[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.
With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:
int (*probe) (struct pcmcia_device *dev);
void (*remove) (struct pcmcia_device *dev);
int (*suspend) (struct pcmcia_device *dev);
int (*resume) (struct pcmcia_device *dev);
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 8fcb636..48774ef 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -227,8 +227,6 @@
static void tc574_config(dev_link_t *link);
static void tc574_release(dev_link_t *link);
-static int tc574_event(event_t event, int priority,
- event_callback_args_t *args);
static void mdio_sync(kio_addr_t ioaddr, int bits);
static int mdio_read(kio_addr_t ioaddr, int phy_id, int location);
@@ -250,9 +248,6 @@
static struct ethtool_ops netdev_ethtool_ops;
static void set_rx_mode(struct net_device *dev);
-static dev_info_t dev_info = "3c574_cs";
-
-static dev_link_t *tc574_attach(void);
static void tc574_detach(struct pcmcia_device *p_dev);
/*
@@ -261,20 +256,18 @@
with Card Services.
*/
-static dev_link_t *tc574_attach(void)
+static int tc574_attach(struct pcmcia_device *p_dev)
{
struct el3_private *lp;
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
- int ret;
DEBUG(0, "3c574_attach()\n");
/* Create the PC card device object. */
dev = alloc_etherdev(sizeof(struct el3_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
lp = netdev_priv(dev);
link = &lp->link;
link->priv = dev;
@@ -305,19 +298,13 @@
dev->watchdog_timeo = TX_TIMEOUT;
#endif
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- tc574_detach(link->handle);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ tc574_config(link);
+
+ return 0;
} /* tc574_attach */
/*
@@ -565,29 +552,6 @@
return 0;
}
-/*
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-*/
-
-static int tc574_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "3c574_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- tc574_config(link);
- break;
- }
- return 0;
-} /* tc574_event */
-
static void dump_status(struct net_device *dev)
{
kio_addr_t ioaddr = dev->base_addr;
@@ -1282,8 +1246,7 @@
.drv = {
.name = "3c574_cs",
},
- .attach = tc574_attach,
- .event = tc574_event,
+ .probe = tc574_attach,
.remove = tc574_detach,
.id_table = tc574_ids,
.suspend = tc574_suspend,
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 3516c02..1c3c9c6 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -143,8 +143,6 @@
static void tc589_config(dev_link_t *link);
static void tc589_release(dev_link_t *link);
-static int tc589_event(event_t event, int priority,
- event_callback_args_t *args);
static u16 read_eeprom(kio_addr_t ioaddr, int index);
static void tc589_reset(struct net_device *dev);
@@ -161,9 +159,6 @@
static void set_multicast_list(struct net_device *dev);
static struct ethtool_ops netdev_ethtool_ops;
-static dev_info_t dev_info = "3c589_cs";
-
-static dev_link_t *tc589_attach(void);
static void tc589_detach(struct pcmcia_device *p_dev);
/*======================================================================
@@ -174,20 +169,18 @@
======================================================================*/
-static dev_link_t *tc589_attach(void)
+static int tc589_attach(struct pcmcia_device *p_dev)
{
struct el3_private *lp;
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
- int ret;
DEBUG(0, "3c589_attach()\n");
-
+
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(struct el3_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
lp = netdev_priv(dev);
link = &lp->link;
link->priv = dev;
@@ -204,7 +197,7 @@
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
-
+
/* The EL3-specific entries in the device structure. */
SET_MODULE_OWNER(dev);
dev->hard_start_xmit = &el3_start_xmit;
@@ -219,19 +212,13 @@
#endif
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- tc589_detach(link->handle);
- return NULL;
- }
-
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ tc589_config(link);
+
+ return 0;
} /* tc589_attach */
/*======================================================================
@@ -439,31 +426,6 @@
return 0;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
-static int tc589_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "3c589_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- tc589_config(link);
- break;
- }
- return 0;
-} /* tc589_event */
-
/*====================================================================*/
/*
@@ -1057,8 +1019,7 @@
.drv = {
.name = "3c589_cs",
},
- .attach = tc589_attach,
- .event = tc589_event,
+ .probe = tc589_attach,
.remove = tc589_detach,
.id_table = tc589_ids,
.suspend = tc589_suspend,
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 3d36207..01ddfc8 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -87,8 +87,6 @@
static void axnet_config(dev_link_t *link);
static void axnet_release(dev_link_t *link);
-static int axnet_event(event_t event, int priority,
- event_callback_args_t *args);
static int axnet_open(struct net_device *dev);
static int axnet_close(struct net_device *dev);
static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -107,11 +105,8 @@
static void block_output(struct net_device *dev, int count,
const u_char *buf, const int start_page);
-static dev_link_t *axnet_attach(void);
static void axnet_detach(struct pcmcia_device *p_dev);
-static dev_info_t dev_info = "axnet_cs";
-
static void axdev_setup(struct net_device *dev);
static void AX88190_init(struct net_device *dev, int startp);
static int ax_open(struct net_device *dev);
@@ -146,13 +141,11 @@
======================================================================*/
-static dev_link_t *axnet_attach(void)
+static int axnet_attach(struct pcmcia_device *p_dev)
{
axnet_dev_t *info;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
DEBUG(0, "axnet_attach()\n");
@@ -160,7 +153,7 @@
"eth%d", axdev_setup);
if (!dev)
- return NULL;
+ return -ENOMEM;
info = PRIV(dev);
link = &info->link;
@@ -175,19 +168,13 @@
dev->do_ioctl = &axnet_ioctl;
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- axnet_detach(link->handle);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ axnet_config(link);
+
+ return 0;
} /* axnet_attach */
/*======================================================================
@@ -513,31 +500,6 @@
/*======================================================================
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
-static int axnet_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(2, "axnet_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- axnet_config(link);
- break;
- }
- return 0;
-} /* axnet_event */
-
-/*======================================================================
-
MII interface support
======================================================================*/
@@ -608,7 +570,7 @@
link->open++;
- request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, dev_info, dev);
+ request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, "axnet_cs", dev);
info->link_status = 0x00;
init_timer(&info->watchdog);
@@ -869,8 +831,7 @@
.drv = {
.name = "axnet_cs",
},
- .attach = axnet_attach,
- .event = axnet_event,
+ .probe = axnet_attach,
.remove = axnet_detach,
.id_table = axnet_ids,
.suspend = axnet_suspend,
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index d48dbd3..2827a48 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -120,12 +120,7 @@
static void com20020_config(dev_link_t *link);
static void com20020_release(dev_link_t *link);
-static int com20020_event(event_t event, int priority,
- event_callback_args_t *args);
-static dev_info_t dev_info = "com20020_cs";
-
-static dev_link_t *com20020_attach(void);
static void com20020_detach(struct pcmcia_device *p_dev);
/*====================================================================*/
@@ -143,21 +138,19 @@
======================================================================*/
-static dev_link_t *com20020_attach(void)
+static int com20020_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
com20020_dev_t *info;
struct net_device *dev;
- int ret;
struct arcnet_local *lp;
-
+
DEBUG(0, "com20020_attach()\n");
/* Create new network device */
link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link)
- return NULL;
+ return -ENOMEM;
info = kmalloc(sizeof(struct com20020_dev_t), GFP_KERNEL);
if (!info)
@@ -189,29 +182,19 @@
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
-
link->irq.Instance = info->dev = dev;
link->priv = info;
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- com20020_detach(link->handle);
- return NULL;
- }
+ link->state |= DEV_PRESENT;
+ com20020_config(link);
- return link;
+ return 0;
fail_alloc_dev:
kfree(info);
fail_alloc_info:
kfree(link);
- return NULL;
+ return -ENOMEM;
} /* com20020_attach */
/*======================================================================
@@ -442,31 +425,6 @@
return 0;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
-static int com20020_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "com20020_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT;
- com20020_config(link);
- break;
- }
- return 0;
-} /* com20020_event */
-
static struct pcmcia_device_id com20020_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.", "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
PCMCIA_DEVICE_NULL
@@ -478,8 +436,7 @@
.drv = {
.name = "com20020_cs",
},
- .attach = com20020_attach,
- .event = com20020_event,
+ .probe = com20020_attach,
.remove = com20020_detach,
.id_table = com20020_ids,
.suspend = com20020_suspend,
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index dad6393..28fe2fb 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -88,9 +88,6 @@
static int fmvj18x_get_hwinfo(dev_link_t *link, u_char *node_id);
static int fmvj18x_setup_mfc(dev_link_t *link);
static void fmvj18x_release(dev_link_t *link);
-static int fmvj18x_event(event_t event, int priority,
- event_callback_args_t *args);
-static dev_link_t *fmvj18x_attach(void);
static void fmvj18x_detach(struct pcmcia_device *p_dev);
/*
@@ -108,8 +105,6 @@
static void fjn_tx_timeout(struct net_device *dev);
static struct ethtool_ops netdev_ethtool_ops;
-static dev_info_t dev_info = "fmvj18x_cs";
-
/*
card type
*/
@@ -233,20 +228,18 @@
#define BANK_1U 0x24 /* bank 1 (CONFIG_1) */
#define BANK_2U 0x28 /* bank 2 (CONFIG_1) */
-static dev_link_t *fmvj18x_attach(void)
+static int fmvj18x_attach(struct pcmcia_device *p_dev)
{
local_info_t *lp;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
-
+
DEBUG(0, "fmvj18x_attach()\n");
/* Make up a FMVJ18x specific data structure */
dev = alloc_etherdev(sizeof(local_info_t));
if (!dev)
- return NULL;
+ return -ENOMEM;
lp = netdev_priv(dev);
link = &lp->link;
link->priv = dev;
@@ -261,7 +254,7 @@
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &fjn_interrupt;
link->irq.Instance = dev;
-
+
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
@@ -280,20 +273,14 @@
dev->watchdog_timeo = TX_TIMEOUT;
#endif
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
-
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- fmvj18x_detach(link->handle);
- return NULL;
- }
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ fmvj18x_config(link);
+
+ return 0;
} /* fmvj18x_attach */
/*====================================================================*/
@@ -734,22 +721,6 @@
/*====================================================================*/
-static int fmvj18x_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "fmvj18x_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- fmvj18x_config(link);
- break;
- }
- return 0;
-} /* fmvj18x_event */
-
static struct pcmcia_device_id fmvj18x_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
@@ -780,8 +751,7 @@
.drv = {
.name = "fmvj18x_cs",
},
- .attach = fmvj18x_attach,
- .event = fmvj18x_event,
+ .probe = fmvj18x_attach,
.remove = fmvj18x_detach,
.id_table = fmvj18x_ids,
.suspend = fmvj18x_suspend,
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 90da35d..b9c7e39 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -108,12 +108,6 @@
static void ibmtr_config(dev_link_t *link);
static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase);
static void ibmtr_release(dev_link_t *link);
-static int ibmtr_event(event_t event, int priority,
- event_callback_args_t *args);
-
-static dev_info_t dev_info = "ibmtr_cs";
-
-static dev_link_t *ibmtr_attach(void);
static void ibmtr_detach(struct pcmcia_device *p_dev);
/*====================================================================*/
@@ -144,25 +138,23 @@
======================================================================*/
-static dev_link_t *ibmtr_attach(void)
+static int ibmtr_attach(struct pcmcia_device *p_dev)
{
ibmtr_dev_t *info;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
DEBUG(0, "ibmtr_attach()\n");
/* Create new token-ring device */
info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info) return NULL;
+ if (!info) return -ENOMEM;
memset(info,0,sizeof(*info));
dev = alloc_trdev(sizeof(struct tok_info));
- if (!dev) {
- kfree(info);
- return NULL;
- }
+ if (!dev) {
+ kfree(info);
+ return -ENOMEM;
+ }
link = &info->link;
link->priv = info;
@@ -183,24 +175,13 @@
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- goto out_detach;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
-out:
- return link;
+ link->state |= DEV_PRESENT;
+ ibmtr_config(link);
-out_detach:
- ibmtr_detach(link->handle);
- link = NULL;
- goto out;
+ return 0;
} /* ibmtr_attach */
/*======================================================================
@@ -420,31 +401,6 @@
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
-static int ibmtr_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "ibmtr_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT;
- ibmtr_config(link);
- break;
- }
- return 0;
-} /* ibmtr_event */
-
/*====================================================================*/
static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase)
@@ -500,8 +456,7 @@
.drv = {
.name = "ibmtr_cs",
},
- .attach = ibmtr_attach,
- .event = ibmtr_event,
+ .probe = ibmtr_attach,
.remove = ibmtr_detach,
.id_table = ibmtr_ids,
.suspend = ibmtr_suspend,
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 0c9cb9f..4a23225 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -388,8 +388,6 @@
DRV_NAME " " DRV_VERSION " (Roger C. Pao)";
#endif
-static dev_info_t dev_info="nmclan_cs";
-
static char *if_names[]={
"Auto", "10baseT", "BNC",
};
@@ -421,8 +419,6 @@
static void nmclan_config(dev_link_t *link);
static void nmclan_release(dev_link_t *link);
-static int nmclan_event(event_t event, int priority,
- event_callback_args_t *args);
static void nmclan_reset(struct net_device *dev);
static int mace_config(struct net_device *dev, struct ifmap *map);
@@ -438,7 +434,6 @@
static struct ethtool_ops netdev_ethtool_ops;
-static dev_link_t *nmclan_attach(void);
static void nmclan_detach(struct pcmcia_device *p_dev);
/* ----------------------------------------------------------------------------
@@ -448,13 +443,11 @@
Services.
---------------------------------------------------------------------------- */
-static dev_link_t *nmclan_attach(void)
+static int nmclan_attach(struct pcmcia_device *p_dev)
{
mace_private *lp;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
DEBUG(0, "nmclan_attach()\n");
DEBUG(1, "%s\n", rcsid);
@@ -462,7 +455,7 @@
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(mace_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
lp = netdev_priv(dev);
link = &lp->link;
link->priv = dev;
@@ -496,19 +489,13 @@
dev->watchdog_timeo = TX_TIMEOUT;
#endif
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- nmclan_detach(link->handle);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ nmclan_config(link);
+
+ return 0;
} /* nmclan_attach */
/* ----------------------------------------------------------------------------
@@ -821,31 +808,6 @@
return 0;
}
-/* ----------------------------------------------------------------------------
-nmclan_event
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
----------------------------------------------------------------------------- */
-static int nmclan_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "nmclan_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- nmclan_config(link);
- break;
- case CS_EVENT_RESET_REQUEST:
- return 1;
- break;
- }
- return 0;
-} /* nmclan_event */
/* ----------------------------------------------------------------------------
nmclan_reset
@@ -1673,8 +1635,7 @@
.drv = {
.name = "nmclan_cs",
},
- .attach = nmclan_attach,
- .event = nmclan_event,
+ .probe = nmclan_attach,
.remove = nmclan_detach,
.id_table = nmclan_ids,
.suspend = nmclan_suspend,
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index b35c951..d85b758f3 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -105,8 +105,6 @@
static void mii_phy_probe(struct net_device *dev);
static void pcnet_config(dev_link_t *link);
static void pcnet_release(dev_link_t *link);
-static int pcnet_event(event_t event, int priority,
- event_callback_args_t *args);
static int pcnet_open(struct net_device *dev);
static int pcnet_close(struct net_device *dev);
static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -120,7 +118,6 @@
static int setup_dma_config(dev_link_t *link, int start_pg,
int stop_pg);
-static dev_link_t *pcnet_attach(void);
static void pcnet_detach(struct pcmcia_device *p_dev);
static dev_info_t dev_info = "pcnet_cs";
@@ -243,19 +240,17 @@
======================================================================*/
-static dev_link_t *pcnet_attach(void)
+static int pcnet_probe(struct pcmcia_device *p_dev)
{
pcnet_dev_t *info;
dev_link_t *link;
struct net_device *dev;
- client_reg_t client_reg;
- int ret;
DEBUG(0, "pcnet_attach()\n");
/* Create new ethernet device */
dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
- if (!dev) return NULL;
+ if (!dev) return -ENOMEM;
info = PRIV(dev);
link = &info->link;
link->priv = dev;
@@ -270,19 +265,13 @@
dev->stop = &pcnet_close;
dev->set_config = &set_config;
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- pcnet_detach(link->handle);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ pcnet_config(link);
+
+ return 0;
} /* pcnet_attach */
/*======================================================================
@@ -800,21 +789,6 @@
return 0;
}
-static int pcnet_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(2, "pcnet_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- pcnet_config(link);
- break;
- }
- return 0;
-} /* pcnet_event */
/*======================================================================
@@ -1835,8 +1809,7 @@
.drv = {
.name = "pcnet_cs",
},
- .attach = pcnet_attach,
- .event = pcnet_event,
+ .probe = pcnet_probe,
.remove = pcnet_detach,
.owner = THIS_MODULE,
.id_table = pcnet_ids,
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 9eb5cec..0122415df 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -102,8 +102,6 @@
currently have room for another Tx packet. */
#define MEMORY_WAIT_TIME 8
-static dev_info_t dev_info = "smc91c92_cs";
-
struct smc_private {
dev_link_t link;
spinlock_t lock;
@@ -279,12 +277,9 @@
/*====================================================================*/
-static dev_link_t *smc91c92_attach(void);
static void smc91c92_detach(struct pcmcia_device *p_dev);
static void smc91c92_config(dev_link_t *link);
static void smc91c92_release(dev_link_t *link);
-static int smc91c92_event(event_t event, int priority,
- event_callback_args_t *args);
static int smc_open(struct net_device *dev);
static int smc_close(struct net_device *dev);
@@ -313,20 +308,18 @@
======================================================================*/
-static dev_link_t *smc91c92_attach(void)
+static int smc91c92_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
struct smc_private *smc;
dev_link_t *link;
struct net_device *dev;
- int ret;
DEBUG(0, "smc91c92_attach()\n");
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(struct smc_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
smc = netdev_priv(dev);
link = &smc->link;
link->priv = dev;
@@ -364,19 +357,13 @@
smc->mii_if.phy_id_mask = 0x1f;
smc->mii_if.reg_num_mask = 0x1f;
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- smc91c92_detach(link->handle);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ smc91c92_config(link);
+
+ return 0;
} /* smc91c92_attach */
/*======================================================================
@@ -1212,31 +1199,6 @@
/*======================================================================
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
-static int smc91c92_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "smc91c92_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- smc91c92_config(link);
- break;
- }
- return 0;
-} /* smc91c92_event */
-
-/*======================================================================
-
MII interface support for SMC91cXX based cards
======================================================================*/
@@ -2349,8 +2311,7 @@
.drv = {
.name = "smc91c92_cs",
},
- .attach = smc91c92_attach,
- .event = smc91c92_event,
+ .probe = smc91c92_attach,
.remove = smc91c92_detach,
.id_table = smc91c92_ids,
.suspend = smc91c92_suspend,
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 8c8cc40..049c34b3 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -292,8 +292,6 @@
static int has_ce2_string(dev_link_t * link);
static void xirc2ps_config(dev_link_t * link);
static void xirc2ps_release(dev_link_t * link);
-static int xirc2ps_event(event_t event, int priority,
- event_callback_args_t * args);
/****************
* The attach() and detach() entry points are used to create and destroy
@@ -301,7 +299,6 @@
* needed to manage one actual PCMCIA card.
*/
-static dev_link_t *xirc2ps_attach(void);
static void xirc2ps_detach(struct pcmcia_device *p_dev);
/****************
@@ -313,14 +310,6 @@
static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card configuration
- * database.
- */
-
-static dev_info_t dev_info = "xirc2ps_cs";
-
/****************
* A linked list of "instances" of the device. Each actual
* PCMCIA card corresponds to one device instance, and is described
@@ -563,21 +552,19 @@
* card insertion event.
*/
-static dev_link_t *
-xirc2ps_attach(void)
+static int
+xirc2ps_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
local_info_t *local;
- int err;
DEBUG(0, "attach()\n");
/* Allocate the device structure */
dev = alloc_etherdev(sizeof(local_info_t));
if (!dev)
- return NULL;
+ return -ENOMEM;
local = netdev_priv(dev);
link = &local->link;
link->priv = dev;
@@ -606,18 +593,13 @@
dev->watchdog_timeo = TX_TIMEOUT;
#endif
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- if ((err = pcmcia_register_client(&link->handle, &client_reg))) {
- cs_error(link->handle, RegisterClient, err);
- xirc2ps_detach(link->handle);
- return NULL;
- }
+ link->handle = p_dev;
+ p_dev->instance = link;
- return link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ xirc2ps_config(link);
+
+ return 0;
} /* xirc2ps_attach */
/****************
@@ -1162,34 +1144,6 @@
return 0;
}
-/****************
- * The card status event handler. Mostly, this schedules other
- * stuff to run after an event is received. A CARD_REMOVAL event
- * also sets some flags to discourage the net drivers from trying
- * to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag
- * to block future accesses to this device. All the functions that
- * actually access the device should check this flag to make sure
- * the card is still present.
- */
-
-static int
-xirc2ps_event(event_t event, int priority,
- event_callback_args_t * args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(0, "event(%d)\n", (int)event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- xirc2ps_config(link);
- break;
- }
- return 0;
-} /* xirc2ps_event */
/*====================================================================*/
@@ -1981,8 +1935,7 @@
.drv = {
.name = "xirc2ps_cs",
},
- .attach = xirc2ps_attach,
- .event = xirc2ps_event,
+ .probe = xirc2ps_attach,
.remove = xirc2ps_detach,
.id_table = xirc2ps_ids,
.suspend = xirc2ps_suspend,
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 88805a4..a496460 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -82,8 +82,6 @@
static void airo_config(dev_link_t *link);
static void airo_release(dev_link_t *link);
-static int airo_event(event_t event, int priority,
- event_callback_args_t *args);
/*
The attach() and detach() entry points are used to create and destroy
@@ -91,7 +89,6 @@
needed to manage one actual PCMCIA card.
*/
-static dev_link_t *airo_attach(void);
static void airo_detach(struct pcmcia_device *p_dev);
/*
@@ -102,14 +99,6 @@
*/
/*
- The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-
-static dev_info_t dev_info = "airo_cs";
-
-/*
A linked list of "instances" of the aironet device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -152,20 +141,18 @@
======================================================================*/
-static dev_link_t *airo_attach(void)
+static int airo_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
local_info_t *local;
- int ret;
-
+
DEBUG(0, "airo_attach()\n");
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link) {
printk(KERN_ERR "airo_cs: no memory for new device\n");
- return NULL;
+ return -ENOMEM;
}
/* Interrupt setup */
@@ -189,23 +176,17 @@
if (!local) {
printk(KERN_ERR "airo_cs: no memory for new device\n");
kfree (link);
- return NULL;
+ return -ENOMEM;
}
link->priv = local;
-
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- airo_detach(link->handle);
- return NULL;
- }
-
- return link;
+
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ airo_config(link);
+
+ return 0;
} /* airo_attach */
/*======================================================================
@@ -497,34 +478,6 @@
return 0;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
- ======================================================================*/
-
-static int airo_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "airo_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- airo_config(link);
- break;
- }
- return 0;
-} /* airo_event */
-
static struct pcmcia_device_id airo_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x015f, 0x000a),
PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0005),
@@ -539,8 +492,7 @@
.drv = {
.name = "airo_cs",
},
- .attach = airo_attach,
- .event = airo_event,
+ .probe = airo_attach,
.remove = airo_detach,
.id_table = airo_ids,
.suspend = airo_suspend,
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 32f0097..d6f4a5a 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -93,8 +93,6 @@
static void atmel_config(dev_link_t *link);
static void atmel_release(dev_link_t *link);
-static int atmel_event(event_t event, int priority,
- event_callback_args_t *args);
/*
The attach() and detach() entry points are used to create and destroy
@@ -102,7 +100,6 @@
needed to manage one actual PCMCIA card.
*/
-static dev_link_t *atmel_attach(void);
static void atmel_detach(struct pcmcia_device *p_dev);
/*
@@ -113,14 +110,6 @@
*/
/*
- The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-
-static dev_info_t dev_info = "atmel_cs";
-
-/*
A linked list of "instances" of the atmelnet device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -163,27 +152,25 @@
======================================================================*/
-static dev_link_t *atmel_attach(void)
+static int atmel_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
local_info_t *local;
- int ret;
-
+
DEBUG(0, "atmel_attach()\n");
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link) {
printk(KERN_ERR "atmel_cs: no memory for new device\n");
- return NULL;
+ return -ENOMEM;
}
-
+
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = NULL;
-
+
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -194,29 +181,23 @@
link->conf.Attributes = 0;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
-
+
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) {
printk(KERN_ERR "atmel_cs: no memory for new device\n");
kfree (link);
- return NULL;
+ return -ENOMEM;
}
link->priv = local;
-
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- atmel_detach(link->handle);
- return NULL;
- }
-
- return link;
+
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ atmel_config(link);
+
+ return 0;
} /* atmel_attach */
/*======================================================================
@@ -485,34 +466,6 @@
return 0;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
- ======================================================================*/
-
-static int atmel_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "atmel_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- atmel_config(link);
- break;
- }
- return 0;
-} /* atmel_event */
-
/*====================================================================*/
/* We use the driver_info field to store the correct firmware type for a card. */
@@ -562,8 +515,7 @@
.drv = {
.name = "atmel_cs",
},
- .attach = atmel_attach,
- .event = atmel_event,
+ .probe = atmel_attach,
.remove = atmel_detach,
.id_table = atmel_ids,
.suspend = atmel_suspend,
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 195a5bf3..8bc0b528 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -204,8 +204,7 @@
static void prism2_detach(struct pcmcia_device *p_dev);
static void prism2_release(u_long arg);
-static int prism2_event(event_t event, int priority,
- event_callback_args_t *args);
+static int prism2_config(dev_link_t *link);
static int prism2_pccard_card_present(local_info_t *local)
@@ -502,15 +501,13 @@
/* allocate local data and register with CardServices
* initialize dev_link structure, but do not configure the card yet */
-static dev_link_t *prism2_attach(void)
+static int prism2_attach(struct pcmcia_device *p_dev)
{
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
link = kmalloc(sizeof(dev_link_t), GFP_KERNEL);
if (link == NULL)
- return NULL;
+ return -ENOMEM;
memset(link, 0, sizeof(dev_link_t));
@@ -518,18 +515,14 @@
link->conf.Vcc = 33;
link->conf.IntType = INT_MEMORY_AND_IO;
- /* register with CardServices */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- prism2_detach(link->handle);
- return NULL;
- }
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ if (prism2_config(link))
+ PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
+
+ return 0;
}
@@ -878,29 +871,6 @@
return 0;
}
-static int prism2_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_INSERTION\n", dev_info);
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- if (prism2_config(link)) {
- PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
- }
- break;
-
- default:
- PDEBUG(DEBUG_EXTRA, "%s: prism2_event() - unknown event %d\n",
- dev_info, event);
- break;
- }
- return 0;
-}
-
-
static struct pcmcia_device_id hostap_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
@@ -959,10 +929,9 @@
.drv = {
.name = "hostap_cs",
},
- .attach = prism2_attach,
+ .probe = prism2_attach,
.remove = prism2_detach,
.owner = THIS_MODULE,
- .event = prism2_event,
.id_table = hostap_cs_ids,
.suspend = hostap_cs_suspend,
.resume = hostap_cs_resume,
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index af9a32d..bf6271e 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -166,8 +166,6 @@
#define DEBUG(n, args...)
#endif
-static dev_info_t dev_info = "netwave_cs";
-
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
@@ -195,11 +193,8 @@
/* PCMCIA (Card Services) related functions */
static void netwave_release(dev_link_t *link); /* Card removal */
-static int netwave_event(event_t event, int priority,
- event_callback_args_t *args);
static void netwave_pcmcia_config(dev_link_t *arg); /* Runs after card
insertion */
-static dev_link_t *netwave_attach(void); /* Create instance */
static void netwave_detach(struct pcmcia_device *p_dev); /* Destroy instance */
/* Hardware configuration */
@@ -383,20 +378,18 @@
* configure the card at this point -- we wait until we receive a
* card insertion event.
*/
-static dev_link_t *netwave_attach(void)
+static int netwave_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
netwave_private *priv;
- int ret;
-
+
DEBUG(0, "netwave_attach()\n");
-
+
/* Initialize the dev_link_t structure */
dev = alloc_etherdev(sizeof(netwave_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
link = &priv->link;
link->priv = dev;
@@ -438,20 +431,14 @@
dev->open = &netwave_open;
dev->stop = &netwave_close;
link->irq.Instance = dev;
-
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- netwave_detach(link->handle);
- return NULL;
- }
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ netwave_pcmcia_config( link);
+
+ return 0;
} /* netwave_attach */
/*
@@ -935,36 +922,6 @@
/*
- * Function netwave_event (event, priority, args)
- *
- * The card status event handler. Mostly, this schedules other
- * stuff to run after an event is received. A CARD_REMOVAL event
- * also sets some flags to discourage the net drivers from trying
- * to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag
- * to block future accesses to this device. All the functions that
- * actually access the device should check this flag to make sure
- * the card is still present.
- *
- */
-static int netwave_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "netwave_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- netwave_pcmcia_config( link);
- break;
- }
- return 0;
-} /* netwave_event */
-
-/*
* Function netwave_doreset (ioBase, ramBase)
*
* Proper hardware reset of the card.
@@ -1456,8 +1413,7 @@
.drv = {
.name = "netwave_cs",
},
- .attach = netwave_attach,
- .event = netwave_event,
+ .probe = netwave_attach,
.remove = netwave_detach,
.id_table = netwave_ids,
.suspend = netwave_suspend,
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index bfeeef4..b664708 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -43,17 +43,6 @@
MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
/********************************************************************/
-/* Magic constants */
-/********************************************************************/
-
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card
- * configuration database.
- */
-static dev_info_t dev_info = DRIVER_NAME;
-
-/********************************************************************/
/* Data structures */
/********************************************************************/
@@ -74,6 +63,7 @@
/* Function prototypes */
/********************************************************************/
+static void orinoco_cs_config(dev_link_t *link);
static void orinoco_cs_release(dev_link_t *link);
static void orinoco_cs_detach(struct pcmcia_device *p_dev);
@@ -113,19 +103,17 @@
* The dev_link structure is initialized, but we don't actually
* configure the card at this point -- we wait until we receive a card
* insertion event. */
-static dev_link_t *
-orinoco_cs_attach(void)
+static int
+orinoco_cs_attach(struct pcmcia_device *p_dev)
{
struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
if (! dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
card = priv->card;
@@ -150,18 +138,13 @@
/* Register with Card Services */
link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210; /* FIXME: what does this mean? */
- client_reg.event_callback_args.client_data = link;
+ link->handle = p_dev;
+ p_dev->instance = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- orinoco_cs_detach(link->handle);
- return NULL;
- }
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ orinoco_cs_config(link);
- return link;
+ return 0;
} /* orinoco_cs_attach */
/*
@@ -521,26 +504,6 @@
}
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received.
- */
-static int
-orinoco_cs_event(event_t event, int priority,
- event_callback_args_t * args)
-{
- dev_link_t *link = args->client_data;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- orinoco_cs_config(link);
- break;
- }
-
- return 0;
-} /* orinoco_cs_event */
-
/********************************************************************/
/* Module initialization */
/********************************************************************/
@@ -640,9 +603,8 @@
.drv = {
.name = DRIVER_NAME,
},
- .attach = orinoco_cs_attach,
+ .probe = orinoco_cs_attach,
.remove = orinoco_cs_detach,
- .event = orinoco_cs_event,
.id_table = orinoco_cs_ids,
.suspend = orinoco_cs_suspend,
.resume = orinoco_cs_resume,
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 33a89e2..319180c 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -92,8 +92,6 @@
/** Prototypes based on PCMCIA skeleton driver *******************************/
static void ray_config(dev_link_t *link);
static void ray_release(dev_link_t *link);
-static int ray_event(event_t event, int priority, event_callback_args_t *args);
-static dev_link_t *ray_attach(void);
static void ray_detach(struct pcmcia_device *p_dev);
/***** Prototypes indicated by device structure ******************************/
@@ -192,12 +190,6 @@
static char *phy_addr = NULL;
-/* The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-static dev_info_t dev_info = "ray_cs";
-
/* A linked list of "instances" of the ray device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -314,12 +306,10 @@
configure the card at this point -- we wait until we receive a
card insertion event.
=============================================================================*/
-static dev_link_t *ray_attach(void)
+static int ray_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
ray_dev_t *local;
- int ret;
struct net_device *dev;
DEBUG(1, "ray_attach()\n");
@@ -328,7 +318,7 @@
link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link)
- return NULL;
+ return -ENOMEM;
/* Allocate space for private device-specific data */
dev = alloc_etherdev(sizeof(ray_dev_t));
@@ -387,30 +377,19 @@
dev->stop = &ray_dev_close;
netif_stop_queue(dev);
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
-
- DEBUG(2,"ray_cs ray_attach calling pcmcia_register_client(...)\n");
-
init_timer(&local->timer);
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- printk("ray_cs ray_attach RegisterClient unhappy - detaching\n");
- cs_error(link->handle, RegisterClient, ret);
- ray_detach(link->handle);
- return NULL;
- }
- DEBUG(2,"ray_cs ray_attach ending\n");
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ ray_config(link);
+
+ return 0;
fail_alloc_dev:
kfree(link);
- return NULL;
+ return -ENOMEM;
} /* ray_attach */
/*=============================================================================
This deletes a driver "instance". The device is de-registered
@@ -924,32 +903,6 @@
return 0;
}
-/*=============================================================================
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
- When a CARD_REMOVAL event is received, we immediately set a flag
- to block future accesses to this device. All the functions that
- actually access the device should check this flag to make sure
- the card is still present.
-=============================================================================*/
-static int ray_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
- DEBUG(1, "ray_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- ray_config(link);
- break;
- }
- return 0;
- DEBUG(2,"ray_event ending\n");
-} /* ray_event */
/*===========================================================================*/
int ray_dev_init(struct net_device *dev)
{
@@ -2945,8 +2898,7 @@
.drv = {
.name = "ray_cs",
},
- .attach = ray_attach,
- .event = ray_event,
+ .probe = ray_attach,
.remove = ray_detach,
.id_table = ray_ids,
.suspend = ray_suspend,
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 1933250..fee4be1 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -57,17 +57,6 @@
MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
/********************************************************************/
-/* Magic constants */
-/********************************************************************/
-
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card
- * configuration database.
- */
-static dev_info_t dev_info = DRIVER_NAME;
-
-/********************************************************************/
/* Data structures */
/********************************************************************/
@@ -82,8 +71,8 @@
/* Function prototypes */
/********************************************************************/
+static void spectrum_cs_config(dev_link_t *link);
static void spectrum_cs_release(dev_link_t *link);
-static void spectrum_cs_detach(struct pcmcia_device *p_dev);
/********************************************************************/
/* Firmware downloader */
@@ -594,19 +583,17 @@
* The dev_link structure is initialized, but we don't actually
* configure the card at this point -- we wait until we receive a card
* insertion event. */
-static dev_link_t *
-spectrum_cs_attach(void)
+static int
+spectrum_cs_attach(struct pcmcia_device *p_dev)
{
struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset);
if (! dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
card = priv->card;
@@ -628,22 +615,13 @@
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
- /* Register with Card Services */
- /* FIXME: need a lock? */
- link->next = NULL; /* not needed */
+ link->handle = p_dev;
+ p_dev->instance = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210; /* FIXME: what does this mean? */
- client_reg.event_callback_args.client_data = link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ spectrum_cs_config(link);
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- spectrum_cs_detach(link->handle);
- return NULL;
- }
-
- return link;
+ return 0;
} /* spectrum_cs_attach */
/*
@@ -977,26 +955,6 @@
return 0;
}
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received.
- */
-static int
-spectrum_cs_event(event_t event, int priority,
- event_callback_args_t * args)
-{
- dev_link_t *link = args->client_data;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- spectrum_cs_config(link);
- break;
-
- }
-
- return 0;
-} /* spectrum_cs_event */
/********************************************************************/
/* Module initialization */
@@ -1021,11 +979,10 @@
.drv = {
.name = DRIVER_NAME,
},
- .attach = spectrum_cs_attach,
+ .probe = spectrum_cs_attach,
.remove = spectrum_cs_detach,
.suspend = spectrum_cs_suspend,
.resume = spectrum_cs_resume,
- .event = spectrum_cs_event,
.id_table = spectrum_cs_ids,
};
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 196e827..7e2039f 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4594,14 +4594,12 @@
* configure the card at this point -- we wait until we receive a
* card insertion event.
*/
-static dev_link_t *
-wavelan_attach(void)
+static int
+wavelan_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg; /* Register with cardmgr */
dev_link_t * link; /* Info for cardmgr */
struct net_device * dev; /* Interface generic data */
net_local * lp; /* Interface specific data */
- int ret;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "-> wavelan_attach()\n");
@@ -4609,7 +4607,7 @@
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
- if (!link) return NULL;
+ if (!link) return -ENOMEM;
/* The io structure describes IO port mapping */
link->io.NumPorts1 = 8;
@@ -4633,7 +4631,7 @@
dev = alloc_etherdev(sizeof(net_local));
if (!dev) {
kfree(link);
- return NULL;
+ return -ENOMEM;
}
link->priv = link->irq.Instance = dev;
@@ -4678,28 +4676,21 @@
/* Other specific data */
dev->mtu = WAVELAN_MTU;
- /* Register with Card Services */
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
+ link->handle = p_dev;
+ p_dev->instance = link;
-#ifdef DEBUG_CONFIG_INFO
- printk(KERN_DEBUG "wavelan_attach(): almost done, calling pcmcia_register_client\n");
-#endif
-
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if(ret != 0)
- {
- cs_error(link->handle, RegisterClient, ret);
- wavelan_detach(link->handle);
- return NULL;
- }
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ if(wv_pcmcia_config(link) &&
+ wv_hw_config(dev))
+ wv_init_info(dev);
+ else
+ dev->irq = 0;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "<- wavelan_attach()\n");
#endif
- return link;
+ return 0;
}
/*------------------------------------------------------------------*/
@@ -4801,52 +4792,6 @@
}
-/*------------------------------------------------------------------*/
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received. A CARD_REMOVAL event also sets
- * some flags to discourage the net drivers from trying to talk to the
- * card any more.
- */
-static int
-wavelan_event(event_t event, /* The event received */
- int priority,
- event_callback_args_t * args)
-{
- dev_link_t * link = (dev_link_t *) args->client_data;
- struct net_device * dev = (struct net_device *) link->priv;
-
-#ifdef DEBUG_CALLBACK_TRACE
- printk(KERN_DEBUG "->wavelan_event(): %s\n",
- ((event == CS_EVENT_REGISTRATION_COMPLETE)?"registration complete" :
- ((event == CS_EVENT_CARD_REMOVAL) ? "card removal" :
- ((event == CS_EVENT_CARD_INSERTION) ? "card insertion" :
- ((event == CS_EVENT_PM_SUSPEND) ? "pm suspend" :
- ((event == CS_EVENT_RESET_PHYSICAL) ? "physical reset" :
- ((event == CS_EVENT_PM_RESUME) ? "pm resume" :
- ((event == CS_EVENT_CARD_RESET) ? "card reset" :
- "unknown"))))))));
-#endif
-
- switch(event)
- {
- case CS_EVENT_CARD_INSERTION:
- /* Reset and configure the card */
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- if(wv_pcmcia_config(link) &&
- wv_hw_config(dev))
- wv_init_info(dev);
- else
- dev->irq = 0;
- break;
- }
-
-#ifdef DEBUG_CALLBACK_TRACE
- printk(KERN_DEBUG "<-wavelan_event()\n");
-#endif
- return 0;
-}
-
static struct pcmcia_device_id wavelan_ids[] = {
PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
@@ -4861,8 +4806,7 @@
.drv = {
.name = "wavelan_cs",
},
- .attach = wavelan_attach,
- .event = wavelan_event,
+ .probe = wavelan_attach,
.remove = wavelan_detach,
.id_table = wavelan_ids,
.suspend = wavelan_suspend,
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index a1a1917..f2d5975 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -754,19 +754,11 @@
static int
wavelan_open(struct net_device *), /* Open the device */
wavelan_close(struct net_device *); /* Close the device */
-static dev_link_t *
- wavelan_attach(void); /* Create a new device */
static void
wavelan_detach(struct pcmcia_device *p_dev); /* Destroy a removed device */
-static int
- wavelan_event(event_t, /* Manage pcmcia events */
- int,
- event_callback_args_t *);
/**************************** VARIABLES ****************************/
-static dev_info_t dev_info = "wavelan_cs";
-
/*
* Parameters that can be set with 'insmod'
* The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 21e498f..48e10b0 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -105,7 +105,6 @@
*/
static void wl3501_config(dev_link_t *link);
static void wl3501_release(dev_link_t *link);
-static int wl3501_event(event_t event, int pri, event_callback_args_t *args);
/*
* The dev_info variable is the "key" that is used to match up this
@@ -1954,18 +1953,16 @@
* The dev_link structure is initialized, but we don't actually configure the
* card at this point -- we wait until we receive a card insertion event.
*/
-static dev_link_t *wl3501_attach(void)
+static int wl3501_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
struct wl3501_card *this;
- int ret;
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(*link), GFP_KERNEL);
if (!link)
- goto out;
+ return -ENOMEM;
/* The io structure describes IO port mapping */
link->io.NumPorts1 = 16;
@@ -2001,24 +1998,17 @@
netif_stop_queue(dev);
link->priv = link->irq.Instance = dev;
- /* Register with Card Services */
- link->next = wl3501_dev_list;
- wl3501_dev_list = link;
- client_reg.dev_info = &wl3501_dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret) {
- cs_error(link->handle, RegisterClient, ret);
- wl3501_detach(link->handle);
- link = NULL;
- }
-out:
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ wl3501_config(link);
+
+ return 0;
out_link:
kfree(link);
link = NULL;
- goto out;
+ return -ENOMEM;
}
#define CS_CHECK(fn, ret) \
@@ -2206,33 +2196,6 @@
}
-/**
- * wl3501_event - The card status event handler
- * @event - event
- * @pri - priority
- * @args - arguments for this event
- *
- * The card status event handler. Mostly, this schedules other stuff to run
- * after an event is received. A CARD_REMOVAL event also sets some flags to
- * discourage the net drivers from trying to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag to block
- * future accesses to this device. All the functions that actually access the
- * device should check this flag to make sure the card is still present.
- */
-static int wl3501_event(event_t event, int pri, event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- wl3501_config(link);
- break;
- }
- return 0;
-}
-
static struct pcmcia_device_id wl3501_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0001),
PCMCIA_DEVICE_NULL
@@ -2244,8 +2207,7 @@
.drv = {
.name = "wl3501_cs",
},
- .attach = wl3501_attach,
- .event = wl3501_event,
+ .probe = wl3501_attach,
.remove = wl3501_detach,
.id_table = wl3501_ids,
.suspend = wl3501_suspend,