| /* |
| * Copyright (C) ST-Ericsson SA 2011 |
| * |
| * Author: BIBEK BASU <bibek.basu@stericsson.com> |
| * License terms: GNU General Public License (GPL) version 2 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/ab8500.h> |
| #include <linux/mfd/abx500.h> |
| #include <linux/mfd/ab8500/gpio.h> |
| |
| /* |
| * GPIO registers offset |
| * Bank: 0x10 |
| */ |
| #define AB8500_GPIO_SEL1_REG 0x00 |
| #define AB8500_GPIO_SEL2_REG 0x01 |
| #define AB8500_GPIO_SEL3_REG 0x02 |
| #define AB8500_GPIO_SEL4_REG 0x03 |
| #define AB8500_GPIO_SEL5_REG 0x04 |
| #define AB8500_GPIO_SEL6_REG 0x05 |
| |
| #define AB8500_GPIO_DIR1_REG 0x10 |
| #define AB8500_GPIO_DIR2_REG 0x11 |
| #define AB8500_GPIO_DIR3_REG 0x12 |
| #define AB8500_GPIO_DIR4_REG 0x13 |
| #define AB8500_GPIO_DIR5_REG 0x14 |
| #define AB8500_GPIO_DIR6_REG 0x15 |
| |
| #define AB8500_GPIO_OUT1_REG 0x20 |
| #define AB8500_GPIO_OUT2_REG 0x21 |
| #define AB8500_GPIO_OUT3_REG 0x22 |
| #define AB8500_GPIO_OUT4_REG 0x23 |
| #define AB8500_GPIO_OUT5_REG 0x24 |
| #define AB8500_GPIO_OUT6_REG 0x25 |
| |
| #define AB8500_GPIO_PUD1_REG 0x30 |
| #define AB8500_GPIO_PUD2_REG 0x31 |
| #define AB8500_GPIO_PUD3_REG 0x32 |
| #define AB8500_GPIO_PUD4_REG 0x33 |
| #define AB8500_GPIO_PUD5_REG 0x34 |
| #define AB8500_GPIO_PUD6_REG 0x35 |
| |
| #define AB8500_GPIO_IN1_REG 0x40 |
| #define AB8500_GPIO_IN2_REG 0x41 |
| #define AB8500_GPIO_IN3_REG 0x42 |
| #define AB8500_GPIO_IN4_REG 0x43 |
| #define AB8500_GPIO_IN5_REG 0x44 |
| #define AB8500_GPIO_IN6_REG 0x45 |
| #define AB8500_GPIO_ALTFUN_REG 0x45 |
| #define ALTFUN_REG_INDEX 6 |
| #define AB8500_NUM_GPIO 42 |
| #define AB8500_NUM_VIR_GPIO_IRQ 16 |
| |
| enum ab8500_gpio_action { |
| NONE, |
| STARTUP, |
| SHUTDOWN, |
| MASK, |
| UNMASK |
| }; |
| |
| struct ab8500_gpio { |
| struct gpio_chip chip; |
| struct ab8500 *parent; |
| struct device *dev; |
| struct mutex lock; |
| u32 irq_base; |
| enum ab8500_gpio_action irq_action; |
| u16 rising; |
| u16 falling; |
| }; |
| /** |
| * to_ab8500_gpio() - get the pointer to ab8500_gpio |
| * @chip: Member of the structure ab8500_gpio |
| */ |
| static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip) |
| { |
| return container_of(chip, struct ab8500_gpio, chip); |
| } |
| |
| static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg, |
| unsigned offset, int val) |
| { |
| struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); |
| u8 pos = offset % 8; |
| int ret; |
| |
| reg = reg + (offset / 8); |
| ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev, |
| AB8500_MISC, reg, 1 << pos, val << pos); |
| if (ret < 0) |
| dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); |
| return ret; |
| } |
| /** |
| * ab8500_gpio_get() - Get the particular GPIO value |
| * @chip: Gpio device |
| * @offset: GPIO number to read |
| */ |
| static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); |
| u8 mask = 1 << (offset % 8); |
| u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8); |
| int ret; |
| u8 data; |
| ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC, |
| reg, &data); |
| if (ret < 0) { |
| dev_err(ab8500_gpio->dev, "%s read failed\n", __func__); |
| return ret; |
| } |
| return (data & mask) >> (offset % 8); |
| } |
| |
| static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| { |
| struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); |
| int ret; |
| /* Write the data */ |
| ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1); |
| if (ret < 0) |
| dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); |
| } |
| |
| static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, |
| int val) |
| { |
| int ret; |
| /* set direction as output */ |
| ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1); |
| if (ret < 0) |
| return ret; |
| /* disable pull down */ |
| ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1); |
| if (ret < 0) |
| return ret; |
| /* set the output as 1 or 0 */ |
| return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); |
| |
| } |
| |
| static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| /* set the register as input */ |
| return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0); |
| } |
| |
| static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| /* |
| * Only some GPIOs are interrupt capable, and they are |
| * organized in discontiguous clusters: |
| * |
| * GPIO6 to GPIO13 |
| * GPIO24 and GPIO25 |
| * GPIO36 to GPIO41 |
| */ |
| static struct ab8500_gpio_irq_cluster { |
| int start; |
| int end; |
| } clusters[] = { |
| {.start = 6, .end = 13}, |
| {.start = 24, .end = 25}, |
| {.start = 36, .end = 41}, |
| }; |
| struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); |
| int base = ab8500_gpio->irq_base; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(clusters); i++) { |
| struct ab8500_gpio_irq_cluster *cluster = &clusters[i]; |
| |
| if (offset >= cluster->start && offset <= cluster->end) |
| return base + offset - cluster->start; |
| |
| /* Advance by the number of gpios in this cluster */ |
| base += cluster->end - cluster->start + 1; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static struct gpio_chip ab8500gpio_chip = { |
| .label = "ab8500_gpio", |
| .owner = THIS_MODULE, |
| .direction_input = ab8500_gpio_direction_input, |
| .get = ab8500_gpio_get, |
| .direction_output = ab8500_gpio_direction_output, |
| .set = ab8500_gpio_set, |
| .to_irq = ab8500_gpio_to_irq, |
| }; |
| |
| static unsigned int irq_to_rising(unsigned int irq) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| int offset = irq - ab8500_gpio->irq_base; |
| int new_irq = offset + AB8500_INT_GPIO6R |
| + ab8500_gpio->parent->irq_base; |
| return new_irq; |
| } |
| |
| static unsigned int irq_to_falling(unsigned int irq) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| int offset = irq - ab8500_gpio->irq_base; |
| int new_irq = offset + AB8500_INT_GPIO6F |
| + ab8500_gpio->parent->irq_base; |
| return new_irq; |
| |
| } |
| |
| static unsigned int rising_to_irq(unsigned int irq, void *dev) |
| { |
| struct ab8500_gpio *ab8500_gpio = dev; |
| int offset = irq - AB8500_INT_GPIO6R |
| - ab8500_gpio->parent->irq_base ; |
| int new_irq = offset + ab8500_gpio->irq_base; |
| return new_irq; |
| } |
| |
| static unsigned int falling_to_irq(unsigned int irq, void *dev) |
| { |
| struct ab8500_gpio *ab8500_gpio = dev; |
| int offset = irq - AB8500_INT_GPIO6F |
| - ab8500_gpio->parent->irq_base ; |
| int new_irq = offset + ab8500_gpio->irq_base; |
| return new_irq; |
| |
| } |
| |
| /* |
| * IRQ handler |
| */ |
| |
| static irqreturn_t handle_rising(int irq, void *dev) |
| { |
| |
| handle_nested_irq(rising_to_irq(irq , dev)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t handle_falling(int irq, void *dev) |
| { |
| |
| handle_nested_irq(falling_to_irq(irq, dev)); |
| return IRQ_HANDLED; |
| } |
| |
| static void ab8500_gpio_irq_lock(unsigned int irq) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| mutex_lock(&ab8500_gpio->lock); |
| } |
| |
| static void ab8500_gpio_irq_sync_unlock(unsigned int irq) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| int offset = irq - ab8500_gpio->irq_base; |
| bool rising = ab8500_gpio->rising & BIT(offset); |
| bool falling = ab8500_gpio->falling & BIT(offset); |
| int ret; |
| |
| switch (ab8500_gpio->irq_action) { |
| case STARTUP: |
| if (rising) |
| ret = request_threaded_irq(irq_to_rising(irq), |
| NULL, handle_rising, |
| IRQF_TRIGGER_RISING, |
| "ab8500-gpio-r", ab8500_gpio); |
| if (falling) |
| ret = request_threaded_irq(irq_to_falling(irq), |
| NULL, handle_falling, |
| IRQF_TRIGGER_FALLING, |
| "ab8500-gpio-f", ab8500_gpio); |
| break; |
| case SHUTDOWN: |
| if (rising) |
| free_irq(irq_to_rising(irq), ab8500_gpio); |
| if (falling) |
| free_irq(irq_to_falling(irq), ab8500_gpio); |
| break; |
| case MASK: |
| if (rising) |
| disable_irq(irq_to_rising(irq)); |
| if (falling) |
| disable_irq(irq_to_falling(irq)); |
| break; |
| case UNMASK: |
| if (rising) |
| enable_irq(irq_to_rising(irq)); |
| if (falling) |
| enable_irq(irq_to_falling(irq)); |
| break; |
| case NONE: |
| break; |
| } |
| ab8500_gpio->irq_action = NONE; |
| ab8500_gpio->rising &= ~(BIT(offset)); |
| ab8500_gpio->falling &= ~(BIT(offset)); |
| mutex_unlock(&ab8500_gpio->lock); |
| } |
| |
| |
| static void ab8500_gpio_irq_mask(unsigned int irq) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| ab8500_gpio->irq_action = MASK; |
| } |
| |
| static void ab8500_gpio_irq_unmask(unsigned int irq) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| ab8500_gpio->irq_action = UNMASK; |
| } |
| |
| static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| int offset = irq - ab8500_gpio->irq_base; |
| |
| if (type == IRQ_TYPE_EDGE_BOTH) { |
| ab8500_gpio->rising = BIT(offset); |
| ab8500_gpio->falling = BIT(offset); |
| } else if (type == IRQ_TYPE_EDGE_RISING) { |
| ab8500_gpio->rising = BIT(offset); |
| } else { |
| ab8500_gpio->falling = BIT(offset); |
| } |
| return 0; |
| } |
| |
| unsigned int ab8500_gpio_irq_startup(unsigned int irq) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| ab8500_gpio->irq_action = STARTUP; |
| return 0; |
| } |
| |
| void ab8500_gpio_irq_shutdown(unsigned int irq) |
| { |
| struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| ab8500_gpio->irq_action = SHUTDOWN; |
| } |
| |
| static struct irq_chip ab8500_gpio_irq_chip = { |
| .name = "ab8500-gpio", |
| .startup = ab8500_gpio_irq_startup, |
| .shutdown = ab8500_gpio_irq_shutdown, |
| .bus_lock = ab8500_gpio_irq_lock, |
| .bus_sync_unlock = ab8500_gpio_irq_sync_unlock, |
| .mask = ab8500_gpio_irq_mask, |
| .unmask = ab8500_gpio_irq_unmask, |
| .set_type = ab8500_gpio_irq_set_type, |
| }; |
| |
| static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio) |
| { |
| u32 base = ab8500_gpio->irq_base; |
| int irq; |
| |
| for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) { |
| set_irq_chip_data(irq, ab8500_gpio); |
| set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip, |
| handle_simple_irq); |
| set_irq_nested_thread(irq, 1); |
| #ifdef CONFIG_ARM |
| set_irq_flags(irq, IRQF_VALID); |
| #else |
| set_irq_noprobe(irq); |
| #endif |
| } |
| |
| return 0; |
| } |
| |
| static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio) |
| { |
| int base = ab8500_gpio->irq_base; |
| int irq; |
| |
| for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) { |
| #ifdef CONFIG_ARM |
| set_irq_flags(irq, 0); |
| #endif |
| set_irq_chip_and_handler(irq, NULL, NULL); |
| set_irq_chip_data(irq, NULL); |
| } |
| } |
| |
| static int __devinit ab8500_gpio_probe(struct platform_device *pdev) |
| { |
| struct ab8500_platform_data *ab8500_pdata = |
| dev_get_platdata(pdev->dev.parent); |
| struct ab8500_gpio_platform_data *pdata; |
| struct ab8500_gpio *ab8500_gpio; |
| int ret; |
| int i; |
| |
| pdata = ab8500_pdata->gpio; |
| if (!pdata) { |
| dev_err(&pdev->dev, "gpio platform data missing\n"); |
| return -ENODEV; |
| } |
| |
| ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL); |
| if (ab8500_gpio == NULL) { |
| dev_err(&pdev->dev, "failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| ab8500_gpio->dev = &pdev->dev; |
| ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent); |
| ab8500_gpio->chip = ab8500gpio_chip; |
| ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO; |
| ab8500_gpio->chip.dev = &pdev->dev; |
| ab8500_gpio->chip.base = pdata->gpio_base; |
| ab8500_gpio->irq_base = pdata->irq_base; |
| /* initialize the lock */ |
| mutex_init(&ab8500_gpio->lock); |
| /* |
| * AB8500 core will handle and clear the IRQ |
| * configre GPIO based on config-reg value. |
| * These values are for selecting the PINs as |
| * GPIO or alternate function |
| */ |
| for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++) { |
| ret = abx500_set_register_interruptible(ab8500_gpio->dev, |
| AB8500_MISC, i, |
| pdata->config_reg[i]); |
| if (ret < 0) |
| goto out_free; |
| } |
| ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC, |
| AB8500_GPIO_ALTFUN_REG, |
| pdata->config_reg[ALTFUN_REG_INDEX]); |
| if (ret < 0) |
| goto out_free; |
| |
| ret = ab8500_gpio_irq_init(ab8500_gpio); |
| if (ret) |
| goto out_free; |
| ret = gpiochip_add(&ab8500_gpio->chip); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to add gpiochip: %d\n", |
| ret); |
| goto out_rem_irq; |
| } |
| platform_set_drvdata(pdev, ab8500_gpio); |
| return 0; |
| |
| out_rem_irq: |
| ab8500_gpio_irq_remove(ab8500_gpio); |
| out_free: |
| mutex_destroy(&ab8500_gpio->lock); |
| kfree(ab8500_gpio); |
| return ret; |
| } |
| |
| /* |
| * ab8500_gpio_remove() - remove Ab8500-gpio driver |
| * @pdev : Platform device registered |
| */ |
| static int __devexit ab8500_gpio_remove(struct platform_device *pdev) |
| { |
| struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = gpiochip_remove(&ab8500_gpio->chip); |
| if (ret < 0) { |
| dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n", |
| ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, NULL); |
| mutex_destroy(&ab8500_gpio->lock); |
| kfree(ab8500_gpio); |
| |
| return 0; |
| } |
| |
| static struct platform_driver ab8500_gpio_driver = { |
| .driver = { |
| .name = "ab8500-gpio", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ab8500_gpio_probe, |
| .remove = __devexit_p(ab8500_gpio_remove), |
| }; |
| |
| static int __init ab8500_gpio_init(void) |
| { |
| return platform_driver_register(&ab8500_gpio_driver); |
| } |
| arch_initcall(ab8500_gpio_init); |
| |
| static void __exit ab8500_gpio_exit(void) |
| { |
| platform_driver_unregister(&ab8500_gpio_driver); |
| } |
| module_exit(ab8500_gpio_exit); |
| |
| MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>"); |
| MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO"); |
| MODULE_ALIAS("AB8500 GPIO driver"); |
| MODULE_LICENSE("GPL v2"); |