| /* |
| * xHCI host controller driver PCI Bus Glue. |
| * |
| * Copyright (C) 2008 Intel Corp. |
| * |
| * Author: Sarah Sharp |
| * Some code borrowed from the Linux EHCI driver. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/acpi.h> |
| |
| #include "xhci.h" |
| #include "xhci-trace.h" |
| |
| #define SSIC_PORT_NUM 2 |
| #define SSIC_PORT_CFG2 0x880c |
| #define SSIC_PORT_CFG2_OFFSET 0x30 |
| #define PROG_DONE (1 << 30) |
| #define SSIC_PORT_UNUSED (1 << 31) |
| |
| /* Device for a quirk */ |
| #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 |
| #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 |
| #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 |
| #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 |
| |
| #define PCI_VENDOR_ID_ETRON 0x1b6f |
| #define PCI_DEVICE_ID_EJ168 0x7023 |
| |
| #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 |
| #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 |
| #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1 |
| #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 |
| #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f |
| #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f |
| #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 |
| #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 |
| #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 |
| #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 |
| |
| #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 |
| #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba |
| #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb |
| #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc |
| |
| #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 |
| |
| static const char hcd_name[] = "xhci_hcd"; |
| |
| static struct hc_driver __read_mostly xhci_pci_hc_driver; |
| |
| static int xhci_pci_setup(struct usb_hcd *hcd); |
| |
| static const struct xhci_driver_overrides xhci_pci_overrides __initconst = { |
| .reset = xhci_pci_setup, |
| }; |
| |
| /* called after powerup, by probe or system-pm "wakeup" */ |
| static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) |
| { |
| /* |
| * TODO: Implement finding debug ports later. |
| * TODO: see if there are any quirks that need to be added to handle |
| * new extended capabilities. |
| */ |
| |
| /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ |
| if (!pci_set_mwi(pdev)) |
| xhci_dbg(xhci, "MWI active\n"); |
| |
| xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); |
| return 0; |
| } |
| |
| static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| |
| /* Look for vendor-specific quirks */ |
| if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && |
| (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || |
| pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { |
| if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && |
| pdev->revision == 0x0) { |
| xhci->quirks |= XHCI_RESET_EP_QUIRK; |
| xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
| "QUIRK: Fresco Logic xHC needs configure" |
| " endpoint cmd after reset endpoint"); |
| } |
| if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && |
| pdev->revision == 0x4) { |
| xhci->quirks |= XHCI_SLOW_SUSPEND; |
| xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
| "QUIRK: Fresco Logic xHC revision %u" |
| "must be suspended extra slowly", |
| pdev->revision); |
| } |
| if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) |
| xhci->quirks |= XHCI_BROKEN_STREAMS; |
| /* Fresco Logic confirms: all revisions of this chip do not |
| * support MSI, even though some of them claim to in their PCI |
| * capabilities. |
| */ |
| xhci->quirks |= XHCI_BROKEN_MSI; |
| xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
| "QUIRK: Fresco Logic revision %u " |
| "has broken MSI implementation", |
| pdev->revision); |
| xhci->quirks |= XHCI_TRUST_TX_LENGTH; |
| } |
| |
| if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && |
| pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) |
| xhci->quirks |= XHCI_BROKEN_STREAMS; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_NEC) |
| xhci->quirks |= XHCI_NEC_HOST; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) |
| xhci->quirks |= XHCI_AMD_0x96_HOST; |
| |
| /* AMD PLL quirk */ |
| if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) |
| xhci->quirks |= XHCI_AMD_PLL_FIX; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_AMD) |
| xhci->quirks |= XHCI_TRUST_TX_LENGTH; |
| |
| if ((pdev->vendor == PCI_VENDOR_ID_AMD) && |
| ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) || |
| (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) || |
| (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) || |
| (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1))) |
| xhci->quirks |= XHCI_U2_DISABLE_WAKE; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL) { |
| xhci->quirks |= XHCI_LPM_SUPPORT; |
| xhci->quirks |= XHCI_INTEL_HOST; |
| xhci->quirks |= XHCI_AVOID_BEI; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL && |
| pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { |
| xhci->quirks |= XHCI_EP_LIMIT_QUIRK; |
| xhci->limit_active_eps = 64; |
| xhci->quirks |= XHCI_SW_BW_CHECKING; |
| /* |
| * PPT desktop boards DH77EB and DH77DF will power back on after |
| * a few seconds of being shutdown. The fix for this is to |
| * switch the ports from xHCI to EHCI on shutdown. We can't use |
| * DMI information to find those particular boards (since each |
| * vendor will change the board name), so we have to key off all |
| * PPT chipsets. |
| */ |
| xhci->quirks |= XHCI_SPURIOUS_REBOOT; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL && |
| (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) { |
| xhci->quirks |= XHCI_SPURIOUS_REBOOT; |
| xhci->quirks |= XHCI_SPURIOUS_WAKEUP; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL && |
| (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) { |
| xhci->quirks |= XHCI_PME_STUCK_QUIRK; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL && |
| pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { |
| xhci->quirks |= XHCI_SSIC_PORT_UNUSED; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL && |
| (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || |
| pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) |
| xhci->quirks |= XHCI_MISSING_CAS; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_ETRON && |
| pdev->device == PCI_DEVICE_ID_EJ168) { |
| xhci->quirks |= XHCI_RESET_ON_RESUME; |
| xhci->quirks |= XHCI_TRUST_TX_LENGTH; |
| xhci->quirks |= XHCI_BROKEN_STREAMS; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_RENESAS && |
| pdev->device == 0x0015) |
| xhci->quirks |= XHCI_RESET_ON_RESUME; |
| if (pdev->vendor == PCI_VENDOR_ID_VIA) |
| xhci->quirks |= XHCI_RESET_ON_RESUME; |
| |
| /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ |
| if (pdev->vendor == PCI_VENDOR_ID_VIA && |
| pdev->device == 0x3432) |
| xhci->quirks |= XHCI_BROKEN_STREAMS; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && |
| pdev->device == 0x1042) |
| xhci->quirks |= XHCI_BROKEN_STREAMS; |
| if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && |
| pdev->device == 0x1142) |
| xhci->quirks |= XHCI_TRUST_TX_LENGTH; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && |
| pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) |
| xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) |
| xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; |
| |
| if (xhci->quirks & XHCI_RESET_ON_RESUME) |
| xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
| "QUIRK: Resetting on resume"); |
| } |
| |
| #ifdef CONFIG_ACPI |
| static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) |
| { |
| static const guid_t intel_dsm_guid = |
| GUID_INIT(0xac340cb7, 0xe901, 0x45bf, |
| 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23); |
| union acpi_object *obj; |
| |
| obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1, |
| NULL); |
| ACPI_FREE(obj); |
| } |
| #else |
| static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } |
| #endif /* CONFIG_ACPI */ |
| |
| /* called during probe() after chip reset completes */ |
| static int xhci_pci_setup(struct usb_hcd *hcd) |
| { |
| struct xhci_hcd *xhci; |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| int retval; |
| |
| xhci = hcd_to_xhci(hcd); |
| if (!xhci->sbrn) |
| pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); |
| |
| retval = xhci_gen_setup(hcd, xhci_pci_quirks); |
| if (retval) |
| return retval; |
| |
| if (!usb_hcd_is_primary_hcd(hcd)) |
| return 0; |
| |
| xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); |
| |
| /* Find any debug ports */ |
| return xhci_pci_reinit(xhci, pdev); |
| } |
| |
| /* |
| * We need to register our own PCI probe function (instead of the USB core's |
| * function) in order to create a second roothub under xHCI. |
| */ |
| static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| int retval; |
| struct xhci_hcd *xhci; |
| struct hc_driver *driver; |
| struct usb_hcd *hcd; |
| |
| driver = (struct hc_driver *)id->driver_data; |
| |
| /* Prevent runtime suspending between USB-2 and USB-3 initialization */ |
| pm_runtime_get_noresume(&dev->dev); |
| |
| /* Register the USB 2.0 roothub. |
| * FIXME: USB core must know to register the USB 2.0 roothub first. |
| * This is sort of silly, because we could just set the HCD driver flags |
| * to say USB 2.0, but I'm not sure what the implications would be in |
| * the other parts of the HCD code. |
| */ |
| retval = usb_hcd_pci_probe(dev, id); |
| |
| if (retval) |
| goto put_runtime_pm; |
| |
| /* USB 2.0 roothub is stored in the PCI device now. */ |
| hcd = dev_get_drvdata(&dev->dev); |
| xhci = hcd_to_xhci(hcd); |
| xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev, |
| pci_name(dev), hcd); |
| if (!xhci->shared_hcd) { |
| retval = -ENOMEM; |
| goto dealloc_usb2_hcd; |
| } |
| |
| retval = usb_add_hcd(xhci->shared_hcd, dev->irq, |
| IRQF_SHARED); |
| if (retval) |
| goto put_usb3_hcd; |
| /* Roothub already marked as USB 3.0 speed */ |
| |
| if (!(xhci->quirks & XHCI_BROKEN_STREAMS) && |
| HCC_MAX_PSA(xhci->hcc_params) >= 4) |
| xhci->shared_hcd->can_do_streams = 1; |
| |
| if (xhci->quirks & XHCI_PME_STUCK_QUIRK) |
| xhci_pme_acpi_rtd3_enable(dev); |
| |
| /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ |
| pm_runtime_put_noidle(&dev->dev); |
| |
| return 0; |
| |
| put_usb3_hcd: |
| usb_put_hcd(xhci->shared_hcd); |
| dealloc_usb2_hcd: |
| usb_hcd_pci_remove(dev); |
| put_runtime_pm: |
| pm_runtime_put_noidle(&dev->dev); |
| return retval; |
| } |
| |
| static void xhci_pci_remove(struct pci_dev *dev) |
| { |
| struct xhci_hcd *xhci; |
| |
| xhci = hcd_to_xhci(pci_get_drvdata(dev)); |
| xhci->xhc_state |= XHCI_STATE_REMOVING; |
| if (xhci->shared_hcd) { |
| usb_remove_hcd(xhci->shared_hcd); |
| usb_put_hcd(xhci->shared_hcd); |
| } |
| |
| /* Workaround for spurious wakeups at shutdown with HSW */ |
| if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) |
| pci_set_power_state(dev, PCI_D3hot); |
| |
| usb_hcd_pci_remove(dev); |
| } |
| |
| #ifdef CONFIG_PM |
| /* |
| * In some Intel xHCI controllers, in order to get D3 working, |
| * through a vendor specific SSIC CONFIG register at offset 0x883c, |
| * SSIC PORT need to be marked as "unused" before putting xHCI |
| * into D3. After D3 exit, the SSIC port need to be marked as "used". |
| * Without this change, xHCI might not enter D3 state. |
| */ |
| static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| u32 val; |
| void __iomem *reg; |
| int i; |
| |
| for (i = 0; i < SSIC_PORT_NUM; i++) { |
| reg = (void __iomem *) xhci->cap_regs + |
| SSIC_PORT_CFG2 + |
| i * SSIC_PORT_CFG2_OFFSET; |
| |
| /* Notify SSIC that SSIC profile programming is not done. */ |
| val = readl(reg) & ~PROG_DONE; |
| writel(val, reg); |
| |
| /* Mark SSIC port as unused(suspend) or used(resume) */ |
| val = readl(reg); |
| if (suspend) |
| val |= SSIC_PORT_UNUSED; |
| else |
| val &= ~SSIC_PORT_UNUSED; |
| writel(val, reg); |
| |
| /* Notify SSIC that SSIC profile programming is done */ |
| val = readl(reg) | PROG_DONE; |
| writel(val, reg); |
| readl(reg); |
| } |
| } |
| |
| /* |
| * Make sure PME works on some Intel xHCI controllers by writing 1 to clear |
| * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 |
| */ |
| static void xhci_pme_quirk(struct usb_hcd *hcd) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| void __iomem *reg; |
| u32 val; |
| |
| reg = (void __iomem *) xhci->cap_regs + 0x80a4; |
| val = readl(reg); |
| writel(val | BIT(28), reg); |
| readl(reg); |
| } |
| |
| static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| int ret; |
| |
| /* |
| * Systems with the TI redriver that loses port status change events |
| * need to have the registers polled during D3, so avoid D3cold. |
| */ |
| if (xhci->quirks & XHCI_COMP_MODE_QUIRK) |
| pci_d3cold_disable(pdev); |
| |
| if (xhci->quirks & XHCI_PME_STUCK_QUIRK) |
| xhci_pme_quirk(hcd); |
| |
| if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) |
| xhci_ssic_port_unused_quirk(hcd, true); |
| |
| ret = xhci_suspend(xhci, do_wakeup); |
| if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) |
| xhci_ssic_port_unused_quirk(hcd, false); |
| |
| return ret; |
| } |
| |
| static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| int retval = 0; |
| |
| /* The BIOS on systems with the Intel Panther Point chipset may or may |
| * not support xHCI natively. That means that during system resume, it |
| * may switch the ports back to EHCI so that users can use their |
| * keyboard to select a kernel from GRUB after resume from hibernate. |
| * |
| * The BIOS is supposed to remember whether the OS had xHCI ports |
| * enabled before resume, and switch the ports back to xHCI when the |
| * BIOS/OS semaphore is written, but we all know we can't trust BIOS |
| * writers. |
| * |
| * Unconditionally switch the ports back to xHCI after a system resume. |
| * It should not matter whether the EHCI or xHCI controller is |
| * resumed first. It's enough to do the switchover in xHCI because |
| * USB core won't notice anything as the hub driver doesn't start |
| * running again until after all the devices (including both EHCI and |
| * xHCI host controllers) have been resumed. |
| */ |
| |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL) |
| usb_enable_intel_xhci_ports(pdev); |
| |
| if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) |
| xhci_ssic_port_unused_quirk(hcd, false); |
| |
| if (xhci->quirks & XHCI_PME_STUCK_QUIRK) |
| xhci_pme_quirk(hcd); |
| |
| retval = xhci_resume(xhci, hibernated); |
| return retval; |
| } |
| #endif /* CONFIG_PM */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* PCI driver selection metadata; PCI hotplugging uses this */ |
| static const struct pci_device_id pci_ids[] = { { |
| /* handle any USB 3.0 xHCI controller */ |
| PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), |
| .driver_data = (unsigned long) &xhci_pci_hc_driver, |
| }, |
| { /* end: all zeroes */ } |
| }; |
| MODULE_DEVICE_TABLE(pci, pci_ids); |
| |
| /* pci driver glue; this is a "new style" PCI driver module */ |
| static struct pci_driver xhci_pci_driver = { |
| .name = (char *) hcd_name, |
| .id_table = pci_ids, |
| |
| .probe = xhci_pci_probe, |
| .remove = xhci_pci_remove, |
| /* suspend and resume implemented later */ |
| |
| .shutdown = usb_hcd_pci_shutdown, |
| #ifdef CONFIG_PM |
| .driver = { |
| .pm = &usb_hcd_pci_pm_ops |
| }, |
| #endif |
| }; |
| |
| static int __init xhci_pci_init(void) |
| { |
| xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); |
| #ifdef CONFIG_PM |
| xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; |
| xhci_pci_hc_driver.pci_resume = xhci_pci_resume; |
| #endif |
| return pci_register_driver(&xhci_pci_driver); |
| } |
| module_init(xhci_pci_init); |
| |
| static void __exit xhci_pci_exit(void) |
| { |
| pci_unregister_driver(&xhci_pci_driver); |
| } |
| module_exit(xhci_pci_exit); |
| |
| MODULE_DESCRIPTION("xHCI PCI Host Controller Driver"); |
| MODULE_LICENSE("GPL"); |