sh: Add support LCDC for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 7850818..a575b38 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/r8a66597.h>
+#include <video/sh_mobile_lcdc.h>
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
#include <cpu/sh7724.h>
@@ -211,14 +212,60 @@
.resource = usb1_host_resources,
};
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+ .ch[0] = {
+ .interface_type = RGB18,
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .clock_divider = 1,
+ .lcd_cfg = {
+ .sync = 0, /* hsync and vsync are active low */
+ },
+ .lcd_size_cfg = { /* 7.0 inch */
+ .width = 152,
+ .height = 91,
+ },
+ .board_cfg = {
+ },
+ }
+};
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000,
+ .end = 0xfe941fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 106,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ .resource = lcdc_resources,
+ .dev = {
+ .platform_data = &lcdc_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_LCDC,
+ },
+};
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
&sh_eth_device,
&usb0_host_device,
&usb1_host_device, /* USB1 host support */
+ &lcdc_device,
};
+#define PORT_HIZA 0xA4050158
static int __init devices_setup(void)
{
/* enable SCIFA0 */
@@ -262,6 +309,68 @@
ctrl_outw(0x0600, 0xa40501d4);
ctrl_outw(0x0600, 0xa4050192);
+ /* enable LCDC */
+ gpio_request(GPIO_FN_LCDD23, NULL);
+ gpio_request(GPIO_FN_LCDD22, NULL);
+ gpio_request(GPIO_FN_LCDD21, NULL);
+ gpio_request(GPIO_FN_LCDD20, NULL);
+ gpio_request(GPIO_FN_LCDD19, NULL);
+ gpio_request(GPIO_FN_LCDD18, NULL);
+ gpio_request(GPIO_FN_LCDD17, NULL);
+ gpio_request(GPIO_FN_LCDD16, NULL);
+ gpio_request(GPIO_FN_LCDD15, NULL);
+ gpio_request(GPIO_FN_LCDD14, NULL);
+ gpio_request(GPIO_FN_LCDD13, NULL);
+ gpio_request(GPIO_FN_LCDD12, NULL);
+ gpio_request(GPIO_FN_LCDD11, NULL);
+ gpio_request(GPIO_FN_LCDD10, NULL);
+ gpio_request(GPIO_FN_LCDD9, NULL);
+ gpio_request(GPIO_FN_LCDD8, NULL);
+ gpio_request(GPIO_FN_LCDD7, NULL);
+ gpio_request(GPIO_FN_LCDD6, NULL);
+ gpio_request(GPIO_FN_LCDD5, NULL);
+ gpio_request(GPIO_FN_LCDD4, NULL);
+ gpio_request(GPIO_FN_LCDD3, NULL);
+ gpio_request(GPIO_FN_LCDD2, NULL);
+ gpio_request(GPIO_FN_LCDD1, NULL);
+ gpio_request(GPIO_FN_LCDD0, NULL);
+ gpio_request(GPIO_FN_LCDDISP, NULL);
+ gpio_request(GPIO_FN_LCDHSYN, NULL);
+ gpio_request(GPIO_FN_LCDDCK, NULL);
+ gpio_request(GPIO_FN_LCDVSYN, NULL);
+ gpio_request(GPIO_FN_LCDDON, NULL);
+ gpio_request(GPIO_FN_LCDLCLK, NULL);
+ ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+ gpio_request(GPIO_PTE6, NULL);
+ gpio_request(GPIO_PTU1, NULL);
+ gpio_request(GPIO_PTR1, NULL);
+ gpio_request(GPIO_PTA2, NULL);
+ gpio_direction_input(GPIO_PTE6);
+ gpio_direction_output(GPIO_PTU1, 0);
+ gpio_direction_output(GPIO_PTR1, 0);
+ gpio_direction_output(GPIO_PTA2, 0);
+
+ if (gpio_get_value(GPIO_PTE6)) {
+ /* DVI */
+ lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
+ lcdc_info.ch[0].lcd_cfg.name = "DVI";
+ lcdc_info.ch[0].lcd_cfg.xres = 1280;
+ lcdc_info.ch[0].lcd_cfg.yres = 720;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 220;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+
+ gpio_set_value(GPIO_PTA2, 1);
+ gpio_set_value(GPIO_PTU1, 1);
+ } else {
+ /* Panel */
+ /* not supported */
+ }
+
return platform_add_devices(ecovec_devices,
ARRAY_SIZE(ecovec_devices));
}