diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 58635f7..220ac70 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -502,10 +502,11 @@
 		};
 
 		sata: sata@3200000 {
-			compatible = "fsl,ls1043a-ahci", "fsl,ls1021a-ahci";
+			compatible = "fsl,ls1043a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
 			interrupts = <0 69 0x4>;
 			clocks = <&clockgen 4 0>;
+			dma-coherent;
 		};
 
 		msi1: msi-controller1@1571000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index d105976..337da90 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -683,6 +683,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>;
 			interrupts = <0 133 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
+			dma-coherent;
 		};
 
 		sata1: sata@3210000 {
@@ -691,6 +692,7 @@
 			reg = <0x0 0x3210000 0x0 0x10000>;
 			interrupts = <0 136 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
+			dma-coherent;
 		};
 
 		usb0: usb3@3100000 {
diff --git a/arch/ia64/include/asm/libata-portmap.h b/arch/ia64/include/asm/libata-portmap.h
index 0e00c9a..7a1f831 100644
--- a/arch/ia64/include/asm/libata-portmap.h
+++ b/arch/ia64/include/asm/libata-portmap.h
@@ -1,12 +1,8 @@
 #ifndef __ASM_IA64_LIBATA_PORTMAP_H
 #define __ASM_IA64_LIBATA_PORTMAP_H
 
-#define ATA_PRIMARY_CMD		0x1F0
-#define ATA_PRIMARY_CTL		0x3F6
 #define ATA_PRIMARY_IRQ(dev)	isa_irq_to_vector(14)
 
-#define ATA_SECONDARY_CMD	0x170
-#define ATA_SECONDARY_CTL	0x376
 #define ATA_SECONDARY_IRQ(dev)	isa_irq_to_vector(15)
 
 #endif
diff --git a/arch/powerpc/include/asm/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h
index 4d85180..4396db5 100644
--- a/arch/powerpc/include/asm/libata-portmap.h
+++ b/arch/powerpc/include/asm/libata-portmap.h
@@ -1,12 +1,8 @@
 #ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
 #define __ASM_POWERPC_LIBATA_PORTMAP_H
 
-#define ATA_PRIMARY_CMD	0x1F0
-#define ATA_PRIMARY_CTL	0x3F6
 #define ATA_PRIMARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 0)
 
-#define ATA_SECONDARY_CMD	0x170
-#define ATA_SECONDARY_CTL	0x376
 #define ATA_SECONDARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 1)
 
 #endif
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 90eabaf..ba5f11c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1400,142 +1400,56 @@
 }
 #endif
 
-/*
- * ahci_init_msix() - optionally enable per-port MSI-X otherwise defer
- * to single msi.
- */
-static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,
-			  struct ahci_host_priv *hpriv, unsigned long flags)
+static int ahci_get_irq_vector(struct ata_host *host, int port)
 {
-	int nvec, i, rc;
-
-	/* Do not init MSI-X if MSI is disabled for the device */
-	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
-		return -ENODEV;
-
-	nvec = pci_msix_vec_count(pdev);
-	if (nvec < 0)
-		return nvec;
-
-	/*
-	 * Proper MSI-X implementations will have a vector per-port.
-	 * Barring that, we prefer single-MSI over single-MSIX.  If this
-	 * check fails (not enough MSI-X vectors for all ports) we will
-	 * be called again with the flag clear iff ahci_init_msi()
-	 * fails.
-	 */
-	if (flags & AHCI_HFLAG_MULTI_MSIX) {
-		if (nvec < n_ports)
-			return -ENODEV;
-		nvec = n_ports;
-	} else if (nvec) {
-		nvec = 1;
-	} else {
-		/*
-		 * Emit dev_err() since this was the non-legacy irq
-		 * method of last resort.
-		 */
-		rc = -ENODEV;
-		goto fail;
-	}
-
-	for (i = 0; i < nvec; i++)
-		hpriv->msix[i].entry = i;
-	rc = pci_enable_msix_exact(pdev, hpriv->msix, nvec);
-	if (rc < 0)
-		goto fail;
-
-	if (nvec > 1)
-		hpriv->flags |= AHCI_HFLAG_MULTI_MSIX;
-	hpriv->irq = hpriv->msix[0].vector; /* for single msi-x */
-
-	return nvec;
-fail:
-	dev_err(&pdev->dev,
-		"failed to enable MSI-X with error %d, # of vectors: %d\n",
-		rc, nvec);
-
-	return rc;
+	return pci_irq_vector(to_pci_dev(host->dev), port);
 }
 
 static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 			struct ahci_host_priv *hpriv)
 {
-	int rc, nvec;
+	int nvec;
 
 	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
 		return -ENODEV;
 
-	nvec = pci_msi_vec_count(pdev);
-	if (nvec < 0)
-		return nvec;
-
 	/*
 	 * If number of MSIs is less than number of ports then Sharing Last
 	 * Message mode could be enforced. In this case assume that advantage
 	 * of multipe MSIs is negated and use single MSI mode instead.
 	 */
-	if (nvec < n_ports)
-		goto single_msi;
+	nvec = pci_alloc_irq_vectors(pdev, n_ports, INT_MAX,
+			PCI_IRQ_MSIX | PCI_IRQ_MSI);
+	if (nvec > 0) {
+		if (!(readl(hpriv->mmio + HOST_CTL) & HOST_MRSM)) {
+			hpriv->get_irq_vector = ahci_get_irq_vector;
+			hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
+			return nvec;
+		}
 
-	rc = pci_enable_msi_exact(pdev, nvec);
-	if (rc == -ENOSPC)
-		goto single_msi;
-	if (rc < 0)
-		return rc;
-
-	/* fallback to single MSI mode if the controller enforced MRSM mode */
-	if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) {
-		pci_disable_msi(pdev);
+		/*
+		 * Fallback to single MSI mode if the controller enforced MRSM
+		 * mode.
+		 */
 		printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n");
-		goto single_msi;
+		pci_free_irq_vectors(pdev);
 	}
 
-	if (nvec > 1)
-		hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
-
-	goto out;
-
-single_msi:
-	nvec = 1;
-
-	rc = pci_enable_msi(pdev);
-	if (rc < 0)
-		return rc;
-out:
-	hpriv->irq = pdev->irq;
-
-	return nvec;
-}
-
-static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
-				struct ahci_host_priv *hpriv)
-{
-	int nvec;
+	/*
+	 * -ENOSPC indicated we don't have enough vectors.  Don't bother trying
+	 * a single vectors for any other error:
+	 */
+	if (nvec < 0 && nvec != -ENOSPC)
+		return nvec;
 
 	/*
-	 * Try to enable per-port MSI-X.  If the host is not capable
-	 * fall back to single MSI before finally attempting single
-	 * MSI-X.
+	 * If the host is not capable of supporting per-port vectors, fall
+	 * back to single MSI before finally attempting single MSI-X.
 	 */
-	nvec = ahci_init_msix(pdev, n_ports, hpriv, AHCI_HFLAG_MULTI_MSIX);
-	if (nvec >= 0)
+	nvec = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+	if (nvec == 1)
 		return nvec;
-
-	nvec = ahci_init_msi(pdev, n_ports, hpriv);
-	if (nvec >= 0)
-		return nvec;
-
-	/* try single-msix */
-	nvec = ahci_init_msix(pdev, n_ports, hpriv, 0);
-	if (nvec >= 0)
-		return nvec;
-
-	/* legacy intx interrupts */
-	pci_intx(pdev, 1);
-	hpriv->irq = pdev->irq;
-
-	return 0;
+	return pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
 }
 
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -1698,11 +1612,12 @@
 	if (!host)
 		return -ENOMEM;
 	host->private_data = hpriv;
-	hpriv->msix = devm_kzalloc(&pdev->dev,
-			sizeof(struct msix_entry) * n_ports, GFP_KERNEL);
-	if (!hpriv->msix)
-		return -ENOMEM;
-	ahci_init_interrupts(pdev, n_ports, hpriv);
+
+	if (ahci_init_msi(pdev, n_ports, hpriv) < 0) {
+		/* legacy intx interrupts */
+		pci_intx(pdev, 1);
+	}
+	hpriv->irq = pdev->irq;
 
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
 		host->flags |= ATA_HOST_PARALLEL_SCAN;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 70b06bc..0cc08f8 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -242,12 +242,10 @@
 	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
 
 #ifdef CONFIG_PCI_MSI
-	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* multiple PCI MSIs */
-	AHCI_HFLAG_MULTI_MSIX		= (1 << 21), /* per-port MSI-X */
+	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* per-port MSI(-X) */
 #else
 	/* compile out MSI infrastructure */
 	AHCI_HFLAG_MULTI_MSI		= 0,
-	AHCI_HFLAG_MULTI_MSIX		= 0,
 #endif
 	AHCI_HFLAG_WAKE_BEFORE_STOP	= (1 << 22), /* wake before DMA stop */
 
@@ -351,7 +349,6 @@
 	 * the PHY position in this array.
 	 */
 	struct phy		**phys;
-	struct msix_entry	*msix;		/* Optional MSI-X support */
 	unsigned		nports;		/* Number of ports */
 	void			*plat_data;	/* Other platform data */
 	unsigned int		irq;		/* interrupt line */
@@ -362,22 +359,11 @@
 	 */
 	void			(*start_engine)(struct ata_port *ap);
 	irqreturn_t 		(*irq_handler)(int irq, void *dev_instance);
-};
 
-#ifdef CONFIG_PCI_MSI
-static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
-{
-	if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
-		return hpriv->msix[port].vector;
-	else
-		return hpriv->irq + port;
-}
-#else
-static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
-{
-	return hpriv->irq;
-}
-#endif
+	/* only required for per-port MSI(-X) support */
+	int			(*get_irq_vector)(struct ata_host *host,
+						  int port);
+};
 
 extern int ahci_ignore_sss;
 
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 7bdee9b..1eba8df 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -30,24 +30,23 @@
 #define PORT_PHY3	0xB0
 #define PORT_PHY4	0xB4
 #define PORT_PHY5	0xB8
+#define PORT_AXICC	0xBC
 #define PORT_TRANS	0xC8
 
 /* port register default value */
 #define AHCI_PORT_PHY_1_CFG	0xa003fffe
 #define AHCI_PORT_TRANS_CFG	0x08000029
+#define AHCI_PORT_AXICC_CFG	0x3fffffff
 
 /* for ls1021a */
 #define LS1021A_PORT_PHY2	0x28183414
 #define LS1021A_PORT_PHY3	0x0e080e06
 #define LS1021A_PORT_PHY4	0x064a080b
 #define LS1021A_PORT_PHY5	0x2aa86470
+#define LS1021A_AXICC_ADDR	0xC0
 
 #define SATA_ECC_DISABLE	0x00020000
 
-/* for ls1043a */
-#define LS1043A_PORT_PHY2	0x28184d1f
-#define LS1043A_PORT_PHY3	0x0e081509
-
 enum ahci_qoriq_type {
 	AHCI_LS1021A,
 	AHCI_LS1043A,
@@ -137,7 +136,7 @@
 	.hardreset	= ahci_qoriq_hardreset,
 };
 
-static struct ata_port_info ahci_qoriq_port_info = {
+static const struct ata_port_info ahci_qoriq_port_info = {
 	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
 	.pio_mask	= ATA_PIO4,
 	.udma_mask	= ATA_UDMA6,
@@ -162,18 +161,19 @@
 		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
 		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		writel(AHCI_PORT_AXICC_CFG, reg_base + LS1021A_AXICC_ADDR);
 		break;
 
 	case AHCI_LS1043A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
-		writel(LS1043A_PORT_PHY2, reg_base + PORT_PHY2);
-		writel(LS1043A_PORT_PHY3, reg_base + PORT_PHY3);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
 		break;
 
 	case AHCI_LS2080A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
 		break;
 	}
 
@@ -221,12 +221,6 @@
 	if (rc)
 		goto disable_resources;
 
-	/* Workaround for ls2080a */
-	if (qoriq_priv->type == AHCI_LS2080A) {
-		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
-		ahci_qoriq_port_info.flags &= ~ATA_FLAG_NCQ;
-	}
-
 	rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info,
 				     &ahci_qoriq_sht);
 	if (rc)
diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c
index 8ff428f..bc345f2 100644
--- a/drivers/ata/ahci_st.c
+++ b/drivers/ata/ahci_st.c
@@ -147,6 +147,7 @@
 
 static int st_ahci_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct st_ahci_drv_data *drv_data;
 	struct ahci_host_priv *hpriv;
 	int err;
@@ -170,6 +171,9 @@
 
 	st_ahci_configure_oob(hpriv->mmio);
 
+	of_property_read_u32(dev->of_node,
+			     "ports-implemented", &hpriv->force_port_map);
+
 	err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info,
 				      &ahci_platform_sht);
 	if (err) {
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index dcf2c72..0d028ea 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2520,7 +2520,7 @@
 	 */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ahci_port_priv *pp = host->ports[i]->private_data;
-		int irq = ahci_irq_vector(hpriv, i);
+		int irq = hpriv->get_irq_vector(host, i);
 
 		/* Do not receive interrupts sent by dummy ports */
 		if (!pp) {
@@ -2556,10 +2556,15 @@
 	int irq = hpriv->irq;
 	int rc;
 
-	if (hpriv->flags & (AHCI_HFLAG_MULTI_MSI | AHCI_HFLAG_MULTI_MSIX)) {
+	if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
 		if (hpriv->irq_handler)
 			dev_warn(host->dev,
 			         "both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented\n");
+		if (!hpriv->get_irq_vector) {
+			dev_err(host->dev,
+				"AHCI_HFLAG_MULTI_MSI requires ->get_irq_vector!\n");
+			return -EIO;
+		}
 
 		rc = ahci_host_activate_multi_irqs(host, sht);
 	} else {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e207b33..9cceb4a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1159,8 +1159,6 @@
 {
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
-	sdev->no_report_opcodes = 1;
-	sdev->no_write_same = 1;
 
 	/* Schedule policy is determined by ->qc_defer() callback and
 	 * it needs to see every deferred qc.  Set dev_blocked to 1 to
@@ -3282,18 +3280,125 @@
 	return 1;
 }
 
+/**
+ * ata_format_dsm_trim_descr() - SATL Write Same to DSM Trim
+ * @cmd: SCSI command being translated
+ * @trmax: Maximum number of entries that will fit in sector_size bytes.
+ * @sector: Starting sector
+ * @count: Total Range of request in logical sectors
+ *
+ * Rewrite the WRITE SAME descriptor to be a DSM TRIM little-endian formatted
+ * descriptor.
+ *
+ * Upto 64 entries of the format:
+ *   63:48 Range Length
+ *   47:0  LBA
+ *
+ *  Range Length of 0 is ignored.
+ *  LBA's should be sorted order and not overlap.
+ *
+ * NOTE: this is the same format as ADD LBA(S) TO NV CACHE PINNED SET
+ *
+ * Return: Number of bytes copied into sglist.
+ */
+static size_t ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 trmax,
+					u64 sector, u32 count)
+{
+	struct scsi_device *sdp = cmd->device;
+	size_t len = sdp->sector_size;
+	size_t r;
+	__le64 *buf;
+	u32 i = 0;
+	unsigned long flags;
+
+	WARN_ON(len > ATA_SCSI_RBUF_SIZE);
+
+	if (len > ATA_SCSI_RBUF_SIZE)
+		len = ATA_SCSI_RBUF_SIZE;
+
+	spin_lock_irqsave(&ata_scsi_rbuf_lock, flags);
+	buf = ((void *)ata_scsi_rbuf);
+	memset(buf, 0, len);
+	while (i < trmax) {
+		u64 entry = sector |
+			((u64)(count > 0xffff ? 0xffff : count) << 48);
+		buf[i++] = __cpu_to_le64(entry);
+		if (count <= 0xffff)
+			break;
+		count -= 0xffff;
+		sector += 0xffff;
+	}
+	r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len);
+	spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags);
+
+	return r;
+}
+
+/**
+ * ata_format_dsm_trim_descr() - SATL Write Same to ATA SCT Write Same
+ * @cmd: SCSI command being translated
+ * @lba: Starting sector
+ * @num: Number of sectors to be zero'd.
+ *
+ * Rewrite the WRITE SAME payload to be an SCT Write Same formatted
+ * descriptor.
+ * NOTE: Writes a pattern (0's) in the foreground.
+ *
+ * Return: Number of bytes copied into sglist.
+ */
+static size_t ata_format_sct_write_same(struct scsi_cmnd *cmd, u64 lba, u64 num)
+{
+	struct scsi_device *sdp = cmd->device;
+	size_t len = sdp->sector_size;
+	size_t r;
+	u16 *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ata_scsi_rbuf_lock, flags);
+	buf = ((void *)ata_scsi_rbuf);
+
+	put_unaligned_le16(0x0002,  &buf[0]); /* SCT_ACT_WRITE_SAME */
+	put_unaligned_le16(0x0101,  &buf[1]); /* WRITE PTRN FG */
+	put_unaligned_le64(lba,     &buf[2]);
+	put_unaligned_le64(num,     &buf[6]);
+	put_unaligned_le32(0u,      &buf[10]); /* pattern */
+
+	WARN_ON(len > ATA_SCSI_RBUF_SIZE);
+
+	if (len > ATA_SCSI_RBUF_SIZE)
+		len = ATA_SCSI_RBUF_SIZE;
+
+	r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len);
+	spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags);
+
+	return r;
+}
+
+/**
+ * ata_scsi_write_same_xlat() - SATL Write Same to ATA SCT Write Same
+ * @qc: Command to be translated
+ *
+ * Translate a SCSI WRITE SAME command to be either a DSM TRIM command or
+ * an SCT Write Same command.
+ * Based on WRITE SAME has the UNMAP flag
+ *   When set translate to DSM TRIM
+ *   When clear translate to SCT Write Same
+ */
 static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
 {
 	struct ata_taskfile *tf = &qc->tf;
 	struct scsi_cmnd *scmd = qc->scsicmd;
+	struct scsi_device *sdp = scmd->device;
+	size_t len = sdp->sector_size;
 	struct ata_device *dev = qc->dev;
 	const u8 *cdb = scmd->cmnd;
 	u64 block;
 	u32 n_block;
+	const u32 trmax = len >> 3;
 	u32 size;
-	void *buf;
 	u16 fp;
 	u8 bp = 0xff;
+	u8 unmap = cdb[1] & 0x8;
 
 	/* we may not issue DMA commands if no DMA mode is set */
 	if (unlikely(!dev->dma_mode))
@@ -3305,11 +3410,26 @@
 	}
 	scsi_16_lba_len(cdb, &block, &n_block);
 
-	/* for now we only support WRITE SAME with the unmap bit set */
-	if (unlikely(!(cdb[1] & 0x8))) {
-		fp = 1;
-		bp = 3;
-		goto invalid_fld;
+	if (unmap) {
+		/* If trim is not enabled the cmd is invalid. */
+		if ((dev->horkage & ATA_HORKAGE_NOTRIM) ||
+		    !ata_id_has_trim(dev->id)) {
+			fp = 1;
+			bp = 3;
+			goto invalid_fld;
+		}
+		/* If the request is too large the cmd is invalid */
+		if (n_block > 0xffff * trmax) {
+			fp = 2;
+			goto invalid_fld;
+		}
+	} else {
+		/* If write same is not available the cmd is invalid */
+		if (!ata_id_sct_write_same(dev->id)) {
+			fp = 1;
+			bp = 3;
+			goto invalid_fld;
+		}
 	}
 
 	/*
@@ -3319,32 +3439,54 @@
 	if (!scsi_sg_count(scmd))
 		goto invalid_param_len;
 
-	buf = page_address(sg_page(scsi_sglist(scmd)));
+	/*
+	 * size must match sector size in bytes
+	 * For DATA SET MANAGEMENT TRIM in ACS-2 nsect (aka count)
+	 * is defined as number of 512 byte blocks to be transferred.
+	 */
+	if (unmap) {
+		size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
+		if (size != len)
+			goto invalid_param_len;
 
-	if (n_block <= 65535 * ATA_MAX_TRIM_RNUM) {
-		size = ata_set_lba_range_entries(buf, ATA_MAX_TRIM_RNUM, block, n_block);
+		if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
+			/* Newer devices support queued TRIM commands */
+			tf->protocol = ATA_PROT_NCQ;
+			tf->command = ATA_CMD_FPDMA_SEND;
+			tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
+			tf->nsect = qc->tag << 3;
+			tf->hob_feature = (size / 512) >> 8;
+			tf->feature = size / 512;
+
+			tf->auxiliary = 1;
+		} else {
+			tf->protocol = ATA_PROT_DMA;
+			tf->hob_feature = 0;
+			tf->feature = ATA_DSM_TRIM;
+			tf->hob_nsect = (size / 512) >> 8;
+			tf->nsect = size / 512;
+			tf->command = ATA_CMD_DSM;
+		}
 	} else {
-		fp = 2;
-		goto invalid_fld;
-	}
+		size = ata_format_sct_write_same(scmd, block, n_block);
+		if (size != len)
+			goto invalid_param_len;
 
-	if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
-		/* Newer devices support queued TRIM commands */
-		tf->protocol = ATA_PROT_NCQ;
-		tf->command = ATA_CMD_FPDMA_SEND;
-		tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
-		tf->nsect = qc->tag << 3;
-		tf->hob_feature = (size / 512) >> 8;
-		tf->feature = size / 512;
-
-		tf->auxiliary = 1;
-	} else {
-		tf->protocol = ATA_PROT_DMA;
 		tf->hob_feature = 0;
-		tf->feature = ATA_DSM_TRIM;
-		tf->hob_nsect = (size / 512) >> 8;
-		tf->nsect = size / 512;
-		tf->command = ATA_CMD_DSM;
+		tf->feature = 0;
+		tf->hob_nsect = 0;
+		tf->nsect = 1;
+		tf->lbah = 0;
+		tf->lbam = 0;
+		tf->lbal = ATA_CMD_STANDBYNOW1;
+		tf->hob_lbah = 0;
+		tf->hob_lbam = 0;
+		tf->hob_lbal = 0;
+		tf->device = ATA_CMD_STANDBYNOW1;
+		tf->protocol = ATA_PROT_DMA;
+		tf->command = ATA_CMD_WRITE_LOG_DMA_EXT;
+		if (unlikely(dev->flags & ATA_DFLAG_PIO))
+			tf->command = ATA_CMD_WRITE_LOG_EXT;
 	}
 
 	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
@@ -3368,6 +3510,76 @@
 }
 
 /**
+ *	ata_scsiop_maint_in - Simulate a subset of MAINTENANCE_IN
+ *	@args: device MAINTENANCE_IN data / SCSI command of interest.
+ *	@rbuf: Response buffer, to which simulated SCSI cmd output is sent.
+ *
+ *	Yields a subset to satisfy scsi_report_opcode()
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+static unsigned int ata_scsiop_maint_in(struct ata_scsi_args *args, u8 *rbuf)
+{
+	struct ata_device *dev = args->dev;
+	u8 *cdb = args->cmd->cmnd;
+	u8 supported = 0;
+	unsigned int err = 0;
+
+	if (cdb[2] != 1) {
+		ata_dev_warn(dev, "invalid command format %d\n", cdb[2]);
+		err = 2;
+		goto out;
+	}
+	switch (cdb[3]) {
+	case INQUIRY:
+	case MODE_SENSE:
+	case MODE_SENSE_10:
+	case READ_CAPACITY:
+	case SERVICE_ACTION_IN_16:
+	case REPORT_LUNS:
+	case REQUEST_SENSE:
+	case SYNCHRONIZE_CACHE:
+	case REZERO_UNIT:
+	case SEEK_6:
+	case SEEK_10:
+	case TEST_UNIT_READY:
+	case SEND_DIAGNOSTIC:
+	case MAINTENANCE_IN:
+	case READ_6:
+	case READ_10:
+	case READ_16:
+	case WRITE_6:
+	case WRITE_10:
+	case WRITE_16:
+	case ATA_12:
+	case ATA_16:
+	case VERIFY:
+	case VERIFY_16:
+	case MODE_SELECT:
+	case MODE_SELECT_10:
+	case START_STOP:
+		supported = 3;
+		break;
+	case WRITE_SAME_16:
+		if (!ata_id_sct_write_same(dev->id))
+			break;
+		/* fallthrough: if SCT ... only enable for ZBC */
+	case ZBC_IN:
+	case ZBC_OUT:
+		if (ata_id_zoned_cap(dev->id) ||
+		    dev->class == ATA_DEV_ZAC)
+			supported = 3;
+		break;
+	default:
+		break;
+	}
+out:
+	rbuf[1] = supported; /* supported */
+	return err;
+}
+
+/**
  *	ata_scsi_report_zones_complete - convert ATA output
  *	@qc: command structure returning the data
  *
@@ -3610,7 +3822,7 @@
 {
 	struct ata_taskfile *tf = &qc->tf;
 	struct ata_device *dev = qc->dev;
-	char mpage[CACHE_MPAGE_LEN];
+	u8 mpage[CACHE_MPAGE_LEN];
 	u8 wce;
 	int i;
 
@@ -3666,7 +3878,7 @@
 			       const u8 *buf, int len, u16 *fp)
 {
 	struct ata_device *dev = qc->dev;
-	char mpage[CONTROL_MPAGE_LEN];
+	u8 mpage[CONTROL_MPAGE_LEN];
 	u8 d_sense;
 	int i;
 
@@ -3701,8 +3913,6 @@
 		dev->flags |= ATA_DFLAG_D_SENSE;
 	else
 		dev->flags &= ~ATA_DFLAG_D_SENSE;
-	qc->scsicmd->result = SAM_STAT_GOOD;
-	qc->scsicmd->scsi_done(qc->scsicmd);
 	return 0;
 }
 
@@ -3829,6 +4039,8 @@
 		if (ata_mselect_control(qc, p, pg_len, &fp) < 0) {
 			fp += hdr_len + bd_len;
 			goto invalid_param;
+		} else {
+			goto skip; /* No ATA command to send */
 		}
 		break;
 	default:		/* invalid page code */
@@ -4147,6 +4359,13 @@
 			ata_scsi_invalid_field(dev, cmd, 1);
 		break;
 
+	case MAINTENANCE_IN:
+		if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES)
+			ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in);
+		else
+			ata_scsi_invalid_field(dev, cmd, 1);
+		break;
+
 	/* all other commands */
 	default:
 		ata_scsi_set_sense(dev, cmd, ILLEGAL_REQUEST, 0x20, 0x0);
@@ -4179,7 +4398,6 @@
 		shost->max_lun = 1;
 		shost->max_channel = 1;
 		shost->max_cmd_len = 16;
-		shost->no_write_same = 1;
 
 		/* Schedule policy is determined by ->qc_defer()
 		 * callback and it needs to see every deferred qc.
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 9f27b14..1611e0e 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -347,10 +347,8 @@
 
 	field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
 	fields.mode = devm_regmap_field_alloc(dev, smc, field);
-	if (IS_ERR(fields.mode))
-		return PTR_ERR(fields.mode);
 
-	return 0;
+	return PTR_ERR_OR_ZERO(fields.mode);
 }
 
 static int pata_at91_probe(struct platform_device *pdev)
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 2724595..475a006 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -152,8 +152,7 @@
 		div = 8;
 	T = (int)((1000000000000LL * div) / octeon_get_io_clock_rate());
 
-	if (ata_timing_compute(dev, dev->pio_mode, &timing, T, T))
-		BUG();
+	BUG_ON(ata_timing_compute(dev, dev->pio_mode, &timing, T, T));
 
 	t1 = timing.setup;
 	if (t1)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 745489a..efc48bf 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1727,15 +1727,13 @@
 		return -ENOMEM;
 	ap->private_data = pp;
 
-	pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
+	pp->crqb = dma_pool_zalloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
 	if (!pp->crqb)
 		return -ENOMEM;
-	memset(pp->crqb, 0, MV_CRQB_Q_SZ);
 
-	pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma);
+	pp->crpb = dma_pool_zalloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma);
 	if (!pp->crpb)
 		goto out_port_free_dma_mem;
-	memset(pp->crpb, 0, MV_CRPB_Q_SZ);
 
 	/* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
 	if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h
deleted file mode 100644
index cf14f2f..0000000
--- a/include/asm-generic/libata-portmap.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_GENERIC_LIBATA_PORTMAP_H
-#define __ASM_GENERIC_LIBATA_PORTMAP_H
-
-#define ATA_PRIMARY_IRQ(dev)	14
-#define ATA_SECONDARY_IRQ(dev)	15
-
-#endif
diff --git a/include/linux/ata.h b/include/linux/ata.h
index adbc812..fdb18036 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -105,6 +105,7 @@
 	ATA_ID_CFA_KEY_MGMT	= 162,
 	ATA_ID_CFA_MODES	= 163,
 	ATA_ID_DATA_SET_MGMT	= 169,
+	ATA_ID_SCT_CMD_XPORT	= 206,
 	ATA_ID_ROT_SPEED	= 217,
 	ATA_ID_PIO4		= (1 << 1),
 
@@ -789,6 +790,48 @@
 }
 
 /**
+ *
+ * Word: 206 - SCT Command Transport
+ *    15:12 - Vendor Specific
+ *     11:6 - Reserved
+ *        5 - SCT Command Transport Data Tables supported
+ *        4 - SCT Command Transport Features Control supported
+ *        3 - SCT Command Transport Error Recovery Control supported
+ *        2 - SCT Command Transport Write Same supported
+ *        1 - SCT Command Transport Long Sector Access supported
+ *        0 - SCT Command Transport supported
+ */
+static inline bool ata_id_sct_data_tables(const u16 *id)
+{
+	return id[ATA_ID_SCT_CMD_XPORT] & (1 << 5) ? true : false;
+}
+
+static inline bool ata_id_sct_features_ctrl(const u16 *id)
+{
+	return id[ATA_ID_SCT_CMD_XPORT] & (1 << 4) ? true : false;
+}
+
+static inline bool ata_id_sct_error_recovery_ctrl(const u16 *id)
+{
+	return id[ATA_ID_SCT_CMD_XPORT] & (1 << 3) ? true : false;
+}
+
+static inline bool ata_id_sct_write_same(const u16 *id)
+{
+	return id[ATA_ID_SCT_CMD_XPORT] & (1 << 2) ? true : false;
+}
+
+static inline bool ata_id_sct_long_sector_access(const u16 *id)
+{
+	return id[ATA_ID_SCT_CMD_XPORT] & (1 << 1) ? true : false;
+}
+
+static inline bool ata_id_sct_supported(const u16 *id)
+{
+	return id[ATA_ID_SCT_CMD_XPORT] & (1 << 0) ? true : false;
+}
+
+/**
  *	ata_id_major_version	-	get ATA level of drive
  *	@id: Identify data
  *
@@ -1071,32 +1114,6 @@
 #endif
 }
 
-/*
- * Write LBA Range Entries to the buffer that will cover the extent from
- * sector to sector + count.  This is used for TRIM and for ADD LBA(S)
- * TO NV CACHE PINNED SET.
- */
-static inline unsigned ata_set_lba_range_entries(void *_buffer,
-		unsigned num, u64 sector, unsigned long count)
-{
-	__le64 *buffer = _buffer;
-	unsigned i = 0, used_bytes;
-
-	while (i < num) {
-		u64 entry = sector |
-			((u64)(count > 0xffff ? 0xffff : count) << 48);
-		buffer[i++] = __cpu_to_le64(entry);
-		if (count <= 0xffff)
-			break;
-		count -= 0xffff;
-		sector += 0xffff;
-	}
-
-	used_bytes = ALIGN(i * 8, 512);
-	memset(buffer + i, 0, used_bytes - i * 8);
-	return used_bytes;
-}
-
 static inline bool ata_ok(u8 status)
 {
 	return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e37d4f9..616eef4 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -46,7 +46,8 @@
 #ifdef CONFIG_ATA_NONSTANDARD
 #include <asm/libata-portmap.h>
 #else
-#include <asm-generic/libata-portmap.h>
+#define ATA_PRIMARY_IRQ(dev)	14
+#define ATA_SECONDARY_IRQ(dev)	15
 #endif
 
 /*