Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"Just minor driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: twl4030-vibra - do not reparent to grandparent
Input: twl6040-vibra - do not reparent to grandparent
Input: twl6040-vibra - ignore return value of schedule_work
Input: twl6040-vibra - fix NULL pointer dereference by removing workqueue
Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay
Input: arizona-haptic - don't assign input_dev parent
Input: clarify we want BTN_TOOL_<name> on proximity
Input: xpad - add Mad Catz FightStick TE 2 VID/PID
Input: gtco - fix crash on detecting device without endpoints
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
index 3f0f5ce..36ea940 100644
--- a/Documentation/input/event-codes.txt
+++ b/Documentation/input/event-codes.txt
@@ -173,6 +173,10 @@
proximity of the device and while the value of the BTN_TOUCH code is 0. If
the input device may be used freely in three dimensions, consider ABS_Z
instead.
+ - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
+ proximity and set to 0 when the tool leaves detectable proximity.
+ BTN_TOOL_<name> signals the type of tool that is currently detected by the
+ hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
* ABS_MT_<name>:
- Used to describe multitouch input events. Please see
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index e8a84d1..1142a93 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -153,6 +153,7 @@
{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
@@ -304,6 +305,7 @@
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
{ USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
+ XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c
index d5994a7..9829363 100644
--- a/drivers/input/misc/arizona-haptics.c
+++ b/drivers/input/misc/arizona-haptics.c
@@ -178,7 +178,6 @@
input_set_drvdata(haptics->input_dev, haptics);
haptics->input_dev->name = "arizona:haptics";
- haptics->input_dev->dev.parent = pdev->dev.parent;
haptics->input_dev->close = arizona_haptics_close;
__set_bit(FF_RUMBLE, haptics->input_dev->ffbit);
diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index 3f02e0e..67aab86 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -353,7 +353,8 @@
if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay))
kpd_delay = 15625;
- if (kpd_delay > 62500 || kpd_delay == 0) {
+ /* Valid range of pwr key trigger delay is 1/64 sec to 2 seconds. */
+ if (kpd_delay > USEC_PER_SEC * 2 || kpd_delay < USEC_PER_SEC / 64) {
dev_err(&pdev->dev, "invalid power key trigger delay\n");
return -EINVAL;
}
@@ -385,8 +386,8 @@
pwr->name = "pmic8xxx_pwrkey";
pwr->phys = "pmic8xxx_pwrkey/input0";
- delay = (kpd_delay << 10) / USEC_PER_SEC;
- delay = 1 + ilog2(delay);
+ delay = (kpd_delay << 6) / USEC_PER_SEC;
+ delay = ilog2(delay);
err = regmap_read(regmap, PON_CNTL_1, &pon_cntl);
if (err < 0) {
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index 10c4e3d..caa5a62 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -222,7 +222,6 @@
info->input_dev->name = "twl4030:vibrator";
info->input_dev->id.version = 1;
- info->input_dev->dev.parent = pdev->dev.parent;
info->input_dev->close = twl4030_vibra_close;
__set_bit(FF_RUMBLE, info->input_dev->ffbit);
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index ea63fad..53e33fa 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -45,7 +45,6 @@
struct vibra_info {
struct device *dev;
struct input_dev *input_dev;
- struct workqueue_struct *workqueue;
struct work_struct play_work;
struct mutex mutex;
int irq;
@@ -213,11 +212,7 @@
info->strong_speed = effect->u.rumble.strong_magnitude;
info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
- ret = queue_work(info->workqueue, &info->play_work);
- if (!ret) {
- dev_info(&input->dev, "work is already on queue\n");
- return ret;
- }
+ schedule_work(&info->play_work);
return 0;
}
@@ -362,7 +357,6 @@
info->input_dev->name = "twl6040:vibrator";
info->input_dev->id.version = 1;
- info->input_dev->dev.parent = pdev->dev.parent;
info->input_dev->close = twl6040_vibra_close;
__set_bit(FF_RUMBLE, info->input_dev->ffbit);
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 3a7f3a4..7c18249 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -858,6 +858,14 @@
goto err_free_buf;
}
+ /* Sanity check that a device has an endpoint */
+ if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) {
+ dev_err(&usbinterface->dev,
+ "Invalid number of endpoints\n");
+ error = -EINVAL;
+ goto err_free_urb;
+ }
+
/*
* The endpoint is always altsetting 0, we know this since we know
* this device only has one interrupt endpoint
@@ -879,7 +887,7 @@
* HID report descriptor
*/
if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
- HID_DEVICE_TYPE, &hid_desc) != 0){
+ HID_DEVICE_TYPE, &hid_desc) != 0) {
dev_err(&usbinterface->dev,
"Can't retrieve exta USB descriptor to get hid report descriptor length\n");
error = -EIO;