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP |
| ---help--- |
| This enables x2apic support on CPUs that have this feature. |
| |
| This allows 32-bit apic IDs (so it can support very large systems), |
| and accesses the local apic via MSRs not via mmio. |
| |
| If you don't know what to do here, say N. |
| |
| config SPARSE_IRQ |
| bool "Support sparse irq numbering" |
| depends on PCI_MSI || HT_IRQ |
| ---help--- |
| This enables support for sparse irqs. This is useful for distro |
| kernels that want to define a high CONFIG_NR_CPUS value but still |
| want to have low kernel memory footprint on smaller machines. |
| |
| ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread |
| out the irq_desc[] array in a more NUMA-friendly way. ) |
| |
| If you don't know what to do here, say N. |
| |
| config NUMA_IRQ_DESC |
| def_bool y |
| depends on SPARSE_IRQ && NUMA |
| |
| config X86_MPPARSE |
| bool "Enable MPS table" if ACPI |
| default y |
| depends on X86_LOCAL_APIC |
| ---help--- |
| For old smp systems that do not have proper acpi support. Newer systems |
| (esp with 64bit cpus) with acpi support, MADT and DSDT will override it |
| |
| config X86_BIGSMP |
| bool "Support for big SMP systems with more than 8 CPUs" |
| depends on X86_32 && SMP |
| ---help--- |
| This option is needed for the systems that have more than 8 CPUs |
| |
| if X86_32 |
| config X86_EXTENDED_PLATFORM |
| bool "Support for extended (non-PC) x86 platforms" |
| default y |
| ---help--- |
| If you disable this option then the kernel will only support |
| standard PC platforms. (which covers the vast majority of |
| systems out there.) |
| |
| If you enable this option then you'll be able to select support |
| for the following (non-PC) 32 bit x86 platforms: |
| AMD Elan |
| NUMAQ (IBM/Sequent) |
| RDC R-321x SoC |
| SGI 320/540 (Visual Workstation) |
| Summit/EXA (IBM x440) |
| Unisys ES7000 IA32 series |
| Moorestown MID devices |
| |
| If you have one of these systems, or if you want to build a |
| generic distribution kernel, say Y here - otherwise say N. |
| endif |
| |
| if X86_64 |
| config X86_EXTENDED_PLATFORM |
| bool "Support for extended (non-PC) x86 platforms" |
| default y |
| ---help--- |
| If you disable this option then the kernel will only support |
| standard PC platforms. (which covers the vast majority of |
| systems out there.) |
| |
| If you enable this option then you'll be able to select support |
| for the following (non-PC) 64 bit x86 platforms: |
| ScaleMP vSMP |
| SGI Ultraviolet |
| |
| If you have one of these systems, or if you want to build a |
| generic distribution kernel, say Y here - otherwise say N. |
| endif |
| # This is an alphabetically sorted list of 64 bit extended platforms |
| # Please maintain the alphabetic order if and when there are additions |
| |
| config X86_VSMP |
| bool "ScaleMP vSMP" |
| select PARAVIRT |
| depends on X86_64 && PCI |
| depends on X86_EXTENDED_PLATFORM |
| ---help--- |
| Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is |
| supposed to run on these EM64T-based machines. Only choose this option |
| if you have one of these machines. |
| |
| config X86_UV |
| bool "SGI Ultraviolet" |
| depends on X86_64 |
| depends on X86_EXTENDED_PLATFORM |
| depends on NUMA |
| depends on X86_X2APIC |
| ---help--- |
| This option is needed in order to support SGI Ultraviolet systems. |
| If you don't have one of these, you should say N here. |
| |
| # Following is an alphabetically sorted list of 32 bit extended platforms |
| # Please maintain the alphabetic order if and when there are additions |
| |
| config X86_ELAN |
| bool "AMD Elan" |
| depends on X86_32 |
| depends on X86_EXTENDED_PLATFORM |
| ---help--- |
| Select this for an AMD Elan processor. |
| |
| Do not use this option for K6/Athlon/Opteron processors! |
| |
| If unsure, choose "PC-compatible" instead. |
| |
| config X86_MRST |
| bool "Moorestown MID platform" |
| depends on X86_32 |
| depends on X86_EXTENDED_PLATFORM |
| ---help--- |
| Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin |
| Internet Device(MID) platform. Moorestown consists of two chips: |
| Lincroft (CPU core, graphics, and memory controller) and Langwell IOH. |
| Unlike standard x86 PCs, Moorestown does not have many legacy devices |
| nor standard legacy replacement devices/features. e.g. Moorestown does |
| not contain i8259, i8254, HPET, legacy BIOS, most of the io ports. |
| |
| config X86_RDC321X |
| bool "RDC R-321x SoC" |
| depends on X86_32 |
| depends on X86_EXTENDED_PLATFORM |
| select M486 |
| select X86_REBOOTFIXUPS |
| ---help--- |
| This option is needed for RDC R-321x system-on-chip, also known |
| as R-8610-(G). |
| If you don't have one of these chips, you should say N here. |
| |
| config X86_32_NON_STANDARD |
| bool "Support non-standard 32-bit SMP architectures" |
| depends on X86_32 && SMP |
| depends on X86_EXTENDED_PLATFORM |
| ---help--- |
| This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default |
| subarchitectures. It is intended for a generic binary kernel. |
| if you select them all, kernel will probe it one by one. and will |
| fallback to default. |
| |
| # Alphabetically sorted list of Non standard 32 bit platforms |
| |
| config X86_NUMAQ |
| bool "NUMAQ (IBM/Sequent)" |
| depends on X86_32_NON_STANDARD |
| select NUMA |
| select X86_MPPARSE |
| ---help--- |
| This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) |
| NUMA multiquad box. This changes the way that processors are |
| bootstrapped, and uses Clustered Logical APIC addressing mode instead |
| of Flat Logical. You will need a new lynxer.elf file to flash your |
| firmware with - send email to <Martin.Bligh@us.ibm.com>. |
| |
| config X86_SUPPORTS_MEMORY_FAILURE |
| bool |
| # MCE code calls memory_failure(): |
| depends on X86_MCE |
| # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: |
| depends on !X86_NUMAQ |
| # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: |
| depends on X86_64 || !SPARSEMEM |
| select ARCH_SUPPORTS_MEMORY_FAILURE |
| default y |
| |
| config X86_VISWS |
| bool "SGI 320/540 (Visual Workstation)" |
| depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT |
| depends on X86_32_NON_STANDARD |
| ---help--- |
| The SGI Visual Workstation series is an IA32-based workstation |
| based on SGI systems chips with some legacy PC hardware attached. |
| |
| Say Y here to create a kernel to run on the SGI 320 or 540. |
| |
| A kernel compiled for the Visual Workstation will run on general |
| PCs as well. See <file:Documentation/sgi-visws.txt> for details. |
| |
| config X86_SUMMIT |
| bool "Summit/EXA (IBM x440)" |
| depends on X86_32_NON_STANDARD |
| ---help--- |
| This option is needed for IBM systems that use the Summit/EXA chipset. |
| In particular, it is needed for the x440. |
| |
| config X86_ES7000 |
| bool "Unisys ES7000 IA32 series" |
| depends on X86_32_NON_STANDARD && X86_BIGSMP |
| ---help--- |
| Support for Unisys ES7000 systems. Say 'Y' here if this kernel is |
| supposed to run on an IA32-based Unisys ES7000 system. |
| |
| config SCHED_OMIT_FRAME_POINTER |
| def_bool y |
| prompt "Single-depth WCHAN output" |
| depends on X86 |
| ---help--- |
| Calculate simpler /proc/<PID>/wchan values. If this option |
| is disabled then wchan values will recurse back to the |
| caller function. This provides more accurate wchan values, |
| at the expense of slightly more scheduling overhead. |
| |
| If in doubt, say "Y". |
| |
| menuconfig PARAVIRT_GUEST |
| bool "Paravirtualized guest support" |
| ---help--- |
| Say Y here to get to see options related to running Linux under |
| various hypervisors. This option alone does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if PARAVIRT_GUEST |
| |
| source "arch/x86/xen/Kconfig" |
| |
| config VMI |
| bool "VMI Guest support (DEPRECATED)" |
| select PARAVIRT |
| depends on X86_32 |
| ---help--- |
| VMI provides a paravirtualized interface to the VMware ESX server |
| (it could be used by other hypervisors in theory too, but is not |
| at the moment), by linking the kernel to a GPL-ed ROM module |
| provided by the hypervisor. |
| |
| As of September 2009, VMware has started a phased retirement |
| of this feature from VMware's products. Please see |
| feature-removal-schedule.txt for details. If you are |
| planning to enable this option, please note that you cannot |
| live migrate a VMI enabled VM to a future VMware product, |
| which doesn't support VMI. So if you expect your kernel to |
| seamlessly migrate to newer VMware products, keep this |
| disabled. |
| |
| config KVM_CLOCK |
| bool "KVM paravirtualized clock" |
| select PARAVIRT |
| select PARAVIRT_CLOCK |
| ---help--- |
| Turning on this option will allow you to run a paravirtualized clock |
| when running over the KVM hypervisor. Instead of relying on a PIT |
| (or probably other) emulation by the underlying device model, the host |
| provides the guest with timing infrastructure such as time of day, and |
| system time |
| |
| config KVM_GUEST |
| bool "KVM Guest support" |
| select PARAVIRT |
| ---help--- |
| This option enables various optimizations for running under the KVM |
| hypervisor. |
| |
| source "arch/x86/lguest/Kconfig" |
| |
| config PARAVIRT |
| bool "Enable paravirtualization code" |
| ---help--- |
| This changes the kernel so it can modify itself when it is run |
| under a hypervisor, potentially improving performance significantly |
| over full virtualization. However, when run without a hypervisor |
| the kernel is theoretically slower and slightly larger. |
| |
| config PARAVIRT_SPINLOCKS |
| bool "Paravirtualization layer for spinlocks" |
| depends on PARAVIRT && SMP && EXPERIMENTAL |
| ---help--- |
| Paravirtualized spinlocks allow a pvops backend to replace the |
| spinlock implementation with something virtualization-friendly |
| (for example, block the virtual CPU rather than spinning). |
| |
| Unfortunately the downside is an up to 5% performance hit on |
| native kernels, with various workloads. |
| |
| If you are unsure how to answer this question, answer N. |
| |
| config PARAVIRT_CLOCK |
| bool |
| default n |
| |
| endif |
| |
| config PARAVIRT_DEBUG |
| bool "paravirt-ops debugging" |
| depends on PARAVIRT && DEBUG_KERNEL |
| ---help--- |
| Enable to debug paravirt_ops internals. Specifically, BUG if |
| a paravirt_op is missing when it is called. |
| |
| config MEMTEST |
| bool "Memtest" |
| ---help--- |
| This option adds a kernel parameter 'memtest', which allows memtest |
| to be set. |
| memtest=0, mean disabled; -- default |
| memtest=1, mean do 1 test pattern; |
| ... |
| memtest=4, mean do 4 test patterns. |
| If you are unsure how to answer this question, answer N. |
| |
| config X86_SUMMIT_NUMA |
| def_bool y |
| depends on X86_32 && NUMA && X86_32_NON_STANDARD |
| |
| config X86_CYCLONE_TIMER |
| def_bool y |
| depends on X86_32_NON_STANDARD |
| |
| source "arch/x86/Kconfig.cpu" |
| |
| config HPET_TIMER |
| def_bool X86_64 |
| prompt "HPET Timer Support" if X86_32 |
| ---help--- |
| Use the IA-PC HPET (High Precision Event Timer) to manage |
| time in preference to the PIT and RTC, if a HPET is |
| present. |
| HPET is the next generation timer replacing legacy 8254s. |
| The HPET provides a stable time base on SMP |
| systems, unlike the TSC, but it is more expensive to access, |
| as it is off-chip. You can find the HPET spec at |
| <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>. |
| |
| You can safely choose Y here. However, HPET will only be |
| activated if the platform and the BIOS support this feature. |
| Otherwise the 8254 will be used for timing services. |
| |
| Choose N to continue using the legacy 8254 timer. |
| |
| config HPET_EMULATE_RTC |
| def_bool y |
| depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) |
| |
| # Mark as embedded because too many people got it wrong. |
| # The code disables itself when not needed. |
| config DMI |
| default y |
| bool "Enable DMI scanning" if EMBEDDED |
| ---help--- |
| Enabled scanning of DMI to identify machine quirks. Say Y |
| here unless you have verified that your setup is not |
| affected by entries in the DMI blacklist. Required by PNP |
| BIOS code. |
| |
| config GART_IOMMU |
| bool "GART IOMMU support" if EMBEDDED |
| default y |
| select SWIOTLB |
| depends on X86_64 && PCI |
| ---help--- |
| Support for full DMA access of devices with 32bit memory access only |
| on systems with more than 3GB. This is usually needed for USB, |
| sound, many IDE/SATA chipsets and some other devices. |
| Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART |
| based hardware IOMMU and a software bounce buffer based IOMMU used |
| on Intel systems and as fallback. |
| The code is only active when needed (enough memory and limited |
| device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified |
| too. |
| |
| config CALGARY_IOMMU |
| bool "IBM Calgary IOMMU support" |
| select SWIOTLB |
| depends on X86_64 && PCI && EXPERIMENTAL |
| ---help--- |
| Support for hardware IOMMUs in IBM's xSeries x366 and x460 |
| systems. Needed to run systems with more than 3GB of memory |
| properly with 32-bit PCI devices that do not support DAC |
| (Double Address Cycle). Calgary also supports bus level |
| isolation, where all DMAs pass through the IOMMU. This |
| prevents them from going anywhere except their intended |
| destination. This catches hard-to-find kernel bugs and |
| mis-behaving drivers and devices that do not use the DMA-API |
| properly to set up their DMA buffers. The IOMMU can be |
| turned off at boot time with the iommu=off parameter. |
| Normally the kernel will make the right choice by itself. |
| If unsure, say Y. |
| |
| config CALGARY_IOMMU_ENABLED_BY_DEFAULT |
| def_bool y |
| prompt "Should Calgary be enabled by default?" |
| depends on CALGARY_IOMMU |
| ---help--- |
| Should Calgary be enabled by default? if you choose 'y', Calgary |
| will be used (if it exists). If you choose 'n', Calgary will not be |
| used even if it exists. If you choose 'n' and would like to use |
| Calgary anyway, pass 'iommu=calgary' on the kernel command line. |
| If unsure, say Y. |
| |
| config AMD_IOMMU |
| bool "AMD IOMMU support" |
| select SWIOTLB |
| select PCI_MSI |
| depends on X86_64 && PCI && ACPI |
| ---help--- |
| With this option you can enable support for AMD IOMMU hardware in |
| your system. An IOMMU is a hardware component which provides |
| remapping of DMA memory accesses from devices. With an AMD IOMMU you |
| can isolate the the DMA memory of different devices and protect the |
| system from misbehaving device drivers or hardware. |
| |
| You can find out if your system has an AMD IOMMU if you look into |
| your BIOS for an option to enable it or if you have an IVRS ACPI |
| table. |
| |
| config AMD_IOMMU_STATS |
| bool "Export AMD IOMMU statistics to debugfs" |
| depends on AMD_IOMMU |
| select DEBUG_FS |
| ---help--- |
| This option enables code in the AMD IOMMU driver to collect various |
| statistics about whats happening in the driver and exports that |
| information to userspace via debugfs. |
| If unsure, say N. |
| |
| # need this always selected by IOMMU for the VIA workaround |
| config SWIOTLB |
| def_bool y if X86_64 |
| ---help--- |
| Support for software bounce buffers used on x86-64 systems |
| which don't have a hardware IOMMU (e.g. the current generation |
| of Intel's x86-64 CPUs). Using this PCI devices which can only |
| access 32-bits of memory can be used on systems with more than |
| 3 GB of memory. If unsure, say Y. |
| |
| config IOMMU_HELPER |
| def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU) |
| |
| config IOMMU_API |
| def_bool (AMD_IOMMU || DMAR) |
| |
| config MAXSMP |
| bool "Configure Maximum number of SMP Processors and NUMA Nodes" |
| depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL |
| select CPUMASK_OFFSTACK |
| default n |
| ---help--- |
| Configure maximum number of CPUS and NUMA Nodes for this architecture. |
| If unsure, say N. |
| |
| config NR_CPUS |
| int "Maximum number of CPUs" if SMP && !MAXSMP |
| range 2 8 if SMP && X86_32 && !X86_BIGSMP |
| range 2 512 if SMP && !MAXSMP |
| default "1" if !SMP |
| default "4096" if MAXSMP |
| default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000) |
| default "8" if SMP |
| ---help--- |
| This allows you to specify the maximum number of CPUs which this |
| kernel will support. The maximum supported value is 512 and the |
| minimum value which makes sense is 2. |
| |
| This is purely to save memory - each supported CPU adds |
| approximately eight kilobytes to the kernel image. |
| |
| config SCHED_SMT |
| bool "SMT (Hyperthreading) scheduler support" |
| depends on X86_HT |
| ---help--- |
| SMT scheduler support improves the CPU scheduler's decision making |
| when dealing with Intel Pentium 4 chips with HyperThreading at a |
| cost of slightly increased overhead in some places. If unsure say |
| N here. |
| |
| config SCHED_MC |
| def_bool y |
| prompt "Multi-core scheduler support" |
| depends on X86_HT |
| ---help--- |
| Multi-core scheduler support improves the CPU scheduler's decision |
| making when dealing with multi-core CPU chips at a cost of slightly |
| increased overhead in some places. If unsure say N here. |
| |
| source "kernel/Kconfig.preempt" |
| |
| config X86_UP_APIC |
| bool "Local APIC support on uniprocessors" |
| depends on X86_32 && !SMP && !X86_32_NON_STANDARD |
| ---help--- |
| A local APIC (Advanced Programmable Interrupt Controller) is an |
| integrated interrupt controller in the CPU. If you have a single-CPU |
| system which has a processor with a local APIC, you can say Y here to |
| enable and use it. If you say Y here even though your machine doesn't |
| have a local APIC, then the kernel will still run with no slowdown at |
| all. The local APIC supports CPU-generated self-interrupts (timer, |
| performance counters), and the NMI watchdog which detects hard |
| lockups. |
| |
| config X86_UP_IOAPIC |
| bool "IO-APIC support on uniprocessors" |
| depends on X86_UP_APIC |
| ---help--- |
| An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an |
| SMP-capable replacement for PC-style interrupt controllers. Most |
| SMP systems and many recent uniprocessor systems have one. |
| |
| If you have a single-CPU system with an IO-APIC, you can say Y here |
| to use it. If you say Y here even though your machine doesn't have |
| an IO-APIC, then the kernel will still run with no slowdown at all. |
| |
| config X86_LOCAL_APIC |
| def_bool y |
| depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC |
| |
| config X86_IO_APIC |
| def_bool y |
| depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC |
| |
| config X86_VISWS_APIC |
| def_bool y |
| depends on X86_32 && X86_VISWS |
| |
| config X86_REROUTE_FOR_BROKEN_BOOT_IRQS |
| bool "Reroute for broken boot IRQs" |
| default n |
| depends on X86_IO_APIC |
| ---help--- |
| This option enables a workaround that fixes a source of |
| spurious interrupts. This is recommended when threaded |
| interrupt handling is used on systems where the generation of |
| superfluous "boot interrupts" cannot be disabled. |
| |
| Some chipsets generate a legacy INTx "boot IRQ" when the IRQ |
| entry in the chipset's IO-APIC is masked (as, e.g. the RT |
| kernel does during interrupt handling). On chipsets where this |
| boot IRQ generation cannot be disabled, this workaround keeps |
| the original IRQ line masked so that only the equivalent "boot |
| IRQ" is delivered to the CPUs. The workaround also tells the |
| kernel to set up the IRQ handler on the boot IRQ line. In this |
| way only one interrupt is delivered to the kernel. Otherwise |
| the spurious second interrupt may cause the kernel to bring |
| down (vital) interrupt lines. |
| |
| Only affects "broken" chipsets. Interrupt sharing may be |
| increased on these systems. |
| |
| config X86_MCE |
| bool "Machine Check / overheating reporting" |
| ---help--- |
| Machine Check support allows the processor to notify the |
| kernel if it detects a problem (e.g. overheating, data corruption). |
| The action the kernel takes depends on the severity of the problem, |
| ranging from warning messages to halting the machine. |
| |
| config X86_MCE_INTEL |
| def_bool y |
| prompt "Intel MCE features" |
| depends on X86_MCE && X86_LOCAL_APIC |
| ---help--- |
| Additional support for intel specific MCE features such as |
| the thermal monitor. |
| |
| config X86_MCE_AMD |
| def_bool y |
| prompt "AMD MCE features" |
| depends on X86_MCE && X86_LOCAL_APIC |
| ---help--- |
| Additional support for AMD specific MCE features such as |
| the DRAM Error Threshold. |
| |
| config X86_ANCIENT_MCE |
| def_bool n |
| depends on X86_32 && X86_MCE |
| prompt "Support for old Pentium 5 / WinChip machine checks" |
| ---help--- |
| Include support for machine check handling on old Pentium 5 or WinChip |
| systems. These typically need to be enabled explicitely on the command |
| line. |
| |
| config X86_MCE_THRESHOLD |
| depends on X86_MCE_AMD || X86_MCE_INTEL |
| bool |
| default y |
| |
| config X86_MCE_INJECT |
| depends on X86_MCE |
| tristate "Machine check injector support" |
| ---help--- |
| Provide support for injecting machine checks for testing purposes. |
| If you don't know what a machine check is and you don't do kernel |
| QA it is safe to say n. |
| |
| config X86_THERMAL_VECTOR |
| def_bool y |
| depends on X86_MCE_INTEL |
| |
| config VM86 |
| bool "Enable VM86 support" if EMBEDDED |
| default y |
| depends on X86_32 |
| ---help--- |
| This option is required by programs like DOSEMU to run 16-bit legacy |
| code on X86 processors. It also may be needed by software like |
| XFree86 to initialize some video cards via BIOS. Disabling this |
| option saves about 6k. |
| |
| config TOSHIBA |
| tristate "Toshiba Laptop support" |
| depends on X86_32 |
| ---help--- |
| This adds a driver to safely access the System Management Mode of |
| the CPU on Toshiba portables with a genuine Toshiba BIOS. It does |
| not work on models with a Phoenix BIOS. The System Management Mode |
| is used to set the BIOS and power saving options on Toshiba portables. |
| |
| For information on utilities to make use of this driver see the |
| Toshiba Linux utilities web site at: |
| <http://www.buzzard.org.uk/toshiba/>. |
| |
| Say Y if you intend to run this kernel on a Toshiba portable. |
| Say N otherwise. |
| |
| config I8K |
| tristate "Dell laptop support" |
| ---help--- |
| This adds a driver to safely access the System Management Mode |
| of the CPU on the Dell Inspiron 8000. The System Management Mode |
| is used to read cpu temperature and cooling fan status and to |
| control the fans on the I8K portables. |
| |
| This driver has been tested only on the Inspiron 8000 but it may |
| also work with other Dell laptops. You can force loading on other |
| models by passing the parameter `force=1' to the module. Use at |
| your own risk. |
| |
| For information on utilities to make use of this driver see the |
| I8K Linux utilities web site at: |
| <http://people.debian.org/~dz/i8k/> |
| |
| Say Y if you intend to run this kernel on a Dell Inspiron 8000. |
| Say N otherwise. |
| |
| config X86_REBOOTFIXUPS |
| bool "Enable X86 board specific fixups for reboot" |
| depends on X86_32 |
| ---help--- |
| This enables chipset and/or board specific fixups to be done |
| in order to get reboot to work correctly. This is only needed on |
| some combinations of hardware and BIOS. The symptom, for which |
| this config is intended, is when reboot ends with a stalled/hung |
| system. |
| |
| Currently, the only fixup is for the Geode machines using |
| CS5530A and CS5536 chipsets and the RDC R-321x SoC. |
| |
| Say Y if you want to enable the fixup. Currently, it's safe to |
| enable this option even if you don't need it. |
| Say N otherwise. |
| |
| config MICROCODE |
| tristate "/dev/cpu/microcode - microcode support" |
| select FW_LOADER |
| ---help--- |
| If you say Y here, you will be able to update the microcode on |
| certain Intel and AMD processors. The Intel support is for the |
| IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, |
| Pentium 4, Xeon etc. The AMD support is for family 0x10 and |
| 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra. |
| You will obviously need the actual microcode binary data itself |
| which is not shipped with the Linux kernel. |
| |
| This option selects the general module only, you need to select |
| at least one vendor specific module as well. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called microcode. |
| |
| config MICROCODE_INTEL |
| bool "Intel microcode patch loading support" |
| depends on MICROCODE |
| default MICROCODE |
| select FW_LOADER |
| ---help--- |
| This options enables microcode patch loading support for Intel |
| processors. |
| |
| For latest news and information on obtaining all the required |
| Intel ingredients for this driver, check: |
| <http://www.urbanmyth.org/microcode/>. |
| |
| config MICROCODE_AMD |
| bool "AMD microcode patch loading support" |
| depends on MICROCODE |
| select FW_LOADER |
| ---help--- |
| If you select this option, microcode patch loading support for AMD |
| processors will be enabled. |
| |
| config MICROCODE_OLD_INTERFACE |
| def_bool y |
| depends on MICROCODE |
| |
| config X86_MSR |
| tristate "/dev/cpu/*/msr - Model-specific register support" |
| ---help--- |
| This device gives privileged processes access to the x86 |
| Model-Specific Registers (MSRs). It is a character device with |
| major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. |
| MSR accesses are directed to a specific CPU on multi-processor |
| systems. |
| |
| config X86_CPUID |
| tristate "/dev/cpu/*/cpuid - CPU information support" |
| ---help--- |
| This device gives processes access to the x86 CPUID instruction to |
| be executed on a specific processor. It is a character device |
| with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to |
| /dev/cpu/31/cpuid. |
| |
| config X86_CPU_DEBUG |
| tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support" |
| ---help--- |
| If you select this option, this will provide various x86 CPUs |
| information through debugfs. |
| |
| choice |
| prompt "High Memory Support" |
| default HIGHMEM4G if !X86_NUMAQ |
| default HIGHMEM64G if X86_NUMAQ |
| depends on X86_32 |
| |
| config NOHIGHMEM |
| bool "off" |
| depends on !X86_NUMAQ |
| ---help--- |
| Linux can use up to 64 Gigabytes of physical memory on x86 systems. |
| However, the address space of 32-bit x86 processors is only 4 |
| Gigabytes large. That means that, if you have a large amount of |
| physical memory, not all of it can be "permanently mapped" by the |
| kernel. The physical memory that's not permanently mapped is called |
| "high memory". |
| |
| If you are compiling a kernel which will never run on a machine with |
| more than 1 Gigabyte total physical RAM, answer "off" here (default |
| choice and suitable for most users). This will result in a "3GB/1GB" |
| split: 3GB are mapped so that each process sees a 3GB virtual memory |
| space and the remaining part of the 4GB virtual memory space is used |
| by the kernel to permanently map as much physical memory as |
| possible. |
| |
| If the machine has between 1 and 4 Gigabytes physical RAM, then |
| answer "4GB" here. |
| |
| If more than 4 Gigabytes is used then answer "64GB" here. This |
| selection turns Intel PAE (Physical Address Extension) mode on. |
| PAE implements 3-level paging on IA32 processors. PAE is fully |
| supported by Linux, PAE mode is implemented on all recent Intel |
| processors (Pentium Pro and better). NOTE: If you say "64GB" here, |
| then the kernel will not boot on CPUs that don't support PAE! |
| |
| The actual amount of total physical memory will either be |
| auto detected or can be forced by using a kernel command line option |
| such as "mem=256M". (Try "man bootparam" or see the documentation of |
| your boot loader (lilo or loadlin) about how to pass options to the |
| kernel at boot time.) |
| |
| If unsure, say "off". |
| |
| config HIGHMEM4G |
| bool "4GB" |
| depends on !X86_NUMAQ |
| ---help--- |
| Select this if you have a 32-bit processor and between 1 and 4 |
| gigabytes of physical RAM. |
| |
| config HIGHMEM64G |
| bool "64GB" |
| depends on !M386 && !M486 |
| select X86_PAE |
| ---help--- |
| Select this if you have a 32-bit processor and more than 4 |
| gigabytes of physical RAM. |
| |
| endchoice |
| |
| choice |
| depends on EXPERIMENTAL |
| prompt "Memory split" if EMBEDDED |
| default VMSPLIT_3G |
| depends on X86_32 |
| ---help--- |
| Select the desired split between kernel and user memory. |
| |
| If the address range available to the kernel is less than the |
| physical memory installed, the remaining memory will be available |
| as "high memory". Accessing high memory is a little more costly |
| than low memory, as it needs to be mapped into the kernel first. |
| Note that increasing the kernel address space limits the range |
| available to user programs, making the address space there |
| tighter. Selecting anything other than the default 3G/1G split |
| will also likely make your kernel incompatible with binary-only |
| kernel modules. |
| |
| If you are not absolutely sure what you are doing, leave this |
| option alone! |
| |
| config VMSPLIT_3G |
| bool "3G/1G user/kernel split" |
| config VMSPLIT_3G_OPT |
| depends on !X86_PAE |
| bool "3G/1G user/kernel split (for full 1G low memory)" |
| config VMSPLIT_2G |
| bool "2G/2G user/kernel split" |
| config VMSPLIT_2G_OPT |
| depends on !X86_PAE |
| bool "2G/2G user/kernel split (for full 2G low memory)" |
| config VMSPLIT_1G |
| bool "1G/3G user/kernel split" |
| endchoice |
| |
| config PAGE_OFFSET |
| hex |
| default 0xB0000000 if VMSPLIT_3G_OPT |
| default 0x80000000 if VMSPLIT_2G |
| default 0x78000000 if VMSPLIT_2G_OPT |
| default 0x40000000 if VMSPLIT_1G |
| default 0xC0000000 |
| depends on X86_32 |
| |
| config HIGHMEM |
| def_bool y |
| depends on X86_32 && (HIGHMEM64G || HIGHMEM4G) |
| |
| config X86_PAE |
| bool "PAE (Physical Address Extension) Support" |
| depends on X86_32 && !HIGHMEM4G |
| ---help--- |
| PAE is required for NX support, and furthermore enables |
| larger swapspace support for non-overcommit purposes. It |
| has the cost of more pagetable lookup overhead, and also |
| consumes more pagetable space per process. |
| |
| config ARCH_PHYS_ADDR_T_64BIT |
| def_bool X86_64 || X86_PAE |
| |
| config DIRECT_GBPAGES |
| bool "Enable 1GB pages for kernel pagetables" if EMBEDDED |
| default y |
| depends on X86_64 |
| ---help--- |
| Allow the kernel linear mapping to use 1GB pages on CPUs that |
| support it. This can improve the kernel's performance a tiny bit by |
| reducing TLB pressure. If in doubt, say "Y". |
| |
| # Common NUMA Features |
| config NUMA |
| bool "Numa Memory Allocation and Scheduler Support" |
| depends on SMP |
| depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL) |
| default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) |
| ---help--- |
| Enable NUMA (Non Uniform Memory Access) support. |
| |
| The kernel will try to allocate memory used by a CPU on the |
| local memory controller of the CPU and add some more |
| NUMA awareness to the kernel. |
| |
| For 64-bit this is recommended if the system is Intel Core i7 |
| (or later), AMD Opteron, or EM64T NUMA. |
| |
| For 32-bit this is only needed on (rare) 32-bit-only platforms |
| that support NUMA topologies, such as NUMAQ / Summit, or if you |
| boot a 32-bit kernel on a 64-bit NUMA platform. |
| |
| Otherwise, you should say N. |
| |
| comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" |
| depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) |
| |
| config K8_NUMA |
| def_bool y |
| prompt "Old style AMD Opteron NUMA detection" |
| depends on X86_64 && NUMA && PCI |
| ---help--- |
| Enable K8 NUMA node topology detection. You should say Y here if |
| you have a multi processor AMD K8 system. This uses an old |
| method to read the NUMA configuration directly from the builtin |
| Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA |
| instead, which also takes priority if both are compiled in. |
| |
| config X86_64_ACPI_NUMA |
| def_bool y |
| prompt "ACPI NUMA detection" |
| depends on X86_64 && NUMA && ACPI && PCI |
| select ACPI_NUMA |
| ---help--- |
| Enable ACPI SRAT based node topology detection. |
| |
| # Some NUMA nodes have memory ranges that span |
| # other nodes. Even though a pfn is valid and |
| # between a node's start and end pfns, it may not |
| # reside on that node. See memmap_init_zone() |
| # for details. |
| config NODES_SPAN_OTHER_NODES |
| def_bool y |
| depends on X86_64_ACPI_NUMA |
| |
| config NUMA_EMU |
| bool "NUMA emulation" |
| depends on X86_64 && NUMA |
| ---help--- |
| Enable NUMA emulation. A flat machine will be split |
| into virtual nodes when booted with "numa=fake=N", where N is the |
| number of nodes. This is only useful for debugging. |
| |
| config NODES_SHIFT |
| int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP |
| range 1 9 |
| default "9" if MAXSMP |
| default "6" if X86_64 |
| default "4" if X86_NUMAQ |
| default "3" |
| depends on NEED_MULTIPLE_NODES |
| ---help--- |
| Specify the maximum number of NUMA Nodes available on the target |
| system. Increases memory reserved to accommodate various tables. |
| |
| config HAVE_ARCH_BOOTMEM |
| def_bool y |
| depends on X86_32 && NUMA |
| |
| config ARCH_HAVE_MEMORY_PRESENT |
| def_bool y |
| depends on X86_32 && DISCONTIGMEM |
| |
| config NEED_NODE_MEMMAP_SIZE |
| def_bool y |
| depends on X86_32 && (DISCONTIGMEM || SPARSEMEM) |
| |
| config HAVE_ARCH_ALLOC_REMAP |
| def_bool y |
| depends on X86_32 && NUMA |
| |
| config ARCH_FLATMEM_ENABLE |
| def_bool y |
| depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA |
| |
| config ARCH_DISCONTIGMEM_ENABLE |
| def_bool y |
| depends on NUMA && X86_32 |
| |
| config ARCH_DISCONTIGMEM_DEFAULT |
| def_bool y |
| depends on NUMA && X86_32 |
| |
| config ARCH_PROC_KCORE_TEXT |
| def_bool y |
| depends on X86_64 && PROC_KCORE |
| |
| config ARCH_SPARSEMEM_DEFAULT |
| def_bool y |
| depends on X86_64 |
| |
| config ARCH_SPARSEMEM_ENABLE |
| def_bool y |
| depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD |
| select SPARSEMEM_STATIC if X86_32 |
| select SPARSEMEM_VMEMMAP_ENABLE if X86_64 |
| |
| config ARCH_SELECT_MEMORY_MODEL |
| def_bool y |
| depends on ARCH_SPARSEMEM_ENABLE |
| |
| config ARCH_MEMORY_PROBE |
| def_bool X86_64 |
| depends on MEMORY_HOTPLUG |
| |
| source "mm/Kconfig" |
| |
| config HIGHPTE |
| bool "Allocate 3rd-level pagetables from highmem" |
| depends on X86_32 && (HIGHMEM4G || HIGHMEM64G) |
| ---help--- |
| The VM uses one page table entry for each page of physical memory. |
| For systems with a lot of RAM, this can be wasteful of precious |
| low memory. Setting this option will put user-space page table |
| entries in high memory. |
| |
| config X86_CHECK_BIOS_CORRUPTION |
| bool "Check for low memory corruption" |
| ---help--- |
| Periodically check for memory corruption in low memory, which |
| is suspected to be caused by BIOS. Even when enabled in the |
| configuration, it is disabled at runtime. Enable it by |
| setting "memory_corruption_check=1" on the kernel command |
| line. By default it scans the low 64k of memory every 60 |
| seconds; see the memory_corruption_check_size and |
| memory_corruption_check_period parameters in |
| Documentation/kernel-parameters.txt to adjust this. |
| |
| When enabled with the default parameters, this option has |
| almost no overhead, as it reserves a relatively small amount |
| of memory and scans it infrequently. It both detects corruption |
| and prevents it from affecting the running system. |
| |
| It is, however, intended as a diagnostic tool; if repeatable |
| BIOS-originated corruption always affects the same memory, |
| you can use memmap= to prevent the kernel from using that |
| memory. |
| |
| config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK |
| bool "Set the default setting of memory_corruption_check" |
| depends on X86_CHECK_BIOS_CORRUPTION |
| default y |
| ---help--- |
| Set whether the default state of memory_corruption_check is |
| on or off. |
| |
| config X86_RESERVE_LOW_64K |
| bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen" |
| default y |
| ---help--- |
| Reserve the first 64K of physical RAM on BIOSes that are known |
| to potentially corrupt that memory range. A numbers of BIOSes are |
| known to utilize this area during suspend/resume, so it must not |
| be used by the kernel. |
| |
| Set this to N if you are absolutely sure that you trust the BIOS |
| to get all its memory reservations and usages right. |
| |
| If you have doubts about the BIOS (e.g. suspend/resume does not |
| work or there's kernel crashes after certain hardware hotplug |
| events) and it's not AMI or Phoenix, then you might want to enable |
| X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical |
| corruption patterns. |
| |
| Say Y if unsure. |
| |
| config MATH_EMULATION |
| bool |
| prompt "Math emulation" if X86_32 |
| ---help--- |
| Linux can emulate a math coprocessor (used for floating point |
| operations) if you don't have one. 486DX and Pentium processors have |
| a math coprocessor built in, 486SX and 386 do not, unless you added |
| a 487DX or 387, respectively. (The messages during boot time can |
| give you some hints here ["man dmesg"].) Everyone needs either a |
| coprocessor or this emulation. |
| |
| If you don't have a math coprocessor, you need to say Y here; if you |
| say Y here even though you have a coprocessor, the coprocessor will |
| be used nevertheless. (This behavior can be changed with the kernel |
| command line option "no387", which comes handy if your coprocessor |
| is broken. Try "man bootparam" or see the documentation of your boot |
| loader (lilo or loadlin) about how to pass options to the kernel at |
| boot time.) This means that it is a good idea to say Y here if you |
| intend to use this kernel on different machines. |
| |
| More information about the internals of the Linux math coprocessor |
| emulation can be found in <file:arch/x86/math-emu/README>. |
| |
| If you are not sure, say Y; apart from resulting in a 66 KB bigger |
| kernel, it won't hurt. |
| |
| config MTRR |
| bool |
| default y |
| prompt "MTRR (Memory Type Range Register) support" if EMBEDDED |
| ---help--- |
| On Intel P6 family processors (Pentium Pro, Pentium II and later) |
| the Memory Type Range Registers (MTRRs) may be used to control |
| processor access to memory ranges. This is most useful if you have |
| a video (VGA) card on a PCI or AGP bus. Enabling write-combining |
| allows bus write transfers to be combined into a larger transfer |
| before bursting over the PCI/AGP bus. This can increase performance |
| of image write operations 2.5 times or more. Saying Y here creates a |
| /proc/mtrr file which may be used to manipulate your processor's |
| MTRRs. Typically the X server should use this. |
| |
| This code has a reasonably generic interface so that similar |
| control registers on other processors can be easily supported |
| as well: |
| |
| The Cyrix 6x86, 6x86MX and M II processors have Address Range |
| Registers (ARRs) which provide a similar functionality to MTRRs. For |
| these, the ARRs are used to emulate the MTRRs. |
| The AMD K6-2 (stepping 8 and above) and K6-3 processors have two |
| MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing |
| write-combining. All of these processors are supported by this code |
| and it makes sense to say Y here if you have one of them. |
| |
| Saying Y here also fixes a problem with buggy SMP BIOSes which only |
| set the MTRRs for the boot CPU and not for the secondary CPUs. This |
| can lead to all sorts of problems, so it's good to say Y here. |
| |
| You can safely say Y even if your machine doesn't have MTRRs, you'll |
| just add about 9 KB to your kernel. |
| |
| See <file:Documentation/x86/mtrr.txt> for more information. |
| |
| config MTRR_SANITIZER |
| def_bool y |
| prompt "MTRR cleanup support" |
| depends on MTRR |
| ---help--- |
| Convert MTRR layout from continuous to discrete, so X drivers can |
| add writeback entries. |
| |
| Can be disabled with disable_mtrr_cleanup on the kernel command line. |
| The largest mtrr entry size for a continuous block can be set with |
| mtrr_chunk_size. |
| |
| If unsure, say Y. |
| |
| config MTRR_SANITIZER_ENABLE_DEFAULT |
| int "MTRR cleanup enable value (0-1)" |
| range 0 1 |
| default "0" |
| depends on MTRR_SANITIZER |
| ---help--- |
| Enable mtrr cleanup default value |
| |
| config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT |
| int "MTRR cleanup spare reg num (0-7)" |
| range 0 7 |
| default "1" |
| depends on MTRR_SANITIZER |
| ---help--- |
| mtrr cleanup spare entries default, it can be changed via |
| mtrr_spare_reg_nr=N on the kernel command line. |
| |
| config X86_PAT |
| bool |
| default y |
| prompt "x86 PAT support" if EMBEDDED |
| depends on MTRR |
| ---help--- |
| Use PAT attributes to setup page level cache control. |
| |
| PATs are the modern equivalents of MTRRs and are much more |
| flexible than MTRRs. |
| |
| Say N here if you see bootup problems (boot crash, boot hang, |
| spontaneous reboots) or a non-working video driver. |
| |
| If unsure, say Y. |
| |
| config ARCH_USES_PG_UNCACHED |
| def_bool y |
| depends on X86_PAT |
| |
| config EFI |
| bool "EFI runtime service support" |
| depends on ACPI |
| ---help--- |
| This enables the kernel to use EFI runtime services that are |
| available (such as the EFI variable services). |
| |
| This option is only useful on systems that have EFI firmware. |
| In addition, you should use the latest ELILO loader available |
| at <http://elilo.sourceforge.net> in order to take advantage |
| of EFI runtime services. However, even with this option, the |
| resultant kernel should continue to boot on existing non-EFI |
| platforms. |
| |
| config SECCOMP |
| def_bool y |
| prompt "Enable seccomp to safely compute untrusted bytecode" |
| ---help--- |
| This kernel feature is useful for number crunching applications |
| that may need to compute untrusted bytecode during their |
| execution. By using pipes or other transports made available to |
| the process as file descriptors supporting the read/write |
| syscalls, it's possible to isolate those applications in |
| their own address space using seccomp. Once seccomp is |
| enabled via prctl(PR_SET_SECCOMP), it cannot be disabled |
| and the task is only allowed to execute a few safe syscalls |
| defined by each seccomp mode. |
| |
| If unsure, say Y. Only embedded should say N here. |
| |
| config CC_STACKPROTECTOR |
| bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" |
| ---help--- |
| This option turns on the -fstack-protector GCC feature. This |
| feature puts, at the beginning of functions, a canary value on |
| the stack just before the return address, and validates |
| the value just before actually returning. Stack based buffer |
| overflows (that need to overwrite this return address) now also |
| overwrite the canary, which gets detected and the attack is then |
| neutralized via a kernel panic. |
| |
| This feature requires gcc version 4.2 or above, or a distribution |
| gcc with the feature backported. Older versions are automatically |
| detected and for those versions, this configuration option is |
| ignored. (and a warning is printed during bootup) |
| |
| source kernel/Kconfig.hz |
| |
| config KEXEC |
| bool "kexec system call" |
| ---help--- |
| kexec is a system call that implements the ability to shutdown your |
| current kernel, and to start another kernel. It is like a reboot |
| but it is independent of the system firmware. And like a reboot |
| you can start any kernel with it, not just Linux. |
| |
| The name comes from the similarity to the exec system call. |
| |
| It is an ongoing process to be certain the hardware in a machine |
| is properly shutdown, so do not be surprised if this code does not |
| initially work for you. It may help to enable device hotplugging |
| support. As of this writing the exact hardware interface is |
| strongly in flux, so no good recommendation can be made. |
| |
| config CRASH_DUMP |
| bool "kernel crash dumps" |
| depends on X86_64 || (X86_32 && HIGHMEM) |
| ---help--- |
| Generate crash dump after being started by kexec. |
| This should be normally only set in special crash dump kernels |
| which are loaded in the main kernel with kexec-tools into |
| a specially reserved region and then later executed after |
| a crash by kdump/kexec. The crash dump kernel must be compiled |
| to a memory address not used by the main kernel or BIOS using |
| PHYSICAL_START, or it must be built as a relocatable image |
| (CONFIG_RELOCATABLE=y). |
| For more details see Documentation/kdump/kdump.txt |
| |
| config KEXEC_JUMP |
| bool "kexec jump (EXPERIMENTAL)" |
| depends on EXPERIMENTAL |
| depends on KEXEC && HIBERNATION |
| ---help--- |
| Jump between original kernel and kexeced kernel and invoke |
| code in physical address mode via KEXEC |
| |
| config PHYSICAL_START |
| hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) |
| default "0x1000000" |
| ---help--- |
| This gives the physical address where the kernel is loaded. |
| |
| If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then |
| bzImage will decompress itself to above physical address and |
| run from there. Otherwise, bzImage will run from the address where |
| it has been loaded by the boot loader and will ignore above physical |
| address. |
| |
| In normal kdump cases one does not have to set/change this option |
| as now bzImage can be compiled as a completely relocatable image |
| (CONFIG_RELOCATABLE=y) and be used to load and run from a different |
| address. This option is mainly useful for the folks who don't want |
| to use a bzImage for capturing the crash dump and want to use a |
| vmlinux instead. vmlinux is not relocatable hence a kernel needs |
| to be specifically compiled to run from a specific memory area |
| (normally a reserved region) and this option comes handy. |
| |
| So if you are using bzImage for capturing the crash dump, |
| leave the value here unchanged to 0x1000000 and set |
| CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux |
| for capturing the crash dump change this value to start of |
| the reserved region. In other words, it can be set based on |
| the "X" value as specified in the "crashkernel=YM@XM" |
| command line boot parameter passed to the panic-ed |
| kernel. Please take a look at Documentation/kdump/kdump.txt |
| for more details about crash dumps. |
| |
| Usage of bzImage for capturing the crash dump is recommended as |
| one does not have to build two kernels. Same kernel can be used |
| as production kernel and capture kernel. Above option should have |
| gone away after relocatable bzImage support is introduced. But it |
| is present because there are users out there who continue to use |
| vmlinux for dump capture. This option should go away down the |
| line. |
| |
| Don't change this unless you know what you are doing. |
| |
| config RELOCATABLE |
| bool "Build a relocatable kernel" |
| default y |
| ---help--- |
| This builds a kernel image that retains relocation information |
| so it can be loaded someplace besides the default 1MB. |
| The relocations tend to make the kernel binary about 10% larger, |
| but are discarded at runtime. |
| |
| One use is for the kexec on panic case where the recovery kernel |
| must live at a different physical address than the primary |
| kernel. |
| |
| Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address |
| it has been loaded at and the compile time physical address |
| (CONFIG_PHYSICAL_START) is ignored. |
| |
| # Relocation on x86-32 needs some additional build support |
| config X86_NEED_RELOCS |
| def_bool y |
| depends on X86_32 && RELOCATABLE |
| |
| config PHYSICAL_ALIGN |
| hex |
| prompt "Alignment value to which kernel should be aligned" if X86_32 |
| default "0x1000000" |
| range 0x2000 0x1000000 |
| ---help--- |
| This value puts the alignment restrictions on physical address |
| where kernel is loaded and run from. Kernel is compiled for an |
| address which meets above alignment restriction. |
| |
| If bootloader loads the kernel at a non-aligned address and |
| CONFIG_RELOCATABLE is set, kernel will move itself to nearest |
| address aligned to above value and run from there. |
| |
| If bootloader loads the kernel at a non-aligned address and |
| CONFIG_RELOCATABLE is not set, kernel will ignore the run time |
| load address and decompress itself to the address it has been |
| compiled for and run from there. The address for which kernel is |
| compiled already meets above alignment restrictions. Hence the |
| end result is that kernel runs from a physical address meeting |
| above alignment restrictions. |
| |
| Don't change this unless you know what you are doing. |
| |
| config HOTPLUG_CPU |
| bool "Support for hot-pluggable CPUs" |
| depends on SMP && HOTPLUG |
| ---help--- |
| Say Y here to allow turning CPUs off and on. CPUs can be |
| controlled through /sys/devices/system/cpu. |
| ( Note: power management support will enable this option |
| automatically on SMP systems. ) |
| Say N if you want to disable CPU hotplug. |
| |
| config COMPAT_VDSO |
| def_bool y |
| prompt "Compat VDSO support" |
| depends on X86_32 || IA32_EMULATION |
| ---help--- |
| Map the 32-bit VDSO to the predictable old-style address too. |
| |
| Say N here if you are running a sufficiently recent glibc |
| version (2.3.3 or later), to remove the high-mapped |
| VDSO mapping and to exclusively use the randomized VDSO. |
| |
| If unsure, say Y. |
| |
| config CMDLINE_BOOL |
| bool "Built-in kernel command line" |
| default n |
| ---help--- |
| Allow for specifying boot arguments to the kernel at |
| build time. On some systems (e.g. embedded ones), it is |
| necessary or convenient to provide some or all of the |
| kernel boot arguments with the kernel itself (that is, |
| to not rely on the boot loader to provide them.) |
| |
| To compile command line arguments into the kernel, |
| set this option to 'Y', then fill in the |
| the boot arguments in CONFIG_CMDLINE. |
| |
| Systems with fully functional boot loaders (i.e. non-embedded) |
| should leave this option set to 'N'. |
| |
| config CMDLINE |
| string "Built-in kernel command string" |
| depends on CMDLINE_BOOL |
| default "" |
| ---help--- |
| Enter arguments here that should be compiled into the kernel |
| image and used at boot time. If the boot loader provides a |
| command line at boot time, it is appended to this string to |
| form the full kernel command line, when the system boots. |
| |
| However, you can use the CONFIG_CMDLINE_OVERRIDE option to |
| change this behavior. |
| |
| In most cases, the command line (whether built-in or provided |
| by the boot loader) should specify the device for the root |
| file system. |
| |
| config CMDLINE_OVERRIDE |
| bool "Built-in command line overrides boot loader arguments" |
| default n |
| depends on CMDLINE_BOOL |
| ---help--- |
| Set this option to 'Y' to have the kernel ignore the boot loader |
| command line, and use ONLY the built-in command line. |
| |
| This is used to work around broken boot loaders. This should |
| be set to 'N' under normal conditions. |
| |
| endmenu |
| |
| config ARCH_ENABLE_MEMORY_HOTPLUG |
| def_bool y |
| depends on X86_64 || (X86_32 && HIGHMEM) |
| |
| config ARCH_ENABLE_MEMORY_HOTREMOVE |
| def_bool y |
| depends on MEMORY_HOTPLUG |
| |
| config HAVE_ARCH_EARLY_PFN_TO_NID |
| def_bool X86_64 |
| depends on NUMA |
| |
| menu "Power management and ACPI options" |
| |
| config ARCH_HIBERNATION_HEADER |
| def_bool y |
| depends on X86_64 && HIBERNATION |
| |
| source "kernel/power/Kconfig" |
| |
| source "drivers/acpi/Kconfig" |
| |
| source "drivers/sfi/Kconfig" |
| |
| config X86_APM_BOOT |
| bool |
| default y |
| depends on APM || APM_MODULE |
| |
| menuconfig APM |
| tristate "APM (Advanced Power Management) BIOS support" |
| depends on X86_32 && PM_SLEEP |
| ---help--- |
| APM is a BIOS specification for saving power using several different |
| techniques. This is mostly useful for battery powered laptops with |
| APM compliant BIOSes. If you say Y here, the system time will be |
| reset after a RESUME operation, the /proc/apm device will provide |
| battery status information, and user-space programs will receive |
| notification of APM "events" (e.g. battery status change). |
| |
| If you select "Y" here, you can disable actual use of the APM |
| BIOS by passing the "apm=off" option to the kernel at boot time. |
| |
| Note that the APM support is almost completely disabled for |
| machines with more than one CPU. |
| |
| In order to use APM, you will need supporting software. For location |
| and more information, read <file:Documentation/power/pm.txt> and the |
| Battery Powered Linux mini-HOWTO, available from |
| <http://www.tldp.org/docs.html#howto>. |
| |
| This driver does not spin down disk drives (see the hdparm(8) |
| manpage ("man 8 hdparm") for that), and it doesn't turn off |
| VESA-compliant "green" monitors. |
| |
| This driver does not support the TI 4000M TravelMate and the ACER |
| 486/DX4/75 because they don't have compliant BIOSes. Many "green" |
| desktop machines also don't have compliant BIOSes, and this driver |
| may cause those machines to panic during the boot phase. |
| |
| Generally, if you don't have a battery in your machine, there isn't |
| much point in using this driver and you should say N. If you get |
| random kernel OOPSes or reboots that don't seem to be related to |
| anything, try disabling/enabling this option (or disabling/enabling |
| APM in your BIOS). |
| |
| Some other things you should try when experiencing seemingly random, |
| "weird" problems: |
| |
| 1) make sure that you have enough swap space and that it is |
| enabled. |
| 2) pass the "no-hlt" option to the kernel |
| 3) switch on floating point emulation in the kernel and pass |
| the "no387" option to the kernel |
| 4) pass the "floppy=nodma" option to the kernel |
| 5) pass the "mem=4M" option to the kernel (thereby disabling |
| all but the first 4 MB of RAM) |
| 6) make sure that the CPU is not over clocked. |
| 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> |
| 8) disable the cache from your BIOS settings |
| 9) install a fan for the video card or exchange video RAM |
| 10) install a better fan for the CPU |
| 11) exchange RAM chips |
| 12) exchange the motherboard. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called apm. |
| |
| if APM |
| |
| config APM_IGNORE_USER_SUSPEND |
| bool "Ignore USER SUSPEND" |
| ---help--- |
| This option will ignore USER SUSPEND requests. On machines with a |
| compliant APM BIOS, you want to say N. However, on the NEC Versa M |
| series notebooks, it is necessary to say Y because of a BIOS bug. |
| |
| config APM_DO_ENABLE |
| bool "Enable PM at boot time" |
| ---help--- |
| Enable APM features at boot time. From page 36 of the APM BIOS |
| specification: "When disabled, the APM BIOS does not automatically |
| power manage devices, enter the Standby State, enter the Suspend |
| State, or take power saving steps in response to CPU Idle calls." |
| This driver will make CPU Idle calls when Linux is idle (unless this |
| feature is turned off -- see "Do CPU IDLE calls", below). This |
| should always save battery power, but more complicated APM features |
| will be dependent on your BIOS implementation. You may need to turn |
| this option off if your computer hangs at boot time when using APM |
| support, or if it beeps continuously instead of suspending. Turn |
| this off if you have a NEC UltraLite Versa 33/C or a Toshiba |
| T400CDT. This is off by default since most machines do fine without |
| this feature. |
| |
| config APM_CPU_IDLE |
| bool "Make CPU Idle calls when idle" |
| ---help--- |
| Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop. |
| On some machines, this can activate improved power savings, such as |
| a slowed CPU clock rate, when the machine is idle. These idle calls |
| are made after the idle loop has run for some length of time (e.g., |
| 333 mS). On some machines, this will cause a hang at boot time or |
| whenever the CPU becomes idle. (On machines with more than one CPU, |
| this option does nothing.) |
| |
| config APM_DISPLAY_BLANK |
| bool "Enable console blanking using APM" |
| ---help--- |
| Enable console blanking using the APM. Some laptops can use this to |
| turn off the LCD backlight when the screen blanker of the Linux |
| virtual console blanks the screen. Note that this is only used by |
| the virtual console screen blanker, and won't turn off the backlight |
| when using the X Window system. This also doesn't have anything to |
| do with your VESA-compliant power-saving monitor. Further, this |
| option doesn't work for all laptops -- it might not turn off your |
| backlight at all, or it might print a lot of errors to the console, |
| especially if you are using gpm. |
| |
| config APM_ALLOW_INTS |
| bool "Allow interrupts during APM BIOS calls" |
| ---help--- |
| Normally we disable external interrupts while we are making calls to |
| the APM BIOS as a measure to lessen the effects of a badly behaving |
| BIOS implementation. The BIOS should reenable interrupts if it |
| needs to. Unfortunately, some BIOSes do not -- especially those in |
| many of the newer IBM Thinkpads. If you experience hangs when you |
| suspend, try setting this to Y. Otherwise, say N. |
| |
| endif # APM |
| |
| source "arch/x86/kernel/cpu/cpufreq/Kconfig" |
| |
| source "drivers/cpuidle/Kconfig" |
| |
| source "drivers/idle/Kconfig" |
| |
| endmenu |
| |
| |
| menu "Bus options (PCI etc.)" |
| |
| config PCI |
| bool "PCI support" |
| default y |
| select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) |
| ---help--- |
| Find out whether you have a PCI motherboard. PCI is the name of a |
| bus system, i.e. the way the CPU talks to the other stuff inside |
| your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or |
| VESA. If you have PCI, say Y, otherwise N. |
| |
| choice |
| prompt "PCI access mode" |
| depends on X86_32 && PCI |
| default PCI_GOANY |
| ---help--- |
| On PCI systems, the BIOS can be used to detect the PCI devices and |
| determine their configuration. However, some old PCI motherboards |
| have BIOS bugs and may crash if this is done. Also, some embedded |
| PCI-based systems don't have any BIOS at all. Linux can also try to |
| detect the PCI hardware directly without using the BIOS. |
| |
| With this option, you can specify how Linux should detect the |
| PCI devices. If you choose "BIOS", the BIOS will be used, |
| if you choose "Direct", the BIOS won't be used, and if you |
| choose "MMConfig", then PCI Express MMCONFIG will be used. |
| If you choose "Any", the kernel will try MMCONFIG, then the |
| direct access method and falls back to the BIOS if that doesn't |
| work. If unsure, go with the default, which is "Any". |
| |
| config PCI_GOBIOS |
| bool "BIOS" |
| |
| config PCI_GOMMCONFIG |
| bool "MMConfig" |
| |
| config PCI_GODIRECT |
| bool "Direct" |
| |
| config PCI_GOOLPC |
| bool "OLPC" |
| depends on OLPC |
| |
| config PCI_GOANY |
| bool "Any" |
| |
| endchoice |
| |
| config PCI_BIOS |
| def_bool y |
| depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY) |
| |
| # x86-64 doesn't support PCI BIOS access from long mode so always go direct. |
| config PCI_DIRECT |
| def_bool y |
| depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC)) |
| |
| config PCI_MMCONFIG |
| def_bool y |
| depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY) |
| |
| config PCI_OLPC |
| def_bool y |
| depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY) |
| |
| config PCI_DOMAINS |
| def_bool y |
| depends on PCI |
| |
| config PCI_MMCONFIG |
| bool "Support mmconfig PCI config space access" |
| depends on X86_64 && PCI && ACPI |
| |
| config DMAR |
| bool "Support for DMA Remapping Devices (EXPERIMENTAL)" |
| depends on PCI_MSI && ACPI && EXPERIMENTAL |
| help |
| DMA remapping (DMAR) devices support enables independent address |
| translations for Direct Memory Access (DMA) from devices. |
| These DMA remapping devices are reported via ACPI tables |
| and include PCI device scope covered by these DMA |
| remapping devices. |
| |
| config DMAR_DEFAULT_ON |
| def_bool y |
| prompt "Enable DMA Remapping Devices by default" |
| depends on DMAR |
| help |
| Selecting this option will enable a DMAR device at boot time if |
| one is found. If this option is not selected, DMAR support can |
| be enabled by passing intel_iommu=on to the kernel. It is |
| recommended you say N here while the DMAR code remains |
| experimental. |
| |
| config DMAR_BROKEN_GFX_WA |
| def_bool n |
| prompt "Workaround broken graphics drivers (going away soon)" |
| depends on DMAR && BROKEN |
| ---help--- |
| Current Graphics drivers tend to use physical address |
| for DMA and avoid using DMA APIs. Setting this config |
| option permits the IOMMU driver to set a unity map for |
| all the OS-visible memory. Hence the driver can continue |
| to use physical addresses for DMA, at least until this |
| option is removed in the 2.6.32 kernel. |
| |
| config DMAR_FLOPPY_WA |
| def_bool y |
| depends on DMAR |
| ---help--- |
| Floppy disk drivers are known to bypass DMA API calls |
| thereby failing to work when IOMMU is enabled. This |
| workaround will setup a 1:1 mapping for the first |
| 16MiB to make floppy (an ISA device) work. |
| |
| config INTR_REMAP |
| bool "Support for Interrupt Remapping (EXPERIMENTAL)" |
| depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL |
| ---help--- |
| Supports Interrupt remapping for IO-APIC and MSI devices. |
| To use x2apic mode in the CPU's which support x2APIC enhancements or |
| to support platforms with CPU's having > 8 bit APIC ID, say Y. |
| |
| source "drivers/pci/pcie/Kconfig" |
| |
| source "drivers/pci/Kconfig" |
| |
| # x86_64 have no ISA slots, but do have ISA-style DMA. |
| config ISA_DMA_API |
| def_bool y |
| |
| if X86_32 |
| |
| config ISA |
| bool "ISA support" |
| ---help--- |
| Find out whether you have ISA slots on your motherboard. ISA is the |
| name of a bus system, i.e. the way the CPU talks to the other stuff |
| inside your box. Other bus systems are PCI, EISA, MicroChannel |
| (MCA) or VESA. ISA is an older system, now being displaced by PCI; |
| newer boards don't support it. If you have ISA, say Y, otherwise N. |
| |
| config EISA |
| bool "EISA support" |
| depends on ISA |
| ---help--- |
| The Extended Industry Standard Architecture (EISA) bus was |
| developed as an open alternative to the IBM MicroChannel bus. |
| |
| The EISA bus provided some of the features of the IBM MicroChannel |
| bus while maintaining backward compatibility with cards made for |
| the older ISA bus. The EISA bus saw limited use between 1988 and |
| 1995 when it was made obsolete by the PCI bus. |
| |
| Say Y here if you are building a kernel for an EISA-based machine. |
| |
| Otherwise, say N. |
| |
| source "drivers/eisa/Kconfig" |
| |
| config MCA |
| bool "MCA support" |
| ---help--- |
| MicroChannel Architecture is found in some IBM PS/2 machines and |
| laptops. It is a bus system similar to PCI or ISA. See |
| <file:Documentation/mca.txt> (and especially the web page given |
| there) before attempting to build an MCA bus kernel. |
| |
| source "drivers/mca/Kconfig" |
| |
| config SCx200 |
| tristate "NatSemi SCx200 support" |
| ---help--- |
| This provides basic support for National Semiconductor's |
| (now AMD's) Geode processors. The driver probes for the |
| PCI-IDs of several on-chip devices, so its a good dependency |
| for other scx200_* drivers. |
| |
| If compiled as a module, the driver is named scx200. |
| |
| config SCx200HR_TIMER |
| tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" |
| depends on SCx200 && GENERIC_TIME |
| default y |
| ---help--- |
| This driver provides a clocksource built upon the on-chip |
| 27MHz high-resolution timer. Its also a workaround for |
| NSC Geode SC-1100's buggy TSC, which loses time when the |
| processor goes idle (as is done by the scheduler). The |
| other workaround is idle=poll boot option. |
| |
| config OLPC |
| bool "One Laptop Per Child support" |
| select GPIOLIB |
| default n |
| ---help--- |
| Add support for detecting the unique features of the OLPC |
| XO hardware. |
| |
| endif # X86_32 |
| |
| config K8_NB |
| def_bool y |
| depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA))) |
| |
| source "drivers/pcmcia/Kconfig" |
| |
| source "drivers/pci/hotplug/Kconfig" |
| |
| endmenu |
| |
| |
| menu "Executable file formats / Emulations" |
| |
| source "fs/Kconfig.binfmt" |
| |
| config IA32_EMULATION |
| bool "IA32 Emulation" |
| depends on X86_64 |
| select COMPAT_BINFMT_ELF |
| ---help--- |
| Include code to run 32-bit programs under a 64-bit kernel. You should |
| likely turn this on, unless you're 100% sure that you don't have any |
| 32-bit programs left. |
| |
| config IA32_AOUT |
| tristate "IA32 a.out support" |
| depends on IA32_EMULATION |
| ---help--- |
| Support old a.out binaries in the 32bit emulation. |
| |
| config COMPAT |
| def_bool y |
| depends on IA32_EMULATION |
| |
| config COMPAT_FOR_U64_ALIGNMENT |
| def_bool COMPAT |
| depends on X86_64 |
| |
| config SYSVIPC_COMPAT |
| def_bool y |
| depends on COMPAT && SYSVIPC |
| |
| endmenu |
| |
| |
| config HAVE_ATOMIC_IOMAP |
| def_bool y |
| depends on X86_32 |
| |
| source "net/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "drivers/firmware/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| source "arch/x86/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| source "crypto/Kconfig" |
| |
| source "arch/x86/kvm/Kconfig" |
| |
| source "lib/Kconfig" |