Merge git://oss.sgi.com:8090/oss/git/xfs-2.6
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index b4a1ea7..4d4897c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -148,3 +148,17 @@
brother on Alchemy SOCs. The loss of features is not considered an
issue.
Who: Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What: Legacy /proc/pci interface (PCI_LEGACY_PROC)
+When: March 2006
+Why: deprecated since 2.5.53 in favor of lspci(8)
+Who: Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
+What: pci_module_init(driver)
+When: January 2007
+Why: Is replaced by pci_register_driver(pci_driver).
+Who: Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
new file mode 100644
index 0000000..f8c16cb
--- /dev/null
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -0,0 +1,24 @@
+1 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.02
+3 Older Version : 00.00.02.01
+
+i. New template defined to represent each family of controllers (identified by processor used).
+ The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
+
+ -Sumant Patro <Sumant.Patro@lsil.com>
+
+1 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.00-rc4
+3 Older Version : 00.00.02.01
+
+i. Code reorganized to remove code duplication in megasas_build_cmd.
+
+ "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command"
+
+ - Christoph Hellwig <hch@lst.de>
+
+ii. Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems.
+
+ "MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work"
+
+ - Christoph Hellwig <hch@lst.de>
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 0aeef74..382b439 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -1,5 +1,5 @@
====================================================================
-= Adaptec Ultra320 Family Manager Set v1.3.11 =
+= Adaptec Ultra320 Family Manager Set =
= =
= README for =
= The Linux Operating System =
@@ -63,6 +63,11 @@
68-pin)
2. Version History
+ 3.0 (December 1st, 2005)
+ - Updated driver to use SCSI transport class infrastructure
+ - Upported sequencer and core fixes from adaptec released
+ version 2.0.15 of the driver.
+
1.3.11 (July 11, 2003)
- Fix several deadlock issues.
- Add 29320ALP and 39320B Id's.
@@ -194,7 +199,7 @@
supported)
- Support for the PCI-X standard up to 133MHz
- Support for the PCI v2.2 standard
- - Domain Validation
+ - Domain Validation
2.2. Operating System Support:
- Redhat Linux 7.2, 7.3, 8.0, Advanced Server 2.1
@@ -411,77 +416,53 @@
http://www.adaptec.com.
-5. Contacting Adaptec
+5. Adaptec Customer Support
A Technical Support Identification (TSID) Number is required for
Adaptec technical support.
- The 12-digit TSID can be found on the white barcode-type label
- included inside the box with your product. The TSID helps us
+ included inside the box with your product. The TSID helps us
provide more efficient service by accurately identifying your
product and support status.
+
Support Options
- Search the Adaptec Support Knowledgebase (ASK) at
http://ask.adaptec.com for articles, troubleshooting tips, and
- frequently asked questions for your product.
+ frequently asked questions about your product.
- For support via Email, submit your question to Adaptec's
- Technical Support Specialists at http://ask.adaptec.com.
+ Technical Support Specialists at http://ask.adaptec.com/.
North America
- - Visit our Web site at http://www.adaptec.com.
- - To speak with a Fibre Channel/RAID/External Storage Technical
- Support Specialist, call 1-321-207-2000,
- Hours: Monday-Friday, 3:00 A.M. to 5:00 P.M., PST.
- (Not open on holidays)
- - For Technical Support in all other technologies including
- SCSI, call 1-408-934-7274,
- Hours: Monday-Friday, 6:00 A.M. to 5:00 P.M., PST.
- (Not open on holidays)
- - For after hours support, call 1-800-416-8066 ($99/call,
- $149/call on holidays)
- - To order Adaptec products including software and cables, call
- 1-800-442-7274 or 1-408-957-7274. You can also visit our
- online store at http://www.adaptecstore.com
+ - Visit our Web site at http://www.adaptec.com/.
+ - For information about Adaptec's support options, call
+ 408-957-2550, 24 hours a day, 7 days a week.
+ - To speak with a Technical Support Specialist,
+ * For hardware products, call 408-934-7274,
+ Monday to Friday, 3:00 am to 5:00 pm, PDT.
+ * For RAID and Fibre Channel products, call 321-207-2000,
+ Monday to Friday, 3:00 am to 5:00 pm, PDT.
+ To expedite your service, have your computer with you.
+ - To order Adaptec products, including accessories and cables,
+ call 408-957-7274. To order cables online go to
+ http://www.adaptec.com/buy-cables/.
Europe
- - Visit our Web site at http://www.adaptec-europe.com.
- - English and French: To speak with a Technical Support
- Specialist, call one of the following numbers:
- - English: +32-2-352-3470
- - French: +32-2-352-3460
- Hours: Monday-Thursday, 10:00 to 12:30, 13:30 to 17:30 CET
- Friday, 10:00 to 12:30, 13:30 to 16:30 CET
- - German: To speak with a Technical Support Specialist,
- call +49-89-456-40660
- Hours: Monday-Thursday, 09:30 to 12:30, 13:30 to 16:30 CET
- Friday, 09:30 to 12:30, 13:30 to 15:00 CET
- - To order Adaptec products, including accessories and cables:
- - UK: +0800-96-65-26 or fax +0800-731-02-95
- - Other European countries: +32-11-300-379
-
- Australia and New Zealand
- - Visit our Web site at http://www.adaptec.com.au.
- - To speak with a Technical Support Specialist, call
- +612-9416-0698
- Hours: Monday-Friday, 10:00 A.M. to 4:30 P.M., EAT
- (Not open on holidays)
+ - Visit our Web site at http://www.adaptec-europe.com/.
+ - To speak with a Technical Support Specialist, call, or email,
+ * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
+ http://ask-de.adaptec.com/.
+ * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
+ http://ask-fr.adaptec.com/.
+ * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
+ http://ask.adaptec.com/.
+ - You can order Adaptec cables online at
+ http://www.adaptec.com/buy-cables/.
Japan
+ - Visit our web site at http://www.adaptec.co.jp/.
- To speak with a Technical Support Specialist, call
- +81-3-5308-6120
- Hours: Monday-Friday, 9:00 a.m. to 12:00 p.m., 1:00 p.m. to
- 6:00 p.m. TSC
-
- Hong Kong and China
- - To speak with a Technical Support Specialist, call
- +852-2869-7200
- Hours: Monday-Friday, 10:00 to 17:00.
- - Fax Technical Support at +852-2869-7100.
-
- Singapore
- - To speak with a Technical Support Specialist, call
- +65-245-7470
- Hours: Monday-Friday, 10:00 to 17:00.
- - Fax Technical Support at +852-2869-7100
+ +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
+ 1:00 p.m. to 6:00 p.m.
-------------------------------------------------------------------
/*
diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt
index 47e74dd..3481fcd 100644
--- a/Documentation/scsi/aic7xxx.txt
+++ b/Documentation/scsi/aic7xxx.txt
@@ -309,81 +309,57 @@
-----------------------------------------------------------------
Example:
- 'options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1"
+ 'options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1'
enables verbose logging, Disable EISA/VLB probing,
and set tag depth on Controller 1/Target 2 to 10 tags.
-3. Contacting Adaptec
+4. Adaptec Customer Support
A Technical Support Identification (TSID) Number is required for
Adaptec technical support.
- The 12-digit TSID can be found on the white barcode-type label
- included inside the box with your product. The TSID helps us
+ included inside the box with your product. The TSID helps us
provide more efficient service by accurately identifying your
product and support status.
+
Support Options
- Search the Adaptec Support Knowledgebase (ASK) at
http://ask.adaptec.com for articles, troubleshooting tips, and
- frequently asked questions for your product.
+ frequently asked questions about your product.
- For support via Email, submit your question to Adaptec's
- Technical Support Specialists at http://ask.adaptec.com.
+ Technical Support Specialists at http://ask.adaptec.com/.
North America
- - Visit our Web site at http://www.adaptec.com.
- - To speak with a Fibre Channel/RAID/External Storage Technical
- Support Specialist, call 1-321-207-2000,
- Hours: Monday-Friday, 3:00 A.M. to 5:00 P.M., PST.
- (Not open on holidays)
- - For Technical Support in all other technologies including
- SCSI, call 1-408-934-7274,
- Hours: Monday-Friday, 6:00 A.M. to 5:00 P.M., PST.
- (Not open on holidays)
- - For after hours support, call 1-800-416-8066 ($99/call,
- $149/call on holidays)
- - To order Adaptec products including software and cables, call
- 1-800-442-7274 or 1-408-957-7274. You can also visit our
- online store at http://www.adaptecstore.com
+ - Visit our Web site at http://www.adaptec.com/.
+ - For information about Adaptec's support options, call
+ 408-957-2550, 24 hours a day, 7 days a week.
+ - To speak with a Technical Support Specialist,
+ * For hardware products, call 408-934-7274,
+ Monday to Friday, 3:00 am to 5:00 pm, PDT.
+ * For RAID and Fibre Channel products, call 321-207-2000,
+ Monday to Friday, 3:00 am to 5:00 pm, PDT.
+ To expedite your service, have your computer with you.
+ - To order Adaptec products, including accessories and cables,
+ call 408-957-7274. To order cables online go to
+ http://www.adaptec.com/buy-cables/.
Europe
- - Visit our Web site at http://www.adaptec-europe.com.
- - English and French: To speak with a Technical Support
- Specialist, call one of the following numbers:
- - English: +32-2-352-3470
- - French: +32-2-352-3460
- Hours: Monday-Thursday, 10:00 to 12:30, 13:30 to 17:30 CET
- Friday, 10:00 to 12:30, 13:30 to 16:30 CET
- - German: To speak with a Technical Support Specialist,
- call +49-89-456-40660
- Hours: Monday-Thursday, 09:30 to 12:30, 13:30 to 16:30 CET
- Friday, 09:30 to 12:30, 13:30 to 15:00 CET
- - To order Adaptec products, including accessories and cables:
- - UK: +0800-96-65-26 or fax +0800-731-02-95
- - Other European countries: +32-11-300-379
-
- Australia and New Zealand
- - Visit our Web site at http://www.adaptec.com.au.
- - To speak with a Technical Support Specialist, call
- +612-9416-0698
- Hours: Monday-Friday, 10:00 A.M. to 4:30 P.M., EAT
- (Not open on holidays)
+ - Visit our Web site at http://www.adaptec-europe.com/.
+ - To speak with a Technical Support Specialist, call, or email,
+ * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
+ http://ask-de.adaptec.com/.
+ * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
+ http://ask-fr.adaptec.com/.
+ * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
+ http://ask.adaptec.com/.
+ - You can order Adaptec cables online at
+ http://www.adaptec.com/buy-cables/.
Japan
+ - Visit our web site at http://www.adaptec.co.jp/.
- To speak with a Technical Support Specialist, call
- +81-3-5308-6120
- Hours: Monday-Friday, 9:00 a.m. to 12:00 p.m., 1:00 p.m. to
- 6:00 p.m. TSC
-
- Hong Kong and China
- - To speak with a Technical Support Specialist, call
- +852-2869-7200
- Hours: Monday-Friday, 10:00 to 17:00.
- - Fax Technical Support at +852-2869-7100.
-
- Singapore
- - To speak with a Technical Support Specialist, call
- +65-245-7470
- Hours: Monday-Friday, 10:00 to 17:00.
- - Fax Technical Support at +852-2869-7100
+ +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
+ 1:00 p.m. to 6:00 p.m.
-------------------------------------------------------------------
/*
diff --git a/Documentation/usb/et61x251.txt b/Documentation/usb/et61x251.txt
new file mode 100644
index 0000000..b44dda4
--- /dev/null
+++ b/Documentation/usb/et61x251.txt
@@ -0,0 +1,306 @@
+
+ ET61X[12]51 PC Camera Controllers
+ Driver for Linux
+ =================================
+
+ - Documentation -
+
+
+Index
+=====
+1. Copyright
+2. Disclaimer
+3. License
+4. Overview and features
+5. Module dependencies
+6. Module loading
+7. Module parameters
+8. Optional device control through "sysfs"
+9. Supported devices
+10. Notes for V4L2 application developers
+11. Contact information
+
+
+1. Copyright
+============
+Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+
+
+2. Disclaimer
+=============
+Etoms is a trademark of Etoms Electronics Corp.
+This software is not developed or sponsored by Etoms Electronics.
+
+
+3. License
+==========
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+4. Overview and features
+========================
+This driver supports the video interface of the devices mounting the ET61X151
+or ET61X251 PC Camera Controllers.
+
+It's worth to note that Etoms Electronics has never collaborated with the
+author during the development of this project; despite several requests,
+Etoms Electronics also refused to release enough detailed specifications of
+the video compression engine.
+
+The driver relies on the Video4Linux2 and USB core modules. It has been
+designed to run properly on SMP systems as well.
+
+The latest version of the ET61X[12]51 driver can be found at the following URL:
+http://www.linux-projects.org/
+
+Some of the features of the driver are:
+
+- full compliance with the Video4Linux2 API (see also "Notes for V4L2
+ application developers" paragraph);
+- available mmap or read/poll methods for video streaming through isochronous
+ data transfers;
+- automatic detection of image sensor;
+- support for any window resolutions and optional panning within the maximum
+ pixel area of image sensor;
+- image downscaling with arbitrary scaling factors from 1 and 2 in both
+ directions (see "Notes for V4L2 application developers" paragraph);
+- two different video formats for uncompressed or compressed data in low or
+ high compression quality (see also "Notes for V4L2 application developers"
+ paragraph);
+- full support for the capabilities of every possible image sensors that can
+ be connected to the ET61X[12]51 bridges, including, for istance, red, green,
+ blue and global gain adjustments and exposure control (see "Supported
+ devices" paragraph for details);
+- use of default color settings for sunlight conditions;
+- dynamic I/O interface for both ET61X[12]51 and image sensor control (see
+ "Optional device control through 'sysfs'" paragraph);
+- dynamic driver control thanks to various module parameters (see "Module
+ parameters" paragraph);
+- up to 64 cameras can be handled at the same time; they can be connected and
+ disconnected from the host many times without turning off the computer, if
+ the system supports hotplugging;
+- no known bugs.
+
+
+5. Module dependencies
+======================
+For it to work properly, the driver needs kernel support for Video4Linux and
+USB.
+
+The following options of the kernel configuration file must be enabled and
+corresponding modules must be compiled:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_DEV=m
+
+To enable advanced debugging functionality on the device through /sysfs:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_ADV_DEBUG=y
+
+ # USB support
+ #
+ CONFIG_USB=m
+
+In addition, depending on the hardware being used, the modules below are
+necessary:
+
+ # USB Host Controller Drivers
+ #
+ CONFIG_USB_EHCI_HCD=m
+ CONFIG_USB_UHCI_HCD=m
+ CONFIG_USB_OHCI_HCD=m
+
+And finally:
+
+ # USB Multimedia devices
+ #
+ CONFIG_USB_ET61X251=m
+
+
+6. Module loading
+=================
+To use the driver, it is necessary to load the "et61x251" module into memory
+after every other module required: "videodev", "usbcore" and, depending on
+the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+
+Loading can be done as shown below:
+
+ [root@localhost home]# modprobe et61x251
+
+At this point the devices should be recognized. You can invoke "dmesg" to
+analyze kernel messages and verify that the loading process has gone well:
+
+ [user@localhost home]$ dmesg
+
+
+7. Module parameters
+====================
+Module parameters are listed below:
+-------------------------------------------------------------------------------
+Name: video_nr
+Type: short array (min = 0, max = 64)
+Syntax: <-1|n[,...]>
+Description: Specify V4L2 minor mode number:
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 64 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ registered camera and use auto for the first one and for every
+ other camera.
+Default: -1
+-------------------------------------------------------------------------------
+Name: force_munmap
+Type: bool array (min = 0, max = 64)
+Syntax: <0|1[,...]>
+Description: Force the application to unmap previously mapped buffer memory
+ before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+ all the applications support this feature. This parameter is
+ specific for each detected camera.
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
+Default: 0
+-------------------------------------------------------------------------------
+Name: debug
+Type: ushort
+Syntax: <n>
+Description: Debugging information level, from 0 to 3:
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = more verbose messages
+ Level 3 is useful for testing only, when only one device
+ is used at the same time. It also shows some more informations
+ about the hardware being detected. This module parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
+
+
+8. Optional device control through "sysfs"
+==========================================
+If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
+it is possible to read and write both the ET61X[12]51 and the image sensor
+registers by using the "sysfs" filesystem interface.
+
+There are four files in the /sys/class/video4linux/videoX directory for each
+registered camera: "reg", "val", "i2c_reg" and "i2c_val". The first two files
+control the ET61X[12]51 bridge, while the other two control the sensor chip.
+"reg" and "i2c_reg" hold the values of the current register index where the
+following reading/writing operations are addressed at through "val" and
+"i2c_val". Their use is not intended for end-users, unless you know what you
+are doing. Remember that you must be logged in as root before writing to them.
+
+As an example, suppose we were to want to read the value contained in the
+register number 1 of the sensor register table - which is usually the product
+identifier - of the camera registered as "/dev/video0":
+
+ [root@localhost #] cd /sys/class/video4linux/video0
+ [root@localhost #] echo 1 > i2c_reg
+ [root@localhost #] cat i2c_val
+
+Note that if the sensor registers can not be read, "cat" will fail.
+To avoid race conditions, all the I/O accesses to the files are serialized.
+
+
+9. Supported devices
+====================
+None of the names of the companies as well as their products will be mentioned
+here. They have never collaborated with the author, so no advertising.
+
+From the point of view of a driver, what unambiguously identify a device are
+its vendor and product USB identifiers. Below is a list of known identifiers of
+devices mounting the ET61X[12]51 PC camera controllers:
+
+Vendor ID Product ID
+--------- ----------
+0x102c 0x6151
+0x102c 0x6251
+0x102c 0x6253
+0x102c 0x6254
+0x102c 0x6255
+0x102c 0x6256
+0x102c 0x6257
+0x102c 0x6258
+0x102c 0x6259
+0x102c 0x625a
+0x102c 0x625b
+0x102c 0x625c
+0x102c 0x625d
+0x102c 0x625e
+0x102c 0x625f
+0x102c 0x6260
+0x102c 0x6261
+0x102c 0x6262
+0x102c 0x6263
+0x102c 0x6264
+0x102c 0x6265
+0x102c 0x6266
+0x102c 0x6267
+0x102c 0x6268
+0x102c 0x6269
+
+The following image sensors are supported:
+
+Model Manufacturer
+----- ------------
+TAS5130D1B Taiwan Advanced Sensor Corporation
+
+All the available control settings of each image sensor are supported through
+the V4L2 interface.
+
+
+10. Notes for V4L2 application developers
+========================================
+This driver follows the V4L2 API specifications. In particular, it enforces two
+rules:
+
+- exactly one I/O method, either "mmap" or "read", is associated with each
+file descriptor. Once it is selected, the application must close and reopen the
+device to switch to the other I/O method;
+
+- although it is not mandatory, previously mapped buffer memory should always
+be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
+The same number of buffers as before will be allocated again to match the size
+of the new video frames, so you have to map the buffers again before any I/O
+attempts on them.
+
+Consistently with the hardware limits, this driver also supports image
+downscaling with arbitrary scaling factors from 1 and 2 in both directions.
+However, the V4L2 API specifications don't correctly define how the scaling
+factor can be chosen arbitrarily by the "negotiation" of the "source" and
+"target" rectangles. To work around this flaw, we have added the convention
+that, during the negotiation, whenever the "VIDIOC_S_CROP" ioctl is issued, the
+scaling factor is restored to 1.
+
+This driver supports two different video formats: the first one is the "8-bit
+Sequential Bayer" format and can be used to obtain uncompressed video data
+from the device through the current I/O method, while the second one provides
+"raw" compressed video data (without frame headers not related to the
+compressed data). The current compression quality may vary from 0 to 1 and can
+be selected or queried thanks to the VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP
+V4L2 ioctl's.
+
+
+11. Contact information
+=======================
+The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
+
+GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
+'FCE635A4'; the public 1024-bit key should be available at any keyserver;
+the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
diff --git a/Documentation/usb/sn9c102.txt b/Documentation/usb/sn9c102.txt
index 3f8a119..c6b7641 100644
--- a/Documentation/usb/sn9c102.txt
+++ b/Documentation/usb/sn9c102.txt
@@ -17,16 +17,15 @@
7. Module parameters
8. Optional device control through "sysfs"
9. Supported devices
-10. How to add plug-in's for new image sensors
-11. Notes for V4L2 application developers
-12. Video frame formats
-13. Contact information
-14. Credits
+10. Notes for V4L2 application developers
+11. Video frame formats
+12. Contact information
+13. Credits
1. Copyright
============
-Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>
+Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>
2. Disclaimer
@@ -54,9 +53,8 @@
4. Overview and features
========================
-This driver attempts to support the video and audio streaming capabilities of
-the devices mounting the SONiX SN9C101, SN9C102 and SN9C103 PC Camera
-Controllers.
+This driver attempts to support the video interface of the devices mounting the
+SONiX SN9C101, SN9C102 and SN9C103 PC Camera Controllers.
It's worth to note that SONiX has never collaborated with the author during the
development of this project, despite several requests for enough detailed
@@ -78,6 +76,7 @@
- available mmap or read/poll methods for video streaming through isochronous
data transfers;
- automatic detection of image sensor;
+- support for built-in microphone interface;
- support for any window resolutions and optional panning within the maximum
pixel area of image sensor;
- image downscaling with arbitrary scaling factors from 1, 2 and 4 in both
@@ -96,7 +95,7 @@
parameters" paragraph);
- up to 64 cameras can be handled at the same time; they can be connected and
disconnected from the host many times without turning off the computer, if
- your system supports hotplugging;
+ the system supports hotplugging;
- no known bugs.
@@ -112,6 +111,12 @@
#
CONFIG_VIDEO_DEV=m
+To enable advanced debugging functionality on the device through /sysfs:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_ADV_DEBUG=y
+
# USB support
#
CONFIG_USB=m
@@ -125,6 +130,21 @@
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
+The SN9C103 controller also provides a built-in microphone interface. It is
+supported by the USB Audio driver thanks to the ALSA API:
+
+ # Sound
+ #
+ CONFIG_SOUND=y
+
+ # Advanced Linux Sound Architecture
+ #
+ CONFIG_SND=m
+
+ # USB devices
+ #
+ CONFIG_SND_USB_AUDIO=m
+
And finally:
# USB Multimedia devices
@@ -153,7 +173,7 @@
Module parameters are listed below:
-------------------------------------------------------------------------------
Name: video_nr
-Type: int array (min = 0, max = 64)
+Type: short array (min = 0, max = 64)
Syntax: <-1|n[,...]>
Description: Specify V4L2 minor mode number:
-1 = use next available
@@ -165,19 +185,19 @@
other camera.
Default: -1
-------------------------------------------------------------------------------
-Name: force_munmap;
+Name: force_munmap
Type: bool array (min = 0, max = 64)
Syntax: <0|1[,...]>
Description: Force the application to unmap previously mapped buffer memory
before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
all the applications support this feature. This parameter is
specific for each detected camera.
- 0 = do not force memory unmapping"
- 1 = force memory unmapping (save memory)"
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
Name: debug
-Type: int
+Type: ushort
Syntax: <n>
Description: Debugging information level, from 0 to 3:
0 = none (use carefully)
@@ -187,14 +207,15 @@
Level 3 is useful for testing only, when only one device
is used. It also shows some more informations about the
hardware being detected. This parameter can be changed at
- runtime thanks to the /sys filesystem.
+ runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
8. Optional device control through "sysfs" [1]
==========================================
-It is possible to read and write both the SN9C10x and the image sensor
+If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
+it is possible to read and write both the SN9C10x and the image sensor
registers by using the "sysfs" filesystem interface.
Every time a supported device is recognized, a write-only file named "green" is
@@ -236,7 +257,7 @@
The sysfs interface also provides the "frame_header" entry, which exports the
frame header of the most recent requested and captured video frame. The header
-is 12-bytes long and is appended to every video frame by the SN9C10x
+is always 18-bytes long and is appended to every video frame by the SN9C10x
controllers. As an example, this additional information can be used by the user
application for implementing auto-exposure features via software.
@@ -250,7 +271,8 @@
0x03 0xC4 Frame synchronisation pattern.
0x04 0xC4 Frame synchronisation pattern.
0x05 0x96 Frame synchronisation pattern.
-0x06 0x00 or 0x01 Unknown meaning. The exact value depends on the chip.
+0x06 0xXX Unknown meaning. The exact value depends on the chip;
+ possible values are 0x00, 0x01 and 0x20.
0x07 0xXX Variable value, whose bits are ff00uzzc, where ff is a
frame counter, u is unknown, zz is a size indicator
(00 = VGA, 01 = SIF, 10 = QSIF) and c stands for
@@ -267,12 +289,23 @@
times the area outside of the specified AE area. For
images that are not pure white, the value scales down
according to relative whiteness.
+ according to relative whiteness.
+
+The following bytes are used by the SN9C103 bridge only:
+
+0x0C 0xXX Unknown meaning
+0x0D 0xXX Unknown meaning
+0x0E 0xXX Unknown meaning
+0x0F 0xXX Unknown meaning
+0x10 0xXX Unknown meaning
+0x11 0xXX Unknown meaning
The AE area (sx, sy, ex, ey) in the active window can be set by programming the
registers 0x1c, 0x1d, 0x1e and 0x1f of the SN9C10x controllers, where one unit
corresponds to 32 pixels.
-[1] The frame header has been documented by Bertrik Sikken.
+[1] Part of the meaning of the frame header has been documented by Bertrik
+ Sikken.
9. Supported devices
@@ -298,6 +331,7 @@
0x0c45 0x602b
0x0c45 0x602c
0x0c45 0x602d
+0x0c45 0x602e
0x0c45 0x6030
0x0c45 0x6080
0x0c45 0x6082
@@ -348,18 +382,7 @@
driver.
-10. How to add plug-in's for new image sensors
-==============================================
-It should be easy to write plug-in's for new sensors by using the small API
-that has been created for this purpose, which is present in "sn9c102_sensor.h"
-(documentation is included there). As an example, have a look at the code in
-"sn9c102_pas106b.c", which uses the mentioned interface.
-
-At the moment, possible unsupported image sensors are: CIS-VF10 (VGA),
-OV7620 (VGA), OV7630 (VGA).
-
-
-11. Notes for V4L2 application developers
+10. Notes for V4L2 application developers
=========================================
This driver follows the V4L2 API specifications. In particular, it enforces two
rules:
@@ -394,7 +417,7 @@
supplied by this driver).
-12. Video frame formats [1]
+11. Video frame formats [1]
=======================
The SN9C10x PC Camera Controllers can send images in two possible video
formats over the USB: either native "Sequential RGB Bayer" or Huffman
@@ -455,7 +478,7 @@
documented by Bertrik Sikken.
-13. Contact information
+12. Contact information
=======================
The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
@@ -464,7 +487,7 @@
the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
-14. Credits
+13. Credits
===========
Many thanks to following persons for their contribute (listed in alphabetical
order):
@@ -480,5 +503,5 @@
- Bertrik Sikken, who reverse-engineered and documented the Huffman compression
algorithm used in the SN9C10x controllers and implemented the first decoder;
- Mizuno Takafumi for the donation of a webcam;
-- An "anonymous" donator (who didn't want his name to be revealed) for the
+- an "anonymous" donator (who didn't want his name to be revealed) for the
donation of a webcam.
diff --git a/Documentation/usb/w9968cf.txt b/Documentation/usb/w9968cf.txt
index 18a4773..9d46cd0 100644
--- a/Documentation/usb/w9968cf.txt
+++ b/Documentation/usb/w9968cf.txt
@@ -57,16 +57,12 @@
The driver is divided into two modules: the basic one, "w9968cf", is needed for
the supported devices to work; the second one, "w9968cf-vpp", is an optional
module, which provides some useful video post-processing functions like video
-decoding, up-scaling and colour conversions. Once the driver is installed,
-every time an application tries to open a recognized device, "w9968cf" checks
-the presence of the "w9968cf-vpp" module and loads it automatically by default.
+decoding, up-scaling and colour conversions.
-Please keep in mind that official kernels do not include the second module for
-performance purposes. However it is always recommended to download and install
-the latest and complete release of the driver, replacing the existing one, if
-present: it will be still even possible not to load the "w9968cf-vpp" module at
-all, if you ever want to. Another important missing feature of the version in
-the official Linux 2.4 kernels is the writeable /proc filesystem interface.
+Note that the official kernels do neither include nor support the second
+module for performance purposes. Therefore, it is always recommended to
+download and install the latest and complete release of the driver,
+replacing the existing one, if present.
The latest and full-featured version of the W996[87]CF driver can be found at:
http://www.linux-projects.org. Please refer to the documentation included in
@@ -201,22 +197,6 @@
enabled for the 'ovcamchip' module to be loaded and for
this parameter to be present.
-------------------------------------------------------------------------------
-Name: vppmod_load
-Type: bool
-Syntax: <0|1>
-Description: Automatic 'w9968cf-vpp' module loading: 0 disabled, 1 enabled.
- If enabled, every time an application attempts to open a
- camera, 'insmod' searches for the video post-processing module
- in the system and loads it automatically (if present).
- The optional 'w9968cf-vpp' module adds extra image manipulation
- capabilities to the 'w9968cf' module,like software up-scaling,
- colour conversions and video decompression for very high frame
- rates.
-Default: 1
-Note: The kernel must be compiled with the CONFIG_KMOD option
- enabled for the 'w9968cf-vpp' module to be loaded and for
- this parameter to be present.
--------------------------------------------------------------------------------
Name: simcams
Type: int
Syntax: <n>
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f8a90a..42955fe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1176,8 +1176,8 @@
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
-P: Greg Edwards
-M: edwardsg@sgi.com
+P: Jes Sorensen
+M: jes@sgi.com
L: linux-altix@sgi.com
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
@@ -2673,6 +2673,14 @@
L: linux-usb-devel@lists.sourceforge.net
S: Maintained
+USB ET61X[12]51 DRIVER
+P: Luca Risolia
+M: luca.risolia@studio.unibo.it
+L: linux-usb-devel@lists.sourceforge.net
+L: video4linux-list@redhat.com
+W: http://www.linux-projects.org
+S: Maintained
+
USB HID/HIDBP DRIVERS
P: Vojtech Pavlik
M: vojtech@suse.cz
@@ -2836,6 +2844,7 @@
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb-devel@lists.sourceforge.net
+L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
@@ -2865,6 +2874,7 @@
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb-devel@lists.sourceforge.net
+L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig
index 6886001..4a8564f 100644
--- a/arch/arm/configs/bast_defconfig
+++ b/arch/arm/configs/bast_defconfig
@@ -14,8 +14,7 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
@@ -360,7 +359,6 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -781,7 +779,6 @@
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 15468a0..c9aa878 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -13,8 +13,7 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -308,9 +307,7 @@
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_OBSOLETE_CHIPS=y
-# CONFIG_MTD_AMDSTD is not set
CONFIG_MTD_SHARP=y
-# CONFIG_MTD_JEDEC is not set
#
# Mapping drivers for chip access
@@ -396,7 +393,6 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -741,7 +737,6 @@
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 33f3108..1964ccd 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -13,8 +13,7 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -473,7 +472,6 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -896,7 +894,6 @@
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 75e6f9a..d058e7c 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -7,337 +7,334 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * This file is included twice in entry-common.S
+ * This file is included thrice in entry-common.S
*/
-#ifndef NR_syscalls
-#define NR_syscalls 328
-#else
-
-100:
-/* 0 */ .long sys_restart_syscall
- .long sys_exit
- .long sys_fork_wrapper
- .long sys_read
- .long sys_write
-/* 5 */ .long sys_open
- .long sys_close
- .long sys_ni_syscall /* was sys_waitpid */
- .long sys_creat
- .long sys_link
-/* 10 */ .long sys_unlink
- .long sys_execve_wrapper
- .long sys_chdir
- .long OBSOLETE(sys_time) /* used by libc4 */
- .long sys_mknod
-/* 15 */ .long sys_chmod
- .long sys_lchown16
- .long sys_ni_syscall /* was sys_break */
- .long sys_ni_syscall /* was sys_stat */
- .long sys_lseek
-/* 20 */ .long sys_getpid
- .long sys_mount
- .long OBSOLETE(sys_oldumount) /* used by libc4 */
- .long sys_setuid16
- .long sys_getuid16
-/* 25 */ .long OBSOLETE(sys_stime)
- .long sys_ptrace
- .long OBSOLETE(sys_alarm) /* used by libc4 */
- .long sys_ni_syscall /* was sys_fstat */
- .long sys_pause
-/* 30 */ .long OBSOLETE(sys_utime) /* used by libc4 */
- .long sys_ni_syscall /* was sys_stty */
- .long sys_ni_syscall /* was sys_getty */
- .long sys_access
- .long sys_nice
-/* 35 */ .long sys_ni_syscall /* was sys_ftime */
- .long sys_sync
- .long sys_kill
- .long sys_rename
- .long sys_mkdir
-/* 40 */ .long sys_rmdir
- .long sys_dup
- .long sys_pipe
- .long sys_times
- .long sys_ni_syscall /* was sys_prof */
-/* 45 */ .long sys_brk
- .long sys_setgid16
- .long sys_getgid16
- .long sys_ni_syscall /* was sys_signal */
- .long sys_geteuid16
-/* 50 */ .long sys_getegid16
- .long sys_acct
- .long sys_umount
- .long sys_ni_syscall /* was sys_lock */
- .long sys_ioctl
-/* 55 */ .long sys_fcntl
- .long sys_ni_syscall /* was sys_mpx */
- .long sys_setpgid
- .long sys_ni_syscall /* was sys_ulimit */
- .long sys_ni_syscall /* was sys_olduname */
-/* 60 */ .long sys_umask
- .long sys_chroot
- .long sys_ustat
- .long sys_dup2
- .long sys_getppid
-/* 65 */ .long sys_getpgrp
- .long sys_setsid
- .long sys_sigaction
- .long sys_ni_syscall /* was sys_sgetmask */
- .long sys_ni_syscall /* was sys_ssetmask */
-/* 70 */ .long sys_setreuid16
- .long sys_setregid16
- .long sys_sigsuspend_wrapper
- .long sys_sigpending
- .long sys_sethostname
-/* 75 */ .long sys_setrlimit
- .long OBSOLETE(sys_old_getrlimit) /* used by libc4 */
- .long sys_getrusage
- .long sys_gettimeofday
- .long sys_settimeofday
-/* 80 */ .long sys_getgroups16
- .long sys_setgroups16
- .long OBSOLETE(old_select) /* used by libc4 */
- .long sys_symlink
- .long sys_ni_syscall /* was sys_lstat */
-/* 85 */ .long sys_readlink
- .long sys_uselib
- .long sys_swapon
- .long sys_reboot
- .long OBSOLETE(old_readdir) /* used by libc4 */
-/* 90 */ .long OBSOLETE(old_mmap) /* used by libc4 */
- .long sys_munmap
- .long sys_truncate
- .long sys_ftruncate
- .long sys_fchmod
-/* 95 */ .long sys_fchown16
- .long sys_getpriority
- .long sys_setpriority
- .long sys_ni_syscall /* was sys_profil */
- .long sys_statfs
-/* 100 */ .long sys_fstatfs
- .long sys_ni_syscall
- .long OBSOLETE(sys_socketcall)
- .long sys_syslog
- .long sys_setitimer
-/* 105 */ .long sys_getitimer
- .long sys_newstat
- .long sys_newlstat
- .long sys_newfstat
- .long sys_ni_syscall /* was sys_uname */
-/* 110 */ .long sys_ni_syscall /* was sys_iopl */
- .long sys_vhangup
- .long sys_ni_syscall
- .long OBSOLETE(sys_syscall) /* call a syscall */
- .long sys_wait4
-/* 115 */ .long sys_swapoff
- .long sys_sysinfo
- .long OBSOLETE(ABI(sys_ipc, sys_oabi_ipc))
- .long sys_fsync
- .long sys_sigreturn_wrapper
-/* 120 */ .long sys_clone_wrapper
- .long sys_setdomainname
- .long sys_newuname
- .long sys_ni_syscall
- .long sys_adjtimex
-/* 125 */ .long sys_mprotect
- .long sys_sigprocmask
- .long sys_ni_syscall /* was sys_create_module */
- .long sys_init_module
- .long sys_delete_module
-/* 130 */ .long sys_ni_syscall /* was sys_get_kernel_syms */
- .long sys_quotactl
- .long sys_getpgid
- .long sys_fchdir
- .long sys_bdflush
-/* 135 */ .long sys_sysfs
- .long sys_personality
- .long sys_ni_syscall /* .long _sys_afs_syscall */
- .long sys_setfsuid16
- .long sys_setfsgid16
-/* 140 */ .long sys_llseek
- .long sys_getdents
- .long sys_select
- .long sys_flock
- .long sys_msync
-/* 145 */ .long sys_readv
- .long sys_writev
- .long sys_getsid
- .long sys_fdatasync
- .long sys_sysctl
-/* 150 */ .long sys_mlock
- .long sys_munlock
- .long sys_mlockall
- .long sys_munlockall
- .long sys_sched_setparam
-/* 155 */ .long sys_sched_getparam
- .long sys_sched_setscheduler
- .long sys_sched_getscheduler
- .long sys_sched_yield
- .long sys_sched_get_priority_max
-/* 160 */ .long sys_sched_get_priority_min
- .long sys_sched_rr_get_interval
- .long sys_nanosleep
- .long sys_arm_mremap
- .long sys_setresuid16
-/* 165 */ .long sys_getresuid16
- .long sys_ni_syscall
- .long sys_ni_syscall /* was sys_query_module */
- .long sys_poll
- .long sys_nfsservctl
-/* 170 */ .long sys_setresgid16
- .long sys_getresgid16
- .long sys_prctl
- .long sys_rt_sigreturn_wrapper
- .long sys_rt_sigaction
-/* 175 */ .long sys_rt_sigprocmask
- .long sys_rt_sigpending
- .long sys_rt_sigtimedwait
- .long sys_rt_sigqueueinfo
- .long sys_rt_sigsuspend_wrapper
-/* 180 */ .long ABI(sys_pread64, sys_oabi_pread64)
- .long ABI(sys_pwrite64, sys_oabi_pwrite64)
- .long sys_chown16
- .long sys_getcwd
- .long sys_capget
-/* 185 */ .long sys_capset
- .long sys_sigaltstack_wrapper
- .long sys_sendfile
- .long sys_ni_syscall
- .long sys_ni_syscall
-/* 190 */ .long sys_vfork_wrapper
- .long sys_getrlimit
- .long sys_mmap2
- .long ABI(sys_truncate64, sys_oabi_truncate64)
- .long ABI(sys_ftruncate64, sys_oabi_ftruncate64)
-/* 195 */ .long ABI(sys_stat64, sys_oabi_stat64)
- .long ABI(sys_lstat64, sys_oabi_lstat64)
- .long ABI(sys_fstat64, sys_oabi_fstat64)
- .long sys_lchown
- .long sys_getuid
-/* 200 */ .long sys_getgid
- .long sys_geteuid
- .long sys_getegid
- .long sys_setreuid
- .long sys_setregid
-/* 205 */ .long sys_getgroups
- .long sys_setgroups
- .long sys_fchown
- .long sys_setresuid
- .long sys_getresuid
-/* 210 */ .long sys_setresgid
- .long sys_getresgid
- .long sys_chown
- .long sys_setuid
- .long sys_setgid
-/* 215 */ .long sys_setfsuid
- .long sys_setfsgid
- .long sys_getdents64
- .long sys_pivot_root
- .long sys_mincore
-/* 220 */ .long sys_madvise
- .long ABI(sys_fcntl64, sys_oabi_fcntl64)
- .long sys_ni_syscall /* TUX */
- .long sys_ni_syscall
- .long sys_gettid
-/* 225 */ .long ABI(sys_readahead, sys_oabi_readahead)
- .long sys_setxattr
- .long sys_lsetxattr
- .long sys_fsetxattr
- .long sys_getxattr
-/* 230 */ .long sys_lgetxattr
- .long sys_fgetxattr
- .long sys_listxattr
- .long sys_llistxattr
- .long sys_flistxattr
-/* 235 */ .long sys_removexattr
- .long sys_lremovexattr
- .long sys_fremovexattr
- .long sys_tkill
- .long sys_sendfile64
-/* 240 */ .long sys_futex
- .long sys_sched_setaffinity
- .long sys_sched_getaffinity
- .long sys_io_setup
- .long sys_io_destroy
-/* 245 */ .long sys_io_getevents
- .long sys_io_submit
- .long sys_io_cancel
- .long sys_exit_group
- .long sys_lookup_dcookie
-/* 250 */ .long sys_epoll_create
- .long ABI(sys_epoll_ctl, sys_oabi_epoll_ctl)
- .long ABI(sys_epoll_wait, sys_oabi_epoll_wait)
- .long sys_remap_file_pages
- .long sys_ni_syscall /* sys_set_thread_area */
-/* 255 */ .long sys_ni_syscall /* sys_get_thread_area */
- .long sys_set_tid_address
- .long sys_timer_create
- .long sys_timer_settime
- .long sys_timer_gettime
-/* 260 */ .long sys_timer_getoverrun
- .long sys_timer_delete
- .long sys_clock_settime
- .long sys_clock_gettime
- .long sys_clock_getres
-/* 265 */ .long sys_clock_nanosleep
- .long sys_statfs64_wrapper
- .long sys_fstatfs64_wrapper
- .long sys_tgkill
- .long sys_utimes
-/* 270 */ .long sys_arm_fadvise64_64
- .long sys_pciconfig_iobase
- .long sys_pciconfig_read
- .long sys_pciconfig_write
- .long sys_mq_open
-/* 275 */ .long sys_mq_unlink
- .long sys_mq_timedsend
- .long sys_mq_timedreceive
- .long sys_mq_notify
- .long sys_mq_getsetattr
-/* 280 */ .long sys_waitid
- .long sys_socket
- .long sys_bind
- .long sys_connect
- .long sys_listen
-/* 285 */ .long sys_accept
- .long sys_getsockname
- .long sys_getpeername
- .long sys_socketpair
- .long sys_send
-/* 290 */ .long sys_sendto
- .long sys_recv
- .long sys_recvfrom
- .long sys_shutdown
- .long sys_setsockopt
-/* 295 */ .long sys_getsockopt
- .long sys_sendmsg
- .long sys_recvmsg
- .long ABI(sys_semop, sys_oabi_semop)
- .long sys_semget
-/* 300 */ .long sys_semctl
- .long sys_msgsnd
- .long sys_msgrcv
- .long sys_msgget
- .long sys_msgctl
-/* 305 */ .long sys_shmat
- .long sys_shmdt
- .long sys_shmget
- .long sys_shmctl
- .long sys_add_key
-/* 310 */ .long sys_request_key
- .long sys_keyctl
- .long ABI(sys_semtimedop, sys_oabi_semtimedop)
-/* vserver */ .long sys_ni_syscall
- .long sys_ioprio_set
-/* 315 */ .long sys_ioprio_get
- .long sys_inotify_init
- .long sys_inotify_add_watch
- .long sys_inotify_rm_watch
- .long sys_mbind
-/* 320 */ .long sys_get_mempolicy
- .long sys_set_mempolicy
-
- .rept NR_syscalls - (. - 100b) / 4
- .long sys_ni_syscall
- .endr
+/* 0 */ CALL(sys_restart_syscall)
+ CALL(sys_exit)
+ CALL(sys_fork_wrapper)
+ CALL(sys_read)
+ CALL(sys_write)
+/* 5 */ CALL(sys_open)
+ CALL(sys_close)
+ CALL(sys_ni_syscall) /* was sys_waitpid */
+ CALL(sys_creat)
+ CALL(sys_link)
+/* 10 */ CALL(sys_unlink)
+ CALL(sys_execve_wrapper)
+ CALL(sys_chdir)
+ CALL(OBSOLETE(sys_time)) /* used by libc4 */
+ CALL(sys_mknod)
+/* 15 */ CALL(sys_chmod)
+ CALL(sys_lchown16)
+ CALL(sys_ni_syscall) /* was sys_break */
+ CALL(sys_ni_syscall) /* was sys_stat */
+ CALL(sys_lseek)
+/* 20 */ CALL(sys_getpid)
+ CALL(sys_mount)
+ CALL(OBSOLETE(sys_oldumount)) /* used by libc4 */
+ CALL(sys_setuid16)
+ CALL(sys_getuid16)
+/* 25 */ CALL(OBSOLETE(sys_stime))
+ CALL(sys_ptrace)
+ CALL(OBSOLETE(sys_alarm)) /* used by libc4 */
+ CALL(sys_ni_syscall) /* was sys_fstat */
+ CALL(sys_pause)
+/* 30 */ CALL(OBSOLETE(sys_utime)) /* used by libc4 */
+ CALL(sys_ni_syscall) /* was sys_stty */
+ CALL(sys_ni_syscall) /* was sys_getty */
+ CALL(sys_access)
+ CALL(sys_nice)
+/* 35 */ CALL(sys_ni_syscall) /* was sys_ftime */
+ CALL(sys_sync)
+ CALL(sys_kill)
+ CALL(sys_rename)
+ CALL(sys_mkdir)
+/* 40 */ CALL(sys_rmdir)
+ CALL(sys_dup)
+ CALL(sys_pipe)
+ CALL(sys_times)
+ CALL(sys_ni_syscall) /* was sys_prof */
+/* 45 */ CALL(sys_brk)
+ CALL(sys_setgid16)
+ CALL(sys_getgid16)
+ CALL(sys_ni_syscall) /* was sys_signal */
+ CALL(sys_geteuid16)
+/* 50 */ CALL(sys_getegid16)
+ CALL(sys_acct)
+ CALL(sys_umount)
+ CALL(sys_ni_syscall) /* was sys_lock */
+ CALL(sys_ioctl)
+/* 55 */ CALL(sys_fcntl)
+ CALL(sys_ni_syscall) /* was sys_mpx */
+ CALL(sys_setpgid)
+ CALL(sys_ni_syscall) /* was sys_ulimit */
+ CALL(sys_ni_syscall) /* was sys_olduname */
+/* 60 */ CALL(sys_umask)
+ CALL(sys_chroot)
+ CALL(sys_ustat)
+ CALL(sys_dup2)
+ CALL(sys_getppid)
+/* 65 */ CALL(sys_getpgrp)
+ CALL(sys_setsid)
+ CALL(sys_sigaction)
+ CALL(sys_ni_syscall) /* was sys_sgetmask */
+ CALL(sys_ni_syscall) /* was sys_ssetmask */
+/* 70 */ CALL(sys_setreuid16)
+ CALL(sys_setregid16)
+ CALL(sys_sigsuspend_wrapper)
+ CALL(sys_sigpending)
+ CALL(sys_sethostname)
+/* 75 */ CALL(sys_setrlimit)
+ CALL(OBSOLETE(sys_old_getrlimit)) /* used by libc4 */
+ CALL(sys_getrusage)
+ CALL(sys_gettimeofday)
+ CALL(sys_settimeofday)
+/* 80 */ CALL(sys_getgroups16)
+ CALL(sys_setgroups16)
+ CALL(OBSOLETE(old_select)) /* used by libc4 */
+ CALL(sys_symlink)
+ CALL(sys_ni_syscall) /* was sys_lstat */
+/* 85 */ CALL(sys_readlink)
+ CALL(sys_uselib)
+ CALL(sys_swapon)
+ CALL(sys_reboot)
+ CALL(OBSOLETE(old_readdir)) /* used by libc4 */
+/* 90 */ CALL(OBSOLETE(old_mmap)) /* used by libc4 */
+ CALL(sys_munmap)
+ CALL(sys_truncate)
+ CALL(sys_ftruncate)
+ CALL(sys_fchmod)
+/* 95 */ CALL(sys_fchown16)
+ CALL(sys_getpriority)
+ CALL(sys_setpriority)
+ CALL(sys_ni_syscall) /* was sys_profil */
+ CALL(sys_statfs)
+/* 100 */ CALL(sys_fstatfs)
+ CALL(sys_ni_syscall)
+ CALL(OBSOLETE(sys_socketcall))
+ CALL(sys_syslog)
+ CALL(sys_setitimer)
+/* 105 */ CALL(sys_getitimer)
+ CALL(sys_newstat)
+ CALL(sys_newlstat)
+ CALL(sys_newfstat)
+ CALL(sys_ni_syscall) /* was sys_uname */
+/* 110 */ CALL(sys_ni_syscall) /* was sys_iopl */
+ CALL(sys_vhangup)
+ CALL(sys_ni_syscall)
+ CALL(OBSOLETE(sys_syscall)) /* call a syscall */
+ CALL(sys_wait4)
+/* 115 */ CALL(sys_swapoff)
+ CALL(sys_sysinfo)
+ CALL(OBSOLETE(ABI(sys_ipc, sys_oabi_ipc)))
+ CALL(sys_fsync)
+ CALL(sys_sigreturn_wrapper)
+/* 120 */ CALL(sys_clone_wrapper)
+ CALL(sys_setdomainname)
+ CALL(sys_newuname)
+ CALL(sys_ni_syscall)
+ CALL(sys_adjtimex)
+/* 125 */ CALL(sys_mprotect)
+ CALL(sys_sigprocmask)
+ CALL(sys_ni_syscall) /* was sys_create_module */
+ CALL(sys_init_module)
+ CALL(sys_delete_module)
+/* 130 */ CALL(sys_ni_syscall) /* was sys_get_kernel_syms */
+ CALL(sys_quotactl)
+ CALL(sys_getpgid)
+ CALL(sys_fchdir)
+ CALL(sys_bdflush)
+/* 135 */ CALL(sys_sysfs)
+ CALL(sys_personality)
+ CALL(sys_ni_syscall) /* CALL(_sys_afs_syscall) */
+ CALL(sys_setfsuid16)
+ CALL(sys_setfsgid16)
+/* 140 */ CALL(sys_llseek)
+ CALL(sys_getdents)
+ CALL(sys_select)
+ CALL(sys_flock)
+ CALL(sys_msync)
+/* 145 */ CALL(sys_readv)
+ CALL(sys_writev)
+ CALL(sys_getsid)
+ CALL(sys_fdatasync)
+ CALL(sys_sysctl)
+/* 150 */ CALL(sys_mlock)
+ CALL(sys_munlock)
+ CALL(sys_mlockall)
+ CALL(sys_munlockall)
+ CALL(sys_sched_setparam)
+/* 155 */ CALL(sys_sched_getparam)
+ CALL(sys_sched_setscheduler)
+ CALL(sys_sched_getscheduler)
+ CALL(sys_sched_yield)
+ CALL(sys_sched_get_priority_max)
+/* 160 */ CALL(sys_sched_get_priority_min)
+ CALL(sys_sched_rr_get_interval)
+ CALL(sys_nanosleep)
+ CALL(sys_arm_mremap)
+ CALL(sys_setresuid16)
+/* 165 */ CALL(sys_getresuid16)
+ CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall) /* was sys_query_module */
+ CALL(sys_poll)
+ CALL(sys_nfsservctl)
+/* 170 */ CALL(sys_setresgid16)
+ CALL(sys_getresgid16)
+ CALL(sys_prctl)
+ CALL(sys_rt_sigreturn_wrapper)
+ CALL(sys_rt_sigaction)
+/* 175 */ CALL(sys_rt_sigprocmask)
+ CALL(sys_rt_sigpending)
+ CALL(sys_rt_sigtimedwait)
+ CALL(sys_rt_sigqueueinfo)
+ CALL(sys_rt_sigsuspend_wrapper)
+/* 180 */ CALL(ABI(sys_pread64, sys_oabi_pread64))
+ CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
+ CALL(sys_chown16)
+ CALL(sys_getcwd)
+ CALL(sys_capget)
+/* 185 */ CALL(sys_capset)
+ CALL(sys_sigaltstack_wrapper)
+ CALL(sys_sendfile)
+ CALL(sys_ni_syscall)
+ CALL(sys_ni_syscall)
+/* 190 */ CALL(sys_vfork_wrapper)
+ CALL(sys_getrlimit)
+ CALL(sys_mmap2)
+ CALL(ABI(sys_truncate64, sys_oabi_truncate64))
+ CALL(ABI(sys_ftruncate64, sys_oabi_ftruncate64))
+/* 195 */ CALL(ABI(sys_stat64, sys_oabi_stat64))
+ CALL(ABI(sys_lstat64, sys_oabi_lstat64))
+ CALL(ABI(sys_fstat64, sys_oabi_fstat64))
+ CALL(sys_lchown)
+ CALL(sys_getuid)
+/* 200 */ CALL(sys_getgid)
+ CALL(sys_geteuid)
+ CALL(sys_getegid)
+ CALL(sys_setreuid)
+ CALL(sys_setregid)
+/* 205 */ CALL(sys_getgroups)
+ CALL(sys_setgroups)
+ CALL(sys_fchown)
+ CALL(sys_setresuid)
+ CALL(sys_getresuid)
+/* 210 */ CALL(sys_setresgid)
+ CALL(sys_getresgid)
+ CALL(sys_chown)
+ CALL(sys_setuid)
+ CALL(sys_setgid)
+/* 215 */ CALL(sys_setfsuid)
+ CALL(sys_setfsgid)
+ CALL(sys_getdents64)
+ CALL(sys_pivot_root)
+ CALL(sys_mincore)
+/* 220 */ CALL(sys_madvise)
+ CALL(ABI(sys_fcntl64, sys_oabi_fcntl64))
+ CALL(sys_ni_syscall) /* TUX */
+ CALL(sys_ni_syscall)
+ CALL(sys_gettid)
+/* 225 */ CALL(ABI(sys_readahead, sys_oabi_readahead))
+ CALL(sys_setxattr)
+ CALL(sys_lsetxattr)
+ CALL(sys_fsetxattr)
+ CALL(sys_getxattr)
+/* 230 */ CALL(sys_lgetxattr)
+ CALL(sys_fgetxattr)
+ CALL(sys_listxattr)
+ CALL(sys_llistxattr)
+ CALL(sys_flistxattr)
+/* 235 */ CALL(sys_removexattr)
+ CALL(sys_lremovexattr)
+ CALL(sys_fremovexattr)
+ CALL(sys_tkill)
+ CALL(sys_sendfile64)
+/* 240 */ CALL(sys_futex)
+ CALL(sys_sched_setaffinity)
+ CALL(sys_sched_getaffinity)
+ CALL(sys_io_setup)
+ CALL(sys_io_destroy)
+/* 245 */ CALL(sys_io_getevents)
+ CALL(sys_io_submit)
+ CALL(sys_io_cancel)
+ CALL(sys_exit_group)
+ CALL(sys_lookup_dcookie)
+/* 250 */ CALL(sys_epoll_create)
+ CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
+ CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
+ CALL(sys_remap_file_pages)
+ CALL(sys_ni_syscall) /* sys_set_thread_area */
+/* 255 */ CALL(sys_ni_syscall) /* sys_get_thread_area */
+ CALL(sys_set_tid_address)
+ CALL(sys_timer_create)
+ CALL(sys_timer_settime)
+ CALL(sys_timer_gettime)
+/* 260 */ CALL(sys_timer_getoverrun)
+ CALL(sys_timer_delete)
+ CALL(sys_clock_settime)
+ CALL(sys_clock_gettime)
+ CALL(sys_clock_getres)
+/* 265 */ CALL(sys_clock_nanosleep)
+ CALL(sys_statfs64_wrapper)
+ CALL(sys_fstatfs64_wrapper)
+ CALL(sys_tgkill)
+ CALL(sys_utimes)
+/* 270 */ CALL(sys_arm_fadvise64_64)
+ CALL(sys_pciconfig_iobase)
+ CALL(sys_pciconfig_read)
+ CALL(sys_pciconfig_write)
+ CALL(sys_mq_open)
+/* 275 */ CALL(sys_mq_unlink)
+ CALL(sys_mq_timedsend)
+ CALL(sys_mq_timedreceive)
+ CALL(sys_mq_notify)
+ CALL(sys_mq_getsetattr)
+/* 280 */ CALL(sys_waitid)
+ CALL(sys_socket)
+ CALL(sys_bind)
+ CALL(sys_connect)
+ CALL(sys_listen)
+/* 285 */ CALL(sys_accept)
+ CALL(sys_getsockname)
+ CALL(sys_getpeername)
+ CALL(sys_socketpair)
+ CALL(sys_send)
+/* 290 */ CALL(sys_sendto)
+ CALL(sys_recv)
+ CALL(sys_recvfrom)
+ CALL(sys_shutdown)
+ CALL(sys_setsockopt)
+/* 295 */ CALL(sys_getsockopt)
+ CALL(sys_sendmsg)
+ CALL(sys_recvmsg)
+ CALL(ABI(sys_semop, sys_oabi_semop))
+ CALL(sys_semget)
+/* 300 */ CALL(sys_semctl)
+ CALL(sys_msgsnd)
+ CALL(sys_msgrcv)
+ CALL(sys_msgget)
+ CALL(sys_msgctl)
+/* 305 */ CALL(sys_shmat)
+ CALL(sys_shmdt)
+ CALL(sys_shmget)
+ CALL(sys_shmctl)
+ CALL(sys_add_key)
+/* 310 */ CALL(sys_request_key)
+ CALL(sys_keyctl)
+ CALL(ABI(sys_semtimedop, sys_oabi_semtimedop))
+/* vserver */ CALL(sys_ni_syscall)
+ CALL(sys_ioprio_set)
+/* 315 */ CALL(sys_ioprio_get)
+ CALL(sys_inotify_init)
+ CALL(sys_inotify_add_watch)
+ CALL(sys_inotify_rm_watch)
+ CALL(sys_mbind)
+/* 320 */ CALL(sys_get_mempolicy)
+ CALL(sys_set_mempolicy)
+#ifndef syscalls_counted
+.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
+#define syscalls_counted
#endif
+.rept syscalls_padding
+ CALL(sys_ni_syscall)
+.endr
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 2b92ce8..dbcb11a 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -87,7 +87,11 @@
b ret_slow_syscall
+ .equ NR_syscalls,0
+#define CALL(x) .equ NR_syscalls,NR_syscalls+1
#include "calls.S"
+#undef CALL
+#define CALL(x) .long x
/*=============================================================================
* SWI handler
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 3182017..a0724f2 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -469,7 +469,9 @@
if (fb->fb.var.bits_per_pixel <= 8)
val = CM_CTRL_LCDMUXSEL_VGA_8421BPP;
else if (fb->fb.var.bits_per_pixel <= 16)
- val = CM_CTRL_LCDMUXSEL_VGA_16BPP;
+ val = CM_CTRL_LCDMUXSEL_VGA_16BPP
+ | CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1
+ | CM_CTRL_STATIC1 | CM_CTRL_STATIC2;
else
val = 0; /* no idea for this, don't trust the docs */
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
index 9cbe5ee..fc10677 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/arch/arm/mach-s3c2410/cpu.h
@@ -17,11 +17,12 @@
* 14-Jan-2005 BJD Added s3c24xx_init_clocks() call
* 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT
* 14-Mar-2005 BJD Updated for __iomem
+ * 15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro
*/
/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
#define MHZ (1000*1000)
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index f58406e..b8d994a 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*
* Modifications:
+ * 15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices
* 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ}
* 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv
* 29-Aug-2004 BJD Added timers 0 through 3
@@ -46,8 +47,8 @@
static struct resource s3c_usb_resource[] = {
[0] = {
- .start = S3C2410_PA_USBHOST,
- .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+ .start = S3C24XX_PA_USBHOST,
+ .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -76,8 +77,8 @@
static struct resource s3c_lcd_resource[] = {
[0] = {
- .start = S3C2410_PA_LCD,
- .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
+ .start = S3C24XX_PA_LCD,
+ .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -139,8 +140,8 @@
static struct resource s3c_usbgadget_resource[] = {
[0] = {
- .start = S3C2410_PA_USBDEV,
- .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
+ .start = S3C24XX_PA_USBDEV,
+ .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -164,8 +165,8 @@
static struct resource s3c_wdt_resource[] = {
[0] = {
- .start = S3C2410_PA_WATCHDOG,
- .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
+ .start = S3C24XX_PA_WATCHDOG,
+ .end = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -189,8 +190,8 @@
static struct resource s3c_i2c_resource[] = {
[0] = {
- .start = S3C2410_PA_IIC,
- .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
+ .start = S3C24XX_PA_IIC,
+ .end = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -214,8 +215,8 @@
static struct resource s3c_iis_resource[] = {
[0] = {
- .start = S3C2410_PA_IIS,
- .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
+ .start = S3C24XX_PA_IIS,
+ .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
.flags = IORESOURCE_MEM,
}
};
@@ -239,8 +240,8 @@
static struct resource s3c_rtc_resource[] = {
[0] = {
- .start = S3C2410_PA_RTC,
- .end = S3C2410_PA_RTC + 0xff,
+ .start = S3C24XX_PA_RTC,
+ .end = S3C24XX_PA_RTC + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -268,8 +269,8 @@
static struct resource s3c_adc_resource[] = {
[0] = {
- .start = S3C2410_PA_ADC,
- .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
+ .start = S3C24XX_PA_ADC,
+ .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -316,8 +317,8 @@
static struct resource s3c_spi0_resource[] = {
[0] = {
- .start = S3C2410_PA_SPI,
- .end = S3C2410_PA_SPI + 0x1f,
+ .start = S3C24XX_PA_SPI,
+ .end = S3C24XX_PA_SPI + 0x1f,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -341,8 +342,8 @@
static struct resource s3c_spi1_resource[] = {
[0] = {
- .start = S3C2410_PA_SPI + 0x20,
- .end = S3C2410_PA_SPI + 0x20 + 0x1f,
+ .start = S3C24XX_PA_SPI + 0x20,
+ .end = S3C24XX_PA_SPI + 0x20 + 0x1f,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -366,8 +367,8 @@
static struct resource s3c_timer0_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x0C,
- .end = S3C2410_PA_TIMER + 0x0C + 0xB,
+ .start = S3C24XX_PA_TIMER + 0x0C,
+ .end = S3C24XX_PA_TIMER + 0x0C + 0xB,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -391,8 +392,8 @@
static struct resource s3c_timer1_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x18,
- .end = S3C2410_PA_TIMER + 0x23,
+ .start = S3C24XX_PA_TIMER + 0x18,
+ .end = S3C24XX_PA_TIMER + 0x23,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -416,8 +417,8 @@
static struct resource s3c_timer2_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x24,
- .end = S3C2410_PA_TIMER + 0x2F,
+ .start = S3C24XX_PA_TIMER + 0x24,
+ .end = S3C24XX_PA_TIMER + 0x2F,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -441,8 +442,8 @@
static struct resource s3c_timer3_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x30,
- .end = S3C2410_PA_TIMER + 0x3B,
+ .start = S3C24XX_PA_TIMER + 0x30,
+ .end = S3C24XX_PA_TIMER + 0x3B,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 65feaf2..4dbd8e7 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1152,7 +1152,7 @@
printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n");
- dma_base = ioremap(S3C2410_PA_DMA, 0x200);
+ dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
if (dma_base == NULL) {
printk(KERN_ERR "dma failed to remap register block\n");
return -ENOMEM;
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 61768dac..e9a055b 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -133,12 +133,12 @@
@@ load UART to allow us to print the two characters for
@@ resume debug
- mov r2, #S3C2410_PA_UART & 0xff000000
- orr r2, r2, #S3C2410_PA_UART & 0xff000
+ mov r2, #S3C24XX_PA_UART & 0xff000000
+ orr r2, r2, #S3C24XX_PA_UART & 0xff000
#if 0
/* SMDK2440 LED set */
- mov r14, #S3C2410_PA_GPIO
+ mov r14, #S3C24XX_PA_GPIO
ldr r12, [ r14, #0x54 ]
bic r12, r12, #3<<4
orr r12, r12, #1<<7
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index de3ce1e..da9b359 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -142,7 +142,7 @@
return NULL;
addr = (unsigned long)area->addr;
if (remap_area_pages(addr, pfn, size, flags)) {
- vfree(addr);
+ vfree((void *)addr);
return NULL;
}
return (void __iomem *) (offset + (char *)addr);
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index d0245a3..ef8d30a 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -343,6 +343,12 @@
PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
PMD_SECT_TEX(1),
.domain = DOMAIN_IO,
+ },
+ [MT_NONSHARED_DEVICE] = {
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_NONSHARED_DEV |
+ PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_IO,
}
};
diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/i386/kernel/cpu/centaur.c
index 394814e..0dd92a2 100644
--- a/arch/i386/kernel/cpu/centaur.c
+++ b/arch/i386/kernel/cpu/centaur.c
@@ -405,10 +405,6 @@
winchip2_protect_mcr();
#endif
break;
- case 10:
- name="4";
- /* no info on the WC4 yet */
- break;
default:
name="??";
}
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index 0f1eb50..26892d2 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -96,6 +96,7 @@
config X86_GX_SUSPMOD
tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+ depends on PCI
help
This add the CPUFreq driver for NatSemi Geode processors which
support suspend modulation.
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
index 270f218..cc73a7a 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -52,6 +52,7 @@
static int has_N44_O17_errata[NR_CPUS];
+static int has_N60_errata[NR_CPUS];
static unsigned int stock_freq;
static struct cpufreq_driver p4clockmod_driver;
static unsigned int cpufreq_p4_get(unsigned int cpu);
@@ -226,6 +227,12 @@
case 0x0f12:
has_N44_O17_errata[policy->cpu] = 1;
dprintk("has errata -- disabling low frequencies\n");
+ break;
+
+ case 0x0f29:
+ has_N60_errata[policy->cpu] = 1;
+ dprintk("has errata -- disabling frequencies lower than 2ghz\n");
+ break;
}
/* get max frequency */
@@ -237,6 +244,8 @@
for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
if ((i<2) && (has_N44_O17_errata[policy->cpu]))
p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ else if (has_N60_errata[policy->cpu] && p4clockmod_table[i].frequency < 2000000)
+ p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
else
p4clockmod_table[i].frequency = (stock_freq * i)/8;
}
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index fbfd374..af591c7 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -43,13 +43,23 @@
{ 0x2c, LVL_1_DATA, 32 }, /* 8-way set assoc, 64 byte line size */
{ 0x30, LVL_1_INST, 32 }, /* 8-way set assoc, 64 byte line size */
{ 0x39, LVL_2, 128 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x3a, LVL_2, 192 }, /* 6-way set assoc, sectored cache, 64 byte line size */
{ 0x3b, LVL_2, 128 }, /* 2-way set assoc, sectored cache, 64 byte line size */
{ 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64 byte line size */
+ { 0x3d, LVL_2, 384 }, /* 6-way set assoc, sectored cache, 64 byte line size */
+ { 0x3e, LVL_2, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */
{ 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */
{ 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */
{ 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */
{ 0x44, LVL_2, 1024 }, /* 4-way set assoc, 32 byte line size */
{ 0x45, LVL_2, 2048 }, /* 4-way set assoc, 32 byte line size */
+ { 0x46, LVL_3, 4096 }, /* 4-way set assoc, 64 byte line size */
+ { 0x47, LVL_3, 8192 }, /* 8-way set assoc, 64 byte line size */
+ { 0x49, LVL_3, 4096 }, /* 16-way set assoc, 64 byte line size */
+ { 0x4a, LVL_3, 6144 }, /* 12-way set assoc, 64 byte line size */
+ { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */
+ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */
+ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */
{ 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */
{ 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */
{ 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */
@@ -57,6 +67,7 @@
{ 0x70, LVL_TRACE, 12 }, /* 8-way set assoc */
{ 0x71, LVL_TRACE, 16 }, /* 8-way set assoc */
{ 0x72, LVL_TRACE, 32 }, /* 8-way set assoc */
+ { 0x73, LVL_TRACE, 64 }, /* 8-way set assoc */
{ 0x78, LVL_2, 1024 }, /* 4-way set assoc, 64 byte line size */
{ 0x79, LVL_2, 128 }, /* 8-way set assoc, sectored cache, 64 byte line size */
{ 0x7a, LVL_2, 256 }, /* 8-way set assoc, sectored cache, 64 byte line size */
diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c
index 1e9db19..3b4618b 100644
--- a/arch/i386/kernel/cpu/mtrr/main.c
+++ b/arch/i386/kernel/cpu/mtrr/main.c
@@ -44,12 +44,10 @@
#include <asm/msr.h>
#include "mtrr.h"
-#define MTRR_VERSION "2.0 (20020519)"
-
u32 num_var_ranges = 0;
unsigned int *usage_table;
-static DECLARE_MUTEX(main_lock);
+static DECLARE_MUTEX(mtrr_sem);
u32 size_or_mask, size_and_mask;
@@ -335,7 +333,7 @@
/* No CPU hotplug when we change MTRR entries */
lock_cpu_hotplug();
/* Search for existing MTRR */
- down(&main_lock);
+ down(&mtrr_sem);
for (i = 0; i < num_var_ranges; ++i) {
mtrr_if->get(i, &lbase, &lsize, <ype);
if (base >= lbase + lsize)
@@ -373,7 +371,7 @@
printk(KERN_INFO "mtrr: no more MTRRs available\n");
error = i;
out:
- up(&main_lock);
+ up(&mtrr_sem);
unlock_cpu_hotplug();
return error;
}
@@ -466,7 +464,7 @@
max = num_var_ranges;
/* No CPU hotplug when we change MTRR entries */
lock_cpu_hotplug();
- down(&main_lock);
+ down(&mtrr_sem);
if (reg < 0) {
/* Search for existing MTRR */
for (i = 0; i < max; ++i) {
@@ -505,7 +503,7 @@
set_mtrr(reg, 0, 0, 0);
error = reg;
out:
- up(&main_lock);
+ up(&mtrr_sem);
unlock_cpu_hotplug();
return error;
}
@@ -671,7 +669,6 @@
break;
}
}
- printk(KERN_INFO "mtrr: v%s\n",MTRR_VERSION);
if (mtrr_if) {
set_num_var_ranges();
@@ -688,7 +685,7 @@
if (!mtrr_if || !use_intel())
return;
/*
- * Ideally we should hold main_lock here to avoid mtrr entries changed,
+ * Ideally we should hold mtrr_sem here to avoid mtrr entries changed,
* but this routine will be called in cpu boot time, holding the lock
* breaks it. This routine is called in two cases: 1.very earily time
* of software resume, when there absolutely isn't mtrr entry changes;
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index e715aa9..3ca59ca 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -539,6 +539,11 @@
case PCI_DEVICE_ID_INTEL_ICH7_30:
case PCI_DEVICE_ID_INTEL_ICH7_31:
case PCI_DEVICE_ID_INTEL_ESB2_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_1:
+ case PCI_DEVICE_ID_INTEL_ICH8_2:
+ case PCI_DEVICE_ID_INTEL_ICH8_3:
+ case PCI_DEVICE_ID_INTEL_ICH8_4:
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index 4bb4d4b..0ee8a98 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -36,8 +36,7 @@
while (1) {
++cfg_num;
if (cfg_num >= pci_mmcfg_config_num) {
- /* Not found - fallback to type 1 */
- return 0;
+ break;
}
cfg = &pci_mmcfg_config[cfg_num];
if (cfg->pci_segment_group_number != seg)
@@ -46,6 +45,18 @@
(cfg->end_bus_number >= bus))
return cfg->base_address;
}
+
+ /* Handle more broken MCFG tables on Asus etc.
+ They only contain a single entry for bus 0-0. Assume
+ this applies to all busses. */
+ cfg = &pci_mmcfg_config[0];
+ if (pci_mmcfg_config_num == 1 &&
+ cfg->pci_segment_group_number == 0 &&
+ (cfg->start_bus_number | cfg->end_bus_number) == 0)
+ return cfg->base_address;
+
+ /* Fall back to type 0 */
+ return 0;
}
static inline void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 403a80a..60a464b 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -512,7 +512,7 @@
st8 [temp1]=r12 // os_status, default is cold boot
mov r6=IA64_MCA_SAME_CONTEXT
;;
- st8 [temp1]=r6 // context, default is same context
+ st8 [temp2]=r6 // context, default is same context
// Save the pt_regs data that is not in minstate. The previous code
// left regs at sos.
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index 43b45b6..f9e0ae9 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -1283,8 +1283,9 @@
if (jiffies - last_time > 5*HZ)
count = 0;
- if (++count < 5) {
+ if (count < 5) {
last_time = jiffies;
+ count++;
return 1;
}
return 0;
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 00700f7..a4c7815 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -10,6 +10,7 @@
#include <linux/nodemask.h>
#include <asm/sn/types.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/sn_feature_sets.h>
#include <asm/sn/geo.h>
#include <asm/sn/io.h>
#include <asm/sn/pcibr_provider.h>
@@ -173,8 +174,8 @@
*/
static u8 war_implemented = 0;
-static void sn_device_fixup_war(u64 nasid, u64 widget, int device,
- struct sn_flush_device_common *common)
+static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device,
+ struct sn_flush_device_common *common)
{
struct sn_flush_device_war *war_list;
struct sn_flush_device_war *dev_entry;
@@ -198,8 +199,9 @@
dev_entry = war_list + device;
memcpy(common,dev_entry, sizeof(*common));
-
kfree(war_list);
+
+ return isrv.status;
}
/*
@@ -279,23 +281,21 @@
memset(dev_entry->common, 0x0, sizeof(struct
sn_flush_device_common));
- status = sal_get_device_dmaflush_list(nasid,
- widget,
- device,
+ if (sn_prom_feature_available(
+ PRF_DEVICE_FLUSH_LIST))
+ status = sal_get_device_dmaflush_list(
+ nasid,
+ widget,
+ device,
(u64)(dev_entry->common));
- if (status) {
- if (sn_sal_rev() < 0x0450) {
- /* shortlived WAR for older
- * PROM images
- */
- sn_device_fixup_war(nasid,
- widget,
- device,
+ else
+ status = sn_device_fixup_war(nasid,
+ widget,
+ device,
dev_entry->common);
- }
- else
- BUG();
- }
+ if (status != SALRET_OK)
+ panic("SAL call failed: %s\n",
+ ia64_sal_strerror(status));
spin_lock_init(&dev_entry->sfdl_flush_lock);
}
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index 8d950c7..36e5437 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -447,7 +447,7 @@
nbytes = nentries * ch->msg_size;
ch->local_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes,
- (GFP_KERNEL | GFP_DMA),
+ GFP_KERNEL,
&ch->local_msgqueue_base);
if (ch->local_msgqueue == NULL) {
continue;
@@ -455,7 +455,7 @@
memset(ch->local_msgqueue, 0, nbytes);
nbytes = nentries * sizeof(struct xpc_notify);
- ch->notify_queue = kmalloc(nbytes, (GFP_KERNEL | GFP_DMA));
+ ch->notify_queue = kmalloc(nbytes, GFP_KERNEL);
if (ch->notify_queue == NULL) {
kfree(ch->local_msgqueue_base);
ch->local_msgqueue = NULL;
@@ -502,7 +502,7 @@
nbytes = nentries * ch->msg_size;
ch->remote_msgqueue = xpc_kmalloc_cacheline_aligned(nbytes,
- (GFP_KERNEL | GFP_DMA),
+ GFP_KERNEL,
&ch->remote_msgqueue_base);
if (ch->remote_msgqueue == NULL) {
continue;
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 9bf9f23..5a36292 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -90,14 +90,14 @@
*/
node = pcibus_to_node(pdev->bus);
if (likely(node >=0)) {
- struct page *p = alloc_pages_node(node, GFP_ATOMIC, get_order(size));
+ struct page *p = alloc_pages_node(node, flags, get_order(size));
if (likely(p))
cpuaddr = page_address(p);
else
return NULL;
} else
- cpuaddr = (void *)__get_free_pages(GFP_ATOMIC, get_order(size));
+ cpuaddr = (void *)__get_free_pages(flags, get_order(size));
if (unlikely(!cpuaddr))
return NULL;
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
index 94ea346..1f01b7e 100644
--- a/arch/ppc/syslib/mv64x60.c
+++ b/arch/ppc/syslib/mv64x60.c
@@ -313,7 +313,7 @@
};
#endif
-#ifdef CONFIG_MV643XX_ETH
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
static struct resource mv64x60_eth_shared_resources[] = {
[0] = {
.name = "ethernet shared base",
@@ -456,7 +456,7 @@
&mpsc0_device,
&mpsc1_device,
#endif
-#ifdef CONFIG_MV643XX_ETH
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
&mv64x60_eth_shared_device,
#endif
#ifdef CONFIG_MV643XX_ETH_0
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index c51d08d..267ec8f 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -38,7 +38,7 @@
#define curptr g6
-#define NR_SYSCALLS 284 /* Each OS is different... */
+#define NR_SYSCALLS 299 /* Each OS is different... */
/* These are just handy. */
#define _SV save %sp, -STACKFRAME_SZ, %sp
diff --git a/arch/sparc/math-emu/math.c b/arch/sparc/math-emu/math.c
index be2c809..8613b3e 100644
--- a/arch/sparc/math-emu/math.c
+++ b/arch/sparc/math-emu/math.c
@@ -323,11 +323,6 @@
case FMOVS:
case FABSS:
case FNEGS: TYPE(2,1,0,1,0,0,0); break;
- default:
-#ifdef DEBUG_MATHEMU
- printk("unknown FPop1: %03lx\n",(insn>>5)&0x1ff);
-#endif
- break;
}
} else if ((insn & 0xc1f80000) == 0x81a80000) /* FPOP2 */ {
switch ((insn >> 5) & 0x1ff) {
@@ -337,11 +332,6 @@
case FCMPED: TYPE(3,0,0,2,1,2,1); break;
case FCMPQ: TYPE(3,0,0,3,1,3,1); break;
case FCMPEQ: TYPE(3,0,0,3,1,3,1); break;
- default:
-#ifdef DEBUG_MATHEMU
- printk("unknown FPop2: %03lx\n",(insn>>5)&0x1ff);
-#endif
- break;
}
}
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index e50e56e..12911e7 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -25,7 +25,7 @@
#define curptr g6
-#define NR_SYSCALLS 284 /* Each OS is different... */
+#define NR_SYSCALLS 299 /* Each OS is different... */
.text
.align 32
diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S
index 9cd272a..60b5937 100644
--- a/arch/sparc64/kernel/sys32.S
+++ b/arch/sparc64/kernel/sys32.S
@@ -84,7 +84,6 @@
SIGN2(sys32_bdflush, sys_bdflush, %o0, %o1)
SIGN1(sys32_mlockall, sys_mlockall, %o0)
SIGN1(sys32_nfsservctl, compat_sys_nfsservctl, %o0)
-SIGN1(sys32_clock_settime, compat_sys_clock_settime, %o1)
SIGN1(sys32_clock_nanosleep, compat_sys_clock_nanosleep, %o1)
SIGN1(sys32_timer_settime, compat_sys_timer_settime, %o1)
SIGN1(sys32_io_submit, compat_sys_io_submit, %o1)
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index bf0fc5b..2881faf 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -71,7 +71,7 @@
/*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler
.word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep
/*250*/ .word sys32_mremap, sys32_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl
- .word sys_ni_syscall, sys32_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep
+ .word sys_ni_syscall, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep
/*260*/ .word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun
.word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy
/*270*/ .word sys32_io_submit, sys_io_cancel, compat_sys_io_getevents, sys32_mq_open, sys_mq_unlink
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index f16c0d5..00d4ddb 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -29,11 +29,8 @@
while (1) {
++cfg_num;
- if (cfg_num >= pci_mmcfg_config_num) {
- /* Not found - fall back to type 1. This happens
- e.g. on the internal devices of a K8 northbridge. */
- return NULL;
- }
+ if (cfg_num >= pci_mmcfg_config_num)
+ break;
cfg = pci_mmcfg_virt[cfg_num].cfg;
if (cfg->pci_segment_group_number != seg)
continue;
@@ -41,6 +38,18 @@
(cfg->end_bus_number >= bus))
return pci_mmcfg_virt[cfg_num].virt;
}
+
+ /* Handle more broken MCFG tables on Asus etc.
+ They only contain a single entry for bus 0-0. Assume
+ this applies to all busses. */
+ cfg = &pci_mmcfg_config[0];
+ if (pci_mmcfg_config_num == 1 &&
+ cfg->pci_segment_group_number == 0 &&
+ (cfg->start_bus_number | cfg->end_bus_number) == 0)
+ return cfg->base_address;
+
+ /* Fall back to type 0 */
+ return 0;
}
static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
diff --git a/block/elevator.c b/block/elevator.c
index c9f424d..96a61e0 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -139,35 +139,16 @@
static char chosen_elevator[16];
-static void elevator_setup_default(void)
+static int __init elevator_setup(char *str)
{
- struct elevator_type *e;
-
- /*
- * If default has not been set, use the compiled-in selection.
- */
- if (!chosen_elevator[0])
- strcpy(chosen_elevator, CONFIG_DEFAULT_IOSCHED);
-
/*
* Be backwards-compatible with previous kernels, so users
* won't get the wrong elevator.
*/
- if (!strcmp(chosen_elevator, "as"))
+ if (!strcmp(str, "as"))
strcpy(chosen_elevator, "anticipatory");
-
- /*
- * If the given scheduler is not available, fall back to the default
- */
- if ((e = elevator_find(chosen_elevator)))
- elevator_put(e);
else
- strcpy(chosen_elevator, CONFIG_DEFAULT_IOSCHED);
-}
-
-static int __init elevator_setup(char *str)
-{
- strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
+ strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
return 0;
}
@@ -184,15 +165,17 @@
q->end_sector = 0;
q->boundary_rq = NULL;
- elevator_setup_default();
-
- if (!name)
- name = chosen_elevator;
-
- e = elevator_get(name);
- if (!e)
+ if (name && !(e = elevator_get(name)))
return -EINVAL;
+ if (!e && *chosen_elevator && !(e = elevator_get(chosen_elevator)))
+ printk("I/O scheduler %s not found\n", chosen_elevator);
+
+ if (!e && !(e = elevator_get(CONFIG_DEFAULT_IOSCHED))) {
+ printk("Default I/O scheduler not found, using no-op\n");
+ e = elevator_get("noop");
+ }
+
eq = kmalloc(sizeof(struct elevator_queue), GFP_KERNEL);
if (!eq) {
elevator_put(e);
@@ -669,8 +652,10 @@
spin_unlock_irq(&elv_list_lock);
printk(KERN_INFO "io scheduler %s registered", e->elevator_name);
- if (!strcmp(e->elevator_name, chosen_elevator))
- printk(" (default)");
+ if (!strcmp(e->elevator_name, chosen_elevator) ||
+ (!*chosen_elevator &&
+ !strcmp(e->elevator_name, CONFIG_DEFAULT_IOSCHED)))
+ printk(" (default)");
printk("\n");
return 0;
}
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 8e27d0a..d38b4afa 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -304,6 +304,7 @@
* blk_queue_ordered - does this queue support ordered writes
* @q: the request queue
* @ordered: one of QUEUE_ORDERED_*
+ * @prepare_flush_fn: rq setup helper for cache flush ordered writes
*
* Description:
* For journalled file systems, doing ordered writes on a commit
@@ -332,6 +333,7 @@
return -EINVAL;
}
+ q->ordered = ordered;
q->next_ordered = ordered;
q->prepare_flush_fn = prepare_flush_fn;
@@ -662,7 +664,7 @@
* Enables a low level driver to set an upper limit on the size of
* received requests.
**/
-void blk_queue_max_sectors(request_queue_t *q, unsigned short max_sectors)
+void blk_queue_max_sectors(request_queue_t *q, unsigned int max_sectors)
{
if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
@@ -2632,6 +2634,7 @@
/**
* blk_end_sync_rq - executes a completion event on a request
* @rq: request to complete
+ * @error: end io status of the request
*/
void blk_end_sync_rq(struct request *rq, int error)
{
@@ -3153,7 +3156,7 @@
if (blk_fs_request(req) && req->rq_disk) {
const int rw = rq_data_dir(req);
- __disk_stat_add(req->rq_disk, sectors[rw], nr_bytes >> 9);
+ disk_stat_add(req->rq_disk, sectors[rw], nr_bytes >> 9);
}
total_bytes = bio_nbytes = 0;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index a05fe58..f04d864 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -14,7 +14,6 @@
* -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
* -- verify the 13 conditions and do bulk resets
* -- kill last_pipe and simply do two-state clearing on both pipes
- * -- verify protocol (bulk) from USB descriptors (maybe...)
* -- highmem
* -- move top_sense and work_bcs into separate allocations (if they survive)
* for cache purists and esoteric architectures.
@@ -355,7 +354,7 @@
* The USB device instance.
*/
struct ub_dev {
- spinlock_t lock;
+ spinlock_t *lock;
atomic_t poison; /* The USB device is disconnected */
int openc; /* protected by ub_lock! */
/* kref is too implicit for our taste */
@@ -420,11 +419,13 @@
static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
int stalled_pipe);
static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static void ub_reset_enter(struct ub_dev *sc);
+static void ub_reset_enter(struct ub_dev *sc, int try);
static void ub_reset_task(void *arg);
static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
struct ub_capacity *ret);
+static int ub_sync_reset(struct ub_dev *sc);
+static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe);
static int ub_probe_lun(struct ub_dev *sc, int lnum);
/*
@@ -452,6 +453,10 @@
#define UB_MAX_HOSTS 26
static char ub_hostv[UB_MAX_HOSTS];
+#define UB_QLOCK_NUM 5
+static spinlock_t ub_qlockv[UB_QLOCK_NUM];
+static int ub_qlock_next = 0;
+
static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
/*
@@ -531,7 +536,7 @@
return 0;
cnt = 0;
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
cnt += sprintf(page + cnt,
"poison %d reset %d\n",
@@ -579,7 +584,7 @@
if (++nc == SCMD_TRACE_SZ) nc = 0;
}
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
return cnt;
}
@@ -627,6 +632,24 @@
}
/*
+ * This is necessitated by the fact that blk_cleanup_queue does not
+ * necesserily destroy the queue. Instead, it may merely decrease q->refcnt.
+ * Since our blk_init_queue() passes a spinlock common with ub_dev,
+ * we have life time issues when ub_cleanup frees ub_dev.
+ */
+static spinlock_t *ub_next_lock(void)
+{
+ unsigned long flags;
+ spinlock_t *ret;
+
+ spin_lock_irqsave(&ub_lock, flags);
+ ret = &ub_qlockv[ub_qlock_next];
+ ub_qlock_next = (ub_qlock_next + 1) % UB_QLOCK_NUM;
+ spin_unlock_irqrestore(&ub_lock, flags);
+ return ret;
+}
+
+/*
* Downcount for deallocation. This rides on two assumptions:
* - once something is poisoned, its refcount cannot grow
* - opens cannot happen at this time (del_gendisk was done)
@@ -961,7 +984,7 @@
if (atomic_read(&sc->poison))
return -ENXIO;
- ub_reset_enter(sc);
+ ub_reset_enter(sc, urq->current_try);
if (urq->current_try >= 3)
return -EIO;
@@ -997,8 +1020,6 @@
* No exceptions.
*
* Host is assumed locked.
- *
- * XXX We only support Bulk for the moment.
*/
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
@@ -1083,9 +1104,10 @@
struct ub_dev *sc = (struct ub_dev *) arg;
unsigned long flags;
- spin_lock_irqsave(&sc->lock, flags);
- usb_unlink_urb(&sc->work_urb);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
+ if (!ub_is_completed(&sc->work_done))
+ usb_unlink_urb(&sc->work_urb);
+ spin_unlock_irqrestore(sc->lock, flags);
}
/*
@@ -1108,10 +1130,9 @@
struct ub_dev *sc = (struct ub_dev *) _dev;
unsigned long flags;
- spin_lock_irqsave(&sc->lock, flags);
- del_timer(&sc->work_timer);
+ spin_lock_irqsave(sc->lock, flags);
ub_scsi_dispatch(sc);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
}
static void ub_scsi_dispatch(struct ub_dev *sc)
@@ -1133,6 +1154,7 @@
} else {
if (!ub_is_completed(&sc->work_done))
break;
+ del_timer(&sc->work_timer);
ub_scsi_urb_compl(sc, cmd);
}
}
@@ -1680,16 +1702,18 @@
/*
* Reset management
+ * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
+ * XXX Make usb_sync_reset asynchronous.
*/
-static void ub_reset_enter(struct ub_dev *sc)
+static void ub_reset_enter(struct ub_dev *sc, int try)
{
if (sc->reset) {
/* This happens often on multi-LUN devices. */
return;
}
- sc->reset = 1;
+ sc->reset = try + 1;
#if 0 /* Not needed because the disconnect waits for us. */
unsigned long flags;
@@ -1727,6 +1751,11 @@
if (atomic_read(&sc->poison)) {
printk(KERN_NOTICE "%s: Not resetting disconnected device\n",
sc->name); /* P3 This floods. Remove soon. XXX */
+ } else if ((sc->reset & 1) == 0) {
+ ub_sync_reset(sc);
+ msleep(700); /* usb-storage sleeps 6s (!) */
+ ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
+ ub_probe_clear_stall(sc, sc->send_bulk_pipe);
} else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
printk(KERN_NOTICE "%s: Not resetting multi-interface device\n",
sc->name); /* P3 This floods. Remove soon. XXX */
@@ -1754,7 +1783,7 @@
* queues of resets or anything. We do need a spinlock though,
* to interact with block layer.
*/
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
sc->reset = 0;
tasklet_schedule(&sc->tasklet);
list_for_each(p, &sc->luns) {
@@ -1762,7 +1791,7 @@
blk_start_queue(lun->disk->queue);
}
wake_up(&sc->reset_wait);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
}
/*
@@ -1990,11 +2019,11 @@
cmd->done = ub_probe_done;
cmd->back = &compl;
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
cmd->tag = sc->tagcnt++;
rc = ub_submit_scsi(sc, cmd);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
if (rc != 0) {
printk("ub: testing ready: submit error (%d)\n", rc); /* P3 */
@@ -2052,11 +2081,11 @@
cmd->done = ub_probe_done;
cmd->back = &compl;
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
cmd->tag = sc->tagcnt++;
rc = ub_submit_scsi(sc, cmd);
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
if (rc != 0) {
printk("ub: reading capacity: submit error (%d)\n", rc); /* P3 */
@@ -2118,6 +2147,52 @@
}
/*
+ * Reset with a Bulk reset.
+ */
+static int ub_sync_reset(struct ub_dev *sc)
+{
+ int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_ctrlrequest *cr;
+ struct completion compl;
+ struct timer_list timer;
+ int rc;
+
+ init_completion(&compl);
+
+ cr = &sc->work_cr;
+ cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ cr->bRequest = US_BULK_RESET_REQUEST;
+ cr->wValue = cpu_to_le16(0);
+ cr->wIndex = cpu_to_le16(ifnum);
+ cr->wLength = cpu_to_le16(0);
+
+ usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
+ (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
+ sc->work_urb.actual_length = 0;
+ sc->work_urb.error_count = 0;
+ sc->work_urb.status = 0;
+
+ if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
+ printk(KERN_WARNING
+ "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc);
+ return rc;
+ }
+
+ init_timer(&timer);
+ timer.function = ub_probe_timeout;
+ timer.data = (unsigned long) &compl;
+ timer.expires = jiffies + UB_CTRL_TIMEOUT;
+ add_timer(&timer);
+
+ wait_for_completion(&compl);
+
+ del_timer_sync(&timer);
+ usb_kill_urb(&sc->work_urb);
+
+ return sc->work_urb.status;
+}
+
+/*
* Get number of LUNs by the way of Bulk GetMaxLUN command.
*/
static int ub_sync_getmaxlun(struct ub_dev *sc)
@@ -2333,7 +2408,7 @@
if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
goto err_core;
memset(sc, 0, sizeof(struct ub_dev));
- spin_lock_init(&sc->lock);
+ sc->lock = ub_next_lock();
INIT_LIST_HEAD(&sc->luns);
usb_init_urb(&sc->work_urb);
tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
@@ -2483,7 +2558,7 @@
disk->driverfs_dev = &sc->intf->dev;
rc = -ENOMEM;
- if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
+ if ((q = blk_init_queue(ub_request_fn, sc->lock)) == NULL)
goto err_blkqinit;
disk->queue = q;
@@ -2554,7 +2629,7 @@
* and the whole queue drains. So, we just use this code to
* print warnings.
*/
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
{
struct ub_scsi_cmd *cmd;
int cnt = 0;
@@ -2571,7 +2646,7 @@
"%d was queued after shutdown\n", sc->name, cnt);
}
}
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
/*
* Unregister the upper layer.
@@ -2590,19 +2665,15 @@
}
/*
- * Taking a lock on a structure which is about to be freed
- * is very nonsensual. Here it is largely a way to do a debug freeze,
- * and a bracket which shows where the nonsensual code segment ends.
- *
* Testing for -EINPROGRESS is always a bug, so we are bending
* the rules a little.
*/
- spin_lock_irqsave(&sc->lock, flags);
+ spin_lock_irqsave(sc->lock, flags);
if (sc->work_urb.status == -EINPROGRESS) { /* janitors: ignore */
printk(KERN_WARNING "%s: "
"URB is active after disconnect\n", sc->name);
}
- spin_unlock_irqrestore(&sc->lock, flags);
+ spin_unlock_irqrestore(sc->lock, flags);
/*
* There is virtually no chance that other CPU runs times so long
@@ -2636,6 +2707,10 @@
static int __init ub_init(void)
{
int rc;
+ int i;
+
+ for (i = 0; i < UB_QLOCK_NUM; i++)
+ spin_lock_init(&ub_qlockv[i]);
if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
goto err_regblkdev;
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 810679d..9964c50 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -600,6 +600,26 @@
agp_put_bridge(bridge);
}
+#ifdef CONFIG_PM
+
+static int agp_amd64_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int agp_amd64_resume(struct pci_dev *pdev)
+{
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ return amd_8151_configure();
+}
+
+#endif /* CONFIG_PM */
+
static struct pci_device_id agp_amd64_pci_table[] = {
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
@@ -718,6 +738,10 @@
.id_table = agp_amd64_pci_table,
.probe = agp_amd64_probe,
.remove = agp_amd64_remove,
+#ifdef CONFIG_PM
+ .suspend = agp_amd64_suspend,
+ .resume = agp_amd64_resume,
+#endif
};
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 53372a8..5b74c36 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -244,6 +244,22 @@
}
+#ifdef CONFIG_PM
+static int agp_ati_resume(struct pci_dev *dev)
+{
+ pci_restore_state(dev);
+
+ return ati_configure();
+}
+
+static int agp_ati_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ pci_save_state(dev);
+
+ return 0;
+}
+#endif
+
/*
*Since we don't need contigious memory we just try
* to get the gatt table once
@@ -525,6 +541,10 @@
.id_table = agp_ati_pci_table,
.probe = agp_ati_probe,
.remove = agp_ati_remove,
+#ifdef CONFIG_PM
+ .resume = agp_ati_resume,
+ .suspend = agp_ati_suspend,
+#endif
};
static int __init agp_ati_init(void)
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index 17f520c..97eeb23 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -592,7 +592,7 @@
struct agp_file_private *priv = file->private_data;
struct agp_kern_info kerninfo;
- down(&(agp_fe.agp_mutex));
+ mutex_lock(&(agp_fe.agp_mutex));
if (agp_fe.backend_acquired != TRUE)
goto out_eperm;
@@ -627,7 +627,7 @@
size, vma->vm_page_prot)) {
goto out_again;
}
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return 0;
}
@@ -643,20 +643,20 @@
size, vma->vm_page_prot)) {
goto out_again;
}
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return 0;
}
out_eperm:
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return -EPERM;
out_inval:
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return -EINVAL;
out_again:
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return -EAGAIN;
}
@@ -664,7 +664,7 @@
{
struct agp_file_private *priv = file->private_data;
- down(&(agp_fe.agp_mutex));
+ mutex_lock(&(agp_fe.agp_mutex));
DBG("priv=%p", priv);
@@ -687,7 +687,7 @@
agp_remove_file_private(priv);
kfree(priv);
file->private_data = NULL;
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return 0;
}
@@ -698,7 +698,7 @@
struct agp_client *client;
int rc = -ENXIO;
- down(&(agp_fe.agp_mutex));
+ mutex_lock(&(agp_fe.agp_mutex));
if (minor != AGPGART_MINOR)
goto err_out;
@@ -723,13 +723,13 @@
file->private_data = (void *) priv;
agp_insert_file_private(priv);
DBG("private=%p, client=%p", priv, client);
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return 0;
err_out_nomem:
rc = -ENOMEM;
err_out:
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return rc;
}
@@ -985,7 +985,7 @@
int ret_val = -ENOTTY;
DBG("priv=%p, cmd=%x", curr_priv, cmd);
- down(&(agp_fe.agp_mutex));
+ mutex_lock(&(agp_fe.agp_mutex));
if ((agp_fe.current_controller == NULL) &&
(cmd != AGPIOC_ACQUIRE)) {
@@ -1055,7 +1055,7 @@
ioctl_out:
DBG("ioctl returns %d\n", ret_val);
- up(&(agp_fe.agp_mutex));
+ mutex_unlock(&(agp_fe.agp_mutex));
return ret_val;
}
@@ -1081,7 +1081,7 @@
int agp_frontend_initialize(void)
{
memset(&agp_fe, 0, sizeof(struct agp_front_data));
- sema_init(&(agp_fe.agp_mutex), 1);
+ mutex_init(&(agp_fe.agp_mutex));
if (misc_register(&agp_miscdev)) {
printk(KERN_ERR PFX "unable to get minor: %d\n", AGPGART_MINOR);
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index e7bed50..631531f 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -422,7 +422,8 @@
/* Check it's really I915G */
if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB ||
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB ||
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB ||
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB)
gtt_entries = MB(48) - KB(size);
else
gtt_entries = 0;
@@ -431,7 +432,8 @@
/* Check it's really I915G */
if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB ||
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB ||
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB ||
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB)
gtt_entries = MB(64) - KB(size);
else
gtt_entries = 0;
@@ -1681,6 +1683,14 @@
}
name = "945G";
break;
+ case PCI_DEVICE_ID_INTEL_82945GM_HB:
+ if (find_i830(PCI_DEVICE_ID_INTEL_82945GM_IG)) {
+ bridge->driver = &intel_915_driver;
+ } else {
+ bridge->driver = &intel_845_driver;
+ }
+ name = "945GM";
+ break;
case PCI_DEVICE_ID_INTEL_7505_0:
bridge->driver = &intel_7505_driver;
name = "E7505";
@@ -1821,6 +1831,7 @@
ID(PCI_DEVICE_ID_INTEL_82915G_HB),
ID(PCI_DEVICE_ID_INTEL_82915GM_HB),
ID(PCI_DEVICE_ID_INTEL_82945G_HB),
+ ID(PCI_DEVICE_ID_INTEL_82945GM_HB),
{ }
};
diff --git a/drivers/char/agp/isoch.c b/drivers/char/agp/isoch.c
index 4008324..7c14a09 100644
--- a/drivers/char/agp/isoch.c
+++ b/drivers/char/agp/isoch.c
@@ -218,10 +218,8 @@
master[cdev].rq *= (1 << (master[cdev].y - 1));
tot_rq += master[cdev].rq;
-
- if (cdev == ndevs-1)
- master[cdev].n += rem;
}
+ master[ndevs-1].n += rem;
/* Figure the number of isochronous and asynchronous RQ slots the
* target is providing. */
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 277a843..7a51147 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/completion.h>
+#include <linux/mutex.h>
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "cpufreq-core", msg)
@@ -55,7 +56,7 @@
static LIST_HEAD(cpufreq_governor_list);
-static DECLARE_MUTEX (cpufreq_governor_sem);
+static DEFINE_MUTEX (cpufreq_governor_mutex);
struct cpufreq_policy * cpufreq_cpu_get(unsigned int cpu)
{
@@ -297,18 +298,18 @@
return -EINVAL;
} else {
struct cpufreq_governor *t;
- down(&cpufreq_governor_sem);
+ mutex_lock(&cpufreq_governor_mutex);
if (!cpufreq_driver || !cpufreq_driver->target)
goto out;
list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
if (!strnicmp(str_governor,t->name,CPUFREQ_NAME_LEN)) {
*governor = t;
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
return 0;
}
}
out:
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
}
return -EINVAL;
}
@@ -600,7 +601,8 @@
policy->cpu = cpu;
policy->cpus = cpumask_of_cpu(cpu);
- init_MUTEX_LOCKED(&policy->lock);
+ mutex_init(&policy->lock);
+ mutex_lock(&policy->lock);
init_completion(&policy->kobj_unregister);
INIT_WORK(&policy->update, handle_update, (void *)(long)cpu);
@@ -610,6 +612,7 @@
ret = cpufreq_driver->init(policy);
if (ret) {
dprintk("initialization failed\n");
+ mutex_unlock(&policy->lock);
goto err_out;
}
@@ -621,9 +624,10 @@
strlcpy(policy->kobj.name, "cpufreq", KOBJ_NAME_LEN);
ret = kobject_register(&policy->kobj);
- if (ret)
+ if (ret) {
+ mutex_unlock(&policy->lock);
goto err_out_driver_exit;
-
+ }
/* set up files for this cpu device */
drv_attr = cpufreq_driver->attr;
while ((drv_attr) && (*drv_attr)) {
@@ -641,7 +645,7 @@
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
policy->governor = NULL; /* to assure that the starting sequence is
* run in cpufreq_set_policy */
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
/* set default policy */
@@ -762,10 +766,10 @@
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
#endif
- down(&data->lock);
+ mutex_lock(&data->lock);
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- up(&data->lock);
+ mutex_unlock(&data->lock);
kobject_unregister(&data->kobj);
@@ -834,9 +838,9 @@
unsigned int ret = 0;
if (policy) {
- down(&policy->lock);
+ mutex_lock(&policy->lock);
ret = policy->cur;
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
}
@@ -862,7 +866,7 @@
if (!cpufreq_driver->get)
goto out;
- down(&policy->lock);
+ mutex_lock(&policy->lock);
ret = cpufreq_driver->get(cpu);
@@ -875,7 +879,7 @@
}
}
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
out:
cpufreq_cpu_put(policy);
@@ -1158,11 +1162,11 @@
if (!policy)
return -EINVAL;
- down(&policy->lock);
+ mutex_lock(&policy->lock);
ret = __cpufreq_driver_target(policy, target_freq, relation);
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
@@ -1199,9 +1203,9 @@
if (!policy)
return -EINVAL;
- down(&policy->lock);
+ mutex_lock(&policy->lock);
ret = __cpufreq_governor(policy, event);
- up(&policy->lock);
+ mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
@@ -1217,17 +1221,17 @@
if (!governor)
return -EINVAL;
- down(&cpufreq_governor_sem);
+ mutex_lock(&cpufreq_governor_mutex);
list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
if (!strnicmp(governor->name,t->name,CPUFREQ_NAME_LEN)) {
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
return -EBUSY;
}
}
list_add(&governor->governor_list, &cpufreq_governor_list);
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
return 0;
}
@@ -1239,9 +1243,9 @@
if (!governor)
return;
- down(&cpufreq_governor_sem);
+ mutex_lock(&cpufreq_governor_mutex);
list_del(&governor->governor_list);
- up(&cpufreq_governor_sem);
+ mutex_unlock(&cpufreq_governor_mutex);
return;
}
EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
@@ -1268,9 +1272,9 @@
if (!cpu_policy)
return -EINVAL;
- down(&cpu_policy->lock);
+ mutex_lock(&cpu_policy->lock);
memcpy(policy, cpu_policy, sizeof(struct cpufreq_policy));
- up(&cpu_policy->lock);
+ mutex_unlock(&cpu_policy->lock);
cpufreq_cpu_put(cpu_policy);
@@ -1382,7 +1386,7 @@
return -EINVAL;
/* lock this CPU */
- down(&data->lock);
+ mutex_lock(&data->lock);
ret = __cpufreq_set_policy(data, policy);
data->user_policy.min = data->min;
@@ -1390,7 +1394,7 @@
data->user_policy.policy = data->policy;
data->user_policy.governor = data->governor;
- up(&data->lock);
+ mutex_unlock(&data->lock);
cpufreq_cpu_put(data);
return ret;
@@ -1414,7 +1418,7 @@
if (!data)
return -ENODEV;
- down(&data->lock);
+ mutex_lock(&data->lock);
dprintk("updating policy for CPU %u\n", cpu);
memcpy(&policy,
@@ -1425,9 +1429,17 @@
policy.policy = data->user_policy.policy;
policy.governor = data->user_policy.governor;
+ /* BIOS might change freq behind our back
+ -> ask driver for current freq and notify governors about a change */
+ if (cpufreq_driver->get) {
+ policy.cur = cpufreq_driver->get(cpu);
+ if (data->cur != policy.cur)
+ cpufreq_out_of_sync(cpu, data->cur, policy.cur);
+ }
+
ret = __cpufreq_set_policy(data, &policy);
- up(&data->lock);
+ mutex_unlock(&data->lock);
cpufreq_cpu_put(data);
return ret;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 39543a2..ac38766 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -28,7 +28,7 @@
#include <linux/jiffies.h>
#include <linux/kernel_stat.h>
#include <linux/percpu.h>
-
+#include <linux/mutex.h>
/*
* dbs is used in this file as a shortform for demandbased switching
* It helps to keep variable names smaller, simpler
@@ -71,7 +71,7 @@
static unsigned int dbs_enable; /* number of CPUs using this policy */
-static DECLARE_MUTEX (dbs_sem);
+static DEFINE_MUTEX (dbs_mutex);
static DECLARE_WORK (dbs_work, do_dbs_timer, NULL);
struct dbs_tuners {
@@ -139,9 +139,9 @@
if (ret != 1 )
return -EINVAL;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
dbs_tuners_ins.sampling_down_factor = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -153,14 +153,14 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.sampling_rate = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -172,16 +172,16 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
input < MIN_FREQUENCY_UP_THRESHOLD ||
input <= dbs_tuners_ins.down_threshold) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.up_threshold = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -193,16 +193,16 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD ||
input < MIN_FREQUENCY_DOWN_THRESHOLD ||
input >= dbs_tuners_ins.up_threshold) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.down_threshold = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -222,9 +222,9 @@
if ( input > 1 )
input = 1;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
dbs_tuners_ins.ignore_nice = input;
@@ -236,7 +236,7 @@
j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up;
}
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -257,9 +257,9 @@
/* no need to test here if freq_step is zero as the user might actually
* want this, they would be crazy though :) */
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
dbs_tuners_ins.freq_step = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -444,12 +444,12 @@
static void do_dbs_timer(void *data)
{
int i;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
for_each_online_cpu(i)
dbs_check_cpu(i);
schedule_delayed_work(&dbs_work,
usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
}
static inline void dbs_timer_init(void)
@@ -487,7 +487,7 @@
if (this_dbs_info->enable) /* Already enabled */
break;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -521,11 +521,11 @@
dbs_timer_init();
}
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_STOP:
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
this_dbs_info->enable = 0;
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
dbs_enable--;
@@ -536,12 +536,12 @@
if (dbs_enable == 0)
dbs_timer_exit();
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_LIMITS:
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (policy->max < this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(
this_dbs_info->cur_policy,
@@ -550,7 +550,7 @@
__cpufreq_driver_target(
this_dbs_info->cur_policy,
policy->min, CPUFREQ_RELATION_L);
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
}
return 0;
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index e69fd8d..9ee9411 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -27,6 +27,7 @@
#include <linux/jiffies.h>
#include <linux/kernel_stat.h>
#include <linux/percpu.h>
+#include <linux/mutex.h>
/*
* dbs is used in this file as a shortform for demandbased switching
@@ -70,7 +71,7 @@
static unsigned int dbs_enable; /* number of CPUs using this policy */
-static DECLARE_MUTEX (dbs_sem);
+static DEFINE_MUTEX (dbs_mutex);
static DECLARE_WORK (dbs_work, do_dbs_timer, NULL);
struct dbs_tuners {
@@ -136,9 +137,9 @@
if (input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
return -EINVAL;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
dbs_tuners_ins.sampling_down_factor = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -150,14 +151,14 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.sampling_rate = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -169,15 +170,15 @@
int ret;
ret = sscanf (buf, "%u", &input);
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
input < MIN_FREQUENCY_UP_THRESHOLD) {
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return -EINVAL;
}
dbs_tuners_ins.up_threshold = input;
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -197,9 +198,9 @@
if ( input > 1 )
input = 1;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
dbs_tuners_ins.ignore_nice = input;
@@ -211,7 +212,7 @@
j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up;
}
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
return count;
}
@@ -356,12 +357,12 @@
static void do_dbs_timer(void *data)
{
int i;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
for_each_online_cpu(i)
dbs_check_cpu(i);
schedule_delayed_work(&dbs_work,
usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
}
static inline void dbs_timer_init(void)
@@ -399,7 +400,7 @@
if (this_dbs_info->enable) /* Already enabled */
break;
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -435,11 +436,11 @@
dbs_timer_init();
}
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_STOP:
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
this_dbs_info->enable = 0;
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
dbs_enable--;
@@ -450,12 +451,12 @@
if (dbs_enable == 0)
dbs_timer_exit();
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_LIMITS:
- down(&dbs_sem);
+ mutex_lock(&dbs_mutex);
if (policy->max < this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(
this_dbs_info->cur_policy,
@@ -464,7 +465,7 @@
__cpufreq_driver_target(
this_dbs_info->cur_policy,
policy->min, CPUFREQ_RELATION_L);
- up(&dbs_sem);
+ mutex_unlock(&dbs_mutex);
break;
}
return 0;
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index d32bf35..92a0be2 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -1,3 +1,4 @@
+
/*
* linux/drivers/cpufreq/cpufreq_userspace.c
*
@@ -21,6 +22,7 @@
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/sysfs.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
@@ -33,9 +35,8 @@
static unsigned int cpu_cur_freq[NR_CPUS]; /* current CPU freq */
static unsigned int cpu_set_freq[NR_CPUS]; /* CPU freq desired by userspace */
static unsigned int cpu_is_managed[NR_CPUS];
-static struct cpufreq_policy current_policy[NR_CPUS];
-static DECLARE_MUTEX (userspace_sem);
+static DEFINE_MUTEX (userspace_mutex);
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
@@ -64,35 +65,34 @@
*
* Sets the CPU frequency to freq.
*/
-static int cpufreq_set(unsigned int freq, unsigned int cpu)
+static int cpufreq_set(unsigned int freq, struct cpufreq_policy *policy)
{
int ret = -EINVAL;
- dprintk("cpufreq_set for cpu %u, freq %u kHz\n", cpu, freq);
+ dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
- down(&userspace_sem);
- if (!cpu_is_managed[cpu])
+ mutex_lock(&userspace_mutex);
+ if (!cpu_is_managed[policy->cpu])
goto err;
- cpu_set_freq[cpu] = freq;
+ cpu_set_freq[policy->cpu] = freq;
- if (freq < cpu_min_freq[cpu])
- freq = cpu_min_freq[cpu];
- if (freq > cpu_max_freq[cpu])
- freq = cpu_max_freq[cpu];
+ if (freq < cpu_min_freq[policy->cpu])
+ freq = cpu_min_freq[policy->cpu];
+ if (freq > cpu_max_freq[policy->cpu])
+ freq = cpu_max_freq[policy->cpu];
/*
* We're safe from concurrent calls to ->target() here
- * as we hold the userspace_sem lock. If we were calling
+ * as we hold the userspace_mutex lock. If we were calling
* cpufreq_driver_target, a deadlock situation might occur:
- * A: cpufreq_set (lock userspace_sem) -> cpufreq_driver_target(lock policy->lock)
- * B: cpufreq_set_policy(lock policy->lock) -> __cpufreq_governor -> cpufreq_governor_userspace (lock userspace_sem)
+ * A: cpufreq_set (lock userspace_mutex) -> cpufreq_driver_target(lock policy->lock)
+ * B: cpufreq_set_policy(lock policy->lock) -> __cpufreq_governor -> cpufreq_governor_userspace (lock userspace_mutex)
*/
- ret = __cpufreq_driver_target(¤t_policy[cpu], freq,
- CPUFREQ_RELATION_L);
+ ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L);
err:
- up(&userspace_sem);
+ mutex_unlock(&userspace_mutex);
return ret;
}
@@ -113,7 +113,7 @@
if (ret != 1)
return -EINVAL;
- cpufreq_set(freq, policy->cpu);
+ cpufreq_set(freq, policy);
return count;
}
@@ -134,44 +134,48 @@
if (!cpu_online(cpu))
return -EINVAL;
BUG_ON(!policy->cur);
- down(&userspace_sem);
+ mutex_lock(&userspace_mutex);
cpu_is_managed[cpu] = 1;
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
cpu_cur_freq[cpu] = policy->cur;
cpu_set_freq[cpu] = policy->cur;
sysfs_create_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
- memcpy (¤t_policy[cpu], policy, sizeof(struct cpufreq_policy));
dprintk("managing cpu %u started (%u - %u kHz, currently %u kHz)\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu]);
- up(&userspace_sem);
+ mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_STOP:
- down(&userspace_sem);
+ mutex_lock(&userspace_mutex);
cpu_is_managed[cpu] = 0;
cpu_min_freq[cpu] = 0;
cpu_max_freq[cpu] = 0;
cpu_set_freq[cpu] = 0;
sysfs_remove_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
dprintk("managing cpu %u stopped\n", cpu);
- up(&userspace_sem);
+ mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_LIMITS:
- down(&userspace_sem);
+ mutex_lock(&userspace_mutex);
+ dprintk("limit event for cpu %u: %u - %u kHz,"
+ "currently %u kHz, last set to %u kHz\n",
+ cpu, policy->min, policy->max,
+ cpu_cur_freq[cpu], cpu_set_freq[cpu]);
+ if (policy->max < cpu_set_freq[cpu]) {
+ __cpufreq_driver_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
+ }
+ else if (policy->min > cpu_set_freq[cpu]) {
+ __cpufreq_driver_target(policy, policy->min,
+ CPUFREQ_RELATION_L);
+ }
+ else {
+ __cpufreq_driver_target(policy, cpu_set_freq[cpu],
+ CPUFREQ_RELATION_L);
+ }
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
- dprintk("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu], cpu_set_freq[cpu]);
- if (policy->max < cpu_set_freq[cpu]) {
- __cpufreq_driver_target(¤t_policy[cpu], policy->max,
- CPUFREQ_RELATION_H);
- } else if (policy->min > cpu_set_freq[cpu]) {
- __cpufreq_driver_target(¤t_policy[cpu], policy->min,
- CPUFREQ_RELATION_L);
- } else {
- __cpufreq_driver_target(¤t_policy[cpu], cpu_set_freq[cpu],
- CPUFREQ_RELATION_L);
- }
- memcpy (¤t_policy[cpu], policy, sizeof(struct cpufreq_policy));
- up(&userspace_sem);
+ cpu_cur_freq[cpu] = policy->cur;
+ mutex_unlock(&userspace_mutex);
break;
}
return 0;
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index acda7d6..501cc05 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -956,6 +956,8 @@
ib_unregister_event_handler(&sa_dev->event_handler);
+ flush_scheduled_work();
+
for (i = 0; i <= sa_dev->end_port - sa_dev->start_port; ++i) {
ib_unregister_mad_agent(sa_dev->port[i].agent);
kref_put(&sa_dev->port[i].sm_ah->ref, free_sm_ah);
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 96ea79b..903f85a 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -902,6 +902,7 @@
unregister_filesystem(&uverbs_event_fs);
class_destroy(uverbs_class);
unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES);
+ flush_scheduled_work();
idr_destroy(&ib_uverbs_pd_idr);
idr_destroy(&ib_uverbs_mr_idr);
idr_destroy(&ib_uverbs_mw_idr);
diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c
index a14eed0..a19e0ed 100644
--- a/drivers/infiniband/hw/mthca/mthca_av.c
+++ b/drivers/infiniband/hw/mthca/mthca_av.c
@@ -184,7 +184,7 @@
ah->av->sl_tclass_flowlabel & cpu_to_be32(0xfffff);
ib_get_cached_gid(&dev->ib_dev,
be32_to_cpu(ah->av->port_pd) >> 24,
- ah->av->gid_index,
+ ah->av->gid_index % dev->limits.gid_table_len,
&header->grh.source_gid);
memcpy(header->grh.destination_gid.raw,
ah->av->dgid, 16);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index fd3f5c8..c3b5f79 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -505,7 +505,7 @@
list_add_tail(&neigh->list, &path->neigh_list);
- if (path->pathrec.dlid) {
+ if (path->ah) {
kref_get(&path->ah->ref);
neigh->ah = path->ah;
@@ -591,7 +591,7 @@
return;
}
- if (path->pathrec.dlid) {
+ if (path->ah) {
ipoib_dbg(priv, "Send unicast ARP to %04x\n",
be16_to_cpu(path->pathrec.dlid));
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 98039da..ccaa0c3 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -97,6 +97,7 @@
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_neigh *neigh, *tmp;
unsigned long flags;
+ int tx_dropped = 0;
ipoib_dbg_mcast(netdev_priv(dev),
"deleting multicast group " IPOIB_GID_FMT "\n",
@@ -123,8 +124,14 @@
if (mcast->ah)
ipoib_put_ah(mcast->ah);
- while (!skb_queue_empty(&mcast->pkt_queue))
+ while (!skb_queue_empty(&mcast->pkt_queue)) {
+ ++tx_dropped;
dev_kfree_skb_any(skb_dequeue(&mcast->pkt_queue));
+ }
+
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ priv->stats.tx_dropped += tx_dropped;
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
kfree(mcast);
}
@@ -276,8 +283,10 @@
}
/* actually send any queued packets */
+ spin_lock_irq(&priv->tx_lock);
while (!skb_queue_empty(&mcast->pkt_queue)) {
struct sk_buff *skb = skb_dequeue(&mcast->pkt_queue);
+ spin_unlock_irq(&priv->tx_lock);
skb->dev = dev;
@@ -288,7 +297,9 @@
if (dev_queue_xmit(skb))
ipoib_warn(priv, "dev_queue_xmit failed to requeue packet\n");
+ spin_lock_irq(&priv->tx_lock);
}
+ spin_unlock_irq(&priv->tx_lock);
return 0;
}
@@ -300,6 +311,7 @@
{
struct ipoib_mcast *mcast = mcast_ptr;
struct net_device *dev = mcast->dev;
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
if (!status)
ipoib_mcast_join_finish(mcast, mcmember);
@@ -310,8 +322,12 @@
IPOIB_GID_ARG(mcast->mcmember.mgid), status);
/* Flush out any queued packets */
- while (!skb_queue_empty(&mcast->pkt_queue))
+ spin_lock_irq(&priv->tx_lock);
+ while (!skb_queue_empty(&mcast->pkt_queue)) {
+ ++priv->stats.tx_dropped;
dev_kfree_skb_any(skb_dequeue(&mcast->pkt_queue));
+ }
+ spin_unlock_irq(&priv->tx_lock);
/* Clear the busy flag so we try again */
clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
@@ -687,6 +703,7 @@
if (!mcast) {
ipoib_warn(priv, "unable to allocate memory for "
"multicast structure\n");
+ ++priv->stats.tx_dropped;
dev_kfree_skb_any(skb);
goto out;
}
@@ -700,8 +717,10 @@
if (!mcast->ah) {
if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE)
skb_queue_tail(&mcast->pkt_queue, skb);
- else
+ else {
+ ++priv->stats.tx_dropped;
dev_kfree_skb_any(skb);
+ }
if (mcast->query)
ipoib_dbg_mcast(priv, "no address vector, "
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index dd8c6a9..b45a45c 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -29,9 +29,6 @@
#ifdef CONFIG_ARCH_OMAP
#include <asm/arch/gpio.h>
#endif
-
-#else
-#define set_irq_type(irq,type) do{}while(0)
#endif
@@ -509,14 +506,14 @@
ts->msg.complete = ads7846_rx;
ts->msg.context = ts;
- if (request_irq(spi->irq, ads7846_irq, SA_SAMPLE_RANDOM,
- spi->dev.bus_id, ts)) {
+ if (request_irq(spi->irq, ads7846_irq,
+ SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
+ spi->dev.bus_id, ts)) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
input_unregister_device(&ts->input);
kfree(ts);
return -EBUSY;
}
- set_irq_type(spi->irq, IRQT_FALLING);
dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 8a2e265..33ace37 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -29,6 +29,8 @@
# For mptctl:
#CFLAGS_mptctl.o += -DMPT_DEBUG_IOCTL
#
+# For mptfc:
+#CFLAGS_mptfc.o += -DMPT_DEBUG_FC
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index d890b2b..9a2c760 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -81,6 +81,10 @@
/*
* cmd line parameters
*/
+static int mpt_msi_enable;
+module_param(mpt_msi_enable, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
+
#ifdef MFCNT
static int mfcounter = 0;
#define PRINT_MF_COUNT 20000
@@ -174,7 +178,7 @@
static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
-static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
/* module entry point */
@@ -313,7 +317,7 @@
if (ioc->bus_type == FC)
mpt_fc_log_info(ioc, log_info);
else if (ioc->bus_type == SPI)
- mpt_sp_log_info(ioc, log_info);
+ mpt_spi_log_info(ioc, log_info);
else if (ioc->bus_type == SAS)
mpt_sas_log_info(ioc, log_info);
}
@@ -1444,6 +1448,9 @@
ioc->pci_irq = -1;
if (pdev->irq) {
+ if (mpt_msi_enable && !pci_enable_msi(pdev))
+ printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", ioc->name);
+
r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
if (r < 0) {
@@ -1483,6 +1490,10 @@
list_del(&ioc->list);
free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(pdev);
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->alt_ioc = NULL;
iounmap(mem);
kfree(ioc);
pci_set_drvdata(pdev, NULL);
@@ -2136,6 +2147,8 @@
if (ioc->pci_irq != -1) {
free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(ioc->pcidev);
ioc->pci_irq = -1;
}
@@ -2157,6 +2170,10 @@
sz_last = ioc->alloc_total;
dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->alt_ioc = NULL;
+
kfree(ioc);
}
@@ -2770,13 +2787,16 @@
/* RAID FW may take a long time to enable
*/
- if ( (ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
- > MPI_FW_HEADER_PID_PROD_TARGET_SCSI ) {
- rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag);
+ if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) ||
+ (ioc->bus_type == SAS)) {
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 300 /*seconds*/, sleepFlag);
} else {
- rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 30 /*seconds*/, sleepFlag);
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz,
+ (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
+ 30 /*seconds*/, sleepFlag);
}
return rc;
}
@@ -4387,6 +4407,138 @@
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+
+static void
+mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
+ MpiEventDataRaid_t * pRaidEventData)
+{
+ int volume;
+ int reason;
+ int disk;
+ int status;
+ int flags;
+ int state;
+
+ volume = pRaidEventData->VolumeID;
+ reason = pRaidEventData->ReasonCode;
+ disk = pRaidEventData->PhysDiskNum;
+ status = le32_to_cpu(pRaidEventData->SettingsStatus);
+ flags = (status >> 0) & 0xff;
+ state = (status >> 8) & 0xff;
+
+ if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
+ return;
+ }
+
+ if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
+ reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
+ (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d\n",
+ ioc->name, disk);
+ } else {
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
+ ioc->name, volume);
+ }
+
+ switch(reason) {
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED:
+ printk(MYIOC_s_INFO_FMT " volume has been created\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED:
+
+ printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
+ ioc->name,
+ state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
+ ? "optimal"
+ : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
+ ? "degraded"
+ : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
+ ? "failed"
+ : "state unknown",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
+ ? ", enabled" : "",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
+ ? ", quiesced" : "",
+ flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
+ ? ", resync in progress" : "" );
+ break;
+
+ case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
+ printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
+ ioc->name, disk);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
+ ioc->name);
+ break;
+
+ case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
+ printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
+ ioc->name,
+ state == MPI_PHYSDISK0_STATUS_ONLINE
+ ? "online"
+ : state == MPI_PHYSDISK0_STATUS_MISSING
+ ? "missing"
+ : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
+ ? "not compatible"
+ : state == MPI_PHYSDISK0_STATUS_FAILED
+ ? "failed"
+ : state == MPI_PHYSDISK0_STATUS_INITIALIZING
+ ? "initializing"
+ : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
+ ? "offline requested"
+ : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
+ ? "failed requested"
+ : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
+ ? "offline"
+ : "state unknown",
+ flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
+ ? ", out of sync" : "",
+ flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
+ ? ", quiesced" : "" );
+ break;
+
+ case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
+ printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
+ ioc->name, disk);
+ break;
+
+ case MPI_EVENT_RAID_RC_SMART_DATA:
+ printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
+ ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
+ break;
+
+ case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
+ printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
+ ioc->name, disk);
+ break;
+ }
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* GetIoUnitPage2 - Retrieve BIOS version and boot order information.
* @ioc: Pointer to MPT_ADAPTER structure
@@ -4598,6 +4750,14 @@
SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
MpiDeviceInfo_t *pdevice = NULL;
+ /*
+ * Save "Set to Avoid SCSI Bus Resets" flag
+ */
+ ioc->spi_data.bus_reset =
+ (le32_to_cpu(pPP2->PortFlags) &
+ MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
+ 0 : 1 ;
+
/* Save the Port Page 2 data
* (reformat into a 32bit quantity)
*/
@@ -5967,6 +6127,10 @@
}
}
break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ mptbase_raid_process_event_data(ioc,
+ (MpiEventDataRaid_t *)pEventReply->Data);
+ break;
default:
break;
}
@@ -6046,7 +6210,7 @@
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
- * mpt_sp_log_info - Log information returned from SCSI Parallel IOC.
+ * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @mr: Pointer to MPT reply frame
* @log_info: U32 LogInfo word from the IOC
@@ -6054,7 +6218,7 @@
* Refer to lsi/sp_log.h.
*/
static void
-mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
+mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
{
u32 info = log_info & 0x00FF0000;
char *desc = "unknown";
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 47053ac..ea2649e 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.03.06"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.06"
+#define MPT_LINUX_VERSION_COMMON "3.03.07"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.07"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -123,7 +123,7 @@
#define MPT_MAX_FRAME_SIZE 128
#define MPT_DEFAULT_FRAME_SIZE 128
-#define MPT_REPLY_FRAME_SIZE 0x40 /* Must be a multiple of 8 */
+#define MPT_REPLY_FRAME_SIZE 0x50 /* Must be a multiple of 8 */
#define MPT_SG_REQ_128_SCALE 1
#define MPT_SG_REQ_96_SCALE 2
@@ -510,9 +510,10 @@
{
struct list_head list;
struct fc_rport *rport;
- VirtDevice *vdev;
+ struct scsi_target *starget;
FCDevicePage0_t pg0;
u8 flags;
+ u8 remap_needed;
};
/*
@@ -631,6 +632,7 @@
struct mutex sas_topology_mutex;
MPT_SAS_MGMT sas_mgmt;
int num_ports;
+ struct work_struct mptscsih_persistTask;
struct list_head fc_rports;
spinlock_t fc_rport_lock; /* list and ri flags */
@@ -803,6 +805,12 @@
#define dreplyprintk(x)
#endif
+#ifdef DMPT_DEBUG_FC
+#define dfcprintk(x) printk x
+#else
+#define dfcprintk(x)
+#endif
+
#ifdef MPT_DEBUG_TM
#define dtmprintk(x) printk x
#define DBG_DUMP_TM_REQUEST_FRAME(mfp) \
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index b102c76..c3a3499 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -93,10 +93,11 @@
static int mptfcTaskCtx = -1;
static int mptfcInternalCtx = -1; /* Used only for internal commands */
-int mptfc_slave_alloc(struct scsi_device *device);
+static int mptfc_target_alloc(struct scsi_target *starget);
+static int mptfc_slave_alloc(struct scsi_device *sdev);
static int mptfc_qcmd(struct scsi_cmnd *SCpnt,
- void (*done)(struct scsi_cmnd *));
-
+ void (*done)(struct scsi_cmnd *));
+static void mptfc_target_destroy(struct scsi_target *starget);
static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout);
static void __devexit mptfc_remove(struct pci_dev *pdev);
@@ -107,10 +108,10 @@
.name = "MPT FC Host",
.info = mptscsih_info,
.queuecommand = mptfc_qcmd,
- .target_alloc = mptscsih_target_alloc,
+ .target_alloc = mptfc_target_alloc,
.slave_alloc = mptfc_slave_alloc,
.slave_configure = mptscsih_slave_configure,
- .target_destroy = mptscsih_target_destroy,
+ .target_destroy = mptfc_target_destroy,
.slave_destroy = mptscsih_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
@@ -348,14 +349,33 @@
}
static void
+mptfc_remap_sdev(struct scsi_device *sdev, void *arg)
+{
+ VirtDevice *vdev;
+ VirtTarget *vtarget;
+ struct scsi_target *starget;
+
+ starget = scsi_target(sdev);
+ if (starget->hostdata == arg) {
+ vtarget = arg;
+ vdev = sdev->hostdata;
+ if (vdev) {
+ vdev->bus_id = vtarget->bus_id;
+ vdev->target_id = vtarget->target_id;
+ }
+ }
+}
+
+static void
mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
struct mptfc_rport_info *ri;
- int match = 0;
- u64 port_name;
+ int new_ri = 1;
+ u64 pn;
unsigned long flags;
+ VirtTarget *vtarget;
if (mptfc_generate_rport_ids(pg0, &rport_ids) < 0)
return;
@@ -363,14 +383,14 @@
/* scan list looking for a match */
spin_lock_irqsave(&ioc->fc_rport_lock, flags);
list_for_each_entry(ri, &ioc->fc_rports, list) {
- port_name = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
- if (port_name == rport_ids.port_name) { /* match */
+ pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
+ if (pn == rport_ids.port_name) { /* match */
list_move_tail(&ri->list, &ioc->fc_rports);
- match = 1;
+ new_ri = 0;
break;
}
}
- if (!match) { /* allocate one */
+ if (new_ri) { /* allocate one */
spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
ri = kzalloc(sizeof(struct mptfc_rport_info), GFP_KERNEL);
if (!ri)
@@ -382,40 +402,43 @@
ri->pg0 = *pg0; /* add/update pg0 data */
ri->flags &= ~MPT_RPORT_INFO_FLAGS_MISSING;
+ /* MPT_RPORT_INFO_FLAGS_REGISTERED - rport not previously deleted */
if (!(ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED)) {
ri->flags |= MPT_RPORT_INFO_FLAGS_REGISTERED;
spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
- rport = fc_remote_port_add(ioc->sh,channel, &rport_ids);
+ rport = fc_remote_port_add(ioc->sh, channel, &rport_ids);
spin_lock_irqsave(&ioc->fc_rport_lock, flags);
if (rport) {
- if (*((struct mptfc_rport_info **)rport->dd_data) != ri) {
- ri->flags &= ~MPT_RPORT_INFO_FLAGS_MAPPED_VDEV;
- ri->vdev = NULL;
- ri->rport = rport;
- *((struct mptfc_rport_info **)rport->dd_data) = ri;
- }
- rport->dev_loss_tmo = mptfc_dev_loss_tmo;
+ ri->rport = rport;
+ if (new_ri) /* may have been reset by user */
+ rport->dev_loss_tmo = mptfc_dev_loss_tmo;
+ *((struct mptfc_rport_info **)rport->dd_data) = ri;
/*
* if already mapped, remap here. If not mapped,
- * slave_alloc will allocate vdev and map
+ * target_alloc will allocate vtarget and map,
+ * slave_alloc will fill in vdev from vtarget.
*/
- if (ri->flags & MPT_RPORT_INFO_FLAGS_MAPPED_VDEV) {
- ri->vdev->target_id = ri->pg0.CurrentTargetID;
- ri->vdev->bus_id = ri->pg0.CurrentBus;
- ri->vdev->vtarget->target_id = ri->vdev->target_id;
- ri->vdev->vtarget->bus_id = ri->vdev->bus_id;
+ if (ri->starget) {
+ vtarget = ri->starget->hostdata;
+ if (vtarget) {
+ vtarget->target_id = pg0->CurrentTargetID;
+ vtarget->bus_id = pg0->CurrentBus;
+ starget_for_each_device(ri->starget,
+ vtarget,mptfc_remap_sdev);
+ }
+ ri->remap_needed = 0;
}
- #ifdef MPT_DEBUG
- printk ("mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
"rport tid %d, tmo %d\n",
- ioc->sh->host_no,
+ ioc->name,
+ oc->sh->host_no,
pg0->PortIdentifier,
pg0->WWNN,
pg0->WWPN,
pg0->CurrentTargetID,
ri->rport->scsi_target_id,
- ri->rport->dev_loss_tmo);
- #endif
+ ri->rport->dev_loss_tmo));
} else {
list_del(&ri->list);
kfree(ri);
@@ -427,6 +450,65 @@
}
/*
+ * OS entry point to allow for host driver to free allocated memory
+ * Called if no device present or device being unloaded
+ */
+static void
+mptfc_target_destroy(struct scsi_target *starget)
+{
+ struct fc_rport *rport;
+ struct mptfc_rport_info *ri;
+
+ rport = starget_to_rport(starget);
+ if (rport) {
+ ri = *((struct mptfc_rport_info **)rport->dd_data);
+ if (ri) /* better be! */
+ ri->starget = NULL;
+ }
+ if (starget->hostdata)
+ kfree(starget->hostdata);
+ starget->hostdata = NULL;
+}
+
+/*
+ * OS entry point to allow host driver to alloc memory
+ * for each scsi target. Called once per device the bus scan.
+ * Return non-zero if allocation fails.
+ */
+static int
+mptfc_target_alloc(struct scsi_target *starget)
+{
+ VirtTarget *vtarget;
+ struct fc_rport *rport;
+ struct mptfc_rport_info *ri;
+ int rc;
+
+ vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
+ if (!vtarget)
+ return -ENOMEM;
+ starget->hostdata = vtarget;
+
+ rc = -ENODEV;
+ rport = starget_to_rport(starget);
+ if (rport) {
+ ri = *((struct mptfc_rport_info **)rport->dd_data);
+ if (ri) { /* better be! */
+ vtarget->target_id = ri->pg0.CurrentTargetID;
+ vtarget->bus_id = ri->pg0.CurrentBus;
+ ri->starget = starget;
+ ri->remap_needed = 0;
+ rc = 0;
+ }
+ }
+ if (rc != 0) {
+ kfree(vtarget);
+ starget->hostdata = NULL;
+ }
+
+ return rc;
+}
+
+/*
* OS entry point to allow host driver to alloc memory
* for each scsi device. Called once per device the bus scan.
* Return non-zero if allocation fails.
@@ -440,7 +522,6 @@
VirtDevice *vdev;
struct scsi_target *starget;
struct fc_rport *rport;
- struct mptfc_rport_info *ri;
unsigned long flags;
@@ -451,55 +532,44 @@
hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
- vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL);
+ vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdev) {
printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
hd->ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
- memset(vdev, 0, sizeof(VirtDevice));
spin_lock_irqsave(&hd->ioc->fc_rport_lock,flags);
- if (!(ri = *((struct mptfc_rport_info **)rport->dd_data))) {
- spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
- kfree(vdev);
- return -ENODEV;
- }
-
sdev->hostdata = vdev;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
+
if (vtarget->num_luns == 0) {
+ vtarget->ioc_id = hd->ioc->id;
vtarget->tflags = MPT_TARGET_FLAGS_Q_YES |
MPT_TARGET_FLAGS_VALID_INQUIRY;
hd->Targets[sdev->id] = vtarget;
}
- vtarget->target_id = vdev->target_id;
- vtarget->bus_id = vdev->bus_id;
-
vdev->vtarget = vtarget;
vdev->ioc_id = hd->ioc->id;
vdev->lun = sdev->lun;
- vdev->target_id = ri->pg0.CurrentTargetID;
- vdev->bus_id = ri->pg0.CurrentBus;
-
- ri->flags |= MPT_RPORT_INFO_FLAGS_MAPPED_VDEV;
- ri->vdev = vdev;
+ vdev->target_id = vtarget->target_id;
+ vdev->bus_id = vtarget->bus_id;
spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
vtarget->num_luns++;
-#ifdef MPT_DEBUG
- printk ("mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
"CurrentTargetID %d, %x %llx %llx\n",
- sdev->host->host_no,
- vtarget->num_luns,
- sdev->id, ri->pg0.CurrentTargetID,
- ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN);
-#endif
+ ioc->name,
+ sdev->host->host_no,
+ vtarget->num_luns,
+ sdev->id, ri->pg0.CurrentTargetID,
+ ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN));
return 0;
}
@@ -507,6 +577,7 @@
static int
mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
+ struct mptfc_rport_info *ri;
struct fc_rport *rport = starget_to_rport(scsi_target(SCpnt->device));
int err;
@@ -516,6 +587,10 @@
done(SCpnt);
return 0;
}
+ ri = *((struct mptfc_rport_info **)rport->dd_data);
+ if (unlikely(ri->remap_needed))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
return mptscsih_qcmd(SCpnt,done);
}
@@ -591,16 +666,20 @@
ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED|
MPT_RPORT_INFO_FLAGS_MISSING);
+ ri->remap_needed = 1;
fc_remote_port_delete(ri->rport);
/*
* remote port not really deleted 'cause
* binding is by WWPN and driver only
- * registers FCP_TARGETs
+ * registers FCP_TARGETs but cannot trust
+ * data structures.
*/
- #ifdef MPT_DEBUG
- printk ("mptfc_rescan.%d: %llx deleted\n",
- ioc->sh->host_no, ri->pg0.WWPN);
- #endif
+ ri->rport = NULL;
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_rescan.%d: %llx deleted\n",
+ ioc->name,
+ ioc->sh->host_no,
+ ri->pg0.WWPN));
}
}
spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
@@ -872,9 +951,8 @@
}
error = pci_register_driver(&mptfc_driver);
- if (error) {
+ if (error)
fc_release_transport(mptfc_transport_template);
- }
return error;
}
@@ -885,7 +963,8 @@
* @pdev: Pointer to pci_dev structure
*
*/
-static void __devexit mptfc_remove(struct pci_dev *pdev)
+static void __devexit
+mptfc_remove(struct pci_dev *pdev)
{
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
struct mptfc_rport_info *p, *n;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 5a06d8d..2512d0e 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -89,6 +89,8 @@
enum mptsas_hotplug_action {
MPTSAS_ADD_DEVICE,
MPTSAS_DEL_DEVICE,
+ MPTSAS_ADD_RAID,
+ MPTSAS_DEL_RAID,
};
struct mptsas_hotplug_event {
@@ -114,6 +116,7 @@
struct mptsas_devinfo {
u16 handle; /* unique id to address this device */
+ u16 handle_parent; /* unique id to address parent device */
u8 phy_id; /* phy number of parent device */
u8 port_id; /* sas physical port this device
is assoc'd with */
@@ -301,9 +304,8 @@
}
mutex_unlock(&hd->ioc->sas_topology_mutex);
- printk("No matching SAS device found!!\n");
kfree(vdev);
- return -ENODEV;
+ return -ENXIO;
out:
vtarget->ioc_id = vdev->ioc_id;
@@ -321,6 +323,7 @@
struct sas_rphy *rphy;
struct mptsas_portinfo *p;
int i;
+ VirtDevice *vdev;
/*
* Handle hotplug removal case.
@@ -344,8 +347,29 @@
out:
mutex_unlock(&hd->ioc->sas_topology_mutex);
/*
- * TODO: Issue target reset to flush firmware outstanding commands.
+ * Issue target reset to flush firmware outstanding commands.
*/
+ vdev = sdev->hostdata;
+ if (vdev->configured_lun){
+ if (mptscsih_TMHandler(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+ vdev->bus_id,
+ vdev->target_id,
+ 0, 0, 5 /* 5 second timeout */)
+ < 0){
+
+ /* The TM request failed!
+ * Fatal error case.
+ */
+ printk(MYIOC_s_WARN_FMT
+ "Error processing TaskMgmt id=%d TARGET_RESET\n",
+ hd->ioc->name,
+ vdev->target_id);
+
+ hd->tmPending = 0;
+ hd->tmState = TM_STATE_NONE;
+ }
+ }
mptscsih_slave_destroy(sdev);
}
@@ -714,6 +738,7 @@
mptsas_print_device_pg0(buffer);
device_info->handle = le16_to_cpu(buffer->DevHandle);
+ device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
device_info->phy_id = buffer->PhyNum;
device_info->port_id = buffer->PhysicalPort;
device_info->id = buffer->TargetID;
@@ -863,6 +888,26 @@
return error;
}
+/*
+ * Returns true if there is a scsi end device
+ */
+static inline int
+mptsas_is_end_device(struct mptsas_devinfo * attached)
+{
+ if ((attached->handle) &&
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_END_DEVICE) &&
+ ((attached->device_info &
+ MPI_SAS_DEVICE_INFO_SSP_TARGET) |
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_STP_TARGET) |
+ (attached->device_info &
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
+ return 1;
+ else
+ return 0;
+}
+
static void
mptsas_parse_device_info(struct sas_identify *identify,
struct mptsas_devinfo *device_info)
@@ -1227,7 +1272,7 @@
}
static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
+mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id)
{
struct mptsas_portinfo *port_info;
struct mptsas_phyinfo *phy_info = NULL;
@@ -1239,12 +1284,12 @@
*/
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(port_info, &ioc->sas_topology, list) {
- for (i = 0; i < port_info->num_phys; i++) {
- if (port_info->phy_info[i].attached.handle == handle) {
- phy_info = &port_info->phy_info[i];
- break;
- }
- }
+ for (i = 0; i < port_info->num_phys; i++)
+ if (mptsas_is_end_device(&port_info->phy_info[i].attached))
+ if (port_info->phy_info[i].attached.id == id) {
+ phy_info = &port_info->phy_info[i];
+ break;
+ }
}
mutex_unlock(&ioc->sas_topology_mutex);
@@ -1258,36 +1303,58 @@
MPT_ADAPTER *ioc = ev->ioc;
struct mptsas_phyinfo *phy_info;
struct sas_rphy *rphy;
+ struct scsi_device *sdev;
char *ds = NULL;
-
- if (ev->device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
- ds = "ssp";
- if (ev->device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
- ds = "stp";
- if (ev->device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
- ds = "sata";
+ struct mptsas_devinfo sas_device;
switch (ev->event_type) {
case MPTSAS_DEL_DEVICE:
- printk(MYIOC_s_INFO_FMT
- "removing %s device, channel %d, id %d, phy %d\n",
- ioc->name, ds, ev->channel, ev->id, ev->phy_id);
- phy_info = mptsas_find_phyinfo_by_handle(ioc, ev->handle);
+ phy_info = mptsas_find_phyinfo_by_target(ioc, ev->id);
if (!phy_info) {
printk("mptsas: remove event for non-existant PHY.\n");
break;
}
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ ds = "ssp";
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
+ ds = "stp";
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "sata";
+
+ printk(MYIOC_s_INFO_FMT
+ "removing %s device, channel %d, id %d, phy %d\n",
+ ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
+
if (phy_info->rphy) {
sas_rphy_delete(phy_info->rphy);
phy_info->rphy = NULL;
}
break;
case MPTSAS_ADD_DEVICE:
- printk(MYIOC_s_INFO_FMT
- "attaching %s device, channel %d, id %d, phy %d\n",
- ioc->name, ds, ev->channel, ev->id, ev->phy_id);
+
+ /*
+ * When there is no sas address,
+ * RAID volumes are being deleted,
+ * and hidden phy disk are being added.
+ * We don't know the SAS data yet,
+ * so lookup sas device page to get
+ * pertaining info
+ */
+ if (!ev->sas_address) {
+ if (mptsas_sas_device_pg0(ioc,
+ &sas_device, ev->id,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT)))
+ break;
+ ev->handle = sas_device.handle;
+ ev->parent_handle = sas_device.handle_parent;
+ ev->channel = sas_device.channel;
+ ev->phy_id = sas_device.phy_id;
+ ev->sas_address = sas_device.sas_address;
+ ev->device_info = sas_device.device_info;
+ }
phy_info = mptsas_find_phyinfo_by_parent(ioc,
ev->parent_handle, ev->phy_id);
@@ -1310,10 +1377,23 @@
phy_info->attached.sas_address = ev->sas_address;
phy_info->attached.device_info = ev->device_info;
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ ds = "ssp";
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
+ ds = "stp";
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "sata";
+
+ printk(MYIOC_s_INFO_FMT
+ "attaching %s device, channel %d, id %d, phy %d\n",
+ ioc->name, ds, ev->channel, ev->id, ev->phy_id);
+
+
rphy = sas_rphy_alloc(phy_info->phy);
if (!rphy)
break; /* non-fatal: an rphy can be added later */
+ rphy->scsi_target_id = phy_info->attached.id;
mptsas_parse_device_info(&rphy->identify, &phy_info->attached);
if (sas_rphy_add(rphy)) {
sas_rphy_free(rphy);
@@ -1322,6 +1402,40 @@
phy_info->rphy = rphy;
break;
+ case MPTSAS_ADD_RAID:
+ sdev = scsi_device_lookup(
+ ioc->sh,
+ ioc->num_ports,
+ ev->id,
+ 0);
+ if (sdev) {
+ scsi_device_put(sdev);
+ break;
+ }
+ printk(MYIOC_s_INFO_FMT
+ "attaching device, channel %d, id %d\n",
+ ioc->name, ioc->num_ports, ev->id);
+ scsi_add_device(ioc->sh,
+ ioc->num_ports,
+ ev->id,
+ 0);
+ mpt_findImVolumes(ioc);
+ break;
+ case MPTSAS_DEL_RAID:
+ sdev = scsi_device_lookup(
+ ioc->sh,
+ ioc->num_ports,
+ ev->id,
+ 0);
+ if (!sdev)
+ break;
+ printk(MYIOC_s_INFO_FMT
+ "removing device, channel %d, id %d\n",
+ ioc->name, ioc->num_ports, ev->id);
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ mpt_findImVolumes(ioc);
+ break;
}
kfree(ev);
@@ -1372,23 +1486,94 @@
schedule_work(&ev->work);
}
+static void
+mptscsih_send_raid_event(MPT_ADAPTER *ioc,
+ EVENT_DATA_RAID *raid_event_data)
+{
+ struct mptsas_hotplug_event *ev;
+ RAID_VOL0_STATUS * volumeStatus;
+
+ if (ioc->bus_type != SAS)
+ return;
+
+ ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ printk(KERN_WARNING "mptsas: lost hotplug event\n");
+ return;
+ }
+
+ memset(ev,0,sizeof(struct mptsas_hotplug_event));
+ INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
+ ev->ioc = ioc;
+ ev->id = raid_event_data->VolumeID;
+
+ switch (raid_event_data->ReasonCode) {
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
+ ev->event_type = MPTSAS_ADD_DEVICE;
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
+ ev->event_type = MPTSAS_DEL_DEVICE;
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED:
+ ev->event_type = MPTSAS_DEL_RAID;
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED:
+ ev->event_type = MPTSAS_ADD_RAID;
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+ volumeStatus = (RAID_VOL0_STATUS *) &
+ raid_event_data->SettingsStatus;
+ ev->event_type = (volumeStatus->State ==
+ MPI_RAIDVOL0_STATUS_STATE_FAILED) ?
+ MPTSAS_DEL_RAID : MPTSAS_ADD_RAID;
+ break;
+ default:
+ break;
+ }
+ schedule_work(&ev->work);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* work queue thread to clear the persitency table */
+static void
+mptscsih_sas_persist_clear_table(void * arg)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+
+ mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
+}
+
static int
mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
{
+ int rc=1;
u8 event = le32_to_cpu(reply->Event) & 0xFF;
if (!ioc->sh)
- return 1;
+ goto out;
switch (event) {
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
mptscsih_send_sas_event(ioc,
(EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
- return 1; /* currently means nothing really */
-
+ break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ mptscsih_send_raid_event(ioc,
+ (EVENT_DATA_RAID *)reply->Data);
+ break;
+ case MPI_EVENT_PERSISTENT_TABLE_FULL:
+ INIT_WORK(&ioc->mptscsih_persistTask,
+ mptscsih_sas_persist_clear_table,
+ (void *)ioc);
+ schedule_work(&ioc->mptscsih_persistTask);
+ break;
default:
- return mptscsih_event_process(ioc, reply);
+ rc = mptscsih_event_process(ioc, reply);
+ break;
}
+ out:
+
+ return rc;
}
static int
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index cdac557..05789e5 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -144,7 +144,6 @@
static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
static u32 SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc);
-static int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
@@ -159,11 +158,9 @@
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
-static void mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtTarget *vtarget);
+static void mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
-static struct work_struct mptscsih_persistTask;
-
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
static void mptscsih_domainValidation(void *hd);
@@ -563,11 +560,24 @@
MPT_SCSI_HOST *hd;
SCSIIORequest_t *pScsiReq;
SCSIIOReply_t *pScsiReply;
- u16 req_idx;
+ u16 req_idx, req_idx_MR;
hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
+ req_idx_MR = (mr != NULL) ?
+ le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
+ if ((req_idx != req_idx_MR) ||
+ (mf->u.frame.linkage.arg1 == 0xdeadbeaf)) {
+ printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n",
+ ioc->name);
+ printk (MYIOC_s_ERR_FMT
+ "req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n",
+ ioc->name, req_idx, req_idx_MR, mf, mr,
+ hd->ScsiLookup[req_idx_MR]);
+ return 0;
+ }
+
sc = hd->ScsiLookup[req_idx];
if (sc == NULL) {
MPIHeader_t *hdr = (MPIHeader_t *)mf;
@@ -730,6 +740,8 @@
break;
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ sc->resid=0;
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
if (scsi_status == MPI_SCSI_STATUS_BUSY)
@@ -789,7 +801,6 @@
case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
- case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
default:
@@ -1530,7 +1541,7 @@
*
* Returns 0 for SUCCESS or -1 if FAILED.
*/
-static int
+int
mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout)
{
MPT_ADAPTER *ioc;
@@ -1721,6 +1732,20 @@
return retval;
}
+static int
+mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
+{
+ switch (ioc->bus_type) {
+ case FC:
+ return 40;
+ case SAS:
+ return 10;
+ case SPI:
+ default:
+ return 2;
+ }
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
@@ -1792,7 +1817,7 @@
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
vdev->bus_id, vdev->target_id, vdev->lun,
- ctx2abort, 2 /* 2 second timeout */);
+ ctx2abort, mptscsih_get_tm_timeout(ioc));
printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
hd->ioc->name,
@@ -1843,7 +1868,7 @@
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
vdev->bus_id, vdev->target_id,
- 0, 0, 5 /* 5 second timeout */);
+ 0, 0, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
hd->ioc->name,
@@ -1893,7 +1918,7 @@
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
- vdev->bus_id, 0, 0, 0, 5 /* 5 second timeout */);
+ vdev->bus_id, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
hd->ioc->name,
@@ -2016,6 +2041,42 @@
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+static void
+mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
+{
+ char *desc;
+
+ switch (response_code) {
+ case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
+ desc = "The task completed.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
+ desc = "The IOC received an invalid frame status.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
+ desc = "The task type is not supported.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_FAILED:
+ desc = "The requested task failed.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
+ desc = "The task completed successfully.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
+ desc = "The LUN request is invalid.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
+ desc = "The task is in the IOC queue and has not been sent to target.";
+ break;
+ default:
+ desc = "unknown";
+ break;
+ }
+ printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
+ ioc->name, response_code, desc);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
* @ioc: Pointer to MPT_ADAPTER structure
@@ -2064,6 +2125,11 @@
/* Figure out if this was ABORT_TASK, TARGET_RESET, or BUS_RESET! */
tmType = pScsiTmReq->TaskType;
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
+ pScsiTmReply->ResponseCode)
+ mptscsih_taskmgmt_response_code(ioc,
+ pScsiTmReply->ResponseCode);
+
dtmprintk((MYIOC_s_WARN_FMT " TaskType = %d, TerminationCount=%d\n",
ioc->name, tmType, le32_to_cpu(pScsiTmReply->TerminationCount)));
DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply);
@@ -2255,7 +2321,7 @@
vtarget->luns[0] &= ~(1 << vdevice->lun);
vtarget->num_luns--;
if (vtarget->num_luns == 0) {
- mptscsih_negotiate_to_asyn_narrow(hd, vtarget);
+ mptscsih_negotiate_to_asyn_narrow(hd, vdevice);
if (hd->ioc->bus_type == SPI) {
if (mptscsih_is_phys_disk(hd->ioc, vtarget->target_id)) {
hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
@@ -2585,16 +2651,6 @@
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* work queue thread to clear the persitency table */
-static void
-mptscsih_sas_persist_clear_table(void * arg)
-{
- MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
-
- mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
int
mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
{
@@ -2656,13 +2712,6 @@
break;
}
- /* Persistent table is full. */
- case MPI_EVENT_PERSISTENT_TABLE_FULL:
- INIT_WORK(&mptscsih_persistTask,
- mptscsih_sas_persist_clear_table,(void *)ioc);
- schedule_work(&mptscsih_persistTask);
- break;
-
case MPI_EVENT_NONE: /* 00 */
case MPI_EVENT_LOG_DATA: /* 01 */
case MPI_EVENT_STATE_CHANGE: /* 02 */
@@ -3863,8 +3912,9 @@
*
*/
static void
-mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtTarget *vtarget)
+mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
{
+ VirtTarget *vtarget = vdevice->vtarget;
MPT_ADAPTER *ioc= hd->ioc;
SCSIDevicePage1_t *pcfg1Data;
CONFIGPARMS cfg;
@@ -3874,7 +3924,8 @@
int requested, configuration, data,i;
u8 flags, factor;
- if (ioc->bus_type != SPI)
+ if ((ioc->bus_type != SPI) ||
+ (!vdevice->configured_lun))
return;
if (!ioc->spi_data.sdp1length)
@@ -3910,7 +3961,7 @@
}
mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
&configuration, flags);
- dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
+ dnegoprintk(("nego asyn narrow: id=%d width=0 factor=MPT_ASYNC "
"offset=0 negoFlags=%x request=%x config=%x\n",
id, flags, requested, configuration));
pcfg1Data->RequestedParameters = cpu_to_le32(requested);
@@ -3923,7 +3974,7 @@
flags = vtarget->negoFlags;
mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
&configuration, flags);
- dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
+ dnegoprintk(("nego asyn narrow: id=%d width=0 factor=MPT_ASYNC "
"offset=0 negoFlags=%x request=%x config=%x\n",
vtarget->target_id, flags, requested, configuration));
pcfg1Data->RequestedParameters = cpu_to_le32(requested);
@@ -5620,5 +5671,6 @@
EXPORT_SYMBOL(mptscsih_ioc_reset);
EXPORT_SYMBOL(mptscsih_change_queue_depth);
EXPORT_SYMBOL(mptscsih_timer_expired);
+EXPORT_SYMBOL(mptscsih_TMHandler);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index d3cba12..44b248d 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -108,3 +108,4 @@
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
extern void mptscsih_timer_expired(unsigned long data);
+extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 7dce292..f148dfa 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -384,6 +384,14 @@
goto out_mptspi_probe;
}
+ /*
+ * issue internal bus reset
+ */
+ if (ioc->spi_data.bus_reset)
+ mptscsih_TMHandler(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+ 0, 0, 0, 0, 5);
+
scsi_scan_host(sh);
return 0;
@@ -445,7 +453,7 @@
mptspi_exit(void)
{
pci_unregister_driver(&mptspi_driver);
-
+
mpt_reset_deregister(mptspiDoneCtx);
dprintk((KERN_INFO MYNAM
": Deregistered for IOC reset notifications\n"));
diff --git a/drivers/misc/ibmasm/uart.c b/drivers/misc/ibmasm/uart.c
index 7e98434..9783caf 100644
--- a/drivers/misc/ibmasm/uart.c
+++ b/drivers/misc/ibmasm/uart.c
@@ -50,7 +50,7 @@
memset(&uport, 0, sizeof(struct uart_port));
uport.irq = sp->irq;
uport.uartclk = 3686400;
- uport.flags = UPF_AUTOPROBE | UPF_SHARE_IRQ;
+ uport.flags = UPF_SHARE_IRQ;
uport.iotype = UPIO_MEM;
uport.membase = iomem_base;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 626508a..6a6a084 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2034,13 +2034,28 @@
It does not support the link failover and network management
features that "portable" vendor supplied sk98lin driver does.
+ This driver supports adapters based on the original Yukon chipset:
+ Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+ Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+ It does not support the newer Yukon2 chipset: a separate driver,
+ sky2, is provided for Yukon2-based adapters.
+
+ To compile this driver as a module, choose M here: the module
+ will be called skge. This is recommended.
config SKY2
tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
select CRC32
---help---
- This driver support the Marvell Yukon 2 Gigabit Ethernet adapter.
+ This driver supports Gigabit Ethernet adapters based on the the
+ Marvell Yukon 2 chipset:
+ Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+ This driver does not support the original Yukon chipset: a seperate
+ driver, skge, is provided for Yukon-based adapters.
To compile this driver as a module, choose M here: the module
will be called sky2. This is recommended.
@@ -2050,8 +2065,15 @@
depends on PCI
---help---
Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
- compliant Gigabit Ethernet Adapter. The following adapters are supported
- by this driver:
+ compliant Gigabit Ethernet Adapter.
+
+ This driver supports the original Yukon chipset. A cleaner driver is
+ also available (skge) which seems to work better than this one.
+
+ This driver does not support the newer Yukon2 chipset. A seperate
+ driver, sky2, is provided to support Yukon2-based adapters.
+
+ The following adapters are supported by this driver:
- 3Com 3C940 Gigabit LOM Ethernet Adapter
- 3Com 3C941 Gigabit LOM Ethernet Adapter
- Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index b8953de..b508812 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -1002,6 +1002,8 @@
mac1 = 0;
for(i = 0; i < 4; i++) {
+ int tmp;
+
mac1 = mac1 << 8;
tmp = read_eeprom_byte(dev, 0x8c+i);
if (tmp < 0) {
@@ -1012,6 +1014,8 @@
}
mac2 = 0;
for(i = 4; i < 8; i++) {
+ int tmp;
+
mac2 = mac2 << 8;
tmp = read_eeprom_byte(dev, 0x8c+i);
if (tmp < 0) {
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index df9d6e8..c3267e4 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1399,7 +1399,6 @@
b44_init_rings(bp);
b44_init_hw(bp);
- netif_carrier_off(dev);
b44_check_phy(bp);
err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
@@ -1464,7 +1463,7 @@
#endif
b44_halt(bp);
b44_free_rings(bp);
- netif_carrier_off(bp->dev);
+ netif_carrier_off(dev);
spin_unlock_irq(&bp->lock);
@@ -2000,6 +1999,8 @@
dev->irq = pdev->irq;
SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
+ netif_carrier_off(dev);
+
err = b44_get_invariants(bp);
if (err) {
printk(KERN_ERR PFX "Problem fetching invariants of chip, "
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 49fa1e4..a24200d 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1,6 +1,6 @@
/* bnx2.c: Broadcom NX2 network driver.
*
- * Copyright (c) 2004, 2005 Broadcom Corporation
+ * Copyright (c) 2004, 2005, 2006 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,8 +14,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.4.30"
-#define DRV_MODULE_RELDATE "October 11, 2005"
+#define DRV_MODULE_VERSION "1.4.31"
+#define DRV_MODULE_RELDATE "January 19, 2006"
#define RUN_AT(x) (jiffies + (x))
@@ -316,6 +316,10 @@
u32 val;
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ BNX2_PCICFG_INT_ACK_CMD_MASK_INT | bp->last_status_idx);
+
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | bp->last_status_idx);
val = REG_RD(bp, BNX2_HC_COMMAND);
@@ -1171,7 +1175,8 @@
}
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
- (CHIP_ID(bp) == CHIP_ID_5708_B0)) {
+ (CHIP_ID(bp) == CHIP_ID_5708_B0) ||
+ (CHIP_ID(bp) == CHIP_ID_5708_B1)) {
/* increase tx signal amplitude */
bnx2_write_phy(bp, BCM5708S_BLK_ADDR,
BCM5708S_BLK_ADDR_TX_MISC);
@@ -1326,44 +1331,78 @@
return 0;
}
+static int bnx2_test_link(struct bnx2 *);
+
static int
-bnx2_fw_sync(struct bnx2 *bp, u32 msg_data)
+bnx2_set_phy_loopback(struct bnx2 *bp)
+{
+ u32 mac_mode;
+ int rc, i;
+
+ spin_lock_bh(&bp->phy_lock);
+ rc = bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX |
+ BMCR_SPEED1000);
+ spin_unlock_bh(&bp->phy_lock);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < 10; i++) {
+ if (bnx2_test_link(bp) == 0)
+ break;
+ udelay(10);
+ }
+
+ mac_mode = REG_RD(bp, BNX2_EMAC_MODE);
+ mac_mode &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX |
+ BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK |
+ BNX2_EMAC_MODE_25G);
+
+ mac_mode |= BNX2_EMAC_MODE_PORT_GMII;
+ REG_WR(bp, BNX2_EMAC_MODE, mac_mode);
+ bp->link_up = 1;
+ return 0;
+}
+
+static int
+bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int silent)
{
int i;
u32 val;
- if (bp->fw_timed_out)
- return -EBUSY;
-
bp->fw_wr_seq++;
msg_data |= bp->fw_wr_seq;
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
/* wait for an acknowledgement. */
- for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) {
- udelay(5);
+ for (i = 0; i < (FW_ACK_TIME_OUT_MS / 10); i++) {
+ msleep(10);
val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_MB);
if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ))
break;
}
+ if ((msg_data & BNX2_DRV_MSG_DATA) == BNX2_DRV_MSG_DATA_WAIT0)
+ return 0;
/* If we timed out, inform the firmware that this is the case. */
- if (((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) &&
- ((msg_data & BNX2_DRV_MSG_DATA) != BNX2_DRV_MSG_DATA_WAIT0)) {
+ if ((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) {
+ if (!silent)
+ printk(KERN_ERR PFX "fw sync timeout, reset code = "
+ "%x\n", msg_data);
msg_data &= ~BNX2_DRV_MSG_CODE;
msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
- bp->fw_timed_out = 1;
-
return -EBUSY;
}
+ if ((val & BNX2_FW_MSG_STATUS_MASK) != BNX2_FW_MSG_STATUS_OK)
+ return -EIO;
+
return 0;
}
@@ -1657,7 +1696,7 @@
rmb();
while (sw_cons != hw_cons) {
unsigned int len;
- u16 status;
+ u32 status;
struct sw_bd *rx_buf;
struct sk_buff *skb;
@@ -1673,7 +1712,7 @@
rx_hdr = (struct l2_fhdr *) skb->data;
len = rx_hdr->l2_fhdr_pkt_len - 4;
- if (rx_hdr->l2_fhdr_errors &
+ if ((status = rx_hdr->l2_fhdr_status) &
(L2_FHDR_ERRORS_BAD_CRC |
L2_FHDR_ERRORS_PHY_DECODE |
L2_FHDR_ERRORS_ALIGNMENT |
@@ -1732,15 +1771,13 @@
}
- status = rx_hdr->l2_fhdr_status;
skb->ip_summed = CHECKSUM_NONE;
if (bp->rx_csum &&
(status & (L2_FHDR_STATUS_TCP_SEGMENT |
L2_FHDR_STATUS_UDP_DATAGRAM))) {
- u16 cksum = rx_hdr->l2_fhdr_tcp_udp_xsum;
-
- if (cksum == 0xffff)
+ if (likely((status & (L2_FHDR_ERRORS_TCP_XSUM |
+ L2_FHDR_ERRORS_UDP_XSUM)) == 0))
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
@@ -1794,7 +1831,7 @@
bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs)
{
struct net_device *dev = dev_instance;
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
prefetch(bp->status_blk);
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
@@ -1814,7 +1851,7 @@
bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
{
struct net_device *dev = dev_instance;
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
/* When using INTx, it is possible for the interrupt to arrive
* at the CPU before the status block posted prior to the
@@ -1859,7 +1896,7 @@
static int
bnx2_poll(struct net_device *dev, int *budget)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if ((bp->status_blk->status_attn_bits &
STATUS_ATTN_BITS_LINK_STATE) !=
@@ -1891,9 +1928,20 @@
if (!bnx2_has_work(bp)) {
netif_rx_complete(dev);
+ if (likely(bp->flags & USING_MSI_FLAG)) {
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ bp->last_status_idx);
+ return 0;
+ }
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
- BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
- bp->last_status_idx);
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ BNX2_PCICFG_INT_ACK_CMD_MASK_INT |
+ bp->last_status_idx);
+
+ REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
+ bp->last_status_idx);
return 0;
}
@@ -1906,7 +1954,7 @@
static void
bnx2_set_rx_mode(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u32 rx_mode, sort_mode;
int i;
@@ -1916,11 +1964,11 @@
BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
#ifdef BCM_VLAN
- if (!bp->vlgrp) {
+ if (!bp->vlgrp && !(bp->flags & ASF_ENABLE_FLAG))
rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
- }
#else
- rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
+ if (!(bp->flags & ASF_ENABLE_FLAG))
+ rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
#endif
if (dev->flags & IFF_PROMISC) {
/* Promiscuous mode. */
@@ -2338,7 +2386,6 @@
val |= BNX2_EMAC_MODE_PORT_MII |
BNX2_EMAC_MODE_MPKT_RCVD |
BNX2_EMAC_MODE_ACPI_RCVD |
- BNX2_EMAC_MODE_FORCE_LINK |
BNX2_EMAC_MODE_MPKT;
REG_WR(bp, BNX2_EMAC_MODE, val);
@@ -2374,7 +2421,8 @@
wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
}
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg);
+ if (!(bp->flags & NO_WOL_FLAG))
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 0);
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
if ((CHIP_ID(bp) == CHIP_ID_5706_A0) ||
@@ -2708,9 +2756,16 @@
if (j == entry_count) {
bp->flash_info = NULL;
printk(KERN_ALERT PFX "Unknown flash/EEPROM type.\n");
- rc = -ENODEV;
+ return -ENODEV;
}
+ val = REG_RD_IND(bp, bp->shmem_base + BNX2_SHARED_HW_CFG_CONFIG2);
+ val &= BNX2_SHARED_HW_CFG2_NVM_SIZE_MASK;
+ if (val)
+ bp->flash_size = val;
+ else
+ bp->flash_size = bp->flash_info->total_size;
+
return rc;
}
@@ -3014,16 +3069,14 @@
val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS);
udelay(5);
+ /* Wait for the firmware to tell us it is ok to issue a reset. */
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1);
+
/* Deposit a driver reset signature so the firmware knows that
* this is a soft reset. */
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_RESET_SIGNATURE,
BNX2_DRV_RESET_SIGNATURE_MAGIC);
- bp->fw_timed_out = 0;
-
- /* Wait for the firmware to tell us it is ok to issue a reset. */
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code);
-
/* Do a dummy read to force the chip to complete all current transaction
* before we issue a reset. */
val = REG_RD(bp, BNX2_MISC_ID);
@@ -3062,10 +3115,10 @@
return -ENODEV;
}
- bp->fw_timed_out = 0;
-
/* Wait for the firmware to finish its initialization. */
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code);
+ rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code, 0);
+ if (rc)
+ return rc;
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
/* Adjust the voltage regular to two steps lower. The default
@@ -3083,6 +3136,7 @@
bnx2_init_chip(struct bnx2 *bp)
{
u32 val;
+ int rc;
/* Make sure the interrupt is not active. */
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
@@ -3098,7 +3152,7 @@
val |= (0x2 << 20) | (1 << 11);
- if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz = 133))
+ if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz == 133))
val |= (1 << 23);
if ((CHIP_NUM(bp) == CHIP_NUM_5706) &&
@@ -3218,17 +3272,22 @@
REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE);
+ if (REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_FEATURE) &
+ BNX2_PORT_FEATURE_ASF_ENABLED)
+ bp->flags |= ASF_ENABLE_FLAG;
+
/* Initialize the receive filter. */
bnx2_set_rx_mode(bp->dev);
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET);
+ rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET,
+ 0);
REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff);
REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS);
udelay(20);
- return 0;
+ return rc;
}
@@ -3880,26 +3939,33 @@
return ret;
}
+#define BNX2_MAC_LOOPBACK 0
+#define BNX2_PHY_LOOPBACK 1
+
static int
-bnx2_test_loopback(struct bnx2 *bp)
+bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
{
unsigned int pkt_size, num_pkts, i;
struct sk_buff *skb, *rx_skb;
unsigned char *packet;
- u16 rx_start_idx, rx_idx, send_idx;
- u32 send_bseq, val;
+ u16 rx_start_idx, rx_idx;
+ u32 val;
dma_addr_t map;
struct tx_bd *txbd;
struct sw_bd *rx_buf;
struct l2_fhdr *rx_hdr;
int ret = -ENODEV;
- if (!netif_running(bp->dev))
- return -ENODEV;
-
- bp->loopback = MAC_LOOPBACK;
- bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_DIAG);
- bnx2_set_mac_loopback(bp);
+ if (loopback_mode == BNX2_MAC_LOOPBACK) {
+ bp->loopback = MAC_LOOPBACK;
+ bnx2_set_mac_loopback(bp);
+ }
+ else if (loopback_mode == BNX2_PHY_LOOPBACK) {
+ bp->loopback = 0;
+ bnx2_set_phy_loopback(bp);
+ }
+ else
+ return -EINVAL;
pkt_size = 1514;
skb = dev_alloc_skb(pkt_size);
@@ -3921,11 +3987,9 @@
udelay(5);
rx_start_idx = bp->status_blk->status_rx_quick_consumer_index0;
- send_idx = 0;
- send_bseq = 0;
num_pkts = 0;
- txbd = &bp->tx_desc_ring[send_idx];
+ txbd = &bp->tx_desc_ring[TX_RING_IDX(bp->tx_prod)];
txbd->tx_bd_haddr_hi = (u64) map >> 32;
txbd->tx_bd_haddr_lo = (u64) map & 0xffffffff;
@@ -3933,13 +3997,11 @@
txbd->tx_bd_vlan_tag_flags = TX_BD_FLAGS_START | TX_BD_FLAGS_END;
num_pkts++;
- send_idx = NEXT_TX_BD(send_idx);
+ bp->tx_prod = NEXT_TX_BD(bp->tx_prod);
+ bp->tx_prod_bseq += pkt_size;
- send_bseq += pkt_size;
-
- REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, send_idx);
- REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, send_bseq);
-
+ REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, bp->tx_prod);
+ REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq);
udelay(100);
@@ -3952,7 +4014,7 @@
pci_unmap_single(bp->pdev, map, pkt_size, PCI_DMA_TODEVICE);
dev_kfree_skb_irq(skb);
- if (bp->status_blk->status_tx_quick_consumer_index0 != send_idx) {
+ if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_prod) {
goto loopback_test_done;
}
@@ -3971,7 +4033,7 @@
pci_unmap_addr(rx_buf, mapping),
bp->rx_buf_size, PCI_DMA_FROMDEVICE);
- if (rx_hdr->l2_fhdr_errors &
+ if (rx_hdr->l2_fhdr_status &
(L2_FHDR_ERRORS_BAD_CRC |
L2_FHDR_ERRORS_PHY_DECODE |
L2_FHDR_ERRORS_ALIGNMENT |
@@ -3998,6 +4060,30 @@
return ret;
}
+#define BNX2_MAC_LOOPBACK_FAILED 1
+#define BNX2_PHY_LOOPBACK_FAILED 2
+#define BNX2_LOOPBACK_FAILED (BNX2_MAC_LOOPBACK_FAILED | \
+ BNX2_PHY_LOOPBACK_FAILED)
+
+static int
+bnx2_test_loopback(struct bnx2 *bp)
+{
+ int rc = 0;
+
+ if (!netif_running(bp->dev))
+ return BNX2_LOOPBACK_FAILED;
+
+ bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET);
+ spin_lock_bh(&bp->phy_lock);
+ bnx2_init_phy(bp);
+ spin_unlock_bh(&bp->phy_lock);
+ if (bnx2_run_loopback(bp, BNX2_MAC_LOOPBACK))
+ rc |= BNX2_MAC_LOOPBACK_FAILED;
+ if (bnx2_run_loopback(bp, BNX2_PHY_LOOPBACK))
+ rc |= BNX2_PHY_LOOPBACK_FAILED;
+ return rc;
+}
+
#define NVRAM_SIZE 0x200
#define CRC32_RESIDUAL 0xdebb20e3
@@ -4167,7 +4253,7 @@
static int
bnx2_open(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int rc;
bnx2_set_power_state(bp, PCI_D0);
@@ -4280,7 +4366,7 @@
static void
bnx2_tx_timeout(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
/* This allows the netif to be shutdown gracefully before resetting */
schedule_work(&bp->reset_task);
@@ -4291,7 +4377,7 @@
static void
bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bnx2_netif_stop(bp);
@@ -4305,7 +4391,7 @@
static void
bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bnx2_netif_stop(bp);
@@ -4326,7 +4412,7 @@
static int
bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
dma_addr_t mapping;
struct tx_bd *txbd;
struct sw_bd *tx_buf;
@@ -4455,7 +4541,7 @@
static int
bnx2_close(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u32 reset_code;
/* Calling flush_scheduled_work() may deadlock because
@@ -4467,7 +4553,9 @@
bnx2_netif_stop(bp);
del_timer_sync(&bp->timer);
- if (bp->wol)
+ if (bp->flags & NO_WOL_FLAG)
+ reset_code = BNX2_DRV_MSG_CODE_UNLOAD;
+ else if (bp->wol)
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
else
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
@@ -4501,7 +4589,7 @@
static struct net_device_stats *
bnx2_get_stats(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
struct statistics_block *stats_blk = bp->stats_blk;
struct net_device_stats *net_stats = &bp->net_stats;
@@ -4575,7 +4663,7 @@
static int
bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
cmd->supported = SUPPORTED_Autoneg;
if (bp->phy_flags & PHY_SERDES_FLAG) {
@@ -4622,7 +4710,7 @@
static int
bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u8 autoneg = bp->autoneg;
u8 req_duplex = bp->req_duplex;
u16 req_line_speed = bp->req_line_speed;
@@ -4694,7 +4782,7 @@
static void
bnx2_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
strcpy(info->driver, DRV_MODULE_NAME);
strcpy(info->version, DRV_MODULE_VERSION);
@@ -4702,15 +4790,14 @@
info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0';
info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0';
info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0';
- info->fw_version[6] = (bp->fw_ver & 0xff) + '0';
- info->fw_version[1] = info->fw_version[3] = info->fw_version[5] = '.';
- info->fw_version[7] = 0;
+ info->fw_version[1] = info->fw_version[3] = '.';
+ info->fw_version[5] = 0;
}
static void
bnx2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (bp->flags & NO_WOL_FLAG) {
wol->supported = 0;
@@ -4729,7 +4816,7 @@
static int
bnx2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (wol->wolopts & ~WAKE_MAGIC)
return -EINVAL;
@@ -4749,7 +4836,7 @@
static int
bnx2_nway_reset(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u32 bmcr;
if (!(bp->autoneg & AUTONEG_SPEED)) {
@@ -4785,19 +4872,19 @@
static int
bnx2_get_eeprom_len(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
- if (bp->flash_info == 0)
+ if (bp->flash_info == NULL)
return 0;
- return (int) bp->flash_info->total_size;
+ return (int) bp->flash_size;
}
static int
bnx2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
u8 *eebuf)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int rc;
/* parameters already validated in ethtool_get_eeprom */
@@ -4811,7 +4898,7 @@
bnx2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
u8 *eebuf)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int rc;
/* parameters already validated in ethtool_set_eeprom */
@@ -4824,7 +4911,7 @@
static int
bnx2_get_coalesce(struct net_device *dev, struct ethtool_coalesce *coal)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
memset(coal, 0, sizeof(struct ethtool_coalesce));
@@ -4846,7 +4933,7 @@
static int
bnx2_set_coalesce(struct net_device *dev, struct ethtool_coalesce *coal)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
if (bp->rx_ticks > 0x3ff) bp->rx_ticks = 0x3ff;
@@ -4890,7 +4977,7 @@
static void
bnx2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
ering->rx_max_pending = MAX_RX_DESC_CNT;
ering->rx_mini_max_pending = 0;
@@ -4907,7 +4994,7 @@
static int
bnx2_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if ((ering->rx_pending > MAX_RX_DESC_CNT) ||
(ering->tx_pending > MAX_TX_DESC_CNT) ||
@@ -4930,7 +5017,7 @@
static void
bnx2_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
epause->autoneg = ((bp->autoneg & AUTONEG_FLOW_CTRL) != 0);
epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) != 0);
@@ -4940,7 +5027,7 @@
static int
bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bp->req_flow_ctrl = 0;
if (epause->rx_pause)
@@ -4967,7 +5054,7 @@
static u32
bnx2_get_rx_csum(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
return bp->rx_csum;
}
@@ -4975,7 +5062,7 @@
static int
bnx2_set_rx_csum(struct net_device *dev, u32 data)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
bp->rx_csum = data;
return 0;
@@ -5124,7 +5211,7 @@
static void
bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS);
if (etest->flags & ETH_TEST_FL_OFFLINE) {
@@ -5140,10 +5227,8 @@
buf[1] = 1;
etest->flags |= ETH_TEST_FL_FAILED;
}
- if (bnx2_test_loopback(bp) != 0) {
- buf[2] = 1;
+ if ((buf[2] = bnx2_test_loopback(bp)) != 0)
etest->flags |= ETH_TEST_FL_FAILED;
- }
if (!netif_running(bp->dev)) {
bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET);
@@ -5200,7 +5285,7 @@
bnx2_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats, u64 *buf)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int i;
u32 *hw_stats = (u32 *) bp->stats_blk;
u8 *stats_len_arr = NULL;
@@ -5240,7 +5325,7 @@
static int
bnx2_phys_id(struct net_device *dev, u32 data)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int i;
u32 save;
@@ -5312,7 +5397,7 @@
bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *data = if_mii(ifr);
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
int err;
switch(cmd) {
@@ -5354,7 +5439,7 @@
bnx2_change_mac_addr(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (!is_valid_ether_addr(addr->sa_data))
return -EINVAL;
@@ -5370,7 +5455,7 @@
static int
bnx2_change_mtu(struct net_device *dev, int new_mtu)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (((new_mtu + ETH_HLEN) > MAX_ETHERNET_JUMBO_PACKET_SIZE) ||
((new_mtu + ETH_HLEN) < MIN_ETHERNET_PACKET_SIZE))
@@ -5391,7 +5476,7 @@
static void
poll_bnx2(struct net_device *dev)
{
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
disable_irq(bp->pdev->irq);
bnx2_interrupt(bp->pdev->irq, dev, NULL);
@@ -5409,7 +5494,7 @@
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- bp = dev->priv;
+ bp = netdev_priv(dev);
bp->flags = 0;
bp->phy_flags = 0;
@@ -5629,6 +5714,9 @@
}
}
+ if (CHIP_NUM(bp) == CHIP_NUM_5708)
+ bp->flags |= NO_WOL_FLAG;
+
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
bp->tx_quick_cons_trip_int =
bp->tx_quick_cons_trip;
@@ -5725,7 +5813,7 @@
dev->ethtool_ops = &bnx2_ethtool_ops;
dev->weight = 64;
- bp = dev->priv;
+ bp = netdev_priv(dev);
#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
dev->poll_controller = poll_bnx2;
@@ -5784,7 +5872,7 @@
bnx2_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
flush_scheduled_work();
@@ -5803,7 +5891,7 @@
bnx2_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
u32 reset_code;
if (!netif_running(dev))
@@ -5812,7 +5900,9 @@
bnx2_netif_stop(bp);
netif_device_detach(dev);
del_timer_sync(&bp->timer);
- if (bp->wol)
+ if (bp->flags & NO_WOL_FLAG)
+ reset_code = BNX2_DRV_MSG_CODE_UNLOAD;
+ else if (bp->wol)
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
else
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
@@ -5826,7 +5916,7 @@
bnx2_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2 *bp = dev->priv;
+ struct bnx2 *bp = netdev_priv(dev);
if (!netif_running(dev))
return 0;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 76bb5f1..9f691cb 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -1,6 +1,6 @@
/* bnx2.h: Broadcom NX2 network driver.
*
- * Copyright (c) 2004, 2005 Broadcom Corporation
+ * Copyright (c) 2004, 2005, 2006 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -277,19 +277,7 @@
* l2_fhdr definition
*/
struct l2_fhdr {
-#if defined(__BIG_ENDIAN)
- u16 l2_fhdr_errors;
- u16 l2_fhdr_status;
-#elif defined(__LITTLE_ENDIAN)
- u16 l2_fhdr_status;
- u16 l2_fhdr_errors;
-#endif
- #define L2_FHDR_ERRORS_BAD_CRC (1<<1)
- #define L2_FHDR_ERRORS_PHY_DECODE (1<<2)
- #define L2_FHDR_ERRORS_ALIGNMENT (1<<3)
- #define L2_FHDR_ERRORS_TOO_SHORT (1<<4)
- #define L2_FHDR_ERRORS_GIANT_FRAME (1<<5)
-
+ u32 l2_fhdr_status;
#define L2_FHDR_STATUS_RULE_CLASS (0x7<<0)
#define L2_FHDR_STATUS_RULE_P2 (1<<3)
#define L2_FHDR_STATUS_RULE_P3 (1<<4)
@@ -301,6 +289,14 @@
#define L2_FHDR_STATUS_TCP_SEGMENT (1<<14)
#define L2_FHDR_STATUS_UDP_DATAGRAM (1<<15)
+ #define L2_FHDR_ERRORS_BAD_CRC (1<<17)
+ #define L2_FHDR_ERRORS_PHY_DECODE (1<<18)
+ #define L2_FHDR_ERRORS_ALIGNMENT (1<<19)
+ #define L2_FHDR_ERRORS_TOO_SHORT (1<<20)
+ #define L2_FHDR_ERRORS_GIANT_FRAME (1<<21)
+ #define L2_FHDR_ERRORS_TCP_XSUM (1<<28)
+ #define L2_FHDR_ERRORS_UDP_XSUM (1<<31)
+
u32 l2_fhdr_hash;
#if defined(__BIG_ENDIAN)
u16 l2_fhdr_pkt_len;
@@ -3956,6 +3952,7 @@
#define NO_WOL_FLAG 8
#define USING_DAC_FLAG 0x10
#define USING_MSI_FLAG 0x20
+#define ASF_ENABLE_FLAG 0x40
u32 phy_flags;
#define PHY_SERDES_FLAG 1
@@ -3986,6 +3983,7 @@
#define CHIP_ID_5706_A2 0x57060020
#define CHIP_ID_5708_A0 0x57080000
#define CHIP_ID_5708_B0 0x57081000
+#define CHIP_ID_5708_B1 0x57081010
#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf)
@@ -3998,7 +3996,7 @@
u16 bus_speed_mhz;
u8 wol;
- u8 fw_timed_out;
+ u8 pad;
u16 fw_wr_seq;
u16 fw_drv_pulse_wr_seq;
@@ -4074,6 +4072,7 @@
struct net_device_stats net_stats;
struct flash_spec *flash_info;
+ u32 flash_size;
};
static u32 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset);
@@ -4172,7 +4171,7 @@
* the firmware has timed out, the driver will assume there is no firmware
* running and there won't be any firmware-driver synchronization during a
* driver reset. */
-#define FW_ACK_TIME_OUT_MS 50
+#define FW_ACK_TIME_OUT_MS 100
#define BNX2_DRV_RESET_SIGNATURE 0x00000000
@@ -4275,6 +4274,9 @@
#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY1 0x100
#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY2 0x200
+#define BNX2_SHARED_HW_CFG_CONFIG2 0x00000040
+#define BNX2_SHARED_HW_CFG2_NVM_SIZE_MASK 0x00fff000
+
#define BNX2_DEV_INFO_BC_REV 0x0000004c
#define BNX2_PORT_HW_CFG_MAC_UPPER 0x00000050
diff --git a/drivers/net/bnx2_fw.h b/drivers/net/bnx2_fw.h
index ab07a49..0c21bd8 100644
--- a/drivers/net/bnx2_fw.h
+++ b/drivers/net/bnx2_fw.h
@@ -1,6 +1,6 @@
/* bnx2_fw.h: Broadcom NX2 network driver.
*
- * Copyright (c) 2004, 2005 Broadcom Corporation
+ * Copyright (c) 2004, 2005, 2006 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -978,20 +978,20 @@
static int bnx2_RXP_b06FwReleaseMajor = 0x1;
static int bnx2_RXP_b06FwReleaseMinor = 0x0;
static int bnx2_RXP_b06FwReleaseFix = 0x0;
-static u32 bnx2_RXP_b06FwStartAddr = 0x08003104;
+static u32 bnx2_RXP_b06FwStartAddr = 0x08003184;
static u32 bnx2_RXP_b06FwTextAddr = 0x08000000;
-static int bnx2_RXP_b06FwTextLen = 0x562c;
-static u32 bnx2_RXP_b06FwDataAddr = 0x08005660;
+static int bnx2_RXP_b06FwTextLen = 0x588c;
+static u32 bnx2_RXP_b06FwDataAddr = 0x080058e0;
static int bnx2_RXP_b06FwDataLen = 0x0;
-static u32 bnx2_RXP_b06FwRodataAddr = 0x00000000;
-static int bnx2_RXP_b06FwRodataLen = 0x0;
-static u32 bnx2_RXP_b06FwBssAddr = 0x08005680;
-static int bnx2_RXP_b06FwBssLen = 0x1394;
-static u32 bnx2_RXP_b06FwSbssAddr = 0x08005660;
-static int bnx2_RXP_b06FwSbssLen = 0x18;
-static u32 bnx2_RXP_b06FwText[(0x562c/4) + 1] = {
- 0x0a000c41, 0x00000000, 0x00000000, 0x0000000d, 0x72787020, 0x322e352e,
- 0x38000000, 0x02050803, 0x00000000, 0x0000000d, 0x00000000, 0x00000000,
+static u32 bnx2_RXP_b06FwRodataAddr = 0x08005890;
+static int bnx2_RXP_b06FwRodataLen = 0x28;
+static u32 bnx2_RXP_b06FwBssAddr = 0x08005900;
+static int bnx2_RXP_b06FwBssLen = 0x13a4;
+static u32 bnx2_RXP_b06FwSbssAddr = 0x080058e0;
+static int bnx2_RXP_b06FwSbssLen = 0x1c;
+static u32 bnx2_RXP_b06FwText[(0x588c/4) + 1] = {
+ 0x0a000c61, 0x00000000, 0x00000000, 0x0000000d, 0x72787020, 0x322e362e,
+ 0x31000000, 0x02060103, 0x00000000, 0x0000000d, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
@@ -1513,408 +1513,435 @@
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x10000003, 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, 0x24425660,
- 0x3c030800, 0x24636a14, 0xac400000, 0x0043202b, 0x1480fffd, 0x24420004,
- 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, 0x3c100800, 0x26103104, 0x3c1c0800,
- 0x279c5660, 0x0e001035, 0x00000000, 0x0000000d, 0x3c080800, 0x8d023100,
- 0x2c420080, 0x50400001, 0xad003100, 0x8d073100, 0x3c040800, 0x24840100,
- 0x8f460100, 0x00071840, 0x00671821, 0x00031940, 0x00641021, 0xac460000,
- 0x8f450104, 0x00831021, 0xac450004, 0x8f460108, 0xac460008, 0x8f45010c,
- 0xac45000c, 0x8f460114, 0xac460010, 0x8f450118, 0xac450014, 0x8f460124,
- 0xac460018, 0x8f450128, 0xac45001c, 0x8f464010, 0xac460020, 0x8f454014,
- 0xac450024, 0x8f464018, 0xac460028, 0x8f45401c, 0xac45002c, 0x8f464020,
- 0xac460030, 0x8f454024, 0xac450034, 0x8f464028, 0xac460038, 0x8f45402c,
- 0xac45003c, 0x8f464030, 0xac460040, 0x8f454034, 0xac450044, 0x8f464038,
- 0xac460048, 0x8f45403c, 0xac45004c, 0x8f464040, 0xac460050, 0x8f454044,
- 0xac450054, 0x8f464048, 0xac460058, 0x8f45404c, 0x24e70001, 0x00402021,
- 0xad073100, 0x03e00008, 0xac85005c, 0x8f820004, 0x9743010c, 0x00804821,
- 0x00403021, 0x30421000, 0x10400010, 0x306affff, 0x30c20020, 0x1440000e,
- 0x24070005, 0x3c021000, 0x00c21024, 0x10400009, 0x3c030dff, 0x3463ffff,
- 0x3c020e00, 0x00c21024, 0x0062182b, 0x50600004, 0x24070001, 0x0a000cb1,
- 0x3c020800, 0x24070001, 0x3c020800, 0x8c430034, 0x1460001d, 0x00405821,
- 0x8f820010, 0x30424000, 0x1440001a, 0x3c020001, 0x3c021f01, 0x00c24024,
- 0x3c031000, 0x15030015, 0x3c020001, 0x31420200, 0x54400012, 0x3c020001,
- 0x9744010e, 0x24020003, 0xa342018b, 0x97850012, 0x24020002, 0x34e30002,
- 0xaf400180, 0xa742018c, 0xa7430188, 0x24840004, 0x30a5bfff, 0xa744018e,
- 0xa74501a6, 0xaf4801b8, 0x03e00008, 0x00001021, 0x3c020001, 0x00c21024,
- 0x10400039, 0x00000000, 0x9742010e, 0x3c038000, 0x3046ffff, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97840006, 0x8f85000c,
- 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0x10a00005,
- 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000cec, 0x00021400, 0x9743011e,
- 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010, 0x24020003,
- 0x30838000, 0x1060000d, 0xa7420188, 0x93420116, 0x304200fc, 0x005a1021,
- 0x24424004, 0x8c430000, 0x3063ffff, 0x14600005, 0x00000000, 0x3c02ffff,
- 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104,
- 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
- 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x8f820010, 0x30434000,
- 0x10600016, 0x00404021, 0x3c020f00, 0x00c21024, 0x14400012, 0x00000000,
- 0x93420116, 0x34424000, 0x03421821, 0x94650002, 0x2ca21389, 0x1040000b,
- 0x3c020800, 0x24425680, 0x00051942, 0x00031880, 0x00621821, 0x30a5001f,
- 0x8c640000, 0x24020001, 0x00a21004, 0x00822024, 0x01244825, 0x11200039,
- 0x3c021000, 0x9742010e, 0x34e70002, 0x3c038000, 0x24420004, 0x3046ffff,
- 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97840006,
- 0x8f85000c, 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e,
- 0x10a00005, 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000d41, 0x00021400,
- 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010,
- 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021,
- 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
- 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff,
- 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
- 0xaf4201b8, 0x03e00008, 0x00001021, 0x00c21024, 0x104000e3, 0x3c020800,
- 0x8c430030, 0x10600040, 0x31024000, 0x1040003e, 0x3c030f00, 0x00c31824,
- 0x3c020100, 0x0043102b, 0x1440003a, 0x3c030800, 0x9742010e, 0x34e70002,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d, 0x0000000d,
+ 0x3c020800, 0x244258e0, 0x3c030800, 0x24636ca4, 0xac400000, 0x0043202b,
+ 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, 0x3c100800,
+ 0x26103184, 0x3c1c0800, 0x279c58e0, 0x0e00104a, 0x00000000, 0x0000000d,
+ 0x27bdffe8, 0xafb00010, 0xafbf0014, 0x0e000f1d, 0x00808021, 0x1440000d,
+ 0x00000000, 0x8f820010, 0x10400005, 0x00000000, 0x9743011c, 0x9742011e,
+ 0x0a000c89, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825,
+ 0xaf830004, 0x8f840008, 0x3c020020, 0x34424000, 0x00821824, 0x54620004,
+ 0x3c020020, 0x8f820014, 0x0a000c9a, 0x34421000, 0x34428000, 0x00821824,
+ 0x14620004, 0x00000000, 0x8f820014, 0x34428000, 0xaf820014, 0x8f820008,
+ 0x9743010c, 0x00403021, 0x30421000, 0x10400010, 0x3069ffff, 0x30c20020,
+ 0x1440000e, 0x24070005, 0x3c021000, 0x00c21024, 0x10400009, 0x3c030dff,
+ 0x3463ffff, 0x3c020e00, 0x00c21024, 0x0062182b, 0x50600004, 0x24070001,
+ 0x0a000cb2, 0x3c020800, 0x24070001, 0x3c020800, 0x8c430034, 0x1460001d,
+ 0x00405821, 0x8f820014, 0x30424000, 0x1440001a, 0x3c020001, 0x3c021f01,
+ 0x00c24024, 0x3c031000, 0x15030015, 0x3c020001, 0x31220200, 0x14400012,
+ 0x3c020001, 0x9744010e, 0x24020003, 0xa342018b, 0x97850016, 0x24020002,
+ 0x34e30002, 0xaf400180, 0xa742018c, 0xa7430188, 0x24840004, 0x30a5bfff,
+ 0xa744018e, 0xa74501a6, 0xaf4801b8, 0x0a000f19, 0x00001021, 0x3c020001,
+ 0x00c21024, 0x1040002f, 0x00000000, 0x9742010e, 0x3c038000, 0x3046ffff,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x9784000a,
+ 0x8f850004, 0x8f870014, 0x24020080, 0x24030002, 0xaf420180, 0x24020003,
+ 0xa743018c, 0xa746018e, 0xa7420188, 0x30e28000, 0xa7440190, 0x1040000c,
+ 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000,
+ 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00e21024, 0xaf820014,
+ 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff,
+ 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x0a000f19,
+ 0x00001021, 0x8f820014, 0x30434000, 0x10600016, 0x00404021, 0x3c020f00,
+ 0x00c21024, 0x14400012, 0x00000000, 0x93420116, 0x34424000, 0x03421821,
+ 0x94650002, 0x2ca21389, 0x1040000b, 0x3c020800, 0x24425900, 0x00051942,
+ 0x00031880, 0x00621821, 0x30a5001f, 0x8c640000, 0x24020001, 0x00a21004,
+ 0x00822024, 0x02048025, 0x12000030, 0x3c021000, 0x9742010e, 0x34e80002,
0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
- 0x24020003, 0xa342018b, 0x97840006, 0x8f85000c, 0x24020080, 0x24030002,
- 0xaf420180, 0xa743018c, 0xa746018e, 0x10a00005, 0xa7440190, 0x9743011c,
- 0x9742011e, 0x0a000d86, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400,
- 0x00621825, 0xaf4301a8, 0x8f840010, 0x30828000, 0x1040000c, 0xa7470188,
- 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff,
- 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf820010, 0x97820012,
- 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825,
- 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021,
- 0x3c030800, 0x8c620024, 0x30420008, 0x1040003e, 0x34e80002, 0x3c020f00,
- 0x00c21024, 0x1440003b, 0x8d620034, 0x31420200, 0x10400038, 0x8d620034,
- 0x9742010e, 0x30e7fffb, 0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97840006, 0x8f85000c,
- 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0x10a00005,
- 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000dca, 0x00021400, 0x9743011e,
- 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010, 0x30828000,
- 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
- 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024,
- 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
- 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
- 0x8d620034, 0x8f860004, 0x1040001a, 0x30c20100, 0x10400018, 0x3c020f00,
- 0x00c21024, 0x3c030200, 0x10430014, 0x00000000, 0x8f82000c, 0x10400004,
- 0x00000000, 0x9742011c, 0x0a000df8, 0x3044ffff, 0x9742011e, 0x3044ffff,
- 0x3c030800, 0x8c620038, 0x3c030800, 0x2463003c, 0x2442ffff, 0x00822024,
- 0x00831821, 0x90620000, 0x24420004, 0x0a000e0d, 0x000229c0, 0x00000000,
- 0x00061602, 0x3042000f, 0x000229c0, 0x3c04fc00, 0x00441021, 0x3c030300,
- 0x0062182b, 0x50600001, 0x24050800, 0x9742010e, 0x3107ffff, 0x3c038000,
+ 0x24020003, 0xa342018b, 0x9784000a, 0x8f850004, 0x8f870014, 0x24020180,
+ 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0xa7480188, 0x30e28000,
+ 0xa7440190, 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00e21024, 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x0a000f19, 0x00001021, 0x00c21024, 0x104000c0, 0x3c020800,
+ 0x8c430030, 0x10600037, 0x31024000, 0x10400035, 0x3c030f00, 0x00c31824,
+ 0x3c020100, 0x0043102b, 0x14400031, 0x3c030800, 0x9742010e, 0x34e80002,
+ 0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x24020003, 0xa342018b, 0x9784000a, 0x8f850004, 0x8f870014, 0x24020080,
+ 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0xa7480188, 0x30e28000,
+ 0xa7440190, 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x00e21024, 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x0a000f19, 0x00001021, 0x3c030800, 0x8c620024, 0x30420008,
+ 0x10400035, 0x34ea0002, 0x3c020f00, 0x00c21024, 0x14400032, 0x8d620034,
+ 0x31220200, 0x1040002f, 0x8d620034, 0x9742010e, 0x30e8fffb, 0x3c038000,
0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
- 0xa342018b, 0x97830006, 0x8f84000c, 0x24020002, 0xaf450180, 0xa742018c,
- 0xa746018e, 0x10800005, 0xa7430190, 0x9743011c, 0x9742011e, 0x0a000e26,
- 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8,
- 0x8f840010, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc,
- 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff,
- 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104,
- 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
- 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x8f424000, 0x30420100,
- 0x104000f9, 0x3c020800, 0x8c440024, 0x24030001, 0x14830038, 0x00404821,
- 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97830006, 0x8f84000c,
- 0x24020002, 0xaf400180, 0xa742018c, 0xa745018e, 0x10800005, 0xa7430190,
- 0x9743011c, 0x9742011e, 0x0a000e65, 0x00021400, 0x9743011e, 0x9742011c,
- 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010, 0x30828000, 0x1040000c,
- 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000,
- 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf820010,
- 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff,
- 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008,
- 0x00001021, 0x30820001, 0x10400037, 0x30ea0004, 0x9742010e, 0x30e8fffb,
- 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
- 0x24020003, 0xa342018b, 0x97830006, 0x8f84000c, 0x24020002, 0xaf400180,
- 0xa742018c, 0xa745018e, 0x10800005, 0xa7430190, 0x9743011c, 0x9742011e,
- 0x0a000e9f, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825,
- 0xaf4301a8, 0x8f840010, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116,
- 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004,
- 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c,
- 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6,
- 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x3107ffff, 0x8d220024, 0x30420004,
- 0x10400039, 0x8d220024, 0x9742010e, 0x30e8fffb, 0x3c038000, 0x24420004,
- 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b,
- 0x97840006, 0x8f85000c, 0x24020100, 0x24030002, 0xaf420180, 0xa743018c,
- 0xa746018e, 0x10a00005, 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000eda,
- 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8,
- 0x8f840010, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc,
- 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff,
- 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104,
- 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
- 0x3c021000, 0xaf4201b8, 0x3107ffff, 0x8d220024, 0x30420008, 0x10400036,
- 0x00000000, 0x9742010e, 0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x97840006, 0x8f85000c,
- 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0x10a00005,
- 0xa7440190, 0x9743011c, 0x9742011e, 0x0a000f14, 0x00021400, 0x9743011e,
- 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010, 0x30828000,
- 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
- 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024,
- 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
+ 0xa342018b, 0x9784000a, 0x8f850004, 0x8f870014, 0x24020180, 0x24030002,
+ 0xaf420180, 0xa743018c, 0xa746018e, 0xa7480188, 0x30e28000, 0xa7440190,
+ 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
+ 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00e21024,
+ 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
- 0x1540004a, 0x00001021, 0x27440180, 0x3c038000, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x24022000, 0x24030002, 0xa4820008, 0xa083000b, 0xa4800010,
- 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x3c030800, 0x8c620024,
- 0x30420001, 0x10400037, 0x00001021, 0x9742010e, 0x34e60002, 0x3c038000,
- 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
- 0xa342018b, 0x97830006, 0x8f84000c, 0x24020002, 0xaf400180, 0xa742018c,
- 0xa745018e, 0x10800005, 0xa7430190, 0x9743011c, 0x9742011e, 0x0a000f5e,
- 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8,
- 0x8f840010, 0x30828000, 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc,
+ 0x8d620034, 0x8f860008, 0x10400012, 0x30c20100, 0x10400010, 0x3c020f00,
+ 0x00c21024, 0x3c030200, 0x1043000c, 0x3c020800, 0x8c430038, 0x8f840004,
+ 0x3c020800, 0x2442003c, 0x2463ffff, 0x00832024, 0x00822021, 0x90830000,
+ 0x24630004, 0x0a000de1, 0x000329c0, 0x00000000, 0x00061602, 0x3042000f,
+ 0x000229c0, 0x3c04fc00, 0x00441021, 0x3c030300, 0x0062182b, 0x50600001,
+ 0x24050800, 0x9742010e, 0x3148ffff, 0x3c038000, 0x24420004, 0x3046ffff,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x9783000a,
+ 0x8f840004, 0x8f870014, 0x24020002, 0xaf450180, 0xa742018c, 0xa746018e,
+ 0xa7480188, 0x30e28000, 0xa7430190, 0x1040000c, 0xaf4401a8, 0x93420116,
+ 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004,
+ 0x3c02ffff, 0x34427fff, 0x00e21024, 0xaf820014, 0x97820016, 0x9743010c,
+ 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6,
+ 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x0a000f19, 0x00001021, 0x8f424000,
+ 0x30420100, 0x104000d5, 0x3c020800, 0x8c440024, 0x24030001, 0x1483002f,
+ 0x00405021, 0x9742010e, 0x34e70002, 0x3c038000, 0x24420004, 0x3045ffff,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x9783000a,
+ 0x8f840004, 0x8f860014, 0x24020002, 0xaf400180, 0xa742018c, 0xa745018e,
+ 0xa7470188, 0x30c28000, 0xa7430190, 0x1040000c, 0xaf4401a8, 0x93420116,
+ 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004,
+ 0x3c02ffff, 0x34427fff, 0x00c21024, 0xaf820014, 0x97820016, 0x9743010c,
+ 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6,
+ 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x0a000f19, 0x00001021, 0x30820001,
+ 0x1040002e, 0x30eb0004, 0x9742010e, 0x30e9fffb, 0x3c038000, 0x24420004,
+ 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b,
+ 0x9783000a, 0x8f840004, 0x8f860014, 0x24020002, 0xaf400180, 0xa742018c,
+ 0xa745018e, 0xa7470188, 0x30c28000, 0xa7430190, 0x1040000c, 0xaf4401a8,
+ 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff,
+ 0x14600004, 0x3c02ffff, 0x34427fff, 0x00c21024, 0xaf820014, 0x97820016,
+ 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825,
+ 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x3127ffff, 0x8d420024,
+ 0x30420004, 0x10400030, 0x8d420024, 0x9742010e, 0x30e9fffb, 0x3c038000,
+ 0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
+ 0xa342018b, 0x9784000a, 0x8f850004, 0x8f880014, 0x24020100, 0x24030002,
+ 0xaf420180, 0xa743018c, 0xa746018e, 0xa7470188, 0x31028000, 0xa7440190,
+ 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
+ 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x01021024,
+ 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
+ 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
+ 0x3127ffff, 0x8d420024, 0x30420008, 0x1040002d, 0x00000000, 0x9742010e,
+ 0x3c038000, 0x24420004, 0x3046ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x24020003, 0xa342018b, 0x9784000a, 0x8f850004, 0x8f880014, 0x24020180,
+ 0x24030002, 0xaf420180, 0xa743018c, 0xa746018e, 0xa7470188, 0x31028000,
+ 0xa7440190, 0x1040000c, 0xaf4501a8, 0x93420116, 0x304200fc, 0x005a1021,
+ 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
+ 0x01021024, 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff,
+ 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
+ 0xaf4201b8, 0x15600041, 0x00001021, 0x27440180, 0x3c038000, 0x8f4201b8,
+ 0x00431024, 0x1440fffd, 0x24022000, 0x24030002, 0xa4820008, 0xa083000b,
+ 0xa4800010, 0x3c021000, 0xaf4201b8, 0x0a000f19, 0x00001021, 0x3c030800,
+ 0x8c620024, 0x30420001, 0x1040002e, 0x00001021, 0x9742010e, 0x34e70002,
+ 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x24020003, 0xa342018b, 0x9783000a, 0x8f840004, 0x8f860014, 0x24020002,
+ 0xaf400180, 0xa742018c, 0xa745018e, 0xa7470188, 0x30c28000, 0xa7430190,
+ 0x1040000c, 0xaf4401a8, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004,
+ 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00c21024,
+ 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00,
+ 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8,
+ 0x00001021, 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x8f4b0070,
+ 0x93420112, 0x8f840008, 0x00022882, 0x30820100, 0x14400003, 0x24a30003,
+ 0x03e00008, 0x00001021, 0x30824000, 0x10400010, 0x27424000, 0x00031880,
+ 0x00431021, 0x8c470000, 0x24a30004, 0x00031880, 0x27424000, 0x00431021,
+ 0x8c490000, 0x93430116, 0x27424000, 0x306300fc, 0x00431021, 0x8c4a0000,
+ 0x0a000f45, 0x3c030800, 0x30822000, 0x1040ffea, 0x00031880, 0x27424000,
+ 0x00431021, 0x8c470000, 0x24a30004, 0x00031880, 0x27424000, 0x00431021,
+ 0x8c490000, 0x00005021, 0x3c030800, 0x24680100, 0x00071602, 0x00021080,
+ 0x00481021, 0x8c460000, 0x00071b82, 0x306303fc, 0x01031821, 0x8c640400,
+ 0x00071182, 0x304203fc, 0x01021021, 0x8c450800, 0x30e300ff, 0x00031880,
+ 0x01031821, 0x00091602, 0x00021080, 0x01021021, 0x00c43026, 0x8c640c00,
+ 0x8c431000, 0x00c53026, 0x00091382, 0x304203fc, 0x01021021, 0x8c451400,
+ 0x312200ff, 0x00021080, 0x01021021, 0x00c43026, 0x00c33026, 0x00091982,
+ 0x306303fc, 0x01031821, 0x8c641800, 0x8c431c00, 0x00c53026, 0x00c43026,
+ 0x11400015, 0x00c33026, 0x000a1602, 0x00021080, 0x01021021, 0x8c432000,
+ 0x000a1382, 0x304203fc, 0x01021021, 0x8c452400, 0x314200ff, 0x00021080,
+ 0x01021021, 0x00c33026, 0x000a1982, 0x306303fc, 0x01031821, 0x8c642800,
+ 0x8c432c00, 0x00c53026, 0x00c43026, 0x00c33026, 0x8f430070, 0x3c050800,
+ 0x8ca43100, 0x2c820020, 0x10400008, 0x006b5823, 0x3c020800, 0x24423104,
+ 0x00041880, 0x00621821, 0x24820001, 0xac6b0000, 0xaca23100, 0xaf860004,
+ 0x03e00008, 0x24020001, 0x27bdffe8, 0xafbf0010, 0x8f460128, 0x8f840010,
+ 0xaf460020, 0x8f450104, 0x8f420100, 0x24030800, 0xaf850008, 0xaf820014,
+ 0xaf4301b8, 0x1080000a, 0x3c020800, 0x8c430034, 0x10600007, 0x30a22000,
+ 0x10400005, 0x34a30100, 0x8f82000c, 0xaf830008, 0x24420001, 0xaf82000c,
+ 0x3c020800, 0x8c4300c0, 0x10600006, 0x3c030800, 0x8c6200c4, 0x24040001,
+ 0x24420001, 0x0a000fd5, 0xac6200c4, 0x8f820008, 0x3c030010, 0x00431024,
+ 0x14400009, 0x3c02001f, 0x3c030800, 0x8c620020, 0x00002021, 0x24420001,
+ 0x0e000c78, 0xac620020, 0x0a000fd5, 0x00402021, 0x3442ff00, 0x14c20009,
+ 0x2403bfff, 0x3c030800, 0x8c620020, 0x24040001, 0x24420001, 0x0e000c78,
+ 0xac620020, 0x0a000fd5, 0x00402021, 0x8f820014, 0x00431024, 0x14400006,
+ 0x00000000, 0xaf400048, 0x0e0011a9, 0xaf400040, 0x0a000fd5, 0x00402021,
+ 0x0e001563, 0x00000000, 0x00402021, 0x10800005, 0x3c024000, 0x8f430124,
+ 0x3c026020, 0xac430014, 0x3c024000, 0xaf420138, 0x00000000, 0x8fbf0010,
+ 0x03e00008, 0x27bd0018, 0x27bdffe0, 0xafbf0018, 0xafb10014, 0xafb00010,
+ 0x8f420140, 0xaf420020, 0x8f430148, 0x3c027000, 0x00621824, 0x3c023000,
+ 0x10620021, 0x0043102b, 0x14400006, 0x3c024000, 0x3c022000, 0x10620009,
+ 0x3c024000, 0x0a001040, 0x00000000, 0x10620045, 0x3c025000, 0x10620047,
+ 0x3c024000, 0x0a001040, 0x00000000, 0x27440180, 0x3c038000, 0x8f4201b8,
+ 0x00431024, 0x1440fffd, 0x00000000, 0x8f420148, 0x24030002, 0xa083000b,
+ 0x00021402, 0xa4820008, 0x8f430148, 0xa4830010, 0x8f420144, 0x3c031000,
+ 0xac820024, 0xaf4301b8, 0x0a001040, 0x3c024000, 0x8f420148, 0x24030002,
+ 0x3044ffff, 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003,
+ 0x10400005, 0x24020003, 0x0600001d, 0x36053000, 0x0a001027, 0x3c038000,
+ 0x12020007, 0x00000000, 0x0a001034, 0x00000000, 0x0e00112c, 0x00000000,
+ 0x0a001025, 0x00402021, 0x0e00113e, 0x00000000, 0x00402021, 0x36053000,
+ 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008,
+ 0xa222000b, 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8,
+ 0x0a001040, 0x3c024000, 0x0000000d, 0x00000000, 0x240002bf, 0x0a001040,
+ 0x3c024000, 0x0e001441, 0x00000000, 0x0a001040, 0x3c024000, 0x0e0015ea,
+ 0x00000000, 0x3c024000, 0xaf420178, 0x00000000, 0x8fbf0018, 0x8fb10014,
+ 0x8fb00010, 0x03e00008, 0x27bd0020, 0x24020800, 0x03e00008, 0xaf4201b8,
+ 0x27bdffe8, 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000,
+ 0x2403ff7f, 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000,
+ 0x3c020008, 0xaf430008, 0x8e040808, 0x0342d825, 0x8e020808, 0x3c030800,
+ 0xac600020, 0x3084fff0, 0x2c840001, 0x3042fff0, 0x38420010, 0x2c420001,
+ 0xaf840010, 0xaf820000, 0x0e00160c, 0x00000000, 0x0e001561, 0x00000000,
+ 0x3c020400, 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c,
+ 0x8e021980, 0x34420200, 0xae021980, 0x8f500000, 0x32020003, 0x1040fffd,
+ 0x32020001, 0x10400004, 0x32020002, 0x0e000f92, 0x00000000, 0x32020002,
+ 0x1040fff6, 0x00000000, 0x0e000fe0, 0x00000000, 0x0a001071, 0x00000000,
+ 0x27bdffe8, 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000,
+ 0x2403ff7f, 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000,
+ 0x3c020008, 0xaf430008, 0x8e040808, 0x0342d825, 0x8e020808, 0x3c030800,
+ 0xac600020, 0x3084fff0, 0x2c840001, 0x3042fff0, 0x38420010, 0x2c420001,
+ 0xaf840010, 0xaf820000, 0x0e00160c, 0x00000000, 0x0e001561, 0x00000000,
+ 0x3c020400, 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c,
+ 0x8e021980, 0x8fbf0014, 0x34420200, 0xae021980, 0x8fb00010, 0x03e00008,
+ 0x27bd0018, 0x00804821, 0x30a5ffff, 0x30c6ffff, 0x30e7ffff, 0x3c038000,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x9783000a,
+ 0x8f840004, 0x8f880014, 0xaf490180, 0xa745018c, 0xa746018e, 0xa7470188,
+ 0x31028000, 0xa7430190, 0x1040000c, 0xaf4401a8, 0x93420116, 0x304200fc,
0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff,
- 0x34427fff, 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104,
+ 0x34427fff, 0x01021024, 0xaf820014, 0x97820016, 0x9743010c, 0x8f440104,
0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac,
- 0x3c021000, 0xaf4201b8, 0x00001021, 0x03e00008, 0x00000000, 0x27bdffe8,
- 0xafbf0010, 0x8f460128, 0x8f84000c, 0xaf460020, 0x8f450104, 0x8f420100,
- 0x24030800, 0xaf850004, 0xaf820010, 0xaf4301b8, 0x1080000a, 0x3c020800,
- 0x8c430034, 0x10600007, 0x30a22000, 0x10400005, 0x34a30100, 0x8f820008,
- 0xaf830004, 0x24420001, 0xaf820008, 0x3c020800, 0x8c4300c0, 0x10600006,
- 0x3c030800, 0x8c6200c4, 0x24040001, 0x24420001, 0x0a000fc0, 0xac6200c4,
- 0x8f820004, 0x3c030010, 0x00431024, 0x14400009, 0x3c02001f, 0x3c030800,
- 0x8c620020, 0x00002021, 0x24420001, 0x0e000c99, 0xac620020, 0x0a000fc0,
- 0x00402021, 0x3442ff00, 0x14c20009, 0x2403bfff, 0x3c030800, 0x8c620020,
- 0x24040001, 0x24420001, 0x0e000c99, 0xac620020, 0x0a000fc0, 0x00402021,
- 0x8f820010, 0x00431024, 0x14400006, 0x00000000, 0xaf400048, 0x0e001144,
- 0xaf400040, 0x0a000fc0, 0x00402021, 0x0e0014c9, 0x00000000, 0x00402021,
- 0x10800005, 0x3c024000, 0x8f430124, 0x3c026020, 0xac430014, 0x3c024000,
- 0xaf420138, 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe0,
- 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420140, 0xaf420020, 0x8f430148,
- 0x3c027000, 0x00621824, 0x3c023000, 0x10620021, 0x0043102b, 0x14400006,
- 0x3c024000, 0x3c022000, 0x10620009, 0x3c024000, 0x0a00102b, 0x00000000,
- 0x10620045, 0x3c025000, 0x10620047, 0x3c024000, 0x0a00102b, 0x00000000,
+ 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00000000, 0x27440180, 0x3c038000,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24022000, 0x24030002, 0xa4820008,
+ 0xa083000b, 0xa4800010, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00000000,
0x27440180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000,
0x8f420148, 0x24030002, 0xa083000b, 0x00021402, 0xa4820008, 0x8f430148,
- 0xa4830010, 0x8f420144, 0x3c031000, 0xac820024, 0xaf4301b8, 0x0a00102b,
- 0x3c024000, 0x8f420148, 0x24030002, 0x3044ffff, 0x00021402, 0x305000ff,
- 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, 0x24020003, 0x0600001d,
- 0x36053000, 0x0a001012, 0x3c038000, 0x12020007, 0x00000000, 0x0a00101f,
- 0x00000000, 0x0e00111f, 0x00000000, 0x0a001010, 0x00402021, 0x0e001131,
- 0x00000000, 0x00402021, 0x36053000, 0x3c038000, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, 0xa6240010, 0x8f420144,
- 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00102b, 0x3c024000, 0x0000000d,
- 0x00000000, 0x24000295, 0x0a00102b, 0x3c024000, 0x0e0013a7, 0x00000000,
- 0x0a00102b, 0x3c024000, 0x0e001552, 0x00000000, 0x3c024000, 0xaf420178,
- 0x00000000, 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020,
- 0x24020800, 0x03e00008, 0xaf4201b8, 0x27bdffe8, 0x3c04600c, 0xafbf0014,
- 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, 0x3c106000, 0x00431024,
- 0x3442380c, 0x24030003, 0xac825000, 0x3c020008, 0xaf430008, 0x8e040808,
- 0x0342d825, 0x8e020808, 0x3c030800, 0xac600020, 0x3084fff0, 0x2c840001,
- 0x3042fff0, 0x38420010, 0x2c420001, 0xaf84000c, 0xaf820000, 0x0e001574,
- 0x00000000, 0x0e0014c7, 0x00000000, 0x3c020400, 0x3442000c, 0x3c03ffff,
- 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, 0x34420200, 0xae021980,
- 0x8f500000, 0x32020003, 0x1040fffd, 0x32020001, 0x10400004, 0x32020002,
- 0x0e000f7d, 0x00000000, 0x32020002, 0x1040fff6, 0x00000000, 0x0e000fcb,
- 0x00000000, 0x0a00105c, 0x00000000, 0x27bdffe8, 0x3c04600c, 0xafbf0014,
- 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, 0x3c106000, 0x00431024,
- 0x3442380c, 0x24030003, 0xac825000, 0x3c020008, 0xaf430008, 0x8e040808,
- 0x0342d825, 0x8e020808, 0x3c030800, 0xac600020, 0x3084fff0, 0x2c840001,
- 0x3042fff0, 0x38420010, 0x2c420001, 0xaf84000c, 0xaf820000, 0x0e001574,
- 0x00000000, 0x0e0014c7, 0x00000000, 0x3c020400, 0x3442000c, 0x3c03ffff,
- 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, 0x8fbf0014, 0x34420200,
- 0xae021980, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x30a5ffff, 0x30c6ffff,
- 0x30e7ffff, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003,
- 0xa342018b, 0x97830006, 0x8f82000c, 0xaf440180, 0xa745018c, 0xa746018e,
- 0x10400005, 0xa7430190, 0x9743011c, 0x9742011e, 0x0a0010ad, 0x00021400,
- 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f840010,
- 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021,
- 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff,
- 0x00821024, 0xaf820010, 0x97820012, 0x9743010c, 0x8f440104, 0x3042bfff,
- 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000,
- 0xaf4201b8, 0x03e00008, 0x00000000, 0x27440180, 0x3c038000, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x24022000, 0x24030002, 0xa4820008, 0xa083000b,
- 0xa4800010, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00000000, 0x27440180,
- 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420148,
- 0x24030002, 0xa083000b, 0x00021402, 0xa4820008, 0x8f430148, 0xa4830010,
- 0x8f420144, 0x3c031000, 0xac820024, 0x03e00008, 0xaf4301b8, 0x27bdffe0,
- 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420148, 0x24030002, 0x3044ffff,
- 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003, 0x10400005,
- 0x24020003, 0x0600001d, 0x36053000, 0x0a00110a, 0x3c038000, 0x12020007,
- 0x00000000, 0x0a001117, 0x00000000, 0x0e00111f, 0x00000000, 0x0a001108,
- 0x00402021, 0x0e001131, 0x00000000, 0x00402021, 0x36053000, 0x3c038000,
- 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b,
- 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00111b,
- 0x8fbf0018, 0x0000000d, 0x00000000, 0x24000295, 0x8fbf0018, 0x8fb10014,
- 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3084ffff, 0x2c821389, 0x1040000d,
- 0x00001021, 0x3c030800, 0x24635680, 0x00042942, 0x00052880, 0x00a32821,
- 0x3086001f, 0x8ca40000, 0x24030001, 0x00c31804, 0x00832025, 0x03e00008,
- 0xaca40000, 0x03e00008, 0x24020091, 0x3084ffff, 0x2c821389, 0x1040000e,
- 0x00001021, 0x3c030800, 0x24635680, 0x00042942, 0x00052880, 0x00a32821,
- 0x3086001f, 0x24030001, 0x8ca40000, 0x00c31804, 0x00031827, 0x00832024,
- 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x27bdffb0, 0xafbf0048,
- 0x93620023, 0x30420010, 0x1440025b, 0x24020001, 0x93420116, 0x93630005,
- 0x34424000, 0x30630001, 0x14600005, 0x03425821, 0x0e001548, 0x00000000,
- 0x0a0013a5, 0x8fbf0048, 0x93420112, 0x8f430104, 0x3c040020, 0x34424000,
- 0x00641824, 0x10600012, 0x03422821, 0x27450180, 0x3c038000, 0x8f4201b8,
+ 0xa4830010, 0x8f420144, 0x3c031000, 0xac820024, 0x03e00008, 0xaf4301b8,
+ 0x27bdffe0, 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420148, 0x24030002,
+ 0x3044ffff, 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003,
+ 0x10400005, 0x24020003, 0x0600001d, 0x36053000, 0x0a001117, 0x3c038000,
+ 0x12020007, 0x00000000, 0x0a001124, 0x00000000, 0x0e00112c, 0x00000000,
+ 0x0a001115, 0x00402021, 0x0e00113e, 0x00000000, 0x00402021, 0x36053000,
+ 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008,
+ 0xa222000b, 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8,
+ 0x0a001128, 0x8fbf0018, 0x0000000d, 0x00000000, 0x240002bf, 0x8fbf0018,
+ 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3084ffff, 0x2c821389,
+ 0x1040000d, 0x00001021, 0x3c030800, 0x24635900, 0x00042942, 0x00052880,
+ 0x00a32821, 0x3086001f, 0x8ca40000, 0x24030001, 0x00c31804, 0x00832025,
+ 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x3084ffff, 0x2c821389,
+ 0x1040000e, 0x00001021, 0x3c030800, 0x24635900, 0x00042942, 0x00052880,
+ 0x00a32821, 0x3086001f, 0x24030001, 0x8ca40000, 0x00c31804, 0x00031827,
+ 0x00832024, 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x9482000c,
+ 0x24870014, 0x00021302, 0x00021080, 0x00824021, 0x00e8182b, 0x1060004f,
+ 0x00000000, 0x90e30000, 0x2c620009, 0x10400047, 0x3c020800, 0x24425890,
+ 0x00031880, 0x00621821, 0x8c640000, 0x00800008, 0x00000000, 0x0a0011a4,
+ 0x24e70001, 0x90e30001, 0x2402000a, 0x54620024, 0x01003821, 0x01071023,
+ 0x2c42000a, 0x54400020, 0x01003821, 0x3c050800, 0x8ca26c98, 0x24e70002,
+ 0x34420100, 0xaca26c98, 0x90e30000, 0x90e20001, 0x90e40002, 0x90e60003,
+ 0x24e70004, 0x24a56c98, 0x00031e00, 0x00021400, 0x00621825, 0x00042200,
+ 0x00641825, 0x00661825, 0xaca30004, 0x90e20000, 0x90e30001, 0x90e40002,
+ 0x90e60003, 0x24e70004, 0x00021600, 0x00031c00, 0x00431025, 0x00042200,
+ 0x00441025, 0x00461025, 0x0a0011a4, 0xaca20008, 0x90e30001, 0x24020004,
+ 0x1062000e, 0x00601021, 0x0a00119e, 0x01001021, 0x90e30001, 0x24020003,
+ 0x10620008, 0x00601021, 0x0a00119e, 0x01001021, 0x90e30001, 0x24020002,
+ 0x14620003, 0x01001021, 0x00601021, 0x00e21021, 0x0a0011a4, 0x00403821,
+ 0x90e20001, 0x0a0011a4, 0x00e23821, 0x01003821, 0x00e8102b, 0x5440ffb4,
+ 0x90e30000, 0x03e00008, 0x24020001, 0x27bdff90, 0x3c030800, 0xafbf006c,
+ 0xafbe0068, 0xafb70064, 0xafb60060, 0xafb5005c, 0xafb40058, 0xafb30054,
+ 0xafb20050, 0xafb1004c, 0xafb00048, 0xac606c98, 0x93620023, 0x30420010,
+ 0x1440027c, 0x24020001, 0x93420116, 0x93630005, 0x34424000, 0x30630001,
+ 0x14600005, 0x0342b021, 0x0e0015e0, 0x00000000, 0x0a001436, 0x8fbf006c,
+ 0x93420112, 0x8f430104, 0x3c040020, 0x34424000, 0x00641824, 0x10600012,
+ 0x03422821, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x8f420128, 0xaca20000, 0x8f640040, 0x24030008, 0x240240c1,
+ 0xa4a20008, 0x24020002, 0xa0a2000b, 0x3c021000, 0x0a0011f1, 0xa0a3000a,
+ 0x8f420104, 0x3c030040, 0x00431024, 0x1040001d, 0x3c038000, 0x27450180,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000,
+ 0x8f640040, 0x24030010, 0x240240c1, 0xa4a20008, 0x24020002, 0xa0a3000a,
+ 0x24030008, 0xa0a2000b, 0x3c021000, 0xa4a30010, 0xa0a00012, 0xa0a00013,
+ 0xaca00014, 0xaca00024, 0xaca00028, 0xaca0002c, 0xaca40018, 0x0e0015e0,
+ 0xaf4201b8, 0x0a001436, 0x8fbf006c, 0x8f820000, 0x10400016, 0x00000000,
+ 0x8f420104, 0x3c030001, 0x00431024, 0x10400011, 0x00000000, 0x8ca3000c,
+ 0x8f620030, 0x1462022d, 0x24020001, 0x8ca30010, 0x8f62002c, 0x14620229,
+ 0x24020001, 0x9763003a, 0x96c20000, 0x14430225, 0x24020001, 0x97630038,
+ 0x96c20002, 0x14430221, 0x24020001, 0xaf400048, 0xaf400054, 0xaf400040,
+ 0x8f740040, 0x8f650048, 0x00b43023, 0x04c10004, 0x00000000, 0x0000000d,
+ 0x00000000, 0x240001af, 0x9742011a, 0x3052ffff, 0x12400004, 0x8ed30004,
+ 0x02721021, 0x0a001228, 0x2451ffff, 0x02608821, 0x92d7000d, 0xa7a00020,
+ 0xa3a0001a, 0xafa00028, 0x9362003f, 0x32e30004, 0x1060003a, 0x305000ff,
+ 0x24040012, 0x16040006, 0x24020001, 0x3c040800, 0x8c830028, 0x24630001,
+ 0x0a001328, 0xac830028, 0x8f620044, 0x16620010, 0x27a60010, 0x27450180,
+ 0x3c038000, 0x2402001a, 0xa7a20020, 0x24020020, 0xafb40028, 0xa3b00022,
+ 0xa3a40023, 0xa3a2001a, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000,
+ 0x0a00130d, 0x00000000, 0x8f620044, 0x02621023, 0x0440001a, 0x02651023,
+ 0x044100d9, 0x24020001, 0x3c020800, 0x8c4300d8, 0x10600004, 0x24020001,
+ 0xa7a20020, 0x0a00125e, 0xafb40028, 0x2402001a, 0xa7a20020, 0x24020020,
+ 0xafb40028, 0xa3b00022, 0xa3a40023, 0xa3a2001a, 0x27a60010, 0x27450180,
+ 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a00130d,
+ 0x00000000, 0x0a001328, 0x24020001, 0x0293f023, 0x1bc00016, 0x025e102a,
+ 0x54400007, 0x32f700fe, 0x57d2000f, 0x027e9821, 0x32e20001, 0x5440000c,
+ 0x027e9821, 0x32f700fe, 0x0240f021, 0x3c040800, 0x8c8300c8, 0x00009021,
+ 0x24020001, 0xa7a20020, 0xafb40028, 0x24630001, 0x0a001282, 0xac8300c8,
+ 0x025e1023, 0x0a001282, 0x3052ffff, 0x0000f021, 0x24a2ffff, 0x02221823,
+ 0x1860001f, 0x0072102a, 0x54400019, 0x00a08821, 0x97a20020, 0x3c040800,
+ 0x8c8300cc, 0xafb40028, 0x34420001, 0x24630001, 0xa7a20020, 0x02741026,
+ 0x2c420001, 0xac8300cc, 0x2cc30001, 0x00431024, 0x1440000a, 0x02401821,
+ 0x27a60010, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x0a00130d, 0x00000000, 0x00a08821, 0x02431023, 0x3052ffff,
+ 0x0a0012ae, 0x32f700f6, 0x02741023, 0x18400008, 0x97a20020, 0x3c040800,
+ 0x8c8300d4, 0xafb30028, 0x34420400, 0x24630001, 0xa7a20020, 0xac8300d4,
+ 0x32e20002, 0x1040001c, 0x32e20010, 0x8f620044, 0x1662000d, 0x27a60010,
+ 0x97a20020, 0x27450180, 0x3c038000, 0xafb40028, 0x34420001, 0xa7a20020,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a00130d, 0x00000000,
+ 0x97a20020, 0x27450180, 0x3c038000, 0xafb40028, 0x34420001, 0xa7a20020,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a00130d, 0x00000000,
+ 0x54400003, 0x8ed50008, 0x0a001328, 0x24020001, 0x8f630054, 0x26a2ffff,
+ 0x00431023, 0x18400011, 0x27a60010, 0x97a20020, 0x3c040800, 0x8c8300d0,
+ 0x27450180, 0x3c078000, 0xafb40028, 0x34420001, 0x24630001, 0xa7a20020,
+ 0xac8300d0, 0x8f4201b8, 0x00471024, 0x1440fffd, 0x00000000, 0x0a00130d,
+ 0x00000000, 0x32e20020, 0x10400011, 0x00000000, 0x96c20012, 0x0052102b,
+ 0x10400008, 0x97a20020, 0x96d20012, 0x12400003, 0x02721021, 0x0a0012f2,
+ 0x2451ffff, 0x02608821, 0x97a20020, 0x93a3001a, 0x34420008, 0x34630004,
+ 0xa7a20020, 0xa3a3001a, 0x8f420104, 0x3c030080, 0x00431024, 0x10400037,
+ 0x3a03000a, 0x0e001151, 0x02c02021, 0x24030002, 0x1443002b, 0x3c030800,
+ 0x27a60010, 0x97a20020, 0x27450180, 0x3c038000, 0xafb40028, 0x34420001,
+ 0xa7a20020, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128,
+ 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018, 0x90c4000a,
+ 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010, 0x90c30012,
+ 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014, 0x8cc20024,
+ 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc4002c, 0x24020001, 0x3c031000,
+ 0xaca4002c, 0xaf4301b8, 0xaf400044, 0xaf400050, 0x0a001436, 0x8fbf006c,
+ 0x8c626c98, 0x30420100, 0x10400003, 0x24636c98, 0x8c620004, 0xaf62017c,
+ 0x3a03000a, 0x2c630001, 0x3a02000c, 0x2c420001, 0x00621825, 0x14600003,
+ 0x2402000e, 0x56020030, 0x00009021, 0x52400008, 0x96c4000e, 0x12400004,
+ 0xa7b20040, 0x02721021, 0x0a001343, 0x2451ffff, 0x02608821, 0x96c4000e,
+ 0x93630035, 0x8f62004c, 0x00642004, 0x00952021, 0x00821023, 0x18400015,
+ 0x00000000, 0x8f620018, 0x02621023, 0x1c400015, 0x97a20020, 0x8f620018,
+ 0x1662001c, 0x00000000, 0x8f62001c, 0x02a21023, 0x1c40000e, 0x97a20020,
+ 0x8f62001c, 0x16a20015, 0x00000000, 0x8f620058, 0x00821023, 0x18400011,
+ 0x97a20020, 0x0a001364, 0xafb10028, 0x8f620058, 0x00821023, 0x0441000b,
+ 0x97a20020, 0xafb10028, 0xafb30034, 0xafb50038, 0xafa4003c, 0x34420020,
+ 0x0a00136d, 0xa7a20020, 0x02809821, 0x02608821, 0x8f640058, 0x8f62004c,
+ 0x02a21023, 0x18400009, 0x00000000, 0x8f620054, 0x02a21023, 0x1c400005,
+ 0x97a20020, 0xafb10028, 0xafb50024, 0x0a001385, 0x34420040, 0x9742011a,
+ 0x1440000c, 0x24020014, 0x8f620058, 0x14820009, 0x24020014, 0x8f63004c,
+ 0x8f620054, 0x10620004, 0x97a20020, 0xafb10028, 0x34420080, 0xa7a20020,
+ 0x24020014, 0x1202000a, 0x2a020015, 0x10400005, 0x2402000c, 0x12020006,
+ 0x32e20001, 0x0a0013c6, 0x00000000, 0x24020016, 0x16020035, 0x32e20001,
+ 0x8f620084, 0x24420001, 0x16a20031, 0x32e20001, 0x24020014, 0x12020021,
+ 0x2a020015, 0x10400005, 0x2402000c, 0x12020008, 0x32e20001, 0x0a0013c6,
+ 0x00000000, 0x24020016, 0x1202000c, 0x32e20001, 0x0a0013c6, 0x00000000,
+ 0x97a30020, 0x2402000e, 0xafb10028, 0xa3b00022, 0xa3a20023, 0xafb50024,
+ 0x34630054, 0x0a0013c5, 0xa7a30020, 0x97a20020, 0x93a4001a, 0x24030010,
+ 0xafb10028, 0xa3b00022, 0xa3a30023, 0xafb50024, 0x3442005d, 0x34840002,
+ 0xa7a20020, 0x0a0013c5, 0xa3a4001a, 0x97a20020, 0x24030012, 0xa3a30023,
+ 0x93a3001a, 0xafb10028, 0xa3b00022, 0xafb50024, 0x3042fffe, 0x3442005c,
+ 0x34630002, 0xa7a20020, 0xa3a3001a, 0x32e20001, 0x10400030, 0x2402000c,
+ 0x12020013, 0x2a02000d, 0x10400005, 0x2402000a, 0x12020008, 0x97a20020,
+ 0x0a0013f8, 0x32e20009, 0x2402000e, 0x1202001b, 0x32e20009, 0x0a0013f9,
+ 0x0002102b, 0x93a4001a, 0x24030008, 0xafb10028, 0xa3b00022, 0xa3a30023,
+ 0x0a0013f4, 0x34420013, 0x97a30020, 0x30620004, 0x14400005, 0x93a2001a,
+ 0x3463001b, 0xa7a30020, 0x0a0013e7, 0x24030016, 0x3463001b, 0xa7a30020,
+ 0x24030010, 0xafb10028, 0xa3b00022, 0xa3a30023, 0x34420002, 0x0a0013f7,
+ 0xa3a2001a, 0x97a20020, 0x93a4001a, 0x24030010, 0xafb10028, 0xa3b00022,
+ 0xa3a30023, 0x3442001b, 0x34840002, 0xa7a20020, 0xa3a4001a, 0x32e20009,
+ 0x0002102b, 0x00021023, 0x30420007, 0x12400015, 0x34450003, 0x8f820018,
+ 0x24030800, 0x27440180, 0x24420001, 0xaf820018, 0x24020004, 0xaf4301b8,
+ 0xa4850008, 0xa082000b, 0x93430120, 0x00003021, 0x3c021000, 0xa492000e,
+ 0xac950024, 0xac930028, 0x007e1821, 0xa483000c, 0xaf4201b8, 0x0a001413,
+ 0x97a20020, 0x24060001, 0x97a20020, 0x10400020, 0x27450180, 0x3c038000,
+ 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000,
+ 0x8fa30028, 0x240240c1, 0xa4a20008, 0xaca30018, 0x93a4001a, 0x24020002,
+ 0xa0a2000b, 0xa0a4000a, 0x97a20020, 0xa4a20010, 0x93a30022, 0xa0a30012,
+ 0x93a20023, 0xa0a20013, 0x8fa30024, 0xaca30014, 0x8fa20034, 0xaca20024,
+ 0x8fa30038, 0xaca30028, 0x8fa2003c, 0x3c031000, 0xaca2002c, 0xaf4301b8,
+ 0x00c01021, 0x8fbf006c, 0x8fbe0068, 0x8fb70064, 0x8fb60060, 0x8fb5005c,
+ 0x8fb40058, 0x8fb30054, 0x8fb20050, 0x8fb1004c, 0x8fb00048, 0x03e00008,
+ 0x27bd0070, 0x8f470140, 0x8f460148, 0x3c028000, 0x00c24024, 0x00062c02,
+ 0x30a300ff, 0x24020019, 0x106200e7, 0x27440180, 0x2862001a, 0x1040001f,
+ 0x24020008, 0x106200be, 0x28620009, 0x1040000d, 0x24020001, 0x10620046,
+ 0x28620002, 0x50400005, 0x24020006, 0x1060002e, 0x00a01821, 0x0a00155e,
+ 0x00000000, 0x1062005b, 0x00a01821, 0x0a00155e, 0x00000000, 0x2402000b,
+ 0x10620084, 0x2862000c, 0x10400005, 0x24020009, 0x106200bc, 0x00061c02,
+ 0x0a00155e, 0x00000000, 0x2402000e, 0x106200b7, 0x00061c02, 0x0a00155e,
+ 0x00000000, 0x28620021, 0x10400009, 0x2862001f, 0x104000c1, 0x2402001b,
+ 0x106200bf, 0x2402001c, 0x1062009a, 0x00061c02, 0x0a00155e, 0x00000000,
+ 0x240200c2, 0x106200ca, 0x286200c3, 0x10400005, 0x24020080, 0x1062005a,
+ 0x00a01821, 0x0a00155e, 0x00000000, 0x240200c9, 0x106200cd, 0x30c5ffff,
+ 0x0a00155e, 0x00000000, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd,
+ 0x24020001, 0xa4830008, 0x24030002, 0xac870000, 0xac800004, 0xa082000a,
+ 0xa083000b, 0xa4860010, 0x8f430144, 0x3c021000, 0xac800028, 0xac830024,
+ 0x3c036000, 0xaf4201b8, 0x03e00008, 0xac600808, 0x11000009, 0x00a01821,
+ 0x3c020800, 0x24030002, 0xa0436c88, 0x24426c88, 0xac470008, 0x8f430144,
+ 0x03e00008, 0xac430004, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd,
+ 0x24020002, 0xac800000, 0xac870004, 0xa4830008, 0xa082000a, 0xa082000b,
+ 0xa4860010, 0xac800024, 0x8f420144, 0x3c031000, 0xac820028, 0x3c026000,
+ 0xaf4301b8, 0x03e00008, 0xac400808, 0x3c080800, 0x3c058000, 0x8f4201b8,
+ 0x00451024, 0x1440fffd, 0x00000000, 0xac870000, 0x91026c88, 0x00002821,
+ 0x10400002, 0x25076c88, 0x8ce50008, 0xac850004, 0xa4830008, 0x91036c88,
+ 0x24020002, 0xa082000b, 0xa4860010, 0x34630001, 0xa083000a, 0x8f420144,
+ 0xac820024, 0x91036c88, 0x10600002, 0x00001021, 0x8ce20004, 0xac820028,
+ 0x3c021000, 0xaf4201b8, 0x3c026000, 0xa1006c88, 0x03e00008, 0xac400808,
+ 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xa082000b,
+ 0xa4830008, 0xa4860010, 0x8f420144, 0x3c031000, 0xa4820012, 0x03e00008,
+ 0xaf4301b8, 0x30c2ffff, 0x14400028, 0x00061c02, 0x93620005, 0x30420004,
+ 0x14400020, 0x3c029000, 0x34420001, 0x00e21025, 0xaf420020, 0x3c038000,
+ 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000,
+ 0x34630001, 0x00e31825, 0x34420004, 0xa3620005, 0xaf430020, 0x93620005,
+ 0x30420004, 0x14400003, 0x3c038000, 0x0000000d, 0x3c038000, 0x8f4201b8,
+ 0x00431024, 0x1440fffd, 0x24020005, 0x3c031000, 0xac870000, 0xa082000b,
+ 0xaf4301b8, 0x0a00150d, 0x00061c02, 0x0000000d, 0x03e00008, 0x00000000,
+ 0x00061c02, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001,
+ 0xa4830008, 0x24030002, 0xac870000, 0xac800004, 0xa082000a, 0xa083000b,
+ 0xa4860010, 0x8f430144, 0x3c021000, 0xac800028, 0xac830024, 0x03e00008,
+ 0xaf4201b8, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002,
+ 0xac800000, 0xac870004, 0xa4830008, 0xa082000a, 0xa082000b, 0xa4860010,
+ 0xac800024, 0x8f420144, 0x3c031000, 0xac820028, 0x03e00008, 0xaf4301b8,
+ 0x00061c02, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001,
+ 0xa4830008, 0x24030002, 0xa082000a, 0x3c021000, 0xac870000, 0xac800004,
+ 0xa083000b, 0xa4860010, 0xac800024, 0xac800028, 0x03e00008, 0xaf4201b8,
+ 0x00a01821, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002,
+ 0xac870000, 0xac800004, 0xa4830008, 0xa080000a, 0x0a001518, 0xa082000b,
+ 0x8f440144, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002,
+ 0x240340c9, 0xaf470180, 0xa342018b, 0x3c021000, 0xa7430188, 0xaf4401a4,
+ 0xaf4501a8, 0xaf4001ac, 0x03e00008, 0xaf4201b8, 0x0000000d, 0x03e00008,
+ 0x00000000, 0x03e00008, 0x00000000, 0x8f420100, 0x3042003e, 0x14400011,
+ 0x24020001, 0xaf400048, 0x8f420100, 0x304207c0, 0x10400005, 0x00000000,
+ 0xaf40004c, 0xaf400050, 0x03e00008, 0x24020001, 0xaf400054, 0xaf400040,
+ 0x8f420100, 0x30423800, 0x54400001, 0xaf400044, 0x24020001, 0x03e00008,
+ 0x00000000, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002,
+ 0x240340c9, 0xaf440180, 0xa342018b, 0x3c021000, 0xa7430188, 0xaf4501a4,
+ 0xaf4601a8, 0xaf4701ac, 0x03e00008, 0xaf4201b8, 0x3c029000, 0x34420001,
+ 0x00822025, 0xaf440020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd,
+ 0x00000000, 0x03e00008, 0x00000000, 0x3c028000, 0x34420001, 0x00822025,
+ 0x03e00008, 0xaf440020, 0x308600ff, 0x27450180, 0x3c038000, 0x8f4201b8,
0x00431024, 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000, 0x8f640040,
0x24030008, 0x240240c1, 0xa4a20008, 0x24020002, 0xa0a2000b, 0x3c021000,
- 0x0a001181, 0xa0a3000a, 0x8f420104, 0x3c030040, 0x00431024, 0x1040001d,
- 0x3c038000, 0x27450180, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000,
- 0x8f420128, 0xaca20000, 0x8f640040, 0x24030010, 0x240240c1, 0xa4a20008,
- 0x24020002, 0xa0a3000a, 0x24030008, 0xa0a2000b, 0x3c021000, 0xa4a30010,
- 0xa0a00012, 0xa0a00013, 0xaca00014, 0xaca00024, 0xaca00028, 0xaca0002c,
- 0xaca40018, 0x0e001548, 0xaf4201b8, 0x0a0013a5, 0x8fbf0048, 0x8f820000,
- 0x10400016, 0x00000000, 0x8f420104, 0x3c030001, 0x00431024, 0x10400011,
- 0x00000000, 0x8ca3000c, 0x8f620030, 0x1462020c, 0x24020001, 0x8ca30010,
- 0x8f62002c, 0x14620208, 0x24020001, 0x9763003a, 0x95620000, 0x14430204,
- 0x24020001, 0x97630038, 0x95620002, 0x14430200, 0x24020001, 0xaf400048,
- 0xaf400054, 0xaf400040, 0x8f690040, 0x8f6a0048, 0x01497023, 0x05c10004,
- 0x00000000, 0x0000000d, 0x00000000, 0x24000169, 0x9742011a, 0x3046ffff,
- 0x10c00004, 0x8d680004, 0x01061021, 0x0a0011b8, 0x2445ffff, 0x01002821,
- 0x916c000d, 0xa7a00020, 0xa3a0001a, 0xafa00028, 0x9362003f, 0x31830004,
- 0x1060003a, 0x304700ff, 0x24040012, 0x14e40006, 0x24020001, 0x3c040800,
- 0x8c830028, 0x24630001, 0x0a00128d, 0xac830028, 0x8f620044, 0x15020010,
- 0x27a60010, 0x27450180, 0x3c038000, 0x2402001a, 0xa7a20020, 0x24020020,
- 0xafa90028, 0xa3a70022, 0xa3a40023, 0xa3a2001a, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x00000000, 0x0a001272, 0x00000000, 0x8f620044, 0x01021023,
- 0x0440001a, 0x010a1023, 0x044100ae, 0x24020001, 0x3c020800, 0x8c4300d8,
- 0x10600004, 0x24020001, 0xa7a20020, 0x0a0011ee, 0xafa90028, 0x2402001a,
- 0xa7a20020, 0x24020020, 0xafa90028, 0xa3a70022, 0xa3a40023, 0xa3a2001a,
- 0x27a60010, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd,
- 0x00000000, 0x0a001272, 0x00000000, 0x0a00128d, 0x24020001, 0x01286823,
- 0x19a00016, 0x00cd102a, 0x54400007, 0x318c00fe, 0x55a6000f, 0x010d4021,
- 0x31820001, 0x5440000c, 0x010d4021, 0x318c00fe, 0x00c06821, 0x3c040800,
- 0x8c8300c8, 0x00003021, 0x24020001, 0xa7a20020, 0xafa90028, 0x24630001,
- 0x0a001212, 0xac8300c8, 0x00cd1023, 0x0a001212, 0x3046ffff, 0x00006821,
- 0x2542ffff, 0x00a21823, 0x1860001e, 0x0066102a, 0x14400018, 0x01402821,
- 0x97a20020, 0x3c040800, 0x8c8300cc, 0xafa90028, 0x34420001, 0x24630001,
- 0xa7a20020, 0x01091026, 0x2c420001, 0xac8300cc, 0x2dc30001, 0x00431024,
- 0x1440000a, 0x00c01821, 0x27a60010, 0x27450180, 0x3c038000, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x00000000, 0x0a001272, 0x00000000, 0x00c31023,
- 0x3046ffff, 0x0a00123d, 0x318c00f6, 0x01091023, 0x18400008, 0x97a20020,
- 0x3c040800, 0x8c8300d4, 0xafa80028, 0x34420400, 0x24630001, 0xa7a20020,
- 0xac8300d4, 0x31820002, 0x1040001c, 0x31820010, 0x8f620044, 0x1502000d,
- 0x27a60010, 0x97a20020, 0x27450180, 0x3c038000, 0xafa90028, 0x34420001,
- 0xa7a20020, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a001272,
- 0x00000000, 0x97a20020, 0x27450180, 0x3c038000, 0xafa90028, 0x34420001,
- 0xa7a20020, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x0a001272,
- 0x00000000, 0x54400003, 0x8d6a0008, 0x0a00128d, 0x24020001, 0x8f630054,
- 0x2542ffff, 0x00431023, 0x1840002e, 0x97a20020, 0x27a60010, 0x3c040800,
- 0x8c8300d0, 0x27450180, 0x3c078000, 0xafa90028, 0x34420001, 0x24630001,
- 0xa7a20020, 0xac8300d0, 0x8f4201b8, 0x00471024, 0x1440fffd, 0x00000000,
- 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018,
- 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010,
- 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014,
- 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc4002c, 0x24020001,
- 0x3c031000, 0xaca4002c, 0xaf4301b8, 0xaf400044, 0xaf400050, 0x0a0013a5,
- 0x8fbf0048, 0x31820020, 0x10400011, 0x00000000, 0x95620012, 0x0046102b,
- 0x10400008, 0x97a20020, 0x95660012, 0x10c00003, 0x01061021, 0x0a00129e,
- 0x2445ffff, 0x01002821, 0x97a20020, 0x93a3001a, 0x34420008, 0x34630004,
- 0xa7a20020, 0xa3a3001a, 0x8f420104, 0x38e3000a, 0x2c630001, 0x38e2000c,
- 0x2c420001, 0x00621825, 0x14600003, 0x2402000e, 0x54e2002a, 0x00003021,
- 0x50c00008, 0x9564000e, 0x10c00004, 0xa7a60040, 0x01061021, 0x0a0012b6,
- 0x2445ffff, 0x01002821, 0x9564000e, 0x93630035, 0x8f62004c, 0x00642004,
- 0x008a2021, 0x00821023, 0x1840001d, 0x00000000, 0x8f620018, 0x01021023,
- 0x1c40000f, 0x97a20020, 0x8f620018, 0x15020016, 0x00000000, 0x8f62001c,
- 0x01421023, 0x1c400008, 0x97a20020, 0x8f62001c, 0x1542000f, 0x00000000,
- 0x8f620058, 0x00821023, 0x1840000b, 0x97a20020, 0xafa50028, 0xafa80034,
- 0xafaa0038, 0xafa4003c, 0x34420020, 0x0a0012da, 0xa7a20020, 0x01204021,
- 0x01002821, 0x8f640058, 0x8f62004c, 0x01421023, 0x18400009, 0x00000000,
- 0x8f620054, 0x01421023, 0x1c400005, 0x97a20020, 0xafa50028, 0xafaa0024,
- 0x0a0012f2, 0x34420040, 0x9742011a, 0x1440000c, 0x24020014, 0x8f620058,
- 0x14820009, 0x24020014, 0x8f63004c, 0x8f620054, 0x10620004, 0x97a20020,
- 0xafa50028, 0x34420080, 0xa7a20020, 0x24020014, 0x10e2000a, 0x28e20015,
- 0x10400005, 0x2402000c, 0x10e20006, 0x31820001, 0x0a001333, 0x00000000,
- 0x24020016, 0x14e20035, 0x31820001, 0x8f620084, 0x24420001, 0x15420031,
- 0x31820001, 0x24020014, 0x10e20021, 0x28e20015, 0x10400005, 0x2402000c,
- 0x10e20008, 0x31820001, 0x0a001333, 0x00000000, 0x24020016, 0x10e2000c,
- 0x31820001, 0x0a001333, 0x00000000, 0x97a30020, 0x2402000e, 0xafa50028,
- 0xa3a70022, 0xa3a20023, 0xafaa0024, 0x34630054, 0x0a001332, 0xa7a30020,
- 0x97a20020, 0x93a4001a, 0x24030010, 0xafa50028, 0xa3a70022, 0xa3a30023,
- 0xafaa0024, 0x3442005d, 0x34840002, 0xa7a20020, 0x0a001332, 0xa3a4001a,
- 0x97a20020, 0x24030012, 0xa3a30023, 0x93a3001a, 0xafa50028, 0xa3a70022,
- 0xafaa0024, 0x3042fffe, 0x3442005c, 0x34630002, 0xa7a20020, 0xa3a3001a,
- 0x31820001, 0x10400030, 0x2402000c, 0x10e20013, 0x28e2000d, 0x10400005,
- 0x2402000a, 0x10e20008, 0x97a20020, 0x0a001365, 0x31820009, 0x2402000e,
- 0x10e2001b, 0x31820009, 0x0a001366, 0x0002102b, 0x93a4001a, 0x24030008,
- 0xafa50028, 0xa3a70022, 0xa3a30023, 0x0a001361, 0x34420013, 0x97a30020,
- 0x30620004, 0x14400005, 0x93a2001a, 0x3463001b, 0xa7a30020, 0x0a001354,
- 0x24030016, 0x3463001b, 0xa7a30020, 0x24030010, 0xafa50028, 0xa3a70022,
- 0xa3a30023, 0x34420002, 0x0a001364, 0xa3a2001a, 0x97a20020, 0x93a4001a,
- 0x24030010, 0xafa50028, 0xa3a70022, 0xa3a30023, 0x3442001b, 0x34840002,
- 0xa7a20020, 0xa3a4001a, 0x31820009, 0x0002102b, 0x00021023, 0x30420007,
- 0x10c00017, 0x34440003, 0x8f820014, 0x24030800, 0x27450180, 0x24420001,
- 0xaf820014, 0x24020004, 0xaf4301b8, 0xa4a40008, 0xa0a2000b, 0x93440120,
- 0x3c031000, 0xa4a6000e, 0xacaa0024, 0xaca80028, 0x008d2021, 0xa4a4000c,
- 0xaf4301b8, 0x97a20020, 0x00003021, 0x3042ffbf, 0x0a001381, 0xa7a20020,
- 0x24060001, 0x97a20020, 0x10400020, 0x27450180, 0x3c038000, 0x8f4201b8,
- 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000, 0x8fa30028,
- 0x240240c1, 0xa4a20008, 0xaca30018, 0x93a4001a, 0x24020002, 0xa0a2000b,
- 0xa0a4000a, 0x97a20020, 0xa4a20010, 0x93a30022, 0xa0a30012, 0x93a20023,
- 0xa0a20013, 0x8fa30024, 0xaca30014, 0x8fa20034, 0xaca20024, 0x8fa30038,
- 0xaca30028, 0x8fa2003c, 0x3c031000, 0xaca2002c, 0xaf4301b8, 0x00c01021,
- 0x8fbf0048, 0x03e00008, 0x27bd0050, 0x8f470140, 0x8f460148, 0x3c028000,
- 0x00c24024, 0x00062c02, 0x30a300ff, 0x24020019, 0x106200e7, 0x27440180,
- 0x2862001a, 0x1040001f, 0x24020008, 0x106200be, 0x28620009, 0x1040000d,
- 0x24020001, 0x10620046, 0x28620002, 0x50400005, 0x24020006, 0x1060002e,
- 0x00a01821, 0x0a0014c4, 0x00000000, 0x1062005b, 0x00a01821, 0x0a0014c4,
- 0x00000000, 0x2402000b, 0x10620084, 0x2862000c, 0x10400005, 0x24020009,
- 0x106200bc, 0x00061c02, 0x0a0014c4, 0x00000000, 0x2402000e, 0x106200b7,
- 0x00061c02, 0x0a0014c4, 0x00000000, 0x28620021, 0x10400009, 0x2862001f,
- 0x104000c1, 0x2402001b, 0x106200bf, 0x2402001c, 0x1062009a, 0x00061c02,
- 0x0a0014c4, 0x00000000, 0x240200c2, 0x106200ca, 0x286200c3, 0x10400005,
- 0x24020080, 0x1062005a, 0x00a01821, 0x0a0014c4, 0x00000000, 0x240200c9,
- 0x106200cd, 0x30c5ffff, 0x0a0014c4, 0x00000000, 0x3c058000, 0x8f4201b8,
- 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xac870000,
- 0xac800004, 0xa082000a, 0xa083000b, 0xa4860010, 0x8f430144, 0x3c021000,
- 0xac800028, 0xac830024, 0x3c036000, 0xaf4201b8, 0x03e00008, 0xac600808,
- 0x11000009, 0x00a01821, 0x3c020800, 0x24030002, 0xa0436a08, 0x24426a08,
- 0xac470008, 0x8f430144, 0x03e00008, 0xac430004, 0x3c058000, 0x8f4201b8,
- 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, 0xac870004, 0xa4830008,
- 0xa082000a, 0xa082000b, 0xa4860010, 0xac800024, 0x8f420144, 0x3c031000,
- 0xac820028, 0x3c026000, 0xaf4301b8, 0x03e00008, 0xac400808, 0x3c080800,
- 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x00000000, 0xac870000,
- 0x91026a08, 0x00002821, 0x10400002, 0x25076a08, 0x8ce50008, 0xac850004,
- 0xa4830008, 0x91036a08, 0x24020002, 0xa082000b, 0xa4860010, 0x34630001,
- 0xa083000a, 0x8f420144, 0xac820024, 0x91036a08, 0x10600002, 0x00001021,
- 0x8ce20004, 0xac820028, 0x3c021000, 0xaf4201b8, 0x3c026000, 0xa1006a08,
- 0x03e00008, 0xac400808, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd,
- 0x24020002, 0xa082000b, 0xa4830008, 0xa4860010, 0x8f420144, 0x3c031000,
- 0xa4820012, 0x03e00008, 0xaf4301b8, 0x30c2ffff, 0x14400028, 0x00061c02,
- 0x93620005, 0x30420004, 0x14400020, 0x3c029000, 0x34420001, 0x00e21025,
- 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000,
- 0x93620005, 0x3c038000, 0x34630001, 0x00e31825, 0x34420004, 0xa3620005,
- 0xaf430020, 0x93620005, 0x30420004, 0x14400003, 0x3c038000, 0x0000000d,
- 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020005, 0x3c031000,
- 0xac870000, 0xa082000b, 0xaf4301b8, 0x0a001473, 0x00061c02, 0x0000000d,
- 0x03e00008, 0x00000000, 0x00061c02, 0x3c058000, 0x8f4201b8, 0x00451024,
- 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xac870000, 0xac800004,
- 0xa082000a, 0xa083000b, 0xa4860010, 0x8f430144, 0x3c021000, 0xac800028,
- 0xac830024, 0x03e00008, 0xaf4201b8, 0x3c058000, 0x8f4201b8, 0x00451024,
- 0x1440fffd, 0x24020002, 0xac800000, 0xac870004, 0xa4830008, 0xa082000a,
- 0xa082000b, 0xa4860010, 0xac800024, 0x8f420144, 0x3c031000, 0xac820028,
- 0x03e00008, 0xaf4301b8, 0x00061c02, 0x3c058000, 0x8f4201b8, 0x00451024,
- 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xa082000a, 0x3c021000,
- 0xac870000, 0xac800004, 0xa083000b, 0xa4860010, 0xac800024, 0xac800028,
- 0x03e00008, 0xaf4201b8, 0x00a01821, 0x3c058000, 0x8f4201b8, 0x00451024,
- 0x1440fffd, 0x24020002, 0xac870000, 0xac800004, 0xa4830008, 0xa080000a,
- 0x0a00147e, 0xa082000b, 0x8f440144, 0x3c038000, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x24020002, 0x240340c9, 0xaf470180, 0xa342018b, 0x3c021000,
- 0xa7430188, 0xaf4401a4, 0xaf4501a8, 0xaf4001ac, 0x03e00008, 0xaf4201b8,
- 0x0000000d, 0x03e00008, 0x00000000, 0x03e00008, 0x00000000, 0x8f420100,
- 0x3042003e, 0x14400011, 0x24020001, 0xaf400048, 0x8f420100, 0x304207c0,
- 0x10400005, 0x00000000, 0xaf40004c, 0xaf400050, 0x03e00008, 0x24020001,
- 0xaf400054, 0xaf400040, 0x8f420100, 0x30423800, 0x54400001, 0xaf400044,
- 0x24020001, 0x03e00008, 0x00000000, 0x3c038000, 0x8f4201b8, 0x00431024,
- 0x1440fffd, 0x24020002, 0x240340c9, 0xaf440180, 0xa342018b, 0x3c021000,
- 0xa7430188, 0xaf4501a4, 0xaf4601a8, 0xaf4701ac, 0x03e00008, 0xaf4201b8,
- 0x3c029000, 0x34420001, 0x00822025, 0xaf440020, 0x3c038000, 0x8f420020,
- 0x00431024, 0x1440fffd, 0x00000000, 0x03e00008, 0x00000000, 0x3c028000,
- 0x34420001, 0x00822025, 0x03e00008, 0xaf440020, 0x308600ff, 0x27450180,
- 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000, 0x8f420128,
- 0xaca20000, 0x8f640040, 0x24030008, 0x240240c1, 0xa4a20008, 0x24020002,
- 0xa0a2000b, 0x3c021000, 0xa0a6000a, 0xa4a30010, 0xa0a00012, 0xa0a00013,
- 0xaca00014, 0xaca00024, 0xaca00028, 0xaca0002c, 0xaca40018, 0x03e00008,
- 0xaf4201b8, 0x24020001, 0xacc40000, 0x03e00008, 0xa4e50000, 0x03e00008,
- 0x24020001, 0x24020001, 0xaf400044, 0x03e00008, 0xaf400050, 0x00803021,
- 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x00000000,
- 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018,
- 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010,
- 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014,
- 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc2002c, 0x3c031000,
- 0xaca2002c, 0x24020001, 0xaf4301b8, 0xaf400044, 0x03e00008, 0xaf400050,
- 0x27bdffe8, 0xafbf0010, 0x0e001032, 0x00000000, 0x00002021, 0x0e000c99,
- 0xaf400180, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f460148, 0x27450180,
- 0x3c038000, 0x00061402, 0x304700ff, 0x8f4201b8, 0x00431024, 0x1440fffd,
- 0x00000000, 0x8f440140, 0x00061202, 0x304200ff, 0x00061c02, 0xaca20004,
- 0x24020002, 0xa4a30008, 0x30c300ff, 0xa0a2000b, 0xaca30024, 0x10e0000a,
- 0xaca40000, 0x28e20004, 0x14400005, 0x24020001, 0x24020005, 0x54e20005,
- 0xa0a0000a, 0x24020001, 0x0a001571, 0xa0a2000a, 0xa0a0000a, 0x3c021000,
- 0x03e00008, 0xaf4201b8, 0x03e00008, 0x00001021, 0x10c00007, 0x00000000,
- 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, 0x14c0fffb, 0x24840004,
- 0x03e00008, 0x00000000, 0x0a001587, 0x00a01021, 0xac860000, 0x00000000,
- 0x00000000, 0x24840004, 0x00a01021, 0x1440fffa, 0x24a5ffff, 0x03e00008,
- 0x00000000, 0x00000000 };
+ 0xa0a6000a, 0xa4a30010, 0xa0a00012, 0xa0a00013, 0xaca00014, 0xaca00024,
+ 0xaca00028, 0xaca0002c, 0xaca40018, 0x03e00008, 0xaf4201b8, 0x24020001,
+ 0xacc40000, 0x03e00008, 0xa4e50000, 0x24020001, 0xaf400044, 0x03e00008,
+ 0xaf400050, 0x00803021, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024,
+ 0x1440fffd, 0x00000000, 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1,
+ 0xa4a20008, 0xaca30018, 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a,
+ 0x94c20010, 0xa4a20010, 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013,
+ 0x8cc30014, 0xaca30014, 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028,
+ 0x8cc2002c, 0x3c031000, 0xaca2002c, 0x24020001, 0xaf4301b8, 0xaf400044,
+ 0x03e00008, 0xaf400050, 0x27bdffe8, 0xafbf0010, 0x0e001047, 0x00000000,
+ 0x00002021, 0x0e000c78, 0xaf400180, 0x8fbf0010, 0x03e00008, 0x27bd0018,
+ 0x8f460148, 0x27450180, 0x3c038000, 0x00061402, 0x304700ff, 0x8f4201b8,
+ 0x00431024, 0x1440fffd, 0x00000000, 0x8f440140, 0x00061202, 0x304200ff,
+ 0x00061c02, 0xaca20004, 0x24020002, 0xa4a30008, 0x30c300ff, 0xa0a2000b,
+ 0xaca30024, 0x10e0000a, 0xaca40000, 0x28e20004, 0x14400005, 0x24020001,
+ 0x24020005, 0x54e20005, 0xa0a0000a, 0x24020001, 0x0a001609, 0xa0a2000a,
+ 0xa0a0000a, 0x3c021000, 0x03e00008, 0xaf4201b8, 0x03e00008, 0x00001021,
+ 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000,
+ 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a00161f, 0x00a01021,
+ 0xac860000, 0x00000000, 0x00000000, 0x24840004, 0x00a01021, 0x1440fffa,
+ 0x24a5ffff, 0x03e00008, 0x00000000, 0x00000000 };
static u32 bnx2_RXP_b06FwData[(0x0/4) + 1] = { 0x0 };
-static u32 bnx2_RXP_b06FwRodata[(0x0/4) + 1] = { 0x0 };
-static u32 bnx2_RXP_b06FwBss[(0x1394/4) + 1] = { 0x0 };
-static u32 bnx2_RXP_b06FwSbss[(0x18/4) + 1] = { 0x0 };
+static u32 bnx2_RXP_b06FwRodata[(0x28/4) + 1] = {
+ 0x0800468c, 0x0800458c, 0x08004630, 0x08004648, 0x08004660, 0x08004680,
+ 0x0800468c, 0x0800468c, 0x08004594, 0x00000000, 0x00000000 };
+static u32 bnx2_RXP_b06FwBss[(0x13a4/4) + 1] = { 0x0 };
+static u32 bnx2_RXP_b06FwSbss[(0x1c/4) + 1] = { 0x0 };
static u32 bnx2_rv2p_proc1[] = {
0x00000008, 0xac000001, 0x0000000c, 0x2f800001, 0x00000010, 0x213f0004,
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2582d98..4ff006c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -576,7 +576,7 @@
slave->duplex = DUPLEX_FULL;
if (slave_dev->ethtool_ops) {
- u32 res;
+ int res;
if (!slave_dev->ethtool_ops->get_settings) {
return -1;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 40ae36b..7ef4b04 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -444,6 +444,7 @@
netif_rx(skb);
#endif
}
+ dev->last_rx = jiffies;
}
return received_packets;
@@ -461,7 +462,7 @@
*/
static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id,
- struct pt_regs *regs)
+ struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *)dev_id;
struct mv643xx_private *mp = netdev_priv(dev);
@@ -1047,16 +1048,15 @@
static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
{
- unsigned int frag;
- skb_frag_t *fragp;
+ unsigned int frag;
+ skb_frag_t *fragp;
- for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
- fragp = &skb_shinfo(skb)->frags[frag];
- if (fragp->size <= 8 && fragp->page_offset & 0x7)
- return 1;
-
- }
- return 0;
+ for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
+ fragp = &skb_shinfo(skb)->frags[frag];
+ if (fragp->size <= 8 && fragp->page_offset & 0x7)
+ return 1;
+ }
+ return 0;
}
@@ -2137,26 +2137,26 @@
*/
if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI)) {
for (table_index = 0; table_index <= 0xFC; table_index += 4) {
- /* Set all entries in DA filter special multicast
- * table (Ex_dFSMT)
- * Set for ETH_Q0 for now
- * Bits
- * 0 Accept=1, Drop=0
- * 3-1 Queue ETH_Q0=0
- * 7-4 Reserved = 0;
- */
- mv_write(MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
+ /* Set all entries in DA filter special multicast
+ * table (Ex_dFSMT)
+ * Set for ETH_Q0 for now
+ * Bits
+ * 0 Accept=1, Drop=0
+ * 3-1 Queue ETH_Q0=0
+ * 7-4 Reserved = 0;
+ */
+ mv_write(MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
- /* Set all entries in DA filter other multicast
- * table (Ex_dFOMT)
- * Set for ETH_Q0 for now
- * Bits
- * 0 Accept=1, Drop=0
- * 3-1 Queue ETH_Q0=0
- * 7-4 Reserved = 0;
- */
- mv_write(MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
- }
+ /* Set all entries in DA filter other multicast
+ * table (Ex_dFOMT)
+ * Set for ETH_Q0 for now
+ * Bits
+ * 0 Accept=1, Drop=0
+ * 3-1 Queue ETH_Q0=0
+ * 7-4 Reserved = 0;
+ */
+ mv_write(MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
+ }
return;
}
@@ -2617,7 +2617,6 @@
struct eth_tx_desc *current_descriptor;
struct eth_tx_desc *first_descriptor;
u32 command;
- unsigned long flags;
/* Do not process Tx ring in case of Tx ring resource error */
if (mp->tx_resource_err)
@@ -2634,8 +2633,6 @@
return ETH_ERROR;
}
- spin_lock_irqsave(&mp->lock, flags);
-
mp->tx_ring_skbs++;
BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size);
@@ -2685,15 +2682,11 @@
mp->tx_resource_err = 1;
mp->tx_curr_desc_q = tx_first_desc;
- spin_unlock_irqrestore(&mp->lock, flags);
-
return ETH_QUEUE_LAST_RESOURCE;
}
mp->tx_curr_desc_q = tx_next_desc;
- spin_unlock_irqrestore(&mp->lock, flags);
-
return ETH_OK;
}
#else
@@ -2704,14 +2697,11 @@
int tx_desc_used;
struct eth_tx_desc *current_descriptor;
unsigned int command_status;
- unsigned long flags;
/* Do not process Tx ring in case of Tx ring resource error */
if (mp->tx_resource_err)
return ETH_QUEUE_FULL;
- spin_lock_irqsave(&mp->lock, flags);
-
mp->tx_ring_skbs++;
BUG_ON(mp->tx_ring_skbs > mp->tx_ring_size);
@@ -2742,12 +2732,9 @@
/* Check for ring index overlap in the Tx desc ring */
if (tx_desc_curr == tx_desc_used) {
mp->tx_resource_err = 1;
-
- spin_unlock_irqrestore(&mp->lock, flags);
return ETH_QUEUE_LAST_RESOURCE;
}
- spin_unlock_irqrestore(&mp->lock, flags);
return ETH_OK;
}
#endif
@@ -2898,8 +2885,10 @@
p_pkt_info->return_info = mp->rx_skb[rx_curr_desc];
p_pkt_info->l4i_chk = p_rx_desc->buf_size;
- /* Clean the return info field to indicate that the packet has been */
- /* moved to the upper layers */
+ /*
+ * Clean the return info field to indicate that the
+ * packet has been moved to the upper layers
+ */
mp->rx_skb[rx_curr_desc] = NULL;
/* Update current index in data structure */
@@ -2980,7 +2969,7 @@
};
#define MV643XX_STAT(m) sizeof(((struct mv643xx_private *)0)->m), \
- offsetof(struct mv643xx_private, m)
+ offsetof(struct mv643xx_private, m)
static const struct mv643xx_stats mv643xx_gstrings_stats[] = {
{ "rx_packets", MV643XX_STAT(stats.rx_packets) },
@@ -3131,9 +3120,8 @@
return 0;
}
-static void
-mv643xx_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
+static void mv643xx_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
{
strncpy(drvinfo->driver, mv643xx_driver_name, 32);
strncpy(drvinfo->version, mv643xx_driver_version, 32);
@@ -3142,39 +3130,37 @@
drvinfo->n_stats = MV643XX_STATS_LEN;
}
-static int
-mv643xx_get_stats_count(struct net_device *netdev)
+static int mv643xx_get_stats_count(struct net_device *netdev)
{
return MV643XX_STATS_LEN;
}
-static void
-mv643xx_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, uint64_t *data)
+static void mv643xx_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, uint64_t *data)
{
struct mv643xx_private *mp = netdev->priv;
int i;
eth_update_mib_counters(mp);
- for(i = 0; i < MV643XX_STATS_LEN; i++) {
+ for (i = 0; i < MV643XX_STATS_LEN; i++) {
char *p = (char *)mp+mv643xx_gstrings_stats[i].stat_offset;
- data[i] = (mv643xx_gstrings_stats[i].sizeof_stat ==
+ data[i] = (mv643xx_gstrings_stats[i].sizeof_stat ==
sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
}
}
-static void
-mv643xx_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
+static void mv643xx_get_strings(struct net_device *netdev, uint32_t stringset,
+ uint8_t *data)
{
int i;
switch(stringset) {
case ETH_SS_STATS:
for (i=0; i < MV643XX_STATS_LEN; i++) {
- memcpy(data + i * ETH_GSTRING_LEN,
- mv643xx_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
+ memcpy(data + i * ETH_GSTRING_LEN,
+ mv643xx_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
}
break;
}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 89c4678..49b597c 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3586,7 +3586,7 @@
txdp->Buffer_Pointer = (u64) pci_map_page
(sp->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
- txdp->Control_1 |= TXD_BUFFER0_SIZE(frag->size);
+ txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
if (skb_shinfo(skb)->ufo_size)
txdp->Control_1 |= TXD_UFO_EN;
}
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index c8f6286..308f773 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -75,7 +75,7 @@
config HOSTAP_CS
tristate "Host AP driver for Prism2/2.5/3 PC Cards"
- depends on PCMCIA!=n && HOSTAP
+ depends on PCMCIA && HOSTAP
---help---
Host AP driver's version for Prism2/2.5/3 PC Cards.
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 8bf0276..6290c9f 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -2201,6 +2201,17 @@
#define SEARCH_SNAPSHOT 1
#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
+static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
+{
+ int i;
+ if (!priv->snapshot[0])
+ return;
+ for (i = 0; i < 0x30; i++)
+ kfree(priv->snapshot[i]);
+ priv->snapshot[0] = NULL;
+}
+
+#ifdef CONFIG_IPW2100_DEBUG_C3
static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
{
int i;
@@ -2221,16 +2232,6 @@
return 1;
}
-static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
-{
- int i;
- if (!priv->snapshot[0])
- return;
- for (i = 0; i < 0x30; i++)
- kfree(priv->snapshot[i]);
- priv->snapshot[0] = NULL;
-}
-
static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
size_t len, int mode)
{
@@ -2269,6 +2270,7 @@
return ret;
}
+#endif
/*
*
@@ -7112,11 +7114,17 @@
{
struct ipw2100_priv *priv = ieee80211_priv(dev);
int err = 0, value;
+
+ if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled))
+ return -EINPROGRESS;
if (priv->ieee->iw_mode != IW_MODE_ADHOC)
+ return 0;
+
+ if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
return -EINVAL;
- if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0)
+ if (wrqu->txpower.fixed == 0)
value = IPW_TX_POWER_DEFAULT;
else {
if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
@@ -7151,24 +7159,19 @@
struct ipw2100_priv *priv = ieee80211_priv(dev);
- if (priv->ieee->iw_mode != IW_MODE_ADHOC) {
- wrqu->power.disabled = 1;
- return 0;
- }
+ wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
- wrqu->power.fixed = 0;
- wrqu->power.value = IPW_TX_POWER_MAX_DBM;
- wrqu->power.disabled = 1;
+ wrqu->txpower.fixed = 0;
+ wrqu->txpower.value = IPW_TX_POWER_MAX_DBM;
} else {
- wrqu->power.disabled = 0;
- wrqu->power.fixed = 1;
- wrqu->power.value = priv->tx_power;
+ wrqu->txpower.fixed = 1;
+ wrqu->txpower.value = priv->tx_power;
}
- wrqu->power.flags = IW_TXPOW_DBM;
+ wrqu->txpower.flags = IW_TXPOW_DBM;
- IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value);
+ IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->txpower.value);
return 0;
}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 4c28e33..916b24c 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -8012,6 +8012,10 @@
else
IPW_DEBUG_INFO("Auto adhoc creation disabled.\n");
+ priv->config &= ~CFG_STATIC_ESSID;
+ priv->essid_len = 0;
+ memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
+
if (disable) {
priv->status |= STATUS_RF_KILL_SW;
IPW_DEBUG_INFO("Radio disabled.\n");
@@ -11035,7 +11039,6 @@
net_dev->set_multicast_list = ipw_net_set_multicast_list;
net_dev->set_mac_address = ipw_net_set_mac_address;
priv->wireless_data.spy_data = &priv->ieee->spy_data;
- priv->wireless_data.ieee80211 = priv->ieee;
net_dev->wireless_data = &priv->wireless_data;
net_dev->wireless_handlers = &ipw_wx_handler_def;
net_dev->ethtool_ops = &ipw_ethtool_ops;
@@ -11121,8 +11124,8 @@
/* Free MAC hash list for ADHOC */
for (i = 0; i < IPW_IBSS_MAC_HASH_SIZE; i++) {
list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) {
- kfree(list_entry(p, struct ipw_ibss_seq, list));
list_del(p);
+ kfree(list_entry(p, struct ipw_ibss_seq, list));
}
}
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index b664708..3c128b6 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -261,13 +261,13 @@
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
if (!ignore_cis_vcc)
goto next_entry;
}
} else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+ DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
if(!ignore_cis_vcc)
goto next_entry;
}
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 2f1289e..222a1cc 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -11,8 +11,7 @@
---help---
Say Y here if you have a motherboard with a PCI Hotplug controller.
This allows you to add and remove PCI cards while the machine is
- powered up and running. The file system pcihpfs must be mounted
- in order to interact with any PCI Hotplug controllers.
+ powered up and running.
To compile this driver as a module, choose M here: the
module will be called pci_hotplug.
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index 7e7f913..317457d 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -302,7 +302,7 @@
}
package = (union acpi_object *) buffer.pointer;
- if(!(package) ||
+ if (!(package) ||
(package->type != ACPI_TYPE_PACKAGE) ||
!(package->package.elements)) {
err("%s: Invalid APCI object\n", __FUNCTION__);
@@ -405,7 +405,7 @@
}
info.hardware_id.value[sizeof(info.hardware_id.value) - 1] = '\0';
- if(info.current_status && (info.valid & ACPI_VALID_HID) &&
+ if (info.current_status && (info.valid & ACPI_VALID_HID) &&
(!strcmp(info.hardware_id.value, IBM_HARDWARE_ID1) ||
!strcmp(info.hardware_id.value, IBM_HARDWARE_ID2))) {
dbg("found hardware: %s, handle: %p\n", info.hardware_id.value,
@@ -449,13 +449,11 @@
}
ibm_note.device = device;
- status = acpi_install_notify_handler(
- ibm_acpi_handle,
- ACPI_DEVICE_NOTIFY,
- ibm_handle_events,
+ status = acpi_install_notify_handler(ibm_acpi_handle,
+ ACPI_DEVICE_NOTIFY, ibm_handle_events,
&ibm_note);
if (ACPI_FAILURE(status)) {
- err("%s: Failed to register notification handler\n",
+ err("%s: Failed to register notification handler\n",
__FUNCTION__);
retval = -EBUSY;
goto init_cleanup;
@@ -482,14 +480,13 @@
if (acpiphp_unregister_attention(&ibm_attention_info))
err("%s: attention info deregistration failed", __FUNCTION__);
- status = acpi_remove_notify_handler(
+ status = acpi_remove_notify_handler(
ibm_acpi_handle,
ACPI_DEVICE_NOTIFY,
ibm_handle_events);
- if (ACPI_FAILURE(status))
- err("%s: Notification handler removal failed\n",
- __FUNCTION__);
- // remove the /sys entries
+ if (ACPI_FAILURE(status))
+ err("%s: Notification handler removal failed\n", __FUNCTION__);
+ /* remove the /sys entries */
if (sysfs_remove_bin_file(sysdir, &ibm_apci_table_attr))
err("%s: removal of sysfs file apci_table failed\n",
__FUNCTION__);
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index aabf1e7..dc59da6 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -235,12 +235,12 @@
{
int rc = 0;
struct slot *pslot;
- u8 cmd;
+ u8 cmd = 0x00; /* avoid compiler warning */
debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n",
(ulong) hotplug_slot, value);
ibmphp_lock_operations();
- cmd = 0x00; // avoid compiler warning
+
if (hotplug_slot) {
switch (value) {
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 7d93dba..3eefe2c 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -103,13 +103,13 @@
struct list_head *tmp, *n;
struct slot *slot;
- list_for_each_safe(tmp, n, &rpaphp_slot_head) {
- slot = list_entry(tmp, struct slot, rpaphp_slot_list);
- if (slot->dn == dn)
- return slot;
- }
+ list_for_each_safe(tmp, n, &rpaphp_slot_head) {
+ slot = list_entry(tmp, struct slot, rpaphp_slot_list);
+ if (slot->dn == dn)
+ return slot;
+ }
- return NULL;
+ return NULL;
}
static struct pci_dev *dlpar_find_new_dev(struct pci_bus *parent,
@@ -126,9 +126,9 @@
return NULL;
}
-static struct pci_dev *dlpar_pci_add_bus(struct device_node *dn)
+static void dlpar_pci_add_bus(struct device_node *dn)
{
- struct pci_dn *pdn = dn->data;
+ struct pci_dn *pdn = PCI_DN(dn);
struct pci_controller *phb = pdn->phb;
struct pci_dev *dev = NULL;
@@ -139,52 +139,52 @@
if (!dev) {
printk(KERN_ERR "%s: failed to create pci dev for %s\n",
__FUNCTION__, dn->full_name);
- return NULL;
+ return;
}
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
of_scan_pci_bridge(dn, dev);
- rpaphp_init_new_devs(dev->subordinate);
+ pcibios_fixup_new_pci_devices(dev->subordinate,0);
/* Claim new bus resources */
pcibios_claim_one_bus(dev->bus);
/* ioremap() for child bus, which may or may not succeed */
- (void) remap_bus_range(dev->bus);
+ remap_bus_range(dev->subordinate);
/* Add new devices to global lists. Register in proc, sysfs. */
pci_bus_add_devices(phb->bus);
-
- /* Confirm new bridge dev was created */
- dev = dlpar_find_new_dev(phb->bus, dn);
- if (dev) {
- if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
- printk(KERN_ERR "%s: unexpected header type %d\n",
- __FUNCTION__, dev->hdr_type);
- return NULL;
- }
- }
-
- return dev;
}
static int dlpar_add_pci_slot(char *drc_name, struct device_node *dn)
{
struct pci_dev *dev;
+ struct pci_controller *phb;
- if (rpaphp_find_pci_bus(dn))
+ if (pcibios_find_pci_bus(dn))
return -EINVAL;
/* Add pci bus */
- dev = dlpar_pci_add_bus(dn);
+ dlpar_pci_add_bus(dn);
+
+ /* Confirm new bridge dev was created */
+ phb = PCI_DN(dn)->phb;
+ dev = dlpar_find_new_dev(phb->bus, dn);
+
if (!dev) {
printk(KERN_ERR "%s: unable to add bus %s\n", __FUNCTION__,
drc_name);
return -EIO;
}
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
+ printk(KERN_ERR "%s: unexpected header type %d, unable to add bus %s\n",
+ __FUNCTION__, dev->hdr_type, drc_name);
+ return -EIO;
+ }
+
/* Add hotplug slot */
if (rpaphp_add_slot(dn)) {
printk(KERN_ERR "%s: unable to add hotplug slot %s\n",
@@ -221,13 +221,13 @@
struct pci_dn *pdn;
int rc = 0;
- if (!rpaphp_find_pci_bus(dn))
+ if (!pcibios_find_pci_bus(dn))
return -EINVAL;
slot = find_slot(dn);
if (slot) {
/* Remove hotplug slot */
- if (rpaphp_remove_slot(slot)) {
+ if (rpaphp_deregister_slot(slot)) {
printk(KERN_ERR
"%s: unable to remove hotplug slot %s\n",
__FUNCTION__, drc_name);
@@ -366,21 +366,25 @@
struct pci_bus *bus;
struct slot *slot;
- bus = rpaphp_find_pci_bus(dn);
+ bus = pcibios_find_pci_bus(dn);
if (!bus)
return -EINVAL;
slot = find_slot(dn);
if (slot) {
/* Remove hotplug slot */
- if (rpaphp_remove_slot(slot)) {
+ if (rpaphp_deregister_slot(slot)) {
printk(KERN_ERR
"%s: unable to remove hotplug slot %s\n",
__FUNCTION__, drc_name);
return -EIO;
}
} else {
- rpaphp_unconfig_pci_adapter(bus);
+ struct pci_dev *dev, *tmp;
+ list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+ eeh_remove_bus_device(dev);
+ pci_remove_bus_device(dev);
+ }
}
if (unmap_bus_range(bus)) {
diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h
index 57ea71a..310b618 100644
--- a/drivers/pci/hotplug/rpaphp.h
+++ b/drivers/pci/hotplug/rpaphp.h
@@ -88,16 +88,10 @@
/* function prototypes */
/* rpaphp_pci.c */
-extern struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn);
-extern int rpaphp_claim_resource(struct pci_dev *dev, int resource);
extern int rpaphp_enable_pci_slot(struct slot *slot);
-extern int register_pci_slot(struct slot *slot);
+extern int rpaphp_register_pci_slot(struct slot *slot);
extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value);
-extern void rpaphp_init_new_devs(struct pci_bus *bus);
-extern void rpaphp_eeh_init_nodes(struct device_node *dn);
-
-extern int rpaphp_config_pci_adapter(struct pci_bus *bus);
-extern int rpaphp_unconfig_pci_adapter(struct pci_bus *bus);
+extern int rpaphp_get_sensor_state(struct slot *slot, int *state);
/* rpaphp_core.c */
extern int rpaphp_add_slot(struct device_node *dn);
@@ -108,8 +102,8 @@
/* rpaphp_slot.c */
extern void dealloc_slot_struct(struct slot *slot);
extern struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_name, int power_domain);
-extern int register_slot(struct slot *slot);
-extern int deregister_slot(struct slot *slot);
+extern int rpaphp_register_slot(struct slot *slot);
+extern int rpaphp_deregister_slot(struct slot *slot);
extern int rpaphp_get_power_status(struct slot *slot, u8 * value);
extern int rpaphp_set_attention_status(struct slot *slot, u8 status);
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index cf075c3..6e79f56 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -56,25 +56,6 @@
module_param(debug, bool, 0644);
-static int enable_slot(struct hotplug_slot *slot);
-static int disable_slot(struct hotplug_slot *slot);
-static int set_attention_status(struct hotplug_slot *slot, u8 value);
-static int get_power_status(struct hotplug_slot *slot, u8 * value);
-static int get_attention_status(struct hotplug_slot *slot, u8 * value);
-static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value);
-
-struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
- .owner = THIS_MODULE,
- .enable_slot = enable_slot,
- .disable_slot = disable_slot,
- .set_attention_status = set_attention_status,
- .get_power_status = get_power_status,
- .get_attention_status = get_attention_status,
- .get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
-};
-
static int rpaphp_get_attention_status(struct slot *slot)
{
return slot->hotplug_slot->info->attention_status;
@@ -196,11 +177,6 @@
return 0;
}
-int rpaphp_remove_slot(struct slot *slot)
-{
- return deregister_slot(slot);
-}
-
static int get_children_props(struct device_node *dn, int **drc_indexes,
int **drc_names, int **drc_types, int **drc_power_domains)
{
@@ -307,13 +283,15 @@
return 0;
}
-/****************************************************************
+/**
+ * rpaphp_add_slot -- add hotplug or dlpar slot
+ *
* rpaphp not only registers PCI hotplug slots(HOTPLUG),
* but also logical DR slots(EMBEDDED).
* HOTPLUG slot: An adapter can be physically added/removed.
* EMBEDDED slot: An adapter can be logically removed/added
* from/to a partition with the slot.
- ***************************************************************/
+ */
int rpaphp_add_slot(struct device_node *dn)
{
struct slot *slot;
@@ -344,7 +322,7 @@
dbg("Found drc-index:0x%x drc-name:%s drc-type:%s\n",
indexes[i + 1], name, type);
- retval = register_pci_slot(slot);
+ retval = rpaphp_register_pci_slot(slot);
}
}
exit:
@@ -393,53 +371,85 @@
cleanup_slots();
}
+static int __enable_slot(struct slot *slot)
+{
+ int state;
+ int retval;
+
+ if (slot->state == CONFIGURED)
+ return 0;
+
+ retval = rpaphp_get_sensor_state(slot, &state);
+ if (retval)
+ return retval;
+
+ if (state == PRESENT) {
+ pcibios_add_pci_devices(slot->bus);
+ slot->state = CONFIGURED;
+ } else if (state == EMPTY) {
+ slot->state = EMPTY;
+ } else {
+ err("%s: slot[%s] is in invalid state\n", __FUNCTION__, slot->name);
+ slot->state = NOT_VALID;
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int enable_slot(struct hotplug_slot *hotplug_slot)
{
- int retval = 0;
+ int retval;
struct slot *slot = (struct slot *)hotplug_slot->private;
- if (slot->state == CONFIGURED) {
- dbg("%s: %s is already enabled\n", __FUNCTION__, slot->name);
- goto exit;
+ down(&rpaphp_sem);
+ retval = __enable_slot(slot);
+ up(&rpaphp_sem);
+
+ return retval;
+}
+
+static int __disable_slot(struct slot *slot)
+{
+ struct pci_dev *dev, *tmp;
+
+ if (slot->state == NOT_CONFIGURED)
+ return -EINVAL;
+
+ list_for_each_entry_safe(dev, tmp, &slot->bus->devices, bus_list) {
+ eeh_remove_bus_device(dev);
+ pci_remove_bus_device(dev);
}
- dbg("ENABLING SLOT %s\n", slot->name);
- down(&rpaphp_sem);
- retval = rpaphp_enable_pci_slot(slot);
- up(&rpaphp_sem);
-exit:
- dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
- return retval;
+ slot->state = NOT_CONFIGURED;
+ return 0;
}
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
- int retval = -EINVAL;
struct slot *slot = (struct slot *)hotplug_slot->private;
+ int retval;
- dbg("%s - Entry: slot[%s]\n", __FUNCTION__, slot->name);
-
- if (slot->state == NOT_CONFIGURED) {
- dbg("%s: %s is already disabled\n", __FUNCTION__, slot->name);
- goto exit;
- }
-
- dbg("DISABLING SLOT %s\n", slot->name);
down(&rpaphp_sem);
- retval = rpaphp_unconfig_pci_adapter(slot->bus);
+ retval = __disable_slot (slot);
up(&rpaphp_sem);
- slot->state = NOT_CONFIGURED;
- info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__,
- slot->name);
-exit:
- dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
+
return retval;
}
+struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
+ .owner = THIS_MODULE,
+ .enable_slot = enable_slot,
+ .disable_slot = disable_slot,
+ .set_attention_status = set_attention_status,
+ .get_power_status = get_power_status,
+ .get_attention_status = get_attention_status,
+ .get_adapter_status = get_adapter_status,
+ .get_max_bus_speed = get_max_bus_speed,
+};
+
module_init(rpaphp_init);
module_exit(rpaphp_exit);
EXPORT_SYMBOL_GPL(rpaphp_add_slot);
-EXPORT_SYMBOL_GPL(rpaphp_remove_slot);
EXPORT_SYMBOL_GPL(rpaphp_slot_head);
EXPORT_SYMBOL_GPL(rpaphp_get_drc_props);
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index 396b54b..6f6cbed 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -32,37 +32,7 @@
#include "../pci.h" /* for pci_add_new_bus */
#include "rpaphp.h"
-static struct pci_bus *find_bus_among_children(struct pci_bus *bus,
- struct device_node *dn)
-{
- struct pci_bus *child = NULL;
- struct list_head *tmp;
- struct device_node *busdn;
-
- busdn = pci_bus_to_OF_node(bus);
- if (busdn == dn)
- return bus;
-
- list_for_each(tmp, &bus->children) {
- child = find_bus_among_children(pci_bus_b(tmp), dn);
- if (child)
- break;
- }
- return child;
-}
-
-struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn)
-{
- struct pci_dn *pdn = dn->data;
-
- if (!pdn || !pdn->phb || !pdn->phb->bus)
- return NULL;
-
- return find_bus_among_children(pdn->phb->bus, dn);
-}
-EXPORT_SYMBOL_GPL(rpaphp_find_pci_bus);
-
-static int rpaphp_get_sensor_state(struct slot *slot, int *state)
+int rpaphp_get_sensor_state(struct slot *slot, int *state)
{
int rc;
int setlevel;
@@ -120,7 +90,7 @@
/* config/unconfig adapter */
*value = slot->state;
} else {
- bus = rpaphp_find_pci_bus(slot->dn);
+ bus = pcibios_find_pci_bus(slot->dn);
if (bus && !list_empty(&bus->devices))
*value = CONFIGURED;
else
@@ -131,140 +101,6 @@
return rc;
}
-/* Must be called before pci_bus_add_devices */
-void rpaphp_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- /*
- * Skip already-present devices (which are on the
- * global device list.)
- */
- if (list_empty(&dev->global_list)) {
- int i;
-
- /* Need to setup IOMMU tables */
- ppc_md.iommu_dev_setup(dev);
-
- if(fix_bus)
- pcibios_fixup_device_resources(dev, bus);
- pci_read_irq_line(dev);
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- struct resource *r = &dev->resource[i];
-
- if (r->parent || !r->start || !r->flags)
- continue;
- pci_claim_resource(dev, i);
- }
- }
- }
-}
-
-static void rpaphp_eeh_add_bus_device(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_add_device_late(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *subbus = dev->subordinate;
- if (subbus)
- rpaphp_eeh_add_bus_device (subbus);
- }
- }
-}
-
-static int rpaphp_pci_config_bridge(struct pci_dev *dev)
-{
- u8 sec_busno;
- struct pci_bus *child_bus;
- struct pci_dev *child_dev;
-
- dbg("Enter %s: BRIDGE dev=%s\n", __FUNCTION__, pci_name(dev));
-
- /* get busno of downstream bus */
- pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
-
- /* add to children of PCI bridge dev->bus */
- child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
- if (!child_bus) {
- err("%s: could not add second bus\n", __FUNCTION__);
- return -EIO;
- }
- sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
- /* do pci_scan_child_bus */
- pci_scan_child_bus(child_bus);
-
- list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
- eeh_add_device_late(child_dev);
- }
-
- /* fixup new pci devices without touching bus struct */
- rpaphp_fixup_new_pci_devices(child_bus, 0);
-
- /* Make the discovered devices available */
- pci_bus_add_devices(child_bus);
- return 0;
-}
-
-void rpaphp_init_new_devs(struct pci_bus *bus)
-{
- rpaphp_fixup_new_pci_devices(bus, 0);
- rpaphp_eeh_add_bus_device(bus);
-}
-EXPORT_SYMBOL_GPL(rpaphp_init_new_devs);
-
-/*****************************************************************************
- rpaphp_pci_config_slot() will configure all devices under the
- given slot->dn and return the the first pci_dev.
- *****************************************************************************/
-static struct pci_dev *
-rpaphp_pci_config_slot(struct pci_bus *bus)
-{
- struct device_node *dn = pci_bus_to_OF_node(bus);
- struct pci_dev *dev = NULL;
- int slotno;
- int num;
-
- dbg("Enter %s: dn=%s bus=%s\n", __FUNCTION__, dn->full_name, bus->name);
- if (!dn || !dn->child)
- return NULL;
-
- if (_machine == PLATFORM_PSERIES_LPAR) {
- of_scan_bus(dn, bus);
- if (list_empty(&bus->devices)) {
- err("%s: No new device found\n", __FUNCTION__);
- return NULL;
- }
-
- rpaphp_init_new_devs(bus);
- pci_bus_add_devices(bus);
- dev = list_entry(&bus->devices, struct pci_dev, bus_list);
- } else {
- slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
-
- /* pci_scan_slot should find all children */
- num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (num) {
- rpaphp_fixup_new_pci_devices(bus, 1);
- pci_bus_add_devices(bus);
- }
- if (list_empty(&bus->devices)) {
- err("%s: No new device found\n", __FUNCTION__);
- return NULL;
- }
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- rpaphp_pci_config_bridge(dev);
-
- rpaphp_eeh_add_bus_device(bus);
- }
- }
-
- return dev;
-}
-
static void print_slot_pci_funcs(struct pci_bus *bus)
{
struct device_node *dn;
@@ -280,60 +116,6 @@
return;
}
-int rpaphp_config_pci_adapter(struct pci_bus *bus)
-{
- struct device_node *dn = pci_bus_to_OF_node(bus);
- struct pci_dev *dev;
- int rc = -ENODEV;
-
- dbg("Entry %s: slot[%s]\n", __FUNCTION__, dn->full_name);
- if (!dn)
- goto exit;
-
- eeh_add_device_tree_early(dn);
- dev = rpaphp_pci_config_slot(bus);
- if (!dev) {
- err("%s: can't find any devices.\n", __FUNCTION__);
- goto exit;
- }
- print_slot_pci_funcs(bus);
- rc = 0;
-exit:
- dbg("Exit %s: rc=%d\n", __FUNCTION__, rc);
- return rc;
-}
-EXPORT_SYMBOL_GPL(rpaphp_config_pci_adapter);
-
-static void rpaphp_eeh_remove_bus_device(struct pci_dev *dev)
-{
- eeh_remove_device(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *bus = dev->subordinate;
- struct list_head *ln;
- if (!bus)
- return;
- for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
- struct pci_dev *pdev = pci_dev_b(ln);
- if (pdev)
- rpaphp_eeh_remove_bus_device(pdev);
- }
-
- }
- return;
-}
-
-int rpaphp_unconfig_pci_adapter(struct pci_bus *bus)
-{
- struct pci_dev *dev, *tmp;
-
- list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
- rpaphp_eeh_remove_bus_device(dev);
- pci_remove_bus_device(dev);
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(rpaphp_unconfig_pci_adapter);
-
static int setup_pci_hotplug_slot_info(struct slot *slot)
{
struct hotplug_slot_info *hotplug_slot_info = slot->hotplug_slot->info;
@@ -370,7 +152,7 @@
struct pci_bus *bus;
BUG_ON(!dn);
- bus = rpaphp_find_pci_bus(dn);
+ bus = pcibios_find_pci_bus(dn);
if (!bus) {
err("%s: no pci_bus for dn %s\n", __FUNCTION__, dn->full_name);
goto exit_rc;
@@ -395,10 +177,7 @@
if (slot->hotplug_slot->info->adapter_status == NOT_CONFIGURED) {
dbg("%s CONFIGURING pci adapter in slot[%s]\n",
__FUNCTION__, slot->name);
- if (rpaphp_config_pci_adapter(slot->bus)) {
- err("%s: CONFIG pci adapter failed\n", __FUNCTION__);
- goto exit_rc;
- }
+ pcibios_add_pci_devices(slot->bus);
} else if (slot->hotplug_slot->info->adapter_status != CONFIGURED) {
err("%s: slot[%s]'s adapter_status is NOT_VALID.\n",
@@ -420,7 +199,7 @@
return -EINVAL;
}
-int register_pci_slot(struct slot *slot)
+int rpaphp_register_pci_slot(struct slot *slot)
{
int rc = -EINVAL;
@@ -428,42 +207,8 @@
goto exit_rc;
if (setup_pci_slot(slot))
goto exit_rc;
- rc = register_slot(slot);
+ rc = rpaphp_register_slot(slot);
exit_rc:
return rc;
}
-int rpaphp_enable_pci_slot(struct slot *slot)
-{
- int retval = 0, state;
-
- retval = rpaphp_get_sensor_state(slot, &state);
- if (retval)
- goto exit;
- dbg("%s: sensor state[%d]\n", __FUNCTION__, state);
- /* if slot is not empty, enable the adapter */
- if (state == PRESENT) {
- dbg("%s : slot[%s] is occupied.\n", __FUNCTION__, slot->name);
- retval = rpaphp_config_pci_adapter(slot->bus);
- if (!retval) {
- slot->state = CONFIGURED;
- info("%s: devices in slot[%s] configured\n",
- __FUNCTION__, slot->name);
- } else {
- slot->state = NOT_CONFIGURED;
- dbg("%s: no pci_dev struct for adapter in slot[%s]\n",
- __FUNCTION__, slot->name);
- }
- } else if (state == EMPTY) {
- dbg("%s : slot[%s] is empty\n", __FUNCTION__, slot->name);
- slot->state = EMPTY;
- } else {
- err("%s: slot[%s] is in invalid state\n", __FUNCTION__,
- slot->name);
- slot->state = NOT_VALID;
- retval = -EINVAL;
- }
-exit:
- dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
- return retval;
-}
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index daa89ae..04cc1e7 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -35,16 +35,16 @@
static ssize_t location_read_file (struct hotplug_slot *php_slot, char *buf)
{
- char *value;
- int retval = -ENOENT;
+ char *value;
+ int retval = -ENOENT;
struct slot *slot = (struct slot *)php_slot->private;
if (!slot)
return retval;
- value = slot->location;
- retval = sprintf (buf, "%s\n", value);
- return retval;
+ value = slot->location;
+ retval = sprintf (buf, "%s\n", value);
+ return retval;
}
static struct hotplug_slot_attribute hotplug_slot_attr_location = {
@@ -137,7 +137,7 @@
return 0;
}
-int deregister_slot(struct slot *slot)
+int rpaphp_deregister_slot(struct slot *slot)
{
int retval = 0;
struct hotplug_slot *php_slot = slot->hotplug_slot;
@@ -160,7 +160,7 @@
return retval;
}
-int register_slot(struct slot *slot)
+int rpaphp_register_slot(struct slot *slot)
{
int retval;
@@ -169,7 +169,7 @@
slot->power_domain, slot->type);
/* should not try to register the same slot twice */
if (is_registered(slot)) { /* should't be here */
- err("register_slot: slot[%s] is already registered\n", slot->name);
+ err("rpaphp_register_slot: slot[%s] is already registered\n", slot->name);
rpaphp_release_slot(slot->hotplug_slot);
return -EAGAIN;
}
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index ce0e9b6..7d6f521 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -95,6 +95,7 @@
u8 function;
u8 slot_device_offset;
u8 add_support;
+ u32 pcix_misc2_reg; /* for amd pogo errata */
enum pci_bus_speed speed;
u32 first_slot; /* First physical slot number */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
@@ -113,6 +114,26 @@
/* Define AMD SHPC ID */
#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
+#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
+
+/* AMD PCIX bridge registers */
+
+#define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C
+#define PCIX_MISCII_OFFSET 0x48
+#define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80
+
+/* AMD PCIX_MISCII masks and offsets */
+#define PERRNONFATALENABLE_MASK 0x00040000
+#define PERRFATALENABLE_MASK 0x00080000
+#define PERRFLOODENABLE_MASK 0x00100000
+#define SERRNONFATALENABLE_MASK 0x00200000
+#define SERRFATALENABLE_MASK 0x00400000
+
+/* AMD PCIX_MISC_BRIDGE_ERRORS masks and offsets */
+#define PERR_OBSERVED_MASK 0x00000001
+
+/* AMD PCIX_MEM_BASE_LIMIT masks */
+#define RSE_MASK 0x40000000
#define INT_BUTTON_IGNORE 0
#define INT_PRESENCE_ON 1
@@ -333,6 +354,79 @@
return retval;
}
+static inline void amd_pogo_errata_save_misc_reg(struct slot *p_slot)
+{
+ u32 pcix_misc2_temp;
+
+ /* save MiscII register */
+ pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, &pcix_misc2_temp);
+
+ p_slot->ctrl->pcix_misc2_reg = pcix_misc2_temp;
+
+ /* clear SERR/PERR enable bits */
+ pcix_misc2_temp &= ~SERRFATALENABLE_MASK;
+ pcix_misc2_temp &= ~SERRNONFATALENABLE_MASK;
+ pcix_misc2_temp &= ~PERRFLOODENABLE_MASK;
+ pcix_misc2_temp &= ~PERRFATALENABLE_MASK;
+ pcix_misc2_temp &= ~PERRNONFATALENABLE_MASK;
+ pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
+}
+
+static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
+{
+ u32 pcix_misc2_temp;
+ u32 pcix_bridge_errors_reg;
+ u32 pcix_mem_base_reg;
+ u8 perr_set;
+ u8 rse_set;
+
+ /* write-one-to-clear Bridge_Errors[ PERR_OBSERVED ] */
+ pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg);
+ perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK;
+ if (perr_set) {
+ dbg ("%s W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__FUNCTION__ , perr_set);
+
+ pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set);
+ }
+
+ /* write-one-to-clear Memory_Base_Limit[ RSE ] */
+ pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg);
+ rse_set = pcix_mem_base_reg & RSE_MASK;
+ if (rse_set) {
+ dbg ("%s W1C: Memory_Base_Limit[ RSE ]\n",__FUNCTION__ );
+
+ pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set);
+ }
+ /* restore MiscII register */
+ pci_read_config_dword( p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, &pcix_misc2_temp );
+
+ if (p_slot->ctrl->pcix_misc2_reg & SERRFATALENABLE_MASK)
+ pcix_misc2_temp |= SERRFATALENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~SERRFATALENABLE_MASK;
+
+ if (p_slot->ctrl->pcix_misc2_reg & SERRNONFATALENABLE_MASK)
+ pcix_misc2_temp |= SERRNONFATALENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~SERRNONFATALENABLE_MASK;
+
+ if (p_slot->ctrl->pcix_misc2_reg & PERRFLOODENABLE_MASK)
+ pcix_misc2_temp |= PERRFLOODENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~PERRFLOODENABLE_MASK;
+
+ if (p_slot->ctrl->pcix_misc2_reg & PERRFATALENABLE_MASK)
+ pcix_misc2_temp |= PERRFATALENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~PERRFATALENABLE_MASK;
+
+ if (p_slot->ctrl->pcix_misc2_reg & PERRNONFATALENABLE_MASK)
+ pcix_misc2_temp |= PERRNONFATALENABLE_MASK;
+ else
+ pcix_misc2_temp &= ~PERRNONFATALENABLE_MASK;
+ pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
+}
+
#define SLOT_NAME_SIZE 10
static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 25ccb0e..643252d 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -894,7 +894,17 @@
dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
- rc = board_added(p_slot);
+ if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
+ (p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458))
+ && p_slot->ctrl->num_slots == 1) {
+ /* handle amd pogo errata; this must be done before enable */
+ amd_pogo_errata_save_misc_reg(p_slot);
+ rc = board_added(p_slot);
+ /* handle amd pogo errata; this must be done after enable */
+ amd_pogo_errata_restore_misc_reg(p_slot);
+ } else
+ rc = board_added(p_slot);
+
if (rc) {
p_slot->hpc_ops->get_adapter_status(p_slot,
&(p_slot->presence_save));
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 202b750..48723d6 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -137,6 +137,8 @@
break;
}
}
+#else
+#define set_msi_affinity NULL
#endif /* CONFIG_SMP */
static void mask_MSI_irq(unsigned int vector)
@@ -214,7 +216,7 @@
.disable = mask_MSI_irq,
.ack = mask_MSI_irq,
.end = end_msi_irq_w_maskbit,
- .set_affinity = set_msi_irq_affinity
+ .set_affinity = set_msi_affinity
};
/*
@@ -230,7 +232,7 @@
.disable = mask_MSI_irq,
.ack = mask_MSI_irq,
.end = end_msi_irq_w_maskbit,
- .set_affinity = set_msi_irq_affinity
+ .set_affinity = set_msi_affinity
};
/*
@@ -246,7 +248,7 @@
.disable = do_nothing,
.ack = do_nothing,
.end = end_msi_irq_wo_maskbit,
- .set_affinity = set_msi_irq_affinity
+ .set_affinity = set_msi_affinity
};
static void msi_data_init(struct msg_data *msi_data,
@@ -416,7 +418,9 @@
static void irq_handler_init(int cap_id, int pos, int mask)
{
- spin_lock(&irq_desc[pos].lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_desc[pos].lock, flags);
if (cap_id == PCI_CAP_ID_MSIX)
irq_desc[pos].handler = &msix_irq_type;
else {
@@ -425,7 +429,7 @@
else
irq_desc[pos].handler = &msi_irq_w_maskbit_type;
}
- spin_unlock(&irq_desc[pos].lock);
+ spin_unlock_irqrestore(&irq_desc[pos].lock, flags);
}
static void enable_msi_mode(struct pci_dev *dev, int pos, int type)
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 402136a..4ac52d4 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -22,12 +22,6 @@
extern void (*interrupt[NR_IRQS])(void);
extern int pci_vector_resources(int last, int nr_released);
-#ifdef CONFIG_SMP
-#define set_msi_irq_affinity set_msi_affinity
-#else
-#define set_msi_irq_affinity NULL
-#endif
-
/*
* MSI-X Address Register
*/
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d2a633e..d2d1879 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -163,6 +163,7 @@
return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
}
+#if 0
/**
* pci_find_ext_capability - Find an extended capability
* @dev: PCI device to query
@@ -210,6 +211,7 @@
return 0;
}
+#endif /* 0 */
/**
* pci_find_parent_resource - return resource region of parent bus of given region
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 50d6685..ea9277b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -112,6 +112,7 @@
return err;
}
+EXPORT_SYMBOL_GPL(pci_claim_resource);
int pci_assign_resource(struct pci_dev *dev, int resno)
{
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 69ed77f..7955ebe 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -37,13 +37,13 @@
config AIC79XX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
depends on SCSI_AIC79XX
- default "15000"
+ default "5000"
---help---
The number of milliseconds to delay after an initial bus reset.
The bus settle delay following all error recovery actions is
dictated by the SCSI layer and is not affected by this value.
- Default: 15000 (15 seconds)
+ Default: 5000 (5 seconds)
config AIC79XX_BUILD_FIRMWARE
bool "Build Adapter Firmware with Kernel Build"
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 2cfdbef..1d11f7e 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#108 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#109 $
*
* $FreeBSD$
*/
@@ -222,6 +222,7 @@
typedef enum {
AHD_FENONE = 0x00000,
AHD_WIDE = 0x00001,/* Wide Channel */
+ AHD_AIC79XXB_SLOWCRC = 0x00002,/* SLOWCRC bit should be set */
AHD_MULTI_FUNC = 0x00100,/* Multi-Function/Channel Device */
AHD_TARGETMODE = 0x01000,/* Has tested target mode support */
AHD_MULTIROLE = 0x02000,/* Space for two roles at a time */
diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg
index 3a32047..be14e2e 100644
--- a/drivers/scsi/aic7xxx/aic79xx.reg
+++ b/drivers/scsi/aic7xxx/aic79xx.reg
@@ -1,7 +1,7 @@
/*
* Aic79xx register and scratch ram definitions.
*
- * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 1994-2001, 2004 Justin T. Gibbs.
* Copyright (c) 2000-2002 Adaptec Inc.
* All rights reserved.
*
@@ -39,7 +39,7 @@
*
* $FreeBSD$
*/
-VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#76 $"
+VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $"
/*
* This file is processed by the aic7xxx_asm utility for use in assembling
@@ -3715,8 +3715,9 @@
SEQ_FLAGS2 {
size 1
- field TARGET_MSG_PENDING 0x02
- field SELECTOUT_QFROZEN 0x04
+ field PENDING_MK_MESSAGE 0x01
+ field TARGET_MSG_PENDING 0x02
+ field SELECTOUT_QFROZEN 0x04
}
ALLOCFIFO_SCBPTR {
@@ -3777,6 +3778,26 @@
CMDSIZE_TABLE {
size 8
}
+ /*
+ * When an SCB with the MK_MESSAGE flag is
+ * queued to the controller, it cannot enter
+ * the waiting for selection list until the
+ * selections for any previously queued
+ * commands to that target complete. During
+ * the wait, the MK_MESSAGE SCB is queued
+ * here.
+ */
+ MK_MESSAGE_SCB {
+ size 2
+ }
+ /*
+ * Saved SCSIID of MK_MESSAGE_SCB to avoid
+ * an extra SCBPTR operation when deciding
+ * if the MK_MESSAGE_SCB can be run.
+ */
+ MK_MESSAGE_SCSIID {
+ size 1
+ }
}
/************************* Hardware SCB Definition ****************************/
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index bef1f9d..58bc175 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -1,7 +1,7 @@
/*
* Adaptec U320 device driver firmware for Linux and FreeBSD.
*
- * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 1994-2001, 2004 Justin T. Gibbs.
* Copyright (c) 2000-2002 Adaptec Inc.
* All rights reserved.
*
@@ -40,7 +40,7 @@
* $FreeBSD$
*/
-VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#119 $"
+VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $"
PATCH_ARG_LIST = "struct ahd_softc *ahd"
PREFIX = "ahd_"
@@ -110,10 +110,8 @@
* one last time.
*/
test SSTAT0, SELDO jnz select_out;
-END_CRITICAL;
call start_selection;
idle_loop_checkbus:
-BEGIN_CRITICAL;
test SSTAT0, SELDO jnz select_out;
END_CRITICAL;
test SSTAT0, SELDI jnz select_in;
@@ -294,7 +292,6 @@
test CCSCBCTL, ARRDONE jz return;
fetch_new_scb_done:
and CCSCBCTL, ~(CCARREN|CCSCBEN);
- bmov REG0, SCBPTR, 2;
clr A;
add CMDS_PENDING, 1;
adc CMDS_PENDING[1], A;
@@ -316,43 +313,117 @@
clr SCB_FIFO_USE_COUNT;
/* Update the next SCB address to download. */
bmov NEXT_QUEUED_SCB_ADDR, SCB_NEXT_SCB_BUSADDR, 4;
+ /*
+ * NULL out the SCB links since these fields
+ * occupy the same location as SCB_NEXT_SCB_BUSADDR.
+ */
mvi SCB_NEXT[1], SCB_LIST_NULL;
mvi SCB_NEXT2[1], SCB_LIST_NULL;
/* Increment our position in the QINFIFO. */
mov NONE, SNSCB_QOFF;
+
/*
- * SCBs that want to send messages are always
- * queued independently. This ensures that they
- * are at the head of the SCB list to select out
- * to a target and we will see the MK_MESSAGE flag.
+ * Save SCBID of this SCB in REG0 since
+ * SCBPTR will be clobbered during target
+ * list updates. We also record the SCB's
+ * flags so that we can refer to them even
+ * after SCBPTR has been changed.
*/
- test SCB_CONTROL, MK_MESSAGE jnz first_new_target_scb;
+ bmov REG0, SCBPTR, 2;
+ mov A, SCB_CONTROL;
+
+ /*
+ * Find the tail SCB of the execution queue
+ * for this target.
+ */
shr SINDEX, 3, SCB_SCSIID;
and SINDEX, ~0x1;
mvi SINDEX[1], (WAITING_SCB_TAILS >> 8);
bmov DINDEX, SINDEX, 2;
bmov SCBPTR, SINDIR, 2;
+
+ /*
+ * Update the tail to point to the new SCB.
+ */
bmov DINDIR, REG0, 2;
+
+ /*
+ * If the queue was empty, queue this SCB as
+ * the first for this target.
+ */
cmp SCBPTR[1], SCB_LIST_NULL je first_new_target_scb;
+
+ /*
+ * SCBs that want to send messages must always be
+ * at the head of their per-target queue so that
+ * ATN can be asserted even if the current
+ * negotiation agreement is packetized. If the
+ * target queue is empty, the SCB can be queued
+ * immediately. If the queue is not empty, we must
+ * wait for it to empty before entering this SCB
+ * into the waiting for selection queue. Otherwise
+ * our batching and round-robin selection scheme
+ * could allow commands to be queued out of order.
+ * To simplify the implementation, we stop pulling
+ * new commands from the host until the MK_MESSAGE
+ * SCB can be queued to the waiting for selection
+ * list.
+ */
+ test A, MK_MESSAGE jz batch_scb;
+
+ /*
+ * If the last SCB is also a MK_MESSAGE SCB, then
+ * order is preserved even if we batch.
+ */
+ test SCB_CONTROL, MK_MESSAGE jz batch_scb;
+
+ /*
+ * Defer this SCB and stop fetching new SCBs until
+ * it can be queued. Since the SCB_SCSIID of the
+ * tail SCB must be the same as that of the newly
+ * queued SCB, there is no need to restore the SCBID
+ * here.
+ */
+ or SEQ_FLAGS2, PENDING_MK_MESSAGE;
+ bmov MK_MESSAGE_SCB, REG0, 2;
+ mov MK_MESSAGE_SCSIID, SCB_SCSIID ret;
+
+batch_scb:
+ /*
+ * Otherwise just update the previous tail SCB to
+ * point to the new tail.
+ */
bmov SCB_NEXT, REG0, 2 ret;
+
first_new_target_scb:
+ /*
+ * Append SCB to the tail of the waiting for
+ * selection list.
+ */
cmp WAITING_TID_HEAD[1], SCB_LIST_NULL je first_new_scb;
bmov SCBPTR, WAITING_TID_TAIL, 2;
bmov SCB_NEXT2, REG0, 2;
bmov WAITING_TID_TAIL, REG0, 2 ret;
first_new_scb:
+ /*
+ * Whole list is empty, so the head of
+ * the list must be initialized too.
+ */
bmov WAITING_TID_HEAD, REG0, 2;
bmov WAITING_TID_TAIL, REG0, 2 ret;
END_CRITICAL;
scbdma_idle:
/*
- * Give precedence to downloading new SCBs to execute
- * unless select-outs are currently frozen.
+ * Don't bother downloading new SCBs to execute
+ * if select-outs are currently frozen or we have
+ * a MK_MESSAGE SCB waiting to enter the queue.
*/
- test SEQ_FLAGS2, SELECTOUT_QFROZEN jnz . + 2;
+ test SEQ_FLAGS2, SELECTOUT_QFROZEN|PENDING_MK_MESSAGE
+ jnz scbdma_no_new_scbs;
BEGIN_CRITICAL;
test QOFF_CTLSTA, NEW_SCB_AVAIL jnz fetch_new_scb;
+scbdma_no_new_scbs:
cmp COMPLETE_DMA_SCB_HEAD[1], SCB_LIST_NULL jne dma_complete_scb;
cmp COMPLETE_SCB_HEAD[1], SCB_LIST_NULL je return;
/* FALLTHROUGH */
@@ -671,27 +742,41 @@
}
/*
- * Requeue any SCBs not sent, to the tail of the waiting Q.
+ * The whole list made it. Clear our tail pointer to indicate
+ * that the per-target selection queue is now empty.
*/
- cmp SCB_NEXT[1], SCB_LIST_NULL je select_out_list_done;
+ cmp SCB_NEXT[1], SCB_LIST_NULL je select_out_clear_tail;
/*
+ * Requeue any SCBs not sent, to the tail of the waiting Q.
* We know that neither the per-TID list nor the list of
- * TIDs is empty. Use this knowledge to our advantage.
+ * TIDs is empty. Use this knowledge to our advantage and
+ * queue the remainder to the tail of the global execution
+ * queue.
*/
bmov REG0, SCB_NEXT, 2;
+select_out_queue_remainder:
bmov SCBPTR, WAITING_TID_TAIL, 2;
bmov SCB_NEXT2, REG0, 2;
bmov WAITING_TID_TAIL, REG0, 2;
jmp select_out_inc_tid_q;
-select_out_list_done:
+select_out_clear_tail:
/*
- * The whole list made it. Just clear our TID's tail pointer
- * unless we were queued independently due to our need to
- * send a message.
+ * Queue any pending MK_MESSAGE SCB for this target now
+ * that the queue is empty.
*/
- test SCB_CONTROL, MK_MESSAGE jnz select_out_inc_tid_q;
+ test SEQ_FLAGS2, PENDING_MK_MESSAGE jz select_out_no_mk_message_scb;
+ mov A, MK_MESSAGE_SCSIID;
+ cmp SCB_SCSIID, A jne select_out_no_mk_message_scb;
+ and SEQ_FLAGS2, ~PENDING_MK_MESSAGE;
+ bmov REG0, MK_MESSAGE_SCB, 2;
+ jmp select_out_queue_remainder;
+
+select_out_no_mk_message_scb:
+ /*
+ * Clear this target's execution tail and increment the queue.
+ */
shr DINDEX, 3, SCB_SCSIID;
or DINDEX, 1; /* Want only the second byte */
mvi DINDEX[1], ((WAITING_SCB_TAILS) >> 8);
@@ -703,8 +788,8 @@
mvi WAITING_TID_TAIL[1], SCB_LIST_NULL;
bmov SCBPTR, CURRSCB, 2;
mvi CLRSINT0, CLRSELDO;
- test LQOSTAT2, LQOPHACHGOUTPKT jnz unexpected_nonpkt_phase;
- test LQOSTAT1, LQOPHACHGINPKT jnz unexpected_nonpkt_phase;
+ test LQOSTAT2, LQOPHACHGOUTPKT jnz unexpected_nonpkt_mode_cleared;
+ test LQOSTAT1, LQOPHACHGINPKT jnz unexpected_nonpkt_mode_cleared;
/*
* If this is a packetized connection, return to our
@@ -2127,6 +2212,18 @@
mvi DFFSXFRCTL, CLRCHN;
unexpected_nonpkt_mode_cleared:
mvi CLRSINT2, CLRNONPACKREQ;
+ if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
+ /*
+ * Test to ensure that the bus has not
+ * already gone free prior to clearing
+ * any stale busfree status. This avoids
+ * a window whereby a busfree just after
+ * a selection could be missed.
+ */
+ test SCSISIGI, BSYI jz . + 2;
+ mvi CLRSINT1,CLRBUSFREE;
+ or SIMODE1, ENBUSFREE;
+ }
test SCSIPHASE, ~(MSG_IN_PHASE|MSG_OUT_PHASE) jnz illegal_phase;
SET_SEQINTCODE(ENTERING_NONPACK)
jmp ITloop;
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index db8f5ce..342f779 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#247 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#250 $
*/
#ifdef __linux__
@@ -197,7 +197,8 @@
char channel, int lun, u_int tag,
role_t role, uint32_t status,
ahd_search_action action,
- u_int *list_head, u_int tid);
+ u_int *list_head, u_int *list_tail,
+ u_int tid);
static void ahd_stitch_tid_list(struct ahd_softc *ahd,
u_int tid_prev, u_int tid_cur,
u_int tid_next);
@@ -1660,7 +1661,8 @@
* so just clear the error.
*/
ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ);
- } else if ((status & BUSFREE) != 0) {
+ } else if ((status & BUSFREE) != 0
+ || (lqistat1 & LQOBUSFREE) != 0) {
u_int lqostat1;
int restart;
int clear_fifo;
@@ -2025,10 +2027,6 @@
u_int waiting_t;
u_int next;
- if ((busfreetime & BUSFREE_LQO) == 0)
- printf("%s: Warning, BUSFREE time is 0x%x. "
- "Expected BUSFREE_LQO.\n",
- ahd_name(ahd), busfreetime);
/*
* The LQO manager detected an unexpected busfree
* either:
@@ -2251,8 +2249,14 @@
struct ahd_tmode_tstate *tstate;
/*
- * PPR Rejected. Try non-ppr negotiation
- * and retry command.
+ * PPR Rejected.
+ *
+ * If the previous negotiation was packetized,
+ * this could be because the device has been
+ * reset without our knowledge. Force our
+ * current negotiation to async and retry the
+ * negotiation. Otherwise retry the command
+ * with non-ppr negotiation.
*/
#ifdef AHD_DEBUG
if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
@@ -2261,11 +2265,34 @@
tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
- tinfo->curr.transport_version = 2;
- tinfo->goal.transport_version = 2;
- tinfo->goal.ppr_options = 0;
- ahd_qinfifo_requeue_tail(ahd, scb);
- printerror = 0;
+ if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) {
+ ahd_set_width(ahd, &devinfo,
+ MSG_EXT_WDTR_BUS_8_BIT,
+ AHD_TRANS_CUR,
+ /*paused*/TRUE);
+ ahd_set_syncrate(ahd, &devinfo,
+ /*period*/0, /*offset*/0,
+ /*ppr_options*/0,
+ AHD_TRANS_CUR,
+ /*paused*/TRUE);
+ /*
+ * The expect PPR busfree handler below
+ * will effect the retry and necessary
+ * abort.
+ */
+ } else {
+ tinfo->curr.transport_version = 2;
+ tinfo->goal.transport_version = 2;
+ tinfo->goal.ppr_options = 0;
+ /*
+ * Remove any SCBs in the waiting for selection
+ * queue that may also be for this target so
+ * that command ordering is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
+ ahd_qinfifo_requeue_tail(ahd, scb);
+ printerror = 0;
+ }
} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
&& ppr_busfree == 0) {
/*
@@ -2280,6 +2307,12 @@
MSG_EXT_WDTR_BUS_8_BIT,
AHD_TRANS_CUR|AHD_TRANS_GOAL,
/*paused*/TRUE);
+ /*
+ * Remove any SCBs in the waiting for selection
+ * queue that may also be for this target so that
+ * command ordering is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
ahd_qinfifo_requeue_tail(ahd, scb);
printerror = 0;
} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
@@ -2297,6 +2330,12 @@
/*ppr_options*/0,
AHD_TRANS_CUR|AHD_TRANS_GOAL,
/*paused*/TRUE);
+ /*
+ * Remove any SCBs in the waiting for selection
+ * queue that may also be for this target so that
+ * command ordering is preserved.
+ */
+ ahd_freeze_devq(ahd, scb);
ahd_qinfifo_requeue_tail(ahd, scb);
printerror = 0;
} else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
@@ -2369,14 +2408,14 @@
*/
printf("%s: ", ahd_name(ahd));
}
- if (lastphase != P_BUSFREE)
- ahd_force_renegotiation(ahd, &devinfo);
printf("Unexpected busfree %s, %d SCBs aborted, "
"PRGMCNT == 0x%x\n",
ahd_lookup_phase_entry(lastphase)->phasemsg,
aborted,
ahd_inw(ahd, PRGMCNT));
ahd_dump_card_state(ahd);
+ if (lastphase != P_BUSFREE)
+ ahd_force_renegotiation(ahd, &devinfo);
}
/* Always restart the sequencer. */
return (1);
@@ -3293,6 +3332,15 @@
con_opts |= WIDEXFER;
/*
+ * Slow down our CRC interval to be
+ * compatible with packetized U320 devices
+ * that can't handle a CRC at full speed
+ */
+ if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
+ con_opts |= ENSLOWCRC;
+ }
+
+ /*
* During packetized transfers, the target will
* give us the oportunity to send command packets
* without us asserting attention.
@@ -3315,7 +3363,6 @@
{
struct scb *pending_scb;
int pending_scb_count;
- u_int scb_tag;
int paused;
u_int saved_scbptr;
ahd_mode_state saved_modes;
@@ -3333,7 +3380,6 @@
pending_scb_count = 0;
LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
struct ahd_devinfo devinfo;
- struct hardware_scb *pending_hscb;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
@@ -3341,11 +3387,10 @@
tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
- pending_hscb = pending_scb->hscb;
if ((tstate->auto_negotiate & devinfo.target_mask) == 0
&& (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
- pending_hscb->control &= ~MK_MESSAGE;
+ pending_scb->hscb->control &= ~MK_MESSAGE;
}
ahd_sync_scb(ahd, pending_scb,
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
@@ -3377,18 +3422,15 @@
ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
saved_scbptr = ahd_get_scbptr(ahd);
/* Ensure that the hscbs down on the card match the new information */
- for (scb_tag = 0; scb_tag < ahd->scb_data.maxhscbs; scb_tag++) {
- struct hardware_scb *pending_hscb;
+ LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
+ u_int scb_tag;
u_int control;
- pending_scb = ahd_lookup_scb(ahd, scb_tag);
- if (pending_scb == NULL)
- continue;
+ scb_tag = SCB_GET_TAG(pending_scb);
ahd_set_scbptr(ahd, scb_tag);
- pending_hscb = pending_scb->hscb;
control = ahd_inb_scbram(ahd, SCB_CONTROL);
control &= ~MK_MESSAGE;
- control |= pending_hscb->control & MK_MESSAGE;
+ control |= pending_scb->hscb->control & MK_MESSAGE;
ahd_outb(ahd, SCB_CONTROL, control);
}
ahd_set_scbptr(ahd, saved_scbptr);
@@ -6500,13 +6542,14 @@
| ENLQIOVERI_LQ|ENLQIOVERI_NLQ);
ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC);
/*
- * An interrupt from LQOBUSFREE is made redundant by the
- * BUSFREE interrupt. We choose to have the sequencer catch
- * LQOPHCHGINPKT errors manually for the command phase at the
- * start of a packetized selection case.
- ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE|ENLQOPHACHGINPKT);
+ * We choose to have the sequencer catch LQOPHCHGINPKT errors
+ * manually for the command phase at the start of a packetized
+ * selection case. ENLQOBUSFREE should be made redundant by
+ * the BUSFREE interrupt, but it seems that some LQOBUSFREE
+ * events fail to assert the BUSFREE interrupt so we must
+ * also enable LQOBUSFREE interrupts.
*/
- ahd_outb(ahd, LQOMODE1, 0);
+ ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE);
/*
* Setup sequencer interrupt handlers.
@@ -6617,6 +6660,8 @@
/* We don't have any waiting selections */
ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL);
ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL);
+ ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL);
+ ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF);
for (i = 0; i < AHD_NUM_TARGETS; i++)
ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL);
@@ -6704,6 +6749,18 @@
ahd_loadseq(ahd);
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+
+ if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
+ u_int negodat3 = ahd_inb(ahd, NEGCONOPTS);
+
+ negodat3 |= ENSLOWCRC;
+ ahd_outb(ahd, NEGCONOPTS, negodat3);
+ negodat3 = ahd_inb(ahd, NEGCONOPTS);
+ if (!(negodat3 & ENSLOWCRC))
+ printf("aic79xx: failed to set the SLOWCRC bit\n");
+ else
+ printf("aic79xx: SLOWCRC bit set\n");
+ }
}
/*
@@ -7260,12 +7317,28 @@
ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
}
+void
+ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status)
+{
+ cam_status ostat;
+ cam_status cstat;
+
+ ostat = ahd_get_transaction_status(scb);
+ if (ostat == CAM_REQ_INPROG)
+ ahd_set_transaction_status(scb, status);
+ cstat = ahd_get_transaction_status(scb);
+ if (cstat != CAM_REQ_CMP)
+ ahd_freeze_scb(scb);
+ ahd_done(ahd, scb);
+}
+
int
ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status,
ahd_search_action action)
{
struct scb *scb;
+ struct scb *mk_msg_scb;
struct scb *prev_scb;
ahd_mode_state saved_modes;
u_int qinstart;
@@ -7274,6 +7347,7 @@
u_int tid_next;
u_int tid_prev;
u_int scbid;
+ u_int seq_flags2;
u_int savedscbptr;
uint32_t busaddr;
int found;
@@ -7329,23 +7403,10 @@
found++;
switch (action) {
case SEARCH_COMPLETE:
- {
- cam_status ostat;
- cam_status cstat;
-
- ostat = ahd_get_transaction_status(scb);
- if (ostat == CAM_REQ_INPROG)
- ahd_set_transaction_status(scb,
- status);
- cstat = ahd_get_transaction_status(scb);
- if (cstat != CAM_REQ_CMP)
- ahd_freeze_scb(scb);
if ((scb->flags & SCB_ACTIVE) == 0)
printf("Inactive SCB in qinfifo\n");
- ahd_done(ahd, scb);
-
+ ahd_done_with_status(ahd, scb, status);
/* FALLTHROUGH */
- }
case SEARCH_REMOVE:
break;
case SEARCH_PRINT:
@@ -7375,21 +7436,24 @@
* looking for matches.
*/
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+ seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2);
+ if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) {
+ scbid = ahd_inw(ahd, MK_MESSAGE_SCB);
+ mk_msg_scb = ahd_lookup_scb(ahd, scbid);
+ } else
+ mk_msg_scb = NULL;
savedscbptr = ahd_get_scbptr(ahd);
tid_next = ahd_inw(ahd, WAITING_TID_HEAD);
tid_prev = SCB_LIST_NULL;
targets = 0;
for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) {
u_int tid_head;
+ u_int tid_tail;
- /*
- * We limit based on the number of SCBs since
- * MK_MESSAGE SCBs are not in the per-tid lists.
- */
targets++;
- if (targets > AHD_SCB_MAX) {
+ if (targets > AHD_NUM_TARGETS)
panic("TID LIST LOOP");
- }
+
if (scbid >= ahd->scb_data.numscbs) {
printf("%s: Waiting TID List inconsistency. "
"SCB index == 0x%x, yet numscbs == 0x%x.",
@@ -7419,8 +7483,71 @@
tid_head = scbid;
found += ahd_search_scb_list(ahd, target, channel,
lun, tag, role, status,
- action, &tid_head,
+ action, &tid_head, &tid_tail,
SCB_GET_TARGET(ahd, scb));
+ /*
+ * Check any MK_MESSAGE SCB that is still waiting to
+ * enter this target's waiting for selection queue.
+ */
+ if (mk_msg_scb != NULL
+ && ahd_match_scb(ahd, mk_msg_scb, target, channel,
+ lun, tag, role)) {
+
+ /*
+ * We found an scb that needs to be acted on.
+ */
+ found++;
+ switch (action) {
+ case SEARCH_COMPLETE:
+ if ((mk_msg_scb->flags & SCB_ACTIVE) == 0)
+ printf("Inactive SCB pending MK_MSG\n");
+ ahd_done_with_status(ahd, mk_msg_scb, status);
+ /* FALLTHROUGH */
+ case SEARCH_REMOVE:
+ {
+ u_int tail_offset;
+
+ printf("Removing MK_MSG scb\n");
+
+ /*
+ * Reset our tail to the tail of the
+ * main per-target list.
+ */
+ tail_offset = WAITING_SCB_TAILS
+ + (2 * SCB_GET_TARGET(ahd, mk_msg_scb));
+ ahd_outw(ahd, tail_offset, tid_tail);
+
+ seq_flags2 &= ~PENDING_MK_MESSAGE;
+ ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
+ ahd_outw(ahd, CMDS_PENDING,
+ ahd_inw(ahd, CMDS_PENDING)-1);
+ mk_msg_scb = NULL;
+ break;
+ }
+ case SEARCH_PRINT:
+ printf(" 0x%x", SCB_GET_TAG(scb));
+ /* FALLTHROUGH */
+ case SEARCH_COUNT:
+ break;
+ }
+ }
+
+ if (mk_msg_scb != NULL
+ && SCBID_IS_NULL(tid_head)
+ && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
+ SCB_LIST_NULL, ROLE_UNKNOWN)) {
+
+ /*
+ * When removing the last SCB for a target
+ * queue with a pending MK_MESSAGE scb, we
+ * must queue the MK_MESSAGE scb.
+ */
+ printf("Queueing mk_msg_scb\n");
+ tid_head = ahd_inw(ahd, MK_MESSAGE_SCB);
+ seq_flags2 &= ~PENDING_MK_MESSAGE;
+ ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
+ mk_msg_scb = NULL;
+ }
if (tid_head != scbid)
ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next);
if (!SCBID_IS_NULL(tid_head))
@@ -7428,6 +7555,8 @@
if (action == SEARCH_PRINT)
printf(")\n");
}
+
+ /* Restore saved state. */
ahd_set_scbptr(ahd, savedscbptr);
ahd_restore_modes(ahd, saved_modes);
return (found);
@@ -7436,7 +7565,8 @@
static int
ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status,
- ahd_search_action action, u_int *list_head, u_int tid)
+ ahd_search_action action, u_int *list_head,
+ u_int *list_tail, u_int tid)
{
struct scb *scb;
u_int scbid;
@@ -7448,6 +7578,7 @@
found = 0;
prev = SCB_LIST_NULL;
next = *list_head;
+ *list_tail = SCB_LIST_NULL;
for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) {
if (scbid >= ahd->scb_data.numscbs) {
printf("%s:SCB List inconsistency. "
@@ -7463,6 +7594,7 @@
panic("Waiting List traversal\n");
}
ahd_set_scbptr(ahd, scbid);
+ *list_tail = scbid;
next = ahd_inw_scbram(ahd, SCB_NEXT);
if (ahd_match_scb(ahd, scb, target, channel,
lun, SCB_LIST_NULL, role) == 0) {
@@ -7472,24 +7604,14 @@
found++;
switch (action) {
case SEARCH_COMPLETE:
- {
- cam_status ostat;
- cam_status cstat;
-
- ostat = ahd_get_transaction_status(scb);
- if (ostat == CAM_REQ_INPROG)
- ahd_set_transaction_status(scb, status);
- cstat = ahd_get_transaction_status(scb);
- if (cstat != CAM_REQ_CMP)
- ahd_freeze_scb(scb);
if ((scb->flags & SCB_ACTIVE) == 0)
printf("Inactive SCB in Waiting List\n");
- ahd_done(ahd, scb);
+ ahd_done_with_status(ahd, scb, status);
/* FALLTHROUGH */
- }
case SEARCH_REMOVE:
ahd_rem_wscb(ahd, scbid, prev, next, tid);
- if (prev == SCB_LIST_NULL)
+ *list_tail = prev;
+ if (SCBID_IS_NULL(prev))
*list_head = next;
break;
case SEARCH_PRINT:
@@ -7558,14 +7680,17 @@
}
/*
- * SCBs that had MK_MESSAGE set in them will not
- * be queued to the per-target lists, so don't
- * blindly clear the tail pointer.
+ * SCBs that have MK_MESSAGE set in them may
+ * cause the tail pointer to be updated without
+ * setting the next pointer of the previous tail.
+ * Only clear the tail if the removed SCB was
+ * the tail.
*/
tail_offset = WAITING_SCB_TAILS + (2 * tid);
if (SCBID_IS_NULL(next)
&& ahd_inw(ahd, tail_offset) == scbid)
ahd_outw(ahd, tail_offset, prev);
+
ahd_add_scb_to_free_list(ahd, scbid);
return (next);
}
@@ -8148,11 +8273,6 @@
ahd_setup_data_scb(ahd, scb);
scb->flags |= SCB_SENSE;
ahd_queue_scb(ahd, scb);
- /*
- * Ensure we have enough time to actually
- * retrieve the sense.
- */
- ahd_scb_timer_reset(scb, 5 * 1000000);
break;
}
case SCSI_STATUS_OK:
@@ -8793,6 +8913,9 @@
* Mode independent registers.
*/
cur_col = 0;
+ ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50);
+ ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50);
+ ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50);
ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50);
ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50);
ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50);
@@ -8808,6 +8931,12 @@
ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50);
ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50);
ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50);
+ ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50);
+ ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT),
+ &cur_col, 50);
+ ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50);
+ ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID),
+ &cur_col, 50);
ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50);
ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50);
ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50);
@@ -8915,7 +9044,7 @@
ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
fifo_scbptr = ahd_get_scbptr(ahd);
- printf("\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
+ printf("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
ahd_name(ahd), i,
(dffstat & (FIFO0FREE << i)) ? "Free" : "Active",
ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr);
@@ -8970,6 +9099,9 @@
printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n",
ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT),
ahd_inb(ahd, MAXCMDCNT));
+ printf("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n",
+ ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID),
+ ahd_inb(ahd, SAVED_LUN));
ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50);
printf("\n");
ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
diff --git a/drivers/scsi/aic7xxx/aic79xx_inline.h b/drivers/scsi/aic7xxx/aic79xx_inline.h
index 91c4f7f..8ad3ce9 100644
--- a/drivers/scsi/aic7xxx/aic79xx_inline.h
+++ b/drivers/scsi/aic7xxx/aic79xx_inline.h
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx_inline.h#58 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_inline.h#59 $
*
* $FreeBSD$
*/
@@ -804,9 +804,10 @@
uint64_t host_dataptr;
host_dataptr = ahd_le64toh(scb->hscb->dataptr);
- printf("%s: Queueing SCB 0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
+ printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
ahd_name(ahd),
- SCB_GET_TAG(scb), ahd_le32toh(scb->hscb->hscb_busaddr),
+ SCB_GET_TAG(scb), scb->hscb->scsiid,
+ ahd_le32toh(scb->hscb->hscb_busaddr),
(u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
(u_int)(host_dataptr & 0xFFFFFFFF),
ahd_le32toh(scb->hscb->datacnt));
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 2567e29..7254ea5 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -314,6 +314,21 @@
*/
uint32_t aic79xx_periodic_otag;
+/* Some storage boxes are using an LSI chip which has a bug making it
+ * impossible to use aic79xx Rev B chip in 320 speeds. The following
+ * storage boxes have been reported to be buggy:
+ * EonStor 3U 16-Bay: U16U-G3A3
+ * EonStor 2U 12-Bay: U12U-G3A3
+ * SentinelRAID: 2500F R5 / R6
+ * SentinelRAID: 2500F R1
+ * SentinelRAID: 2500F/1500F
+ * SentinelRAID: 150F
+ *
+ * To get around this LSI bug, you can set your board to 160 mode
+ * or you can enable the SLOWCRC bit.
+ */
+uint32_t aic79xx_slowcrc;
+
/*
* Module information and settable options.
*/
@@ -343,6 +358,7 @@
" amplitude:<int> Set the signal amplitude (0-7).\n"
" seltime:<int> Selection Timeout:\n"
" (0/256ms,1/128ms,2/64ms,3/32ms)\n"
+" slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
"\n"
" Sample /etc/modprobe.conf line:\n"
" Enable verbose logging\n"
@@ -1003,6 +1019,7 @@
{ "slewrate", NULL },
{ "precomp", NULL },
{ "amplitude", NULL },
+ { "slowcrc", &aic79xx_slowcrc },
};
end = strchr(s, '\0');
@@ -1072,7 +1089,6 @@
return (ENOMEM);
*((struct ahd_softc **)host->hostdata) = ahd;
- ahd_lock(ahd, &s);
ahd->platform_data->host = host;
host->can_queue = AHD_MAX_QUEUE;
host->cmd_per_lun = 2;
@@ -1083,7 +1099,9 @@
host->max_lun = AHD_NUM_LUNS;
host->max_channel = 0;
host->sg_tablesize = AHD_NSEG;
+ ahd_lock(ahd, &s);
ahd_set_unit(ahd, ahd_linux_unit++);
+ ahd_unlock(ahd, &s);
sprintf(buf, "scsi%d", host->host_no);
new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
if (new_name != NULL) {
@@ -1093,7 +1111,6 @@
host->unique_id = ahd->unit;
ahd_linux_initialize_scsi_bus(ahd);
ahd_intr_enable(ahd, TRUE);
- ahd_unlock(ahd, &s);
host->transportt = ahd_linux_transport_template;
@@ -1127,6 +1144,7 @@
{
u_int target_id;
u_int numtarg;
+ unsigned long s;
target_id = 0;
numtarg = 0;
@@ -1139,6 +1157,8 @@
else
numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
+ ahd_lock(ahd, &s);
+
/*
* Force negotiation to async for all targets that
* will not see an initial bus reset.
@@ -1155,16 +1175,12 @@
ahd_update_neg_request(ahd, &devinfo, tstate,
tinfo, AHD_NEG_ALWAYS);
}
+ ahd_unlock(ahd, &s);
/* Give the bus some time to recover */
if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
ahd_freeze_simq(ahd);
- init_timer(&ahd->platform_data->reset_timer);
- ahd->platform_data->reset_timer.data = (u_long)ahd;
- ahd->platform_data->reset_timer.expires =
- jiffies + (AIC79XX_RESET_DELAY * HZ)/1000;
- ahd->platform_data->reset_timer.function =
- (ahd_linux_callback_t *)ahd_release_simq;
- add_timer(&ahd->platform_data->reset_timer);
+ msleep(AIC79XX_RESET_DELAY);
+ ahd_release_simq(ahd);
}
}
@@ -2033,6 +2049,9 @@
void
ahd_freeze_simq(struct ahd_softc *ahd)
{
+ unsigned long s;
+
+ ahd_lock(ahd, &s);
ahd->platform_data->qfrozen++;
if (ahd->platform_data->qfrozen == 1) {
scsi_block_requests(ahd->platform_data->host);
@@ -2040,6 +2059,7 @@
CAM_LUN_WILDCARD, SCB_LIST_NULL,
ROLE_INITIATOR, CAM_REQUEUE_REQ);
}
+ ahd_unlock(ahd, &s);
}
void
@@ -2344,8 +2364,9 @@
ahd_name(ahd), dev->active);
retval = FAILED;
}
- }
- ahd_unlock(ahd, &flags);
+ } else
+ ahd_unlock(ahd, &flags);
+
return (retval);
}
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h
index cb74fcc..9cb1013 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.h
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.h
@@ -36,7 +36,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.h#137 $
+ * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.h#166 $
*
*/
#ifndef _AIC79XX_LINUX_H_
@@ -228,7 +228,6 @@
typedef void ahd_linux_callback_t (u_long);
static __inline void ahd_timer_reset(ahd_timer_t *timer, int usec,
ahd_callback_t *func, void *arg);
-static __inline void ahd_scb_timer_reset(struct scb *scb, u_int usec);
static __inline void
ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
@@ -243,12 +242,6 @@
add_timer(timer);
}
-static __inline void
-ahd_scb_timer_reset(struct scb *scb, u_int usec)
-{
- mod_timer(&scb->io_ctx->eh_timeout, jiffies + (usec * HZ)/1000000);
-}
-
/***************************** SMP support ************************************/
#include <linux/spinlock.h>
@@ -389,7 +382,6 @@
spinlock_t spin_lock;
u_int qfrozen;
- struct timer_list reset_timer;
struct semaphore eh_sem;
struct Scsi_Host *host; /* pointer to scsi host */
#define AHD_LINUX_NOIRQ ((uint32_t)~0)
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
index bf360ae..ebbf7e4 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
@@ -220,10 +220,10 @@
*base2 = pci_resource_start(ahd->dev_softc, 3);
if (*base == 0 || *base2 == 0)
return (ENOMEM);
- if (request_region(*base, 256, "aic79xx") == 0)
+ if (!request_region(*base, 256, "aic79xx"))
return (ENOMEM);
- if (request_region(*base2, 256, "aic79xx") == 0) {
- release_region(*base2, 256);
+ if (!request_region(*base2, 256, "aic79xx")) {
+ release_region(*base, 256);
return (ENOMEM);
}
return (0);
@@ -237,7 +237,7 @@
u_long start;
u_long base_page;
u_long base_offset;
- int error;
+ int error = 0;
if (aic79xx_allow_memio == 0)
return (ENOMEM);
@@ -245,16 +245,15 @@
if ((ahd->bugs & AHD_PCIX_MMAPIO_BUG) != 0)
return (ENOMEM);
- error = 0;
start = pci_resource_start(ahd->dev_softc, 1);
base_page = start & PAGE_MASK;
base_offset = start - base_page;
if (start != 0) {
*bus_addr = start;
- if (request_mem_region(start, 0x1000, "aic79xx") == 0)
+ if (!request_mem_region(start, 0x1000, "aic79xx"))
error = ENOMEM;
- if (error == 0) {
- *maddr = ioremap_nocache(base_page, base_offset + 256);
+ if (!error) {
+ *maddr = ioremap_nocache(base_page, base_offset + 512);
if (*maddr == NULL) {
error = ENOMEM;
release_mem_region(start, 0x1000);
@@ -344,7 +343,7 @@
error = request_irq(ahd->dev_softc->irq, ahd_linux_isr,
SA_SHIRQ, "aic79xx", ahd);
- if (error == 0)
+ if (!error)
ahd->platform_data->irq = ahd->dev_softc->irq;
return (-error);
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index 196a634..757242e5 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#89 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#92 $
*/
#ifdef __linux__
@@ -950,12 +950,19 @@
if ((ahd->flags & AHD_HP_BOARD) == 0)
AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVA);
} else {
+ /* This is revision B and newer. */
+ extern uint32_t aic79xx_slowcrc;
u_int devconfig1;
ahd->features |= AHD_RTI|AHD_NEW_IOCELL_OPTS
- | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY;
+ | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY
+ | AHD_BUSFREEREV_BUG;
ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;
+ /* If the user requested the the SLOWCRC bit to be set. */
+ if (aic79xx_slowcrc)
+ ahd->features |= AHD_AIC79XXB_SLOWCRC;
+
/*
* Some issues have been resolved in the 7901B.
*/
diff --git a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
index 8763b15..2068e00 100644
--- a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
@@ -2,8 +2,8 @@
* DO NOT EDIT - This file is automatically generated
* from the following source files:
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#119 $
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#76 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $
*/
typedef int (ahd_reg_print_t)(u_int, u_int *, u_int);
typedef struct ahd_reg_parse_entry {
@@ -2204,6 +2204,20 @@
#endif
#if AIC_DEBUG_REGISTERS
+ahd_reg_print_t ahd_mk_message_scb_print;
+#else
+#define ahd_mk_message_scb_print(regvalue, cur_col, wrap) \
+ ahd_print_register(NULL, 0, "MK_MESSAGE_SCB", 0x160, regvalue, cur_col, wrap)
+#endif
+
+#if AIC_DEBUG_REGISTERS
+ahd_reg_print_t ahd_mk_message_scsiid_print;
+#else
+#define ahd_mk_message_scsiid_print(regvalue, cur_col, wrap) \
+ ahd_print_register(NULL, 0, "MK_MESSAGE_SCSIID", 0x162, regvalue, cur_col, wrap)
+#endif
+
+#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_scb_base_print;
#else
#define ahd_scb_base_print(regvalue, cur_col, wrap) \
@@ -3638,6 +3652,7 @@
#define SEQ_FLAGS2 0x14d
#define SELECTOUT_QFROZEN 0x04
#define TARGET_MSG_PENDING 0x02
+#define PENDING_MK_MESSAGE 0x01
#define ALLOCFIFO_SCBPTR 0x14e
@@ -3655,6 +3670,10 @@
#define CMDSIZE_TABLE 0x158
+#define MK_MESSAGE_SCB 0x160
+
+#define MK_MESSAGE_SCSIID 0x162
+
#define SCB_BASE 0x180
#define SCB_RESIDUAL_DATACNT 0x180
@@ -3800,5 +3819,5 @@
/* Exported Labels */
-#define LABEL_seq_isr 0x285
-#define LABEL_timer_isr 0x281
+#define LABEL_seq_isr 0x28f
+#define LABEL_timer_isr 0x28b
diff --git a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
index a4137c9..db38a61 100644
--- a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
@@ -2,8 +2,8 @@
* DO NOT EDIT - This file is automatically generated
* from the following source files:
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#118 $
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#75 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $
*/
#include "aic79xx_osm.h"
@@ -3382,6 +3382,7 @@
}
static ahd_reg_parse_entry_t SEQ_FLAGS2_parse_table[] = {
+ { "PENDING_MK_MESSAGE", 0x01, 0x01 },
{ "TARGET_MSG_PENDING", 0x02, 0x02 },
{ "SELECTOUT_QFROZEN", 0x04, 0x04 }
};
@@ -3389,7 +3390,7 @@
int
ahd_seq_flags2_print(u_int regvalue, u_int *cur_col, u_int wrap)
{
- return (ahd_print_register(SEQ_FLAGS2_parse_table, 2, "SEQ_FLAGS2",
+ return (ahd_print_register(SEQ_FLAGS2_parse_table, 3, "SEQ_FLAGS2",
0x14d, regvalue, cur_col, wrap));
}
@@ -3450,6 +3451,20 @@
}
int
+ahd_mk_message_scb_print(u_int regvalue, u_int *cur_col, u_int wrap)
+{
+ return (ahd_print_register(NULL, 0, "MK_MESSAGE_SCB",
+ 0x160, regvalue, cur_col, wrap));
+}
+
+int
+ahd_mk_message_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap)
+{
+ return (ahd_print_register(NULL, 0, "MK_MESSAGE_SCSIID",
+ 0x162, regvalue, cur_col, wrap));
+}
+
+int
ahd_scb_base_print(u_int regvalue, u_int *cur_col, u_int wrap)
{
return (ahd_print_register(NULL, 0, "SCB_BASE",
diff --git a/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped b/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
index b1e5365..11bed07 100644
--- a/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_seq.h_shipped
@@ -2,17 +2,17 @@
* DO NOT EDIT - This file is automatically generated
* from the following source files:
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#119 $
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#76 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.seq#120 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $
*/
static uint8_t seqprog[] = {
0xff, 0x02, 0x06, 0x78,
- 0x00, 0xea, 0x64, 0x59,
+ 0x00, 0xea, 0x6e, 0x59,
0x01, 0xea, 0x04, 0x30,
0xff, 0x04, 0x0c, 0x78,
- 0x19, 0xea, 0x64, 0x59,
+ 0x19, 0xea, 0x6e, 0x59,
0x19, 0xea, 0x04, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x60, 0x3a, 0x3a, 0x68,
0x04, 0x4d, 0x35, 0x78,
@@ -33,15 +33,15 @@
0xff, 0xea, 0x62, 0x02,
0x00, 0xe2, 0x3a, 0x40,
0xff, 0x21, 0x3b, 0x70,
- 0x40, 0x4b, 0xaa, 0x69,
- 0x00, 0xe2, 0x68, 0x59,
- 0x40, 0x4b, 0xaa, 0x69,
- 0x20, 0x4b, 0x96, 0x69,
+ 0x40, 0x4b, 0xb4, 0x69,
+ 0x00, 0xe2, 0x72, 0x59,
+ 0x40, 0x4b, 0xb4, 0x69,
+ 0x20, 0x4b, 0xa0, 0x69,
0xfc, 0x42, 0x44, 0x78,
0x10, 0x40, 0x44, 0x78,
- 0x00, 0xe2, 0xfc, 0x5d,
+ 0x00, 0xe2, 0x10, 0x5e,
0x20, 0x4d, 0x48, 0x78,
- 0x00, 0xe2, 0xfc, 0x5d,
+ 0x00, 0xe2, 0x10, 0x5e,
0x30, 0x3f, 0xc0, 0x09,
0x30, 0xe0, 0x50, 0x60,
0x7f, 0x4a, 0x94, 0x08,
@@ -51,7 +51,7 @@
0x00, 0xe2, 0x76, 0x58,
0x00, 0xe2, 0x86, 0x58,
0x00, 0xe2, 0x06, 0x40,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x01, 0x52, 0x84, 0x78,
0x02, 0x58, 0x50, 0x31,
@@ -59,26 +59,26 @@
0xff, 0x97, 0x6f, 0x78,
0x50, 0x4b, 0x6a, 0x68,
0xbf, 0x3a, 0x74, 0x08,
- 0x14, 0xea, 0x64, 0x59,
+ 0x14, 0xea, 0x6e, 0x59,
0x14, 0xea, 0x04, 0x00,
0x08, 0x92, 0x25, 0x03,
0xff, 0x90, 0x5f, 0x68,
- 0x00, 0xe2, 0x76, 0x5b,
+ 0x00, 0xe2, 0x8a, 0x5b,
0x00, 0xe2, 0x5e, 0x40,
- 0x00, 0xea, 0x5e, 0x59,
+ 0x00, 0xea, 0x68, 0x59,
0x01, 0xea, 0x00, 0x30,
0x80, 0xf9, 0x7e, 0x68,
- 0x00, 0xe2, 0x5c, 0x59,
- 0x11, 0xea, 0x5e, 0x59,
+ 0x00, 0xe2, 0x66, 0x59,
+ 0x11, 0xea, 0x68, 0x59,
0x11, 0xea, 0x00, 0x00,
- 0x80, 0xf9, 0x5c, 0x79,
+ 0x80, 0xf9, 0x66, 0x79,
0xff, 0xea, 0xd4, 0x0d,
- 0x22, 0xea, 0x5e, 0x59,
+ 0x22, 0xea, 0x68, 0x59,
0x22, 0xea, 0x00, 0x00,
0x10, 0x16, 0x90, 0x78,
0x10, 0x16, 0x2c, 0x00,
0x01, 0x0b, 0xae, 0x32,
- 0x18, 0xad, 0x12, 0x79,
+ 0x18, 0xad, 0x1c, 0x79,
0x04, 0xad, 0xdc, 0x68,
0x80, 0xad, 0x84, 0x78,
0x10, 0xad, 0xaa, 0x78,
@@ -118,7 +118,6 @@
0x80, 0x18, 0x30, 0x04,
0x40, 0xad, 0x84, 0x78,
0xe7, 0xad, 0x5a, 0x09,
- 0x02, 0xa8, 0x40, 0x31,
0xff, 0xea, 0xc0, 0x09,
0x01, 0x54, 0xa9, 0x1a,
0x00, 0x55, 0xab, 0x22,
@@ -128,24 +127,30 @@
0xff, 0xea, 0x5a, 0x03,
0xff, 0xea, 0x5e, 0x03,
0x01, 0x10, 0xd4, 0x31,
- 0x10, 0x92, 0x07, 0x69,
+ 0x02, 0xa8, 0x40, 0x31,
+ 0x01, 0x92, 0xc1, 0x31,
0x3d, 0x93, 0xc5, 0x29,
0xfe, 0xe2, 0xc4, 0x09,
0x01, 0xea, 0xc6, 0x01,
0x02, 0xe2, 0xc8, 0x31,
0x02, 0xec, 0x50, 0x31,
0x02, 0xa0, 0xda, 0x31,
- 0xff, 0xa9, 0x06, 0x71,
+ 0xff, 0xa9, 0x10, 0x71,
+ 0x10, 0xe0, 0x0e, 0x79,
+ 0x10, 0x92, 0x0f, 0x79,
+ 0x01, 0x4d, 0x9b, 0x02,
+ 0x02, 0xa0, 0xc0, 0x32,
+ 0x01, 0x93, 0xc5, 0x36,
0x02, 0xa0, 0x58, 0x37,
- 0xff, 0x21, 0x0f, 0x71,
+ 0xff, 0x21, 0x19, 0x71,
0x02, 0x22, 0x51, 0x31,
0x02, 0xa0, 0x5c, 0x33,
0x02, 0xa0, 0x44, 0x36,
0x02, 0xa0, 0x40, 0x32,
0x02, 0xa0, 0x44, 0x36,
- 0x04, 0x4d, 0x17, 0x69,
- 0x40, 0x16, 0x48, 0x69,
- 0xff, 0x2d, 0x4d, 0x61,
+ 0x05, 0x4d, 0x21, 0x69,
+ 0x40, 0x16, 0x52, 0x69,
+ 0xff, 0x2d, 0x57, 0x61,
0xff, 0x29, 0x85, 0x70,
0x02, 0x28, 0x55, 0x32,
0x01, 0xea, 0x5a, 0x01,
@@ -159,22 +164,22 @@
0x01, 0x56, 0xad, 0x1a,
0xff, 0x54, 0xa9, 0x1a,
0xff, 0x55, 0xab, 0x22,
- 0xff, 0x8d, 0x41, 0x71,
- 0x80, 0xac, 0x40, 0x71,
- 0x20, 0x16, 0x40, 0x69,
+ 0xff, 0x8d, 0x4b, 0x71,
+ 0x80, 0xac, 0x4a, 0x71,
+ 0x20, 0x16, 0x4a, 0x69,
0x00, 0xac, 0xc4, 0x19,
- 0x07, 0xe2, 0x40, 0xf9,
+ 0x07, 0xe2, 0x4a, 0xf9,
0x02, 0x8c, 0x51, 0x31,
- 0x00, 0xe2, 0x24, 0x41,
+ 0x00, 0xe2, 0x2e, 0x41,
0x01, 0xac, 0x08, 0x31,
0x09, 0xea, 0x5a, 0x01,
0x02, 0x8c, 0x51, 0x32,
0xff, 0xea, 0x1a, 0x07,
0x04, 0x24, 0xf9, 0x30,
- 0x1d, 0xea, 0x52, 0x41,
+ 0x1d, 0xea, 0x5c, 0x41,
0x02, 0x2c, 0x51, 0x31,
0x04, 0xa8, 0xf9, 0x30,
- 0x19, 0xea, 0x52, 0x41,
+ 0x19, 0xea, 0x5c, 0x41,
0x06, 0xea, 0x08, 0x81,
0x01, 0xe2, 0x5a, 0x35,
0x02, 0xf2, 0xf0, 0x31,
@@ -190,27 +195,27 @@
0x02, 0x20, 0xb9, 0x30,
0x02, 0x20, 0x51, 0x31,
0x4c, 0x93, 0xd7, 0x28,
- 0x10, 0x92, 0x77, 0x79,
+ 0x10, 0x92, 0x81, 0x79,
0x01, 0x6b, 0xc0, 0x30,
0x02, 0x64, 0xc8, 0x00,
0x40, 0x3a, 0x74, 0x04,
0x00, 0xe2, 0x76, 0x58,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x30, 0x3f, 0xc0, 0x09,
- 0x30, 0xe0, 0x78, 0x61,
- 0x20, 0x3f, 0x8e, 0x69,
- 0x10, 0x3f, 0x78, 0x79,
+ 0x30, 0xe0, 0x82, 0x61,
+ 0x20, 0x3f, 0x98, 0x69,
+ 0x10, 0x3f, 0x82, 0x79,
0x02, 0xea, 0x7e, 0x00,
- 0x00, 0xea, 0x5e, 0x59,
+ 0x00, 0xea, 0x68, 0x59,
0x01, 0xea, 0x00, 0x30,
0x02, 0x4e, 0x51, 0x35,
0x01, 0xea, 0x7e, 0x00,
- 0x11, 0xea, 0x5e, 0x59,
+ 0x11, 0xea, 0x68, 0x59,
0x11, 0xea, 0x00, 0x00,
0x02, 0x4e, 0x51, 0x35,
0xc0, 0x4a, 0x94, 0x00,
- 0x04, 0x41, 0x9c, 0x79,
+ 0x04, 0x41, 0xa6, 0x79,
0x08, 0xea, 0x98, 0x00,
0x08, 0x57, 0xae, 0x00,
0x08, 0x3c, 0x78, 0x00,
@@ -218,12 +223,12 @@
0x0f, 0x67, 0xc0, 0x09,
0x00, 0x3a, 0x75, 0x02,
0x20, 0xea, 0x96, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
+ 0x00, 0xe2, 0x28, 0x42,
0xc0, 0x4a, 0x94, 0x00,
- 0x40, 0x3a, 0xc8, 0x69,
+ 0x40, 0x3a, 0xd2, 0x69,
0x02, 0x55, 0x06, 0x68,
- 0x02, 0x56, 0xc8, 0x69,
- 0xff, 0x5b, 0xc8, 0x61,
+ 0x02, 0x56, 0xd2, 0x69,
+ 0xff, 0x5b, 0xd2, 0x61,
0x02, 0x20, 0x51, 0x31,
0x80, 0xea, 0xb2, 0x01,
0x44, 0xea, 0x00, 0x00,
@@ -231,40 +236,45 @@
0x33, 0xea, 0x00, 0x00,
0xff, 0xea, 0xb2, 0x09,
0xff, 0xe0, 0xc0, 0x19,
- 0xff, 0xe0, 0xca, 0x79,
+ 0xff, 0xe0, 0xd4, 0x79,
0x02, 0xac, 0x51, 0x31,
- 0x00, 0xe2, 0xc0, 0x41,
+ 0x00, 0xe2, 0xca, 0x41,
0x02, 0x5e, 0x50, 0x31,
0x02, 0xa8, 0xb8, 0x30,
0x02, 0x5c, 0x50, 0x31,
- 0xff, 0xad, 0xdb, 0x71,
+ 0xff, 0xad, 0xe5, 0x71,
0x02, 0xac, 0x41, 0x31,
0x02, 0x22, 0x51, 0x31,
0x02, 0xa0, 0x5c, 0x33,
0x02, 0xa0, 0x44, 0x32,
- 0x00, 0xe2, 0xe4, 0x41,
- 0x10, 0x92, 0xe5, 0x69,
+ 0x00, 0xe2, 0xf8, 0x41,
+ 0x01, 0x4d, 0xf1, 0x79,
+ 0x01, 0x62, 0xc1, 0x31,
+ 0x00, 0x93, 0xf1, 0x61,
+ 0xfe, 0x4d, 0x9b, 0x0a,
+ 0x02, 0x60, 0x41, 0x31,
+ 0x00, 0xe2, 0xdc, 0x41,
0x3d, 0x93, 0xc9, 0x29,
0x01, 0xe4, 0xc8, 0x01,
0x01, 0xea, 0xca, 0x01,
0xff, 0xea, 0xda, 0x01,
0x02, 0x20, 0x51, 0x31,
0x02, 0xae, 0x41, 0x32,
- 0xff, 0x21, 0xed, 0x61,
+ 0xff, 0x21, 0x01, 0x62,
0xff, 0xea, 0x46, 0x02,
0x02, 0x5c, 0x50, 0x31,
0x40, 0xea, 0x96, 0x00,
- 0x02, 0x56, 0x04, 0x6e,
- 0x01, 0x55, 0x04, 0x6e,
- 0x10, 0x92, 0xf9, 0x79,
- 0x10, 0x40, 0x02, 0x6a,
- 0x01, 0x56, 0x02, 0x7a,
+ 0x02, 0x56, 0x20, 0x6e,
+ 0x01, 0x55, 0x20, 0x6e,
+ 0x10, 0x92, 0x0d, 0x7a,
+ 0x10, 0x40, 0x16, 0x6a,
+ 0x01, 0x56, 0x16, 0x7a,
0xff, 0x97, 0x07, 0x78,
- 0x13, 0xea, 0x64, 0x59,
+ 0x13, 0xea, 0x6e, 0x59,
0x13, 0xea, 0x04, 0x00,
0x00, 0xe2, 0x06, 0x40,
0xbf, 0x3a, 0x74, 0x08,
- 0x04, 0x41, 0x08, 0x7a,
+ 0x04, 0x41, 0x1c, 0x7a,
0x08, 0xea, 0x98, 0x00,
0x08, 0x57, 0xae, 0x00,
0x01, 0x93, 0x75, 0x32,
@@ -272,108 +282,108 @@
0x40, 0xea, 0x72, 0x02,
0x08, 0x3c, 0x78, 0x00,
0x80, 0xea, 0x6e, 0x02,
- 0x00, 0xe2, 0xe2, 0x5b,
+ 0x00, 0xe2, 0xf6, 0x5b,
0x01, 0x3c, 0xc1, 0x31,
- 0x9f, 0xe0, 0x84, 0x7c,
- 0x80, 0xe0, 0x28, 0x72,
- 0xa0, 0xe0, 0x64, 0x72,
- 0xc0, 0xe0, 0x5a, 0x72,
- 0xe0, 0xe0, 0x94, 0x72,
- 0x01, 0xea, 0x64, 0x59,
+ 0x9f, 0xe0, 0x98, 0x7c,
+ 0x80, 0xe0, 0x3c, 0x72,
+ 0xa0, 0xe0, 0x78, 0x72,
+ 0xc0, 0xe0, 0x6e, 0x72,
+ 0xe0, 0xe0, 0xa8, 0x72,
+ 0x01, 0xea, 0x6e, 0x59,
0x01, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
- 0x80, 0x39, 0x2f, 0x7a,
- 0x03, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x80, 0x39, 0x43, 0x7a,
+ 0x03, 0xea, 0x6e, 0x59,
0x03, 0xea, 0x04, 0x00,
- 0xee, 0x00, 0x36, 0x6a,
+ 0xee, 0x00, 0x4a, 0x6a,
0x05, 0xea, 0xb4, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x02, 0xa8, 0x9c, 0x32,
- 0x00, 0xe2, 0x7e, 0x59,
+ 0x00, 0xe2, 0x88, 0x59,
0xef, 0x96, 0xd5, 0x19,
- 0x00, 0xe2, 0x46, 0x52,
+ 0x00, 0xe2, 0x5a, 0x52,
0x09, 0x80, 0xe1, 0x30,
0x02, 0xea, 0x36, 0x00,
0xa8, 0xea, 0x32, 0x00,
- 0x00, 0xe2, 0x4c, 0x42,
+ 0x00, 0xe2, 0x60, 0x42,
0x01, 0x96, 0xd1, 0x30,
0x10, 0x80, 0x89, 0x31,
0x20, 0xea, 0x32, 0x00,
0xbf, 0x39, 0x73, 0x0a,
- 0x10, 0x4c, 0x56, 0x6a,
- 0x20, 0x19, 0x4e, 0x6a,
- 0x20, 0x19, 0x52, 0x6a,
- 0x02, 0x4d, 0x14, 0x6a,
+ 0x10, 0x4c, 0x6a, 0x6a,
+ 0x20, 0x19, 0x62, 0x6a,
+ 0x20, 0x19, 0x66, 0x6a,
+ 0x02, 0x4d, 0x28, 0x6a,
0x40, 0x39, 0x73, 0x02,
- 0x00, 0xe2, 0x14, 0x42,
- 0x80, 0x39, 0xd5, 0x6a,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x80, 0x39, 0xe9, 0x6a,
0x01, 0x44, 0x10, 0x33,
0x08, 0x92, 0x25, 0x03,
- 0x00, 0xe2, 0x14, 0x42,
+ 0x00, 0xe2, 0x28, 0x42,
0x10, 0xea, 0x80, 0x00,
0x01, 0x37, 0xc5, 0x31,
- 0x80, 0xe2, 0x80, 0x62,
- 0x10, 0x92, 0xa5, 0x6a,
+ 0x80, 0xe2, 0x94, 0x62,
+ 0x10, 0x92, 0xb9, 0x6a,
0xc0, 0x94, 0xc5, 0x01,
- 0x40, 0x92, 0x71, 0x6a,
+ 0x40, 0x92, 0x85, 0x6a,
0xbf, 0xe2, 0xc4, 0x09,
- 0x20, 0x92, 0x85, 0x7a,
+ 0x20, 0x92, 0x99, 0x7a,
0x01, 0xe2, 0x88, 0x30,
- 0x00, 0xe2, 0xe2, 0x5b,
- 0xa0, 0x3c, 0x8d, 0x62,
+ 0x00, 0xe2, 0xf6, 0x5b,
+ 0xa0, 0x3c, 0xa1, 0x62,
0x23, 0x92, 0x89, 0x08,
- 0x00, 0xe2, 0xe2, 0x5b,
- 0xa0, 0x3c, 0x8d, 0x62,
- 0x00, 0xa8, 0x84, 0x42,
- 0xff, 0xe2, 0x84, 0x62,
- 0x00, 0xe2, 0xa4, 0x42,
+ 0x00, 0xe2, 0xf6, 0x5b,
+ 0xa0, 0x3c, 0xa1, 0x62,
+ 0x00, 0xa8, 0x98, 0x42,
+ 0xff, 0xe2, 0x98, 0x62,
+ 0x00, 0xe2, 0xb8, 0x42,
0x40, 0xea, 0x98, 0x00,
0x01, 0xe2, 0x88, 0x30,
- 0x00, 0xe2, 0xe2, 0x5b,
- 0xa0, 0x3c, 0x63, 0x72,
+ 0x00, 0xe2, 0xf6, 0x5b,
+ 0xa0, 0x3c, 0x77, 0x72,
0x40, 0xea, 0x98, 0x00,
0x01, 0x37, 0x95, 0x32,
0x08, 0xea, 0x6e, 0x02,
- 0x00, 0xe2, 0x14, 0x42,
- 0xe0, 0xea, 0xfe, 0x5b,
- 0x80, 0xe0, 0xe0, 0x6a,
- 0x04, 0xe0, 0x92, 0x73,
- 0x02, 0xe0, 0xc4, 0x73,
- 0x00, 0xea, 0x3e, 0x73,
- 0x03, 0xe0, 0xd4, 0x73,
- 0x23, 0xe0, 0xb6, 0x72,
- 0x08, 0xe0, 0xdc, 0x72,
- 0x00, 0xe2, 0xe2, 0x5b,
- 0x07, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0xe0, 0xea, 0x12, 0x5c,
+ 0x80, 0xe0, 0xf4, 0x6a,
+ 0x04, 0xe0, 0xa6, 0x73,
+ 0x02, 0xe0, 0xd8, 0x73,
+ 0x00, 0xea, 0x52, 0x73,
+ 0x03, 0xe0, 0xe8, 0x73,
+ 0x23, 0xe0, 0xca, 0x72,
+ 0x08, 0xe0, 0xf0, 0x72,
+ 0x00, 0xe2, 0xf6, 0x5b,
+ 0x07, 0xea, 0x6e, 0x59,
0x07, 0xea, 0x04, 0x00,
- 0x08, 0x48, 0x15, 0x72,
- 0x04, 0x48, 0xb3, 0x62,
+ 0x08, 0x48, 0x29, 0x72,
+ 0x04, 0x48, 0xc7, 0x62,
0x01, 0x49, 0x89, 0x30,
- 0x00, 0xe2, 0xa4, 0x42,
+ 0x00, 0xe2, 0xb8, 0x42,
0x01, 0x44, 0xd4, 0x31,
- 0x00, 0xe2, 0xa4, 0x42,
+ 0x00, 0xe2, 0xb8, 0x42,
0x01, 0x00, 0x6c, 0x32,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x4c, 0x3a, 0xc1, 0x28,
0x01, 0x64, 0xc0, 0x31,
- 0x00, 0x36, 0x5f, 0x59,
+ 0x00, 0x36, 0x69, 0x59,
0x01, 0x36, 0x01, 0x30,
- 0x01, 0xe0, 0xda, 0x7a,
- 0xa0, 0xea, 0xf4, 0x5b,
- 0x01, 0xa0, 0xda, 0x62,
- 0x01, 0x84, 0xcf, 0x7a,
- 0x01, 0x95, 0xdd, 0x6a,
- 0x05, 0xea, 0x64, 0x59,
+ 0x01, 0xe0, 0xee, 0x7a,
+ 0xa0, 0xea, 0x08, 0x5c,
+ 0x01, 0xa0, 0xee, 0x62,
+ 0x01, 0x84, 0xe3, 0x7a,
+ 0x01, 0x95, 0xf1, 0x6a,
+ 0x05, 0xea, 0x6e, 0x59,
0x05, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xdc, 0x42,
- 0x03, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0x03, 0xea, 0x6e, 0x59,
0x03, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xdc, 0x42,
- 0x07, 0xea, 0x06, 0x5c,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0x07, 0xea, 0x1a, 0x5c,
0x01, 0x44, 0xd4, 0x31,
- 0x00, 0xe2, 0x14, 0x42,
+ 0x00, 0xe2, 0x28, 0x42,
0x3f, 0xe0, 0x76, 0x0a,
0xc0, 0x3a, 0xc1, 0x09,
0x00, 0x3b, 0x51, 0x01,
@@ -384,54 +394,54 @@
0x01, 0xea, 0xc6, 0x01,
0x02, 0xe2, 0xc8, 0x31,
0x02, 0xec, 0x40, 0x31,
- 0xff, 0xa1, 0xfc, 0x72,
+ 0xff, 0xa1, 0x10, 0x73,
0x02, 0xe8, 0xda, 0x31,
0x02, 0xa0, 0x50, 0x31,
- 0x00, 0xe2, 0x1e, 0x43,
+ 0x00, 0xe2, 0x32, 0x43,
0x80, 0x39, 0x73, 0x02,
0x01, 0x44, 0xd4, 0x31,
- 0x00, 0xe2, 0xe2, 0x5b,
+ 0x00, 0xe2, 0xf6, 0x5b,
0x01, 0x39, 0x73, 0x02,
- 0xe0, 0x3c, 0x39, 0x63,
+ 0xe0, 0x3c, 0x4d, 0x63,
0x02, 0x39, 0x73, 0x02,
- 0x20, 0x46, 0x32, 0x63,
+ 0x20, 0x46, 0x46, 0x63,
0xff, 0xea, 0x52, 0x09,
- 0xa8, 0xea, 0xf4, 0x5b,
- 0x04, 0x92, 0x19, 0x7b,
+ 0xa8, 0xea, 0x08, 0x5c,
+ 0x04, 0x92, 0x2d, 0x7b,
0x01, 0x3a, 0xc1, 0x31,
- 0x00, 0x93, 0x19, 0x63,
+ 0x00, 0x93, 0x2d, 0x63,
0x01, 0x3b, 0xc1, 0x31,
- 0x00, 0x94, 0x23, 0x73,
+ 0x00, 0x94, 0x37, 0x73,
0x01, 0xa9, 0x52, 0x11,
- 0xff, 0xa9, 0x0e, 0x6b,
- 0x00, 0xe2, 0x32, 0x43,
+ 0xff, 0xa9, 0x22, 0x6b,
+ 0x00, 0xe2, 0x46, 0x43,
0x10, 0x39, 0x73, 0x02,
- 0x04, 0x92, 0x33, 0x7b,
+ 0x04, 0x92, 0x47, 0x7b,
0xfb, 0x92, 0x25, 0x0b,
0xff, 0xea, 0x72, 0x0a,
- 0x01, 0xa4, 0x2d, 0x6b,
+ 0x01, 0xa4, 0x41, 0x6b,
0x02, 0xa8, 0x9c, 0x32,
- 0x00, 0xe2, 0x7e, 0x59,
- 0x10, 0x92, 0xdd, 0x7a,
- 0xff, 0xea, 0x06, 0x5c,
- 0x00, 0xe2, 0xdc, 0x42,
- 0x04, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x88, 0x59,
+ 0x10, 0x92, 0xf1, 0x7a,
+ 0xff, 0xea, 0x1a, 0x5c,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0x04, 0xea, 0x6e, 0x59,
0x04, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xdc, 0x42,
- 0x04, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0x04, 0xea, 0x6e, 0x59,
0x04, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
- 0x08, 0x92, 0xd5, 0x7a,
- 0xc0, 0x39, 0x49, 0x7b,
- 0x80, 0x39, 0xd5, 0x6a,
- 0xff, 0x88, 0x49, 0x6b,
- 0x40, 0x39, 0xd5, 0x6a,
- 0x10, 0x92, 0x4f, 0x7b,
- 0x0a, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x08, 0x92, 0xe9, 0x7a,
+ 0xc0, 0x39, 0x5d, 0x7b,
+ 0x80, 0x39, 0xe9, 0x6a,
+ 0xff, 0x88, 0x5d, 0x6b,
+ 0x40, 0x39, 0xe9, 0x6a,
+ 0x10, 0x92, 0x63, 0x7b,
+ 0x0a, 0xea, 0x6e, 0x59,
0x0a, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x6e, 0x5b,
- 0x00, 0xe2, 0xae, 0x43,
- 0x50, 0x4b, 0x56, 0x6b,
+ 0x00, 0xe2, 0x82, 0x5b,
+ 0x00, 0xe2, 0xc2, 0x43,
+ 0x50, 0x4b, 0x6a, 0x6b,
0xbf, 0x3a, 0x74, 0x08,
0x01, 0xe0, 0xf4, 0x31,
0xff, 0xea, 0xc0, 0x09,
@@ -441,31 +451,31 @@
0x01, 0xfa, 0xc0, 0x35,
0x02, 0xa8, 0x90, 0x32,
0x02, 0xea, 0xb4, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x02, 0x48, 0x51, 0x31,
0xff, 0x90, 0x85, 0x68,
- 0xff, 0x88, 0x7b, 0x6b,
- 0x01, 0xa4, 0x77, 0x6b,
- 0x02, 0xa4, 0x7f, 0x6b,
- 0x01, 0x84, 0x7f, 0x7b,
+ 0xff, 0x88, 0x8f, 0x6b,
+ 0x01, 0xa4, 0x8b, 0x6b,
+ 0x02, 0xa4, 0x93, 0x6b,
+ 0x01, 0x84, 0x93, 0x7b,
0x02, 0x28, 0x19, 0x33,
0x02, 0xa8, 0x50, 0x36,
- 0xff, 0x88, 0x7f, 0x73,
- 0x00, 0xe2, 0x52, 0x5b,
+ 0xff, 0x88, 0x93, 0x73,
+ 0x00, 0xe2, 0x66, 0x5b,
0x02, 0xa8, 0x20, 0x33,
0x04, 0xa4, 0x49, 0x03,
0xff, 0xea, 0x1a, 0x03,
- 0xff, 0x2d, 0x8b, 0x63,
+ 0xff, 0x2d, 0x9f, 0x63,
0x02, 0xa8, 0x58, 0x32,
0x02, 0xa8, 0x5c, 0x36,
0x02, 0xa8, 0x40, 0x31,
0x02, 0x2e, 0x51, 0x31,
0x02, 0xa0, 0x18, 0x33,
0x02, 0xa0, 0x5c, 0x36,
- 0xc0, 0x39, 0xd5, 0x6a,
+ 0xc0, 0x39, 0xe9, 0x6a,
0x04, 0x92, 0x25, 0x03,
- 0x20, 0x92, 0xaf, 0x6b,
+ 0x20, 0x92, 0xc3, 0x6b,
0x02, 0xa8, 0x40, 0x31,
0xc0, 0x3a, 0xc1, 0x09,
0x00, 0x3b, 0x51, 0x01,
@@ -480,60 +490,60 @@
0xf7, 0x57, 0xae, 0x08,
0x08, 0xea, 0x98, 0x00,
0x01, 0x44, 0xd4, 0x31,
- 0xee, 0x00, 0xb8, 0x6b,
+ 0xee, 0x00, 0xcc, 0x6b,
0x02, 0xea, 0xb4, 0x00,
0xc0, 0xea, 0x72, 0x02,
- 0x09, 0x4c, 0xba, 0x7b,
+ 0x09, 0x4c, 0xce, 0x7b,
0x01, 0xea, 0x78, 0x02,
0x08, 0x4c, 0x06, 0x68,
- 0x0b, 0xea, 0x64, 0x59,
+ 0x0b, 0xea, 0x6e, 0x59,
0x0b, 0xea, 0x04, 0x00,
0x01, 0x44, 0xd4, 0x31,
- 0x20, 0x39, 0x15, 0x7a,
- 0x00, 0xe2, 0xcc, 0x5b,
- 0x00, 0xe2, 0x14, 0x42,
- 0x01, 0x84, 0xd1, 0x7b,
+ 0x20, 0x39, 0x29, 0x7a,
+ 0x00, 0xe2, 0xe0, 0x5b,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x01, 0x84, 0xe5, 0x7b,
0x01, 0xa4, 0x49, 0x07,
0x08, 0x60, 0x30, 0x33,
0x08, 0x80, 0x41, 0x37,
0xdf, 0x39, 0x73, 0x0a,
- 0xee, 0x00, 0xde, 0x6b,
+ 0xee, 0x00, 0xf2, 0x6b,
0x05, 0xea, 0xb4, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
- 0x00, 0xe2, 0x7e, 0x59,
- 0x00, 0xe2, 0xdc, 0x42,
- 0xff, 0x42, 0xee, 0x6b,
- 0x01, 0x41, 0xe2, 0x6b,
- 0x02, 0x41, 0xe2, 0x7b,
- 0xff, 0x42, 0xee, 0x6b,
- 0x01, 0x41, 0xe2, 0x6b,
- 0x02, 0x41, 0xe2, 0x7b,
- 0xff, 0x42, 0xee, 0x7b,
- 0x04, 0x4c, 0xe2, 0x6b,
+ 0x00, 0xe2, 0x88, 0x59,
+ 0x00, 0xe2, 0xf0, 0x42,
+ 0xff, 0x42, 0x02, 0x6c,
+ 0x01, 0x41, 0xf6, 0x6b,
+ 0x02, 0x41, 0xf6, 0x7b,
+ 0xff, 0x42, 0x02, 0x6c,
+ 0x01, 0x41, 0xf6, 0x6b,
+ 0x02, 0x41, 0xf6, 0x7b,
+ 0xff, 0x42, 0x02, 0x7c,
+ 0x04, 0x4c, 0xf6, 0x6b,
0xe0, 0x41, 0x78, 0x0e,
0x01, 0x44, 0xd4, 0x31,
- 0xff, 0x42, 0xf6, 0x7b,
- 0x04, 0x4c, 0xf6, 0x6b,
+ 0xff, 0x42, 0x0a, 0x7c,
+ 0x04, 0x4c, 0x0a, 0x6c,
0xe0, 0x41, 0x78, 0x0a,
- 0xe0, 0x3c, 0x15, 0x62,
+ 0xe0, 0x3c, 0x29, 0x62,
0xff, 0xea, 0xca, 0x09,
0x01, 0xe2, 0xc8, 0x31,
0x01, 0x46, 0xda, 0x35,
0x01, 0x44, 0xd4, 0x35,
0x10, 0xea, 0x80, 0x00,
0x01, 0xe2, 0x6e, 0x36,
- 0x04, 0xa6, 0x0e, 0x7c,
+ 0x04, 0xa6, 0x22, 0x7c,
0xff, 0xea, 0x5a, 0x09,
0xff, 0xea, 0x4c, 0x0d,
- 0x01, 0xa6, 0x3a, 0x6c,
+ 0x01, 0xa6, 0x4e, 0x6c,
0x10, 0xad, 0x84, 0x78,
- 0x80, 0xad, 0x32, 0x6c,
+ 0x80, 0xad, 0x46, 0x6c,
0x08, 0xad, 0x84, 0x68,
- 0x20, 0x19, 0x26, 0x7c,
+ 0x20, 0x19, 0x3a, 0x7c,
0x80, 0xea, 0xb2, 0x01,
0x11, 0x00, 0x00, 0x10,
- 0x02, 0xa6, 0x22, 0x7c,
+ 0x02, 0xa6, 0x36, 0x7c,
0xff, 0xea, 0xb2, 0x0d,
0x11, 0x00, 0x00, 0x10,
0xff, 0xea, 0xb2, 0x09,
@@ -561,7 +571,7 @@
0x00, 0x86, 0x0d, 0x23,
0x00, 0x87, 0x0f, 0x23,
0x01, 0x84, 0xc5, 0x31,
- 0x80, 0x83, 0x5d, 0x7c,
+ 0x80, 0x83, 0x71, 0x7c,
0x02, 0xe2, 0xc4, 0x01,
0xff, 0xea, 0x4c, 0x09,
0x01, 0xe2, 0x36, 0x30,
@@ -572,75 +582,75 @@
0xfe, 0xa6, 0x4c, 0x0d,
0x0b, 0x98, 0xe1, 0x30,
0xfd, 0xa4, 0x49, 0x09,
- 0x80, 0xa3, 0x71, 0x7c,
+ 0x80, 0xa3, 0x85, 0x7c,
0x02, 0xa4, 0x48, 0x01,
0x01, 0xa4, 0x36, 0x30,
0xa8, 0xea, 0x32, 0x00,
0xfd, 0xa4, 0x49, 0x0b,
0x05, 0xa3, 0x07, 0x33,
- 0x80, 0x83, 0x7d, 0x6c,
+ 0x80, 0x83, 0x91, 0x6c,
0x02, 0xea, 0x4c, 0x05,
0xff, 0xea, 0x4c, 0x0d,
- 0x00, 0xe2, 0x56, 0x59,
- 0x02, 0xa6, 0x10, 0x6c,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x02, 0xa6, 0x24, 0x6c,
0x80, 0xf9, 0xf2, 0x05,
- 0xc0, 0x39, 0x8b, 0x7c,
- 0x03, 0xea, 0x64, 0x59,
+ 0xc0, 0x39, 0x9f, 0x7c,
+ 0x03, 0xea, 0x6e, 0x59,
0x03, 0xea, 0x04, 0x00,
- 0x20, 0x39, 0xaf, 0x7c,
- 0x01, 0x84, 0x95, 0x6c,
- 0x06, 0xea, 0x64, 0x59,
+ 0x20, 0x39, 0xc3, 0x7c,
+ 0x01, 0x84, 0xa9, 0x6c,
+ 0x06, 0xea, 0x6e, 0x59,
0x06, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xb2, 0x44,
+ 0x00, 0xe2, 0xc6, 0x44,
0x01, 0x00, 0x6c, 0x32,
- 0xee, 0x00, 0x9e, 0x6c,
+ 0xee, 0x00, 0xb2, 0x6c,
0x05, 0xea, 0xb4, 0x00,
- 0x33, 0xea, 0x5e, 0x59,
+ 0x33, 0xea, 0x68, 0x59,
0x33, 0xea, 0x00, 0x00,
0x80, 0x3d, 0x7a, 0x00,
- 0xfc, 0x42, 0xa0, 0x7c,
+ 0xfc, 0x42, 0xb4, 0x7c,
0x7f, 0x3d, 0x7a, 0x08,
- 0x00, 0x36, 0x5f, 0x59,
+ 0x00, 0x36, 0x69, 0x59,
0x01, 0x36, 0x01, 0x30,
- 0x09, 0xea, 0x64, 0x59,
+ 0x09, 0xea, 0x6e, 0x59,
0x09, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
- 0x01, 0xa4, 0x95, 0x6c,
- 0x00, 0xe2, 0x68, 0x5c,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x01, 0xa4, 0xa9, 0x6c,
+ 0x00, 0xe2, 0x7c, 0x5c,
0x20, 0x39, 0x73, 0x02,
0x01, 0x00, 0x6c, 0x32,
- 0x02, 0xa6, 0xba, 0x7c,
- 0x00, 0xe2, 0x7e, 0x5c,
+ 0x02, 0xa6, 0xce, 0x7c,
+ 0x00, 0xe2, 0x92, 0x5c,
0x00, 0xe2, 0x76, 0x58,
0x00, 0xe2, 0x86, 0x58,
0x00, 0xe2, 0x5a, 0x58,
- 0x00, 0x36, 0x5f, 0x59,
+ 0x00, 0x36, 0x69, 0x59,
0x01, 0x36, 0x01, 0x30,
- 0x20, 0x19, 0xba, 0x6c,
- 0x00, 0xe2, 0xea, 0x5c,
- 0x04, 0x19, 0xd4, 0x6c,
+ 0x20, 0x19, 0xce, 0x6c,
+ 0x00, 0xe2, 0xfe, 0x5c,
+ 0x04, 0x19, 0xe8, 0x6c,
0x02, 0x19, 0x32, 0x00,
- 0x01, 0x84, 0xd5, 0x7c,
- 0x01, 0x1b, 0xce, 0x7c,
- 0x01, 0x1a, 0xd4, 0x6c,
- 0x00, 0xe2, 0x84, 0x44,
- 0x80, 0x4b, 0xda, 0x6c,
- 0x01, 0x4c, 0xd6, 0x7c,
- 0x03, 0x42, 0x84, 0x6c,
- 0x00, 0xe2, 0x0a, 0x5c,
+ 0x01, 0x84, 0xe9, 0x7c,
+ 0x01, 0x1b, 0xe2, 0x7c,
+ 0x01, 0x1a, 0xe8, 0x6c,
+ 0x00, 0xe2, 0x98, 0x44,
+ 0x80, 0x4b, 0xee, 0x6c,
+ 0x01, 0x4c, 0xea, 0x7c,
+ 0x03, 0x42, 0x98, 0x6c,
+ 0x00, 0xe2, 0x1e, 0x5c,
0x80, 0xf9, 0xf2, 0x01,
- 0x04, 0x39, 0x15, 0x7a,
- 0x00, 0xe2, 0x14, 0x42,
- 0x08, 0x5d, 0xf2, 0x6c,
+ 0x04, 0x39, 0x29, 0x7a,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x08, 0x5d, 0x06, 0x6d,
0x00, 0xe2, 0x76, 0x58,
- 0x00, 0x36, 0x5f, 0x59,
+ 0x00, 0x36, 0x69, 0x59,
0x01, 0x36, 0x01, 0x30,
- 0x02, 0x1b, 0xe2, 0x7c,
- 0x08, 0x5d, 0xf0, 0x7c,
+ 0x02, 0x1b, 0xf6, 0x7c,
+ 0x08, 0x5d, 0x04, 0x7d,
0x03, 0x68, 0x00, 0x37,
0x01, 0x84, 0x09, 0x07,
- 0x80, 0x1b, 0xfc, 0x7c,
- 0x80, 0x84, 0xfd, 0x6c,
+ 0x80, 0x1b, 0x10, 0x7d,
+ 0x80, 0x84, 0x11, 0x6d,
0xff, 0x85, 0x0b, 0x1b,
0xff, 0x86, 0x0d, 0x23,
0xff, 0x87, 0x0f, 0x23,
@@ -652,161 +662,164 @@
0xf9, 0xd9, 0xb2, 0x0d,
0x01, 0xd9, 0xb2, 0x05,
0x01, 0x52, 0x48, 0x31,
- 0x20, 0xa4, 0x26, 0x7d,
- 0x20, 0x5b, 0x26, 0x7d,
- 0x80, 0xf9, 0x34, 0x7d,
+ 0x20, 0xa4, 0x3a, 0x7d,
+ 0x20, 0x5b, 0x3a, 0x7d,
+ 0x80, 0xf9, 0x48, 0x7d,
0x02, 0xea, 0xb4, 0x00,
0x11, 0x00, 0x00, 0x10,
- 0x04, 0x19, 0x40, 0x7d,
+ 0x04, 0x19, 0x54, 0x7d,
0xdf, 0x19, 0x32, 0x08,
- 0x60, 0x5b, 0x40, 0x6d,
- 0x01, 0x4c, 0x1a, 0x7d,
+ 0x60, 0x5b, 0x54, 0x6d,
+ 0x01, 0x4c, 0x2e, 0x7d,
0x20, 0x19, 0x32, 0x00,
0x01, 0xd9, 0xb2, 0x05,
0x02, 0xea, 0xb4, 0x00,
0x01, 0xd9, 0xb2, 0x05,
- 0x10, 0x5b, 0x38, 0x6d,
- 0x08, 0x5b, 0x42, 0x6d,
- 0x20, 0x5b, 0x32, 0x6d,
- 0x02, 0x5b, 0x62, 0x6d,
- 0x0e, 0xea, 0x64, 0x59,
+ 0x10, 0x5b, 0x4c, 0x6d,
+ 0x08, 0x5b, 0x56, 0x6d,
+ 0x20, 0x5b, 0x46, 0x6d,
+ 0x02, 0x5b, 0x76, 0x6d,
+ 0x0e, 0xea, 0x6e, 0x59,
0x0e, 0xea, 0x04, 0x00,
- 0x80, 0xf9, 0x22, 0x6d,
+ 0x80, 0xf9, 0x36, 0x6d,
0xdf, 0x5c, 0xb8, 0x08,
0x01, 0xd9, 0xb2, 0x05,
- 0x01, 0xa4, 0x1d, 0x6e,
- 0x00, 0xe2, 0x68, 0x5c,
- 0x00, 0xe2, 0x6c, 0x5d,
+ 0x01, 0xa4, 0x37, 0x6e,
+ 0x00, 0xe2, 0x7c, 0x5c,
+ 0x00, 0xe2, 0x80, 0x5d,
0x01, 0x90, 0x21, 0x1b,
0x01, 0xd9, 0xb2, 0x05,
- 0x00, 0xe2, 0x52, 0x5b,
+ 0x00, 0xe2, 0x66, 0x5b,
0xf3, 0x96, 0xd5, 0x19,
- 0x00, 0xe2, 0x50, 0x55,
- 0x80, 0x96, 0x51, 0x6d,
- 0x0f, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x64, 0x55,
+ 0x80, 0x96, 0x65, 0x6d,
+ 0x0f, 0xea, 0x6e, 0x59,
0x0f, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x58, 0x45,
+ 0x00, 0xe2, 0x6c, 0x45,
0x04, 0x8c, 0xe1, 0x30,
0x01, 0xea, 0xf2, 0x00,
0x02, 0xea, 0x36, 0x00,
0xa8, 0xea, 0x32, 0x00,
- 0xff, 0x97, 0x5f, 0x7d,
- 0x14, 0xea, 0x64, 0x59,
+ 0xff, 0x97, 0x73, 0x7d,
+ 0x14, 0xea, 0x6e, 0x59,
0x14, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0xce, 0x5d,
+ 0x00, 0xe2, 0xe2, 0x5d,
0x01, 0xd9, 0xb2, 0x05,
0x09, 0x80, 0xe1, 0x30,
0x02, 0xea, 0x36, 0x00,
0xa8, 0xea, 0x32, 0x00,
- 0x00, 0xe2, 0xc6, 0x5d,
+ 0x00, 0xe2, 0xda, 0x5d,
0x01, 0xd9, 0xb2, 0x05,
- 0x02, 0xa6, 0x7c, 0x7d,
- 0x00, 0xe2, 0x56, 0x59,
- 0x20, 0x5b, 0x8a, 0x6d,
- 0xfc, 0x42, 0x76, 0x7d,
- 0x10, 0x40, 0x78, 0x6d,
- 0x20, 0x4d, 0x7a, 0x7d,
- 0x08, 0x5d, 0x8a, 0x6d,
- 0x02, 0xa6, 0x10, 0x6c,
- 0x00, 0xe2, 0x56, 0x59,
- 0x20, 0x5b, 0x8a, 0x6d,
- 0x01, 0x1b, 0xaa, 0x6d,
- 0xfc, 0x42, 0x86, 0x7d,
- 0x10, 0x40, 0x88, 0x6d,
+ 0x02, 0xa6, 0x90, 0x7d,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x20, 0x5b, 0x9e, 0x6d,
+ 0xfc, 0x42, 0x8a, 0x7d,
+ 0x10, 0x40, 0x8c, 0x6d,
+ 0x20, 0x4d, 0x8e, 0x7d,
+ 0x08, 0x5d, 0x9e, 0x6d,
+ 0x02, 0xa6, 0x24, 0x6c,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x20, 0x5b, 0x9e, 0x6d,
+ 0x01, 0x1b, 0xbe, 0x6d,
+ 0xfc, 0x42, 0x9a, 0x7d,
+ 0x10, 0x40, 0x9c, 0x6d,
0x20, 0x4d, 0x84, 0x78,
0x08, 0x5d, 0x84, 0x78,
0x02, 0x19, 0x32, 0x00,
0x01, 0x5b, 0x40, 0x31,
- 0x00, 0xe2, 0xea, 0x5c,
- 0x00, 0xe2, 0xcc, 0x5b,
+ 0x00, 0xe2, 0xfe, 0x5c,
+ 0x00, 0xe2, 0xe0, 0x5b,
0x20, 0xea, 0xb6, 0x00,
- 0x00, 0xe2, 0x0a, 0x5c,
+ 0x00, 0xe2, 0x1e, 0x5c,
0x20, 0x5c, 0xb8, 0x00,
- 0x04, 0x19, 0xa0, 0x6d,
- 0x01, 0x1a, 0xa0, 0x6d,
- 0x00, 0xe2, 0x56, 0x59,
+ 0x04, 0x19, 0xb4, 0x6d,
+ 0x01, 0x1a, 0xb4, 0x6d,
+ 0x00, 0xe2, 0x60, 0x59,
0x01, 0x1a, 0x84, 0x78,
0x80, 0xf9, 0xf2, 0x01,
- 0x20, 0xa0, 0x04, 0x7e,
+ 0x20, 0xa0, 0x18, 0x7e,
0xff, 0x90, 0x21, 0x1b,
- 0x08, 0x92, 0x63, 0x6b,
+ 0x08, 0x92, 0x77, 0x6b,
0x02, 0xea, 0xb4, 0x04,
0x01, 0xa4, 0x49, 0x03,
- 0x40, 0x5b, 0xba, 0x6d,
- 0x00, 0xe2, 0x56, 0x59,
- 0x40, 0x5b, 0xba, 0x6d,
- 0x04, 0x5d, 0x1e, 0x7e,
- 0x01, 0x1a, 0x1e, 0x7e,
+ 0x40, 0x5b, 0xce, 0x6d,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x40, 0x5b, 0xce, 0x6d,
+ 0x04, 0x5d, 0x38, 0x7e,
+ 0x01, 0x1a, 0x38, 0x7e,
0x20, 0x4d, 0x84, 0x78,
- 0x40, 0x5b, 0x04, 0x7e,
- 0x04, 0x5d, 0x1e, 0x7e,
- 0x01, 0x1a, 0x1e, 0x7e,
+ 0x40, 0x5b, 0x18, 0x7e,
+ 0x04, 0x5d, 0x38, 0x7e,
+ 0x01, 0x1a, 0x38, 0x7e,
0x80, 0xf9, 0xf2, 0x01,
0xff, 0x90, 0x21, 0x1b,
- 0x08, 0x92, 0x63, 0x6b,
+ 0x08, 0x92, 0x77, 0x6b,
0x02, 0xea, 0xb4, 0x04,
- 0x00, 0xe2, 0x56, 0x59,
+ 0x00, 0xe2, 0x60, 0x59,
0x01, 0x1b, 0x84, 0x78,
0x80, 0xf9, 0xf2, 0x01,
0x02, 0xea, 0xb4, 0x04,
- 0x00, 0xe2, 0x56, 0x59,
- 0x01, 0x1b, 0xe2, 0x6d,
- 0x40, 0x5b, 0xf0, 0x7d,
- 0x01, 0x1b, 0xe2, 0x6d,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x01, 0x1b, 0xf6, 0x6d,
+ 0x40, 0x5b, 0x04, 0x7e,
+ 0x01, 0x1b, 0xf6, 0x6d,
0x02, 0x19, 0x32, 0x00,
0x01, 0x1a, 0x84, 0x78,
0x80, 0xf9, 0xf2, 0x01,
0xff, 0xea, 0x10, 0x03,
0x08, 0x92, 0x25, 0x03,
- 0x00, 0xe2, 0x62, 0x43,
- 0x01, 0x1a, 0xec, 0x7d,
- 0x40, 0x5b, 0xe8, 0x7d,
- 0x01, 0x1a, 0xd6, 0x6d,
+ 0x00, 0xe2, 0x76, 0x43,
+ 0x01, 0x1a, 0x00, 0x7e,
+ 0x40, 0x5b, 0xfc, 0x7d,
+ 0x01, 0x1a, 0xea, 0x6d,
0xfc, 0x42, 0x84, 0x78,
- 0x01, 0x1a, 0xf0, 0x6d,
- 0x10, 0xea, 0x64, 0x59,
+ 0x01, 0x1a, 0x04, 0x6e,
+ 0x10, 0xea, 0x6e, 0x59,
0x10, 0xea, 0x04, 0x00,
0xfc, 0x42, 0x84, 0x78,
- 0x10, 0x40, 0xf6, 0x6d,
+ 0x10, 0x40, 0x0a, 0x6e,
0x20, 0x4d, 0x84, 0x78,
- 0x40, 0x5b, 0xd6, 0x6d,
+ 0x40, 0x5b, 0xea, 0x6d,
0x01, 0x1a, 0x84, 0x78,
0x01, 0x90, 0x21, 0x1b,
0x30, 0x3f, 0xc0, 0x09,
0x30, 0xe0, 0x84, 0x60,
0x40, 0x4b, 0x84, 0x68,
0xff, 0xea, 0x52, 0x01,
- 0xee, 0x00, 0x0c, 0x6e,
+ 0xee, 0x00, 0x20, 0x6e,
0x80, 0xf9, 0xf2, 0x01,
0xff, 0x90, 0x21, 0x1b,
0x02, 0xea, 0xb4, 0x00,
0x20, 0xea, 0x9a, 0x00,
- 0xf3, 0x42, 0x16, 0x6e,
- 0x12, 0xea, 0x64, 0x59,
+ 0x04, 0x41, 0x26, 0x7e,
+ 0x08, 0xea, 0x98, 0x00,
+ 0x08, 0x57, 0xae, 0x00,
+ 0xf3, 0x42, 0x30, 0x6e,
+ 0x12, 0xea, 0x6e, 0x59,
0x12, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
- 0x0d, 0xea, 0x64, 0x59,
+ 0x00, 0xe2, 0x28, 0x42,
+ 0x0d, 0xea, 0x6e, 0x59,
0x0d, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x14, 0x42,
+ 0x00, 0xe2, 0x28, 0x42,
0x01, 0x90, 0x21, 0x1b,
- 0x11, 0xea, 0x64, 0x59,
+ 0x11, 0xea, 0x6e, 0x59,
0x11, 0xea, 0x04, 0x00,
- 0x00, 0xe2, 0x52, 0x5b,
+ 0x00, 0xe2, 0x66, 0x5b,
0x08, 0x5a, 0xb4, 0x00,
- 0x00, 0xe2, 0x44, 0x5e,
+ 0x00, 0xe2, 0x5e, 0x5e,
0xa8, 0xea, 0x32, 0x00,
- 0x00, 0xe2, 0x56, 0x59,
- 0x80, 0x1a, 0x32, 0x7e,
- 0x00, 0xe2, 0x44, 0x5e,
+ 0x00, 0xe2, 0x60, 0x59,
+ 0x80, 0x1a, 0x4c, 0x7e,
+ 0x00, 0xe2, 0x5e, 0x5e,
0x80, 0x19, 0x32, 0x00,
- 0x40, 0x5b, 0x38, 0x6e,
- 0x08, 0x5a, 0x38, 0x7e,
+ 0x40, 0x5b, 0x52, 0x6e,
+ 0x08, 0x5a, 0x52, 0x7e,
0x20, 0x4d, 0x84, 0x78,
0x02, 0x84, 0x09, 0x03,
- 0x40, 0x5b, 0x04, 0x7e,
+ 0x40, 0x5b, 0x18, 0x7e,
0xff, 0x90, 0x21, 0x1b,
0x80, 0xf9, 0xf2, 0x01,
- 0x08, 0x92, 0x63, 0x6b,
+ 0x08, 0x92, 0x77, 0x6b,
0x02, 0xea, 0xb4, 0x04,
0x01, 0x40, 0xe1, 0x30,
0x05, 0x41, 0xe3, 0x98,
@@ -1039,138 +1052,138 @@
{ ahd_patch0_func, 64, 1, 1 },
{ ahd_patch2_func, 67, 1, 2 },
{ ahd_patch0_func, 68, 1, 1 },
- { ahd_patch4_func, 116, 1, 1 },
- { ahd_patch2_func, 175, 3, 1 },
- { ahd_patch1_func, 178, 2, 1 },
- { ahd_patch5_func, 180, 1, 1 },
- { ahd_patch2_func, 189, 1, 2 },
- { ahd_patch0_func, 190, 1, 1 },
- { ahd_patch6_func, 191, 2, 2 },
- { ahd_patch0_func, 193, 6, 3 },
- { ahd_patch2_func, 196, 1, 2 },
- { ahd_patch0_func, 197, 1, 1 },
- { ahd_patch2_func, 200, 1, 2 },
- { ahd_patch0_func, 201, 1, 1 },
- { ahd_patch3_func, 203, 1, 1 },
- { ahd_patch7_func, 204, 3, 1 },
- { ahd_patch3_func, 213, 1, 1 },
- { ahd_patch5_func, 214, 16, 2 },
- { ahd_patch0_func, 230, 1, 1 },
- { ahd_patch8_func, 250, 2, 1 },
- { ahd_patch1_func, 254, 1, 2 },
- { ahd_patch0_func, 255, 1, 1 },
- { ahd_patch7_func, 258, 3, 1 },
- { ahd_patch1_func, 273, 1, 2 },
- { ahd_patch0_func, 274, 1, 1 },
- { ahd_patch1_func, 277, 1, 2 },
- { ahd_patch0_func, 278, 1, 1 },
- { ahd_patch2_func, 281, 1, 2 },
- { ahd_patch0_func, 282, 1, 1 },
- { ahd_patch9_func, 295, 2, 2 },
- { ahd_patch0_func, 297, 1, 1 },
- { ahd_patch1_func, 339, 1, 2 },
- { ahd_patch0_func, 340, 1, 1 },
- { ahd_patch2_func, 348, 1, 2 },
- { ahd_patch0_func, 349, 1, 1 },
- { ahd_patch2_func, 352, 1, 2 },
- { ahd_patch0_func, 353, 1, 1 },
- { ahd_patch1_func, 359, 1, 2 },
- { ahd_patch0_func, 360, 1, 1 },
- { ahd_patch1_func, 362, 1, 2 },
+ { ahd_patch4_func, 115, 1, 1 },
+ { ahd_patch2_func, 180, 3, 1 },
+ { ahd_patch1_func, 183, 2, 1 },
+ { ahd_patch5_func, 185, 1, 1 },
+ { ahd_patch2_func, 194, 1, 2 },
+ { ahd_patch0_func, 195, 1, 1 },
+ { ahd_patch6_func, 196, 2, 2 },
+ { ahd_patch0_func, 198, 6, 3 },
+ { ahd_patch2_func, 201, 1, 2 },
+ { ahd_patch0_func, 202, 1, 1 },
+ { ahd_patch2_func, 205, 1, 2 },
+ { ahd_patch0_func, 206, 1, 1 },
+ { ahd_patch3_func, 208, 1, 1 },
+ { ahd_patch7_func, 209, 3, 1 },
+ { ahd_patch3_func, 218, 1, 1 },
+ { ahd_patch5_func, 219, 16, 2 },
+ { ahd_patch0_func, 235, 1, 1 },
+ { ahd_patch8_func, 260, 2, 1 },
+ { ahd_patch1_func, 264, 1, 2 },
+ { ahd_patch0_func, 265, 1, 1 },
+ { ahd_patch7_func, 268, 3, 1 },
+ { ahd_patch1_func, 283, 1, 2 },
+ { ahd_patch0_func, 284, 1, 1 },
+ { ahd_patch1_func, 287, 1, 2 },
+ { ahd_patch0_func, 288, 1, 1 },
+ { ahd_patch2_func, 291, 1, 2 },
+ { ahd_patch0_func, 292, 1, 1 },
+ { ahd_patch9_func, 305, 2, 2 },
+ { ahd_patch0_func, 307, 1, 1 },
+ { ahd_patch1_func, 349, 1, 2 },
+ { ahd_patch0_func, 350, 1, 1 },
+ { ahd_patch2_func, 358, 1, 2 },
+ { ahd_patch0_func, 359, 1, 1 },
+ { ahd_patch2_func, 362, 1, 2 },
{ ahd_patch0_func, 363, 1, 1 },
- { ahd_patch10_func, 382, 1, 1 },
- { ahd_patch10_func, 385, 1, 1 },
- { ahd_patch10_func, 387, 1, 1 },
- { ahd_patch10_func, 399, 1, 1 },
- { ahd_patch1_func, 409, 1, 2 },
- { ahd_patch0_func, 410, 1, 1 },
- { ahd_patch1_func, 412, 1, 2 },
- { ahd_patch0_func, 413, 1, 1 },
- { ahd_patch1_func, 421, 1, 2 },
- { ahd_patch0_func, 422, 1, 1 },
- { ahd_patch2_func, 435, 1, 2 },
- { ahd_patch0_func, 436, 1, 1 },
- { ahd_patch11_func, 472, 1, 1 },
- { ahd_patch1_func, 480, 1, 2 },
- { ahd_patch0_func, 481, 1, 1 },
- { ahd_patch2_func, 493, 1, 2 },
- { ahd_patch0_func, 494, 1, 1 },
- { ahd_patch12_func, 497, 6, 2 },
- { ahd_patch0_func, 503, 1, 1 },
- { ahd_patch13_func, 524, 7, 1 },
- { ahd_patch14_func, 533, 1, 1 },
- { ahd_patch15_func, 542, 1, 1 },
- { ahd_patch16_func, 543, 1, 2 },
- { ahd_patch0_func, 544, 1, 1 },
- { ahd_patch17_func, 547, 1, 1 },
- { ahd_patch16_func, 548, 1, 1 },
- { ahd_patch18_func, 559, 1, 2 },
- { ahd_patch0_func, 560, 1, 1 },
- { ahd_patch1_func, 579, 1, 2 },
- { ahd_patch0_func, 580, 1, 1 },
- { ahd_patch1_func, 583, 1, 2 },
- { ahd_patch0_func, 584, 1, 1 },
- { ahd_patch2_func, 589, 1, 2 },
+ { ahd_patch1_func, 369, 1, 2 },
+ { ahd_patch0_func, 370, 1, 1 },
+ { ahd_patch1_func, 372, 1, 2 },
+ { ahd_patch0_func, 373, 1, 1 },
+ { ahd_patch10_func, 392, 1, 1 },
+ { ahd_patch10_func, 395, 1, 1 },
+ { ahd_patch10_func, 397, 1, 1 },
+ { ahd_patch10_func, 409, 1, 1 },
+ { ahd_patch1_func, 419, 1, 2 },
+ { ahd_patch0_func, 420, 1, 1 },
+ { ahd_patch1_func, 422, 1, 2 },
+ { ahd_patch0_func, 423, 1, 1 },
+ { ahd_patch1_func, 431, 1, 2 },
+ { ahd_patch0_func, 432, 1, 1 },
+ { ahd_patch2_func, 445, 1, 2 },
+ { ahd_patch0_func, 446, 1, 1 },
+ { ahd_patch11_func, 482, 1, 1 },
+ { ahd_patch1_func, 490, 1, 2 },
+ { ahd_patch0_func, 491, 1, 1 },
+ { ahd_patch2_func, 503, 1, 2 },
+ { ahd_patch0_func, 504, 1, 1 },
+ { ahd_patch12_func, 507, 6, 2 },
+ { ahd_patch0_func, 513, 1, 1 },
+ { ahd_patch13_func, 534, 7, 1 },
+ { ahd_patch14_func, 543, 1, 1 },
+ { ahd_patch15_func, 552, 1, 1 },
+ { ahd_patch16_func, 553, 1, 2 },
+ { ahd_patch0_func, 554, 1, 1 },
+ { ahd_patch17_func, 557, 1, 1 },
+ { ahd_patch16_func, 558, 1, 1 },
+ { ahd_patch18_func, 569, 1, 2 },
+ { ahd_patch0_func, 570, 1, 1 },
+ { ahd_patch1_func, 589, 1, 2 },
{ ahd_patch0_func, 590, 1, 1 },
- { ahd_patch2_func, 594, 1, 2 },
- { ahd_patch0_func, 595, 1, 1 },
- { ahd_patch1_func, 596, 1, 2 },
- { ahd_patch0_func, 597, 1, 1 },
- { ahd_patch2_func, 608, 1, 2 },
- { ahd_patch0_func, 609, 1, 1 },
- { ahd_patch19_func, 613, 1, 1 },
- { ahd_patch20_func, 618, 1, 1 },
- { ahd_patch21_func, 619, 2, 1 },
- { ahd_patch20_func, 623, 1, 2 },
- { ahd_patch0_func, 624, 1, 1 },
- { ahd_patch2_func, 627, 1, 2 },
- { ahd_patch0_func, 628, 1, 1 },
- { ahd_patch2_func, 643, 1, 2 },
- { ahd_patch0_func, 644, 1, 1 },
- { ahd_patch13_func, 645, 14, 1 },
- { ahd_patch1_func, 663, 1, 2 },
- { ahd_patch0_func, 664, 1, 1 },
- { ahd_patch13_func, 665, 1, 1 },
- { ahd_patch1_func, 677, 1, 2 },
- { ahd_patch0_func, 678, 1, 1 },
- { ahd_patch1_func, 685, 1, 2 },
- { ahd_patch0_func, 686, 1, 1 },
- { ahd_patch19_func, 709, 1, 1 },
- { ahd_patch19_func, 747, 1, 1 },
- { ahd_patch1_func, 758, 1, 2 },
- { ahd_patch0_func, 759, 1, 1 },
- { ahd_patch1_func, 776, 1, 2 },
- { ahd_patch0_func, 777, 1, 1 },
- { ahd_patch1_func, 779, 1, 2 },
- { ahd_patch0_func, 780, 1, 1 },
- { ahd_patch1_func, 783, 1, 2 },
- { ahd_patch0_func, 784, 1, 1 },
- { ahd_patch22_func, 786, 1, 2 },
- { ahd_patch0_func, 787, 2, 1 },
- { ahd_patch23_func, 790, 4, 2 },
- { ahd_patch0_func, 794, 1, 1 },
- { ahd_patch23_func, 802, 11, 1 }
+ { ahd_patch1_func, 593, 1, 2 },
+ { ahd_patch0_func, 594, 1, 1 },
+ { ahd_patch2_func, 599, 1, 2 },
+ { ahd_patch0_func, 600, 1, 1 },
+ { ahd_patch2_func, 604, 1, 2 },
+ { ahd_patch0_func, 605, 1, 1 },
+ { ahd_patch1_func, 606, 1, 2 },
+ { ahd_patch0_func, 607, 1, 1 },
+ { ahd_patch2_func, 618, 1, 2 },
+ { ahd_patch0_func, 619, 1, 1 },
+ { ahd_patch19_func, 623, 1, 1 },
+ { ahd_patch20_func, 628, 1, 1 },
+ { ahd_patch21_func, 629, 2, 1 },
+ { ahd_patch20_func, 633, 1, 2 },
+ { ahd_patch0_func, 634, 1, 1 },
+ { ahd_patch2_func, 637, 1, 2 },
+ { ahd_patch0_func, 638, 1, 1 },
+ { ahd_patch2_func, 653, 1, 2 },
+ { ahd_patch0_func, 654, 1, 1 },
+ { ahd_patch13_func, 655, 14, 1 },
+ { ahd_patch1_func, 673, 1, 2 },
+ { ahd_patch0_func, 674, 1, 1 },
+ { ahd_patch13_func, 675, 1, 1 },
+ { ahd_patch1_func, 687, 1, 2 },
+ { ahd_patch0_func, 688, 1, 1 },
+ { ahd_patch1_func, 695, 1, 2 },
+ { ahd_patch0_func, 696, 1, 1 },
+ { ahd_patch19_func, 719, 1, 1 },
+ { ahd_patch19_func, 757, 1, 1 },
+ { ahd_patch1_func, 768, 1, 2 },
+ { ahd_patch0_func, 769, 1, 1 },
+ { ahd_patch7_func, 785, 3, 1 },
+ { ahd_patch1_func, 789, 1, 2 },
+ { ahd_patch0_func, 790, 1, 1 },
+ { ahd_patch1_func, 792, 1, 2 },
+ { ahd_patch0_func, 793, 1, 1 },
+ { ahd_patch1_func, 796, 1, 2 },
+ { ahd_patch0_func, 797, 1, 1 },
+ { ahd_patch22_func, 799, 1, 2 },
+ { ahd_patch0_func, 800, 2, 1 },
+ { ahd_patch23_func, 803, 4, 2 },
+ { ahd_patch0_func, 807, 1, 1 },
+ { ahd_patch23_func, 815, 11, 1 }
};
static struct cs {
uint16_t begin;
uint16_t end;
} critical_sections[] = {
- { 17, 28 },
- { 29, 30 },
+ { 17, 30 },
{ 47, 58 },
{ 61, 63 },
{ 65, 66 },
{ 72, 92 },
- { 110, 137 },
- { 138, 175 },
- { 180, 188 },
- { 213, 264 },
- { 425, 433 },
- { 443, 445 },
- { 448, 457 },
- { 709, 739 },
- { 749, 753 }
+ { 110, 142 },
+ { 143, 180 },
+ { 185, 193 },
+ { 218, 274 },
+ { 435, 443 },
+ { 453, 455 },
+ { 458, 467 },
+ { 719, 749 },
+ { 759, 763 }
};
static const int num_critical_sections = sizeof(critical_sections)
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c
index f936b69..9241027 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#22 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $
*
* $FreeBSD$
*/
@@ -609,10 +609,10 @@
while (line < cur_instr->srcline) {
fgets(buf, sizeof(buf), ifile);
- fprintf(listfile, "\t\t%s", buf);
+ fprintf(listfile, " \t%s", buf);
line++;
}
- fprintf(listfile, "%03x %02x%02x%02x%02x", instrptr,
+ fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr,
#ifdef __LITTLE_ENDIAN
cur_instr->format.bytes[0],
cur_instr->format.bytes[1],
@@ -624,14 +624,23 @@
cur_instr->format.bytes[1],
cur_instr->format.bytes[0]);
#endif
- fgets(buf, sizeof(buf), ifile);
- fprintf(listfile, "\t%s", buf);
- line++;
+ /*
+ * Macro expansions can cause several instructions
+ * to be output for a single source line. Only
+ * advance the line once in these cases.
+ */
+ if (line == cur_instr->srcline) {
+ fgets(buf, sizeof(buf), ifile);
+ fprintf(listfile, "\t%s", buf);
+ line++;
+ } else {
+ fprintf(listfile, "\n");
+ }
instrptr++;
}
/* Dump the remainder of the file */
while(fgets(buf, sizeof(buf), ifile) != NULL)
- fprintf(listfile, "\t\t%s", buf);
+ fprintf(listfile, " %s", buf);
fclose(ifile);
}
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
index 67e046d..c328596 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_gram.y#29 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_gram.y#30 $
*
* $FreeBSD$
*/
@@ -157,6 +157,8 @@
%token T_END_CS
+%token T_PAD_PAGE
+
%token T_FIELD
%token T_ENUM
@@ -189,6 +191,10 @@
%token <value> T_OR
+/* 16 bit extensions */
+%token <value> T_OR16 T_AND16 T_XOR16 T_ADD16
+%token <value> T_ADC16 T_MVI16 T_TEST16 T_CMP16 T_CMPXCHG
+
%token T_RET
%token T_NOP
@@ -207,7 +213,7 @@
%type <expression> expression immediate immediate_or_a
-%type <value> export ret f1_opcode f2_opcode jmp_jc_jnc_call jz_jnz je_jne
+%type <value> export ret f1_opcode f2_opcode f4_opcode jmp_jc_jnc_call jz_jnz je_jne
%type <value> mode_value mode_list macro_arglist
@@ -1304,6 +1310,15 @@
| T_ROR { $$ = AIC_OP_ROR; }
;
+f4_opcode:
+ T_OR16 { $$ = AIC_OP_OR16; }
+| T_AND16 { $$ = AIC_OP_AND16; }
+| T_XOR16 { $$ = AIC_OP_XOR16; }
+| T_ADD16 { $$ = AIC_OP_ADD16; }
+| T_ADC16 { $$ = AIC_OP_ADC16; }
+| T_MVI16 { $$ = AIC_OP_MVI16; }
+;
+
code:
f2_opcode destination ',' expression opt_source ret ';'
{
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
index e64f802..9df9e2c 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
@@ -37,13 +37,14 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_insformat.h#11 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_insformat.h#12 $
*
* $FreeBSD$
*/
#include <asm/byteorder.h>
+/* 8bit ALU logic operations */
struct ins_format1 {
#ifdef __LITTLE_ENDIAN
uint32_t immediate : 8,
@@ -62,6 +63,7 @@
#endif
};
+/* 8bit ALU shift/rotate operations */
struct ins_format2 {
#ifdef __LITTLE_ENDIAN
uint32_t shift_control : 8,
@@ -80,6 +82,7 @@
#endif
};
+/* 8bit branch control operations */
struct ins_format3 {
#ifdef __LITTLE_ENDIAN
uint32_t immediate : 8,
@@ -96,10 +99,68 @@
#endif
};
+/* 16bit ALU logic operations */
+struct ins_format4 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t opcode_ext : 8,
+ source : 9,
+ destination : 9,
+ ret : 1,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ ret : 1,
+ destination : 9,
+ source : 9,
+ opcode_ext : 8;
+#endif
+};
+
+/* 16bit branch control operations */
+struct ins_format5 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t opcode_ext : 8,
+ source : 9,
+ address : 10,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ address : 10,
+ source : 9,
+ opcode_ext : 8;
+#endif
+};
+
+/* Far branch operations */
+struct ins_format6 {
+#ifdef __LITTLE_ENDIAN
+ uint32_t page : 3,
+ opcode_ext : 5,
+ source : 9,
+ address : 10,
+ opcode : 4,
+ parity : 1;
+#else
+ uint32_t parity : 1,
+ opcode : 4,
+ address : 10,
+ source : 9,
+ opcode_ext : 5,
+ page : 3;
+#endif
+};
+
union ins_formats {
struct ins_format1 format1;
struct ins_format2 format2;
struct ins_format3 format3;
+ struct ins_format4 format4;
+ struct ins_format5 format5;
+ struct ins_format6 format6;
uint8_t bytes[4];
uint32_t integer;
};
@@ -118,6 +179,8 @@
#define AIC_OP_ROL 0x5
#define AIC_OP_BMOV 0x6
+#define AIC_OP_MVI16 0x7
+
#define AIC_OP_JMP 0x8
#define AIC_OP_JC 0x9
#define AIC_OP_JNC 0xa
@@ -131,3 +194,26 @@
#define AIC_OP_SHL 0x10
#define AIC_OP_SHR 0x20
#define AIC_OP_ROR 0x30
+
+/* 16bit Ops. Low byte main opcode. High byte extended opcode. */
+#define AIC_OP_OR16 0x8005
+#define AIC_OP_AND16 0x8105
+#define AIC_OP_XOR16 0x8205
+#define AIC_OP_ADD16 0x8305
+#define AIC_OP_ADC16 0x8405
+#define AIC_OP_JNE16 0x8805
+#define AIC_OP_JNZ16 0x8905
+#define AIC_OP_JE16 0x8C05
+#define AIC_OP_JZ16 0x8B05
+#define AIC_OP_JMP16 0x9005
+#define AIC_OP_JC16 0x9105
+#define AIC_OP_JNC16 0x9205
+#define AIC_OP_CALL16 0x9305
+#define AIC_OP_CALL16 0x9305
+
+/* Page extension is low three bits of second opcode byte. */
+#define AIC_OP_JMPF 0xA005
+#define AIC_OP_CALLF 0xB005
+#define AIC_OP_JCF 0xC005
+#define AIC_OP_JNCF 0xD005
+#define AIC_OP_CMPXCHG 0xE005
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
index 45c0b23..7c3983f 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_scan.l#19 $
+ * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_scan.l#20 $
*
* $FreeBSD$
*/
@@ -132,7 +132,7 @@
*string_buf_ptr++ = *yptr++;
}
}
-
+else { return T_ELSE; }
VERSION { return T_VERSION; }
PREFIX { return T_PREFIX; }
PATCH_ARG_LIST { return T_PATCH_ARG_LIST; }
@@ -173,10 +173,6 @@
yylval.value = WO;
return T_MODE;
}
-BEGIN_CRITICAL { return T_BEGIN_CS; }
-END_CRITICAL { return T_END_CS; }
-SET_SRC_MODE { return T_SET_SRC_MODE; }
-SET_DST_MODE { return T_SET_DST_MODE; }
field { return T_FIELD; }
enum { return T_ENUM; }
mask { return T_MASK; }
@@ -192,6 +188,13 @@
sindex { return T_SINDEX; }
A { return T_A; }
+ /* Instruction Formatting */
+PAD_PAGE { return T_PAD_PAGE; }
+BEGIN_CRITICAL { return T_BEGIN_CS; }
+END_CRITICAL { return T_END_CS; }
+SET_SRC_MODE { return T_SET_SRC_MODE; }
+SET_DST_MODE { return T_SET_DST_MODE; }
+
/* Opcodes */
shl { return T_SHL; }
shr { return T_SHR; }
@@ -223,7 +226,17 @@
or { return T_OR; }
ret { return T_RET; }
nop { return T_NOP; }
-else { return T_ELSE; }
+
+ /* ARP2 16bit extensions */
+or16 { return T_OR16; }
+and16 { return T_AND16; }
+xor16 { return T_XOR16; }
+add16 { return T_ADD16; }
+adc16 { return T_ADC16; }
+mvi16 { return T_MVI16; }
+test16 { return T_TEST16; }
+cmp16 { return T_CMP16; }
+cmpxchg { return T_CMPXCHG; }
/* Allowed Symbols */
\<\< { return T_EXPR_LSHIFT; }
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index c8a32cf..cbf8252 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -246,6 +246,7 @@
* total_xfer_length in xferred. These values are restored in
* pci_unmap_srb_sense. This is the only place xferred is used.
*/
+ unsigned char *virt_addr_req; /* Saved virtual address of the request buffer */
u32 xferred; /* Saved copy of total_xfer_length */
u16 state;
@@ -2017,7 +2018,7 @@
sg_verify_length(srb);
/* we need the corresponding virtual address */
- if (!segment) {
+ if (!segment || (srb->flag & AUTO_REQSENSE)) {
srb->virt_addr += xferred;
return;
}
@@ -3318,6 +3319,7 @@
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address;
srb->segment_x[0].length =
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length;
+ srb->virt_addr = srb->virt_addr_req;
}
@@ -3711,6 +3713,8 @@
srb->xferred = srb->total_xfer_length;
/* srb->segment_x : a one entry of S/G list table */
srb->total_xfer_length = sizeof(cmd->sense_buffer);
+ srb->virt_addr_req = srb->virt_addr;
+ srb->virt_addr = cmd->sense_buffer;
srb->segment_x[0].length = sizeof(cmd->sense_buffer);
/* Map sense buffer */
srb->segment_x[0].address =
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 822b9fa..eaefedd 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -87,7 +87,7 @@
static int init_timeout = 5;
static int max_requests = 50;
-#define IBMVSCSI_VERSION "1.5.7"
+#define IBMVSCSI_VERSION "1.5.8"
MODULE_DESCRIPTION("IBM Virtual SCSI");
MODULE_AUTHOR("Dave Boutcher");
@@ -534,7 +534,6 @@
static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
struct ibmvscsi_host_data *hostdata)
{
- struct scsi_cmnd *cmnd;
u64 *crq_as_u64 = (u64 *) &evt_struct->crq;
int rc;
@@ -544,19 +543,8 @@
* can handle more requests (can_queue) when we actually can't
*/
if ((evt_struct->crq.format == VIOSRP_SRP_FORMAT) &&
- (atomic_dec_if_positive(&hostdata->request_limit) < 0)) {
- /* See if the adapter is disabled */
- if (atomic_read(&hostdata->request_limit) < 0)
- goto send_error;
-
- printk(KERN_WARNING
- "ibmvscsi: Warning, request_limit exceeded\n");
- unmap_cmd_data(&evt_struct->iu.srp.cmd,
- evt_struct,
- hostdata->dev);
- free_event_struct(&hostdata->pool, evt_struct);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
+ (atomic_dec_if_positive(&hostdata->request_limit) < 0))
+ goto send_error;
/* Copy the IU into the transfer area */
*evt_struct->xfer_iu = evt_struct->iu;
@@ -572,7 +560,7 @@
ibmvscsi_send_crq(hostdata, crq_as_u64[0], crq_as_u64[1])) != 0) {
list_del(&evt_struct->list);
- printk(KERN_ERR "ibmvscsi: failed to send event struct rc %d\n",
+ printk(KERN_ERR "ibmvscsi: send error %d\n",
rc);
goto send_error;
}
@@ -582,14 +570,8 @@
send_error:
unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
- if ((cmnd = evt_struct->cmnd) != NULL) {
- cmnd->result = DID_ERROR << 16;
- evt_struct->cmnd_done(cmnd);
- } else if (evt_struct->done)
- evt_struct->done(evt_struct);
-
free_event_struct(&hostdata->pool, evt_struct);
- return 0;
+ return SCSI_MLQUEUE_HOST_BUSY;
}
/**
@@ -802,7 +784,8 @@
case SRP_LOGIN_RSP_TYPE: /* it worked! */
break;
case SRP_LOGIN_REJ_TYPE: /* refused! */
- printk(KERN_INFO "ibmvscsi: SRP_LOGIN_REQ rejected\n");
+ printk(KERN_INFO "ibmvscsi: SRP_LOGIN_REJ reason %u\n",
+ evt_struct->xfer_iu->srp.login_rej.reason);
/* Login failed. */
atomic_set(&hostdata->request_limit, -1);
return;
@@ -834,6 +817,9 @@
return;
}
+ /* If we had any pending I/Os, kick them */
+ scsi_unblock_requests(hostdata->host);
+
send_mad_adapter_info(hostdata);
return;
}
@@ -862,6 +848,7 @@
init_timeout * HZ);
login = &evt_struct->iu.srp.login_req;
+ memset(login, 0x00, sizeof(struct srp_login_req));
login->type = SRP_LOGIN_REQ_TYPE;
login->max_requested_initiator_to_target_iulen = sizeof(union srp_iu);
login->required_buffer_formats = 0x0006;
@@ -1122,7 +1109,7 @@
* purge_requests: Our virtual adapter just shut down. purge any sent requests
* @hostdata: the adapter
*/
-static void purge_requests(struct ibmvscsi_host_data *hostdata)
+static void purge_requests(struct ibmvscsi_host_data *hostdata, int error_code)
{
struct srp_event_struct *tmp_evt, *pos;
unsigned long flags;
@@ -1131,7 +1118,7 @@
list_for_each_entry_safe(tmp_evt, pos, &hostdata->sent, list) {
list_del(&tmp_evt->list);
if (tmp_evt->cmnd) {
- tmp_evt->cmnd->result = (DID_ERROR << 16);
+ tmp_evt->cmnd->result = (error_code << 16);
unmap_cmd_data(&tmp_evt->iu.srp.cmd,
tmp_evt,
tmp_evt->hostdata->dev);
@@ -1186,12 +1173,30 @@
printk(KERN_ERR "ibmvscsi: unknown crq message type\n");
}
return;
- case 0xFF: /* Hypervisor telling us the connection is closed */
- printk(KERN_INFO "ibmvscsi: Virtual adapter failed!\n");
+ case 0xFF: /* Hypervisor telling us the connection is closed */
+ scsi_block_requests(hostdata->host);
+ if (crq->format == 0x06) {
+ /* We need to re-setup the interpartition connection */
+ printk(KERN_INFO
+ "ibmvscsi: Re-enabling adapter!\n");
+ purge_requests(hostdata, DID_REQUEUE);
+ if (ibmvscsi_reenable_crq_queue(&hostdata->queue,
+ hostdata) == 0)
+ if (ibmvscsi_send_crq(hostdata,
+ 0xC001000000000000LL, 0))
+ printk(KERN_ERR
+ "ibmvscsi: transmit error after"
+ " enable\n");
+ } else {
+ printk(KERN_INFO
+ "ibmvscsi: Virtual adapter failed rc %d!\n",
+ crq->format);
- atomic_set(&hostdata->request_limit, -1);
- purge_requests(hostdata);
- ibmvscsi_reset_crq_queue(&hostdata->queue, hostdata);
+ atomic_set(&hostdata->request_limit, -1);
+ purge_requests(hostdata, DID_ERROR);
+ ibmvscsi_reset_crq_queue(&hostdata->queue, hostdata);
+ }
+ scsi_unblock_requests(hostdata->host);
return;
case 0x80: /* real payload */
break;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 5b0edd1..4550d71 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -103,6 +103,9 @@
int ibmvscsi_reset_crq_queue(struct crq_queue *queue,
struct ibmvscsi_host_data *hostdata);
+int ibmvscsi_reenable_crq_queue(struct crq_queue *queue,
+ struct ibmvscsi_host_data *hostdata);
+
void ibmvscsi_handle_crq(struct viosrp_crq *crq,
struct ibmvscsi_host_data *hostdata);
int ibmvscsi_send_crq(struct ibmvscsi_host_data *hostdata,
diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c
index ce15d9e..7eed0b0 100644
--- a/drivers/scsi/ibmvscsi/iseries_vscsi.c
+++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c
@@ -124,6 +124,19 @@
}
/**
+ * reenable_crq_queue: - reenables a crq after a failure
+ * @queue: crq_queue to initialize and register
+ * @hostdata: ibmvscsi_host_data of host
+ *
+ * no-op for iSeries
+ */
+int ibmvscsi_reenable_crq_queue(struct crq_queue *queue,
+ struct ibmvscsi_host_data *hostdata)
+{
+ return 0;
+}
+
+/**
* ibmvscsi_send_crq: - Send a CRQ
* @hostdata: the adapter
* @word1: the first 64 bits of the data
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index 75db2f5..f47dd87 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -281,6 +281,28 @@
}
/**
+ * reenable_crq_queue: - reenables a crq after
+ * @queue: crq_queue to initialize and register
+ * @hostdata: ibmvscsi_host_data of host
+ *
+ */
+int ibmvscsi_reenable_crq_queue(struct crq_queue *queue,
+ struct ibmvscsi_host_data *hostdata)
+{
+ int rc;
+ struct vio_dev *vdev = to_vio_dev(hostdata->dev);
+
+ /* Re-enable the CRQ */
+ do {
+ rc = plpar_hcall_norets(H_ENABLE_CRQ, vdev->unit_address);
+ } while ((rc == H_InProgress) || (rc == H_Busy) || (H_isLongBusy(rc)));
+
+ if (rc)
+ printk(KERN_ERR "ibmvscsi: Error %d enabling adapter\n", rc);
+ return rc;
+}
+
+/**
* reset_crq_queue: - resets a crq after a failure
* @queue: crq_queue to initialize and register
* @hostdata: ibmvscsi_host_data of host
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index e5e1ca4..86c5461 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -3499,6 +3499,7 @@
int device_error;
uint32_t transfer_len;
IPS_DCDB_TABLE_TAPE *tapeDCDB;
+ IPS_SCSI_INQ_DATA inquiryData;
METHOD_TRACE("ips_map_status", 1);
@@ -3557,13 +3558,13 @@
errcode = DID_OK;
/* Restrict access to physical DASD */
- if ((scb->scsi_cmd->cmnd[0] == INQUIRY) &&
- ((((char *) scb->scsi_cmd->
- buffer)[0] & 0x1f) == TYPE_DISK)) {
- /* underflow -- no error */
- /* restrict access to physical DASD */
- errcode = DID_TIME_OUT;
- break;
+ if (scb->scsi_cmd->cmnd[0] == INQUIRY) {
+ ips_scmd_buf_read(scb->scsi_cmd,
+ &inquiryData, sizeof (inquiryData));
+ if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK) {
+ errcode = DID_TIME_OUT;
+ break;
+ }
}
} else
errcode = DID_ERROR;
@@ -4135,6 +4136,7 @@
uint8_t basic_status;
uint8_t ext_status;
int errcode;
+ IPS_SCSI_INQ_DATA inquiryData;
METHOD_TRACE("ips_chkstatus", 1);
@@ -4255,11 +4257,11 @@
scb->scsi_cmd->result = errcode << 16;
} else { /* bus == 0 */
/* restrict access to physical drives */
- if ((scb->scsi_cmd->cmnd[0] == INQUIRY) &&
- ((((char *) scb->scsi_cmd->buffer)[0] & 0x1f) ==
- TYPE_DISK)) {
-
- scb->scsi_cmd->result = DID_TIME_OUT << 16;
+ if (scb->scsi_cmd->cmnd[0] == INQUIRY) {
+ ips_scmd_buf_read(scb->scsi_cmd,
+ &inquiryData, sizeof (inquiryData));
+ if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK)
+ scb->scsi_cmd->result = DID_TIME_OUT << 16;
}
} /* else */
} else { /* recovered error / success */
@@ -5012,7 +5014,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (j >= 45)
@@ -5038,7 +5040,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (j >= 240)
@@ -5056,7 +5058,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 240)
@@ -5106,7 +5108,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (j >= 45)
@@ -5132,7 +5134,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (j >= 240)
@@ -5150,7 +5152,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 240)
@@ -5202,7 +5204,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 45) {
@@ -5228,7 +5230,7 @@
if (Post != 0x4F00)
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 120) {
@@ -5258,7 +5260,7 @@
break;
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
}
if (i >= 240) {
@@ -5318,12 +5320,12 @@
outb(IPS_BIT_RST, ha->io_addr + IPS_REG_SCPR);
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
outb(0, ha->io_addr + IPS_REG_SCPR);
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
if ((*ha->func.init) (ha))
break;
@@ -5363,12 +5365,12 @@
writeb(IPS_BIT_RST, ha->mem_ptr + IPS_REG_SCPR);
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
writeb(0, ha->mem_ptr + IPS_REG_SCPR);
/* Delay for 1 Second */
- MDELAY(IPS_ONE_SEC);
+ msleep(IPS_ONE_SEC);
if ((*ha->func.init) (ha))
break;
@@ -5409,7 +5411,7 @@
writel(0x80000000, ha->mem_ptr + IPS_REG_I960_IDR);
/* Delay for 5 Seconds */
- MDELAY(5 * IPS_ONE_SEC);
+ msleep(5 * IPS_ONE_SEC);
/* Do a PCI config read to wait for adapter */
pci_read_config_byte(ha->pcidev, 4, &junk);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index cfbceb5..07b1e7c 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -1700,6 +1700,31 @@
return sizeof(def_rw_recovery_mpage);
}
+/*
+ * We can turn this into a real blacklist if it's needed, for now just
+ * blacklist any Maxtor BANC1G10 revision firmware
+ */
+static int ata_dev_supports_fua(u16 *id)
+{
+ unsigned char model[41], fw[9];
+
+ if (!ata_id_has_fua(id))
+ return 0;
+
+ model[40] = '\0';
+ fw[8] = '\0';
+
+ ata_dev_id_string(id, model, ATA_ID_PROD_OFS, sizeof(model) - 1);
+ ata_dev_id_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw) - 1);
+
+ if (strncmp(model, "Maxtor", 6))
+ return 1;
+ if (strncmp(fw, "BANC1G10", 8))
+ return 1;
+
+ return 0; /* blacklisted */
+}
+
/**
* ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
* @args: device IDENTIFY data / SCSI command of interest.
@@ -1797,7 +1822,7 @@
return 0;
dpofua = 0;
- if (ata_id_has_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
+ if (ata_dev_supports_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
(!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count))
dpofua = 1 << 4;
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 511ed52..a487f41 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.02.00-rc4
+ * Version : v00.00.02.02
*
* Authors:
* Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
@@ -55,13 +55,13 @@
{
PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_SAS1064R,
+ PCI_DEVICE_ID_LSI_SAS1064R, // xscale IOP
PCI_ANY_ID,
PCI_ANY_ID,
},
{
PCI_VENDOR_ID_DELL,
- PCI_DEVICE_ID_DELL_PERC5,
+ PCI_DEVICE_ID_DELL_PERC5, // xscale IOP
PCI_ANY_ID,
PCI_ANY_ID,
},
@@ -119,12 +119,18 @@
spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
}
+
/**
- * megasas_enable_intr - Enables interrupts
+* The following functions are defined for xscale
+* (deviceid : 1064R, PERC5) controllers
+*/
+
+/**
+ * megasas_enable_intr_xscale - Enables interrupts
* @regs: MFI register set
*/
static inline void
-megasas_enable_intr(struct megasas_register_set __iomem * regs)
+megasas_enable_intr_xscale(struct megasas_register_set __iomem * regs)
{
writel(1, &(regs)->outbound_intr_mask);
@@ -133,13 +139,73 @@
}
/**
+ * megasas_read_fw_status_reg_xscale - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
+{
+ return readl(&(regs)->outbound_msg_0);
+}
+/**
+ * megasas_clear_interrupt_xscale - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_OB_INTR_STATUS_MASK)) {
+ return 1;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_intr_status);
+
+ return 0;
+}
+
+/**
+ * megasas_fire_cmd_xscale - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_xscale(dma_addr_t frame_phys_addr,u32 frame_count, struct megasas_register_set __iomem *regs)
+{
+ writel((frame_phys_addr >> 3)|(frame_count),
+ &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_xscale = {
+
+ .fire_cmd = megasas_fire_cmd_xscale,
+ .enable_intr = megasas_enable_intr_xscale,
+ .clear_intr = megasas_clear_intr_xscale,
+ .read_fw_status_reg = megasas_read_fw_status_reg_xscale,
+};
+
+/**
+* This is the end of set of functions & definitions specific
+* to xscale (deviceid : 1064R, PERC5) controllers
+*/
+
+/**
* megasas_disable_intr - Disables interrupts
* @regs: MFI register set
*/
static inline void
megasas_disable_intr(struct megasas_register_set __iomem * regs)
{
- u32 mask = readl(®s->outbound_intr_mask) & (~0x00000001);
+ u32 mask = 0x1f;
writel(mask, ®s->outbound_intr_mask);
/* Dummy readl to force pci flush */
@@ -167,8 +233,7 @@
/*
* Issue the frame using inbound queue port
*/
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
/*
* Wait for cmd_status to change
@@ -198,8 +263,7 @@
{
cmd->cmd_status = ENODATA;
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA));
@@ -242,8 +306,7 @@
cmd->sync_cmd = 1;
cmd->cmd_status = 0xFF;
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
/*
* Wait for this cmd to complete
@@ -558,112 +621,29 @@
}
/**
- * megasas_build_cmd - Prepares a command packet
- * @instance: Adapter soft state
- * @scp: SCSI command
- * @frame_count: [OUT] Number of frames used to prepare this command
+ * megasas_is_ldio - Checks if the cmd is for logical drive
+ * @scmd: SCSI command
+ *
+ * Called by megasas_queue_command to find out if the command to be queued
+ * is a logical drive command
*/
-static struct megasas_cmd *megasas_build_cmd(struct megasas_instance
- *instance,
- struct scsi_cmnd *scp,
- int *frame_count)
+static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
{
- u32 logical_cmd;
- struct megasas_cmd *cmd;
-
- /*
- * Find out if this is logical or physical drive command.
- */
- logical_cmd = MEGASAS_IS_LOGICAL(scp);
-
- /*
- * Logical drive command
- */
- if (logical_cmd) {
-
- if (scp->device->id >= MEGASAS_MAX_LD) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- switch (scp->cmnd[0]) {
-
- case READ_10:
- case WRITE_10:
- case READ_12:
- case WRITE_12:
- case READ_6:
- case WRITE_6:
- case READ_16:
- case WRITE_16:
- /*
- * Fail for LUN > 0
- */
- if (scp->device->lun) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_ldio(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
-
- default:
- /*
- * Fail for LUN > 0
- */
- if (scp->device->lun) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_dcdb(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
- }
- } else {
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_dcdb(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
+ if (!MEGASAS_IS_LOGICAL(cmd))
+ return 0;
+ switch (cmd->cmnd[0]) {
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ case READ_16:
+ case WRITE_16:
+ return 1;
+ default:
+ return 0;
}
-
- return NULL;
}
/**
@@ -684,13 +664,27 @@
scmd->scsi_done = done;
scmd->result = 0;
- cmd = megasas_build_cmd(instance, scmd, &frame_count);
-
- if (!cmd) {
- done(scmd);
- return 0;
+ if (MEGASAS_IS_LOGICAL(scmd) &&
+ (scmd->device->id >= MEGASAS_MAX_LD || scmd->device->lun)) {
+ scmd->result = DID_BAD_TARGET << 16;
+ goto out_done;
}
+ cmd = megasas_get_cmd(instance);
+ if (!cmd)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Logical drive command
+ */
+ if (megasas_is_ldio(scmd))
+ frame_count = megasas_build_ldio(instance, scmd, cmd);
+ else
+ frame_count = megasas_build_dcdb(instance, scmd, cmd);
+
+ if (!frame_count)
+ goto out_return_cmd;
+
cmd->scmd = scmd;
scmd->SCp.ptr = (char *)cmd;
scmd->SCp.sent_command = jiffies;
@@ -702,10 +696,15 @@
instance->fw_outstanding++;
spin_unlock_irqrestore(&instance->instance_lock, flags);
- writel(((cmd->frame_phys_addr >> 3) | (cmd->frame_count - 1)),
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,cmd->frame_count-1,instance->reg_set);
return 0;
+
+ out_return_cmd:
+ megasas_return_cmd(instance, cmd);
+ out_done:
+ done(scmd);
+ return 0;
}
/**
@@ -1108,7 +1107,6 @@
static int
megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status)
{
- u32 status;
u32 producer;
u32 consumer;
u32 context;
@@ -1116,17 +1114,10 @@
/*
* Check if it is our interrupt
+ * Clear the interrupt
*/
- status = readl(&instance->reg_set->outbound_intr_status);
-
- if (!(status & MFI_OB_INTR_STATUS_MASK)) {
+ if(instance->instancet->clear_intr(instance->reg_set))
return IRQ_NONE;
- }
-
- /*
- * Clear the interrupt by writing back the same value
- */
- writel(status, &instance->reg_set->outbound_intr_status);
producer = *instance->producer;
consumer = *instance->consumer;
@@ -1160,7 +1151,7 @@
/**
* megasas_transition_to_ready - Move the FW to READY state
- * @reg_set: MFI register set
+ * @instance: Adapter soft state
*
* During the initialization, FW passes can potentially be in any one of
* several possible states. If the FW in operational, waiting-for-handshake
@@ -1168,14 +1159,14 @@
* has to wait for the ready state.
*/
static int
-megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set)
+megasas_transition_to_ready(struct megasas_instance* instance)
{
int i;
u8 max_wait;
u32 fw_state;
u32 cur_state;
- fw_state = readl(®_set->outbound_msg_0) & MFI_STATE_MASK;
+ fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
while (fw_state != MFI_STATE_READY) {
@@ -1193,7 +1184,7 @@
* Set the CLR bit in inbound doorbell
*/
writel(MFI_INIT_CLEAR_HANDSHAKE,
- ®_set->inbound_doorbell);
+ &instance->reg_set->inbound_doorbell);
max_wait = 2;
cur_state = MFI_STATE_WAIT_HANDSHAKE;
@@ -1203,8 +1194,8 @@
/*
* Bring it to READY state; assuming max wait 2 secs
*/
- megasas_disable_intr(reg_set);
- writel(MFI_INIT_READY, ®_set->inbound_doorbell);
+ megasas_disable_intr(instance->reg_set);
+ writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell);
max_wait = 10;
cur_state = MFI_STATE_OPERATIONAL;
@@ -1253,8 +1244,8 @@
* The cur_state should not last for more than max_wait secs
*/
for (i = 0; i < (max_wait * 1000); i++) {
- fw_state = MFI_STATE_MASK &
- readl(®_set->outbound_msg_0);
+ fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
+ MFI_STATE_MASK ;
if (fw_state == cur_state) {
msleep(1);
@@ -1616,18 +1607,20 @@
reg_set = instance->reg_set;
+ instance->instancet = &megasas_instance_template_xscale;
+
/*
* We expect the FW state to be READY
*/
- if (megasas_transition_to_ready(instance->reg_set))
+ if (megasas_transition_to_ready(instance))
goto fail_ready_state;
/*
* Get various operational parameters from status register
*/
- instance->max_fw_cmds = readl(®_set->outbound_msg_0) & 0x00FFFF;
- instance->max_num_sge = (readl(®_set->outbound_msg_0) & 0xFF0000) >>
- 0x10;
+ instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+ instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
+ 0x10;
/*
* Create a pool of commands
*/
@@ -1936,8 +1929,7 @@
/*
* Issue the aen registration frame
*/
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
return 0;
}
@@ -2126,7 +2118,7 @@
goto fail_irq;
}
- megasas_enable_intr(instance->reg_set);
+ instance->instancet->enable_intr(instance->reg_set);
/*
* Store instance in PCI softstate
@@ -2681,9 +2673,8 @@
unsigned long arg)
{
switch (cmd) {
- case MEGASAS_IOC_FIRMWARE:{
- return megasas_mgmt_compat_ioctl_fw(file, arg);
- }
+ case MEGASAS_IOC_FIRMWARE32:
+ return megasas_mgmt_compat_ioctl_fw(file, arg);
case MEGASAS_IOC_GET_AEN:
return megasas_mgmt_ioctl_aen(file, arg);
}
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index eaec9d5..d6d166c 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,10 +18,9 @@
/**
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.02.00-rc4"
-#define MEGASAS_RELDATE "Sep 16, 2005"
-#define MEGASAS_EXT_VERSION "Fri Sep 16 12:37:08 EDT 2005"
-
+#define MEGASAS_VERSION "00.00.02.02"
+#define MEGASAS_RELDATE "Jan 23, 2006"
+#define MEGASAS_EXT_VERSION "Mon Jan 23 14:09:01 PST 2006"
/*
* =====================================
* MegaRAID SAS MFI firmware definitions
@@ -1013,6 +1012,16 @@
} __attribute__ ((packed));
+ struct megasas_instance_template {
+ void (*fire_cmd)(dma_addr_t ,u32 ,struct megasas_register_set __iomem *);
+
+ void (*enable_intr)(struct megasas_register_set __iomem *) ;
+
+ int (*clear_intr)(struct megasas_register_set __iomem *);
+
+ u32 (*read_fw_status_reg)(struct megasas_register_set __iomem *);
+ };
+
struct megasas_instance {
u32 *producer;
@@ -1056,6 +1065,8 @@
u32 fw_outstanding;
u32 hw_crit_error;
spinlock_t instance_lock;
+
+ struct megasas_instance_template *instancet;
};
#define MEGASAS_IS_LOGICAL(scp) \
@@ -1125,11 +1136,10 @@
struct compat_iovec sgl[MAX_IOCTL_SGE];
} __attribute__ ((packed));
-#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct compat_megasas_iocpacket)
-#else
-#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct megasas_iocpacket)
#endif
+#define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct megasas_iocpacket)
+#define MEGASAS_IOC_FIRMWARE32 _IOWR('M', 1, struct compat_megasas_iocpacket)
#define MEGASAS_IOC_GET_AEN _IOW('M', 3, struct megasas_aen)
struct megasas_mgmt_info {
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 0878f95..e023024 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,11 @@
* General Public License for more details.
*
******************************************************************************/
-#define QLA1280_VERSION "3.25"
+#define QLA1280_VERSION "3.26"
/*****************************************************************************
Revision History:
+ Rev 3.26, January 16, 2006 Jes Sorensen
+ - Ditch all < 2.6 support
Rev 3.25.1, February 10, 2005 Christoph Hellwig
- use pci_map_single to map non-S/G requests
- remove qla1280_proc_info
@@ -356,25 +358,18 @@
#include <asm/types.h>
#include <asm/system.h>
-#if LINUX_VERSION_CODE >= 0x020545
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
-#else
-#include <linux/blk.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "sd.h"
-#endif
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
#include <asm/sn/io.h>
#endif
-#if LINUX_VERSION_CODE < 0x020407
-#error "Kernels older than 2.4.7 are no longer supported"
+#if LINUX_VERSION_CODE < 0x020600
+#error "Kernels older than 2.6.0 are no longer supported"
#endif
@@ -441,52 +436,6 @@
#define NVRAM_DELAY() udelay(500) /* 2 microseconds */
-#if LINUX_VERSION_CODE < 0x020500
-#define HOST_LOCK &io_request_lock
-#define irqreturn_t void
-#define IRQ_RETVAL(foo)
-#define MSG_ORDERED_TAG 1
-
-#define DMA_BIDIRECTIONAL SCSI_DATA_UNKNOWN
-#define DMA_TO_DEVICE SCSI_DATA_WRITE
-#define DMA_FROM_DEVICE SCSI_DATA_READ
-#define DMA_NONE SCSI_DATA_NONE
-
-#ifndef HAVE_SECTOR_T
-typedef unsigned int sector_t;
-#endif
-
-static inline void
-scsi_adjust_queue_depth(struct scsi_device *device, int tag, int depth)
-{
- if (tag) {
- device->tagged_queue = tag;
- device->current_tag = 0;
- }
- device->queue_depth = depth;
-}
-static inline struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *t, size_t s)
-{
- return scsi_register(t, s);
-}
-static inline void scsi_host_put(struct Scsi_Host *h)
-{
- scsi_unregister(h);
-}
-#else
-#define HOST_LOCK ha->host->host_lock
-#endif
-#if LINUX_VERSION_CODE < 0x020600
-#define DEV_SIMPLE_TAGS(device) device->tagged_queue
-/*
- * Hack around that qla1280_remove_one is called from
- * qla1280_release in 2.4
- */
-#undef __devexit
-#define __devexit
-#else
-#define DEV_SIMPLE_TAGS(device) device->simple_tags
-#endif
#if defined(__ia64__) && !defined(ia64_platform_is)
#define ia64_platform_is(foo) (!strcmp(x, platform_name))
#endif
@@ -506,9 +455,6 @@
* QLogic Driver Support Function Prototypes.
*/
static void qla1280_done(struct scsi_qla_host *);
-#if LINUX_VERSION_CODE < 0x020545
-static void qla1280_get_target_options(struct scsi_cmnd *, struct scsi_qla_host *);
-#endif
static int qla1280_get_token(char *);
static int qla1280_setup(char *s) __init;
@@ -610,11 +556,7 @@
#define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer)
#define CMD_RESULT(Cmnd) Cmnd->result
#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
-#if LINUX_VERSION_CODE < 0x020545
-#define CMD_REQUEST(Cmnd) Cmnd->request.cmd
-#else
#define CMD_REQUEST(Cmnd) Cmnd->request->cmd
-#endif
#define CMD_HOST(Cmnd) Cmnd->device->host
#define SCSI_BUS_32(Cmnd) Cmnd->device->channel
@@ -1064,10 +1006,10 @@
add_timer(&timer);
/* wait for the action to complete (or the timer to expire) */
- spin_unlock_irq(HOST_LOCK);
+ spin_unlock_irq(ha->host->host_lock);
wait_for_completion(&wait);
del_timer_sync(&timer);
- spin_lock_irq(HOST_LOCK);
+ spin_lock_irq(ha->host->host_lock);
sp->wait = NULL;
/* the only action we might get a fail for is abort */
@@ -1173,96 +1115,6 @@
return 0;
}
-#if LINUX_VERSION_CODE < 0x020600
-static int
-qla1280_detect(struct scsi_host_template *template)
-{
- struct pci_device_id *id = &qla1280_pci_tbl[0];
- struct pci_dev *pdev = NULL;
- int num_hosts = 0;
-
- if (sizeof(struct srb) > sizeof(Scsi_Pointer)) {
- printk(KERN_WARNING
- "qla1280: struct srb too big, aborting\n");
- return 0;
- }
-
- if ((DMA_BIDIRECTIONAL != PCI_DMA_BIDIRECTIONAL) ||
- (DMA_TO_DEVICE != PCI_DMA_TODEVICE) ||
- (DMA_FROM_DEVICE != PCI_DMA_FROMDEVICE) ||
- (DMA_NONE != PCI_DMA_NONE)) {
- printk(KERN_WARNING
- "qla1280: dma direction bits don't match\n");
- return 0;
- }
-
-#ifdef MODULE
- /*
- * If we are called as a module, the qla1280 pointer may not be null
- * and it would point to our bootup string, just like on the lilo
- * command line. IF not NULL, then process this config string with
- * qla1280_setup
- *
- * Boot time Options
- * To add options at boot time add a line to your lilo.conf file like:
- * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
- * which will result in the first four devices on the first two
- * controllers being set to a tagged queue depth of 32.
- */
- if (qla1280)
- qla1280_setup(qla1280);
-#endif
-
- /* First Initialize QLA12160 on PCI Bus 1 Dev 2 */
- while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
- if (pdev->bus->number == 1 && PCI_SLOT(pdev->devfn) == 2) {
- if (!qla1280_probe_one(pdev, id))
- num_hosts++;
- }
- }
-
- pdev = NULL;
- /* Try and find each different type of adapter we support */
- for (id = &qla1280_pci_tbl[0]; id->device; id++) {
- while ((pdev = pci_find_device(id->vendor, id->device, pdev))) {
- /*
- * skip QLA12160 already initialized on
- * PCI Bus 1 Dev 2 since we already initialized
- * and presented it
- */
- if (id->device == PCI_DEVICE_ID_QLOGIC_ISP12160 &&
- pdev->bus->number == 1 &&
- PCI_SLOT(pdev->devfn) == 2)
- continue;
-
- if (!qla1280_probe_one(pdev, id))
- num_hosts++;
- }
- }
-
- return num_hosts;
-}
-
-/*
- * This looks a bit ugly as we could just pass down host to
- * qla1280_remove_one, but I want to keep qla1280_release purely a wrapper
- * around pci_driver::remove as used from 2.6 onwards.
- */
-static int
-qla1280_release(struct Scsi_Host *host)
-{
- struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-
- qla1280_remove_one(ha->pdev);
- return 0;
-}
-
-static int
-qla1280_biosparam_old(Disk * disk, kdev_t dev, int geom[])
-{
- return qla1280_biosparam(disk->device, NULL, disk->capacity, geom);
-}
-#endif
/* disable risc and host interrupts */
static inline void
@@ -1295,7 +1147,7 @@
ENTER_INTR ("qla1280_intr_handler");
ha = (struct scsi_qla_host *)dev_id;
- spin_lock(HOST_LOCK);
+ spin_lock(ha->host->host_lock);
ha->isr_count++;
reg = ha->iobase;
@@ -1311,7 +1163,7 @@
if (!list_empty(&ha->done_q))
qla1280_done(ha);
- spin_unlock(HOST_LOCK);
+ spin_unlock(ha->host->host_lock);
qla1280_enable_intrs(ha);
@@ -1411,11 +1263,9 @@
scsi_adjust_queue_depth(device, 0, default_depth);
}
-#if LINUX_VERSION_CODE > 0x020500
nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
-#endif
if (driver_setup.no_sync ||
(driver_setup.sync_mask &&
@@ -1432,38 +1282,14 @@
nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
}
- spin_lock_irqsave(HOST_LOCK, flags);
+ spin_lock_irqsave(ha->host->host_lock, flags);
if (nv->bus[bus].target[target].parameter.enable_sync)
status = qla1280_set_target_parameters(ha, bus, target);
qla1280_get_target_parameters(ha, device);
- spin_unlock_irqrestore(HOST_LOCK, flags);
+ spin_unlock_irqrestore(ha->host->host_lock, flags);
return status;
}
-#if LINUX_VERSION_CODE < 0x020545
-/**************************************************************************
- * qla1280_select_queue_depth
- *
- * Sets the queue depth for each SCSI device hanging off the input
- * host adapter. We use a queue depth of 2 for devices that do not
- * support tagged queueing.
- **************************************************************************/
-static void
-qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q)
-{
- struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
- struct scsi_device *sdev;
-
- ENTER("qla1280_select_queue_depth");
- for (sdev = sdev_q; sdev; sdev = sdev->next)
- if (sdev->host == host)
- qla1280_slave_configure(sdev);
-
- if (sdev_q)
- qla1280_check_for_dead_scsi_bus(ha, sdev_q->channel);
- LEAVE("qla1280_select_queue_depth");
-}
-#endif
/*
* qla1280_done
@@ -1523,10 +1349,6 @@
CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
ha->actthreads--;
-#if LINUX_VERSION_CODE < 0x020500
- if (cmd->cmnd[0] == INQUIRY)
- qla1280_get_target_options(cmd, ha);
-#endif
(*(cmd)->scsi_done)(cmd);
if(sp->wait != NULL)
@@ -1655,9 +1477,7 @@
struct device_reg __iomem *reg;
int status;
int bus;
-#if LINUX_VERSION_CODE > 0x020500
unsigned long flags;
-#endif
ENTER("qla1280_initialize_adapter");
@@ -1695,15 +1515,12 @@
"NVRAM\n");
}
-#if LINUX_VERSION_CODE >= 0x020500
/*
* It's necessary to grab the spin here as qla1280_mailbox_command
* needs to be able to drop the lock unconditionally to wait
* for completion.
- * In 2.4 ->detect is called with the io_request_lock held.
*/
- spin_lock_irqsave(HOST_LOCK, flags);
-#endif
+ spin_lock_irqsave(ha->host->host_lock, flags);
status = qla1280_load_firmware(ha);
if (status) {
@@ -1735,9 +1552,8 @@
ha->flags.online = 1;
out:
-#if LINUX_VERSION_CODE >= 0x020500
- spin_unlock_irqrestore(HOST_LOCK, flags);
-#endif
+ spin_unlock_irqrestore(ha->host->host_lock, flags);
+
if (status)
dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n");
@@ -2650,14 +2466,14 @@
timer.function = qla1280_mailbox_timeout;
add_timer(&timer);
- spin_unlock_irq(HOST_LOCK);
+ spin_unlock_irq(ha->host->host_lock);
WRT_REG_WORD(®->host_cmd, HC_SET_HOST_INT);
data = qla1280_debounce_register(®->istatus);
wait_for_completion(&wait);
del_timer_sync(&timer);
- spin_lock_irq(HOST_LOCK);
+ spin_lock_irq(ha->host->host_lock);
ha->mailbox_wait = NULL;
@@ -2770,9 +2586,9 @@
ha->bus_settings[bus].scsi_bus_dead = 1;
ha->bus_settings[bus].failed_reset_count++;
} else {
- spin_unlock_irq(HOST_LOCK);
+ spin_unlock_irq(ha->host->host_lock);
ssleep(reset_delay);
- spin_lock_irq(HOST_LOCK);
+ spin_lock_irq(ha->host->host_lock);
ha->bus_settings[bus].scsi_bus_dead = 0;
ha->bus_settings[bus].failed_reset_count = 0;
@@ -3078,7 +2894,7 @@
(SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
/* Enable simple tag queuing if device supports it. */
- if (DEV_SIMPLE_TAGS(cmd->device))
+ if (cmd->device->simple_tags)
pkt->control_flags |= cpu_to_le16(BIT_3);
/* Load SCSI command packet. */
@@ -3377,7 +3193,7 @@
(SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
/* Enable simple tag queuing if device supports it. */
- if (DEV_SIMPLE_TAGS(cmd->device))
+ if (cmd->device->simple_tags)
pkt->control_flags |= cpu_to_le16(BIT_3);
/* Load SCSI command packet. */
@@ -3889,50 +3705,6 @@
}
-#if LINUX_VERSION_CODE < 0x020500
-/*
- *
- */
-static void
-qla1280_get_target_options(struct scsi_cmnd *cmd, struct scsi_qla_host *ha)
-{
- unsigned char *result;
- struct nvram *n;
- int bus, target, lun;
-
- bus = SCSI_BUS_32(cmd);
- target = SCSI_TCN_32(cmd);
- lun = SCSI_LUN_32(cmd);
-
- /*
- * Make sure to not touch anything if someone is using the
- * sg interface.
- */
- if (cmd->use_sg || (CMD_RESULT(cmd) >> 16) != DID_OK || lun)
- return;
-
- result = cmd->request_buffer;
- n = &ha->nvram;
-
- n->bus[bus].target[target].parameter.enable_wide = 0;
- n->bus[bus].target[target].parameter.enable_sync = 0;
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
-
- if (result[7] & 0x60)
- n->bus[bus].target[target].parameter.enable_wide = 1;
- if (result[7] & 0x10)
- n->bus[bus].target[target].parameter.enable_sync = 1;
- if ((result[2] >= 3) && (result[4] + 5 > 56) &&
- (result[56] & 0x4))
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
-
- dprintk(2, "get_target_options(): wide %i, sync %i, ppr %i\n",
- n->bus[bus].target[target].parameter.enable_wide,
- n->bus[bus].target[target].parameter.enable_sync,
- n->bus[bus].target[target].ppr_1x160.flags.enable_ppr);
-}
-#endif
-
/*
* qla1280_status_entry
* Processes received ISP status entry.
@@ -4271,7 +4043,7 @@
} else
printk(" Async");
- if (DEV_SIMPLE_TAGS(device))
+ if (device->simple_tags)
printk(", Tagged queuing: depth %d", device->queue_depth);
printk("\n");
}
@@ -4485,7 +4257,7 @@
return ret;
}
-#if LINUX_VERSION_CODE >= 0x020600
+
static struct scsi_host_template qla1280_driver_template = {
.module = THIS_MODULE,
.proc_name = "qla1280",
@@ -4504,27 +4276,7 @@
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
};
-#else
-static struct scsi_host_template qla1280_driver_template = {
- .proc_name = "qla1280",
- .name = "Qlogic ISP 1280/12160",
- .detect = qla1280_detect,
- .release = qla1280_release,
- .info = qla1280_info,
- .queuecommand = qla1280_queuecommand,
- .eh_abort_handler = qla1280_eh_abort,
- .eh_device_reset_handler= qla1280_eh_device_reset,
- .eh_bus_reset_handler = qla1280_eh_bus_reset,
- .eh_host_reset_handler = qla1280_eh_adapter_reset,
- .bios_param = qla1280_biosparam_old,
- .can_queue = 0xfffff,
- .this_id = -1,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING,
- .use_new_eh_code = 1,
-};
-#endif
+
static int __devinit
qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -4615,10 +4367,6 @@
host->max_sectors = 1024;
host->unique_id = host->host_no;
-#if LINUX_VERSION_CODE < 0x020545
- host->select_queue_depths = qla1280_select_queue_depth;
-#endif
-
error = -ENODEV;
#if MEMORY_MAPPED_IO
@@ -4666,21 +4414,15 @@
pci_set_drvdata(pdev, host);
-#if LINUX_VERSION_CODE >= 0x020600
error = scsi_add_host(host, &pdev->dev);
if (error)
goto error_disable_adapter;
scsi_scan_host(host);
-#else
- scsi_set_pci_device(host, pdev);
-#endif
return 0;
-#if LINUX_VERSION_CODE >= 0x020600
error_disable_adapter:
qla1280_disable_intrs(ha);
-#endif
error_free_irq:
free_irq(pdev->irq, ha);
error_release_region:
@@ -4712,9 +4454,7 @@
struct Scsi_Host *host = pci_get_drvdata(pdev);
struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
-#if LINUX_VERSION_CODE >= 0x020600
scsi_remove_host(host);
-#endif
qla1280_disable_intrs(ha);
@@ -4738,7 +4478,6 @@
scsi_host_put(host);
}
-#if LINUX_VERSION_CODE >= 0x020600
static struct pci_driver qla1280_pci_driver = {
.name = "qla1280",
.id_table = qla1280_pci_tbl,
@@ -4784,10 +4523,6 @@
module_init(qla1280_init);
module_exit(qla1280_exit);
-#else
-# define driver_template qla1280_driver_template
-# include "scsi_module.c"
-#endif
MODULE_AUTHOR("Qlogic & Jes Sorensen");
MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 79d8a91..bad066e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1680,7 +1680,8 @@
uint8_t mp_byte; /* multi-path byte (not used) */
uint8_t cur_path; /* current path id */
- struct fc_rport *rport;
+ spinlock_t rport_lock;
+ struct fc_rport *rport, *drport;
u32 supported_classes;
struct work_struct rport_add_work;
struct work_struct rport_del_work;
@@ -2270,6 +2271,7 @@
#define LOOP_RESET_NEEDED 24
#define BEACON_BLINK_NEEDED 25
#define REGISTER_FDMI_NEEDED 26
+#define FCPORT_UPDATE_NEEDED 27
uint32_t device_flags;
#define DFLG_LOCAL_DEVICES BIT_0
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 32be4c1..35266bd 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -47,9 +47,11 @@
extern void qla2x00_restart_queues(scsi_qla_host_t *, uint8_t);
extern void qla2x00_rescan_fcports(scsi_qla_host_t *);
+extern void qla2x00_update_fcports(scsi_qla_host_t *);
extern int qla2x00_abort_isp(scsi_qla_host_t *);
+extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *);
/*
@@ -70,8 +72,8 @@
extern void qla2x00_cmd_timeout(srb_t *);
-extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int);
-extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *);
+extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int);
+extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *, int);
extern void qla2x00_blink_led(scsi_qla_host_t *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a91fea6..e67bb09 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -32,7 +32,6 @@
static int qla2x00_configure_hba(scsi_qla_host_t *);
static int qla2x00_configure_loop(scsi_qla_host_t *);
static int qla2x00_configure_local_loop(scsi_qla_host_t *);
-static void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
static int qla2x00_configure_fabric(scsi_qla_host_t *);
static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *);
static int qla2x00_device_resync(scsi_qla_host_t *);
@@ -1688,10 +1687,16 @@
qla2x00_rport_del(void *data)
{
fc_port_t *fcport = data;
+ struct fc_rport *rport;
+ unsigned long flags;
- if (fcport->rport)
- fc_remote_port_delete(fcport->rport);
- fcport->rport = NULL;
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ rport = fcport->drport;
+ fcport->drport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ if (rport)
+ fc_remote_port_delete(rport);
+
}
/**
@@ -1719,6 +1724,7 @@
atomic_set(&fcport->state, FCS_UNCONFIGURED);
fcport->flags = FCF_RLC_SUPPORT;
fcport->supported_classes = FC_COS_UNSPECIFIED;
+ spin_lock_init(&fcport->rport_lock);
INIT_WORK(&fcport->rport_add_work, qla2x00_rport_add, fcport);
INIT_WORK(&fcport->rport_del_work, qla2x00_rport_del, fcport);
@@ -2008,7 +2014,7 @@
{
fc_port_t *fcport;
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
list_for_each_entry(fcport, &ha->fcports, list) {
if (fcport->port_type != FCT_TARGET)
continue;
@@ -2032,13 +2038,9 @@
* Context:
* Kernel context.
*/
-static void
+void
qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
{
- uint16_t index;
- unsigned long flags;
- srb_t *sp;
-
fcport->ha = ha;
fcport->login_retry = 0;
fcport->port_login_retry_count = ha->port_down_retry_count *
@@ -2047,28 +2049,6 @@
PORT_RETRY_TIME);
fcport->flags &= ~FCF_LOGIN_NEEDED;
- /*
- * Check for outstanding cmd on tape Bypass LUN discovery if active
- * command on tape.
- */
- if (fcport->flags & FCF_TAPE_PRESENT) {
- spin_lock_irqsave(&ha->hardware_lock, flags);
- for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) {
- fc_port_t *sfcp;
-
- if ((sp = ha->outstanding_cmds[index]) != 0) {
- sfcp = sp->fcport;
- if (sfcp == fcport) {
- atomic_set(&fcport->state, FCS_ONLINE);
- spin_unlock_irqrestore(
- &ha->hardware_lock, flags);
- return;
- }
- }
- }
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- }
-
if (fcport->port_type == FCT_INITIATOR ||
fcport->port_type == FCT_BROADCAST)
fcport->device_type = TYPE_PROCESSOR;
@@ -2084,24 +2064,29 @@
{
struct fc_rport_identifiers rport_ids;
struct fc_rport *rport;
+ unsigned long flags;
- if (fcport->rport) {
- fc_remote_port_delete(fcport->rport);
- fcport->rport = NULL;
- }
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
+ if (fcport->rport)
+ return;
rport_ids.node_name = wwn_to_u64(fcport->node_name);
rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
- fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids);
+ rport = fc_remote_port_add(ha->host, 0, &rport_ids);
if (!rport) {
qla_printk(KERN_WARNING, ha,
"Unable to allocate fc remote port!\n");
return;
}
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->rport = rport;
*((fc_port_t **)rport->dd_data) = fcport;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+
rport->supported_classes = fcport->supported_classes;
rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
@@ -2217,12 +2202,11 @@
if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
qla2x00_mark_device_lost(ha, fcport,
- ql2xplogiabsentdevice);
+ ql2xplogiabsentdevice, 0);
if (fcport->loop_id != FC_NO_LOOP_ID &&
(fcport->flags & FCF_TAPE_PRESENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
-
ha->isp_ops.fabric_logout(ha,
fcport->loop_id,
fcport->d_id.b.domain,
@@ -2694,7 +2678,8 @@
if (atomic_read(&fcport->state) == FCS_ONLINE) {
if (format != 3 ||
fcport->port_type != FCT_INITIATOR) {
- qla2x00_mark_device_lost(ha, fcport, 0);
+ qla2x00_mark_device_lost(ha, fcport,
+ 0, 0);
}
}
fcport->flags &= ~FCF_FARP_DONE;
@@ -2741,8 +2726,7 @@
ha->isp_ops.fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
- qla2x00_mark_device_lost(ha, fcport, 1);
-
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
} else {
qla2x00_update_fcport(ha, fcport);
}
@@ -2855,7 +2839,7 @@
ha->isp_ops.fabric_logout(ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
- qla2x00_mark_device_lost(ha, fcport, 1);
+ qla2x00_mark_device_lost(ha, fcport, 1, 0);
rval = 1;
break;
@@ -2990,6 +2974,17 @@
qla2x00_probe_for_all_luns(ha);
}
+void
+qla2x00_update_fcports(scsi_qla_host_t *ha)
+{
+ fc_port_t *fcport;
+
+ /* Go with deferred removal of rport references. */
+ list_for_each_entry(fcport, &ha->fcports, list)
+ if (fcport->drport)
+ qla2x00_rport_del(fcport);
+}
+
/*
* qla2x00_abort_isp
* Resets ISP and aborts all outstanding commands.
@@ -3019,7 +3014,7 @@
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 0);
} else {
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index f63af08..71a46fc 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -389,7 +389,7 @@
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
@@ -432,7 +432,7 @@
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
ha->device_flags |= DFLG_NO_CABLE;
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
ha->flags.management_server_logged_in = 0;
@@ -453,7 +453,7 @@
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
@@ -482,7 +482,7 @@
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
if (!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
@@ -506,7 +506,7 @@
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
LOOP_DOWN_TIME);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
}
set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
@@ -580,7 +580,7 @@
*/
atomic_set(&ha->loop_state, LOOP_UP);
- qla2x00_mark_all_devices_lost(ha);
+ qla2x00_mark_all_devices_lost(ha, 1);
ha->flags.rscn_queue_overflow = 1;
@@ -1091,7 +1091,7 @@
cp->result = DID_BUS_BUSY << 16;
if (atomic_read(&fcport->state) == FCS_ONLINE) {
- qla2x00_mark_device_lost(ha, fcport, 1);
+ qla2x00_mark_device_lost(ha, fcport, 1, 1);
}
break;
@@ -1135,7 +1135,7 @@
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
- qla2x00_mark_device_lost(ha, fcport, 1);
+ qla2x00_mark_device_lost(ha, fcport, 1, 1);
break;
case CS_QUEUE_FULL:
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4916847..5866a7c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -756,7 +756,7 @@
if (ret == SUCCESS) {
if (fcport->flags & FC_FABRIC_DEVICE) {
ha->isp_ops.fabric_logout(ha, fcport->loop_id);
- qla2x00_mark_device_lost(ha, fcport);
+ qla2x00_mark_device_lost(ha, fcport, 0, 0);
}
}
#endif
@@ -1642,6 +1642,31 @@
pci_disable_device(ha->pdev);
}
+static inline void
+qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
+ int defer)
+{
+ unsigned long flags;
+ struct fc_rport *rport;
+
+ if (!fcport->rport)
+ return;
+
+ rport = fcport->rport;
+ if (defer) {
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->drport = rport;
+ fcport->rport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
+ } else {
+ spin_lock_irqsave(&fcport->rport_lock, flags);
+ fcport->rport = NULL;
+ spin_unlock_irqrestore(&fcport->rport_lock, flags);
+ fc_remote_port_delete(rport);
+ }
+}
+
/*
* qla2x00_mark_device_lost Updates fcport state when device goes offline.
*
@@ -1652,10 +1677,10 @@
* Context:
*/
void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
- int do_login)
+ int do_login, int defer)
{
- if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport)
- schedule_work(&fcport->rport_del_work);
+ if (atomic_read(&fcport->state) == FCS_ONLINE)
+ qla2x00_schedule_rport_del(ha, fcport, defer);
/*
* We may need to retry the login, so don't change the state of the
@@ -1702,7 +1727,7 @@
* Context:
*/
void
-qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha)
+qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
{
fc_port_t *fcport;
@@ -1716,10 +1741,13 @@
*/
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
continue;
- if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport)
- schedule_work(&fcport->rport_del_work);
+ if (atomic_read(&fcport->state) == FCS_ONLINE)
+ qla2x00_schedule_rport_del(ha, fcport, defer);
atomic_set(&fcport->state, FCS_DEVICE_LOST);
}
+
+ if (defer && ha->dpc_wait && !ha->dpc_active)
+ up(ha->dpc_wait);
}
/*
@@ -2161,6 +2189,9 @@
ha->host_no));
}
+ if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
+ qla2x00_update_fcports(ha);
+
if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
ha->host_no));
@@ -2219,13 +2250,8 @@
DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
ha->host_no, fcport->loop_id));
- fcport->port_login_retry_count =
- ha->port_down_retry_count * PORT_RETRY_TIME;
- atomic_set(&fcport->state, FCS_ONLINE);
- atomic_set(&fcport->port_down_timer,
- ha->port_down_retry_count * PORT_RETRY_TIME);
-
- fcport->login_retry = 0;
+ qla2x00_update_fcport(ha,
+ fcport);
} else if (status == 1) {
set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
/* retry the login again */
@@ -2469,6 +2495,7 @@
if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
+ test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
start_dpc ||
test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index a2333d2..5cc97b7 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1350,7 +1350,7 @@
cmnd[4] = SCSI_REMOVAL_PREVENT;
cmnd[5] = 0;
- scsi_execute_async(sdev, cmnd, DMA_NONE, NULL, 0, 0, 10 * HZ,
+ scsi_execute_async(sdev, cmnd, 6, DMA_NONE, NULL, 0, 0, 10 * HZ,
5, NULL, NULL, GFP_KERNEL);
}
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 3574ba9..4a60285 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -436,6 +436,7 @@
* scsi_execute_async - insert request
* @sdev: scsi device
* @cmd: scsi command
+ * @cmd_len: length of scsi cdb
* @data_direction: data direction
* @buffer: data buffer (this can be a kernel buffer or scatterlist)
* @bufflen: len of buffer
@@ -445,7 +446,7 @@
* @flags: or into request flags
**/
int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd,
- int data_direction, void *buffer, unsigned bufflen,
+ int cmd_len, int data_direction, void *buffer, unsigned bufflen,
int use_sg, int timeout, int retries, void *privdata,
void (*done)(void *, char *, int, int), gfp_t gfp)
{
@@ -472,7 +473,7 @@
if (err)
goto free_req;
- req->cmd_len = COMMAND_SIZE(cmd[0]);
+ req->cmd_len = cmd_len;
memcpy(req->cmd, cmd, req->cmd_len);
req->sense = sioc->sense;
req->sense_len = 0;
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index a3e0b7b..210dab5 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -377,7 +377,7 @@
/**
* sas_phy_alloc -- allocates and initialize a SAS PHY structure
* @parent: Parent device
- * @number: Port number
+ * @number: Phy index
*
* Allocates an SAS PHY structure. It will be added in the device tree
* below the device specified by @parent, which has to be either a Scsi_Host
@@ -595,8 +595,8 @@
device_initialize(&rphy->dev);
rphy->dev.parent = get_device(&parent->dev);
rphy->dev.release = sas_rphy_release;
- sprintf(rphy->dev.bus_id, "rphy-%d:%d",
- shost->host_no, parent->number);
+ sprintf(rphy->dev.bus_id, "rphy-%d:%d-%d",
+ shost->host_no, parent->port_identifier, parent->number);
transport_setup_device(&rphy->dev);
return rphy;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 78aad95..7d07000 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -741,7 +741,7 @@
hp->duration = jiffies_to_msecs(jiffies);
/* Now send everything of to mid-level. The next time we hear about this
packet is when sg_cmd_done() is called (i.e. a callback). */
- if (scsi_execute_async(sdp->device, cmnd, data_dir, srp->data.buffer,
+ if (scsi_execute_async(sdp->device, cmnd, hp->cmd_len, data_dir, srp->data.buffer,
hp->dxfer_len, srp->data.k_use_sg, timeout,
SG_DEFAULT_RETRIES, srp, sg_cmd_done,
GFP_ATOMIC)) {
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 13b1d3a..7f96f33 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -508,7 +508,7 @@
STp->buffer->cmdstat.have_sense = 0;
STp->buffer->syscall_result = 0;
- if (scsi_execute_async(STp->device, cmd, direction,
+ if (scsi_execute_async(STp->device, cmd, COMMAND_SIZE(cmd[0]), direction,
&((STp->buffer)->sg[0]), bytes, (STp->buffer)->sg_segs,
timeout, retries, SRpnt, st_sleep_done, GFP_KERNEL)) {
/* could not allocate the buffer or request was too large */
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 221999b..7aef751 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -366,7 +366,7 @@
.irq = NO_IRQ,
.fifosize = 16,
.ops = &serial21285_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
};
static void serial21285_setup_ports(void)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index bc36edf..179c1f0 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -31,7 +31,6 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
-#include <linux/mca.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
@@ -2027,12 +2026,6 @@
int ret;
/*
- * Don't probe for MCA ports on non-MCA machines.
- */
- if (up->port.flags & UPF_BOOT_ONLYMCA && !MCA_bus)
- return;
-
- /*
* Find the region that we can probe for. This in turn
* tells us whether we can probe for the type of port.
*/
@@ -2164,7 +2157,7 @@
/*
* Wait for transmitter & holding register to empty
*/
-static inline void wait_for_xmitr(struct uart_8250_port *up)
+static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
{
unsigned int status, tmout = 10000;
@@ -2178,7 +2171,7 @@
if (--tmout == 0)
break;
udelay(1);
- } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+ } while ((status & bits) != bits);
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
@@ -2218,7 +2211,7 @@
* Now, do each character
*/
for (i = 0; i < count; i++, s++) {
- wait_for_xmitr(up);
+ wait_for_xmitr(up, UART_LSR_THRE);
/*
* Send the character out.
@@ -2226,7 +2219,7 @@
*/
serial_out(up, UART_TX, *s);
if (*s == 10) {
- wait_for_xmitr(up);
+ wait_for_xmitr(up, UART_LSR_THRE);
serial_out(up, UART_TX, 13);
}
}
@@ -2235,8 +2228,8 @@
* Finally, wait for transmitter to become empty
* and restore the IER
*/
- wait_for_xmitr(up);
- serial_out(up, UART_IER, ier);
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_out(up, UART_IER, ier | UART_IER_THRI);
}
static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9fd1925d..0d38f0f 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -23,7 +23,7 @@
work.)
To compile this driver as a module, choose M here: the
- module will be called serial.
+ module will be called 8250.
[WARNING: Do not compile this driver as a module if you are using
non-standard serial ports, since the configuration information will
be lost when the driver is unloaded. This limitation may be lifted
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 3490022..429de27 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -566,7 +566,7 @@
.uartclk = 14745600,
.fifosize = 16,
.ops = &amba_pl010_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.dtr_mask = 1 << 5,
@@ -581,7 +581,7 @@
.uartclk = 14745600,
.fifosize = 16,
.ops = &amba_pl010_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.dtr_mask = 1 << 7,
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 8ef9994..ce7b2e4 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -410,7 +410,7 @@
.fifosize = 16,
.ops = &clps711x_pops,
.line = 0,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
},
{
.iobase = SYSCON2,
@@ -419,7 +419,7 @@
.fifosize = 16,
.ops = &clps711x_pops,
.line = 1,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
}
};
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 587cc6a..858048e 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -402,10 +402,10 @@
DRIVER_NAME, sport);
if (retval) goto error_out2;
- retval = request_irq(sport->rtsirq, imx_rtsint, 0,
+ retval = request_irq(sport->rtsirq, imx_rtsint,
+ SA_TRIGGER_FALLING | SA_TRIGGER_RISING,
DRIVER_NAME, sport);
if (retval) goto error_out3;
- set_irq_type(sport->rtsirq, IRQT_BOTHEDGE);
/*
* Finally, clear and enable interrupts
@@ -674,7 +674,7 @@
.irq = UART1_MINT_RX,
.uartclk = 16000000,
.fifosize = 8,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 0,
},
@@ -690,7 +690,7 @@
.irq = UART2_MINT_RX,
.uartclk = 16000000,
.fifosize = 8,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 1,
},
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index eb4883e..0a2dd6c 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1060,7 +1060,7 @@
dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
port->mapbase = res->start;
- port->membase = S3C24XX_VA_UART + (res->start - S3C2410_PA_UART);
+ port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
port->irq = platform_get_irq(platdev, 0);
ourport->clk = clk_get(&platdev->dev, "uart");
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 1bd9316..ff7b60b 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -665,21 +665,21 @@
sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0;
sa1100_ports[idx].port.mapbase = _Ser1UTCR0;
sa1100_ports[idx].port.irq = IRQ_Ser1UART;
- sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
break;
case 2:
sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0;
sa1100_ports[idx].port.mapbase = _Ser2UTCR0;
sa1100_ports[idx].port.irq = IRQ_Ser2ICP;
- sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
break;
case 3:
sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0;
sa1100_ports[idx].port.mapbase = _Ser3UTCR0;
sa1100_ports[idx].port.irq = IRQ_Ser3UART;
- sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF;
break;
default:
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 9437704..0717abf 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -332,7 +332,7 @@
struct termios *old, unsigned int min, unsigned int max)
{
unsigned int try, baud, altbaud = 38400;
- unsigned int flags = port->flags & UPF_SPD_MASK;
+ upf_t flags = port->flags & UPF_SPD_MASK;
if (flags == UPF_SPD_HI)
altbaud = 57600;
@@ -615,8 +615,9 @@
struct serial_struct new_serial;
struct uart_port *port = state->port;
unsigned long new_port;
- unsigned int change_irq, change_port, old_flags, closing_wait;
+ unsigned int change_irq, change_port, closing_wait;
unsigned int old_custom_divisor, close_delay;
+ upf_t old_flags, new_flags;
int retval = 0;
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
@@ -655,6 +656,7 @@
new_serial.type != port->type;
old_flags = port->flags;
+ new_flags = new_serial.flags;
old_custom_divisor = port->custom_divisor;
if (!capable(CAP_SYS_ADMIN)) {
@@ -664,10 +666,10 @@
(close_delay != state->close_delay) ||
(closing_wait != state->closing_wait) ||
(new_serial.xmit_fifo_size != port->fifosize) ||
- (((new_serial.flags ^ old_flags) & ~UPF_USR_MASK) != 0))
+ (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
goto exit;
port->flags = ((port->flags & ~UPF_USR_MASK) |
- (new_serial.flags & UPF_USR_MASK));
+ (new_flags & UPF_USR_MASK));
port->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
@@ -764,7 +766,7 @@
port->irq = new_serial.irq;
port->uartclk = new_serial.baud_base * 16;
port->flags = (port->flags & ~UPF_CHANGE_MASK) |
- (new_serial.flags & UPF_CHANGE_MASK);
+ (new_flags & UPF_CHANGE_MASK);
port->custom_divisor = new_serial.custom_divisor;
state->close_delay = close_delay;
state->closing_wait = closing_wait;
@@ -1870,7 +1872,7 @@
mutex_lock(&state->mutex);
if (state->info && state->info->flags & UIF_INITIALIZED) {
- struct uart_ops *ops = port->ops;
+ const struct uart_ops *ops = port->ops;
spin_lock_irq(&port->lock);
ops->stop_tx(port);
@@ -1932,7 +1934,7 @@
}
if (state->info && state->info->flags & UIF_INITIALIZED) {
- struct uart_ops *ops = port->ops;
+ const struct uart_ops *ops = port->ops;
int ret;
ops->set_mctrl(port, 0);
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index d4a1f0e..d0490f6 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -506,7 +506,7 @@
.uartclk = 14745600/2,
.fifosize = 16,
.ops = &lh7a40x_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
},
@@ -519,7 +519,7 @@
.uartclk = 14745600/2,
.fifosize = 16,
.ops = &lh7a40x_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
},
@@ -532,7 +532,7 @@
.uartclk = 14745600/2,
.fifosize = 16,
.ops = &lh7a40x_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
},
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index a9e0707..0111206 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1113,10 +1113,10 @@
.port = {
.membase = (void *)0xfffffe80,
.mapbase = 0xfffffe80,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
@@ -1128,10 +1128,10 @@
.port = {
.membase = (void *)SCIF0,
.mapbase = SCIF0,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 55,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1142,10 +1142,10 @@
.port = {
.membase = (void *)SCIF2,
.mapbase = SCIF2,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 59,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1157,10 +1157,10 @@
.port = {
.membase = (void *)0xfffffe80,
.mapbase = 0xfffffe80,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
@@ -1171,10 +1171,10 @@
.port = {
.membase = (void *)0xa4000150,
.mapbase = 0xa4000150,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 59,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1185,10 +1185,10 @@
.port = {
.membase = (void *)0xa4000140,
.mapbase = 0xa4000140,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 55,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_IRDA,
@@ -1200,10 +1200,10 @@
.port = {
.membase = (void *)0xA4430000,
.mapbase = 0xA4430000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1215,10 +1215,10 @@
.port = {
.membase = (void *)0xffe00000,
.mapbase = 0xffe00000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1230,10 +1230,10 @@
.port = {
.membase = (void *)0xffe80000,
.mapbase = 0xffe80000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 43,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1245,10 +1245,10 @@
.port = {
.membase = (void *)0xffe00000,
.mapbase = 0xffe00000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 25,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
@@ -1259,10 +1259,10 @@
.port = {
.membase = (void *)0xffe80000,
.mapbase = 0xffe80000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 43,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1274,10 +1274,10 @@
.port = {
.membase = (void *)0xfe600000,
.mapbase = 0xfe600000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 55,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1288,10 +1288,10 @@
.port = {
.membase = (void *)0xfe610000,
.mapbase = 0xfe610000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 75,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1302,10 +1302,10 @@
.port = {
.membase = (void *)0xfe620000,
.mapbase = 0xfe620000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 79,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_SCIF,
@@ -1317,10 +1317,10 @@
.port = {
.membase = (void *)0xffe80000,
.mapbase = 0xffe80000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 43,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1332,10 +1332,10 @@
.port = {
.membase = (void *)0xffe00000,
.mapbase = 0xffe00000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 26,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1346,10 +1346,10 @@
.port = {
.membase = (void *)0xffe80000,
.mapbase = 0xffe80000,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 43,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCIF,
@@ -1359,10 +1359,10 @@
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
{
.port = {
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 42,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCIF,
@@ -1374,10 +1374,10 @@
.port = {
.membase = (void *)0x00ffffb0,
.mapbase = 0x00ffffb0,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 54,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
@@ -1388,10 +1388,10 @@
.port = {
.membase = (void *)0x00ffffb8,
.mapbase = 0x00ffffb8,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 58,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCI,
@@ -1402,10 +1402,10 @@
.port = {
.membase = (void *)0x00ffffc0,
.mapbase = 0x00ffffc0,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 62,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_SCI,
@@ -1417,10 +1417,10 @@
.port = {
.membase = (void *)0x00ffff78,
.mapbase = 0x00ffff78,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 90,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
.type = PORT_SCI,
@@ -1431,10 +1431,10 @@
.port = {
.membase = (void *)0x00ffff80,
.mapbase = 0x00ffff80,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 94,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
.type = PORT_SCI,
@@ -1445,10 +1445,10 @@
.port = {
.membase = (void *)0x00ffff88,
.mapbase = 0x00ffff88,
- .iotype = SERIAL_IO_MEM,
+ .iotype = UPIO_MEM,
.irq = 98,
.ops = &sci_uart_ops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 2,
},
.type = PORT_SCI,
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 9a3665b..bc67442 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -669,7 +669,7 @@
* if it is, then bail out, because there's likely no UART
* here.
*/
- if (!(up->port.flags & ASYNC_BUGGY_UART) &&
+ if (!(up->port.flags & UPF_BUGGY_UART) &&
(serial_inp(up, UART_LSR) == 0xff)) {
printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
return -ENODEV;
@@ -707,7 +707,7 @@
up->ier = UART_IER_RLSI | UART_IER_RDI;
serial_outp(up, UART_IER, up->ier);
- if (up->port.flags & ASYNC_FOURPORT) {
+ if (up->port.flags & UPF_FOURPORT) {
unsigned int icp;
/*
* Enable interrupts on the AST Fourport board
@@ -740,7 +740,7 @@
serial_outp(up, UART_IER, 0);
spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.flags & ASYNC_FOURPORT) {
+ if (up->port.flags & UPF_FOURPORT) {
/* reset interrupts on the AST Fourport board */
inb((up->port.iobase & 0xfe0) | 0x1f);
up->port.mctrl |= TIOCM_OUT1;
@@ -1132,7 +1132,7 @@
spin_lock_irqsave(&up->port.lock, flags);
- if (!(up->port.flags & ASYNC_BUGGY_UART)) {
+ if (!(up->port.flags & UPF_BUGGY_UART)) {
/*
* Do a simple existence test first; if we fail this, there's
* no point trying anything else.
@@ -1170,7 +1170,7 @@
* manufacturer would be stupid enough to design a board
* that conflicts with COM 1-4 --- we hope!
*/
- if (!(up->port.flags & ASYNC_SKIP_TEST)) {
+ if (!(up->port.flags & UPF_SKIP_TEST)) {
serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
status1 = serial_inp(up, UART_MSR) & 0xF0;
serial_outp(up, UART_MCR, save_mcr);
@@ -1371,7 +1371,7 @@
} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
/* Wait up to 1s for flow control if necessary */
- if (up->port.flags & ASYNC_CONS_FLOW) {
+ if (up->port.flags & UPF_CONS_FLOW) {
tmout = 1000000;
while (--tmout &&
((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
@@ -1513,7 +1513,7 @@
up->su_type == SU_PORT_KBD)
continue;
- up->port.flags |= ASYNC_BOOT_AUTOCONF;
+ up->port.flags |= UPF_BOOT_AUTOCONF;
up->port.type = PORT_UNKNOWN;
up->port.uartclk = (SU_BASE_BAUD * 16);
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 3639c3f..36e476d 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_USB_DABUSB) += media/
obj-$(CONFIG_USB_DSBR) += media/
+obj-$(CONFIG_USB_ET61X251) += media/
obj-$(CONFIG_USB_IBMCAM) += media/
obj-$(CONFIG_USB_KONICAWC) += media/
obj-$(CONFIG_USB_OV511) += media/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index af0a41e..04631dc 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -36,6 +36,7 @@
#include <linux/init.h>
#include <linux/device.h> /* FIXME: linux/firmware.h should include it itself */
#include <linux/firmware.h>
+#include <linux/mutex.h>
#include "usbatm.h"
@@ -160,7 +161,7 @@
struct work_struct poll_work;
/* contol handles */
- struct semaphore cm_serialize;
+ struct mutex cm_serialize;
u8 *rcv_buf;
u8 *snd_buf;
struct urb *rcv_urb;
@@ -219,7 +220,7 @@
goto fail;
}
- down(&instance->cm_serialize);
+ mutex_lock(&instance->cm_serialize);
/* submit reading urb before the writing one */
init_completion(&instance->rcv_done);
@@ -288,7 +289,7 @@
ret = offd;
dbg("cm %#x", cm);
fail:
- up(&instance->cm_serialize);
+ mutex_unlock(&instance->cm_serialize);
return ret;
}
@@ -352,7 +353,6 @@
struct atm_dev *atm_dev)
{
struct cxacru_data *instance = usbatm_instance->driver_data;
- struct device *dev = &usbatm_instance->usb_intf->dev;
/*
struct atm_dev *atm_dev = usbatm_instance->atm_dev;
*/
@@ -364,14 +364,14 @@
ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
atm_dev->esi, sizeof(atm_dev->esi));
if (ret < 0) {
- dev_err(dev, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
+ atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
return ret;
}
/* start ADSL */
ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
if (ret < 0) {
- dev_err(dev, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
+ atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
return ret;
}
@@ -383,13 +383,13 @@
static void cxacru_poll_status(struct cxacru_data *instance)
{
u32 buf[CXINF_MAX] = {};
- struct device *dev = &instance->usbatm->usb_intf->dev;
- struct atm_dev *atm_dev = instance->usbatm->atm_dev;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct atm_dev *atm_dev = usbatm->atm_dev;
int ret;
ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX);
if (ret < 0) {
- dev_warn(dev, "poll status: error %d\n", ret);
+ atm_warn(usbatm, "poll status: error %d\n", ret);
goto reschedule;
}
@@ -400,50 +400,50 @@
switch (instance->line_status) {
case 0:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: down\n");
+ atm_info(usbatm, "ADSL line: down\n");
break;
case 1:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: attemtping to activate\n");
+ atm_info(usbatm, "ADSL line: attempting to activate\n");
break;
case 2:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: training\n");
+ atm_info(usbatm, "ADSL line: training\n");
break;
case 3:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: channel analysis\n");
+ atm_info(usbatm, "ADSL line: channel analysis\n");
break;
case 4:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: exchange\n");
+ atm_info(usbatm, "ADSL line: exchange\n");
break;
case 5:
atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
atm_dev->signal = ATM_PHY_SIG_FOUND;
- dev_info(dev, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
+ atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
break;
case 6:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: waiting\n");
+ atm_info(usbatm, "ADSL line: waiting\n");
break;
case 7:
atm_dev->signal = ATM_PHY_SIG_LOST;
- dev_info(dev, "ADSL line: initializing\n");
+ atm_info(usbatm, "ADSL line: initializing\n");
break;
default:
atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
- dev_info(dev, "Unknown line state %02x\n", instance->line_status);
+ atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
break;
}
reschedule:
@@ -504,8 +504,8 @@
{
int ret;
int off;
- struct usb_device *usb_dev = instance->usbatm->usb_dev;
- struct device *dev = &instance->usbatm->usb_intf->dev;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct usb_device *usb_dev = usbatm->usb_dev;
u16 signature[] = { usb_dev->descriptor.idVendor, usb_dev->descriptor.idProduct };
u32 val;
@@ -515,7 +515,7 @@
val = cpu_to_le32(instance->modem_type->pll_f_clk);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4);
if (ret) {
- dev_err(dev, "FirmwarePllFClkValue failed: %d\n", ret);
+ usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret);
return;
}
@@ -523,7 +523,7 @@
val = cpu_to_le32(instance->modem_type->pll_b_clk);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4);
if (ret) {
- dev_err(dev, "FirmwarePllBClkValue failed: %d\n", ret);
+ usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret);
return;
}
@@ -531,14 +531,14 @@
val = cpu_to_le32(SDRAM_ENA);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4);
if (ret) {
- dev_err(dev, "Enable SDRAM failed: %d\n", ret);
+ usb_err(usbatm, "Enable SDRAM failed: %d\n", ret);
return;
}
/* Firmware */
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size);
if (ret) {
- dev_err(dev, "Firmware upload failed: %d\n", ret);
+ usb_err(usbatm, "Firmware upload failed: %d\n", ret);
return;
}
@@ -546,7 +546,7 @@
if (instance->modem_type->boot_rom_patch) {
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size);
if (ret) {
- dev_err(dev, "Boot ROM patching failed: %d\n", ret);
+ usb_err(usbatm, "Boot ROM patching failed: %d\n", ret);
return;
}
}
@@ -554,7 +554,7 @@
/* Signature */
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4);
if (ret) {
- dev_err(dev, "Signature storing failed: %d\n", ret);
+ usb_err(usbatm, "Signature storing failed: %d\n", ret);
return;
}
@@ -566,7 +566,7 @@
ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
}
if (ret) {
- dev_err(dev, "Passing control to firmware failed: %d\n", ret);
+ usb_err(usbatm, "Passing control to firmware failed: %d\n", ret);
return;
}
@@ -580,7 +580,7 @@
ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
if (ret < 0) {
- dev_err(dev, "modem failed to initialize: %d\n", ret);
+ usb_err(usbatm, "modem failed to initialize: %d\n", ret);
return;
}
@@ -597,7 +597,7 @@
ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
(u8 *) buf, len, NULL, 0);
if (ret < 0) {
- dev_err(dev, "load config data failed: %d\n", ret);
+ usb_err(usbatm, "load config data failed: %d\n", ret);
return;
}
}
@@ -608,18 +608,19 @@
static int cxacru_find_firmware(struct cxacru_data *instance,
char* phase, const struct firmware **fw_p)
{
- struct device *dev = &instance->usbatm->usb_intf->dev;
+ struct usbatm_data *usbatm = instance->usbatm;
+ struct device *dev = &usbatm->usb_intf->dev;
char buf[16];
sprintf(buf, "cxacru-%s.bin", phase);
dbg("cxacru_find_firmware: looking for %s", buf);
if (request_firmware(fw_p, buf, dev)) {
- dev_dbg(dev, "no stage %s firmware found\n", phase);
+ usb_dbg(usbatm, "no stage %s firmware found\n", phase);
return -ENOENT;
}
- dev_info(dev, "found firmware %s\n", buf);
+ usb_info(usbatm, "found firmware %s\n", buf);
return 0;
}
@@ -627,20 +628,19 @@
static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
struct usb_interface *usb_intf)
{
- struct device *dev = &usbatm_instance->usb_intf->dev;
const struct firmware *fw, *bp, *cf;
struct cxacru_data *instance = usbatm_instance->driver_data;
int ret = cxacru_find_firmware(instance, "fw", &fw);
if (ret) {
- dev_warn(dev, "firmware (cxacru-fw.bin) unavailable (hotplug misconfiguration?)\n");
+ usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n");
return ret;
}
if (instance->modem_type->boot_rom_patch) {
ret = cxacru_find_firmware(instance, "bp", &bp);
if (ret) {
- dev_warn(dev, "boot ROM patch (cxacru-bp.bin) unavailable (hotplug misconfiguration?)\n");
+ usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n");
release_firmware(fw);
return ret;
}
@@ -667,22 +667,19 @@
}
static int cxacru_bind(struct usbatm_data *usbatm_instance,
- struct usb_interface *intf, const struct usb_device_id *id,
- int *need_heavy_init)
+ struct usb_interface *intf, const struct usb_device_id *id)
{
struct cxacru_data *instance;
struct usb_device *usb_dev = interface_to_usbdev(intf);
int ret;
/* instance init */
- instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+ instance = kzalloc(sizeof(*instance), GFP_KERNEL);
if (!instance) {
dbg("cxacru_bind: no memory for instance data");
return -ENOMEM;
}
- memset(instance, 0, sizeof(*instance));
-
instance->usbatm = usbatm_instance;
instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
@@ -721,13 +718,13 @@
instance->snd_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->snd_done, 4);
- init_MUTEX(&instance->cm_serialize);
+ mutex_init(&instance->cm_serialize);
INIT_WORK(&instance->poll_work, (void *)cxacru_poll_status, instance);
usbatm_instance->driver_data = instance;
- *need_heavy_init = cxacru_card_status(instance);
+ usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT);
return 0;
@@ -787,12 +784,12 @@
{ /* V = Conexant P = ADSL modem (Hasbani project) */
USB_DEVICE(0x0572, 0xcb00), .driver_info = (unsigned long) &cxacru_cb00
},
- { /* V = Conexant P = ADSL modem (Well PTI-800 */
- USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00
- },
{ /* V = Conexant P = ADSL modem */
USB_DEVICE(0x0572, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
},
+ { /* V = Conexant P = ADSL modem (Well PTI-800) */
+ USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00
+ },
{ /* V = Conexant P = ADSL modem */
USB_DEVICE(0x0572, 0xcb06), .driver_info = (unsigned long) &cxacru_cb00
},
@@ -835,14 +832,13 @@
MODULE_DEVICE_TABLE(usb, cxacru_usb_ids);
static struct usbatm_driver cxacru_driver = {
- .owner = THIS_MODULE,
.driver_name = cxacru_driver_name,
.bind = cxacru_bind,
.heavy_init = cxacru_heavy_init,
.unbind = cxacru_unbind,
.atm_start = cxacru_atm_start,
- .in = CXACRU_EP_DATA,
- .out = CXACRU_EP_DATA,
+ .bulk_in = CXACRU_EP_DATA,
+ .bulk_out = CXACRU_EP_DATA,
.rx_padding = 3,
.tx_padding = 11,
};
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index c1b47d7..7860c8a 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -35,12 +35,14 @@
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/usb_ch9.h>
#include <linux/workqueue.h>
#include "usbatm.h"
#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
-#define DRIVER_VERSION "1.9"
+#define DRIVER_VERSION "1.10"
#define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION
static const char speedtch_driver_name[] = "speedtch";
@@ -66,31 +68,42 @@
#define RESUBMIT_DELAY 1000 /* milliseconds */
-#define DEFAULT_ALTSETTING 1
+#define DEFAULT_BULK_ALTSETTING 1
+#define DEFAULT_ISOC_ALTSETTING 2
#define DEFAULT_DL_512_FIRST 0
+#define DEFAULT_ENABLE_ISOC 0
#define DEFAULT_SW_BUFFERING 0
-static int altsetting = DEFAULT_ALTSETTING;
+static unsigned int altsetting = 0; /* zero means: use the default */
static int dl_512_first = DEFAULT_DL_512_FIRST;
+static int enable_isoc = DEFAULT_ENABLE_ISOC;
static int sw_buffering = DEFAULT_SW_BUFFERING;
-module_param(altsetting, int, S_IRUGO | S_IWUSR);
+module_param(altsetting, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(altsetting,
- "Alternative setting for data interface (default: "
- __MODULE_STRING(DEFAULT_ALTSETTING) ")");
+ "Alternative setting for data interface (bulk_default: "
+ __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
+ __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dl_512_first,
"Read 512 bytes before sending firmware (default: "
__MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
+module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_isoc,
+ "Use isochronous transfers if available (default: "
+ __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
+
module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(sw_buffering,
"Enable software buffering (default: "
__MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
+#define INTERFACE_DATA 1
#define ENDPOINT_INT 0x81
-#define ENDPOINT_DATA 0x07
+#define ENDPOINT_BULK_DATA 0x07
+#define ENDPOINT_ISOC_DATA 0x07
#define ENDPOINT_FIRMWARE 0x05
#define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
@@ -98,6 +111,8 @@
struct speedtch_instance_data {
struct usbatm_data *usbatm;
+ unsigned int altsetting;
+
struct work_struct status_checker;
unsigned char last_status;
@@ -205,7 +220,7 @@
buffer, 0x200, &actual_length, 2000);
if (ret < 0 && ret != -ETIMEDOUT)
- usb_dbg(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
+ usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
else
usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
}
@@ -219,7 +234,7 @@
buffer, thislen, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
- usb_dbg(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
+ usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
goto out_free;
}
usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
@@ -232,7 +247,7 @@
buffer, 0x200, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
- usb_dbg(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
+ usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
goto out_free;
}
usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
@@ -246,7 +261,7 @@
buffer, thislen, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
- usb_dbg(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
+ usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
goto out_free;
}
}
@@ -259,7 +274,7 @@
buffer, 0x200, &actual_length, DATA_TIMEOUT);
if (ret < 0) {
- usb_dbg(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
+ usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
goto out_free;
}
@@ -270,6 +285,11 @@
because we're in our own kernel thread anyway. */
msleep_interruptible(1000);
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
+ usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->altsetting, ret);
+ goto out_free;
+ }
+
/* Enable software buffering, if requested */
if (sw_buffering)
speedtch_set_swbuff(instance, 1);
@@ -285,8 +305,8 @@
return ret;
}
-static int speedtch_find_firmware(struct usb_interface *intf, int phase,
- const struct firmware **fw_p)
+static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf,
+ int phase, const struct firmware **fw_p)
{
struct device *dev = &intf->dev;
const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
@@ -295,24 +315,24 @@
char buf[24];
sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
- dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+ usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
- dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+ usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
sprintf(buf, "speedtch-%d.bin", phase);
- dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+ usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
if (request_firmware(fw_p, buf, dev)) {
- dev_warn(dev, "no stage %d firmware found!\n", phase);
+ usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase);
return -ENOENT;
}
}
}
- dev_info(dev, "found stage %d firmware %s\n", phase, buf);
+ usb_info(usbatm, "found stage %d firmware %s\n", phase, buf);
return 0;
}
@@ -323,15 +343,16 @@
struct speedtch_instance_data *instance = usbatm->driver_data;
int ret;
- if ((ret = speedtch_find_firmware(intf, 1, &fw1)) < 0)
- return ret;
+ if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0)
+ return ret;
- if ((ret = speedtch_find_firmware(intf, 2, &fw2)) < 0) {
+ if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) {
release_firmware(fw1);
return ret;
}
- ret = speedtch_upload_firmware(instance, fw1, fw2);
+ if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0)
+ usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret);
release_firmware(fw2);
release_firmware(fw1);
@@ -428,7 +449,9 @@
int down_speed, up_speed, ret;
unsigned char status;
+#ifdef VERBOSE_DEBUG
atm_dbg(usbatm, "%s entered\n", __func__);
+#endif
ret = speedtch_read_status(instance);
if (ret < 0) {
@@ -441,9 +464,9 @@
status = buf[OFFSET_7];
- atm_dbg(usbatm, "%s: line state %02x\n", __func__, status);
-
if ((status != instance->last_status) || !status) {
+ atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status);
+
switch (status) {
case 0:
atm_dev->signal = ATM_PHY_SIG_LOST;
@@ -484,7 +507,7 @@
default:
atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
- atm_info(usbatm, "Unknown line state %02x\n", status);
+ atm_info(usbatm, "unknown line state %02x\n", status);
break;
}
@@ -583,11 +606,6 @@
atm_dbg(usbatm, "%s entered\n", __func__);
- if ((ret = usb_set_interface(usb_dev, 1, altsetting)) < 0) {
- atm_dbg(usbatm, "%s: usb_set_interface returned %d!\n", __func__, ret);
- return ret;
- }
-
/* Set MAC address, it is stored in the serial number */
memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
@@ -678,20 +696,27 @@
static int speedtch_bind(struct usbatm_data *usbatm,
struct usb_interface *intf,
- const struct usb_device_id *id,
- int *need_heavy_init)
+ const struct usb_device_id *id)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
- struct usb_interface *cur_intf;
+ struct usb_interface *cur_intf, *data_intf;
struct speedtch_instance_data *instance;
int ifnum = intf->altsetting->desc.bInterfaceNumber;
int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
int i, ret;
+ int use_isoc;
usb_dbg(usbatm, "%s entered\n", __func__);
+ /* sanity checks */
+
if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
- usb_dbg(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+ usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+ return -ENODEV;
+ }
+
+ if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) {
+ usb_err(usbatm, "%s: data interface not found!\n", __func__);
return -ENODEV;
}
@@ -704,25 +729,71 @@
ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
if (ret < 0) {
- usb_dbg(usbatm, "%s: failed to claim interface %d (%d)\n", __func__, i, ret);
+ usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret);
speedtch_release_interfaces(usb_dev, i);
return ret;
}
}
}
- instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+ instance = kzalloc(sizeof(*instance), GFP_KERNEL);
if (!instance) {
- usb_dbg(usbatm, "%s: no memory for instance data!\n", __func__);
+ usb_err(usbatm, "%s: no memory for instance data!\n", __func__);
ret = -ENOMEM;
goto fail_release;
}
- memset(instance, 0, sizeof(struct speedtch_instance_data));
-
instance->usbatm = usbatm;
+ /* altsetting and enable_isoc may change at any moment, so take a snapshot */
+ instance->altsetting = altsetting;
+ use_isoc = enable_isoc;
+
+ if (instance->altsetting)
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
+ usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->altsetting, ret);
+ instance->altsetting = 0; /* fall back to default */
+ }
+
+ if (!instance->altsetting && use_isoc)
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
+ usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
+ use_isoc = 0; /* fall back to bulk */
+ }
+
+ if (use_isoc) {
+ const struct usb_host_interface *desc = data_intf->cur_altsetting;
+ const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
+ int i;
+
+ use_isoc = 0; /* fall back to bulk if endpoint not found */
+
+ for (i=0; i<desc->desc.bNumEndpoints; i++) {
+ const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
+
+ if ((endpoint_desc->bEndpointAddress == target_address)) {
+ use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC;
+ break;
+ }
+ }
+
+ if (!use_isoc)
+ usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
+ }
+
+ if (!use_isoc && !instance->altsetting)
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
+ usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
+ goto fail_free;
+ }
+
+ if (!instance->altsetting)
+ instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
+
+ usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
+
INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
instance->status_checker.timer.function = speedtch_status_poll;
@@ -749,13 +820,15 @@
0x12, 0xc0, 0x07, 0x00,
instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
- *need_heavy_init = (ret != SIZE_7);
+ usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
- usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, need_heavy_init ? "not" : "already");
+ usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
- if (*need_heavy_init)
- if ((ret = usb_reset_device(usb_dev)) < 0)
+ if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT))
+ if ((ret = usb_reset_device(usb_dev)) < 0) {
+ usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret);
goto fail_free;
+ }
usbatm->driver_data = instance;
@@ -787,15 +860,15 @@
***********/
static struct usbatm_driver speedtch_usbatm_driver = {
- .owner = THIS_MODULE,
.driver_name = speedtch_driver_name,
.bind = speedtch_bind,
.heavy_init = speedtch_heavy_init,
.unbind = speedtch_unbind,
.atm_start = speedtch_atm_start,
.atm_stop = speedtch_atm_stop,
- .in = ENDPOINT_DATA,
- .out = ENDPOINT_DATA
+ .bulk_in = ENDPOINT_BULK_DATA,
+ .bulk_out = ENDPOINT_BULK_DATA,
+ .isoc_in = ENDPOINT_ISOC_DATA
};
static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 7d2a679..830d2c9 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -63,11 +63,12 @@
#include <linux/ctype.h>
#include <linux/kthread.h>
#include <linux/version.h>
+#include <linux/mutex.h>
#include <asm/unaligned.h>
#include "usbatm.h"
-#define EAGLEUSBVERSION "ueagle 1.1"
+#define EAGLEUSBVERSION "ueagle 1.2"
/*
@@ -358,16 +359,19 @@
#define INTR_PKT_SIZE 28
static struct usb_driver uea_driver;
-static DECLARE_MUTEX(uea_semaphore);
+static DEFINE_MUTEX(uea_mutex);
static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"};
static int modem_index;
static unsigned int debug;
+static int use_iso[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = 1};
static int sync_wait[NB_MODEM];
static char *cmv_file[NB_MODEM];
module_param(debug, uint, 0644);
MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
+module_param_array(use_iso, bool, NULL, 0644);
+MODULE_PARM_DESC(use_iso, "use isochronous usb pipe for incoming traffic");
module_param_array(sync_wait, bool, NULL, 0644);
MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
module_param_array(cmv_file, charp, NULL, 0644);
@@ -628,8 +632,7 @@
dsp_name = FW_DIR "DSPep.bin";
}
- ret = request_firmware(&sc->dsp_firm,
- dsp_name, &sc->usb_dev->dev);
+ ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev);
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
"requesting firmware %s failed with error %d\n",
@@ -744,7 +747,6 @@
return ret;
return (ret == 0) ? -ETIMEDOUT : 0;
-
}
#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
@@ -935,6 +937,7 @@
* ADI930 don't support it (-EPIPE error).
*/
if (UEA_CHIP_VERSION(sc) != ADI930
+ && !use_iso[sc->modem_index]
&& sc->stats.phy.dsrate != (data >> 16) * 32) {
/* Original timming from ADI(used in windows driver)
* 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits
@@ -1010,7 +1013,7 @@
int ret, size;
u8 *data;
char *file;
- static char cmv_name[256] = FW_DIR;
+ char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
if (cmv_file[sc->modem_index] == NULL) {
if (UEA_CHIP_VERSION(sc) == ADI930)
@@ -1184,8 +1187,7 @@
}
}
- /* finish to send the fpga
- */
+ /* finish to send the fpga */
ret = uea_request(sc, 0xe, 1, 0, NULL);
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
@@ -1193,9 +1195,7 @@
goto err1;
}
- /*
- * Tell the modem we finish : de-assert reset
- */
+ /* Tell the modem we finish : de-assert reset */
value = 0;
ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
if (ret < 0)
@@ -1209,6 +1209,7 @@
return ret;
}
+/* The modem send us an ack. First with check if it right */
static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
{
uea_enters(INS_TO_USBDEV(sc));
@@ -1268,23 +1269,19 @@
*/
static void uea_intr(struct urb *urb, struct pt_regs *regs)
{
- struct uea_softc *sc = (struct uea_softc *)urb->context;
- struct intr_pkt *intr;
+ struct uea_softc *sc = urb->context;
+ struct intr_pkt *intr = urb->transfer_buffer;
uea_enters(INS_TO_USBDEV(sc));
- if (urb->status < 0) {
+ if (unlikely(urb->status < 0)) {
uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
urb->status);
return;
}
- intr = (struct intr_pkt *) urb->transfer_buffer;
-
/* device-to-host interrupt */
if (intr->bType != 0x08 || sc->booting) {
- uea_err(INS_TO_USBDEV(sc), "wrong intr\n");
- // rebooting ?
- // sc->reset = 1;
+ uea_err(INS_TO_USBDEV(sc), "wrong interrupt\n");
goto resubmit;
}
@@ -1300,7 +1297,7 @@
break;
default:
- uea_err(INS_TO_USBDEV(sc), "unknown intr %u\n",
+ uea_err(INS_TO_USBDEV(sc), "unknown interrupt %u\n",
le16_to_cpu(intr->wInterrupt));
}
@@ -1379,7 +1376,7 @@
int ret;
uea_enters(INS_TO_USBDEV(sc));
ret = kthread_stop(sc->kthread);
- uea_info(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
+ uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
/* stop any pending boot process */
flush_scheduled_work();
@@ -1418,13 +1415,13 @@
int ret = -ENODEV;
struct uea_softc *sc;
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
out:
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
return ret;
}
@@ -1434,14 +1431,14 @@
int ret = -ENODEV;
struct uea_softc *sc;
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
sc->reset = 1;
ret = count;
out:
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
return ret;
}
@@ -1453,7 +1450,7 @@
int ret = -ENODEV;
struct uea_softc *sc;
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
@@ -1473,7 +1470,7 @@
break;
}
out:
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
return ret;
}
@@ -1485,7 +1482,7 @@
int ret = -ENODEV;
struct uea_softc *sc;
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
sc = dev_to_uea(dev);
if (!sc)
goto out;
@@ -1497,7 +1494,7 @@
else
ret = sprintf(buf, "GOOD\n");
out:
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
return ret;
}
@@ -1511,7 +1508,7 @@
int ret = -ENODEV; \
struct uea_softc *sc; \
\
- down(&uea_semaphore); \
+ mutex_lock(&uea_mutex); \
sc = dev_to_uea(dev); \
if (!sc) \
goto out; \
@@ -1519,7 +1516,7 @@
if (reset) \
sc->stats.phy.name = 0; \
out: \
- up(&uea_semaphore); \
+ mutex_unlock(&uea_mutex); \
return ret; \
} \
\
@@ -1617,7 +1614,7 @@
}
static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
- const struct usb_device_id *id, int *heavy)
+ const struct usb_device_id *id)
{
struct usb_device *usb = interface_to_usbdev(intf);
struct uea_softc *sc;
@@ -1629,16 +1626,14 @@
if (ifnum != UEA_INTR_IFACE_NO)
return -ENODEV;
- *heavy = sync_wait[modem_index];
+ usbatm->flags = (sync_wait[modem_index] ? 0 : UDSL_SKIP_HEAVY_INIT);
/* interface 1 is for outbound traffic */
ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
if (ret < 0)
return ret;
- /* ADI930 has only 2 interfaces and inbound traffic
- * is on interface 1
- */
+ /* ADI930 has only 2 interfaces and inbound traffic is on interface 1 */
if (UEA_CHIP_VERSION(id) != ADI930) {
/* interface 2 is for inbound traffic */
ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
@@ -1658,6 +1653,25 @@
sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
sc->driver_info = id->driver_info;
+ /* ADI930 don't support iso */
+ if (UEA_CHIP_VERSION(id) != ADI930 && use_iso[sc->modem_index]) {
+ int i;
+
+ /* try set fastest alternate for inbound traffic interface */
+ for (i = FASTEST_ISO_INTF; i > 0; i--)
+ if (usb_set_interface(usb, UEA_DS_IFACE_NO, i) == 0)
+ break;
+
+ if (i > 0) {
+ uea_dbg(usb, "set alternate %d for 2 interface\n", i);
+ uea_info(usb, "using iso mode\n");
+ usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
+ } else {
+ uea_err(usb, "setting any alternate failed for "
+ "2 interface, using bulk mode\n");
+ }
+ }
+
ret = uea_boot(sc);
if (ret < 0) {
kfree(sc);
@@ -1701,13 +1715,13 @@
static struct usbatm_driver uea_usbatm_driver = {
.driver_name = "ueagle-atm",
- .owner = THIS_MODULE,
.bind = uea_bind,
.atm_start = uea_atm_open,
.unbind = uea_unbind,
.heavy_init = uea_heavy,
- .in = UEA_BULK_DATA_PIPE,
- .out = UEA_BULK_DATA_PIPE,
+ .bulk_in = UEA_BULK_DATA_PIPE,
+ .bulk_out = UEA_BULK_DATA_PIPE,
+ .isoc_in = UEA_ISO_DATA_PIPE,
};
static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -1738,9 +1752,9 @@
* Pre-firmware device has one interface
*/
if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
- down(&uea_semaphore);
+ mutex_lock(&uea_mutex);
usbatm_usb_disconnect(intf);
- up(&uea_semaphore);
+ mutex_unlock(&uea_mutex);
uea_info(usb, "ADSL device removed\n");
}
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 7af1883..c1211fc 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -72,6 +72,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
#include <linux/signal.h>
@@ -91,19 +92,18 @@
#endif
#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
-#define DRIVER_VERSION "1.9"
+#define DRIVER_VERSION "1.10"
#define DRIVER_DESC "Generic USB ATM/DSL I/O, version " DRIVER_VERSION
static const char usbatm_driver_name[] = "usbatm";
#define UDSL_MAX_RCV_URBS 16
#define UDSL_MAX_SND_URBS 16
-#define UDSL_MAX_RCV_BUF_SIZE 1024 /* ATM cells */
-#define UDSL_MAX_SND_BUF_SIZE 1024 /* ATM cells */
+#define UDSL_MAX_BUF_SIZE 64 * 1024 /* bytes */
#define UDSL_DEFAULT_RCV_URBS 4
#define UDSL_DEFAULT_SND_URBS 4
-#define UDSL_DEFAULT_RCV_BUF_SIZE 64 /* ATM cells */
-#define UDSL_DEFAULT_SND_BUF_SIZE 64 /* ATM cells */
+#define UDSL_DEFAULT_RCV_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
+#define UDSL_DEFAULT_SND_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
#define ATM_CELL_HEADER (ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
@@ -111,8 +111,8 @@
static unsigned int num_rcv_urbs = UDSL_DEFAULT_RCV_URBS;
static unsigned int num_snd_urbs = UDSL_DEFAULT_SND_URBS;
-static unsigned int rcv_buf_size = UDSL_DEFAULT_RCV_BUF_SIZE;
-static unsigned int snd_buf_size = UDSL_DEFAULT_SND_BUF_SIZE;
+static unsigned int rcv_buf_bytes = UDSL_DEFAULT_RCV_BUF_SIZE;
+static unsigned int snd_buf_bytes = UDSL_DEFAULT_SND_BUF_SIZE;
module_param(num_rcv_urbs, uint, S_IRUGO);
MODULE_PARM_DESC(num_rcv_urbs,
@@ -126,15 +126,15 @@
__MODULE_STRING(UDSL_MAX_SND_URBS) ", default: "
__MODULE_STRING(UDSL_DEFAULT_SND_URBS) ")");
-module_param(rcv_buf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(rcv_buf_size,
- "Size of the buffers used for reception in ATM cells (range: 1-"
- __MODULE_STRING(UDSL_MAX_RCV_BUF_SIZE) ", default: "
+module_param(rcv_buf_bytes, uint, S_IRUGO);
+MODULE_PARM_DESC(rcv_buf_bytes,
+ "Size of the buffers used for reception, in bytes (range: 1-"
+ __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
__MODULE_STRING(UDSL_DEFAULT_RCV_BUF_SIZE) ")");
-module_param(snd_buf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(snd_buf_size,
- "Size of the buffers used for transmission in ATM cells (range: 1-"
+module_param(snd_buf_bytes, uint, S_IRUGO);
+MODULE_PARM_DESC(snd_buf_bytes,
+ "Size of the buffers used for transmission, in bytes (range: 1-"
__MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
__MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
@@ -166,10 +166,10 @@
/* ATM */
-static void usbatm_atm_dev_close(struct atm_dev *dev);
+static void usbatm_atm_dev_close(struct atm_dev *atm_dev);
static int usbatm_atm_open(struct atm_vcc *vcc);
static void usbatm_atm_close(struct atm_vcc *vcc);
-static int usbatm_atm_ioctl(struct atm_dev *dev, unsigned int cmd, void __user * arg);
+static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd, void __user * arg);
static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb);
static int usbatm_atm_proc_read(struct atm_dev *atm_dev, loff_t * pos, char *page);
@@ -199,7 +199,7 @@
if (vcc->pop)
vcc->pop(vcc, skb);
else
- dev_kfree_skb(skb);
+ dev_kfree_skb_any(skb);
}
@@ -234,8 +234,9 @@
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret) {
- atm_dbg(channel->usbatm, "%s: urb 0x%p submission failed (%d)!\n",
- __func__, urb, ret);
+ if (printk_ratelimit())
+ atm_warn(channel->usbatm, "%s: urb 0x%p submission failed (%d)!\n",
+ __func__, urb, ret);
/* consider all errors transient and return the buffer back to the queue */
urb->status = -EAGAIN;
@@ -269,10 +270,16 @@
spin_unlock_irqrestore(&channel->lock, flags);
- if (unlikely(urb->status))
+ if (unlikely(urb->status) &&
+ (!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
+ urb->status != -EILSEQ ))
+ {
+ if (printk_ratelimit())
+ atm_warn(channel->usbatm, "%s: urb 0x%p failed (%d)!\n",
+ __func__, urb, urb->status);
/* throttle processing in case of an error */
mod_timer(&channel->delay, jiffies + msecs_to_jiffies(THROTTLE_MSECS));
- else
+ } else
tasklet_schedule(&channel->tasklet);
}
@@ -284,128 +291,166 @@
static inline struct usbatm_vcc_data *usbatm_find_vcc(struct usbatm_data *instance,
short vpi, int vci)
{
- struct usbatm_vcc_data *vcc;
+ struct usbatm_vcc_data *vcc_data;
- list_for_each_entry(vcc, &instance->vcc_list, list)
- if ((vcc->vci == vci) && (vcc->vpi == vpi))
- return vcc;
+ list_for_each_entry(vcc_data, &instance->vcc_list, list)
+ if ((vcc_data->vci == vci) && (vcc_data->vpi == vpi))
+ return vcc_data;
return NULL;
}
-static void usbatm_extract_cells(struct usbatm_data *instance,
- unsigned char *source, unsigned int avail_data)
+static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char *source)
{
- struct usbatm_vcc_data *cached_vcc = NULL;
struct atm_vcc *vcc;
struct sk_buff *sarb;
- unsigned int stride = instance->rx_channel.stride;
- int vci, cached_vci = 0;
- short vpi, cached_vpi = 0;
- u8 pti;
+ short vpi = ((source[0] & 0x0f) << 4) | (source[1] >> 4);
+ int vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4);
+ u8 pti = ((source[3] & 0xe) >> 1);
- for (; avail_data >= stride; avail_data -= stride, source += stride) {
- vpi = ((source[0] & 0x0f) << 4) | (source[1] >> 4);
- vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4);
- pti = ((source[3] & 0xe) >> 1);
+ vdbg("%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti);
- vdbg("%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti);
+ if ((vci != instance->cached_vci) || (vpi != instance->cached_vpi)) {
+ instance->cached_vpi = vpi;
+ instance->cached_vci = vci;
- if ((vci != cached_vci) || (vpi != cached_vpi)) {
- cached_vpi = vpi;
- cached_vci = vci;
+ instance->cached_vcc = usbatm_find_vcc(instance, vpi, vci);
- cached_vcc = usbatm_find_vcc(instance, vpi, vci);
+ if (!instance->cached_vcc)
+ atm_rldbg(instance, "%s: unknown vpi/vci (%hd/%d)!\n", __func__, vpi, vci);
+ }
- if (!cached_vcc)
- atm_dbg(instance, "%s: unknown vpi/vci (%hd/%d)!\n", __func__, vpi, vci);
- }
+ if (!instance->cached_vcc)
+ return;
- if (!cached_vcc)
- continue;
+ vcc = instance->cached_vcc->vcc;
- vcc = cached_vcc->vcc;
+ /* OAM F5 end-to-end */
+ if (pti == ATM_PTI_E2EF5) {
+ if (printk_ratelimit())
+ atm_warn(instance, "%s: OAM not supported (vpi %d, vci %d)!\n",
+ __func__, vpi, vci);
+ atomic_inc(&vcc->stats->rx_err);
+ return;
+ }
- /* OAM F5 end-to-end */
- if (pti == ATM_PTI_E2EF5) {
- atm_warn(instance, "%s: OAM not supported (vpi %d, vci %d)!\n", __func__, vpi, vci);
+ sarb = instance->cached_vcc->sarb;
+
+ if (sarb->tail + ATM_CELL_PAYLOAD > sarb->end) {
+ atm_rldbg(instance, "%s: buffer overrun (sarb->len %u, vcc: 0x%p)!\n",
+ __func__, sarb->len, vcc);
+ /* discard cells already received */
+ skb_trim(sarb, 0);
+ UDSL_ASSERT(sarb->tail + ATM_CELL_PAYLOAD <= sarb->end);
+ }
+
+ memcpy(sarb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
+ __skb_put(sarb, ATM_CELL_PAYLOAD);
+
+ if (pti & 1) {
+ struct sk_buff *skb;
+ unsigned int length;
+ unsigned int pdu_length;
+
+ length = (source[ATM_CELL_SIZE - 6] << 8) + source[ATM_CELL_SIZE - 5];
+
+ /* guard against overflow */
+ if (length > ATM_MAX_AAL5_PDU) {
+ atm_rldbg(instance, "%s: bogus length %u (vcc: 0x%p)!\n",
+ __func__, length, vcc);
atomic_inc(&vcc->stats->rx_err);
- continue;
+ goto out;
}
- sarb = cached_vcc->sarb;
+ pdu_length = usbatm_pdu_length(length);
- if (sarb->tail + ATM_CELL_PAYLOAD > sarb->end) {
- atm_dbg(instance, "%s: buffer overrun (sarb->len %u, vcc: 0x%p)!\n",
- __func__, sarb->len, vcc);
- /* discard cells already received */
- skb_trim(sarb, 0);
- UDSL_ASSERT(sarb->tail + ATM_CELL_PAYLOAD <= sarb->end);
+ if (sarb->len < pdu_length) {
+ atm_rldbg(instance, "%s: bogus pdu_length %u (sarb->len: %u, vcc: 0x%p)!\n",
+ __func__, pdu_length, sarb->len, vcc);
+ atomic_inc(&vcc->stats->rx_err);
+ goto out;
}
- memcpy(sarb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
- __skb_put(sarb, ATM_CELL_PAYLOAD);
-
- if (pti & 1) {
- struct sk_buff *skb;
- unsigned int length;
- unsigned int pdu_length;
-
- length = (source[ATM_CELL_SIZE - 6] << 8) + source[ATM_CELL_SIZE - 5];
-
- /* guard against overflow */
- if (length > ATM_MAX_AAL5_PDU) {
- atm_dbg(instance, "%s: bogus length %u (vcc: 0x%p)!\n",
- __func__, length, vcc);
- atomic_inc(&vcc->stats->rx_err);
- goto out;
- }
-
- pdu_length = usbatm_pdu_length(length);
-
- if (sarb->len < pdu_length) {
- atm_dbg(instance, "%s: bogus pdu_length %u (sarb->len: %u, vcc: 0x%p)!\n",
- __func__, pdu_length, sarb->len, vcc);
- atomic_inc(&vcc->stats->rx_err);
- goto out;
- }
-
- if (crc32_be(~0, sarb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
- atm_dbg(instance, "%s: packet failed crc check (vcc: 0x%p)!\n",
- __func__, vcc);
- atomic_inc(&vcc->stats->rx_err);
- goto out;
- }
-
- vdbg("%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc);
-
- if (!(skb = dev_alloc_skb(length))) {
- atm_dbg(instance, "%s: no memory for skb (length: %u)!\n", __func__, length);
- atomic_inc(&vcc->stats->rx_drop);
- goto out;
- }
-
- vdbg("%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", __func__, skb, skb->truesize);
-
- if (!atm_charge(vcc, skb->truesize)) {
- atm_dbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n", __func__, skb->truesize);
- dev_kfree_skb(skb);
- goto out; /* atm_charge increments rx_drop */
- }
-
- memcpy(skb->data, sarb->tail - pdu_length, length);
- __skb_put(skb, length);
-
- vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u",
- __func__, skb, skb->len, skb->truesize);
-
- PACKETDEBUG(skb->data, skb->len);
-
- vcc->push(vcc, skb);
-
- atomic_inc(&vcc->stats->rx);
- out:
- skb_trim(sarb, 0);
+ if (crc32_be(~0, sarb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
+ atm_rldbg(instance, "%s: packet failed crc check (vcc: 0x%p)!\n",
+ __func__, vcc);
+ atomic_inc(&vcc->stats->rx_err);
+ goto out;
}
+
+ vdbg("%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc);
+
+ if (!(skb = dev_alloc_skb(length))) {
+ if (printk_ratelimit())
+ atm_err(instance, "%s: no memory for skb (length: %u)!\n",
+ __func__, length);
+ atomic_inc(&vcc->stats->rx_drop);
+ goto out;
+ }
+
+ vdbg("%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", __func__, skb, skb->truesize);
+
+ if (!atm_charge(vcc, skb->truesize)) {
+ atm_rldbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n",
+ __func__, skb->truesize);
+ dev_kfree_skb_any(skb);
+ goto out; /* atm_charge increments rx_drop */
+ }
+
+ memcpy(skb->data, sarb->tail - pdu_length, length);
+ __skb_put(skb, length);
+
+ vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u",
+ __func__, skb, skb->len, skb->truesize);
+
+ PACKETDEBUG(skb->data, skb->len);
+
+ vcc->push(vcc, skb);
+
+ atomic_inc(&vcc->stats->rx);
+ out:
+ skb_trim(sarb, 0);
+ }
+}
+
+static void usbatm_extract_cells(struct usbatm_data *instance,
+ unsigned char *source, unsigned int avail_data)
+{
+ unsigned int stride = instance->rx_channel.stride;
+ unsigned int buf_usage = instance->buf_usage;
+
+ /* extract cells from incoming data, taking into account that
+ * the length of avail data may not be a multiple of stride */
+
+ if (buf_usage > 0) {
+ /* we have a partially received atm cell */
+ unsigned char *cell_buf = instance->cell_buf;
+ unsigned int space_left = stride - buf_usage;
+
+ UDSL_ASSERT(buf_usage <= stride);
+
+ if (avail_data >= space_left) {
+ /* add new data and process cell */
+ memcpy(cell_buf + buf_usage, source, space_left);
+ source += space_left;
+ avail_data -= space_left;
+ usbatm_extract_one_cell(instance, cell_buf);
+ instance->buf_usage = 0;
+ } else {
+ /* not enough data to fill the cell */
+ memcpy(cell_buf + buf_usage, source, avail_data);
+ instance->buf_usage = buf_usage + avail_data;
+ return;
+ }
+ }
+
+ for (; avail_data >= stride; avail_data -= stride, source += stride)
+ usbatm_extract_one_cell(instance, source);
+
+ if (avail_data > 0) {
+ /* length was not a multiple of stride -
+ * save remaining data for next call */
+ memcpy(instance->cell_buf, source, avail_data);
+ instance->buf_usage = avail_data;
}
}
@@ -420,14 +465,14 @@
{
struct usbatm_control *ctrl = UDSL_SKB(skb);
struct atm_vcc *vcc = ctrl->atm.vcc;
- unsigned int num_written;
+ unsigned int bytes_written;
unsigned int stride = instance->tx_channel.stride;
vdbg("%s: skb->len=%d, avail_space=%u", __func__, skb->len, avail_space);
UDSL_ASSERT(!(avail_space % stride));
- for (num_written = 0; num_written < avail_space && ctrl->len;
- num_written += stride, target += stride) {
+ for (bytes_written = 0; bytes_written < avail_space && ctrl->len;
+ bytes_written += stride, target += stride) {
unsigned int data_len = min_t(unsigned int, skb->len, ATM_CELL_PAYLOAD);
unsigned int left = ATM_CELL_PAYLOAD - data_len;
u8 *ptr = target;
@@ -470,7 +515,7 @@
ctrl->crc = crc32_be(ctrl->crc, ptr, left);
}
- return num_written;
+ return bytes_written;
}
@@ -487,16 +532,40 @@
vdbg("%s: processing urb 0x%p", __func__, urb);
if (usb_pipeisoc(urb->pipe)) {
+ unsigned char *merge_start = NULL;
+ unsigned int merge_length = 0;
+ const unsigned int packet_size = instance->rx_channel.packet_size;
int i;
- for (i = 0; i < urb->number_of_packets; i++)
- if (!urb->iso_frame_desc[i].status)
- usbatm_extract_cells(instance,
- (u8 *)urb->transfer_buffer + urb->iso_frame_desc[i].offset,
- urb->iso_frame_desc[i].actual_length);
- }
- else
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ if (!urb->iso_frame_desc[i].status) {
+ unsigned int actual_length = urb->iso_frame_desc[i].actual_length;
+
+ UDSL_ASSERT(actual_length <= packet_size);
+
+ if (!merge_length)
+ merge_start = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ merge_length += actual_length;
+ if (merge_length && (actual_length < packet_size)) {
+ usbatm_extract_cells(instance, merge_start, merge_length);
+ merge_length = 0;
+ }
+ } else {
+ atm_rldbg(instance, "%s: status %d in frame %d!\n", __func__, urb->status, i);
+ if (merge_length)
+ usbatm_extract_cells(instance, merge_start, merge_length);
+ merge_length = 0;
+ instance->buf_usage = 0;
+ }
+ }
+
+ if (merge_length)
+ usbatm_extract_cells(instance, merge_start, merge_length);
+ } else
if (!urb->status)
usbatm_extract_cells(instance, urb->transfer_buffer, urb->actual_length);
+ else
+ instance->buf_usage = 0;
if (usbatm_submit_urb(urb))
return;
@@ -514,7 +583,7 @@
struct sk_buff *skb = instance->current_skb;
struct urb *urb = NULL;
const unsigned int buf_size = instance->tx_channel.buf_size;
- unsigned int num_written = 0;
+ unsigned int bytes_written = 0;
u8 *buffer = NULL;
if (!skb)
@@ -526,16 +595,16 @@
if (!urb)
break; /* no more senders */
buffer = urb->transfer_buffer;
- num_written = (urb->status == -EAGAIN) ?
+ bytes_written = (urb->status == -EAGAIN) ?
urb->transfer_buffer_length : 0;
}
- num_written += usbatm_write_cells(instance, skb,
- buffer + num_written,
- buf_size - num_written);
+ bytes_written += usbatm_write_cells(instance, skb,
+ buffer + bytes_written,
+ buf_size - bytes_written);
vdbg("%s: wrote %u bytes from skb 0x%p to urb 0x%p",
- __func__, num_written, skb, urb);
+ __func__, bytes_written, skb, urb);
if (!UDSL_SKB(skb)->len) {
struct atm_vcc *vcc = UDSL_SKB(skb)->atm.vcc;
@@ -546,8 +615,8 @@
skb = skb_dequeue(&instance->sndqueue);
}
- if (num_written == buf_size || (!skb && num_written)) {
- urb->transfer_buffer_length = num_written;
+ if (bytes_written == buf_size || (!skb && bytes_written)) {
+ urb->transfer_buffer_length = bytes_written;
if (usbatm_submit_urb(urb))
break;
@@ -593,20 +662,24 @@
vdbg("%s called (skb 0x%p, len %u)", __func__, skb, skb->len);
- if (!instance) {
- dbg("%s: NULL data!", __func__);
+ /* racy disconnection check - fine */
+ if (!instance || instance->disconnected) {
+#ifdef DEBUG
+ if (printk_ratelimit())
+ printk(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
+#endif
err = -ENODEV;
goto fail;
}
if (vcc->qos.aal != ATM_AAL5) {
- atm_dbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
+ atm_rldbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
err = -EINVAL;
goto fail;
}
if (skb->len > ATM_MAX_AAL5_PDU) {
- atm_dbg(instance, "%s: packet too long (%d vs %d)!\n",
+ atm_rldbg(instance, "%s: packet too long (%d vs %d)!\n",
__func__, skb->len, ATM_MAX_AAL5_PDU);
err = -EINVAL;
goto fail;
@@ -665,16 +738,16 @@
** ATM **
**********/
-static void usbatm_atm_dev_close(struct atm_dev *dev)
+static void usbatm_atm_dev_close(struct atm_dev *atm_dev)
{
- struct usbatm_data *instance = dev->dev_data;
+ struct usbatm_data *instance = atm_dev->dev_data;
dbg("%s", __func__);
if (!instance)
return;
- dev->dev_data = NULL;
+ atm_dev->dev_data = NULL; /* catch bugs */
usbatm_put_instance(instance); /* taken in usbatm_atm_init */
}
@@ -706,15 +779,19 @@
atomic_read(&atm_dev->stats.aal5.rx_err),
atomic_read(&atm_dev->stats.aal5.rx_drop));
- if (!left--)
- switch (atm_dev->signal) {
- case ATM_PHY_SIG_FOUND:
- return sprintf(page, "Line up\n");
- case ATM_PHY_SIG_LOST:
- return sprintf(page, "Line down\n");
- default:
- return sprintf(page, "Line state unknown\n");
- }
+ if (!left--) {
+ if (instance->disconnected)
+ return sprintf(page, "Disconnected\n");
+ else
+ switch (atm_dev->signal) {
+ case ATM_PHY_SIG_FOUND:
+ return sprintf(page, "Line up\n");
+ case ATM_PHY_SIG_LOST:
+ return sprintf(page, "Line down\n");
+ default:
+ return sprintf(page, "Line state unknown\n");
+ }
+ }
return 0;
}
@@ -735,13 +812,24 @@
atm_dbg(instance, "%s: vpi %hd, vci %d\n", __func__, vpi, vci);
/* only support AAL5 */
- if ((vcc->qos.aal != ATM_AAL5) || (vcc->qos.rxtp.max_sdu < 0)
- || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
- atm_dbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
+ if ((vcc->qos.aal != ATM_AAL5)) {
+ atm_warn(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
return -EINVAL;
}
- down(&instance->serialize); /* vs self, usbatm_atm_close */
+ /* sanity checks */
+ if ((vcc->qos.rxtp.max_sdu < 0) || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
+ atm_dbg(instance, "%s: max_sdu %d out of range!\n", __func__, vcc->qos.rxtp.max_sdu);
+ return -EINVAL;
+ }
+
+ mutex_lock(&instance->serialize); /* vs self, usbatm_atm_close, usbatm_usb_disconnect */
+
+ if (instance->disconnected) {
+ atm_dbg(instance, "%s: disconnected!\n", __func__);
+ ret = -ENODEV;
+ goto fail;
+ }
if (usbatm_find_vcc(instance, vpi, vci)) {
atm_dbg(instance, "%s: %hd/%d already in use!\n", __func__, vpi, vci);
@@ -749,20 +837,19 @@
goto fail;
}
- if (!(new = kmalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL))) {
- atm_dbg(instance, "%s: no memory for vcc_data!\n", __func__);
+ if (!(new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL))) {
+ atm_err(instance, "%s: no memory for vcc_data!\n", __func__);
ret = -ENOMEM;
goto fail;
}
- memset(new, 0, sizeof(struct usbatm_vcc_data));
new->vcc = vcc;
new->vpi = vpi;
new->vci = vci;
new->sarb = alloc_skb(usbatm_pdu_length(vcc->qos.rxtp.max_sdu), GFP_KERNEL);
if (!new->sarb) {
- atm_dbg(instance, "%s: no memory for SAR buffer!\n", __func__);
+ atm_err(instance, "%s: no memory for SAR buffer!\n", __func__);
ret = -ENOMEM;
goto fail;
}
@@ -770,6 +857,9 @@
vcc->dev_data = new;
tasklet_disable(&instance->rx_channel.tasklet);
+ instance->cached_vcc = new;
+ instance->cached_vpi = vpi;
+ instance->cached_vci = vci;
list_add(&new->list, &instance->vcc_list);
tasklet_enable(&instance->rx_channel.tasklet);
@@ -777,7 +867,7 @@
set_bit(ATM_VF_PARTIAL, &vcc->flags);
set_bit(ATM_VF_READY, &vcc->flags);
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
atm_dbg(instance, "%s: allocated vcc data 0x%p\n", __func__, new);
@@ -785,7 +875,7 @@
fail:
kfree(new);
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
return ret;
}
@@ -806,9 +896,14 @@
usbatm_cancel_send(instance, vcc);
- down(&instance->serialize); /* vs self, usbatm_atm_open */
+ mutex_lock(&instance->serialize); /* vs self, usbatm_atm_open, usbatm_usb_disconnect */
tasklet_disable(&instance->rx_channel.tasklet);
+ if (instance->cached_vcc == vcc_data) {
+ instance->cached_vcc = NULL;
+ instance->cached_vpi = ATM_VPI_UNSPEC;
+ instance->cached_vci = ATM_VCI_UNSPEC;
+ }
list_del(&vcc_data->list);
tasklet_enable(&instance->rx_channel.tasklet);
@@ -824,14 +919,21 @@
clear_bit(ATM_VF_PARTIAL, &vcc->flags);
clear_bit(ATM_VF_ADDR, &vcc->flags);
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
atm_dbg(instance, "%s successful\n", __func__);
}
-static int usbatm_atm_ioctl(struct atm_dev *dev, unsigned int cmd,
+static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd,
void __user * arg)
{
+ struct usbatm_data *instance = atm_dev->dev_data;
+
+ if (!instance || instance->disconnected) {
+ dbg("%s: %s!", __func__, instance ? "disconnected" : "NULL instance");
+ return -ENODEV;
+ }
+
switch (cmd) {
case ATM_QUERYLOOP:
return put_user(ATM_LM_NONE, (int __user *)arg) ? -EFAULT : 0;
@@ -845,10 +947,13 @@
struct atm_dev *atm_dev;
int ret, i;
- /* ATM init */
+ /* ATM init. The ATM initialization scheme suffers from an intrinsic race
+ * condition: callbacks we register can be executed at once, before we have
+ * initialized the struct atm_dev. To protect against this, all callbacks
+ * abort if atm_dev->dev_data is NULL. */
atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL);
if (!atm_dev) {
- usb_dbg(instance, "%s: failed to register ATM device!\n", __func__);
+ usb_err(instance, "%s: failed to register ATM device!\n", __func__);
return -1;
}
@@ -862,12 +967,13 @@
atm_dev->link_rate = 128 * 1000 / 424;
if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
- atm_dbg(instance, "%s: atm_start failed: %d!\n", __func__, ret);
+ atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
goto fail;
}
- /* ready for ATM callbacks */
usbatm_get_instance(instance); /* dropped in usbatm_atm_dev_close */
+
+ /* ready for ATM callbacks */
mb();
atm_dev->dev_data = instance;
@@ -903,9 +1009,9 @@
if (!ret)
ret = usbatm_atm_init(instance);
- down(&instance->serialize);
+ mutex_lock(&instance->serialize);
instance->thread_pid = -1;
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
complete_and_exit(&instance->thread_exited, ret);
}
@@ -915,13 +1021,13 @@
int ret = kernel_thread(usbatm_do_heavy_init, instance, CLONE_KERNEL);
if (ret < 0) {
- usb_dbg(instance, "%s: failed to create kernel_thread (%d)!\n", __func__, ret);
+ usb_err(instance, "%s: failed to create kernel_thread (%d)!\n", __func__, ret);
return ret;
}
- down(&instance->serialize);
+ mutex_lock(&instance->serialize);
instance->thread_pid = ret;
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
wait_for_completion(&instance->thread_started);
@@ -951,9 +1057,9 @@
char *buf;
int error = -ENOMEM;
int i, length;
- int need_heavy;
+ unsigned int maxpacket, num_packets;
- dev_dbg(dev, "%s: trying driver %s with vendor=0x%x, product=0x%x, ifnum %d\n",
+ dev_dbg(dev, "%s: trying driver %s with vendor=%04x, product=%04x, ifnum %2d\n",
__func__, driver->driver_name,
le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct),
@@ -962,7 +1068,7 @@
/* instance init */
instance = kzalloc(sizeof(*instance) + sizeof(struct urb *) * (num_rcv_urbs + num_snd_urbs), GFP_KERNEL);
if (!instance) {
- dev_dbg(dev, "%s: no memory for instance data!\n", __func__);
+ dev_err(dev, "%s: no memory for instance data!\n", __func__);
return -ENOMEM;
}
@@ -996,66 +1102,96 @@
snprintf(buf, length, ")");
bind:
- need_heavy = 1;
- if (driver->bind && (error = driver->bind(instance, intf, id, &need_heavy)) < 0) {
- dev_dbg(dev, "%s: bind failed: %d!\n", __func__, error);
+ if (driver->bind && (error = driver->bind(instance, intf, id)) < 0) {
+ dev_err(dev, "%s: bind failed: %d!\n", __func__, error);
goto fail_free;
}
/* private fields */
kref_init(&instance->refcount); /* dropped in usbatm_usb_disconnect */
- init_MUTEX(&instance->serialize);
+ mutex_init(&instance->serialize);
instance->thread_pid = -1;
init_completion(&instance->thread_started);
init_completion(&instance->thread_exited);
INIT_LIST_HEAD(&instance->vcc_list);
+ skb_queue_head_init(&instance->sndqueue);
usbatm_init_channel(&instance->rx_channel);
usbatm_init_channel(&instance->tx_channel);
tasklet_init(&instance->rx_channel.tasklet, usbatm_rx_process, (unsigned long)instance);
tasklet_init(&instance->tx_channel.tasklet, usbatm_tx_process, (unsigned long)instance);
- instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->in);
- instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->out);
instance->rx_channel.stride = ATM_CELL_SIZE + driver->rx_padding;
instance->tx_channel.stride = ATM_CELL_SIZE + driver->tx_padding;
- instance->rx_channel.buf_size = rcv_buf_size * instance->rx_channel.stride;
- instance->tx_channel.buf_size = snd_buf_size * instance->tx_channel.stride;
instance->rx_channel.usbatm = instance->tx_channel.usbatm = instance;
- skb_queue_head_init(&instance->sndqueue);
+ if ((instance->flags & UDSL_USE_ISOC) && driver->isoc_in)
+ instance->rx_channel.endpoint = usb_rcvisocpipe(usb_dev, driver->isoc_in);
+ else
+ instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->bulk_in);
+
+ instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out);
+
+ /* tx buffer size must be a positive multiple of the stride */
+ instance->tx_channel.buf_size = max (instance->tx_channel.stride,
+ snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride));
+
+ /* rx buffer size must be a positive multiple of the endpoint maxpacket */
+ maxpacket = usb_maxpacket(usb_dev, instance->rx_channel.endpoint, 0);
+
+ if ((maxpacket < 1) || (maxpacket > UDSL_MAX_BUF_SIZE)) {
+ dev_err(dev, "%s: invalid endpoint %02x!\n", __func__,
+ usb_pipeendpoint(instance->rx_channel.endpoint));
+ error = -EINVAL;
+ goto fail_unbind;
+ }
+
+ num_packets = max (1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
+
+ if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE)
+ num_packets--;
+
+ instance->rx_channel.buf_size = num_packets * maxpacket;
+ instance->rx_channel.packet_size = maxpacket;
+
+#ifdef DEBUG
+ for (i = 0; i < 2; i++) {
+ struct usbatm_channel *channel = i ?
+ &instance->tx_channel : &instance->rx_channel;
+
+ dev_dbg(dev, "%s: using %d byte buffer for %s channel 0x%p\n", __func__, channel->buf_size, i ? "tx" : "rx", channel);
+ }
+#endif
+
+ /* initialize urbs */
for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
- struct urb *urb;
u8 *buffer;
- unsigned int iso_packets = 0, iso_size = 0;
struct usbatm_channel *channel = i < num_rcv_urbs ?
&instance->rx_channel : &instance->tx_channel;
+ struct urb *urb;
+ unsigned int iso_packets = usb_pipeisoc(channel->endpoint) ? channel->buf_size / channel->packet_size : 0;
- if (usb_pipeisoc(channel->endpoint)) {
- /* don't expect iso out endpoints */
- iso_size = usb_maxpacket(instance->usb_dev, channel->endpoint, 0);
- iso_size -= iso_size % channel->stride; /* alignment */
- BUG_ON(!iso_size);
- iso_packets = (channel->buf_size - 1) / iso_size + 1;
- }
+ UDSL_ASSERT(!usb_pipeisoc(channel->endpoint) || usb_pipein(channel->endpoint));
urb = usb_alloc_urb(iso_packets, GFP_KERNEL);
if (!urb) {
- dev_dbg(dev, "%s: no memory for urb %d!\n", __func__, i);
+ dev_err(dev, "%s: no memory for urb %d!\n", __func__, i);
+ error = -ENOMEM;
goto fail_unbind;
}
instance->urbs[i] = urb;
- buffer = kmalloc(channel->buf_size, GFP_KERNEL);
+ /* zero the tx padding to avoid leaking information */
+ buffer = kzalloc(channel->buf_size, GFP_KERNEL);
if (!buffer) {
- dev_dbg(dev, "%s: no memory for buffer %d!\n", __func__, i);
+ dev_err(dev, "%s: no memory for buffer %d!\n", __func__, i);
+ error = -ENOMEM;
goto fail_unbind;
}
- memset(buffer, 0, channel->buf_size);
usb_fill_bulk_urb(urb, instance->usb_dev, channel->endpoint,
buffer, channel->buf_size, usbatm_complete, channel);
@@ -1065,9 +1201,8 @@
urb->transfer_flags = URB_ISO_ASAP;
urb->number_of_packets = iso_packets;
for (j = 0; j < iso_packets; j++) {
- urb->iso_frame_desc[j].offset = iso_size * j;
- urb->iso_frame_desc[j].length = min_t(int, iso_size,
- channel->buf_size - urb->iso_frame_desc[j].offset);
+ urb->iso_frame_desc[j].offset = channel->packet_size * j;
+ urb->iso_frame_desc[j].length = channel->packet_size;
}
}
@@ -1079,7 +1214,17 @@
__func__, urb->transfer_buffer, urb->transfer_buffer_length, urb);
}
- if (need_heavy && driver->heavy_init) {
+ instance->cached_vpi = ATM_VPI_UNSPEC;
+ instance->cached_vci = ATM_VCI_UNSPEC;
+ instance->cell_buf = kmalloc(instance->rx_channel.stride, GFP_KERNEL);
+
+ if (!instance->cell_buf) {
+ dev_err(dev, "%s: no memory for cell buffer!\n", __func__);
+ error = -ENOMEM;
+ goto fail_unbind;
+ }
+
+ if (!(instance->flags & UDSL_SKIP_HEAVY_INIT) && driver->heavy_init) {
error = usbatm_heavy_init(instance);
} else {
complete(&instance->thread_exited); /* pretend that heavy_init was run */
@@ -1098,6 +1243,8 @@
if (instance->driver->unbind)
instance->driver->unbind(instance, intf);
fail_free:
+ kfree(instance->cell_buf);
+
for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
if (instance->urbs[i])
kfree(instance->urbs[i]->transfer_buffer);
@@ -1114,6 +1261,7 @@
{
struct device *dev = &intf->dev;
struct usbatm_data *instance = usb_get_intfdata(intf);
+ struct usbatm_vcc_data *vcc_data;
int i;
dev_dbg(dev, "%s entered\n", __func__);
@@ -1125,13 +1273,19 @@
usb_set_intfdata(intf, NULL);
- down(&instance->serialize);
+ mutex_lock(&instance->serialize);
+ instance->disconnected = 1;
if (instance->thread_pid >= 0)
kill_proc(instance->thread_pid, SIGTERM, 1);
- up(&instance->serialize);
+ mutex_unlock(&instance->serialize);
wait_for_completion(&instance->thread_exited);
+ mutex_lock(&instance->serialize);
+ list_for_each_entry(vcc_data, &instance->vcc_list, list)
+ vcc_release_async(vcc_data->vcc, -EPIPE);
+ mutex_unlock(&instance->serialize);
+
tasklet_disable(&instance->rx_channel.tasklet);
tasklet_disable(&instance->tx_channel.tasklet);
@@ -1141,6 +1295,14 @@
del_timer_sync(&instance->rx_channel.delay);
del_timer_sync(&instance->tx_channel.delay);
+ /* turn usbatm_[rt]x_process into something close to a no-op */
+ /* no need to take the spinlock */
+ INIT_LIST_HEAD(&instance->rx_channel.list);
+ INIT_LIST_HEAD(&instance->tx_channel.list);
+
+ tasklet_enable(&instance->rx_channel.tasklet);
+ tasklet_enable(&instance->tx_channel.tasklet);
+
if (instance->atm_dev && instance->driver->atm_stop)
instance->driver->atm_stop(instance, instance->atm_dev);
@@ -1149,19 +1311,13 @@
instance->driver_data = NULL;
- /* turn usbatm_[rt]x_process into noop */
- /* no need to take the spinlock */
- INIT_LIST_HEAD(&instance->rx_channel.list);
- INIT_LIST_HEAD(&instance->tx_channel.list);
-
- tasklet_enable(&instance->rx_channel.tasklet);
- tasklet_enable(&instance->tx_channel.tasklet);
-
for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
kfree(instance->urbs[i]->transfer_buffer);
usb_free_urb(instance->urbs[i]);
}
+ kfree(instance->cell_buf);
+
/* ATM finalize */
if (instance->atm_dev)
atm_dev_deregister(instance->atm_dev);
@@ -1186,10 +1342,10 @@
if ((num_rcv_urbs > UDSL_MAX_RCV_URBS)
|| (num_snd_urbs > UDSL_MAX_SND_URBS)
- || (rcv_buf_size < 1)
- || (rcv_buf_size > UDSL_MAX_RCV_BUF_SIZE)
- || (snd_buf_size < 1)
- || (snd_buf_size > UDSL_MAX_SND_BUF_SIZE))
+ || (rcv_buf_bytes < 1)
+ || (rcv_buf_bytes > UDSL_MAX_BUF_SIZE)
+ || (snd_buf_bytes < 1)
+ || (snd_buf_bytes > UDSL_MAX_BUF_SIZE))
return -EINVAL;
return 0;
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
index 1adacd6..ff8551e 100644
--- a/drivers/usb/atm/usbatm.h
+++ b/drivers/usb/atm/usbatm.h
@@ -24,21 +24,21 @@
#ifndef _USBATM_H_
#define _USBATM_H_
-#include <linux/config.h>
-
-/*
-#define VERBOSE_DEBUG
-*/
-
#include <asm/semaphore.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
#include <linux/completion.h>
#include <linux/device.h>
+#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/list.h>
#include <linux/stringify.h>
#include <linux/usb.h>
+#include <linux/mutex.h>
+
+/*
+#define VERBOSE_DEBUG
+*/
#ifdef DEBUG
#define UDSL_ASSERT(x) BUG_ON(!(x))
@@ -52,8 +52,13 @@
dev_info(&(instance)->usb_intf->dev , format , ## arg)
#define usb_warn(instance, format, arg...) \
dev_warn(&(instance)->usb_intf->dev , format , ## arg)
+#ifdef DEBUG
#define usb_dbg(instance, format, arg...) \
- dev_dbg(&(instance)->usb_intf->dev , format , ## arg)
+ dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
+#else
+#define usb_dbg(instance, format, arg...) \
+ do {} while (0)
+#endif
/* FIXME: move to dev_* once ATM is driver model aware */
#define atm_printk(level, instance, format, arg...) \
@@ -69,12 +74,24 @@
#ifdef DEBUG
#define atm_dbg(instance, format, arg...) \
atm_printk(KERN_DEBUG, instance , format , ## arg)
+#define atm_rldbg(instance, format, arg...) \
+ if (printk_ratelimit()) \
+ atm_printk(KERN_DEBUG, instance , format , ## arg)
#else
#define atm_dbg(instance, format, arg...) \
do {} while (0)
+#define atm_rldbg(instance, format, arg...) \
+ do {} while (0)
#endif
+/* flags, set by mini-driver in bind() */
+
+#define UDSL_SKIP_HEAVY_INIT (1<<0)
+#define UDSL_USE_ISOC (1<<1)
+#define UDSL_IGNORE_EILSEQ (1<<2)
+
+
/* mini driver */
struct usbatm_data;
@@ -86,16 +103,11 @@
*/
struct usbatm_driver {
- struct module *owner;
-
const char *driver_name;
- /*
- * init device ... can sleep, or cause probe() failure. Drivers with a heavy_init
- * method can avoid having it called by setting need_heavy_init to zero.
- */
+ /* init device ... can sleep, or cause probe() failure */
int (*bind) (struct usbatm_data *, struct usb_interface *,
- const struct usb_device_id *id, int *need_heavy_init);
+ const struct usb_device_id *id);
/* additional device initialization that is too slow to be done in probe() */
int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
@@ -109,8 +121,9 @@
/* cleanup ATM device ... can sleep, but can't fail */
void (*atm_stop) (struct usbatm_data *, struct atm_dev *);
- int in; /* rx endpoint */
- int out; /* tx endpoint */
+ int bulk_in; /* bulk rx endpoint */
+ int isoc_in; /* isochronous rx endpoint */
+ int bulk_out; /* bulk tx endpoint */
unsigned rx_padding;
unsigned tx_padding;
@@ -125,6 +138,7 @@
int endpoint; /* usb pipe */
unsigned int stride; /* ATM cell size + padding */
unsigned int buf_size; /* urb buffer size */
+ unsigned int packet_size; /* endpoint maxpacket */
spinlock_t lock;
struct list_head list;
struct tasklet_struct tasklet;
@@ -143,6 +157,7 @@
struct usbatm_driver *driver;
void *driver_data;
char driver_name[16];
+ unsigned int flags; /* set by mini-driver in bind() */
/* USB device */
struct usb_device *usb_dev;
@@ -157,7 +172,8 @@
********************************/
struct kref refcount;
- struct semaphore serialize;
+ struct mutex serialize;
+ int disconnected;
/* heavy init */
int thread_pid;
@@ -171,7 +187,14 @@
struct usbatm_channel tx_channel;
struct sk_buff_head sndqueue;
- struct sk_buff *current_skb; /* being emptied */
+ struct sk_buff *current_skb; /* being emptied */
+
+ struct usbatm_vcc_data *cached_vcc;
+ int cached_vci;
+ short cached_vpi;
+
+ unsigned char *cell_buf; /* holds partial rx cell */
+ unsigned int buf_usage;
struct urb *urbs[0];
};
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index 5c76e3a..42d6823 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -41,6 +41,8 @@
XUSBATM_PARM(tx_endpoint, unsigned char, byte, "tx endpoint number");
XUSBATM_PARM(rx_padding, unsigned char, byte, "rx padding (default 0)");
XUSBATM_PARM(tx_padding, unsigned char, byte, "tx padding (default 0)");
+XUSBATM_PARM(rx_altsetting, unsigned char, byte, "rx altsetting (default 0)");
+XUSBATM_PARM(tx_altsetting, unsigned char, byte, "rx altsetting (default 0)");
static const char xusbatm_driver_name[] = "xusbatm";
@@ -48,82 +50,118 @@
static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1];
static struct usb_driver xusbatm_usb_driver;
-static int usb_intf_has_ep(const struct usb_interface *intf, u8 ep)
+static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int altsetting, u8 ep)
{
+ struct usb_host_interface *alt;
+ struct usb_interface *intf;
int i, j;
- for (i = 0; i < intf->num_altsetting; i++) {
- struct usb_host_interface *alt = intf->altsetting;
- for (j = 0; j < alt->desc.bNumEndpoints; j++)
- if ((alt->endpoint[i].desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) == ep)
- return 1;
+ for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
+ if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting)))
+ for (j = 0; j < alt->desc.bNumEndpoints; j++)
+ if (alt->endpoint[j].desc.bEndpointAddress == ep)
+ return intf;
+ return NULL;
+}
+
+static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *usb_dev,
+ struct usb_interface *intf, int altsetting, int claim)
+{
+ int ifnum = intf->altsetting->desc.bInterfaceNumber;
+ int ret;
+
+ if (claim && (ret = usb_driver_claim_interface(&xusbatm_usb_driver, intf, usbatm))) {
+ usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, ifnum, ret);
+ return ret;
+ }
+ if ((ret = usb_set_interface(usb_dev, ifnum, altsetting))) {
+ usb_err(usbatm, "%s: altsetting %2d for interface %2d failed (%d)!\n", __func__, altsetting, ifnum, ret);
+ return ret;
}
return 0;
}
-static int xusbatm_bind(struct usbatm_data *usbatm_instance,
- struct usb_interface *intf, const struct usb_device_id *id,
- int *need_heavy_init)
+static void xusbatm_release_intf (struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
+{
+ if (claimed) {
+ usb_set_intfdata(intf, NULL);
+ usb_driver_release_interface(&xusbatm_usb_driver, intf);
+ }
+}
+
+static int xusbatm_bind(struct usbatm_data *usbatm,
+ struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
int drv_ix = id - xusbatm_usb_ids;
- int rx_ep_present = usb_intf_has_ep(intf, rx_endpoint[drv_ix]);
- int tx_ep_present = usb_intf_has_ep(intf, tx_endpoint[drv_ix]);
- u8 searched_ep = rx_ep_present ? tx_endpoint[drv_ix] : rx_endpoint[drv_ix];
- int i, ret;
+ int rx_alt = rx_altsetting[drv_ix];
+ int tx_alt = tx_altsetting[drv_ix];
+ struct usb_interface *rx_intf = xusbatm_find_intf(usb_dev, rx_alt, rx_endpoint[drv_ix]);
+ struct usb_interface *tx_intf = xusbatm_find_intf(usb_dev, tx_alt, tx_endpoint[drv_ix]);
+ int ret;
- usb_dbg(usbatm_instance, "%s: binding driver %d: vendor %#x product %#x"
- " rx: ep %#x padd %d tx: ep %#x padd %d\n",
+ usb_dbg(usbatm, "%s: binding driver %d: vendor %04x product %04x"
+ " rx: ep %02x padd %d alt %2d tx: ep %02x padd %d alt %2d\n",
__func__, drv_ix, vendor[drv_ix], product[drv_ix],
- rx_endpoint[drv_ix], rx_padding[drv_ix],
- tx_endpoint[drv_ix], tx_padding[drv_ix]);
+ rx_endpoint[drv_ix], rx_padding[drv_ix], rx_alt,
+ tx_endpoint[drv_ix], tx_padding[drv_ix], tx_alt);
- if (!rx_ep_present && !tx_ep_present) {
- usb_dbg(usbatm_instance, "%s: intf #%d has neither rx (%#x) nor tx (%#x) endpoint\n",
- __func__, intf->altsetting->desc.bInterfaceNumber,
- rx_endpoint[drv_ix], tx_endpoint[drv_ix]);
+ if (!rx_intf || !tx_intf) {
+ if (!rx_intf)
+ usb_dbg(usbatm, "%s: no interface contains endpoint %02x in altsetting %2d\n",
+ __func__, rx_endpoint[drv_ix], rx_alt);
+ if (!tx_intf)
+ usb_dbg(usbatm, "%s: no interface contains endpoint %02x in altsetting %2d\n",
+ __func__, tx_endpoint[drv_ix], tx_alt);
return -ENODEV;
}
- if (rx_ep_present && tx_ep_present)
- return 0;
+ if ((rx_intf != intf) && (tx_intf != intf))
+ return -ENODEV;
- for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *cur_if = usb_dev->actconfig->interface[i];
-
- if (cur_if != intf && usb_intf_has_ep(cur_if, searched_ep)) {
- ret = usb_driver_claim_interface(&xusbatm_usb_driver,
- cur_if, usbatm_instance);
- if (!ret)
- usb_err(usbatm_instance, "%s: failed to claim interface #%d (%d)\n",
- __func__, cur_if->altsetting->desc.bInterfaceNumber, ret);
- return ret;
- }
+ if ((rx_intf == tx_intf) && (rx_alt != tx_alt)) {
+ usb_err(usbatm, "%s: altsettings clash on interface %2d (%2d vs %2d)!\n", __func__,
+ rx_intf->altsetting->desc.bInterfaceNumber, rx_alt, tx_alt);
+ return -EINVAL;
}
- usb_err(usbatm_instance, "%s: no interface has endpoint %#x\n",
- __func__, searched_ep);
- return -ENODEV;
+ usb_dbg(usbatm, "%s: rx If#=%2d; tx If#=%2d\n", __func__,
+ rx_intf->altsetting->desc.bInterfaceNumber,
+ tx_intf->altsetting->desc.bInterfaceNumber);
+
+ if ((ret = xusbatm_capture_intf(usbatm, usb_dev, rx_intf, rx_alt, rx_intf != intf)))
+ return ret;
+
+ if ((tx_intf != rx_intf) && (ret = xusbatm_capture_intf(usbatm, usb_dev, tx_intf, tx_alt, tx_intf != intf))) {
+ xusbatm_release_intf(usb_dev, rx_intf, rx_intf != intf);
+ return ret;
+ }
+
+ return 0;
}
-static void xusbatm_unbind(struct usbatm_data *usbatm_instance,
+static void xusbatm_unbind(struct usbatm_data *usbatm,
struct usb_interface *intf)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
int i;
- usb_dbg(usbatm_instance, "%s entered\n", __func__);
+
+ usb_dbg(usbatm, "%s entered\n", __func__);
for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *cur_if = usb_dev->actconfig->interface[i];
- usb_set_intfdata(cur_if, NULL);
- usb_driver_release_interface(&xusbatm_usb_driver, cur_if);
+ struct usb_interface *cur_intf = usb_dev->actconfig->interface[i];
+
+ if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) {
+ usb_set_intfdata(cur_intf, NULL);
+ usb_driver_release_interface(&xusbatm_usb_driver, cur_intf);
+ }
}
}
-static int xusbatm_atm_start(struct usbatm_data *usbatm_instance,
+static int xusbatm_atm_start(struct usbatm_data *usbatm,
struct atm_dev *atm_dev)
{
- atm_dbg(usbatm_instance, "%s entered\n", __func__);
+ atm_dbg(usbatm, "%s entered\n", __func__);
/* use random MAC as we've no way to get it from the device */
random_ether_addr(atm_dev->esi);
@@ -161,18 +199,19 @@
}
for (i = 0; i < num_vendor; i++) {
+ rx_endpoint[i] |= USB_DIR_IN;
+ tx_endpoint[i] &= USB_ENDPOINT_NUMBER_MASK;
+
xusbatm_usb_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
xusbatm_usb_ids[i].idVendor = vendor[i];
xusbatm_usb_ids[i].idProduct = product[i];
-
- xusbatm_drivers[i].owner = THIS_MODULE;
xusbatm_drivers[i].driver_name = xusbatm_driver_name;
xusbatm_drivers[i].bind = xusbatm_bind;
xusbatm_drivers[i].unbind = xusbatm_unbind;
xusbatm_drivers[i].atm_start = xusbatm_atm_start;
- xusbatm_drivers[i].in = rx_endpoint[i];
- xusbatm_drivers[i].out = tx_endpoint[i];
+ xusbatm_drivers[i].bulk_in = rx_endpoint[i];
+ xusbatm_drivers[i].bulk_out = tx_endpoint[i];
xusbatm_drivers[i].rx_padding = rx_padding[i];
xusbatm_drivers[i].tx_padding = tx_padding[i];
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b9fd39f..97bdeb1 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1014,8 +1014,13 @@
}
down(&open_sem);
+ if (!usb_get_intfdata(intf)) {
+ up(&open_sem);
+ return;
+ }
acm->dev = NULL;
- usb_set_intfdata (intf, NULL);
+ usb_set_intfdata(acm->control, NULL);
+ usb_set_intfdata(acm->data, NULL);
tasklet_disable(&acm->urb_task);
@@ -1036,7 +1041,7 @@
for (i = 0; i < ACM_NRB; i++)
usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
- usb_driver_release_interface(&acm_driver, acm->data);
+ usb_driver_release_interface(&acm_driver, intf == acm->control ? acm->data : intf);
if (!acm->used) {
acm_tty_unregister(acm);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index dba4cc0..d34848a 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -7,6 +7,7 @@
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
# Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
# Copyright (c) 2001 David Paschal <paschal@rcsis.com>
+ * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name>
*
* USB Printer Device Class driver for USB printers and printer cables
*
@@ -273,13 +274,16 @@
{
struct usblp *usblp = urb->context;
- if (!usblp || !usblp->dev || !usblp->used || !usblp->present)
+ if (unlikely(!usblp || !usblp->dev || !usblp->used))
return;
+ if (unlikely(!usblp->present))
+ goto unplug;
if (unlikely(urb->status))
warn("usblp%d: nonzero read/write bulk status received: %d",
usblp->minor, urb->status);
usblp->rcomplete = 1;
+unplug:
wake_up_interruptible(&usblp->wait);
}
@@ -287,13 +291,15 @@
{
struct usblp *usblp = urb->context;
- if (!usblp || !usblp->dev || !usblp->used || !usblp->present)
+ if (unlikely(!usblp || !usblp->dev || !usblp->used))
return;
-
+ if (unlikely(!usblp->present))
+ goto unplug;
if (unlikely(urb->status))
warn("usblp%d: nonzero read/write bulk status received: %d",
usblp->minor, urb->status);
usblp->wcomplete = 1;
+unplug:
wake_up_interruptible(&usblp->wait);
}
@@ -627,9 +633,8 @@
static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
- DECLARE_WAITQUEUE(wait, current);
struct usblp *usblp = file->private_data;
- int timeout, err = 0, transfer_length = 0;
+ int timeout, rv, err = 0, transfer_length = 0;
size_t writecount = 0;
while (writecount < count) {
@@ -641,24 +646,11 @@
}
timeout = USBLP_WRITE_TIMEOUT;
- add_wait_queue(&usblp->wait, &wait);
- while ( 1==1 ) {
- if (signal_pending(current)) {
- remove_wait_queue(&usblp->wait, &wait);
- return writecount ? writecount : -EINTR;
- }
- set_current_state(TASK_INTERRUPTIBLE);
- if (timeout && !usblp->wcomplete) {
- timeout = schedule_timeout(timeout);
- } else {
- set_current_state(TASK_RUNNING);
- break;
- }
- }
- remove_wait_queue(&usblp->wait, &wait);
+ rv = wait_event_interruptible_timeout(usblp->wait, usblp->wcomplete || !usblp->present , timeout);
+ if (rv < 0)
+ return writecount ? writecount : -EINTR;
}
-
down (&usblp->sem);
if (!usblp->present) {
up (&usblp->sem);
@@ -724,7 +716,7 @@
static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
- DECLARE_WAITQUEUE(wait, current);
+ int rv;
if (!usblp->bidir)
return -EINVAL;
@@ -742,26 +734,13 @@
count = -EAGAIN;
goto done;
}
-
- add_wait_queue(&usblp->wait, &wait);
- while (1==1) {
- if (signal_pending(current)) {
- count = -EINTR;
- remove_wait_queue(&usblp->wait, &wait);
- goto done;
- }
- up (&usblp->sem);
- set_current_state(TASK_INTERRUPTIBLE);
- if (!usblp->rcomplete) {
- schedule();
- } else {
- set_current_state(TASK_RUNNING);
- down(&usblp->sem);
- break;
- }
- down (&usblp->sem);
+ up(&usblp->sem);
+ rv = wait_event_interruptible(usblp->wait, usblp->rcomplete || !usblp->present);
+ down(&usblp->sem);
+ if (rv < 0) {
+ count = -EINTR;
+ goto done;
}
- remove_wait_queue(&usblp->wait, &wait);
}
if (!usblp->present) {
@@ -874,11 +853,10 @@
/* Malloc and start initializing usblp structure so we can use it
* directly. */
- if (!(usblp = kmalloc(sizeof(struct usblp), GFP_KERNEL))) {
+ if (!(usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL))) {
err("out of memory for usblp");
goto abort;
}
- memset(usblp, 0, sizeof(struct usblp));
usblp->dev = dev;
init_MUTEX (&usblp->sem);
init_waitqueue_head(&usblp->wait);
@@ -1214,10 +1192,9 @@
{
int retval;
retval = usb_register(&usblp_driver);
- if (retval)
- goto out;
- info(DRIVER_VERSION ": " DRIVER_DESC);
-out:
+ if (!retval)
+ info(DRIVER_VERSION ": " DRIVER_DESC);
+
return retval;
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 319de03..7135e54 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -13,6 +13,7 @@
#include <linux/ctype.h>
#include <linux/device.h>
#include <asm/byteorder.h>
+#include <asm/scatterlist.h>
#include "hcd.h" /* for usbcore internals */
#include "usb.h"
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 0817967..dad4d8f 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -468,6 +468,7 @@
*/
void usb_kill_urb(struct urb *urb)
{
+ might_sleep();
if (!(urb && urb->dev && urb->dev->bus && urb->dev->bus->op))
return;
spin_lock_irq(&urb->lock);
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 9a4edc5..0aab7d2 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -135,6 +135,7 @@
setup_out_ready : 1,
setup_out_error : 1,
setup_abort : 1;
+ unsigned setup_wLength;
/* the rest is basically write-once */
struct usb_config_descriptor *config, *hs_config;
@@ -942,6 +943,7 @@
}
req->complete = ep0_complete;
req->length = len;
+ req->zero = 0;
return 0;
}
@@ -1161,10 +1163,13 @@
spin_unlock_irq (&dev->lock);
if (copy_from_user (dev->req->buf, buf, len))
retval = -EFAULT;
- else
+ else {
+ if (len < dev->setup_wLength)
+ dev->req->zero = 1;
retval = usb_ep_queue (
dev->gadget->ep0, dev->req,
GFP_KERNEL);
+ }
if (retval < 0) {
spin_lock_irq (&dev->lock);
clean_req (dev->gadget->ep0, dev->req);
@@ -1483,6 +1488,7 @@
delegate:
dev->setup_in = (ctrl->bRequestType & USB_DIR_IN)
? 1 : 0;
+ dev->setup_wLength = w_length;
dev->setup_out_ready = 0;
dev->setup_out_error = 0;
value = 0;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index c32e1f7..67b13ab 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -47,6 +47,7 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 2fc110d..ae7a1c0 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -165,8 +165,8 @@
static unsigned qlen = 32;
static unsigned pattern = 0;
-module_param (buflen, uint, S_IRUGO|S_IWUSR);
-module_param (qlen, uint, S_IRUGO|S_IWUSR);
+module_param (buflen, uint, S_IRUGO);
+module_param (qlen, uint, S_IRUGO);
module_param (pattern, uint, S_IRUGO|S_IWUSR);
/*
@@ -1127,8 +1127,10 @@
DBG (dev, "unbind\n");
/* we've already been disconnected ... no i/o is active */
- if (dev->req)
+ if (dev->req) {
+ dev->req->length = USB_BUFSIZ;
free_ep_req (gadget->ep0, dev->req);
+ }
del_timer_sync (&dev->resume);
kfree (dev);
set_gadget_data (gadget, NULL);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 08ca0f8..3a6687d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -24,46 +24,11 @@
/*-------------------------------------------------------------------------*/
-/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
- * off the controller (maybe it can boot from highspeed USB disks).
- */
-static int bios_handoff(struct ehci_hcd *ehci, int where, u32 cap)
-{
- struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
-
- /* always say Linux will own the hardware */
- pci_write_config_byte(pdev, where + 3, 1);
-
- /* maybe wait a while for BIOS to respond */
- if (cap & (1 << 16)) {
- int msec = 5000;
-
- do {
- msleep(10);
- msec -= 10;
- pci_read_config_dword(pdev, where, &cap);
- } while ((cap & (1 << 16)) && msec);
- if (cap & (1 << 16)) {
- ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
- where, cap);
- // some BIOS versions seem buggy...
- // return 1;
- ehci_warn(ehci, "continuing after BIOS bug...\n");
- /* disable all SMIs, and clear "BIOS owns" flag */
- pci_write_config_dword(pdev, where + 4, 0);
- pci_write_config_byte(pdev, where + 2, 0);
- } else
- ehci_dbg(ehci, "BIOS handoff succeeded\n");
- }
- return 0;
-}
-
/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
{
u32 temp;
int retval;
- unsigned count = 256/4;
/* optional debug port, normally in the first BAR */
temp = pci_find_capability(pdev, 0x0a);
@@ -84,32 +49,9 @@
}
}
- temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params));
-
- /* EHCI 0.96 and later may have "extended capabilities" */
- while (temp && count--) {
- u32 cap;
-
- pci_read_config_dword(pdev, temp, &cap);
- ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp);
- switch (cap & 0xff) {
- case 1: /* BIOS/SMM/... handoff */
- if (bios_handoff(ehci, temp, cap) != 0)
- return -EOPNOTSUPP;
- break;
- case 0: /* illegal reserved capability */
- ehci_dbg(ehci, "illegal capability!\n");
- cap = 0;
- /* FALLTHROUGH */
- default: /* unknown */
- break;
- }
- temp = (cap >> 8) & 0xff;
- }
- if (!count) {
- ehci_err(ehci, "bogus capabilities ... PCI problems!\n");
- return -EIO;
- }
+ /* we expect static quirk code to handle the "extended capabilities"
+ * (currently just BIOS handoff) allowed starting with EHCI 0.96
+ */
/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
retval = pci_set_mwi(pdev);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 57e7737..ebcca97 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1063,6 +1063,7 @@
/* for IN, check CSPLIT */
if (stream->c_usecs) {
+ uf = uframe & 7;
max_used = 100 - stream->c_usecs;
do {
tmp = 1 << uf;
@@ -1843,8 +1844,7 @@
#else
static inline int
-sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
- unsigned mem_flags)
+sitd_submit (struct ehci_hcd *ehci, struct urb *urb, gfp_t mem_flags)
{
ehci_dbg (ehci, "split iso support is disabled\n");
return -ENOSYS;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 584b8dc..972ce04 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1420,20 +1420,22 @@
int ret = 0;
spin_lock_irqsave(&isp116x->lock, flags);
-
val = isp116x_read_reg32(isp116x, HCCONTROL);
+
switch (val & HCCONTROL_HCFS) {
case HCCONTROL_USB_OPER:
+ spin_unlock_irqrestore(&isp116x->lock, flags);
val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
val |= HCCONTROL_USB_SUSPEND;
if (device_may_wakeup(&hcd->self.root_hub->dev))
val |= HCCONTROL_RWE;
/* Wait for usb transfers to finish */
- mdelay(2);
+ msleep(2);
+ spin_lock_irqsave(&isp116x->lock, flags);
isp116x_write_reg32(isp116x, HCCONTROL, val);
+ spin_unlock_irqrestore(&isp116x->lock, flags);
/* Wait for devices to suspend */
- mdelay(5);
- case HCCONTROL_USB_SUSPEND:
+ msleep(5);
break;
case HCCONTROL_USB_RESUME:
isp116x_write_reg32(isp116x, HCCONTROL,
@@ -1441,12 +1443,11 @@
HCCONTROL_USB_RESET);
case HCCONTROL_USB_RESET:
ret = -EBUSY;
+ default: /* HCCONTROL_USB_SUSPEND */
+ spin_unlock_irqrestore(&isp116x->lock, flags);
break;
- default:
- ret = -EINVAL;
}
- spin_unlock_irqrestore(&isp116x->lock, flags);
return ret;
}
@@ -1715,9 +1716,9 @@
.remove = isp116x_remove,
.suspend = isp116x_suspend,
.resume = isp116x_resume,
- .driver = {
- .name = (char *)hcd_name,
- },
+ .driver = {
+ .name = (char *)hcd_name,
+ },
};
/*-----------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 77cd6ac..db280ca 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -67,7 +67,7 @@
": stopping Au1xxx OHCI USB Controller\n");
/* Disable clock */
- au_writel(readl((void *)USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
+ au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
}
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 3ef2c0c..e9e5bc1 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -190,7 +190,7 @@
msleep(10);
}
if (wait_time <= 0)
- printk(KERN_WARNING "%s %s: early BIOS handoff "
+ printk(KERN_WARNING "%s %s: BIOS handoff "
"failed (BIOS bug ?)\n",
pdev->dev.bus_id, "OHCI");
@@ -212,8 +212,9 @@
{
int wait_time, delta;
void __iomem *base, *op_reg_base;
- u32 hcc_params, val, temp;
- u8 cap_length;
+ u32 hcc_params, val;
+ u8 offset, cap_length;
+ int count = 256/4;
if (!mmio_resource_enabled(pdev, 0))
return;
@@ -224,51 +225,80 @@
cap_length = readb(base);
op_reg_base = base + cap_length;
- hcc_params = readl(base + EHCI_HCC_PARAMS);
- hcc_params = (hcc_params >> 8) & 0xff;
- if (hcc_params) {
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
- /*
- * Ok, BIOS is in smm mode, try to hand off...
- */
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- &temp);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- temp | EHCI_USBLEGCTLSTS_SOOE);
- val |= EHCI_USBLEGSUP_OS;
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- val);
- wait_time = 500;
- do {
- msleep(10);
- wait_time -= 10;
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
- if (!wait_time) {
- /*
- * well, possibly buggy BIOS...
+ /* EHCI 0.96 and later may have "extended capabilities"
+ * spec section 5.1 explains the bios handoff, e.g. for
+ * booting from USB disk or using a usb keyboard
+ */
+ hcc_params = readl(base + EHCI_HCC_PARAMS);
+ offset = (hcc_params >> 8) & 0xff;
+ while (offset && count--) {
+ u32 cap;
+ int msec;
+
+ pci_read_config_dword(pdev, offset, &cap);
+ switch (cap & 0xff) {
+ case 1: /* BIOS/SMM/... handoff support */
+ if ((cap & EHCI_USBLEGSUP_BIOS)) {
+ pr_debug("%s %s: BIOS handoff\n",
+ pdev->dev.bus_id, "EHCI");
+
+ /* BIOS workaround (?): be sure the
+ * pre-Linux code receives the SMI
*/
- printk(KERN_WARNING "%s %s: early BIOS handoff "
+ pci_read_config_dword(pdev,
+ offset + EHCI_USBLEGCTLSTS,
+ &val);
+ pci_write_config_dword(pdev,
+ offset + EHCI_USBLEGCTLSTS,
+ val | EHCI_USBLEGCTLSTS_SOOE);
+ }
+
+ /* always say Linux will own the hardware
+ * by setting EHCI_USBLEGSUP_OS.
+ */
+ pci_write_config_byte(pdev, offset + 3, 1);
+
+ /* if boot firmware now owns EHCI, spin till
+ * it hands it over.
+ */
+ msec = 5000;
+ while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+ msleep(10);
+ msec -= 10;
+ pci_read_config_dword(pdev, offset, &cap);
+ }
+
+ if (cap & EHCI_USBLEGSUP_BIOS) {
+ /* well, possibly buggy BIOS... try to shut
+ * it down, and hope nothing goes too wrong
+ */
+ printk(KERN_WARNING "%s %s: BIOS handoff "
"failed (BIOS bug ?)\n",
pdev->dev.bus_id, "EHCI");
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- EHCI_USBLEGSUP_OS);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- 0);
+ pci_write_config_byte(pdev, offset + 2, 0);
}
+
+ /* just in case, always disable EHCI SMIs */
+ pci_write_config_dword(pdev,
+ offset + EHCI_USBLEGCTLSTS,
+ 0);
+ break;
+ case 0: /* illegal reserved capability */
+ cap = 0;
+ /* FALLTHROUGH */
+ default:
+ printk(KERN_WARNING "%s %s: unrecognized "
+ "capability %02x\n",
+ pdev->dev.bus_id, "EHCI",
+ cap & 0xff);
+ break;
}
+ offset = (cap >> 8) & 0xff;
}
+ if (!count)
+ printk(KERN_DEBUG "%s %s: capability loop?\n",
+ pdev->dev.bus_id, "EHCI");
/*
* halt EHCI & disable its interrupts in any case
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index b607600..7823980 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -672,9 +672,9 @@
/* Low-speed transfers get a different queue, and won't hog the bus.
* Also, some devices enumerate better without FSBR; the easiest way
* to do that is to put URBs on the low-speed queue while the device
- * is in the DEFAULT state. */
+ * isn't in the CONFIGURED state. */
if (urb->dev->speed == USB_SPEED_LOW ||
- urb->dev->state == USB_STATE_DEFAULT)
+ urb->dev->state != USB_STATE_CONFIGURED)
skelqh = uhci->skel_ls_control_qh;
else {
skelqh = uhci->skel_fs_control_qh;
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index a91e72c..6f7a684 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1307,7 +1307,7 @@
}
if (err)
- warn("timeout initializing reports\n");
+ warn("timeout initializing reports");
}
#define USB_VENDOR_ID_WACOM 0x056a
@@ -1453,6 +1453,9 @@
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
+#define USB_VENDOR_ID_HP 0x03f0
+#define USB_DEVICE_ID_HP_USBHUB_KB 0x020c
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
@@ -1566,6 +1569,7 @@
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_KEYBOARD, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
+ { USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
@@ -1828,9 +1832,6 @@
hid->urbctrl->transfer_dma = hid->ctrlbuf_dma;
hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
- /* May be needed for some devices */
- usb_clear_halt(hid->dev, hid->urbin->pipe);
-
return hid;
fail:
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 4dff847..77be6b9 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -35,7 +35,6 @@
#include <linux/usb.h>
#include "hid.h"
#include <linux/hiddev.h>
-#include <linux/devfs_fs_kernel.h>
#ifdef CONFIG_USB_DYNAMIC_MINORS
#define HIDDEV_MINOR_BASE 0
@@ -832,12 +831,10 @@
int __init hiddev_init(void)
{
- devfs_mk_dir("usb/hid");
return usb_register(&hiddev_driver);
}
void hiddev_exit(void)
{
usb_deregister(&hiddev_driver);
- devfs_remove("usb/hid");
}
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 3b3c7b4..697c5e5 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -337,6 +337,9 @@
touchkit->data, TOUCHKIT_REPORT_DATA_SIZE,
touchkit_irq, touchkit, endpoint->bInterval);
+ touchkit->irq->transfer_dma = touchkit->data_dma;
+ touchkit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
input_register_device(touchkit->input);
usb_set_intfdata(intf, touchkit);
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 1bfc105..37d2f0b 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -59,7 +59,7 @@
#include "map_to_7segment.h"
#include "yealink.h"
-#define DRIVER_VERSION "yld-20050816"
+#define DRIVER_VERSION "yld-20051230"
#define DRIVER_AUTHOR "Henk Vergonet"
#define DRIVER_DESC "Yealink phone driver"
@@ -786,16 +786,25 @@
* Linux interface and usb initialisation
******************************************************************************/
-static const struct yld_device {
- u16 idVendor;
- u16 idProduct;
+struct driver_info {
char *name;
-} yld_device[] = {
- { 0x6993, 0xb001, "Yealink usb-p1k" },
};
-static struct usb_device_id usb_table [] = {
- { USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
+static const struct driver_info info_P1K = {
+ .name = "Yealink usb-p1k",
+};
+
+static const struct usb_device_id usb_table [] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x6993,
+ .idProduct = 0xb001,
+ .bInterfaceClass = USB_CLASS_HID,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .driver_info = (kernel_ulong_t)&info_P1K
+ },
{ }
};
@@ -842,33 +851,16 @@
usb_cleanup(yld, 0);
}
-static int usb_match(struct usb_device *udev)
-{
- int i;
- u16 idVendor = le16_to_cpu(udev->descriptor.idVendor);
- u16 idProduct = le16_to_cpu(udev->descriptor.idProduct);
-
- for (i = 0; i < ARRAY_SIZE(yld_device); i++) {
- if ((idVendor == yld_device[i].idVendor) &&
- (idProduct == yld_device[i].idProduct))
- return i;
- }
- return -ENODEV;
-}
-
static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev (intf);
+ struct driver_info *nfo = (struct driver_info *)id->driver_info;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct yealink_dev *yld;
struct input_dev *input_dev;
int ret, pipe, i;
- i = usb_match(udev);
- if (i < 0)
- return -ENODEV;
-
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
if (!(endpoint->bEndpointAddress & USB_DIR_IN))
@@ -915,7 +907,7 @@
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
if (ret != USB_PKT_LEN)
- err("invalid payload size %d, expected %d", ret, USB_PKT_LEN);
+ err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN);
/* initialise irq urb */
usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
@@ -948,7 +940,7 @@
strlcat(yld->phys, "/input0", sizeof(yld->phys));
/* register settings for the input device */
- input_dev->name = yld_device[i].name;
+ input_dev->name = nfo->name;
input_dev->phys = yld->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->cdev.dev = &intf->dev;
diff --git a/drivers/usb/media/Kconfig b/drivers/usb/media/Kconfig
index 21232ee..0d3d2cc 100644
--- a/drivers/usb/media/Kconfig
+++ b/drivers/usb/media/Kconfig
@@ -53,6 +53,21 @@
To compile this driver as a module, choose M here: the
module will be called dsbr100.
+config USB_ET61X251
+ tristate "USB ET61X[12]51 PC Camera Controller support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want support for cameras based on Etoms ET61X151
+ or ET61X251 PC Camera Controllers.
+
+ See <file:Documentation/usb/et61x251.txt> for more informations.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" to use this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called et61x251.
+
config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
depends on USB && VIDEO_DEV
@@ -209,5 +224,3 @@
To compile this driver as a module, choose M here: the
module will be called pwc.
-
-
diff --git a/drivers/usb/media/Makefile b/drivers/usb/media/Makefile
index d83adff..3957aa1 100644
--- a/drivers/usb/media/Makefile
+++ b/drivers/usb/media/Makefile
@@ -3,9 +3,11 @@
#
sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o
+et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
+obj-$(CONFIG_USB_ET61X251) += et61x251.o
obj-$(CONFIG_USB_IBMCAM) += ibmcam.o usbvideo.o ultracam.o
obj-$(CONFIG_USB_KONICAWC) += konicawc.o usbvideo.o
obj-$(CONFIG_USB_OV511) += ov511.o
diff --git a/drivers/usb/media/et61x251.h b/drivers/usb/media/et61x251.h
new file mode 100644
index 0000000..652238f
--- /dev/null
+++ b/drivers/usb/media/et61x251.h
@@ -0,0 +1,220 @@
+/***************************************************************************
+ * V4L2 driver for ET61X[12]51 PC Camera Controllers *
+ * *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#ifndef _ET61X251_H_
+#define _ET61X251_H_
+
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <linux/param.h>
+#include <linux/rwsem.h>
+#include <asm/semaphore.h>
+
+#include "et61x251_sensor.h"
+
+/*****************************************************************************/
+
+#define ET61X251_DEBUG
+#define ET61X251_DEBUG_LEVEL 2
+#define ET61X251_MAX_DEVICES 64
+#define ET61X251_PRESERVE_IMGSCALE 0
+#define ET61X251_FORCE_MUNMAP 0
+#define ET61X251_MAX_FRAMES 32
+#define ET61X251_COMPRESSION_QUALITY 0
+#define ET61X251_URBS 2
+#define ET61X251_ISO_PACKETS 7
+#define ET61X251_ALTERNATE_SETTING 13
+#define ET61X251_URB_TIMEOUT msecs_to_jiffies(2 * ET61X251_ISO_PACKETS)
+#define ET61X251_CTRL_TIMEOUT 100
+
+/*****************************************************************************/
+
+static const struct usb_device_id et61x251_id_table[] = {
+ { USB_DEVICE(0x102c, 0x6151), },
+ { USB_DEVICE(0x102c, 0x6251), },
+ { USB_DEVICE(0x102c, 0x6253), },
+ { USB_DEVICE(0x102c, 0x6254), },
+ { USB_DEVICE(0x102c, 0x6255), },
+ { USB_DEVICE(0x102c, 0x6256), },
+ { USB_DEVICE(0x102c, 0x6257), },
+ { USB_DEVICE(0x102c, 0x6258), },
+ { USB_DEVICE(0x102c, 0x6259), },
+ { USB_DEVICE(0x102c, 0x625a), },
+ { USB_DEVICE(0x102c, 0x625b), },
+ { USB_DEVICE(0x102c, 0x625c), },
+ { USB_DEVICE(0x102c, 0x625d), },
+ { USB_DEVICE(0x102c, 0x625e), },
+ { USB_DEVICE(0x102c, 0x625f), },
+ { USB_DEVICE(0x102c, 0x6260), },
+ { USB_DEVICE(0x102c, 0x6261), },
+ { USB_DEVICE(0x102c, 0x6262), },
+ { USB_DEVICE(0x102c, 0x6263), },
+ { USB_DEVICE(0x102c, 0x6264), },
+ { USB_DEVICE(0x102c, 0x6265), },
+ { USB_DEVICE(0x102c, 0x6266), },
+ { USB_DEVICE(0x102c, 0x6267), },
+ { USB_DEVICE(0x102c, 0x6268), },
+ { USB_DEVICE(0x102c, 0x6269), },
+ { }
+};
+
+ET61X251_SENSOR_TABLE
+
+/*****************************************************************************/
+
+enum et61x251_frame_state {
+ F_UNUSED,
+ F_QUEUED,
+ F_GRABBING,
+ F_DONE,
+ F_ERROR,
+};
+
+struct et61x251_frame_t {
+ void* bufmem;
+ struct v4l2_buffer buf;
+ enum et61x251_frame_state state;
+ struct list_head frame;
+ unsigned long vma_use_count;
+};
+
+enum et61x251_dev_state {
+ DEV_INITIALIZED = 0x01,
+ DEV_DISCONNECTED = 0x02,
+ DEV_MISCONFIGURED = 0x04,
+};
+
+enum et61x251_io_method {
+ IO_NONE,
+ IO_READ,
+ IO_MMAP,
+};
+
+enum et61x251_stream_state {
+ STREAM_OFF,
+ STREAM_INTERRUPT,
+ STREAM_ON,
+};
+
+struct et61x251_sysfs_attr {
+ u8 reg, i2c_reg;
+};
+
+struct et61x251_module_param {
+ u8 force_munmap;
+};
+
+static DECLARE_MUTEX(et61x251_sysfs_lock);
+static DECLARE_RWSEM(et61x251_disconnect);
+
+struct et61x251_device {
+ struct video_device* v4ldev;
+
+ struct et61x251_sensor* sensor;
+
+ struct usb_device* usbdev;
+ struct urb* urb[ET61X251_URBS];
+ void* transfer_buffer[ET61X251_URBS];
+ u8* control_buffer;
+
+ struct et61x251_frame_t *frame_current, frame[ET61X251_MAX_FRAMES];
+ struct list_head inqueue, outqueue;
+ u32 frame_count, nbuffers, nreadbuffers;
+
+ enum et61x251_io_method io;
+ enum et61x251_stream_state stream;
+
+ struct v4l2_jpegcompression compression;
+
+ struct et61x251_sysfs_attr sysfs;
+ struct et61x251_module_param module_param;
+
+ enum et61x251_dev_state state;
+ u8 users;
+
+ struct semaphore dev_sem, fileop_sem;
+ spinlock_t queue_lock;
+ wait_queue_head_t open, wait_frame, wait_stream;
+};
+
+/*****************************************************************************/
+
+void
+et61x251_attach_sensor(struct et61x251_device* cam,
+ struct et61x251_sensor* sensor)
+{
+ cam->sensor = sensor;
+ cam->sensor->usbdev = cam->usbdev;
+}
+
+/*****************************************************************************/
+
+#undef DBG
+#undef KDBG
+#ifdef ET61X251_DEBUG
+# define DBG(level, fmt, args...) \
+do { \
+ if (debug >= (level)) { \
+ if ((level) == 1) \
+ dev_err(&cam->usbdev->dev, fmt "\n", ## args); \
+ else if ((level) == 2) \
+ dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
+ else if ((level) >= 3) \
+ dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
+ __FUNCTION__, __LINE__ , ## args); \
+ } \
+} while (0)
+# define KDBG(level, fmt, args...) \
+do { \
+ if (debug >= (level)) { \
+ if ((level) == 1 || (level) == 2) \
+ pr_info("et61x251: " fmt "\n", ## args); \
+ else if ((level) == 3) \
+ pr_debug("et61x251: [%s:%d] " fmt "\n", __FUNCTION__, \
+ __LINE__ , ## args); \
+ } \
+} while (0)
+# define V4LDBG(level, name, cmd) \
+do { \
+ if (debug >= (level)) \
+ v4l_print_ioctl(name, cmd); \
+} while (0)
+#else
+# define DBG(level, fmt, args...) do {;} while(0)
+# define KDBG(level, fmt, args...) do {;} while(0)
+# define V4LDBG(level, name, cmd) do {;} while(0)
+#endif
+
+#undef PDBG
+#define PDBG(fmt, args...) \
+dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
+
+#undef PDBGG
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
+
+#endif /* _ET61X251_H_ */
diff --git a/drivers/usb/media/et61x251_core.c b/drivers/usb/media/et61x251_core.c
new file mode 100644
index 0000000..2c0171a
--- /dev/null
+++ b/drivers/usb/media/et61x251_core.c
@@ -0,0 +1,2605 @@
+/***************************************************************************
+ * V4L2 driver for ET61X[12]51 PC Camera Controllers *
+ * *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/page-flags.h>
+#include <linux/byteorder/generic.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+#include "et61x251.h"
+
+/*****************************************************************************/
+
+#define ET61X251_MODULE_NAME "V4L2 driver for ET61X[12]51 " \
+ "PC Camera Controllers"
+#define ET61X251_MODULE_AUTHOR "(C) 2006 Luca Risolia"
+#define ET61X251_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
+#define ET61X251_MODULE_LICENSE "GPL"
+#define ET61X251_MODULE_VERSION "1:1.01"
+#define ET61X251_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 1)
+
+/*****************************************************************************/
+
+MODULE_DEVICE_TABLE(usb, et61x251_id_table);
+
+MODULE_AUTHOR(ET61X251_MODULE_AUTHOR " " ET61X251_AUTHOR_EMAIL);
+MODULE_DESCRIPTION(ET61X251_MODULE_NAME);
+MODULE_VERSION(ET61X251_MODULE_VERSION);
+MODULE_LICENSE(ET61X251_MODULE_LICENSE);
+
+static short video_nr[] = {[0 ... ET61X251_MAX_DEVICES-1] = -1};
+module_param_array(video_nr, short, NULL, 0444);
+MODULE_PARM_DESC(video_nr,
+ "\n<-1|n[,...]> Specify V4L2 minor mode number."
+ "\n -1 = use next available (default)"
+ "\n n = use minor number n (integer >= 0)"
+ "\nYou can specify up to "
+ __MODULE_STRING(ET61X251_MAX_DEVICES) " cameras this way."
+ "\nFor example:"
+ "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+ "\nthe second registered camera and use auto for the first"
+ "\none and for every other camera."
+ "\n");
+
+static short force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] =
+ ET61X251_FORCE_MUNMAP};
+module_param_array(force_munmap, bool, NULL, 0444);
+MODULE_PARM_DESC(force_munmap,
+ "\n<0|1[,...]> Force the application to unmap previously"
+ "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+ "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+ "\nthis feature. This parameter is specific for each"
+ "\ndetected camera."
+ "\n 0 = do not force memory unmapping"
+ "\n 1 = force memory unmapping (save memory)"
+ "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+ "\n");
+
+#ifdef ET61X251_DEBUG
+static unsigned short debug = ET61X251_DEBUG_LEVEL;
+module_param(debug, ushort, 0644);
+MODULE_PARM_DESC(debug,
+ "\n<n> Debugging information level, from 0 to 3:"
+ "\n0 = none (use carefully)"
+ "\n1 = critical errors"
+ "\n2 = significant informations"
+ "\n3 = more verbose messages"
+ "\nLevel 3 is useful for testing only, when only "
+ "one device is used."
+ "\nDefault value is "__MODULE_STRING(ET61X251_DEBUG_LEVEL)"."
+ "\n");
+#endif
+
+/*****************************************************************************/
+
+static u32
+et61x251_request_buffers(struct et61x251_device* cam, u32 count,
+ enum et61x251_io_method io)
+{
+ struct v4l2_pix_format* p = &(cam->sensor->pix_format);
+ struct v4l2_rect* r = &(cam->sensor->cropcap.bounds);
+ const size_t imagesize = cam->module_param.force_munmap ||
+ io == IO_READ ?
+ (p->width * p->height * p->priv) / 8 :
+ (r->width * r->height * p->priv) / 8;
+ void* buff = NULL;
+ u32 i;
+
+ if (count > ET61X251_MAX_FRAMES)
+ count = ET61X251_MAX_FRAMES;
+
+ cam->nbuffers = count;
+ while (cam->nbuffers > 0) {
+ if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+ break;
+ cam->nbuffers--;
+ }
+
+ for (i = 0; i < cam->nbuffers; i++) {
+ cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
+ cam->frame[i].buf.index = i;
+ cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
+ cam->frame[i].buf.length = imagesize;
+ cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ cam->frame[i].buf.sequence = 0;
+ cam->frame[i].buf.field = V4L2_FIELD_NONE;
+ cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
+ cam->frame[i].buf.flags = 0;
+ }
+
+ return cam->nbuffers;
+}
+
+
+static void et61x251_release_buffers(struct et61x251_device* cam)
+{
+ if (cam->nbuffers) {
+ vfree(cam->frame[0].bufmem);
+ cam->nbuffers = 0;
+ }
+ cam->frame_current = NULL;
+}
+
+
+static void et61x251_empty_framequeues(struct et61x251_device* cam)
+{
+ u32 i;
+
+ INIT_LIST_HEAD(&cam->inqueue);
+ INIT_LIST_HEAD(&cam->outqueue);
+
+ for (i = 0; i < ET61X251_MAX_FRAMES; i++) {
+ cam->frame[i].state = F_UNUSED;
+ cam->frame[i].buf.bytesused = 0;
+ }
+}
+
+
+static void et61x251_requeue_outqueue(struct et61x251_device* cam)
+{
+ struct et61x251_frame_t *i;
+
+ list_for_each_entry(i, &cam->outqueue, frame) {
+ i->state = F_QUEUED;
+ list_add(&i->frame, &cam->inqueue);
+ }
+
+ INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
+static void et61x251_queue_unusedframes(struct et61x251_device* cam)
+{
+ unsigned long lock_flags;
+ u32 i;
+
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].state == F_UNUSED) {
+ cam->frame[i].state = F_QUEUED;
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_add_tail(&cam->frame[i].frame, &cam->inqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+ }
+}
+
+/*****************************************************************************/
+
+int et61x251_write_reg(struct et61x251_device* cam, u8 value, u16 index)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* buff = cam->control_buffer;
+ int res;
+
+ *buff = value;
+
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0) {
+ DBG(3, "Failed to write a register (value 0x%02X, index "
+ "0x%02X, error %d)", value, index, res);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+int et61x251_read_reg(struct et61x251_device* cam, u16 index)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* buff = cam->control_buffer;
+ int res;
+
+ res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+ 0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ DBG(3, "Failed to read a register (index 0x%02X, error %d)",
+ index, res);
+
+ return (res >= 0) ? (int)(*buff) : -1;
+}
+
+
+static int
+et61x251_i2c_wait(struct et61x251_device* cam, struct et61x251_sensor* sensor)
+{
+ int i, r;
+
+ for (i = 1; i <= 8; i++) {
+ if (sensor->interface == ET61X251_I2C_3WIRES) {
+ r = et61x251_read_reg(cam, 0x8e);
+ if (!(r & 0x02) && (r >= 0))
+ return 0;
+ } else {
+ r = et61x251_read_reg(cam, 0x8b);
+ if (!(r & 0x01) && (r >= 0))
+ return 0;
+ }
+ if (r < 0)
+ return -EIO;
+ udelay(8*8); /* minimum for sensors at 400kHz */
+ }
+
+ return -EBUSY;
+}
+
+
+int
+et61x251_i2c_try_read(struct et61x251_device* cam,
+ struct et61x251_sensor* sensor, u8 address)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* data = cam->control_buffer;
+ int err = 0, res;
+
+ data[0] = address;
+ data[1] = cam->sensor->i2c_slave_id;
+ data[2] = cam->sensor->rsta | 0x10;
+ data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02);
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ err += et61x251_i2c_wait(cam, sensor);
+
+ res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+ 0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ if (err)
+ DBG(3, "I2C read failed for %s image sensor", sensor->name);
+
+ PDBGG("I2C read: address 0x%02X, value: 0x%02X", address, data[0]);
+
+ return err ? -1 : (int)data[0];
+}
+
+
+int
+et61x251_i2c_try_write(struct et61x251_device* cam,
+ struct et61x251_sensor* sensor, u8 address, u8 value)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* data = cam->control_buffer;
+ int err = 0, res;
+
+ data[0] = address;
+ data[1] = cam->sensor->i2c_slave_id;
+ data[2] = cam->sensor->rsta | 0x12;
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ data[0] = value;
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ err += et61x251_i2c_wait(cam, sensor);
+
+ if (err)
+ DBG(3, "I2C write failed for %s image sensor", sensor->name);
+
+ PDBGG("I2C write: address 0x%02X, value: 0x%02X", address, value);
+
+ return err ? -1 : 0;
+}
+
+
+int
+et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
+ u8 data3, u8 data4, u8 data5, u8 data6, u8 data7,
+ u8 data8, u8 address)
+{
+ struct usb_device* udev = cam->usbdev;
+ u8* data = cam->control_buffer;
+ int err = 0, res;
+
+ if (!cam->sensor)
+ return -1;
+
+ data[0] = data2;
+ data[1] = data3;
+ data[2] = data4;
+ data[3] = data5;
+ data[4] = data6;
+ data[5] = data7;
+ data[6] = data8;
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x81, data, n-1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ data[0] = address;
+ data[1] = cam->sensor->i2c_slave_id;
+ data[2] = cam->sensor->rsta | 0x02 | (n << 4);
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ /* Start writing through the serial interface */
+ data[0] = data1;
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+ 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+ if (res < 0)
+ err += res;
+
+ err += et61x251_i2c_wait(cam, cam->sensor);
+
+ if (err)
+ DBG(3, "I2C raw write failed for %s image sensor",
+ cam->sensor->name);
+
+ PDBGG("I2C raw write: %u bytes, address = 0x%02X, data1 = 0x%02X, "
+ "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X,"
+ " data6 = 0x%02X, data7 = 0x%02X, data8 = 0x%02X", n, address,
+ data1, data2, data3, data4, data5, data6, data7, data8);
+
+ return err ? -1 : 0;
+
+}
+
+
+int et61x251_i2c_read(struct et61x251_device* cam, u8 address)
+{
+ if (!cam->sensor)
+ return -1;
+
+ return et61x251_i2c_try_read(cam, cam->sensor, address);
+}
+
+
+int et61x251_i2c_write(struct et61x251_device* cam, u8 address, u8 value)
+{
+ if (!cam->sensor)
+ return -1;
+
+ return et61x251_i2c_try_write(cam, cam->sensor, address, value);
+}
+
+/*****************************************************************************/
+
+static void et61x251_urb_complete(struct urb *urb, struct pt_regs* regs)
+{
+ struct et61x251_device* cam = urb->context;
+ struct et61x251_frame_t** f;
+ size_t imagesize;
+ u8 i;
+ int err = 0;
+
+ if (urb->status == -ENOENT)
+ return;
+
+ f = &cam->frame_current;
+
+ if (cam->stream == STREAM_INTERRUPT) {
+ cam->stream = STREAM_OFF;
+ if ((*f))
+ (*f)->state = F_QUEUED;
+ DBG(3, "Stream interrupted");
+ wake_up_interruptible(&cam->wait_stream);
+ }
+
+ if (cam->state & DEV_DISCONNECTED)
+ return;
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ wake_up_interruptible(&cam->wait_frame);
+ return;
+ }
+
+ if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
+ goto resubmit_urb;
+
+ if (!(*f))
+ (*f) = list_entry(cam->inqueue.next, struct et61x251_frame_t,
+ frame);
+
+ imagesize = (cam->sensor->pix_format.width *
+ cam->sensor->pix_format.height *
+ cam->sensor->pix_format.priv) / 8;
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ unsigned int len, status;
+ void *pos;
+ u8* b1, * b2, sof;
+ const u8 VOID_BYTES = 6;
+ size_t imglen;
+
+ len = urb->iso_frame_desc[i].actual_length;
+ status = urb->iso_frame_desc[i].status;
+ pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
+
+ if (status) {
+ DBG(3, "Error in isochronous frame");
+ (*f)->state = F_ERROR;
+ continue;
+ }
+
+ b1 = pos++;
+ b2 = pos++;
+ sof = ((*b1 & 0x3f) == 63);
+ imglen = ((*b1 & 0xc0) << 2) | *b2;
+
+ PDBGG("Isochrnous frame: length %u, #%u i, image length %zu",
+ len, i, imglen);
+
+ if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR)
+start_of_frame:
+ if (sof) {
+ (*f)->state = F_GRABBING;
+ (*f)->buf.bytesused = 0;
+ do_gettimeofday(&(*f)->buf.timestamp);
+ pos += 22;
+ DBG(3, "SOF detected: new video frame");
+ }
+
+ if ((*f)->state == F_GRABBING) {
+ if (sof && (*f)->buf.bytesused) {
+ if (cam->sensor->pix_format.pixelformat ==
+ V4L2_PIX_FMT_ET61X251)
+ goto end_of_frame;
+ else {
+ DBG(3, "Not expected SOF detected "
+ "after %lu bytes",
+ (unsigned long)(*f)->buf.bytesused);
+ (*f)->state = F_ERROR;
+ continue;
+ }
+ }
+
+ if ((*f)->buf.bytesused + imglen > imagesize) {
+ DBG(3, "Video frame size exceeded");
+ (*f)->state = F_ERROR;
+ continue;
+ }
+
+ pos += VOID_BYTES;
+
+ memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, imglen);
+ (*f)->buf.bytesused += imglen;
+
+ if ((*f)->buf.bytesused == imagesize) {
+ u32 b;
+end_of_frame:
+ b = (*f)->buf.bytesused;
+ (*f)->state = F_DONE;
+ (*f)->buf.sequence= ++cam->frame_count;
+ spin_lock(&cam->queue_lock);
+ list_move_tail(&(*f)->frame, &cam->outqueue);
+ if (!list_empty(&cam->inqueue))
+ (*f) = list_entry(cam->inqueue.next,
+ struct et61x251_frame_t,
+ frame);
+ else
+ (*f) = NULL;
+ spin_unlock(&cam->queue_lock);
+ DBG(3, "Video frame captured: : %lu bytes",
+ (unsigned long)(b));
+
+ if (!(*f))
+ goto resubmit_urb;
+
+ if (sof &&
+ cam->sensor->pix_format.pixelformat ==
+ V4L2_PIX_FMT_ET61X251)
+ goto start_of_frame;
+ }
+ }
+ }
+
+resubmit_urb:
+ urb->dev = cam->usbdev;
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0 && err != -EPERM) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "usb_submit_urb() failed");
+ }
+
+ wake_up_interruptible(&cam->wait_frame);
+}
+
+
+static int et61x251_start_transfer(struct et61x251_device* cam)
+{
+ struct usb_device *udev = cam->usbdev;
+ struct urb* urb;
+ const unsigned int wMaxPacketSize[] = {0, 256, 384, 512, 640, 768, 832,
+ 864, 896, 920, 956, 980, 1000,
+ 1022};
+ const unsigned int psz = wMaxPacketSize[ET61X251_ALTERNATE_SETTING];
+ s8 i, j;
+ int err = 0;
+
+ for (i = 0; i < ET61X251_URBS; i++) {
+ cam->transfer_buffer[i] = kzalloc(ET61X251_ISO_PACKETS * psz,
+ GFP_KERNEL);
+ if (!cam->transfer_buffer[i]) {
+ err = -ENOMEM;
+ DBG(1, "Not enough memory");
+ goto free_buffers;
+ }
+ }
+
+ for (i = 0; i < ET61X251_URBS; i++) {
+ urb = usb_alloc_urb(ET61X251_ISO_PACKETS, GFP_KERNEL);
+ cam->urb[i] = urb;
+ if (!urb) {
+ err = -ENOMEM;
+ DBG(1, "usb_alloc_urb() failed");
+ goto free_urbs;
+ }
+ urb->dev = udev;
+ urb->context = cam;
+ urb->pipe = usb_rcvisocpipe(udev, 1);
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->number_of_packets = ET61X251_ISO_PACKETS;
+ urb->complete = et61x251_urb_complete;
+ urb->transfer_buffer = cam->transfer_buffer[i];
+ urb->transfer_buffer_length = psz * ET61X251_ISO_PACKETS;
+ urb->interval = 1;
+ for (j = 0; j < ET61X251_ISO_PACKETS; j++) {
+ urb->iso_frame_desc[j].offset = psz * j;
+ urb->iso_frame_desc[j].length = psz;
+ }
+ }
+
+ err = et61x251_write_reg(cam, 0x01, 0x03);
+ err = et61x251_write_reg(cam, 0x00, 0x03);
+ err = et61x251_write_reg(cam, 0x08, 0x03);
+ if (err) {
+ err = -EIO;
+ DBG(1, "I/O hardware error");
+ goto free_urbs;
+ }
+
+ err = usb_set_interface(udev, 0, ET61X251_ALTERNATE_SETTING);
+ if (err) {
+ DBG(1, "usb_set_interface() failed");
+ goto free_urbs;
+ }
+
+ cam->frame_current = NULL;
+
+ for (i = 0; i < ET61X251_URBS; i++) {
+ err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
+ if (err) {
+ for (j = i-1; j >= 0; j--)
+ usb_kill_urb(cam->urb[j]);
+ DBG(1, "usb_submit_urb() failed, error %d", err);
+ goto free_urbs;
+ }
+ }
+
+ return 0;
+
+free_urbs:
+ for (i = 0; (i < ET61X251_URBS) && cam->urb[i]; i++)
+ usb_free_urb(cam->urb[i]);
+
+free_buffers:
+ for (i = 0; (i < ET61X251_URBS) && cam->transfer_buffer[i]; i++)
+ kfree(cam->transfer_buffer[i]);
+
+ return err;
+}
+
+
+static int et61x251_stop_transfer(struct et61x251_device* cam)
+{
+ struct usb_device *udev = cam->usbdev;
+ s8 i;
+ int err = 0;
+
+ if (cam->state & DEV_DISCONNECTED)
+ return 0;
+
+ for (i = ET61X251_URBS-1; i >= 0; i--) {
+ usb_kill_urb(cam->urb[i]);
+ usb_free_urb(cam->urb[i]);
+ kfree(cam->transfer_buffer[i]);
+ }
+
+ err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
+ if (err)
+ DBG(3, "usb_set_interface() failed");
+
+ return err;
+}
+
+
+static int et61x251_stream_interrupt(struct et61x251_device* cam)
+{
+ int err = 0;
+
+ cam->stream = STREAM_INTERRUPT;
+ err = wait_event_timeout(cam->wait_stream,
+ (cam->stream == STREAM_OFF) ||
+ (cam->state & DEV_DISCONNECTED),
+ ET61X251_URB_TIMEOUT);
+ if (cam->state & DEV_DISCONNECTED)
+ return -ENODEV;
+ else if (err) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "URB timeout reached. The camera is misconfigured. To "
+ "use it, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return err;
+ }
+
+ return 0;
+}
+
+/*****************************************************************************/
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static u8 et61x251_strtou8(const char* buff, size_t len, ssize_t* count)
+{
+ char str[5];
+ char* endp;
+ unsigned long val;
+
+ if (len < 4) {
+ strncpy(str, buff, len);
+ str[len+1] = '\0';
+ } else {
+ strncpy(str, buff, 4);
+ str[4] = '\0';
+ }
+
+ val = simple_strtoul(str, &endp, 0);
+
+ *count = 0;
+ if (val <= 0xff)
+ *count = (ssize_t)(endp - str);
+ if ((*count) && (len == *count+1) && (buff[*count] == '\n'))
+ *count += 1;
+
+ return (u8)val;
+}
+
+/*
+ NOTE 1: being inside one of the following methods implies that the v4l
+ device exists for sure (see kobjects and reference counters)
+ NOTE 2: buffers are PAGE_SIZE long
+*/
+
+static ssize_t et61x251_show_reg(struct class_device* cd, char* buf)
+{
+ struct et61x251_device* cam;
+ ssize_t count;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ count = sprintf(buf, "%u\n", cam->sysfs.reg);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t
+et61x251_store_reg(struct class_device* cd, const char* buf, size_t len)
+{
+ struct et61x251_device* cam;
+ u8 index;
+ ssize_t count;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ index = et61x251_strtou8(buf, len, &count);
+ if (index > 0x8e || !count) {
+ up(&et61x251_sysfs_lock);
+ return -EINVAL;
+ }
+
+ cam->sysfs.reg = index;
+
+ DBG(2, "Moved ET61X[12]51 register index to 0x%02X", cam->sysfs.reg);
+ DBG(3, "Written bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t et61x251_show_val(struct class_device* cd, char* buf)
+{
+ struct et61x251_device* cam;
+ ssize_t count;
+ int val;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ if ((val = et61x251_read_reg(cam, cam->sysfs.reg)) < 0) {
+ up(&et61x251_sysfs_lock);
+ return -EIO;
+ }
+
+ count = sprintf(buf, "%d\n", val);
+
+ DBG(3, "Read bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t
+et61x251_store_val(struct class_device* cd, const char* buf, size_t len)
+{
+ struct et61x251_device* cam;
+ u8 value;
+ ssize_t count;
+ int err;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ value = et61x251_strtou8(buf, len, &count);
+ if (!count) {
+ up(&et61x251_sysfs_lock);
+ return -EINVAL;
+ }
+
+ err = et61x251_write_reg(cam, value, cam->sysfs.reg);
+ if (err) {
+ up(&et61x251_sysfs_lock);
+ return -EIO;
+ }
+
+ DBG(2, "Written ET61X[12]51 reg. 0x%02X, val. 0x%02X",
+ cam->sysfs.reg, value);
+ DBG(3, "Written bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf)
+{
+ struct et61x251_device* cam;
+ ssize_t count;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg);
+
+ DBG(3, "Read bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t
+et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
+{
+ struct et61x251_device* cam;
+ u8 index;
+ ssize_t count;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ index = et61x251_strtou8(buf, len, &count);
+ if (!count) {
+ up(&et61x251_sysfs_lock);
+ return -EINVAL;
+ }
+
+ cam->sysfs.i2c_reg = index;
+
+ DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
+ DBG(3, "Written bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf)
+{
+ struct et61x251_device* cam;
+ ssize_t count;
+ int val;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ if (!(cam->sensor->sysfs_ops & ET61X251_I2C_READ)) {
+ up(&et61x251_sysfs_lock);
+ return -ENOSYS;
+ }
+
+ if ((val = et61x251_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) {
+ up(&et61x251_sysfs_lock);
+ return -EIO;
+ }
+
+ count = sprintf(buf, "%d\n", val);
+
+ DBG(3, "Read bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static ssize_t
+et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
+{
+ struct et61x251_device* cam;
+ u8 value;
+ ssize_t count;
+ int err;
+
+ if (down_interruptible(&et61x251_sysfs_lock))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(to_video_device(cd));
+ if (!cam) {
+ up(&et61x251_sysfs_lock);
+ return -ENODEV;
+ }
+
+ if (!(cam->sensor->sysfs_ops & ET61X251_I2C_READ)) {
+ up(&et61x251_sysfs_lock);
+ return -ENOSYS;
+ }
+
+ value = et61x251_strtou8(buf, len, &count);
+ if (!count) {
+ up(&et61x251_sysfs_lock);
+ return -EINVAL;
+ }
+
+ err = et61x251_i2c_write(cam, cam->sysfs.i2c_reg, value);
+ if (err) {
+ up(&et61x251_sysfs_lock);
+ return -EIO;
+ }
+
+ DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X",
+ cam->sysfs.i2c_reg, value);
+ DBG(3, "Written bytes: %zd", count);
+
+ up(&et61x251_sysfs_lock);
+
+ return count;
+}
+
+
+static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
+ et61x251_show_reg, et61x251_store_reg);
+static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
+ et61x251_show_val, et61x251_store_val);
+static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
+ et61x251_show_i2c_reg, et61x251_store_i2c_reg);
+static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
+ et61x251_show_i2c_val, et61x251_store_i2c_val);
+
+
+static void et61x251_create_sysfs(struct et61x251_device* cam)
+{
+ struct video_device *v4ldev = cam->v4ldev;
+
+ video_device_create_file(v4ldev, &class_device_attr_reg);
+ video_device_create_file(v4ldev, &class_device_attr_val);
+ if (cam->sensor && cam->sensor->sysfs_ops) {
+ video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
+ video_device_create_file(v4ldev, &class_device_attr_i2c_val);
+ }
+}
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
+
+/*****************************************************************************/
+
+static int
+et61x251_set_pix_format(struct et61x251_device* cam,
+ struct v4l2_pix_format* pix)
+{
+ int r, err = 0;
+
+ if ((r = et61x251_read_reg(cam, 0x12)) < 0)
+ err += r;
+ if (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
+ err += et61x251_write_reg(cam, r & 0xfd, 0x12);
+ else
+ err += et61x251_write_reg(cam, r | 0x02, 0x12);
+
+ return err ? -EIO : 0;
+}
+
+
+static int
+et61x251_set_compression(struct et61x251_device* cam,
+ struct v4l2_jpegcompression* compression)
+{
+ int r, err = 0;
+
+ if ((r = et61x251_read_reg(cam, 0x12)) < 0)
+ err += r;
+ if (compression->quality == 0)
+ err += et61x251_write_reg(cam, r & 0xfb, 0x12);
+ else
+ err += et61x251_write_reg(cam, r | 0x04, 0x12);
+
+ return err ? -EIO : 0;
+}
+
+
+static int et61x251_set_scale(struct et61x251_device* cam, u8 scale)
+{
+ int r = 0, err = 0;
+
+ r = et61x251_read_reg(cam, 0x12);
+ if (r < 0)
+ err += r;
+
+ if (scale == 1)
+ err += et61x251_write_reg(cam, r & ~0x01, 0x12);
+ else if (scale == 2)
+ err += et61x251_write_reg(cam, r | 0x01, 0x12);
+
+ if (err)
+ return -EIO;
+
+ PDBGG("Scaling factor: %u", scale);
+
+ return 0;
+}
+
+
+static int
+et61x251_set_crop(struct et61x251_device* cam, struct v4l2_rect* rect)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ u16 fmw_sx = (u16)(rect->left - s->cropcap.bounds.left +
+ s->active_pixel.left),
+ fmw_sy = (u16)(rect->top - s->cropcap.bounds.top +
+ s->active_pixel.top),
+ fmw_length = (u16)(rect->width),
+ fmw_height = (u16)(rect->height);
+ int err = 0;
+
+ err += et61x251_write_reg(cam, fmw_sx & 0xff, 0x69);
+ err += et61x251_write_reg(cam, fmw_sy & 0xff, 0x6a);
+ err += et61x251_write_reg(cam, fmw_length & 0xff, 0x6b);
+ err += et61x251_write_reg(cam, fmw_height & 0xff, 0x6c);
+ err += et61x251_write_reg(cam, (fmw_sx >> 8) | ((fmw_sy & 0x300) >> 6)
+ | ((fmw_length & 0x300) >> 4)
+ | ((fmw_height & 0x300) >> 2), 0x6d);
+ if (err)
+ return -EIO;
+
+ PDBGG("fmw_sx, fmw_sy, fmw_length, fmw_height: %u %u %u %u",
+ fmw_sx, fmw_sy, fmw_length, fmw_height);
+
+ return 0;
+}
+
+
+static int et61x251_init(struct et61x251_device* cam)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ struct v4l2_queryctrl *qctrl;
+ struct v4l2_rect* rect;
+ u8 i = 0;
+ int err = 0;
+
+ if (!(cam->state & DEV_INITIALIZED)) {
+ init_waitqueue_head(&cam->open);
+ qctrl = s->qctrl;
+ rect = &(s->cropcap.defrect);
+ cam->compression.quality = ET61X251_COMPRESSION_QUALITY;
+ } else { /* use current values */
+ qctrl = s->_qctrl;
+ rect = &(s->_rect);
+ }
+
+ err += et61x251_set_scale(cam, rect->width / s->pix_format.width);
+ err += et61x251_set_crop(cam, rect);
+ if (err)
+ return err;
+
+ if (s->init) {
+ err = s->init(cam);
+ if (err) {
+ DBG(3, "Sensor initialization failed");
+ return err;
+ }
+ }
+
+ err += et61x251_set_compression(cam, &cam->compression);
+ err += et61x251_set_pix_format(cam, &s->pix_format);
+ if (s->set_pix_format)
+ err += s->set_pix_format(cam, &s->pix_format);
+ if (err)
+ return err;
+
+ if (s->pix_format.pixelformat == V4L2_PIX_FMT_ET61X251)
+ DBG(3, "Compressed video format is active, quality %d",
+ cam->compression.quality);
+ else
+ DBG(3, "Uncompressed video format is active");
+
+ if (s->set_crop)
+ if ((err = s->set_crop(cam, rect))) {
+ DBG(3, "set_crop() failed");
+ return err;
+ }
+
+ if (s->set_ctrl) {
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (s->qctrl[i].id != 0 &&
+ !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
+ ctrl.id = s->qctrl[i].id;
+ ctrl.value = qctrl[i].default_value;
+ err = s->set_ctrl(cam, &ctrl);
+ if (err) {
+ DBG(3, "Set %s control failed",
+ s->qctrl[i].name);
+ return err;
+ }
+ DBG(3, "Image sensor supports '%s' control",
+ s->qctrl[i].name);
+ }
+ }
+
+ if (!(cam->state & DEV_INITIALIZED)) {
+ init_MUTEX(&cam->fileop_sem);
+ spin_lock_init(&cam->queue_lock);
+ init_waitqueue_head(&cam->wait_frame);
+ init_waitqueue_head(&cam->wait_stream);
+ cam->nreadbuffers = 2;
+ memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
+ memcpy(&(s->_rect), &(s->cropcap.defrect),
+ sizeof(struct v4l2_rect));
+ cam->state |= DEV_INITIALIZED;
+ }
+
+ DBG(2, "Initialization succeeded");
+ return 0;
+}
+
+
+static void et61x251_release_resources(struct et61x251_device* cam)
+{
+ down(&et61x251_sysfs_lock);
+
+ DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+ video_set_drvdata(cam->v4ldev, NULL);
+ video_unregister_device(cam->v4ldev);
+
+ up(&et61x251_sysfs_lock);
+
+ kfree(cam->control_buffer);
+}
+
+/*****************************************************************************/
+
+static int et61x251_open(struct inode* inode, struct file* filp)
+{
+ struct et61x251_device* cam;
+ int err = 0;
+
+ /*
+ This is the only safe way to prevent race conditions with
+ disconnect
+ */
+ if (!down_read_trylock(&et61x251_disconnect))
+ return -ERESTARTSYS;
+
+ cam = video_get_drvdata(video_devdata(filp));
+
+ if (down_interruptible(&cam->dev_sem)) {
+ up_read(&et61x251_disconnect);
+ return -ERESTARTSYS;
+ }
+
+ if (cam->users) {
+ DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (filp->f_flags & O_NDELAY)) {
+ err = -EWOULDBLOCK;
+ goto out;
+ }
+ up(&cam->dev_sem);
+ err = wait_event_interruptible_exclusive(cam->open,
+ cam->state & DEV_DISCONNECTED
+ || !cam->users);
+ if (err) {
+ up_read(&et61x251_disconnect);
+ return err;
+ }
+ if (cam->state & DEV_DISCONNECTED) {
+ up_read(&et61x251_disconnect);
+ return -ENODEV;
+ }
+ down(&cam->dev_sem);
+ }
+
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ err = et61x251_init(cam);
+ if (err) {
+ DBG(1, "Initialization failed again. "
+ "I will retry on next open().");
+ goto out;
+ }
+ cam->state &= ~DEV_MISCONFIGURED;
+ }
+
+ if ((err = et61x251_start_transfer(cam)))
+ goto out;
+
+ filp->private_data = cam;
+ cam->users++;
+ cam->io = IO_NONE;
+ cam->stream = STREAM_OFF;
+ cam->nbuffers = 0;
+ cam->frame_count = 0;
+ et61x251_empty_framequeues(cam);
+
+ DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+
+out:
+ up(&cam->dev_sem);
+ up_read(&et61x251_disconnect);
+ return err;
+}
+
+
+static int et61x251_release(struct inode* inode, struct file* filp)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+
+ down(&cam->dev_sem); /* prevent disconnect() to be called */
+
+ et61x251_stop_transfer(cam);
+
+ et61x251_release_buffers(cam);
+
+ if (cam->state & DEV_DISCONNECTED) {
+ et61x251_release_resources(cam);
+ up(&cam->dev_sem);
+ kfree(cam);
+ return 0;
+ }
+
+ cam->users--;
+ wake_up_interruptible_nr(&cam->open, 1);
+
+ DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+
+ up(&cam->dev_sem);
+
+ return 0;
+}
+
+
+static ssize_t
+et61x251_read(struct file* filp, char __user * buf,
+ size_t count, loff_t* f_pos)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+ struct et61x251_frame_t* f, * i;
+ unsigned long lock_flags;
+ int err = 0;
+
+ if (down_interruptible(&cam->fileop_sem))
+ return -ERESTARTSYS;
+
+ if (cam->state & DEV_DISCONNECTED) {
+ DBG(1, "Device not present");
+ up(&cam->fileop_sem);
+ return -ENODEV;
+ }
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
+ up(&cam->fileop_sem);
+ return -EIO;
+ }
+
+ if (cam->io == IO_MMAP) {
+ DBG(3, "Close and open the device again to choose the read "
+ "method");
+ up(&cam->fileop_sem);
+ return -EINVAL;
+ }
+
+ if (cam->io == IO_NONE) {
+ if (!et61x251_request_buffers(cam, cam->nreadbuffers,
+ IO_READ)) {
+ DBG(1, "read() failed, not enough memory");
+ up(&cam->fileop_sem);
+ return -ENOMEM;
+ }
+ cam->io = IO_READ;
+ cam->stream = STREAM_ON;
+ }
+
+ if (list_empty(&cam->inqueue)) {
+ if (!list_empty(&cam->outqueue))
+ et61x251_empty_framequeues(cam);
+ et61x251_queue_unusedframes(cam);
+ }
+
+ if (!count) {
+ up(&cam->fileop_sem);
+ return 0;
+ }
+
+ if (list_empty(&cam->outqueue)) {
+ if (filp->f_flags & O_NONBLOCK) {
+ up(&cam->fileop_sem);
+ return -EAGAIN;
+ }
+ err = wait_event_interruptible
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED) );
+ if (err) {
+ up(&cam->fileop_sem);
+ return err;
+ }
+ if (cam->state & DEV_DISCONNECTED) {
+ up(&cam->fileop_sem);
+ return -ENODEV;
+ }
+ if (cam->state & DEV_MISCONFIGURED) {
+ up(&cam->fileop_sem);
+ return -EIO;
+ }
+ }
+
+ f = list_entry(cam->outqueue.prev, struct et61x251_frame_t, frame);
+
+ if (count > f->buf.bytesused)
+ count = f->buf.bytesused;
+
+ if (copy_to_user(buf, f->bufmem, count)) {
+ err = -EFAULT;
+ goto exit;
+ }
+ *f_pos += count;
+
+exit:
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_for_each_entry(i, &cam->outqueue, frame)
+ i->state = F_UNUSED;
+ INIT_LIST_HEAD(&cam->outqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ et61x251_queue_unusedframes(cam);
+
+ PDBGG("Frame #%lu, bytes read: %zu",
+ (unsigned long)f->buf.index, count);
+
+ up(&cam->fileop_sem);
+
+ return err ? err : count;
+}
+
+
+static unsigned int et61x251_poll(struct file *filp, poll_table *wait)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+ struct et61x251_frame_t* f;
+ unsigned long lock_flags;
+ unsigned int mask = 0;
+
+ if (down_interruptible(&cam->fileop_sem))
+ return POLLERR;
+
+ if (cam->state & DEV_DISCONNECTED) {
+ DBG(1, "Device not present");
+ goto error;
+ }
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
+ goto error;
+ }
+
+ if (cam->io == IO_NONE) {
+ if (!et61x251_request_buffers(cam, cam->nreadbuffers,
+ IO_READ)) {
+ DBG(1, "poll() failed, not enough memory");
+ goto error;
+ }
+ cam->io = IO_READ;
+ cam->stream = STREAM_ON;
+ }
+
+ if (cam->io == IO_READ) {
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_for_each_entry(f, &cam->outqueue, frame)
+ f->state = F_UNUSED;
+ INIT_LIST_HEAD(&cam->outqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+ et61x251_queue_unusedframes(cam);
+ }
+
+ poll_wait(filp, &cam->wait_frame, wait);
+
+ if (!list_empty(&cam->outqueue))
+ mask |= POLLIN | POLLRDNORM;
+
+ up(&cam->fileop_sem);
+
+ return mask;
+
+error:
+ up(&cam->fileop_sem);
+ return POLLERR;
+}
+
+
+static void et61x251_vm_open(struct vm_area_struct* vma)
+{
+ struct et61x251_frame_t* f = vma->vm_private_data;
+ f->vma_use_count++;
+}
+
+
+static void et61x251_vm_close(struct vm_area_struct* vma)
+{
+ /* NOTE: buffers are not freed here */
+ struct et61x251_frame_t* f = vma->vm_private_data;
+ f->vma_use_count--;
+}
+
+
+static struct vm_operations_struct et61x251_vm_ops = {
+ .open = et61x251_vm_open,
+ .close = et61x251_vm_close,
+};
+
+
+static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+ unsigned long size = vma->vm_end - vma->vm_start,
+ start = vma->vm_start;
+ void *pos;
+ u32 i;
+
+ if (down_interruptible(&cam->fileop_sem))
+ return -ERESTARTSYS;
+
+ if (cam->state & DEV_DISCONNECTED) {
+ DBG(1, "Device not present");
+ up(&cam->fileop_sem);
+ return -ENODEV;
+ }
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
+ up(&cam->fileop_sem);
+ return -EIO;
+ }
+
+ if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
+ size != PAGE_ALIGN(cam->frame[0].buf.length)) {
+ up(&cam->fileop_sem);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < cam->nbuffers; i++) {
+ if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
+ break;
+ }
+ if (i == cam->nbuffers) {
+ up(&cam->fileop_sem);
+ return -EINVAL;
+ }
+
+ vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_RESERVED;
+
+ pos = cam->frame[i].bufmem;
+ while (size > 0) { /* size is page-aligned */
+ if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
+ up(&cam->fileop_sem);
+ return -EAGAIN;
+ }
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ vma->vm_ops = &et61x251_vm_ops;
+ vma->vm_private_data = &cam->frame[i];
+
+ et61x251_vm_open(vma);
+
+ up(&cam->fileop_sem);
+
+ return 0;
+}
+
+/*****************************************************************************/
+
+static int
+et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_capability cap = {
+ .driver = "et61x251",
+ .version = ET61X251_MODULE_VERSION_CODE,
+ .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING,
+ };
+
+ strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+ if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+ strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+ sizeof(cap.bus_info));
+
+ if (copy_to_user(arg, &cap, sizeof(cap)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_input i;
+
+ if (copy_from_user(&i, arg, sizeof(i)))
+ return -EFAULT;
+
+ if (i.index)
+ return -EINVAL;
+
+ memset(&i, 0, sizeof(i));
+ strcpy(i.name, "Camera");
+
+ if (copy_to_user(arg, &i, sizeof(i)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_gs_input(struct et61x251_device* cam, void __user * arg)
+{
+ int index;
+
+ if (copy_from_user(&index, arg, sizeof(index)))
+ return -EFAULT;
+
+ if (index != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_query_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_queryctrl qc;
+ u8 i;
+
+ if (copy_from_user(&qc, arg, sizeof(qc)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (qc.id && qc.id == s->qctrl[i].id) {
+ memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+ if (copy_to_user(arg, &qc, sizeof(qc)))
+ return -EFAULT;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
+static int
+et61x251_vidioc_g_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ int err = 0;
+ u8 i;
+
+ if (!s->get_ctrl && !s->set_ctrl)
+ return -EINVAL;
+
+ if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+ return -EFAULT;
+
+ if (!s->get_ctrl) {
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (ctrl.id == s->qctrl[i].id) {
+ ctrl.value = s->_qctrl[i].default_value;
+ goto exit;
+ }
+ return -EINVAL;
+ } else
+ err = s->get_ctrl(cam, &ctrl);
+
+exit:
+ if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+ return -EFAULT;
+
+ return err;
+}
+
+
+static int
+et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ u8 i;
+ int err = 0;
+
+ if (!s->set_ctrl)
+ return -EINVAL;
+
+ if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (ctrl.id == s->qctrl[i].id) {
+ if (ctrl.value < s->qctrl[i].minimum ||
+ ctrl.value > s->qctrl[i].maximum)
+ return -ERANGE;
+ ctrl.value -= ctrl.value % s->qctrl[i].step;
+ break;
+ }
+
+ if ((err = s->set_ctrl(cam, &ctrl)))
+ return err;
+
+ s->_qctrl[i].default_value = ctrl.value;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_cropcap(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
+
+ cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ cc->pixelaspect.numerator = 1;
+ cc->pixelaspect.denominator = 1;
+
+ if (copy_to_user(arg, cc, sizeof(*cc)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_g_crop(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_crop crop = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ };
+
+ memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+ if (copy_to_user(arg, &crop, sizeof(crop)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_crop crop;
+ struct v4l2_rect* rect;
+ struct v4l2_rect* bounds = &(s->cropcap.bounds);
+ struct v4l2_pix_format* pix_format = &(s->pix_format);
+ u8 scale;
+ const enum et61x251_stream_state stream = cam->stream;
+ const u32 nbuffers = cam->nbuffers;
+ u32 i;
+ int err = 0;
+
+ if (copy_from_user(&crop, arg, sizeof(crop)))
+ return -EFAULT;
+
+ rect = &(crop.c);
+
+ if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (cam->module_param.force_munmap)
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_S_CROP failed. "
+ "Unmap the buffers first.");
+ return -EINVAL;
+ }
+
+ /* Preserve R,G or B origin */
+ rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
+ rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
+
+ if (rect->width < 4)
+ rect->width = 4;
+ if (rect->height < 4)
+ rect->height = 4;
+ if (rect->width > bounds->width)
+ rect->width = bounds->width;
+ if (rect->height > bounds->height)
+ rect->height = bounds->height;
+ if (rect->left < bounds->left)
+ rect->left = bounds->left;
+ if (rect->top < bounds->top)
+ rect->top = bounds->top;
+ if (rect->left + rect->width > bounds->left + bounds->width)
+ rect->left = bounds->left+bounds->width - rect->width;
+ if (rect->top + rect->height > bounds->top + bounds->height)
+ rect->top = bounds->top+bounds->height - rect->height;
+
+ rect->width &= ~3L;
+ rect->height &= ~3L;
+
+ if (ET61X251_PRESERVE_IMGSCALE) {
+ /* Calculate the actual scaling factor */
+ u32 a, b;
+ a = rect->width * rect->height;
+ b = pix_format->width * pix_format->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+ } else
+ scale = 1;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ if (copy_to_user(arg, &crop, sizeof(crop))) {
+ cam->stream = stream;
+ return -EFAULT;
+ }
+
+ if (cam->module_param.force_munmap || cam->io == IO_READ)
+ et61x251_release_buffers(cam);
+
+ err = et61x251_set_crop(cam, rect);
+ if (s->set_crop)
+ err += s->set_crop(cam, rect);
+ err += et61x251_set_scale(cam, scale);
+
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ s->pix_format.width = rect->width/scale;
+ s->pix_format.height = rect->height/scale;
+ memcpy(&(s->_rect), rect, sizeof(*rect));
+
+ if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+ nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -ENOMEM;
+ }
+
+ if (cam->io == IO_READ)
+ et61x251_empty_framequeues(cam);
+ else if (cam->module_param.force_munmap)
+ et61x251_requeue_outqueue(cam);
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_enum_fmt(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_fmtdesc fmtd;
+
+ if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+ return -EFAULT;
+
+ if (fmtd.index == 0) {
+ strcpy(fmtd.description, "bayer rgb");
+ fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
+ } else if (fmtd.index == 1) {
+ strcpy(fmtd.description, "compressed");
+ fmtd.pixelformat = V4L2_PIX_FMT_ET61X251;
+ fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+ } else
+ return -EINVAL;
+
+ fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+ if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_g_fmt(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_format format;
+ struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
+
+ if (copy_from_user(&format, arg, sizeof(format)))
+ return -EFAULT;
+
+ if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_ET61X251)
+ ? 0 : (pfmt->width * pfmt->priv) / 8;
+ pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+ pfmt->field = V4L2_FIELD_NONE;
+ memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+ if (copy_to_user(arg, &format, sizeof(format)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
+ void __user * arg)
+{
+ struct et61x251_sensor* s = cam->sensor;
+ struct v4l2_format format;
+ struct v4l2_pix_format* pix;
+ struct v4l2_pix_format* pfmt = &(s->pix_format);
+ struct v4l2_rect* bounds = &(s->cropcap.bounds);
+ struct v4l2_rect rect;
+ u8 scale;
+ const enum et61x251_stream_state stream = cam->stream;
+ const u32 nbuffers = cam->nbuffers;
+ u32 i;
+ int err = 0;
+
+ if (copy_from_user(&format, arg, sizeof(format)))
+ return -EFAULT;
+
+ pix = &(format.fmt.pix);
+
+ if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memcpy(&rect, &(s->_rect), sizeof(rect));
+
+ { /* calculate the actual scaling factor */
+ u32 a, b;
+ a = rect.width * rect.height;
+ b = pix->width * pix->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+ }
+
+ rect.width = scale * pix->width;
+ rect.height = scale * pix->height;
+
+ if (rect.width < 4)
+ rect.width = 4;
+ if (rect.height < 4)
+ rect.height = 4;
+ if (rect.width > bounds->left + bounds->width - rect.left)
+ rect.width = bounds->left + bounds->width - rect.left;
+ if (rect.height > bounds->top + bounds->height - rect.top)
+ rect.height = bounds->top + bounds->height - rect.top;
+
+ rect.width &= ~3L;
+ rect.height &= ~3L;
+
+ { /* adjust the scaling factor */
+ u32 a, b;
+ a = rect.width * rect.height;
+ b = pix->width * pix->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+ }
+
+ pix->width = rect.width / scale;
+ pix->height = rect.height / scale;
+
+ if (pix->pixelformat != V4L2_PIX_FMT_ET61X251 &&
+ pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+ pix->pixelformat = pfmt->pixelformat;
+ pix->priv = pfmt->priv; /* bpp */
+ pix->colorspace = pfmt->colorspace;
+ pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
+ ? 0 : (pix->width * pix->priv) / 8;
+ pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+ pix->field = V4L2_FIELD_NONE;
+
+ if (cmd == VIDIOC_TRY_FMT) {
+ if (copy_to_user(arg, &format, sizeof(format)))
+ return -EFAULT;
+ return 0;
+ }
+
+ if (cam->module_param.force_munmap)
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_S_FMT failed. "
+ "Unmap the buffers first.");
+ return -EINVAL;
+ }
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ if (copy_to_user(arg, &format, sizeof(format))) {
+ cam->stream = stream;
+ return -EFAULT;
+ }
+
+ if (cam->module_param.force_munmap || cam->io == IO_READ)
+ et61x251_release_buffers(cam);
+
+ err += et61x251_set_pix_format(cam, pix);
+ err += et61x251_set_crop(cam, &rect);
+ if (s->set_pix_format)
+ err += s->set_pix_format(cam, pix);
+ if (s->set_crop)
+ err += s->set_crop(cam, &rect);
+ err += et61x251_set_scale(cam, scale);
+
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ memcpy(pfmt, pix, sizeof(*pix));
+ memcpy(&(s->_rect), &rect, sizeof(rect));
+
+ if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+ nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -ENOMEM;
+ }
+
+ if (cam->io == IO_READ)
+ et61x251_empty_framequeues(cam);
+ else if (cam->module_param.force_munmap)
+ et61x251_requeue_outqueue(cam);
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_g_jpegcomp(struct et61x251_device* cam, void __user * arg)
+{
+ if (copy_to_user(arg, &cam->compression,
+ sizeof(cam->compression)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_jpegcompression jc;
+ const enum et61x251_stream_state stream = cam->stream;
+ int err = 0;
+
+ if (copy_from_user(&jc, arg, sizeof(jc)))
+ return -EFAULT;
+
+ if (jc.quality != 0 && jc.quality != 1)
+ return -EINVAL;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ err += et61x251_set_compression(cam, &jc);
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+ "problems. To use the camera, close and open "
+ "/dev/video%d again.", cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ cam->compression.quality = jc.quality;
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_reqbufs(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_requestbuffers rb;
+ u32 i;
+ int err;
+
+ if (copy_from_user(&rb, arg, sizeof(rb)))
+ return -EFAULT;
+
+ if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ rb.memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+
+ if (cam->io == IO_READ) {
+ DBG(3, "Close and open the device again to choose the mmap "
+ "I/O method");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_REQBUFS failed. "
+ "Previous buffers are still mapped.");
+ return -EINVAL;
+ }
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ et61x251_empty_framequeues(cam);
+
+ et61x251_release_buffers(cam);
+ if (rb.count)
+ rb.count = et61x251_request_buffers(cam, rb.count, IO_MMAP);
+
+ if (copy_to_user(arg, &rb, sizeof(rb))) {
+ et61x251_release_buffers(cam);
+ cam->io = IO_NONE;
+ return -EFAULT;
+ }
+
+ cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_querybuf(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_buffer b;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ b.index >= cam->nbuffers || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+ if (cam->frame[b.index].vma_use_count)
+ b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+ if (cam->frame[b.index].state == F_DONE)
+ b.flags |= V4L2_BUF_FLAG_DONE;
+ else if (cam->frame[b.index].state != F_UNUSED)
+ b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+ if (copy_to_user(arg, &b, sizeof(b)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_qbuf(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_buffer b;
+ unsigned long lock_flags;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ b.index >= cam->nbuffers || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (cam->frame[b.index].state != F_UNUSED)
+ return -EINVAL;
+
+ cam->frame[b.index].state = F_QUEUED;
+
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp,
+ void __user * arg)
+{
+ struct v4l2_buffer b;
+ struct et61x251_frame_t *f;
+ unsigned long lock_flags;
+ int err = 0;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
+ return -EINVAL;
+
+ if (list_empty(&cam->outqueue)) {
+ if (cam->stream == STREAM_OFF)
+ return -EINVAL;
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ err = wait_event_interruptible
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED) );
+ if (err)
+ return err;
+ if (cam->state & DEV_DISCONNECTED)
+ return -ENODEV;
+ if (cam->state & DEV_MISCONFIGURED)
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ f = list_entry(cam->outqueue.next, struct et61x251_frame_t, frame);
+ list_del(cam->outqueue.next);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ f->state = F_UNUSED;
+
+ memcpy(&b, &f->buf, sizeof(b));
+ if (f->vma_use_count)
+ b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+ if (copy_to_user(arg, &b, sizeof(b)))
+ return -EFAULT;
+
+ PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_streamon(struct et61x251_device* cam, void __user * arg)
+{
+ int type;
+
+ if (copy_from_user(&type, arg, sizeof(type)))
+ return -EFAULT;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (list_empty(&cam->inqueue))
+ return -EINVAL;
+
+ cam->stream = STREAM_ON;
+
+ DBG(3, "Stream on");
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_streamoff(struct et61x251_device* cam, void __user * arg)
+{
+ int type, err;
+
+ if (copy_from_user(&type, arg, sizeof(type)))
+ return -EFAULT;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = et61x251_stream_interrupt(cam)))
+ return err;
+
+ et61x251_empty_framequeues(cam);
+
+ DBG(3, "Stream off");
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_g_parm(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_streamparm sp;
+
+ if (copy_from_user(&sp, arg, sizeof(sp)))
+ return -EFAULT;
+
+ if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ sp.parm.capture.extendedmode = 0;
+ sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+ if (copy_to_user(arg, &sp, sizeof(sp)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+et61x251_vidioc_s_parm(struct et61x251_device* cam, void __user * arg)
+{
+ struct v4l2_streamparm sp;
+
+ if (copy_from_user(&sp, arg, sizeof(sp)))
+ return -EFAULT;
+
+ if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ sp.parm.capture.extendedmode = 0;
+
+ if (sp.parm.capture.readbuffers == 0)
+ sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+ if (sp.parm.capture.readbuffers > ET61X251_MAX_FRAMES)
+ sp.parm.capture.readbuffers = ET61X251_MAX_FRAMES;
+
+ if (copy_to_user(arg, &sp, sizeof(sp)))
+ return -EFAULT;
+
+ cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+ return 0;
+}
+
+
+static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp,
+ unsigned int cmd, void __user * arg)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+
+ switch (cmd) {
+
+ case VIDIOC_QUERYCAP:
+ return et61x251_vidioc_querycap(cam, arg);
+
+ case VIDIOC_ENUMINPUT:
+ return et61x251_vidioc_enuminput(cam, arg);
+
+ case VIDIOC_G_INPUT:
+ case VIDIOC_S_INPUT:
+ return et61x251_vidioc_gs_input(cam, arg);
+
+ case VIDIOC_QUERYCTRL:
+ return et61x251_vidioc_query_ctrl(cam, arg);
+
+ case VIDIOC_G_CTRL:
+ return et61x251_vidioc_g_ctrl(cam, arg);
+
+ case VIDIOC_S_CTRL_OLD:
+ case VIDIOC_S_CTRL:
+ return et61x251_vidioc_s_ctrl(cam, arg);
+
+ case VIDIOC_CROPCAP_OLD:
+ case VIDIOC_CROPCAP:
+ return et61x251_vidioc_cropcap(cam, arg);
+
+ case VIDIOC_G_CROP:
+ return et61x251_vidioc_g_crop(cam, arg);
+
+ case VIDIOC_S_CROP:
+ return et61x251_vidioc_s_crop(cam, arg);
+
+ case VIDIOC_ENUM_FMT:
+ return et61x251_vidioc_enum_fmt(cam, arg);
+
+ case VIDIOC_G_FMT:
+ return et61x251_vidioc_g_fmt(cam, arg);
+
+ case VIDIOC_TRY_FMT:
+ case VIDIOC_S_FMT:
+ return et61x251_vidioc_try_s_fmt(cam, cmd, arg);
+
+ case VIDIOC_G_JPEGCOMP:
+ return et61x251_vidioc_g_jpegcomp(cam, arg);
+
+ case VIDIOC_S_JPEGCOMP:
+ return et61x251_vidioc_s_jpegcomp(cam, arg);
+
+ case VIDIOC_REQBUFS:
+ return et61x251_vidioc_reqbufs(cam, arg);
+
+ case VIDIOC_QUERYBUF:
+ return et61x251_vidioc_querybuf(cam, arg);
+
+ case VIDIOC_QBUF:
+ return et61x251_vidioc_qbuf(cam, arg);
+
+ case VIDIOC_DQBUF:
+ return et61x251_vidioc_dqbuf(cam, filp, arg);
+
+ case VIDIOC_STREAMON:
+ return et61x251_vidioc_streamon(cam, arg);
+
+ case VIDIOC_STREAMOFF:
+ return et61x251_vidioc_streamoff(cam, arg);
+
+ case VIDIOC_G_PARM:
+ return et61x251_vidioc_g_parm(cam, arg);
+
+ case VIDIOC_S_PARM_OLD:
+ case VIDIOC_S_PARM:
+ return et61x251_vidioc_s_parm(cam, arg);
+
+ case VIDIOC_G_STD:
+ case VIDIOC_S_STD:
+ case VIDIOC_QUERYSTD:
+ case VIDIOC_ENUMSTD:
+ case VIDIOC_QUERYMENU:
+ return -EINVAL;
+
+ default:
+ return -EINVAL;
+
+ }
+}
+
+
+static int et61x251_ioctl(struct inode* inode, struct file* filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+ int err = 0;
+
+ if (down_interruptible(&cam->fileop_sem))
+ return -ERESTARTSYS;
+
+ if (cam->state & DEV_DISCONNECTED) {
+ DBG(1, "Device not present");
+ up(&cam->fileop_sem);
+ return -ENODEV;
+ }
+
+ if (cam->state & DEV_MISCONFIGURED) {
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
+ up(&cam->fileop_sem);
+ return -EIO;
+ }
+
+ V4LDBG(3, "et61x251", cmd);
+
+ err = et61x251_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
+
+ up(&cam->fileop_sem);
+
+ return err;
+}
+
+
+static struct file_operations et61x251_fops = {
+ .owner = THIS_MODULE,
+ .open = et61x251_open,
+ .release = et61x251_release,
+ .ioctl = et61x251_ioctl,
+ .read = et61x251_read,
+ .poll = et61x251_poll,
+ .mmap = et61x251_mmap,
+ .llseek = no_llseek,
+};
+
+/*****************************************************************************/
+
+/* It exists a single interface only. We do not need to validate anything. */
+static int
+et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct et61x251_device* cam;
+ static unsigned int dev_nr = 0;
+ unsigned int i;
+ int err = 0;
+
+ if (!(cam = kzalloc(sizeof(struct et61x251_device), GFP_KERNEL)))
+ return -ENOMEM;
+
+ cam->usbdev = udev;
+
+ if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
+ DBG(1, "kmalloc() failed");
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ if (!(cam->v4ldev = video_device_alloc())) {
+ DBG(1, "video_device_alloc() failed");
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ init_MUTEX(&cam->dev_sem);
+
+ DBG(2, "ET61X[12]51 PC Camera Controller detected "
+ "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct);
+
+ for (i = 0; et61x251_sensor_table[i]; i++) {
+ err = et61x251_sensor_table[i](cam);
+ if (!err)
+ break;
+ }
+
+ if (!err && cam->sensor)
+ DBG(2, "%s image sensor detected", cam->sensor->name);
+ else {
+ DBG(1, "No supported image sensor detected");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ if (et61x251_init(cam)) {
+ DBG(1, "Initialization failed. I will retry on open().");
+ cam->state |= DEV_MISCONFIGURED;
+ }
+
+ strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera");
+ cam->v4ldev->owner = THIS_MODULE;
+ cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
+ cam->v4ldev->hardware = 0;
+ cam->v4ldev->fops = &et61x251_fops;
+ cam->v4ldev->minor = video_nr[dev_nr];
+ cam->v4ldev->release = video_device_release;
+ video_set_drvdata(cam->v4ldev, cam);
+
+ down(&cam->dev_sem);
+
+ err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
+ video_nr[dev_nr]);
+ if (err) {
+ DBG(1, "V4L2 device registration failed");
+ if (err == -ENFILE && video_nr[dev_nr] == -1)
+ DBG(1, "Free /dev/videoX node not found");
+ video_nr[dev_nr] = -1;
+ dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
+ up(&cam->dev_sem);
+ goto fail;
+ }
+
+ DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+
+ cam->module_param.force_munmap = force_munmap[dev_nr];
+
+ dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ et61x251_create_sysfs(cam);
+ DBG(2, "Optional device control through 'sysfs' interface ready");
+#endif
+
+ usb_set_intfdata(intf, cam);
+
+ up(&cam->dev_sem);
+
+ return 0;
+
+fail:
+ if (cam) {
+ kfree(cam->control_buffer);
+ if (cam->v4ldev)
+ video_device_release(cam->v4ldev);
+ kfree(cam);
+ }
+ return err;
+}
+
+
+static void et61x251_usb_disconnect(struct usb_interface* intf)
+{
+ struct et61x251_device* cam = usb_get_intfdata(intf);
+
+ if (!cam)
+ return;
+
+ down_write(&et61x251_disconnect);
+
+ down(&cam->dev_sem);
+
+ DBG(2, "Disconnecting %s...", cam->v4ldev->name);
+
+ wake_up_interruptible_all(&cam->open);
+
+ if (cam->users) {
+ DBG(2, "Device /dev/video%d is open! Deregistration and "
+ "memory deallocation are deferred on close.",
+ cam->v4ldev->minor);
+ cam->state |= DEV_MISCONFIGURED;
+ et61x251_stop_transfer(cam);
+ cam->state |= DEV_DISCONNECTED;
+ wake_up_interruptible(&cam->wait_frame);
+ wake_up_interruptible(&cam->wait_stream);
+ } else {
+ cam->state |= DEV_DISCONNECTED;
+ et61x251_release_resources(cam);
+ }
+
+ up(&cam->dev_sem);
+
+ if (!cam->users)
+ kfree(cam);
+
+ up_write(&et61x251_disconnect);
+}
+
+
+static struct usb_driver et61x251_usb_driver = {
+ .name = "et61x251",
+ .id_table = et61x251_id_table,
+ .probe = et61x251_usb_probe,
+ .disconnect = et61x251_usb_disconnect,
+};
+
+/*****************************************************************************/
+
+static int __init et61x251_module_init(void)
+{
+ int err = 0;
+
+ KDBG(2, ET61X251_MODULE_NAME " v" ET61X251_MODULE_VERSION);
+ KDBG(3, ET61X251_MODULE_AUTHOR);
+
+ if ((err = usb_register(&et61x251_usb_driver)))
+ KDBG(1, "usb_register() failed");
+
+ return err;
+}
+
+
+static void __exit et61x251_module_exit(void)
+{
+ usb_deregister(&et61x251_usb_driver);
+}
+
+
+module_init(et61x251_module_init);
+module_exit(et61x251_module_exit);
diff --git a/drivers/usb/media/et61x251_sensor.h b/drivers/usb/media/et61x251_sensor.h
new file mode 100644
index 0000000..b9df910
--- /dev/null
+++ b/drivers/usb/media/et61x251_sensor.h
@@ -0,0 +1,115 @@
+/***************************************************************************
+ * API for image sensors connected to ET61X[12]51 PC Camera Controllers *
+ * *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#ifndef _ET61X251_SENSOR_H_
+#define _ET61X251_SENSOR_H_
+
+#include <linux/usb.h>
+#include <linux/videodev.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <asm/types.h>
+
+struct et61x251_device;
+struct et61x251_sensor;
+
+/*****************************************************************************/
+
+extern int et61x251_probe_tas5130d1b(struct et61x251_device* cam);
+
+#define ET61X251_SENSOR_TABLE \
+/* Weak detections must go at the end of the list */ \
+static int (*et61x251_sensor_table[])(struct et61x251_device*) = { \
+ &et61x251_probe_tas5130d1b, \
+ NULL, \
+};
+
+extern void
+et61x251_attach_sensor(struct et61x251_device* cam,
+ struct et61x251_sensor* sensor);
+
+/*****************************************************************************/
+
+extern int et61x251_write_reg(struct et61x251_device*, u8 value, u16 index);
+extern int et61x251_read_reg(struct et61x251_device*, u16 index);
+extern int et61x251_i2c_write(struct et61x251_device*, u8 address, u8 value);
+extern int et61x251_i2c_read(struct et61x251_device*, u8 address);
+extern int et61x251_i2c_try_write(struct et61x251_device*,
+ struct et61x251_sensor*, u8 address,
+ u8 value);
+extern int et61x251_i2c_try_read(struct et61x251_device*,
+ struct et61x251_sensor*, u8 address);
+extern int et61x251_i2c_raw_write(struct et61x251_device*, u8 n, u8 data1,
+ u8 data2, u8 data3, u8 data4, u8 data5,
+ u8 data6, u8 data7, u8 data8, u8 address);
+
+/*****************************************************************************/
+
+enum et61x251_i2c_sysfs_ops {
+ ET61X251_I2C_READ = 0x01,
+ ET61X251_I2C_WRITE = 0x02,
+};
+
+enum et61x251_i2c_interface {
+ ET61X251_I2C_2WIRES,
+ ET61X251_I2C_3WIRES,
+};
+
+/* Repeat start condition when RSTA is high */
+enum et61x251_i2c_rsta {
+ ET61X251_I2C_RSTA_STOP = 0x00, /* stop then start */
+ ET61X251_I2C_RSTA_REPEAT = 0x01, /* repeat start */
+};
+
+#define ET61X251_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+
+struct et61x251_sensor {
+ char name[32];
+
+ enum et61x251_i2c_sysfs_ops sysfs_ops;
+
+ enum et61x251_i2c_interface interface;
+ u8 i2c_slave_id;
+ enum et61x251_i2c_rsta rsta;
+ struct v4l2_rect active_pixel; /* left and top define FVSX and FVSY */
+
+ struct v4l2_queryctrl qctrl[ET61X251_MAX_CTRLS];
+ struct v4l2_cropcap cropcap;
+ struct v4l2_pix_format pix_format;
+
+ int (*init)(struct et61x251_device* cam);
+ int (*get_ctrl)(struct et61x251_device* cam,
+ struct v4l2_control* ctrl);
+ int (*set_ctrl)(struct et61x251_device* cam,
+ const struct v4l2_control* ctrl);
+ int (*set_crop)(struct et61x251_device* cam,
+ const struct v4l2_rect* rect);
+ int (*set_pix_format)(struct et61x251_device* cam,
+ const struct v4l2_pix_format* pix);
+
+ const struct usb_device* usbdev;
+
+ /* Private */
+ struct v4l2_queryctrl _qctrl[ET61X251_MAX_CTRLS];
+ struct v4l2_rect _rect;
+};
+
+#endif /* _ET61X251_SENSOR_H_ */
diff --git a/drivers/usb/media/et61x251_tas5130d1b.c b/drivers/usb/media/et61x251_tas5130d1b.c
new file mode 100644
index 0000000..65f1ae9
--- /dev/null
+++ b/drivers/usb/media/et61x251_tas5130d1b.c
@@ -0,0 +1,137 @@
+/***************************************************************************
+ * Plug-in for TAS5130D1B image sensor connected to the ET61X[12]51 *
+ * PC Camera Controllers *
+ * *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the Free Software *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
+ ***************************************************************************/
+
+#include "et61x251_sensor.h"
+
+
+static int tas5130d1b_init(struct et61x251_device* cam)
+{
+ int err = 0;
+
+ err += et61x251_write_reg(cam, 0x14, 0x01);
+ err += et61x251_write_reg(cam, 0x1b, 0x02);
+ err += et61x251_write_reg(cam, 0x02, 0x12);
+ err += et61x251_write_reg(cam, 0x0e, 0x60);
+ err += et61x251_write_reg(cam, 0x80, 0x61);
+ err += et61x251_write_reg(cam, 0xf0, 0x62);
+ err += et61x251_write_reg(cam, 0x03, 0x63);
+ err += et61x251_write_reg(cam, 0x14, 0x64);
+ err += et61x251_write_reg(cam, 0xf4, 0x65);
+ err += et61x251_write_reg(cam, 0x01, 0x66);
+ err += et61x251_write_reg(cam, 0x05, 0x67);
+ err += et61x251_write_reg(cam, 0x8f, 0x68);
+ err += et61x251_write_reg(cam, 0x0f, 0x8d);
+ err += et61x251_write_reg(cam, 0x08, 0x8e);
+
+ return err;
+}
+
+
+static int tas5130d1b_set_ctrl(struct et61x251_device* cam,
+ const struct v4l2_control* ctrl)
+{
+ int err = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ err += et61x251_i2c_raw_write(cam, 2, 0x20,
+ 0xf6-ctrl->value, 0, 0, 0,
+ 0, 0, 0, 0);
+ break;
+ case V4L2_CID_EXPOSURE:
+ err += et61x251_i2c_raw_write(cam, 2, 0x40,
+ 0x47-ctrl->value, 0, 0, 0,
+ 0, 0, 0, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return err ? -EIO : 0;
+}
+
+
+static struct et61x251_sensor tas5130d1b = {
+ .name = "TAS5130D1B",
+ .interface = ET61X251_I2C_3WIRES,
+ .rsta = ET61X251_I2C_RSTA_STOP,
+ .active_pixel = {
+ .left = 106,
+ .top = 13,
+ },
+ .init = &tas5130d1b_init,
+ .qctrl = {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "global gain",
+ .minimum = 0x00,
+ .maximum = 0xf6,
+ .step = 0x02,
+ .default_value = 0x0d,
+ .flags = 0,
+ },
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "exposure",
+ .minimum = 0x00,
+ .maximum = 0x47,
+ .step = 0x01,
+ .default_value = 0x23,
+ .flags = 0,
+ },
+ },
+ .set_ctrl = &tas5130d1b_set_ctrl,
+ .cropcap = {
+ .bounds = {
+ .left = 0,
+ .top = 0,
+ .width = 640,
+ .height = 480,
+ },
+ .defrect = {
+ .left = 0,
+ .top = 0,
+ .width = 640,
+ .height = 480,
+ },
+ },
+ .pix_format = {
+ .width = 640,
+ .height = 480,
+ .pixelformat = V4L2_PIX_FMT_SBGGR8,
+ .priv = 8,
+ },
+};
+
+
+int et61x251_probe_tas5130d1b(struct et61x251_device* cam)
+{
+ /* This sensor has no identifiers, so let's attach it anyway */
+ et61x251_attach_sensor(cam, &tas5130d1b);
+
+ /* Sensor detection is based on USB pid/vid */
+ if (le16_to_cpu(tas5130d1b.usbdev->descriptor.idProduct) != 0x6251)
+ return -ENODEV;
+
+ return 0;
+}
diff --git a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c
index 8af665b..51e9cc0 100644
--- a/drivers/usb/media/ov511.c
+++ b/drivers/usb/media/ov511.c
@@ -204,22 +204,10 @@
static struct usb_driver ov511_driver;
-static struct ov51x_decomp_ops *ov511_decomp_ops;
-static struct ov51x_decomp_ops *ov511_mmx_decomp_ops;
-static struct ov51x_decomp_ops *ov518_decomp_ops;
-static struct ov51x_decomp_ops *ov518_mmx_decomp_ops;
-
/* Number of times to retry a failed I2C transaction. Increase this if you
* are getting "Failed to read sensor ID..." */
static const int i2c_detect_tries = 5;
-/* MMX support is present in kernel and CPU. Checked upon decomp module load. */
-#if defined(__i386__) || defined(__x86_64__)
-#define ov51x_mmx_available (cpu_has_mmx)
-#else
-#define ov51x_mmx_available (0)
-#endif
-
static struct usb_device_id device_table [] = {
{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
@@ -3012,93 +3000,18 @@
*
**********************************************************************/
-/* Chooses a decompression module, locks it, and sets ov->decomp_ops
- * accordingly. Returns -ENXIO if decompressor is not available, otherwise
- * returns 0 if no other error.
- */
static int
request_decompressor(struct usb_ov511 *ov)
{
- if (!ov)
- return -ENODEV;
-
- if (ov->decomp_ops) {
- err("ERROR: Decompressor already requested!");
- return -EINVAL;
- }
-
- lock_kernel();
-
- /* Try to get MMX, and fall back on no-MMX if necessary */
- if (ov->bclass == BCL_OV511) {
- if (ov511_mmx_decomp_ops) {
- PDEBUG(3, "Using OV511 MMX decompressor");
- ov->decomp_ops = ov511_mmx_decomp_ops;
- } else if (ov511_decomp_ops) {
- PDEBUG(3, "Using OV511 decompressor");
- ov->decomp_ops = ov511_decomp_ops;
- } else {
- err("No decompressor available");
- }
- } else if (ov->bclass == BCL_OV518) {
- if (ov518_mmx_decomp_ops) {
- PDEBUG(3, "Using OV518 MMX decompressor");
- ov->decomp_ops = ov518_mmx_decomp_ops;
- } else if (ov518_decomp_ops) {
- PDEBUG(3, "Using OV518 decompressor");
- ov->decomp_ops = ov518_decomp_ops;
- } else {
- err("No decompressor available");
- }
+ if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) {
+ err("No decompressor available");
} else {
err("Unknown bridge");
}
- if (!ov->decomp_ops)
- goto nosys;
-
- if (!ov->decomp_ops->owner) {
- ov->decomp_ops = NULL;
- goto nosys;
- }
-
- if (!try_module_get(ov->decomp_ops->owner))
- goto nosys;
-
- unlock_kernel();
- return 0;
-
- nosys:
- unlock_kernel();
return -ENOSYS;
}
-/* Unlocks decompression module and nulls ov->decomp_ops. Safe to call even
- * if ov->decomp_ops is NULL.
- */
-static void
-release_decompressor(struct usb_ov511 *ov)
-{
- int released = 0; /* Did we actually do anything? */
-
- if (!ov)
- return;
-
- lock_kernel();
-
- if (ov->decomp_ops) {
- module_put(ov->decomp_ops->owner);
- released = 1;
- }
-
- ov->decomp_ops = NULL;
-
- unlock_kernel();
-
- if (released)
- PDEBUG(3, "Decompressor released");
-}
-
static void
decompress(struct usb_ov511 *ov, struct ov511_frame *frame,
unsigned char *pIn0, unsigned char *pOut0)
@@ -3107,31 +3020,6 @@
if (request_decompressor(ov))
return;
- PDEBUG(4, "Decompressing %d bytes", frame->bytes_recvd);
-
- if (frame->format == VIDEO_PALETTE_GREY
- && ov->decomp_ops->decomp_400) {
- int ret = ov->decomp_ops->decomp_400(
- pIn0,
- pOut0,
- frame->compbuf,
- frame->rawwidth,
- frame->rawheight,
- frame->bytes_recvd);
- PDEBUG(4, "DEBUG: decomp_400 returned %d", ret);
- } else if (frame->format != VIDEO_PALETTE_GREY
- && ov->decomp_ops->decomp_420) {
- int ret = ov->decomp_ops->decomp_420(
- pIn0,
- pOut0,
- frame->compbuf,
- frame->rawwidth,
- frame->rawheight,
- frame->bytes_recvd);
- PDEBUG(4, "DEBUG: decomp_420 returned %d", ret);
- } else {
- err("Decompressor does not support this format");
- }
}
/**********************************************************************
@@ -4087,8 +3975,6 @@
ov->user--;
ov51x_stop_isoc(ov);
- release_decompressor(ov);
-
if (ov->led_policy == LED_AUTO)
ov51x_led_control(ov, 0);
@@ -6021,82 +5907,6 @@
*
***************************************************************************/
-/* Returns 0 for success */
-int
-ov511_register_decomp_module(int ver, struct ov51x_decomp_ops *ops, int ov518,
- int mmx)
-{
- if (ver != DECOMP_INTERFACE_VER) {
- err("Decompression module has incompatible");
- err("interface version %d", ver);
- err("Interface version %d is required", DECOMP_INTERFACE_VER);
- return -EINVAL;
- }
-
- if (!ops)
- return -EFAULT;
-
- if (mmx && !ov51x_mmx_available) {
- err("MMX not available on this system or kernel");
- return -EINVAL;
- }
-
- lock_kernel();
-
- if (ov518) {
- if (mmx) {
- if (ov518_mmx_decomp_ops)
- goto err_in_use;
- else
- ov518_mmx_decomp_ops = ops;
- } else {
- if (ov518_decomp_ops)
- goto err_in_use;
- else
- ov518_decomp_ops = ops;
- }
- } else {
- if (mmx) {
- if (ov511_mmx_decomp_ops)
- goto err_in_use;
- else
- ov511_mmx_decomp_ops = ops;
- } else {
- if (ov511_decomp_ops)
- goto err_in_use;
- else
- ov511_decomp_ops = ops;
- }
- }
-
- unlock_kernel();
- return 0;
-
-err_in_use:
- unlock_kernel();
- return -EBUSY;
-}
-
-void
-ov511_deregister_decomp_module(int ov518, int mmx)
-{
- lock_kernel();
-
- if (ov518) {
- if (mmx)
- ov518_mmx_decomp_ops = NULL;
- else
- ov518_decomp_ops = NULL;
- } else {
- if (mmx)
- ov511_mmx_decomp_ops = NULL;
- else
- ov511_decomp_ops = NULL;
- }
-
- unlock_kernel();
-}
-
static int __init
usb_ov511_init(void)
{
@@ -6123,5 +5933,3 @@
module_init(usb_ov511_init);
module_exit(usb_ov511_exit);
-EXPORT_SYMBOL(ov511_register_decomp_module);
-EXPORT_SYMBOL(ov511_deregister_decomp_module);
diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c
index 359c4b2..3ebb6e9 100644
--- a/drivers/usb/media/pwc/pwc-ctrl.c
+++ b/drivers/usb/media/pwc/pwc-ctrl.c
@@ -1152,45 +1152,6 @@
/* End of Add-Ons */
/* ************************************************* */
-/* Linux 2.5.something and 2.6 pass direct pointers to arguments of
- ioctl() calls. With 2.4, you have to do tedious copy_from_user()
- and copy_to_user() calls. With these macros we circumvent this,
- and let me maintain only one source file. The functionality is
- exactly the same otherwise.
- */
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
-
-/* define local variable for arg */
-#define ARG_DEF(ARG_type, ARG_name)\
- ARG_type *ARG_name = arg;
-/* copy arg to local variable */
-#define ARG_IN(ARG_name) /* nothing */
-/* argument itself (referenced) */
-#define ARGR(ARG_name) (*ARG_name)
-/* argument address */
-#define ARGA(ARG_name) ARG_name
-/* copy local variable to arg */
-#define ARG_OUT(ARG_name) /* nothing */
-
-#else
-
-#define ARG_DEF(ARG_type, ARG_name)\
- ARG_type ARG_name;
-#define ARG_IN(ARG_name)\
- if (copy_from_user(&ARG_name, arg, sizeof(ARG_name))) {\
- ret = -EFAULT;\
- break;\
- }
-#define ARGR(ARG_name) ARG_name
-#define ARGA(ARG_name) &ARG_name
-#define ARG_OUT(ARG_name)\
- if (copy_to_user(arg, &ARG_name, sizeof(ARG_name))) {\
- ret = -EFAULT;\
- break;\
- }
-
-#endif
int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
{
@@ -1220,243 +1181,206 @@
case VIDIOCPWCSCQUAL:
{
- ARG_DEF(int, qual)
+ int *qual = arg;
- ARG_IN(qual)
- if (ARGR(qual) < 0 || ARGR(qual) > 3)
+ if (*qual < 0 || *qual > 3)
ret = -EINVAL;
else
- ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
+ ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot);
if (ret >= 0)
- pdev->vcompression = ARGR(qual);
+ pdev->vcompression = *qual;
break;
}
case VIDIOCPWCGCQUAL:
{
- ARG_DEF(int, qual)
-
- ARGR(qual) = pdev->vcompression;
- ARG_OUT(qual)
+ int *qual = arg;
+ *qual = pdev->vcompression;
break;
}
case VIDIOCPWCPROBE:
{
- ARG_DEF(struct pwc_probe, probe)
-
- strcpy(ARGR(probe).name, pdev->vdev->name);
- ARGR(probe).type = pdev->type;
- ARG_OUT(probe)
+ struct pwc_probe *probe = arg;
+ strcpy(probe->name, pdev->vdev->name);
+ probe->type = pdev->type;
break;
}
case VIDIOCPWCGSERIAL:
{
- ARG_DEF(struct pwc_serial, serial)
-
- strcpy(ARGR(serial).serial, pdev->serial);
- ARG_OUT(serial)
+ struct pwc_serial *serial = arg;
+ strcpy(serial->serial, pdev->serial);
break;
}
case VIDIOCPWCSAGC:
{
- ARG_DEF(int, agc)
-
- ARG_IN(agc)
- if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc)))
+ int *agc = arg;
+ if (pwc_set_agc(pdev, *agc < 0 ? 1 : 0, *agc))
ret = -EINVAL;
break;
}
case VIDIOCPWCGAGC:
{
- ARG_DEF(int, agc)
+ int *agc = arg;
- if (pwc_get_agc(pdev, ARGA(agc)))
+ if (pwc_get_agc(pdev, agc))
ret = -EINVAL;
- ARG_OUT(agc)
break;
}
case VIDIOCPWCSSHUTTER:
{
- ARG_DEF(int, shutter_speed)
-
- ARG_IN(shutter_speed)
- ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed));
+ int *shutter_speed = arg;
+ ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed);
break;
}
case VIDIOCPWCSAWB:
{
- ARG_DEF(struct pwc_whitebalance, wb)
+ struct pwc_whitebalance *wb = arg;
- ARG_IN(wb)
- ret = pwc_set_awb(pdev, ARGR(wb).mode);
- if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) {
- pwc_set_red_gain(pdev, ARGR(wb).manual_red);
- pwc_set_blue_gain(pdev, ARGR(wb).manual_blue);
+ ret = pwc_set_awb(pdev, wb->mode);
+ if (ret >= 0 && wb->mode == PWC_WB_MANUAL) {
+ pwc_set_red_gain(pdev, wb->manual_red);
+ pwc_set_blue_gain(pdev, wb->manual_blue);
}
break;
}
case VIDIOCPWCGAWB:
{
- ARG_DEF(struct pwc_whitebalance, wb)
+ struct pwc_whitebalance *wb = arg;
- memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance));
- ARGR(wb).mode = pwc_get_awb(pdev);
- if (ARGR(wb).mode < 0)
+ memset(wb, 0, sizeof(struct pwc_whitebalance));
+ wb->mode = pwc_get_awb(pdev);
+ if (wb->mode < 0)
ret = -EINVAL;
else {
- if (ARGR(wb).mode == PWC_WB_MANUAL) {
- ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red);
+ if (wb->mode == PWC_WB_MANUAL) {
+ ret = pwc_get_red_gain(pdev, &wb->manual_red);
if (ret < 0)
break;
- ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue);
+ ret = pwc_get_blue_gain(pdev, &wb->manual_blue);
if (ret < 0)
break;
}
- if (ARGR(wb).mode == PWC_WB_AUTO) {
- ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red);
+ if (wb->mode == PWC_WB_AUTO) {
+ ret = pwc_read_red_gain(pdev, &wb->read_red);
if (ret < 0)
break;
- ret =pwc_read_blue_gain(pdev, &ARGR(wb).read_blue);
+ ret = pwc_read_blue_gain(pdev, &wb->read_blue);
if (ret < 0)
break;
}
}
- ARG_OUT(wb)
break;
}
case VIDIOCPWCSAWBSPEED:
{
- ARG_DEF(struct pwc_wb_speed, wbs)
+ struct pwc_wb_speed *wbs = arg;
- if (ARGR(wbs).control_speed > 0) {
- ret = pwc_set_wb_speed(pdev, ARGR(wbs).control_speed);
+ if (wbs->control_speed > 0) {
+ ret = pwc_set_wb_speed(pdev, wbs->control_speed);
}
- if (ARGR(wbs).control_delay > 0) {
- ret = pwc_set_wb_delay(pdev, ARGR(wbs).control_delay);
+ if (wbs->control_delay > 0) {
+ ret = pwc_set_wb_delay(pdev, wbs->control_delay);
}
break;
}
case VIDIOCPWCGAWBSPEED:
{
- ARG_DEF(struct pwc_wb_speed, wbs)
+ struct pwc_wb_speed *wbs = arg;
- ret = pwc_get_wb_speed(pdev, &ARGR(wbs).control_speed);
+ ret = pwc_get_wb_speed(pdev, &wbs->control_speed);
if (ret < 0)
break;
- ret = pwc_get_wb_delay(pdev, &ARGR(wbs).control_delay);
+ ret = pwc_get_wb_delay(pdev, &wbs->control_delay);
if (ret < 0)
break;
- ARG_OUT(wbs)
break;
}
case VIDIOCPWCSLED:
{
- ARG_DEF(struct pwc_leds, leds)
-
- ARG_IN(leds)
- ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off);
+ struct pwc_leds *leds = arg;
+ ret = pwc_set_leds(pdev, leds->led_on, leds->led_off);
break;
}
case VIDIOCPWCGLED:
{
- ARG_DEF(struct pwc_leds, leds)
-
- ret = pwc_get_leds(pdev, &ARGR(leds).led_on, &ARGR(leds).led_off);
- ARG_OUT(leds)
+ struct pwc_leds *leds = arg;
+ ret = pwc_get_leds(pdev, &leds->led_on, &leds->led_off);
break;
}
case VIDIOCPWCSCONTOUR:
{
- ARG_DEF(int, contour)
-
- ARG_IN(contour)
- ret = pwc_set_contour(pdev, ARGR(contour));
+ int *contour = arg;
+ ret = pwc_set_contour(pdev, *contour);
break;
}
case VIDIOCPWCGCONTOUR:
{
- ARG_DEF(int, contour)
-
- ret = pwc_get_contour(pdev, ARGA(contour));
- ARG_OUT(contour)
+ int *contour = arg;
+ ret = pwc_get_contour(pdev, contour);
break;
}
case VIDIOCPWCSBACKLIGHT:
{
- ARG_DEF(int, backlight)
-
- ARG_IN(backlight)
- ret = pwc_set_backlight(pdev, ARGR(backlight));
+ int *backlight = arg;
+ ret = pwc_set_backlight(pdev, *backlight);
break;
}
case VIDIOCPWCGBACKLIGHT:
{
- ARG_DEF(int, backlight)
-
- ret = pwc_get_backlight(pdev, ARGA(backlight));
- ARG_OUT(backlight)
+ int *backlight = arg;
+ ret = pwc_get_backlight(pdev, backlight);
break;
}
case VIDIOCPWCSFLICKER:
{
- ARG_DEF(int, flicker)
-
- ARG_IN(flicker)
- ret = pwc_set_flicker(pdev, ARGR(flicker));
+ int *flicker = arg;
+ ret = pwc_set_flicker(pdev, *flicker);
break;
}
case VIDIOCPWCGFLICKER:
{
- ARG_DEF(int, flicker)
-
- ret = pwc_get_flicker(pdev, ARGA(flicker));
- ARG_OUT(flicker)
+ int *flicker = arg;
+ ret = pwc_get_flicker(pdev, flicker);
break;
}
case VIDIOCPWCSDYNNOISE:
{
- ARG_DEF(int, dynnoise)
-
- ARG_IN(dynnoise)
- ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise));
+ int *dynnoise = arg;
+ ret = pwc_set_dynamic_noise(pdev, *dynnoise);
break;
}
case VIDIOCPWCGDYNNOISE:
{
- ARG_DEF(int, dynnoise)
-
- ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise));
- ARG_OUT(dynnoise);
+ int *dynnoise = arg;
+ ret = pwc_get_dynamic_noise(pdev, dynnoise);
break;
}
case VIDIOCPWCGREALSIZE:
{
- ARG_DEF(struct pwc_imagesize, size)
-
- ARGR(size).width = pdev->image.x;
- ARGR(size).height = pdev->image.y;
- ARG_OUT(size)
+ struct pwc_imagesize *size = arg;
+ size->width = pdev->image.x;
+ size->height = pdev->image.y;
break;
}
@@ -1464,10 +1388,9 @@
{
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(int, flags)
+ int *flags = arg;
- ARG_IN(flags)
- ret = pwc_mpt_reset(pdev, ARGR(flags));
+ ret = pwc_mpt_reset(pdev, *flags);
if (ret >= 0)
{
pdev->pan_angle = 0;
@@ -1485,10 +1408,8 @@
{
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(struct pwc_mpt_range, range)
-
- ARGR(range) = pdev->angle_range;
- ARG_OUT(range)
+ struct pwc_mpt_range *range = arg;
+ *range = pdev->angle_range;
}
else
{
@@ -1503,21 +1424,19 @@
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(struct pwc_mpt_angles, angles)
-
- ARG_IN(angles)
+ struct pwc_mpt_angles *angles = arg;
/* The camera can only set relative angles, so
do some calculations when getting an absolute angle .
*/
- if (ARGR(angles).absolute)
+ if (angles->absolute)
{
- new_pan = ARGR(angles).pan;
- new_tilt = ARGR(angles).tilt;
+ new_pan = angles->pan;
+ new_tilt = angles->tilt;
}
else
{
- new_pan = pdev->pan_angle + ARGR(angles).pan;
- new_tilt = pdev->tilt_angle + ARGR(angles).tilt;
+ new_pan = pdev->pan_angle + angles->pan;
+ new_tilt = pdev->tilt_angle + angles->tilt;
}
/* check absolute ranges */
if (new_pan < pdev->angle_range.pan_min ||
@@ -1560,12 +1479,11 @@
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(struct pwc_mpt_angles, angles)
+ struct pwc_mpt_angles *angles = arg;
- ARGR(angles).absolute = 1;
- ARGR(angles).pan = pdev->pan_angle;
- ARGR(angles).tilt = pdev->tilt_angle;
- ARG_OUT(angles)
+ angles->absolute = 1;
+ angles->pan = pdev->pan_angle;
+ angles->tilt = pdev->tilt_angle;
}
else
{
@@ -1578,10 +1496,8 @@
{
if (pdev->features & FEATURE_MOTOR_PANTILT)
{
- ARG_DEF(struct pwc_mpt_status, status)
-
- ret = pwc_mpt_get_status(pdev, ARGA(status));
- ARG_OUT(status)
+ struct pwc_mpt_status *status = arg;
+ ret = pwc_mpt_get_status(pdev, status);
}
else
{
@@ -1592,24 +1508,22 @@
case VIDIOCPWCGVIDCMD:
{
- ARG_DEF(struct pwc_video_command, cmd);
+ struct pwc_video_command *cmd = arg;
- ARGR(cmd).type = pdev->type;
- ARGR(cmd).release = pdev->release;
- ARGR(cmd).command_len = pdev->cmd_len;
- memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
- ARGR(cmd).bandlength = pdev->vbandlength;
- ARGR(cmd).frame_size = pdev->frame_size;
- ARG_OUT(cmd)
+ cmd->type = pdev->type;
+ cmd->release = pdev->release;
+ cmd->command_len = pdev->cmd_len;
+ memcpy(&cmd->command_buf, pdev->cmd_buf, pdev->cmd_len);
+ cmd->bandlength = pdev->vbandlength;
+ cmd->frame_size = pdev->frame_size;
break;
}
/*
case VIDIOCPWCGVIDTABLE:
{
- ARG_DEF(struct pwc_table_init_buffer, table);
- ARGR(table).len = pdev->cmd_len;
- memcpy(&ARGR(table).buffer, pdev->decompress_data, pdev->decompressor->table_size);
- ARG_OUT(table)
+ struct pwc_table_init_buffer *table = arg;
+ table->len = pdev->cmd_len;
+ memcpy(&table->buffer, pdev->decompress_data, pdev->decompressor->table_size);
break;
}
*/
diff --git a/drivers/usb/media/sn9c102.h b/drivers/usb/media/sn9c102.h
index e5cea0e..17d60c1 100644
--- a/drivers/usb/media/sn9c102.h
+++ b/drivers/usb/media/sn9c102.h
@@ -1,7 +1,7 @@
/***************************************************************************
* V4L2 driver for SN9C10x PC Camera Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
@@ -23,7 +23,8 @@
#include <linux/version.h>
#include <linux/usb.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/spinlock.h>
@@ -52,13 +53,6 @@
/*****************************************************************************/
-#define SN9C102_MODULE_NAME "V4L2 driver for SN9C10x PC Camera Controllers"
-#define SN9C102_MODULE_AUTHOR "(C) 2004-2005 Luca Risolia"
-#define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
-#define SN9C102_MODULE_LICENSE "GPL"
-#define SN9C102_MODULE_VERSION "1:1.24a"
-#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 24)
-
enum sn9c102_bridge {
BRIDGE_SN9C101 = 0x01,
BRIDGE_SN9C102 = 0x02,
@@ -102,12 +96,13 @@
STREAM_ON,
};
+typedef char sn9c103_sof_header_t[18];
typedef char sn9c102_sof_header_t[12];
typedef char sn9c102_eof_header_t[4];
struct sn9c102_sysfs_attr {
u8 reg, i2c_reg;
- sn9c102_sof_header_t frame_header;
+ sn9c103_sof_header_t frame_header;
};
struct sn9c102_module_param {
@@ -118,8 +113,6 @@
static DECLARE_RWSEM(sn9c102_disconnect);
struct sn9c102_device {
- struct device dev;
-
struct video_device* v4ldev;
enum sn9c102_bridge bridge;
@@ -140,8 +133,8 @@
struct v4l2_jpegcompression compression;
struct sn9c102_sysfs_attr sysfs;
- sn9c102_sof_header_t sof_header;
- u16 reg[32];
+ sn9c103_sof_header_t sof_header;
+ u16 reg[63];
struct sn9c102_module_param module_param;
@@ -160,7 +153,6 @@
struct sn9c102_sensor* sensor)
{
cam->sensor = sensor;
- cam->sensor->dev = &cam->dev;
cam->sensor->usbdev = cam->usbdev;
}
@@ -170,19 +162,24 @@
#undef KDBG
#ifdef SN9C102_DEBUG
# define DBG(level, fmt, args...) \
-{ \
+do { \
if (debug >= (level)) { \
if ((level) == 1) \
- dev_err(&cam->dev, fmt "\n", ## args); \
+ dev_err(&cam->usbdev->dev, fmt "\n", ## args); \
else if ((level) == 2) \
- dev_info(&cam->dev, fmt "\n", ## args); \
+ dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
else if ((level) >= 3) \
- dev_info(&cam->dev, "[%s:%d] " fmt "\n", \
+ dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
__FUNCTION__, __LINE__ , ## args); \
} \
-}
+} while (0)
+# define V4LDBG(level, name, cmd) \
+do { \
+ if (debug >= (level)) \
+ v4l_print_ioctl(name, cmd); \
+} while (0)
# define KDBG(level, fmt, args...) \
-{ \
+do { \
if (debug >= (level)) { \
if ((level) == 1 || (level) == 2) \
pr_info("sn9c102: " fmt "\n", ## args); \
@@ -190,17 +187,18 @@
pr_debug("sn9c102: [%s:%d] " fmt "\n", __FUNCTION__, \
__LINE__ , ## args); \
} \
-}
+} while (0)
#else
-# define KDBG(level, fmt, args...) do {;} while(0);
-# define DBG(level, fmt, args...) do {;} while(0);
+# define DBG(level, fmt, args...) do {;} while(0)
+# define V4LDBG(level, name, cmd) do {;} while(0)
+# define KDBG(level, fmt, args...) do {;} while(0)
#endif
#undef PDBG
#define PDBG(fmt, args...) \
-dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args);
+dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
#undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0); /* placeholder */
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
#endif /* _SN9C102_H_ */
diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c
index 8d1a1c3..c81397e 100644
--- a/drivers/usb/media/sn9c102_core.c
+++ b/drivers/usb/media/sn9c102_core.c
@@ -1,7 +1,7 @@
/***************************************************************************
* V4L2 driver for SN9C10x PC Camera Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
@@ -45,6 +45,15 @@
/*****************************************************************************/
+#define SN9C102_MODULE_NAME "V4L2 driver for SN9C10x PC Camera Controllers"
+#define SN9C102_MODULE_AUTHOR "(C) 2004-2006 Luca Risolia"
+#define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
+#define SN9C102_MODULE_LICENSE "GPL"
+#define SN9C102_MODULE_VERSION "1:1.26"
+#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 26)
+
+/*****************************************************************************/
+
MODULE_DEVICE_TABLE(usb, sn9c102_id_table);
MODULE_AUTHOR(SN9C102_MODULE_AUTHOR " " SN9C102_AUTHOR_EMAIL);
@@ -70,10 +79,10 @@
SN9C102_FORCE_MUNMAP};
module_param_array(force_munmap, bool, NULL, 0444);
MODULE_PARM_DESC(force_munmap,
- "\n<0|1[,...]> Force the application to unmap previously "
- "\nmapped buffer memory before calling any VIDIOC_S_CROP or "
- "\nVIDIOC_S_FMT ioctl's. Not all the applications support "
- "\nthis feature. This parameter is specific for each "
+ "\n<0|1[,...]> Force the application to unmap previously"
+ "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+ "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+ "\nthis feature. This parameter is specific for each"
"\ndetected camera."
"\n 0 = do not force memory unmapping"
"\n 1 = force memory unmapping (save memory)"
@@ -102,6 +111,9 @@
{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x01},
};
+static sn9c103_sof_header_t sn9c103_sof_header[] = {
+ {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x20},
+};
static sn9c102_eof_header_t sn9c102_eof_header[] = {
{0x00, 0x00, 0x00, 0x00},
@@ -112,50 +124,6 @@
/*****************************************************************************/
-static void* rvmalloc(size_t size)
-{
- void* mem;
- unsigned long adr;
-
- size = PAGE_ALIGN(size);
-
- mem = vmalloc_32((unsigned long)size);
- if (!mem)
- return NULL;
-
- memset(mem, 0, size);
-
- adr = (unsigned long)mem;
- while (size > 0) {
- SetPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- return mem;
-}
-
-
-static void rvfree(void* mem, size_t size)
-{
- unsigned long adr;
-
- if (!mem)
- return;
-
- size = PAGE_ALIGN(size);
-
- adr = (unsigned long)mem;
- while (size > 0) {
- ClearPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- vfree(mem);
-}
-
-
static u32
sn9c102_request_buffers(struct sn9c102_device* cam, u32 count,
enum sn9c102_io_method io)
@@ -174,7 +142,7 @@
cam->nbuffers = count;
while (cam->nbuffers > 0) {
- if ((buff = rvmalloc(cam->nbuffers * PAGE_ALIGN(imagesize))))
+ if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
break;
cam->nbuffers--;
}
@@ -198,10 +166,10 @@
static void sn9c102_release_buffers(struct sn9c102_device* cam)
{
if (cam->nbuffers) {
- rvfree(cam->frame[0].bufmem,
- cam->nbuffers * PAGE_ALIGN(cam->frame[0].buf.length));
+ vfree(cam->frame[0].bufmem);
cam->nbuffers = 0;
}
+ cam->frame_current = NULL;
}
@@ -219,6 +187,19 @@
}
+static void sn9c102_requeue_outqueue(struct sn9c102_device* cam)
+{
+ struct sn9c102_frame_t *i;
+
+ list_for_each_entry(i, &cam->outqueue, frame) {
+ i->state = F_QUEUED;
+ list_add(&i->frame, &cam->inqueue);
+ }
+
+ INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
static void sn9c102_queue_unusedframes(struct sn9c102_device* cam)
{
unsigned long lock_flags;
@@ -235,19 +216,46 @@
/*****************************************************************************/
+int sn9c102_write_regs(struct sn9c102_device* cam, u8* buff, u16 index)
+{
+ struct usb_device* udev = cam->usbdev;
+ int i, res;
+
+ if (index + sizeof(buff) >= ARRAY_SIZE(cam->reg))
+ return -1;
+
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
+ index, 0, buff, sizeof(buff),
+ SN9C102_CTRL_TIMEOUT*sizeof(buff));
+ if (res < 0) {
+ DBG(3, "Failed to write registers (index 0x%02X, error %d)",
+ index, res);
+ return -1;
+ }
+
+ for (i = 0; i < sizeof(buff); i++)
+ cam->reg[index+i] = buff[i];
+
+ return 0;
+}
+
+
int sn9c102_write_reg(struct sn9c102_device* cam, u8 value, u16 index)
{
struct usb_device* udev = cam->usbdev;
u8* buff = cam->control_buffer;
int res;
+ if (index >= ARRAY_SIZE(cam->reg))
+ return -1;
+
*buff = value;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
if (res < 0) {
DBG(3, "Failed to write a register (value 0x%02X, index "
- "0x%02X, error %d)", value, index, res)
+ "0x%02X, error %d)", value, index, res);
return -1;
}
@@ -268,7 +276,7 @@
index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
if (res < 0)
DBG(3, "Failed to read a register (index 0x%02X, error %d)",
- index, res)
+ index, res);
return (res >= 0) ? (int)(*buff) : -1;
}
@@ -276,8 +284,8 @@
int sn9c102_pread_reg(struct sn9c102_device* cam, u16 index)
{
- if (index > 0x1f)
- return -EINVAL;
+ if (index >= ARRAY_SIZE(cam->reg))
+ return -1;
return cam->reg[index];
}
@@ -367,10 +375,10 @@
err += sn9c102_i2c_detect_read_error(cam, sensor);
PDBGG("I2C read: address 0x%02X, first read byte: 0x%02X", data1,
- data[4])
+ data[4]);
if (err) {
- DBG(3, "I2C read failed for %s image sensor", sensor->name)
+ DBG(3, "I2C read failed for %s image sensor", sensor->name);
return -1;
}
@@ -410,11 +418,11 @@
err += sn9c102_i2c_detect_write_error(cam, sensor);
if (err)
- DBG(3, "I2C write failed for %s image sensor", sensor->name)
+ DBG(3, "I2C write failed for %s image sensor", sensor->name);
PDBGG("I2C raw write: %u bytes, data0 = 0x%02X, data1 = 0x%02X, "
"data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X",
- n, data0, data1, data2, data3, data4, data5)
+ n, data0, data1, data2, data3, data4, data5);
return err ? -1 : 0;
}
@@ -461,13 +469,27 @@
static void*
sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len)
{
- size_t soflen = sizeof(sn9c102_sof_header_t), i;
- u8 j, n = sizeof(sn9c102_sof_header) / soflen;
+ size_t soflen = 0, i;
+ u8 j, n = 0;
- for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
+ switch (cam->bridge) {
+ case BRIDGE_SN9C101:
+ case BRIDGE_SN9C102:
+ soflen = sizeof(sn9c102_sof_header_t);
+ n = sizeof(sn9c102_sof_header) / soflen;
+ break;
+ case BRIDGE_SN9C103:
+ soflen = sizeof(sn9c103_sof_header_t);
+ n = sizeof(sn9c103_sof_header) / soflen;
+ }
+
+ for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
for (j = 0; j < n; j++)
- /* It's enough to compare 7 bytes */
- if (!memcmp(mem + i, sn9c102_sof_header[j], 7)) {
+ /* The invariable part of the header is 6 bytes long */
+ if ((cam->bridge != BRIDGE_SN9C103 &&
+ !memcmp(mem + i, sn9c102_sof_header[j], 6)) ||
+ (cam->bridge == BRIDGE_SN9C103 &&
+ !memcmp(mem + i, sn9c103_sof_header[j], 6))) {
memcpy(cam->sof_header, mem + i, soflen);
/* Skip the header */
return mem + i + soflen;
@@ -499,8 +521,7 @@
{
struct sn9c102_device* cam = urb->context;
struct sn9c102_frame_t** f;
- size_t imagesize;
- unsigned long lock_flags;
+ size_t imagesize, soflen;
u8 i;
int err = 0;
@@ -513,7 +534,7 @@
cam->stream = STREAM_OFF;
if ((*f))
(*f)->state = F_QUEUED;
- DBG(3, "Stream interrupted")
+ DBG(3, "Stream interrupted");
wake_up_interruptible(&cam->wait_stream);
}
@@ -536,6 +557,10 @@
cam->sensor->pix_format.height *
cam->sensor->pix_format.priv) / 8;
+ soflen = (cam->bridge) == BRIDGE_SN9C103 ?
+ sizeof(sn9c103_sof_header_t) :
+ sizeof(sn9c102_sof_header_t);
+
for (i = 0; i < urb->number_of_packets; i++) {
unsigned int img, len, status;
void *pos, *sof, *eof;
@@ -545,19 +570,12 @@
pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
if (status) {
- DBG(3, "Error in isochronous frame")
+ DBG(3, "Error in isochronous frame");
(*f)->state = F_ERROR;
continue;
}
- PDBGG("Isochrnous frame: length %u, #%u i", len, i)
-
- /*
- NOTE: It is probably correct to assume that SOF and EOF
- headers do not occur between two consecutive packets,
- but who knows..Whatever is the truth, this assumption
- doesn't introduce bugs.
- */
+ PDBGG("Isochrnous frame: length %u, #%u i", len, i);
redo:
sof = sn9c102_find_sof_header(cam, pos, len);
@@ -575,10 +593,10 @@
imagesize;
img = imagesize - (*f)->buf.bytesused;
DBG(3, "Expected EOF not found: "
- "video frame cut")
+ "video frame cut");
if (eof)
DBG(3, "Exceeded limit: +%u "
- "bytes", (unsigned)(b))
+ "bytes", (unsigned)(b));
}
memcpy((*f)->bufmem + (*f)->buf.bytesused, pos,
@@ -595,8 +613,7 @@
u32 b = (*f)->buf.bytesused;
(*f)->state = F_DONE;
(*f)->buf.sequence= ++cam->frame_count;
- spin_lock_irqsave(&cam->queue_lock,
- lock_flags);
+ spin_lock(&cam->queue_lock);
list_move_tail(&(*f)->frame,
&cam->outqueue);
if (!list_empty(&cam->inqueue))
@@ -606,13 +623,11 @@
frame );
else
(*f) = NULL;
- spin_unlock_irqrestore(&cam->queue_lock
- , lock_flags);
+ spin_unlock(&cam->queue_lock);
memcpy(cam->sysfs.frame_header,
- cam->sof_header,
- sizeof(sn9c102_sof_header_t));
- DBG(3, "Video frame captured: "
- "%lu bytes", (unsigned long)(b))
+ cam->sof_header, soflen);
+ DBG(3, "Video frame captured: %lu "
+ "bytes", (unsigned long)(b));
if (!(*f))
goto resubmit_urb;
@@ -621,18 +636,19 @@
(*f)->state = F_ERROR;
DBG(3, "Not expected EOF after %lu "
"bytes of image data",
- (unsigned long)((*f)->buf.bytesused))
+ (unsigned long)
+ ((*f)->buf.bytesused));
}
if (sof) /* (1) */
goto start_of_frame;
} else if (eof) {
- DBG(3, "EOF without SOF")
+ DBG(3, "EOF without SOF");
continue;
} else {
- PDBGG("Ignoring pointless isochronous frame")
+ PDBGG("Ignoring pointless isochronous frame");
continue;
}
@@ -642,7 +658,7 @@
(*f)->buf.bytesused = 0;
len -= (sof - pos);
pos = sof;
- DBG(3, "SOF detected: new video frame")
+ DBG(3, "SOF detected: new video frame");
if (len)
goto redo;
@@ -653,12 +669,13 @@
else {
if (cam->sensor->pix_format.pixelformat ==
V4L2_PIX_FMT_SN9C10X) {
- eof = sof-sizeof(sn9c102_sof_header_t);
+ eof = sof - soflen;
goto end_of_frame;
} else {
DBG(3, "SOF before expected EOF after "
"%lu bytes of image data",
- (unsigned long)((*f)->buf.bytesused))
+ (unsigned long)
+ ((*f)->buf.bytesused));
goto start_of_frame;
}
}
@@ -670,7 +687,7 @@
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0 && err != -EPERM) {
cam->state |= DEV_MISCONFIGURED;
- DBG(1, "usb_submit_urb() failed")
+ DBG(1, "usb_submit_urb() failed");
}
wake_up_interruptible(&cam->wait_frame);
@@ -681,18 +698,22 @@
{
struct usb_device *udev = cam->usbdev;
struct urb* urb;
- const unsigned int wMaxPacketSize[] = {0, 128, 256, 384, 512,
- 680, 800, 900, 1023};
- const unsigned int psz = wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
+ const unsigned int sn9c102_wMaxPacketSize[] = {0, 128, 256, 384, 512,
+ 680, 800, 900, 1023};
+ const unsigned int sn9c103_wMaxPacketSize[] = {0, 128, 256, 384, 512,
+ 680, 800, 900, 1003};
+ const unsigned int psz = (cam->bridge == BRIDGE_SN9C103) ?
+ sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] :
+ sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
s8 i, j;
int err = 0;
for (i = 0; i < SN9C102_URBS; i++) {
- cam->transfer_buffer[i] = kmalloc(SN9C102_ISO_PACKETS * psz,
+ cam->transfer_buffer[i] = kzalloc(SN9C102_ISO_PACKETS * psz,
GFP_KERNEL);
if (!cam->transfer_buffer[i]) {
err = -ENOMEM;
- DBG(1, "Not enough memory")
+ DBG(1, "Not enough memory");
goto free_buffers;
}
}
@@ -702,7 +723,7 @@
cam->urb[i] = urb;
if (!urb) {
err = -ENOMEM;
- DBG(1, "usb_alloc_urb() failed")
+ DBG(1, "usb_alloc_urb() failed");
goto free_urbs;
}
urb->dev = udev;
@@ -725,14 +746,14 @@
err = sn9c102_write_reg(cam, cam->reg[0x01] | 0x04, 0x01);
if (err) {
err = -EIO;
- DBG(1, "I/O hardware error")
+ DBG(1, "I/O hardware error");
goto free_urbs;
}
}
err = usb_set_interface(udev, 0, SN9C102_ALTERNATE_SETTING);
if (err) {
- DBG(1, "usb_set_interface() failed")
+ DBG(1, "usb_set_interface() failed");
goto free_urbs;
}
@@ -743,7 +764,7 @@
if (err) {
for (j = i-1; j >= 0; j--)
usb_kill_urb(cam->urb[j]);
- DBG(1, "usb_submit_urb() failed, error %d", err)
+ DBG(1, "usb_submit_urb() failed, error %d", err);
goto free_urbs;
}
}
@@ -779,7 +800,7 @@
err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
if (err)
- DBG(3, "usb_set_interface() failed")
+ DBG(3, "usb_set_interface() failed");
return err;
}
@@ -799,7 +820,7 @@
else if (err) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "The camera is misconfigured. To use it, close and "
- "open /dev/video%d again.", cam->v4ldev->minor)
+ "open /dev/video%d again.", cam->v4ldev->minor);
return err;
}
@@ -808,6 +829,7 @@
/*****************************************************************************/
+#ifdef CONFIG_VIDEO_ADV_DEBUG
static u8 sn9c102_strtou8(const char* buff, size_t len, ssize_t* count)
{
char str[5];
@@ -885,8 +907,8 @@
cam->sysfs.reg = index;
- DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg)
- DBG(3, "Written bytes: %zd", count)
+ DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg);
+ DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -916,7 +938,7 @@
count = sprintf(buf, "%d\n", val);
- DBG(3, "Read bytes: %zd", count)
+ DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -954,8 +976,8 @@
}
DBG(2, "Written SN9C10X reg. 0x%02X, val. 0x%02X",
- cam->sysfs.reg, value)
- DBG(3, "Written bytes: %zd", count)
+ cam->sysfs.reg, value);
+ DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -979,7 +1001,7 @@
count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg);
- DBG(3, "Read bytes: %zd", count)
+ DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -1011,8 +1033,8 @@
cam->sysfs.i2c_reg = index;
- DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg)
- DBG(3, "Written bytes: %zd", count)
+ DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
+ DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -1047,7 +1069,7 @@
count = sprintf(buf, "%d\n", val);
- DBG(3, "Read bytes: %zd", count)
+ DBG(3, "Read bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -1090,8 +1112,8 @@
}
DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X",
- cam->sysfs.i2c_reg, value)
- DBG(3, "Written bytes: %zd", count)
+ cam->sysfs.i2c_reg, value);
+ DBG(3, "Written bytes: %zd", count);
up(&sn9c102_sysfs_lock);
@@ -1193,7 +1215,7 @@
count = sizeof(cam->sysfs.frame_header);
memcpy(buf, cam->sysfs.frame_header, count);
- DBG(3, "Frame header, read bytes: %zd", count)
+ DBG(3, "Frame header, read bytes: %zd", count);
return count;
}
@@ -1227,11 +1249,12 @@
video_device_create_file(v4ldev, &class_device_attr_blue);
video_device_create_file(v4ldev, &class_device_attr_red);
}
- if (cam->sensor->sysfs_ops) {
+ if (cam->sensor && cam->sensor->sysfs_ops) {
video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
video_device_create_file(v4ldev, &class_device_attr_i2c_val);
}
}
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
/*****************************************************************************/
@@ -1281,7 +1304,7 @@
if (err)
return -EIO;
- PDBGG("Scaling factor: %u", scale)
+ PDBGG("Scaling factor: %u", scale);
return 0;
}
@@ -1304,7 +1327,7 @@
return -EIO;
PDBGG("h_start, v_start, h_size, v_size, ho_size, vo_size "
- "%u %u %u %u", h_start, v_start, h_size, v_size)
+ "%u %u %u %u", h_start, v_start, h_size, v_size);
return 0;
}
@@ -1336,7 +1359,7 @@
if (s->init) {
err = s->init(cam);
if (err) {
- DBG(3, "Sensor initialization failed")
+ DBG(3, "Sensor initialization failed");
return err;
}
}
@@ -1353,13 +1376,13 @@
if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
DBG(3, "Compressed video format is active, quality %d",
- cam->compression.quality)
+ cam->compression.quality);
else
- DBG(3, "Uncompressed video format is active")
+ DBG(3, "Uncompressed video format is active");
if (s->set_crop)
if ((err = s->set_crop(cam, rect))) {
- DBG(3, "set_crop() failed")
+ DBG(3, "set_crop() failed");
return err;
}
@@ -1372,11 +1395,11 @@
err = s->set_ctrl(cam, &ctrl);
if (err) {
DBG(3, "Set %s control failed",
- s->qctrl[i].name)
+ s->qctrl[i].name);
return err;
}
DBG(3, "Image sensor supports '%s' control",
- s->qctrl[i].name)
+ s->qctrl[i].name);
}
}
@@ -1392,7 +1415,7 @@
cam->state |= DEV_INITIALIZED;
}
- DBG(2, "Initialization succeeded")
+ DBG(2, "Initialization succeeded");
return 0;
}
@@ -1401,7 +1424,7 @@
{
down(&sn9c102_sysfs_lock);
- DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor)
+ DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
@@ -1432,7 +1455,7 @@
}
if (cam->users) {
- DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor)
+ DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
if ((filp->f_flags & O_NONBLOCK) ||
(filp->f_flags & O_NDELAY)) {
err = -EWOULDBLOCK;
@@ -1458,7 +1481,7 @@
err = sn9c102_init(cam);
if (err) {
DBG(1, "Initialization failed again. "
- "I will retry on next open().")
+ "I will retry on next open().");
goto out;
}
cam->state &= ~DEV_MISCONFIGURED;
@@ -1475,7 +1498,7 @@
cam->frame_count = 0;
sn9c102_empty_framequeues(cam);
- DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor)
+ DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
out:
up(&cam->dev_sem);
@@ -1504,7 +1527,7 @@
cam->users--;
wake_up_interruptible_nr(&cam->open, 1);
- DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor)
+ DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
up(&cam->dev_sem);
@@ -1524,32 +1547,38 @@
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present")
+ DBG(1, "Device not present");
up(&cam->fileop_sem);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it again.")
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
up(&cam->fileop_sem);
return -EIO;
}
if (cam->io == IO_MMAP) {
DBG(3, "Close and open the device again to choose "
- "the read method")
+ "the read method");
up(&cam->fileop_sem);
return -EINVAL;
}
if (cam->io == IO_NONE) {
if (!sn9c102_request_buffers(cam,cam->nreadbuffers, IO_READ)) {
- DBG(1, "read() failed, not enough memory")
+ DBG(1, "read() failed, not enough memory");
up(&cam->fileop_sem);
return -ENOMEM;
}
cam->io = IO_READ;
cam->stream = STREAM_ON;
+ }
+
+ if (list_empty(&cam->inqueue)) {
+ if (!list_empty(&cam->outqueue))
+ sn9c102_empty_framequeues(cam);
sn9c102_queue_unusedframes(cam);
}
@@ -1584,6 +1613,16 @@
f = list_entry(cam->outqueue.prev, struct sn9c102_frame_t, frame);
+ if (count > f->buf.bytesused)
+ count = f->buf.bytesused;
+
+ if (copy_to_user(buf, f->bufmem, count)) {
+ err = -EFAULT;
+ goto exit;
+ }
+ *f_pos += count;
+
+exit:
spin_lock_irqsave(&cam->queue_lock, lock_flags);
list_for_each_entry(i, &cam->outqueue, frame)
i->state = F_UNUSED;
@@ -1592,16 +1631,8 @@
sn9c102_queue_unusedframes(cam);
- if (count > f->buf.bytesused)
- count = f->buf.bytesused;
-
- if (copy_to_user(buf, f->bufmem, count)) {
- up(&cam->fileop_sem);
- return -EFAULT;
- }
- *f_pos += count;
-
- PDBGG("Frame #%lu, bytes read: %zu", (unsigned long)f->buf.index,count)
+ PDBGG("Frame #%lu, bytes read: %zu",
+ (unsigned long)f->buf.index, count);
up(&cam->fileop_sem);
@@ -1612,33 +1643,42 @@
static unsigned int sn9c102_poll(struct file *filp, poll_table *wait)
{
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+ struct sn9c102_frame_t* f;
+ unsigned long lock_flags;
unsigned int mask = 0;
if (down_interruptible(&cam->fileop_sem))
return POLLERR;
if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present")
+ DBG(1, "Device not present");
goto error;
}
if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it again.")
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
goto error;
}
if (cam->io == IO_NONE) {
if (!sn9c102_request_buffers(cam, cam->nreadbuffers,
IO_READ)) {
- DBG(1, "poll() failed, not enough memory")
+ DBG(1, "poll() failed, not enough memory");
goto error;
}
cam->io = IO_READ;
cam->stream = STREAM_ON;
}
- if (cam->io == IO_READ)
+ if (cam->io == IO_READ) {
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_for_each_entry(f, &cam->outqueue, frame)
+ f->state = F_UNUSED;
+ INIT_LIST_HEAD(&cam->outqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
sn9c102_queue_unusedframes(cam);
+ }
poll_wait(filp, &cam->wait_frame, wait);
@@ -1680,22 +1720,22 @@
{
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
unsigned long size = vma->vm_end - vma->vm_start,
- start = vma->vm_start,
- pos,
- page;
+ start = vma->vm_start;
+ void *pos;
u32 i;
if (down_interruptible(&cam->fileop_sem))
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present")
+ DBG(1, "Device not present");
up(&cam->fileop_sem);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it again.")
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
up(&cam->fileop_sem);
return -EIO;
}
@@ -1715,15 +1755,12 @@
return -EINVAL;
}
- /* VM_IO is eventually going to replace PageReserved altogether */
vma->vm_flags |= VM_IO;
- vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */
+ vma->vm_flags |= VM_RESERVED;
- pos = (unsigned long)cam->frame[i].bufmem;
+ pos = cam->frame[i].bufmem;
while (size > 0) { /* size is page-aligned */
- page = vmalloc_to_pfn((void *)pos);
- if (remap_pfn_range(vma, start, page, PAGE_SIZE,
- vma->vm_page_prot)) {
+ if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
up(&cam->fileop_sem);
return -EAGAIN;
}
@@ -1742,6 +1779,783 @@
return 0;
}
+/*****************************************************************************/
+
+static int
+sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_capability cap = {
+ .driver = "sn9c102",
+ .version = SN9C102_MODULE_VERSION_CODE,
+ .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING,
+ };
+
+ strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+ if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+ strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+ sizeof(cap.bus_info));
+
+ if (copy_to_user(arg, &cap, sizeof(cap)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_input i;
+
+ if (copy_from_user(&i, arg, sizeof(i)))
+ return -EFAULT;
+
+ if (i.index)
+ return -EINVAL;
+
+ memset(&i, 0, sizeof(i));
+ strcpy(i.name, "Camera");
+
+ if (copy_to_user(arg, &i, sizeof(i)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_gs_input(struct sn9c102_device* cam, void __user * arg)
+{
+ int index;
+
+ if (copy_from_user(&index, arg, sizeof(index)))
+ return -EFAULT;
+
+ if (index != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_query_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_queryctrl qc;
+ u8 i;
+
+ if (copy_from_user(&qc, arg, sizeof(qc)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (qc.id && qc.id == s->qctrl[i].id) {
+ memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+ if (copy_to_user(arg, &qc, sizeof(qc)))
+ return -EFAULT;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
+static int
+sn9c102_vidioc_g_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ int err = 0;
+ u8 i;
+
+ if (!s->get_ctrl && !s->set_ctrl)
+ return -EINVAL;
+
+ if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+ return -EFAULT;
+
+ if (!s->get_ctrl) {
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (ctrl.id && ctrl.id == s->qctrl[i].id) {
+ ctrl.value = s->_qctrl[i].default_value;
+ goto exit;
+ }
+ return -EINVAL;
+ } else
+ err = s->get_ctrl(cam, &ctrl);
+
+exit:
+ if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+ return -EFAULT;
+
+ return err;
+}
+
+
+static int
+sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_control ctrl;
+ u8 i;
+ int err = 0;
+
+ if (!s->set_ctrl)
+ return -EINVAL;
+
+ if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+ return -EFAULT;
+
+ for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+ if (ctrl.id == s->qctrl[i].id) {
+ if (ctrl.value < s->qctrl[i].minimum ||
+ ctrl.value > s->qctrl[i].maximum)
+ return -ERANGE;
+ ctrl.value -= ctrl.value % s->qctrl[i].step;
+ break;
+ }
+
+ if ((err = s->set_ctrl(cam, &ctrl)))
+ return err;
+
+ s->_qctrl[i].default_value = ctrl.value;
+
+ PDBGG("VIDIOC_S_CTRL: id %lu, value %lu",
+ (unsigned long)ctrl.id, (unsigned long)ctrl.value);
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_cropcap(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
+
+ cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ cc->pixelaspect.numerator = 1;
+ cc->pixelaspect.denominator = 1;
+
+ if (copy_to_user(arg, cc, sizeof(*cc)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_crop(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_crop crop = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ };
+
+ memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+ if (copy_to_user(arg, &crop, sizeof(crop)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_crop crop;
+ struct v4l2_rect* rect;
+ struct v4l2_rect* bounds = &(s->cropcap.bounds);
+ struct v4l2_pix_format* pix_format = &(s->pix_format);
+ u8 scale;
+ const enum sn9c102_stream_state stream = cam->stream;
+ const u32 nbuffers = cam->nbuffers;
+ u32 i;
+ int err = 0;
+
+ if (copy_from_user(&crop, arg, sizeof(crop)))
+ return -EFAULT;
+
+ rect = &(crop.c);
+
+ if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (cam->module_param.force_munmap)
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_S_CROP failed. "
+ "Unmap the buffers first.");
+ return -EINVAL;
+ }
+
+ /* Preserve R,G or B origin */
+ rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
+ rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
+
+ if (rect->width < 16)
+ rect->width = 16;
+ if (rect->height < 16)
+ rect->height = 16;
+ if (rect->width > bounds->width)
+ rect->width = bounds->width;
+ if (rect->height > bounds->height)
+ rect->height = bounds->height;
+ if (rect->left < bounds->left)
+ rect->left = bounds->left;
+ if (rect->top < bounds->top)
+ rect->top = bounds->top;
+ if (rect->left + rect->width > bounds->left + bounds->width)
+ rect->left = bounds->left+bounds->width - rect->width;
+ if (rect->top + rect->height > bounds->top + bounds->height)
+ rect->top = bounds->top+bounds->height - rect->height;
+
+ rect->width &= ~15L;
+ rect->height &= ~15L;
+
+ if (SN9C102_PRESERVE_IMGSCALE) {
+ /* Calculate the actual scaling factor */
+ u32 a, b;
+ a = rect->width * rect->height;
+ b = pix_format->width * pix_format->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+ } else
+ scale = 1;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ if (copy_to_user(arg, &crop, sizeof(crop))) {
+ cam->stream = stream;
+ return -EFAULT;
+ }
+
+ if (cam->module_param.force_munmap || cam->io == IO_READ)
+ sn9c102_release_buffers(cam);
+
+ err = sn9c102_set_crop(cam, rect);
+ if (s->set_crop)
+ err += s->set_crop(cam, rect);
+ err += sn9c102_set_scale(cam, scale);
+
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ s->pix_format.width = rect->width/scale;
+ s->pix_format.height = rect->height/scale;
+ memcpy(&(s->_rect), rect, sizeof(*rect));
+
+ if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+ nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -ENOMEM;
+ }
+
+ if (cam->io == IO_READ)
+ sn9c102_empty_framequeues(cam);
+ else if (cam->module_param.force_munmap)
+ sn9c102_requeue_outqueue(cam);
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_enum_fmt(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_fmtdesc fmtd;
+
+ if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+ return -EFAULT;
+
+ if (fmtd.index == 0) {
+ strcpy(fmtd.description, "bayer rgb");
+ fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
+ } else if (fmtd.index == 1) {
+ strcpy(fmtd.description, "compressed");
+ fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X;
+ fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+ } else
+ return -EINVAL;
+
+ fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+ if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_fmt(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_format format;
+ struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
+
+ if (copy_from_user(&format, arg, sizeof(format)))
+ return -EFAULT;
+
+ if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
+ ? 0 : (pfmt->width * pfmt->priv) / 8;
+ pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+ pfmt->field = V4L2_FIELD_NONE;
+ memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+ if (copy_to_user(arg, &format, sizeof(format)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
+ void __user * arg)
+{
+ struct sn9c102_sensor* s = cam->sensor;
+ struct v4l2_format format;
+ struct v4l2_pix_format* pix;
+ struct v4l2_pix_format* pfmt = &(s->pix_format);
+ struct v4l2_rect* bounds = &(s->cropcap.bounds);
+ struct v4l2_rect rect;
+ u8 scale;
+ const enum sn9c102_stream_state stream = cam->stream;
+ const u32 nbuffers = cam->nbuffers;
+ u32 i;
+ int err = 0;
+
+ if (copy_from_user(&format, arg, sizeof(format)))
+ return -EFAULT;
+
+ pix = &(format.fmt.pix);
+
+ if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memcpy(&rect, &(s->_rect), sizeof(rect));
+
+ { /* calculate the actual scaling factor */
+ u32 a, b;
+ a = rect.width * rect.height;
+ b = pix->width * pix->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+ }
+
+ rect.width = scale * pix->width;
+ rect.height = scale * pix->height;
+
+ if (rect.width < 16)
+ rect.width = 16;
+ if (rect.height < 16)
+ rect.height = 16;
+ if (rect.width > bounds->left + bounds->width - rect.left)
+ rect.width = bounds->left + bounds->width - rect.left;
+ if (rect.height > bounds->top + bounds->height - rect.top)
+ rect.height = bounds->top + bounds->height - rect.top;
+
+ rect.width &= ~15L;
+ rect.height &= ~15L;
+
+ { /* adjust the scaling factor */
+ u32 a, b;
+ a = rect.width * rect.height;
+ b = pix->width * pix->height;
+ scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+ }
+
+ pix->width = rect.width / scale;
+ pix->height = rect.height / scale;
+
+ if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X &&
+ pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+ pix->pixelformat = pfmt->pixelformat;
+ pix->priv = pfmt->priv; /* bpp */
+ pix->colorspace = pfmt->colorspace;
+ pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+ ? 0 : (pix->width * pix->priv) / 8;
+ pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+ pix->field = V4L2_FIELD_NONE;
+
+ if (cmd == VIDIOC_TRY_FMT) {
+ if (copy_to_user(arg, &format, sizeof(format)))
+ return -EFAULT;
+ return 0;
+ }
+
+ if (cam->module_param.force_munmap)
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_S_FMT failed. Unmap the "
+ "buffers first.");
+ return -EINVAL;
+ }
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ if (copy_to_user(arg, &format, sizeof(format))) {
+ cam->stream = stream;
+ return -EFAULT;
+ }
+
+ if (cam->module_param.force_munmap || cam->io == IO_READ)
+ sn9c102_release_buffers(cam);
+
+ err += sn9c102_set_pix_format(cam, pix);
+ err += sn9c102_set_crop(cam, &rect);
+ if (s->set_pix_format)
+ err += s->set_pix_format(cam, pix);
+ if (s->set_crop)
+ err += s->set_crop(cam, &rect);
+ err += sn9c102_set_scale(cam, scale);
+
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ memcpy(pfmt, pix, sizeof(*pix));
+ memcpy(&(s->_rect), &rect, sizeof(rect));
+
+ if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+ nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+ "use the camera, close and open /dev/video%d again.",
+ cam->v4ldev->minor);
+ return -ENOMEM;
+ }
+
+ if (cam->io == IO_READ)
+ sn9c102_empty_framequeues(cam);
+ else if (cam->module_param.force_munmap)
+ sn9c102_requeue_outqueue(cam);
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_jpegcomp(struct sn9c102_device* cam, void __user * arg)
+{
+ if (copy_to_user(arg, &cam->compression,
+ sizeof(cam->compression)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_jpegcompression jc;
+ const enum sn9c102_stream_state stream = cam->stream;
+ int err = 0;
+
+ if (copy_from_user(&jc, arg, sizeof(jc)))
+ return -EFAULT;
+
+ if (jc.quality != 0 && jc.quality != 1)
+ return -EINVAL;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ err += sn9c102_set_compression(cam, &jc);
+ if (err) { /* atomic, no rollback in ioctl() */
+ cam->state |= DEV_MISCONFIGURED;
+ DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+ "problems. To use the camera, close and open "
+ "/dev/video%d again.", cam->v4ldev->minor);
+ return -EIO;
+ }
+
+ cam->compression.quality = jc.quality;
+
+ cam->stream = stream;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_reqbufs(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_requestbuffers rb;
+ u32 i;
+ int err;
+
+ if (copy_from_user(&rb, arg, sizeof(rb)))
+ return -EFAULT;
+
+ if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ rb.memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+
+ if (cam->io == IO_READ) {
+ DBG(3, "Close and open the device again to choose the mmap "
+ "I/O method");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < cam->nbuffers; i++)
+ if (cam->frame[i].vma_use_count) {
+ DBG(3, "VIDIOC_REQBUFS failed. Previous buffers are "
+ "still mapped.");
+ return -EINVAL;
+ }
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ sn9c102_empty_framequeues(cam);
+
+ sn9c102_release_buffers(cam);
+ if (rb.count)
+ rb.count = sn9c102_request_buffers(cam, rb.count, IO_MMAP);
+
+ if (copy_to_user(arg, &rb, sizeof(rb))) {
+ sn9c102_release_buffers(cam);
+ cam->io = IO_NONE;
+ return -EFAULT;
+ }
+
+ cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_querybuf(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_buffer b;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ b.index >= cam->nbuffers || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+ if (cam->frame[b.index].vma_use_count)
+ b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+ if (cam->frame[b.index].state == F_DONE)
+ b.flags |= V4L2_BUF_FLAG_DONE;
+ else if (cam->frame[b.index].state != F_UNUSED)
+ b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+ if (copy_to_user(arg, &b, sizeof(b)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_qbuf(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_buffer b;
+ unsigned long lock_flags;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ b.index >= cam->nbuffers || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (cam->frame[b.index].state != F_UNUSED)
+ return -EINVAL;
+
+ cam->frame[b.index].state = F_QUEUED;
+
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
+ void __user * arg)
+{
+ struct v4l2_buffer b;
+ struct sn9c102_frame_t *f;
+ unsigned long lock_flags;
+ int err = 0;
+
+ if (copy_from_user(&b, arg, sizeof(b)))
+ return -EFAULT;
+
+ if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (list_empty(&cam->outqueue)) {
+ if (cam->stream == STREAM_OFF)
+ return -EINVAL;
+ if (filp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ err = wait_event_interruptible
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED) );
+ if (err)
+ return err;
+ if (cam->state & DEV_DISCONNECTED)
+ return -ENODEV;
+ if (cam->state & DEV_MISCONFIGURED)
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&cam->queue_lock, lock_flags);
+ f = list_entry(cam->outqueue.next, struct sn9c102_frame_t, frame);
+ list_del(cam->outqueue.next);
+ spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+ f->state = F_UNUSED;
+
+ memcpy(&b, &f->buf, sizeof(b));
+ if (f->vma_use_count)
+ b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+ if (copy_to_user(arg, &b, sizeof(b)))
+ return -EFAULT;
+
+ PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_streamon(struct sn9c102_device* cam, void __user * arg)
+{
+ int type;
+
+ if (copy_from_user(&type, arg, sizeof(type)))
+ return -EFAULT;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (list_empty(&cam->inqueue))
+ return -EINVAL;
+
+ cam->stream = STREAM_ON;
+
+ DBG(3, "Stream on");
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_streamoff(struct sn9c102_device* cam, void __user * arg)
+{
+ int type, err;
+
+ if (copy_from_user(&type, arg, sizeof(type)))
+ return -EFAULT;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+ return -EINVAL;
+
+ if (cam->stream == STREAM_ON)
+ if ((err = sn9c102_stream_interrupt(cam)))
+ return err;
+
+ sn9c102_empty_framequeues(cam);
+
+ DBG(3, "Stream off");
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_parm(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_streamparm sp;
+
+ if (copy_from_user(&sp, arg, sizeof(sp)))
+ return -EFAULT;
+
+ if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ sp.parm.capture.extendedmode = 0;
+ sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+ if (copy_to_user(arg, &sp, sizeof(sp)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_parm(struct sn9c102_device* cam, void __user * arg)
+{
+ struct v4l2_streamparm sp;
+
+ if (copy_from_user(&sp, arg, sizeof(sp)))
+ return -EFAULT;
+
+ if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ sp.parm.capture.extendedmode = 0;
+
+ if (sp.parm.capture.readbuffers == 0)
+ sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+ if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES)
+ sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES;
+
+ if (copy_to_user(arg, &sp, sizeof(sp)))
+ return -EFAULT;
+
+ cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+ return 0;
+}
+
static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
unsigned int cmd, void __user * arg)
@@ -1751,729 +2565,75 @@
switch (cmd) {
case VIDIOC_QUERYCAP:
- {
- struct v4l2_capability cap = {
- .driver = "sn9c102",
- .version = SN9C102_MODULE_VERSION_CODE,
- .capabilities = V4L2_CAP_VIDEO_CAPTURE |
- V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
- };
-
- strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
- if (usb_make_path(cam->usbdev, cap.bus_info,
- sizeof(cap.bus_info)) < 0)
- strlcpy(cap.bus_info, cam->dev.bus_id,
- sizeof(cap.bus_info));
-
- if (copy_to_user(arg, &cap, sizeof(cap)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_querycap(cam, arg);
case VIDIOC_ENUMINPUT:
- {
- struct v4l2_input i;
-
- if (copy_from_user(&i, arg, sizeof(i)))
- return -EFAULT;
-
- if (i.index)
- return -EINVAL;
-
- memset(&i, 0, sizeof(i));
- strcpy(i.name, "USB");
-
- if (copy_to_user(arg, &i, sizeof(i)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_enuminput(cam, arg);
case VIDIOC_G_INPUT:
case VIDIOC_S_INPUT:
- {
- int index;
-
- if (copy_from_user(&index, arg, sizeof(index)))
- return -EFAULT;
-
- if (index != 0)
- return -EINVAL;
-
- return 0;
- }
+ return sn9c102_vidioc_gs_input(cam, arg);
case VIDIOC_QUERYCTRL:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_queryctrl qc;
- u8 i;
-
- if (copy_from_user(&qc, arg, sizeof(qc)))
- return -EFAULT;
-
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (qc.id && qc.id == s->qctrl[i].id) {
- memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
- if (copy_to_user(arg, &qc, sizeof(qc)))
- return -EFAULT;
- return 0;
- }
-
- return -EINVAL;
- }
+ return sn9c102_vidioc_query_ctrl(cam, arg);
case VIDIOC_G_CTRL:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_control ctrl;
- int err = 0;
-
- if (!s->get_ctrl)
- return -EINVAL;
-
- if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
- return -EFAULT;
-
- err = s->get_ctrl(cam, &ctrl);
-
- if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
- return -EFAULT;
-
- return err;
- }
+ return sn9c102_vidioc_g_ctrl(cam, arg);
case VIDIOC_S_CTRL_OLD:
case VIDIOC_S_CTRL:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_control ctrl;
- u8 i;
- int err = 0;
+ return sn9c102_vidioc_s_ctrl(cam, arg);
- if (!s->set_ctrl)
- return -EINVAL;
-
- if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
- return -EFAULT;
-
- for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
- if (ctrl.id == s->qctrl[i].id) {
- if (ctrl.value < s->qctrl[i].minimum ||
- ctrl.value > s->qctrl[i].maximum)
- return -ERANGE;
- ctrl.value -= ctrl.value % s->qctrl[i].step;
- break;
- }
-
- if ((err = s->set_ctrl(cam, &ctrl)))
- return err;
-
- s->_qctrl[i].default_value = ctrl.value;
-
- PDBGG("VIDIOC_S_CTRL: id %lu, value %lu",
- (unsigned long)ctrl.id, (unsigned long)ctrl.value)
-
- return 0;
- }
-
+ case VIDIOC_CROPCAP_OLD:
case VIDIOC_CROPCAP:
- {
- struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
-
- cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- cc->pixelaspect.numerator = 1;
- cc->pixelaspect.denominator = 1;
-
- if (copy_to_user(arg, cc, sizeof(*cc)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_cropcap(cam, arg);
case VIDIOC_G_CROP:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_crop crop = {
- .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
- };
-
- memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
-
- if (copy_to_user(arg, &crop, sizeof(crop)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_g_crop(cam, arg);
case VIDIOC_S_CROP:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_crop crop;
- struct v4l2_rect* rect;
- struct v4l2_rect* bounds = &(s->cropcap.bounds);
- struct v4l2_pix_format* pix_format = &(s->pix_format);
- u8 scale;
- const enum sn9c102_stream_state stream = cam->stream;
- const u32 nbuffers = cam->nbuffers;
- u32 i;
- int err = 0;
-
- if (copy_from_user(&crop, arg, sizeof(crop)))
- return -EFAULT;
-
- rect = &(crop.c);
-
- if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- if (cam->module_param.force_munmap)
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_S_CROP failed. "
- "Unmap the buffers first.")
- return -EINVAL;
- }
-
- /* Preserve R,G or B origin */
- rect->left = (s->_rect.left & 1L) ?
- rect->left | 1L : rect->left & ~1L;
- rect->top = (s->_rect.top & 1L) ?
- rect->top | 1L : rect->top & ~1L;
-
- if (rect->width < 16)
- rect->width = 16;
- if (rect->height < 16)
- rect->height = 16;
- if (rect->width > bounds->width)
- rect->width = bounds->width;
- if (rect->height > bounds->height)
- rect->height = bounds->height;
- if (rect->left < bounds->left)
- rect->left = bounds->left;
- if (rect->top < bounds->top)
- rect->top = bounds->top;
- if (rect->left + rect->width > bounds->left + bounds->width)
- rect->left = bounds->left+bounds->width - rect->width;
- if (rect->top + rect->height > bounds->top + bounds->height)
- rect->top = bounds->top+bounds->height - rect->height;
-
- rect->width &= ~15L;
- rect->height &= ~15L;
-
- if (SN9C102_PRESERVE_IMGSCALE) {
- /* Calculate the actual scaling factor */
- u32 a, b;
- a = rect->width * rect->height;
- b = pix_format->width * pix_format->height;
- scale = b ? (u8)((a / b) < 4 ? 1 :
- ((a / b) < 16 ? 2 : 4)) : 1;
- } else
- scale = 1;
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- if (copy_to_user(arg, &crop, sizeof(crop))) {
- cam->stream = stream;
- return -EFAULT;
- }
-
- if (cam->module_param.force_munmap || cam->io == IO_READ)
- sn9c102_release_buffers(cam);
-
- err = sn9c102_set_crop(cam, rect);
- if (s->set_crop)
- err += s->set_crop(cam, rect);
- err += sn9c102_set_scale(cam, scale);
-
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_CROP failed because of hardware "
- "problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -EIO;
- }
-
- s->pix_format.width = rect->width/scale;
- s->pix_format.height = rect->height/scale;
- memcpy(&(s->_rect), rect, sizeof(*rect));
-
- if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
- nbuffers != sn9c102_request_buffers(cam, nbuffers,
- cam->io)) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_CROP failed because of not enough "
- "memory. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -ENOMEM;
- }
-
- cam->stream = stream;
-
- return 0;
- }
+ return sn9c102_vidioc_s_crop(cam, arg);
case VIDIOC_ENUM_FMT:
- {
- struct v4l2_fmtdesc fmtd;
-
- if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
- return -EFAULT;
-
- if (fmtd.index == 0) {
- strcpy(fmtd.description, "bayer rgb");
- fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
- } else if (fmtd.index == 1) {
- strcpy(fmtd.description, "compressed");
- fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X;
- fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
- } else
- return -EINVAL;
-
- fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
-
- if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_enum_fmt(cam, arg);
case VIDIOC_G_FMT:
- {
- struct v4l2_format format;
- struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
-
- if (copy_from_user(&format, arg, sizeof(format)))
- return -EFAULT;
-
- if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
- ? 0 : (pfmt->width * pfmt->priv) / 8;
- pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
- pfmt->field = V4L2_FIELD_NONE;
- memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
-
- if (copy_to_user(arg, &format, sizeof(format)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_g_fmt(cam, arg);
case VIDIOC_TRY_FMT:
case VIDIOC_S_FMT:
- {
- struct sn9c102_sensor* s = cam->sensor;
- struct v4l2_format format;
- struct v4l2_pix_format* pix;
- struct v4l2_pix_format* pfmt = &(s->pix_format);
- struct v4l2_rect* bounds = &(s->cropcap.bounds);
- struct v4l2_rect rect;
- u8 scale;
- const enum sn9c102_stream_state stream = cam->stream;
- const u32 nbuffers = cam->nbuffers;
- u32 i;
- int err = 0;
-
- if (copy_from_user(&format, arg, sizeof(format)))
- return -EFAULT;
-
- pix = &(format.fmt.pix);
-
- if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- memcpy(&rect, &(s->_rect), sizeof(rect));
-
- { /* calculate the actual scaling factor */
- u32 a, b;
- a = rect.width * rect.height;
- b = pix->width * pix->height;
- scale = b ? (u8)((a / b) < 4 ? 1 :
- ((a / b) < 16 ? 2 : 4)) : 1;
- }
-
- rect.width = scale * pix->width;
- rect.height = scale * pix->height;
-
- if (rect.width < 16)
- rect.width = 16;
- if (rect.height < 16)
- rect.height = 16;
- if (rect.width > bounds->left + bounds->width - rect.left)
- rect.width = bounds->left + bounds->width - rect.left;
- if (rect.height > bounds->top + bounds->height - rect.top)
- rect.height = bounds->top + bounds->height - rect.top;
-
- rect.width &= ~15L;
- rect.height &= ~15L;
-
- { /* adjust the scaling factor */
- u32 a, b;
- a = rect.width * rect.height;
- b = pix->width * pix->height;
- scale = b ? (u8)((a / b) < 4 ? 1 :
- ((a / b) < 16 ? 2 : 4)) : 1;
- }
-
- pix->width = rect.width / scale;
- pix->height = rect.height / scale;
-
- if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X &&
- pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
- pix->pixelformat = pfmt->pixelformat;
- pix->priv = pfmt->priv; /* bpp */
- pix->colorspace = pfmt->colorspace;
- pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
- ? 0 : (pix->width * pix->priv) / 8;
- pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
- pix->field = V4L2_FIELD_NONE;
-
- if (cmd == VIDIOC_TRY_FMT) {
- if (copy_to_user(arg, &format, sizeof(format)))
- return -EFAULT;
- return 0;
- }
-
- if (cam->module_param.force_munmap)
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_S_FMT failed. "
- "Unmap the buffers first.")
- return -EINVAL;
- }
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- if (copy_to_user(arg, &format, sizeof(format))) {
- cam->stream = stream;
- return -EFAULT;
- }
-
- if (cam->module_param.force_munmap || cam->io == IO_READ)
- sn9c102_release_buffers(cam);
-
- err += sn9c102_set_pix_format(cam, pix);
- err += sn9c102_set_crop(cam, &rect);
- if (s->set_pix_format)
- err += s->set_pix_format(cam, pix);
- if (s->set_crop)
- err += s->set_crop(cam, &rect);
- err += sn9c102_set_scale(cam, scale);
-
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_FMT failed because of hardware "
- "problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -EIO;
- }
-
- memcpy(pfmt, pix, sizeof(*pix));
- memcpy(&(s->_rect), &rect, sizeof(rect));
-
- if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
- nbuffers != sn9c102_request_buffers(cam, nbuffers,
- cam->io)) {
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_FMT failed because of not enough "
- "memory. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -ENOMEM;
- }
-
- cam->stream = stream;
-
- return 0;
- }
+ return sn9c102_vidioc_try_s_fmt(cam, cmd, arg);
case VIDIOC_G_JPEGCOMP:
- {
- if (copy_to_user(arg, &cam->compression,
- sizeof(cam->compression)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_g_jpegcomp(cam, arg);
case VIDIOC_S_JPEGCOMP:
- {
- struct v4l2_jpegcompression jc;
- const enum sn9c102_stream_state stream = cam->stream;
- int err = 0;
-
- if (copy_from_user(&jc, arg, sizeof(jc)))
- return -EFAULT;
-
- if (jc.quality != 0 && jc.quality != 1)
- return -EINVAL;
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- err += sn9c102_set_compression(cam, &jc);
- if (err) { /* atomic, no rollback in ioctl() */
- cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
- "problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->minor)
- return -EIO;
- }
-
- cam->compression.quality = jc.quality;
-
- cam->stream = stream;
-
- return 0;
- }
+ return sn9c102_vidioc_s_jpegcomp(cam, arg);
case VIDIOC_REQBUFS:
- {
- struct v4l2_requestbuffers rb;
- u32 i;
- int err;
-
- if (copy_from_user(&rb, arg, sizeof(rb)))
- return -EFAULT;
-
- if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- rb.memory != V4L2_MEMORY_MMAP)
- return -EINVAL;
-
- if (cam->io == IO_READ) {
- DBG(3, "Close and open the device again to choose "
- "the mmap I/O method")
- return -EINVAL;
- }
-
- for (i = 0; i < cam->nbuffers; i++)
- if (cam->frame[i].vma_use_count) {
- DBG(3, "VIDIOC_REQBUFS failed. "
- "Previous buffers are still mapped.")
- return -EINVAL;
- }
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- sn9c102_empty_framequeues(cam);
-
- sn9c102_release_buffers(cam);
- if (rb.count)
- rb.count = sn9c102_request_buffers(cam, rb.count,
- IO_MMAP);
-
- if (copy_to_user(arg, &rb, sizeof(rb))) {
- sn9c102_release_buffers(cam);
- cam->io = IO_NONE;
- return -EFAULT;
- }
-
- cam->io = rb.count ? IO_MMAP : IO_NONE;
-
- return 0;
- }
+ return sn9c102_vidioc_reqbufs(cam, arg);
case VIDIOC_QUERYBUF:
- {
- struct v4l2_buffer b;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- b.index >= cam->nbuffers || cam->io != IO_MMAP)
- return -EINVAL;
-
- memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
-
- if (cam->frame[b.index].vma_use_count)
- b.flags |= V4L2_BUF_FLAG_MAPPED;
-
- if (cam->frame[b.index].state == F_DONE)
- b.flags |= V4L2_BUF_FLAG_DONE;
- else if (cam->frame[b.index].state != F_UNUSED)
- b.flags |= V4L2_BUF_FLAG_QUEUED;
-
- if (copy_to_user(arg, &b, sizeof(b)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_querybuf(cam, arg);
case VIDIOC_QBUF:
- {
- struct v4l2_buffer b;
- unsigned long lock_flags;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- b.index >= cam->nbuffers || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (cam->frame[b.index].state != F_UNUSED)
- return -EINVAL;
-
- cam->frame[b.index].state = F_QUEUED;
-
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- PDBGG("Frame #%lu queued", (unsigned long)b.index)
-
- return 0;
- }
+ return sn9c102_vidioc_qbuf(cam, arg);
case VIDIOC_DQBUF:
- {
- struct v4l2_buffer b;
- struct sn9c102_frame_t *f;
- unsigned long lock_flags;
- int err = 0;
-
- if (copy_from_user(&b, arg, sizeof(b)))
- return -EFAULT;
-
- if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
- return -EINVAL;
-
- if (list_empty(&cam->outqueue)) {
- if (cam->stream == STREAM_OFF)
- return -EINVAL;
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- err = wait_event_interruptible
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED) );
- if (err)
- return err;
- if (cam->state & DEV_DISCONNECTED)
- return -ENODEV;
- if (cam->state & DEV_MISCONFIGURED)
- return -EIO;
- }
-
- spin_lock_irqsave(&cam->queue_lock, lock_flags);
- f = list_entry(cam->outqueue.next, struct sn9c102_frame_t,
- frame);
- list_del(cam->outqueue.next);
- spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
- f->state = F_UNUSED;
-
- memcpy(&b, &f->buf, sizeof(b));
- if (f->vma_use_count)
- b.flags |= V4L2_BUF_FLAG_MAPPED;
-
- if (copy_to_user(arg, &b, sizeof(b)))
- return -EFAULT;
-
- PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index)
-
- return 0;
- }
+ return sn9c102_vidioc_dqbuf(cam, filp, arg);
case VIDIOC_STREAMON:
- {
- int type;
-
- if (copy_from_user(&type, arg, sizeof(type)))
- return -EFAULT;
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (list_empty(&cam->inqueue))
- return -EINVAL;
-
- cam->stream = STREAM_ON;
-
- DBG(3, "Stream on")
-
- return 0;
- }
+ return sn9c102_vidioc_streamon(cam, arg);
case VIDIOC_STREAMOFF:
- {
- int type, err;
-
- if (copy_from_user(&type, arg, sizeof(type)))
- return -EFAULT;
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
- return -EINVAL;
-
- if (cam->stream == STREAM_ON)
- if ((err = sn9c102_stream_interrupt(cam)))
- return err;
-
- sn9c102_empty_framequeues(cam);
-
- DBG(3, "Stream off")
-
- return 0;
- }
+ return sn9c102_vidioc_streamoff(cam, arg);
case VIDIOC_G_PARM:
- {
- struct v4l2_streamparm sp;
-
- if (copy_from_user(&sp, arg, sizeof(sp)))
- return -EFAULT;
-
- if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- sp.parm.capture.extendedmode = 0;
- sp.parm.capture.readbuffers = cam->nreadbuffers;
-
- if (copy_to_user(arg, &sp, sizeof(sp)))
- return -EFAULT;
-
- return 0;
- }
+ return sn9c102_vidioc_g_parm(cam, arg);
case VIDIOC_S_PARM_OLD:
case VIDIOC_S_PARM:
- {
- struct v4l2_streamparm sp;
-
- if (copy_from_user(&sp, arg, sizeof(sp)))
- return -EFAULT;
-
- if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- sp.parm.capture.extendedmode = 0;
-
- if (sp.parm.capture.readbuffers == 0)
- sp.parm.capture.readbuffers = cam->nreadbuffers;
-
- if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES)
- sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES;
-
- if (copy_to_user(arg, &sp, sizeof(sp)))
- return -EFAULT;
-
- cam->nreadbuffers = sp.parm.capture.readbuffers;
-
- return 0;
- }
+ return sn9c102_vidioc_s_parm(cam, arg);
case VIDIOC_G_STD:
case VIDIOC_S_STD:
@@ -2499,17 +2659,20 @@
return -ERESTARTSYS;
if (cam->state & DEV_DISCONNECTED) {
- DBG(1, "Device not present")
+ DBG(1, "Device not present");
up(&cam->fileop_sem);
return -ENODEV;
}
if (cam->state & DEV_MISCONFIGURED) {
- DBG(1, "The camera is misconfigured. Close and open it again.")
+ DBG(1, "The camera is misconfigured. Close and open it "
+ "again.");
up(&cam->fileop_sem);
return -EIO;
}
+ V4LDBG(3, "sn9c102", cmd);
+
err = sn9c102_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
up(&cam->fileop_sem);
@@ -2517,9 +2680,10 @@
return err;
}
+/*****************************************************************************/
static struct file_operations sn9c102_fops = {
- .owner = THIS_MODULE,
+ .owner = THIS_MODULE,
.open = sn9c102_open,
.release = sn9c102_release,
.ioctl = sn9c102_ioctl,
@@ -2538,36 +2702,22 @@
struct usb_device *udev = interface_to_usbdev(intf);
struct sn9c102_device* cam;
static unsigned int dev_nr = 0;
- unsigned int i, n;
+ unsigned int i;
int err = 0, r;
- n = ARRAY_SIZE(sn9c102_id_table);
- for (i = 0; i < n-1; i++)
- if (le16_to_cpu(udev->descriptor.idVendor) ==
- sn9c102_id_table[i].idVendor &&
- le16_to_cpu(udev->descriptor.idProduct) ==
- sn9c102_id_table[i].idProduct)
- break;
- if (i == n-1)
- return -ENODEV;
-
- if (!(cam = kmalloc(sizeof(struct sn9c102_device), GFP_KERNEL)))
+ if (!(cam = kzalloc(sizeof(struct sn9c102_device), GFP_KERNEL)))
return -ENOMEM;
- memset(cam, 0, sizeof(*cam));
cam->usbdev = udev;
- memcpy(&cam->dev, &udev->dev, sizeof(struct device));
-
- if (!(cam->control_buffer = kmalloc(8, GFP_KERNEL))) {
- DBG(1, "kmalloc() failed")
+ if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
+ DBG(1, "kmalloc() failed");
err = -ENOMEM;
goto fail;
}
- memset(cam->control_buffer, 0, 8);
if (!(cam->v4ldev = video_device_alloc())) {
- DBG(1, "video_device_alloc() failed")
+ DBG(1, "video_device_alloc() failed");
err = -ENOMEM;
goto fail;
}
@@ -2577,25 +2727,22 @@
r = sn9c102_read_reg(cam, 0x00);
if (r < 0 || r != 0x10) {
DBG(1, "Sorry, this is not a SN9C10x based camera "
- "(vid/pid 0x%04X/0x%04X)",
- sn9c102_id_table[i].idVendor,sn9c102_id_table[i].idProduct)
+ "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
err = -ENODEV;
goto fail;
}
- cam->bridge = (sn9c102_id_table[i].idProduct & 0xffc0) == 0x6080 ?
+ cam->bridge = (id->idProduct & 0xffc0) == 0x6080 ?
BRIDGE_SN9C103 : BRIDGE_SN9C102;
switch (cam->bridge) {
case BRIDGE_SN9C101:
case BRIDGE_SN9C102:
DBG(2, "SN9C10[12] PC Camera Controller detected "
- "(vid/pid 0x%04X/0x%04X)", sn9c102_id_table[i].idVendor,
- sn9c102_id_table[i].idProduct)
+ "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
break;
case BRIDGE_SN9C103:
DBG(2, "SN9C103 PC Camera Controller detected "
- "(vid/pid 0x%04X/0x%04X)", sn9c102_id_table[i].idVendor,
- sn9c102_id_table[i].idProduct)
+ "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
break;
}
@@ -2606,24 +2753,24 @@
}
if (!err && cam->sensor) {
- DBG(2, "%s image sensor detected", cam->sensor->name)
+ DBG(2, "%s image sensor detected", cam->sensor->name);
DBG(3, "Support for %s maintained by %s",
- cam->sensor->name, cam->sensor->maintainer)
+ cam->sensor->name, cam->sensor->maintainer);
} else {
- DBG(1, "No supported image sensor detected")
+ DBG(1, "No supported image sensor detected");
err = -ENODEV;
goto fail;
}
if (sn9c102_init(cam)) {
- DBG(1, "Initialization failed. I will retry on open().")
+ DBG(1, "Initialization failed. I will retry on open().");
cam->state |= DEV_MISCONFIGURED;
}
strcpy(cam->v4ldev->name, "SN9C10x PC Camera");
cam->v4ldev->owner = THIS_MODULE;
cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
- cam->v4ldev->hardware = VID_HARDWARE_SN9C102;
+ cam->v4ldev->hardware = 0;
cam->v4ldev->fops = &sn9c102_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
@@ -2634,23 +2781,25 @@
err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
video_nr[dev_nr]);
if (err) {
- DBG(1, "V4L2 device registration failed")
+ DBG(1, "V4L2 device registration failed");
if (err == -ENFILE && video_nr[dev_nr] == -1)
- DBG(1, "Free /dev/videoX node not found")
+ DBG(1, "Free /dev/videoX node not found");
video_nr[dev_nr] = -1;
dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
up(&cam->dev_sem);
goto fail;
}
- DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor)
+ DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
cam->module_param.force_munmap = force_munmap[dev_nr];
dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
sn9c102_create_sysfs(cam);
- DBG(2, "Optional device control through 'sysfs' interface ready")
+ DBG(2, "Optional device control through 'sysfs' interface ready");
+#endif
usb_set_intfdata(intf, cam);
@@ -2680,14 +2829,14 @@
down(&cam->dev_sem);
- DBG(2, "Disconnecting %s...", cam->v4ldev->name)
+ DBG(2, "Disconnecting %s...", cam->v4ldev->name);
wake_up_interruptible_all(&cam->open);
if (cam->users) {
DBG(2, "Device /dev/video%d is open! Deregistration and "
"memory deallocation are deferred on close.",
- cam->v4ldev->minor)
+ cam->v4ldev->minor);
cam->state |= DEV_MISCONFIGURED;
sn9c102_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
@@ -2720,11 +2869,11 @@
{
int err = 0;
- KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION)
- KDBG(3, SN9C102_MODULE_AUTHOR)
+ KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION);
+ KDBG(3, SN9C102_MODULE_AUTHOR);
if ((err = usb_register(&sn9c102_usb_driver)))
- KDBG(1, "usb_register() failed")
+ KDBG(1, "usb_register() failed");
return err;
}
diff --git a/drivers/usb/media/sn9c102_hv7131d.c b/drivers/usb/media/sn9c102_hv7131d.c
index 18070d5..46c12ec 100644
--- a/drivers/usb/media/sn9c102_hv7131d.c
+++ b/drivers/usb/media/sn9c102_hv7131d.c
@@ -2,7 +2,7 @@
* Plug-in for HV7131D image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/sn9c102_mi0343.c b/drivers/usb/media/sn9c102_mi0343.c
index 86676ab..d9aa7a6 100644
--- a/drivers/usb/media/sn9c102_mi0343.c
+++ b/drivers/usb/media/sn9c102_mi0343.c
@@ -2,7 +2,7 @@
* Plug-in for MI-0343 image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/sn9c102_ov7630.c b/drivers/usb/media/sn9c102_ov7630.c
index d27c5ae..4a36519 100644
--- a/drivers/usb/media/sn9c102_ov7630.c
+++ b/drivers/usb/media/sn9c102_ov7630.c
@@ -2,7 +2,7 @@
* Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2005-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
@@ -375,8 +375,10 @@
sn9c102_attach_sensor(cam, &ov7630);
- if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
- le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c)
+ if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c &&
+ le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602d &&
+ le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
+ le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x60b0)
return -ENODEV;
err += sn9c102_write_reg(cam, 0x01, 0x01);
diff --git a/drivers/usb/media/sn9c102_pas106b.c b/drivers/usb/media/sn9c102_pas106b.c
index 48e3ec3..b1dee78 100644
--- a/drivers/usb/media/sn9c102_pas106b.c
+++ b/drivers/usb/media/sn9c102_pas106b.c
@@ -2,7 +2,7 @@
* Plug-in for PAS106B image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/sn9c102_sensor.h b/drivers/usb/media/sn9c102_sensor.h
index a45166c..7d953b2 100644
--- a/drivers/usb/media/sn9c102_sensor.h
+++ b/drivers/usb/media/sn9c102_sensor.h
@@ -1,7 +1,7 @@
/***************************************************************************
* API for image sensors connected to the SN9C10x PC Camera Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
@@ -92,7 +92,18 @@
sn9c102_attach_sensor(struct sn9c102_device* cam,
struct sn9c102_sensor* sensor);
-/* Each SN9C10X camera has proper PID/VID identifiers. Add them here in case.*/
+/*
+ Each SN9C10x camera has proper PID/VID identifiers.
+ SN9C103 supports multiple interfaces, but we only handle the video class
+ interface.
+*/
+#define SN9C102_USB_DEVICE(vend, prod, intclass) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_CLASS, \
+ .idVendor = (vend), \
+ .idProduct = (prod), \
+ .bInterfaceClass = (intclass)
+
#define SN9C102_ID_TABLE \
static const struct usb_device_id sn9c102_id_table[] = { \
{ USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */ \
@@ -107,33 +118,34 @@
{ USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */ \
{ USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */ \
{ USB_DEVICE(0x0c45, 0x602d), }, \
+ { USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */ \
{ USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */ \
- { USB_DEVICE(0x0c45, 0x6080), }, \
- { USB_DEVICE(0x0c45, 0x6082), }, /* MI0343 and MI0360 */ \
- { USB_DEVICE(0x0c45, 0x6083), }, /* HV7131[D|E1] */ \
- { USB_DEVICE(0x0c45, 0x6088), }, \
- { USB_DEVICE(0x0c45, 0x608a), }, \
- { USB_DEVICE(0x0c45, 0x608b), }, \
- { USB_DEVICE(0x0c45, 0x608c), }, /* HV7131x */ \
- { USB_DEVICE(0x0c45, 0x608e), }, /* CIS-VF10 */ \
- { USB_DEVICE(0x0c45, 0x608f), }, /* OV7630 */ \
- { USB_DEVICE(0x0c45, 0x60a0), }, \
- { USB_DEVICE(0x0c45, 0x60a2), }, \
- { USB_DEVICE(0x0c45, 0x60a3), }, \
- { USB_DEVICE(0x0c45, 0x60a8), }, /* PAS106B */ \
- { USB_DEVICE(0x0c45, 0x60aa), }, /* TAS5130D1B */ \
- { USB_DEVICE(0x0c45, 0x60ab), }, /* TAS5110C1B */ \
- { USB_DEVICE(0x0c45, 0x60ac), }, \
- { USB_DEVICE(0x0c45, 0x60ae), }, \
- { USB_DEVICE(0x0c45, 0x60af), }, /* PAS202BCB */ \
- { USB_DEVICE(0x0c45, 0x60b0), }, \
- { USB_DEVICE(0x0c45, 0x60b2), }, \
- { USB_DEVICE(0x0c45, 0x60b3), }, \
- { USB_DEVICE(0x0c45, 0x60b8), }, \
- { USB_DEVICE(0x0c45, 0x60ba), }, \
- { USB_DEVICE(0x0c45, 0x60bb), }, \
- { USB_DEVICE(0x0c45, 0x60bc), }, \
- { USB_DEVICE(0x0c45, 0x60be), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131x */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */ \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), }, \
+ { SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), }, \
{ } \
};
@@ -177,16 +189,18 @@
extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address);
/* I/O on registers in the bridge. Could be used by the sensor methods too */
+extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index);
extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index);
extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index);
/*
NOTE: there are no exported debugging functions. To uniform the output you
must use the dev_info()/dev_warn()/dev_err() macros defined in device.h,
- already included here, the argument being the struct device 'dev' of the
- sensor structure. Do NOT use these macros before the sensor is attached or
- the kernel will crash! However, you should not need to notify the user about
- common errors or other messages, since this is done by the master module.
+ already included here, the argument being the struct device '&usbdev->dev'
+ of the sensor structure. Do NOT use these macros before the sensor is
+ attached or the kernel will crash! However, you should not need to notify
+ the user about common errors or other messages, since this is done by the
+ master module.
*/
/*****************************************************************************/
@@ -345,13 +359,6 @@
error code without rolling back.
*/
- const struct device* dev;
- /*
- This is the argument for dev_err(), dev_info() and dev_warn(). It
- is used for debugging purposes. You must not access the struct
- before the sensor is attached.
- */
-
const struct usb_device* usbdev;
/*
Points to the usb_device struct after the sensor is attached.
diff --git a/drivers/usb/media/sn9c102_tas5110c1b.c b/drivers/usb/media/sn9c102_tas5110c1b.c
index 8775999..32ddf23 100644
--- a/drivers/usb/media/sn9c102_tas5110c1b.c
+++ b/drivers/usb/media/sn9c102_tas5110c1b.c
@@ -2,7 +2,7 @@
* Plug-in for TAS5110C1B image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/sn9c102_tas5130d1b.c b/drivers/usb/media/sn9c102_tas5130d1b.c
index 927eafd..a0728f0 100644
--- a/drivers/usb/media/sn9c102_tas5130d1b.c
+++ b/drivers/usb/media/sn9c102_tas5130d1b.c
@@ -2,7 +2,7 @@
* Plug-in for TAS5130D1B image sensor connected to the SN9C10x PC Camera *
* Controllers *
* *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it> *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c
index bff9434..9937fc6 100644
--- a/drivers/usb/media/w9968cf.c
+++ b/drivers/usb/media/w9968cf.c
@@ -62,7 +62,6 @@
MODULE_SUPPORTED_DEVICE("Video");
static int ovmod_load = W9968CF_OVMOD_LOAD;
-static int vppmod_load = W9968CF_VPPMOD_LOAD;
static unsigned short simcams = W9968CF_SIMCAMS;
static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
@@ -107,7 +106,6 @@
#ifdef CONFIG_KMOD
module_param(ovmod_load, bool, 0644);
-module_param(vppmod_load, bool, 0444);
#endif
module_param(simcams, ushort, 0644);
module_param_array(video_nr, short, ¶m_nv[0], 0444);
@@ -150,18 +148,6 @@
"\ninto memory."
"\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
"\n");
-MODULE_PARM_DESC(vppmod_load,
- "\n<0|1> Automatic 'w9968cf-vpp' module loading."
- "\n0 disabled, 1 enabled."
- "\nIf enabled, every time an application attempts to open a"
- "\ncamera, 'insmod' searches for the video post-processing"
- "\nmodule in the system and loads it automatically (if"
- "\npresent). The optional 'w9968cf-vpp' module adds extra"
- "\n image manipulation functions to the 'w9968cf' module,like"
- "\nsoftware up-scaling,colour conversions and video decoding"
- "\nfor very high frame rates."
- "\nDefault value is "__MODULE_STRING(W9968CF_VPPMOD_LOAD)"."
- "\n");
#endif
MODULE_PARM_DESC(simcams,
"\n<n> Number of cameras allowed to stream simultaneously."
@@ -492,10 +478,6 @@
static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
static void w9968cf_release_resources(struct w9968cf_device*);
-/* Intermodule communication */
-static int w9968cf_vppmod_detect(struct w9968cf_device*);
-static void w9968cf_vppmod_release(struct w9968cf_device*);
-
/****************************************************************************
@@ -2737,9 +2719,7 @@
cam->streaming = 0;
cam->misconfigured = 0;
- if (!w9968cf_vpp)
- if ((err = w9968cf_vppmod_detect(cam)))
- goto out;
+ w9968cf_adjust_configuration(cam);
if ((err = w9968cf_allocate_memory(cam)))
goto deallocate_memory;
@@ -2766,7 +2746,6 @@
deallocate_memory:
w9968cf_deallocate_memory(cam);
-out:
DBG(2, "Failed to open the video device")
up(&cam->dev_sem);
up_read(&w9968cf_disconnect);
@@ -2784,8 +2763,6 @@
w9968cf_stop_transfer(cam);
- w9968cf_vppmod_release(cam);
-
if (cam->disconnected) {
w9968cf_release_resources(cam);
up(&cam->dev_sem);
@@ -3681,106 +3658,6 @@
* Module init, exit and intermodule communication *
****************************************************************************/
-static int w9968cf_vppmod_detect(struct w9968cf_device* cam)
-{
- if (!w9968cf_vpp)
- if (vppmod_load)
- request_module("w9968cf-vpp");
-
- down(&w9968cf_vppmod_lock);
-
- if (!w9968cf_vpp) {
- DBG(4, "Video post-processing module not detected")
- w9968cf_adjust_configuration(cam);
- goto out;
- }
-
- if (!try_module_get(w9968cf_vpp->owner)) {
- DBG(1, "Couldn't increment the reference count of "
- "the video post-processing module")
- up(&w9968cf_vppmod_lock);
- return -ENOSYS;
- }
-
- w9968cf_vpp->busy++;
-
- DBG(5, "Video post-processing module detected")
-
-out:
- up(&w9968cf_vppmod_lock);
- return 0;
-}
-
-
-static void w9968cf_vppmod_release(struct w9968cf_device* cam)
-{
- down(&w9968cf_vppmod_lock);
-
- if (w9968cf_vpp && w9968cf_vpp->busy) {
- module_put(w9968cf_vpp->owner);
- w9968cf_vpp->busy--;
- wake_up(&w9968cf_vppmod_wait);
- DBG(5, "Video post-processing module released")
- }
-
- up(&w9968cf_vppmod_lock);
-}
-
-
-int w9968cf_vppmod_register(struct w9968cf_vpp_t* vpp)
-{
- down(&w9968cf_vppmod_lock);
-
- if (w9968cf_vpp) {
- KDBG(1, "Video post-processing module already registered")
- up(&w9968cf_vppmod_lock);
- return -EINVAL;
- }
-
- w9968cf_vpp = vpp;
- w9968cf_vpp->busy = 0;
-
- KDBG(2, "Video post-processing module registered")
- up(&w9968cf_vppmod_lock);
- return 0;
-}
-
-
-int w9968cf_vppmod_deregister(struct w9968cf_vpp_t* vpp)
-{
- down(&w9968cf_vppmod_lock);
-
- if (!w9968cf_vpp) {
- up(&w9968cf_vppmod_lock);
- return -EINVAL;
- }
-
- if (w9968cf_vpp != vpp) {
- KDBG(1, "Only the owner can unregister the video "
- "post-processing module")
- up(&w9968cf_vppmod_lock);
- return -EINVAL;
- }
-
- if (w9968cf_vpp->busy) {
- KDBG(2, "Video post-processing module busy. Wait for it to be "
- "released...")
- up(&w9968cf_vppmod_lock);
- wait_event(w9968cf_vppmod_wait, !w9968cf_vpp->busy);
- w9968cf_vpp = NULL;
- goto out;
- }
-
- w9968cf_vpp = NULL;
-
- up(&w9968cf_vppmod_lock);
-
-out:
- KDBG(2, "Video post-processing module unregistered")
- return 0;
-}
-
-
static int __init w9968cf_module_init(void)
{
int err;
@@ -3810,6 +3687,3 @@
module_init(w9968cf_module_init);
module_exit(w9968cf_module_exit);
-
-EXPORT_SYMBOL(w9968cf_vppmod_register);
-EXPORT_SYMBOL(w9968cf_vppmod_deregister);
diff --git a/drivers/usb/media/w9968cf.h b/drivers/usb/media/w9968cf.h
index 8acbfe2..47a6ff7 100644
--- a/drivers/usb/media/w9968cf.h
+++ b/drivers/usb/media/w9968cf.h
@@ -195,7 +195,6 @@
};
static struct w9968cf_vpp_t* w9968cf_vpp;
-static DECLARE_MUTEX(w9968cf_vppmod_lock);
static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
diff --git a/drivers/usb/media/w9968cf_vpp.h b/drivers/usb/media/w9968cf_vpp.h
index 3f5317d..f3b91b7 100644
--- a/drivers/usb/media/w9968cf_vpp.h
+++ b/drivers/usb/media/w9968cf_vpp.h
@@ -37,7 +37,4 @@
u8 busy; /* read-only flag: module is/is not in use */
};
-extern int w9968cf_vppmod_register(struct w9968cf_vpp_t*);
-extern int w9968cf_vppmod_deregister(struct w9968cf_vpp_t*);
-
#endif /* _W9968CF_VPP_H_ */
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 449b250..ad2f4cc 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -2093,6 +2093,8 @@
static struct usb_device_id auerswald_ids [] = {
{ USB_DEVICE (ID_AUERSWALD, 0x00C0) }, /* COMpact 2104 USB */
{ USB_DEVICE (ID_AUERSWALD, 0x00DB) }, /* COMpact 4410/2206 USB */
+ { USB_DEVICE (ID_AUERSWALD, 0x00DC) }, /* COMpact 4406 DSL */
+ { USB_DEVICE (ID_AUERSWALD, 0x00DD) }, /* COMpact 2204 USB */
{ USB_DEVICE (ID_AUERSWALD, 0x00F1) }, /* Comfort 2000 System Telephone */
{ USB_DEVICE (ID_AUERSWALD, 0x00F2) }, /* Comfort 1200 System Telephone */
{ } /* Terminating entry */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 981d8a5..331d4ae 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -593,7 +593,7 @@
/*
* usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
+ * and to have the device registered with the driver core
*/
static struct usb_class_driver ld_usb_class = {
.name = "ldusb%d",
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 5411816..3094970 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -916,6 +916,10 @@
// Linksys USB200M Rev 2
USB_DEVICE (0x13b1, 0x0018),
.driver_info = (unsigned long) &ax88772_info,
+}, {
+ // 0Q0 cable ethernet
+ USB_DEVICE (0x1557, 0x7720),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index da46b35..dc7a069 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -32,7 +32,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.05"
+#define DRIVER_VERSION "v0.06"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@@ -55,11 +55,15 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
- { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
- { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
- { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
- { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 10bc1bf..f2b4ca8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -476,10 +476,16 @@
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 00d45f8..ca40f16 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -31,9 +31,14 @@
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+
/* www.irtrans.de device */
#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
@@ -51,6 +56,12 @@
#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
/*
+ * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
+ * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
+ * (the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+/*
* The following are the values for the Matrix Orbital LCD displays,
* which are the FT232BM ( similar to the 8U232AM )
*/
@@ -215,8 +226,10 @@
* Definitions for ATIK Instruments astronomical USB based cameras
* Check it at http://www.atik-instruments.com/
*/
-#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */
-#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */
+#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
/*
* Protego product ids
@@ -365,6 +378,12 @@
#define POSIFLEX_VID 0x0d3a /* Vendor ID */
#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 0eb883f..e8e575e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -73,7 +73,9 @@
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
- { USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
+ { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
+ { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID ) },
+ { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 21d434d..1807087 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -64,3 +64,10 @@
/* Nokia CA-42 Cable */
#define NOKIA_CA42_VENDOR_ID 0x078b
#define NOKIA_CA42_PRODUCT_ID 0x1234
+
+/* CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc */
+#define CA_42_CA42_VENDOR_ID 0x10b5
+#define CA_42_CA42_PRODUCT_ID 0xac70
+
+#define SAGEM_VENDOR_ID 0x079b
+#define SAGEM_PRODUCT_ID 0x0027
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 5b06f92..ab173b3 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -45,6 +45,12 @@
#include "debug.h"
#include "transport.h"
+#define RIO_MSC 0x08
+#define RIOP_INIT "RIOP\x00\x01\x08"
+#define RIOP_INIT_LEN 7
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */
int usb_stor_euscsi_init(struct us_data *us)
@@ -91,3 +97,70 @@
return (res ? -1 : 0);
}
+
+/* Place the Rio Karma into mass storage mode.
+ *
+ * The initialization begins by sending 40 bytes starting
+ * RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte
+ * packet with the high four bits set and everything else null.
+ *
+ * Next, we send RIOP\x80\x00\x08\x00. Each time, a 512 byte response
+ * must be read, but we must loop until byte 5 in the response is 0x08,
+ * indicating success. */
+int rio_karma_init(struct us_data *us)
+{
+ int result, partial;
+ char *recv;
+ unsigned long timeout;
+
+ // us->iobuf is big enough to hold cmd but not receive
+ if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL)))
+ goto die_nomem;
+
+ US_DEBUGP("Initializing Karma...\n");
+
+ memset(us->iobuf, 0, RIO_SEND_LEN);
+ memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN);
+
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ us->iobuf, RIO_SEND_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto die;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ recv, RIO_RECV_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto die;
+
+ us->iobuf[4] = 0x80;
+ us->iobuf[5] = 0;
+ timeout = jiffies + msecs_to_jiffies(3000);
+ for (;;) {
+ US_DEBUGP("Sending init command\n");
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ us->iobuf, RIO_SEND_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto die;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ recv, RIO_RECV_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto die;
+
+ if (recv[5] == RIO_MSC)
+ break;
+ if (time_after(jiffies, timeout))
+ goto die;
+ msleep(10);
+ }
+ US_DEBUGP("Karma initialized.\n");
+ kfree(recv);
+ return 0;
+
+die:
+ kfree(recv);
+die_nomem:
+ US_DEBUGP("Could not initialize karma.\n");
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 4c1b2bd..f9907a5 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -48,3 +48,4 @@
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
+int rio_karma_init(struct us_data *us);
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index b28151d..b1ec4a7 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -116,7 +116,7 @@
static int usu_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- int type;
+ unsigned long type;
int rc;
unsigned long flags;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index dc301e5..ee958f9 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -145,6 +145,11 @@
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
+UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
+ "Rio",
+ "Rio Karma",
+ US_SC_SCSI, US_PR_BULK, rio_karma_init, 0),
+
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
@@ -424,11 +429,11 @@
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
/* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0500,
- "Sony",
- "DSC-T1",
- US_SC_8070, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN ),
+UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0600,
+ "Sony",
+ "DSC-T1/T5",
+ US_SC_8070, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
/* Reported by wim@geeks.nl */
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 5d02f16..4de9fb5 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -234,7 +234,7 @@
/*
* usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
+ * and to have the device registered with the driver core
*/
static struct usb_class_driver skel_class = {
.name = "skel%d",
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index b218717..6761b68 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -116,9 +116,10 @@
int ret = 0;
memset(&var->transp, 0, sizeof(var->transp));
- memset(&var->red, 0, sizeof(var->red));
- memset(&var->green, 0, sizeof(var->green));
- memset(&var->blue, 0, sizeof(var->blue));
+
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
switch (var->bits_per_pixel) {
case 1:
@@ -133,34 +134,20 @@
var->blue.offset = 0;
break;
case 16:
- var->red.length = 5;
- var->green.length = 6;
- var->blue.length = 5;
- if (fb->panel->cntl & CNTL_BGR) {
- var->red.offset = 11;
- var->green.offset = 5;
- var->blue.offset = 0;
- } else {
- var->red.offset = 0;
- var->green.offset = 5;
- var->blue.offset = 11;
- }
+ var->red.length = 5;
+ var->blue.length = 5;
+ /*
+ * Green length can be 5 or 6 depending whether
+ * we're operating in RGB555 or RGB565 mode.
+ */
+ if (var->green.length != 5 && var->green.length != 6)
+ var->green.length = 6;
break;
case 32:
if (fb->panel->cntl & CNTL_LCDTFT) {
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
-
- if (fb->panel->cntl & CNTL_BGR) {
- var->red.offset = 16;
- var->green.offset = 8;
- var->blue.offset = 0;
- } else {
- var->red.offset = 0;
- var->green.offset = 8;
- var->blue.offset = 16;
- }
break;
}
default:
@@ -168,6 +155,23 @@
break;
}
+ /*
+ * >= 16bpp displays have separate colour component bitfields
+ * encoded in the pixel data. Calculate their position from
+ * the bitfield length defined above.
+ */
+ if (ret == 0 && var->bits_per_pixel >= 16) {
+ if (fb->panel->cntl & CNTL_BGR) {
+ var->blue.offset = 0;
+ var->green.offset = var->blue.offset + var->blue.length;
+ var->red.offset = var->green.offset + var->green.length;
+ } else {
+ var->red.offset = 0;
+ var->green.offset = var->red.offset + var->red.length;
+ var->blue.offset = var->green.offset + var->green.length;
+ }
+ }
+
return ret;
}
diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c
index 2b97246..0ae0a97 100644
--- a/drivers/video/cyblafb.c
+++ b/drivers/video/cyblafb.c
@@ -1665,7 +1665,6 @@
}
#endif
output("CyblaFB version %s initializing\n", VERSION);
- return pci_module_init(&cyblafb_pci_driver);
return pci_register_driver(&cyblafb_pci_driver);
}
diff --git a/fs/bio.c b/fs/bio.c
index bbc442b..1f3bb50 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -411,6 +411,7 @@
/**
* bio_add_pc_page - attempt to add page to bio
+ * @q: the target queue
* @bio: destination bio
* @page: page to add
* @len: vec entry length
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
index abfbe45..5f8223e 100644
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ b/include/asm-arm/arch-s3c2410/debug-macro.S
@@ -25,7 +25,7 @@
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
- ldreq \rx, = S3C2410_PA_UART
+ ldreq \rx, = S3C24XX_PA_UART
ldrne \rx, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C2410_UART != 0
add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
@@ -44,7 +44,7 @@
1003:
mrc p15, 0, \rd, c1, c0
tst \rd, #1
- addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
@@ -75,7 +75,7 @@
1003:
mrc p15, 0, \rd, c1, c0
tst \rd, #1
- addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
index 1833ea5..c380d26 100644
--- a/include/asm-arm/arch-s3c2410/map.h
+++ b/include/asm-arm/arch-s3c2410/map.h
@@ -14,6 +14,7 @@
* 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics out
* 10-Feb-2005 BJD Added CAMIF definition from guillaume.gourat@nexvision.tv
* 10-Mar-2005 LCVR Added support to S3C2400, changed {VA,SZ} names
+ * 15-Jan-2006 LCVR Added S3C24XX_PA macros for common S3C24XX resources
*/
#ifndef __ASM_ARCH_MAP_H
@@ -188,5 +189,42 @@
#define S3C2400_SDRAM_PA (S3C2400_CS6)
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_PA_IRQ S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2400_PA_LCD
+#define S3C24XX_PA_UART S3C2400_PA_UART
+#define S3C24XX_PA_TIMER S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2400_PA_IIC
+#define S3C24XX_PA_IIS S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC S3C2400_PA_RTC
+#define S3C24XX_PA_ADC S3C2400_PA_ADC
+#define S3C24XX_PA_SPI S3C2400_PA_SPI
+#else
+#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2410_PA_LCD
+#define S3C24XX_PA_UART S3C2410_PA_UART
+#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2410_PA_IIC
+#define S3C24XX_PA_IIS S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC S3C2410_PA_RTC
+#define S3C24XX_PA_ADC S3C2410_PA_ADC
+#define S3C24XX_PA_SPI S3C2410_PA_SPI
+#endif
#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
index ce1bbba..83b0125 100644
--- a/include/asm-arm/arch-s3c2410/regs-serial.h
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -39,9 +39,9 @@
#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 )
#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 )
-#define S3C2410_PA_UART0 (S3C2410_PA_UART)
-#define S3C2410_PA_UART1 (S3C2410_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2 (S3C2410_PA_UART + 0x8000 )
+#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
#define S3C2410_URXH (0x24)
#define S3C2410_UTXH (0x20)
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
index ddd1578..4367ec0 100644
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ b/include/asm-arm/arch-s3c2410/uncompress.h
@@ -35,13 +35,13 @@
#undef S3C2410_GPIOREG
#undef S3C2410_WDOGREG
-#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
-#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x)))
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
-#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
+#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
index 3351b77..e8ea67c 100644
--- a/include/asm-arm/mach/map.h
+++ b/include/asm-arm/mach/map.h
@@ -26,6 +26,7 @@
#define MT_MEMORY 5
#define MT_ROM 6
#define MT_IXP2000_DEVICE 7
+#define MT_NONSHARED_DEVICE 8
extern void create_memmap_holes(struct meminfo *);
extern void memtable_init(struct meminfo *);
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index 5a0d19b..70e00d0 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -168,6 +168,7 @@
#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2))
/*
* - coarse table (not used)
diff --git a/include/asm-ia64/sn/sn_feature_sets.h b/include/asm-ia64/sn/sn_feature_sets.h
index e68a808..9ca642c 100644
--- a/include/asm-ia64/sn/sn_feature_sets.h
+++ b/include/asm-ia64/sn/sn_feature_sets.h
@@ -8,7 +8,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved.
*/
@@ -27,14 +27,12 @@
* "false" for new features.
*
* Use:
- * if (sn_prom_feature_available(PRF_FEATURE_XXX))
+ * if (sn_prom_feature_available(PRF_XXX))
* ...
*/
-/*
- * Example: feature XXX
- */
-#define PRF_FEATURE_XXX 0
+#define PRF_PAL_CACHE_FLUSH_SAFE 0
+#define PRF_DEVICE_FLUSH_LIST 1
@@ -51,7 +49,7 @@
*
* By default, features are disabled unless explicitly enabled.
*/
-#define OSF_MCA_SLV_TO_OS_INIT_SLV 0
-#define OSF_FEAT_LOG_SBES 1
+#define OSF_MCA_SLV_TO_OS_INIT_SLV 0
+#define OSF_FEAT_LOG_SBES 1
#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
diff --git a/include/asm-sparc64/spinlock.h b/include/asm-sparc64/spinlock.h
index ec85d12..508c416 100644
--- a/include/asm-sparc64/spinlock.h
+++ b/include/asm-sparc64/spinlock.h
@@ -131,6 +131,28 @@
: "memory");
}
+static int inline __read_trylock(raw_rwlock_t *lock)
+{
+ int tmp1, tmp2;
+
+ __asm__ __volatile__ (
+"1: ldsw [%2], %0\n"
+" brlz,a,pn %0, 2f\n"
+" mov 0, %0\n"
+" add %0, 1, %1\n"
+" cas [%2], %0, %1\n"
+" cmp %0, %1\n"
+" membar #StoreLoad | #StoreStore\n"
+" bne,pn %%icc, 1b\n"
+" mov 1, %0\n"
+"2:"
+ : "=&r" (tmp1), "=&r" (tmp2)
+ : "r" (lock)
+ : "memory");
+
+ return tmp1;
+}
+
static void inline __read_unlock(raw_rwlock_t *lock)
{
unsigned long tmp1, tmp2;
@@ -211,12 +233,12 @@
}
#define __raw_read_lock(p) __read_lock(p)
+#define __raw_read_trylock(p) __read_trylock(p)
#define __raw_read_unlock(p) __read_unlock(p)
#define __raw_write_lock(p) __write_lock(p)
#define __raw_write_unlock(p) __write_unlock(p)
#define __raw_write_trylock(p) __write_trylock(p)
-#define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
#define __raw_read_can_lock(rw) (!((rw)->lock & 0x80000000UL))
#define __raw_write_can_lock(rw) (!(rw)->lock)
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index 17a17c5..6d59c8e 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -111,6 +111,7 @@
} agp_unbind;
#else /* __KERNEL__ */
+#include <linux/mutex.h>
#define AGPGART_MINOR 175
@@ -201,7 +202,7 @@
};
struct agp_front_data {
- struct semaphore agp_mutex;
+ struct mutex agp_mutex;
struct agp_controller *current_controller;
struct agp_controller *controllers;
struct agp_file_private *file_priv_list;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 02a585f..860e7a4 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -392,8 +392,8 @@
unsigned int nr_congestion_off;
unsigned int nr_batching;
- unsigned short max_sectors;
- unsigned short max_hw_sectors;
+ unsigned int max_sectors;
+ unsigned int max_hw_sectors;
unsigned short max_phys_segments;
unsigned short max_hw_segments;
unsigned short hardsect_size;
@@ -697,7 +697,7 @@
extern void blk_cleanup_queue(request_queue_t *);
extern void blk_queue_make_request(request_queue_t *, make_request_fn *);
extern void blk_queue_bounce_limit(request_queue_t *, u64);
-extern void blk_queue_max_sectors(request_queue_t *, unsigned short);
+extern void blk_queue_max_sectors(request_queue_t *, unsigned int);
extern void blk_queue_max_phys_segments(request_queue_t *, unsigned short);
extern void blk_queue_max_hw_segments(request_queue_t *, unsigned short);
extern void blk_queue_max_segment_size(request_queue_t *, unsigned int);
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index c31650d..17866d7 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -14,6 +14,7 @@
#ifndef _LINUX_CPUFREQ_H
#define _LINUX_CPUFREQ_H
+#include <linux/mutex.h>
#include <linux/config.h>
#include <linux/notifier.h>
#include <linux/threads.h>
@@ -82,7 +83,7 @@
unsigned int policy; /* see above */
struct cpufreq_governor *governor; /* see below */
- struct semaphore lock; /* CPU ->setpolicy or ->target may
+ struct mutex lock; /* CPU ->setpolicy or ->target may
only be called once a time */
struct work_struct update; /* if update_policy() needs to be
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 59ff6c4..6500d4e 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -19,7 +19,21 @@
/* For standard target */
#define XT_RETURN (-NF_REPEAT - 1)
-#define XT_ALIGN(s) (((s) + (__alignof__(u_int64_t)-1)) & ~(__alignof__(u_int64_t)-1))
+/* this is a dummy structure to find out the alignment requirement for a struct
+ * containing all the fundamental data types that are used in ipt_entry,
+ * ip6t_entry and arpt_entry. This sucks, and it is a hack. It will be my
+ * personal pleasure to remove it -HW
+ */
+struct _xt_align
+{
+ u_int8_t u8;
+ u_int16_t u16;
+ u_int32_t u32;
+ u_int64_t u64;
+};
+
+#define XT_ALIGN(s) (((s) + (__alignof__(struct _xt_align)-1)) \
+ & ~(__alignof__(struct _xt_align)-1))
/* Standard return verdict, or do jump. */
#define XT_STANDARD_TARGET ""
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0a44072..fe1a2b0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -406,7 +406,6 @@
struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn);
int pci_find_capability (struct pci_dev *dev, int cap);
int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
-int pci_find_ext_capability (struct pci_dev *dev, int cap);
struct pci_bus * pci_find_next_bus(const struct pci_bus *from);
struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from);
@@ -626,7 +625,6 @@
static inline void pci_unregister_driver(struct pci_driver *drv) { }
static inline int pci_find_capability (struct pci_dev *dev, int cap) {return 0; }
static inline int pci_find_next_capability (struct pci_dev *dev, u8 post, int cap) { return 0; }
-static inline int pci_find_ext_capability (struct pci_dev *dev, int cap) {return 0; }
static inline const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev) { return NULL; }
/* Power management related routines */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ecc1fc1..b0b908f 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -394,14 +394,9 @@
#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511
#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515
#define PCI_DEVICE_ID_NS_87410 0xd001
-#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d
#define PCI_DEVICE_ID_NS_CS5535_HOST_BRIDGE 0x0028
#define PCI_DEVICE_ID_NS_CS5535_ISA_BRIDGE 0x002b
-#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d
-#define PCI_DEVICE_ID_NS_CS5535_AUDIO 0x002e
-#define PCI_DEVICE_ID_NS_CS5535_USB 0x002f
-#define PCI_DEVICE_ID_NS_CS5535_VIDEO 0x0030
#define PCI_VENDOR_ID_TSENG 0x100c
#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202
@@ -511,8 +506,6 @@
#define PCI_DEVICE_ID_AMD_CS5536_UOC 0x2097
#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A
-#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A
-
#define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081
#define PCI_DEVICE_ID_AMD_LX_AES 0x2082
@@ -2065,6 +2058,7 @@
#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5
#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6
#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db
+#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd
#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1
#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2
#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4
@@ -2085,6 +2079,8 @@
#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592
#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770
#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772
+#define PCI_DEVICE_ID_INTEL_82945GM_HB 0x27A0
+#define PCI_DEVICE_ID_INTEL_82945GM_IG 0x27A2
#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640
#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642
@@ -2104,6 +2100,13 @@
#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd
#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de
#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df
+#define PCI_DEVICE_ID_INTEL_ICH8_0 0x2810
+#define PCI_DEVICE_ID_INTEL_ICH8_1 0x2811
+#define PCI_DEVICE_ID_INTEL_ICH8_2 0x2812
+#define PCI_DEVICE_ID_INTEL_ICH8_3 0x2814
+#define PCI_DEVICE_ID_INTEL_ICH8_4 0x2815
+#define PCI_DEVICE_ID_INTEL_ICH8_5 0x283e
+#define PCI_DEVICE_ID_INTEL_ICH8_6 0x2850
#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
@@ -2147,6 +2150,7 @@
#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4
+#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5
#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca
#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb
#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index cee302a..73b464f 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -26,7 +26,7 @@
unsigned char regshift; /* register shift */
unsigned char iotype; /* UPIO_* */
unsigned char hub6;
- unsigned int flags; /* UPF_* flags */
+ upf_t flags; /* UPF_* flags */
};
/*
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index ec35100..4041122 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -203,6 +203,8 @@
__u32 buf_overrun;
};
+typedef unsigned int __bitwise__ upf_t;
+
struct uart_port {
spinlock_t lock; /* port lock */
unsigned int iobase; /* in/out[bwl] */
@@ -230,36 +232,34 @@
unsigned long sysrq; /* sysrq timeout */
#endif
- unsigned int flags;
+ upf_t flags;
-#define UPF_FOURPORT (1 << 1)
-#define UPF_SAK (1 << 2)
-#define UPF_SPD_MASK (0x1030)
-#define UPF_SPD_HI (0x0010)
-#define UPF_SPD_VHI (0x0020)
-#define UPF_SPD_CUST (0x0030)
-#define UPF_SPD_SHI (0x1000)
-#define UPF_SPD_WARP (0x1010)
-#define UPF_SKIP_TEST (1 << 6)
-#define UPF_AUTO_IRQ (1 << 7)
-#define UPF_HARDPPS_CD (1 << 11)
-#define UPF_LOW_LATENCY (1 << 13)
-#define UPF_BUGGY_UART (1 << 14)
-#define UPF_AUTOPROBE (1 << 15)
-#define UPF_MAGIC_MULTIPLIER (1 << 16)
-#define UPF_BOOT_ONLYMCA (1 << 22)
-#define UPF_CONS_FLOW (1 << 23)
-#define UPF_SHARE_IRQ (1 << 24)
-#define UPF_BOOT_AUTOCONF (1 << 28)
-#define UPF_IOREMAP (1 << 31)
+#define UPF_FOURPORT ((__force upf_t) (1 << 1))
+#define UPF_SAK ((__force upf_t) (1 << 2))
+#define UPF_SPD_MASK ((__force upf_t) (0x1030))
+#define UPF_SPD_HI ((__force upf_t) (0x0010))
+#define UPF_SPD_VHI ((__force upf_t) (0x0020))
+#define UPF_SPD_CUST ((__force upf_t) (0x0030))
+#define UPF_SPD_SHI ((__force upf_t) (0x1000))
+#define UPF_SPD_WARP ((__force upf_t) (0x1010))
+#define UPF_SKIP_TEST ((__force upf_t) (1 << 6))
+#define UPF_AUTO_IRQ ((__force upf_t) (1 << 7))
+#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
+#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
+#define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
+#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
+#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
+#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
+#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
+#define UPF_IOREMAP ((__force upf_t) (1 << 31))
-#define UPF_CHANGE_MASK (0x17fff)
-#define UPF_USR_MASK (UPF_SPD_MASK|UPF_LOW_LATENCY)
+#define UPF_CHANGE_MASK ((__force upf_t) (0x17fff))
+#define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
unsigned int mctrl; /* current modem ctrl settings */
unsigned int timeout; /* character-based timeout */
unsigned int type; /* port type */
- struct uart_ops *ops;
+ const struct uart_ops *ops;
unsigned int custom_divisor;
unsigned int line; /* port index */
unsigned long mapbase; /* for ioremap */
@@ -289,6 +289,9 @@
};
#define UART_XMIT_SIZE PAGE_SIZE
+
+typedef unsigned int __bitwise__ uif_t;
+
/*
* This is the state information which is only valid when the port
* is open; it may be freed by the core driver once the device has
@@ -298,17 +301,16 @@
struct uart_info {
struct tty_struct *tty;
struct circ_buf xmit;
- unsigned int flags;
+ uif_t flags;
/*
- * These are the flags that specific to info->flags, and reflect our
- * internal state. They can not be accessed via port->flags. Low
- * level drivers must not change these, but may query them instead.
+ * Definitions for info->flags. These are _private_ to serial_core, and
+ * are specific to this structure. They may be queried by low level drivers.
*/
-#define UIF_CHECK_CD (1 << 25)
-#define UIF_CTS_FLOW (1 << 26)
-#define UIF_NORMAL_ACTIVE (1 << 29)
-#define UIF_INITIALIZED (1 << 31)
+#define UIF_CHECK_CD ((__force uif_t) (1 << 25))
+#define UIF_CTS_FLOW ((__force uif_t) (1 << 26))
+#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29))
+#define UIF_INITIALIZED ((__force uif_t) (1 << 31))
int blocked_open;
@@ -430,7 +432,7 @@
port->sysrq = 0;
}
#endif
- if (info->flags & UPF_SAK)
+ if (port->flags & UPF_SAK)
do_SAK(info->tty);
return 0;
}
diff --git a/include/linux/time.h b/include/linux/time.h
index 614dd84..7b4dc365 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -48,7 +48,7 @@
* Returns true if the timespec is norm, false if denorm:
*/
#define timespec_valid(ts) \
- (((ts)->tv_sec >= 0) && (((unsigned) (ts)->tv_nsec) < NSEC_PER_SEC))
+ (((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
/*
* 64-bit nanosec type. Large enough to span 292+ years in nanosecond
diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h
index ee21e6b..a2aacfc 100644
--- a/include/linux/usb_ch9.h
+++ b/include/linux/usb_ch9.h
@@ -535,9 +535,11 @@
*/
USB_STATE_NOTATTACHED = 0,
- /* the chapter 9 device states */
+ /* chapter 9 and authentication (wireless) device states */
USB_STATE_ATTACHED,
- USB_STATE_POWERED,
+ USB_STATE_POWERED, /* wired */
+ USB_STATE_UNAUTHENTICATED, /* auth */
+ USB_STATE_RECONNECTING, /* auth */
USB_STATE_DEFAULT, /* limited function */
USB_STATE_ADDRESS,
USB_STATE_CONFIGURED, /* most functions */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index ce40675..6f6c697 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -315,6 +315,7 @@
#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P','W','C','1') /* pwc older webcam */
#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P','W','C','2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E','6','2','5') /* ET61X251 compression */
/*
* F O R M A T E N U M E R A T I O N
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index df05f46..9a92aef 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -803,9 +803,9 @@
#define IEEE80211_24GHZ_MAX_CHANNEL 14
#define IEEE80211_24GHZ_CHANNELS 14
-#define IEEE80211_52GHZ_MIN_CHANNEL 36
+#define IEEE80211_52GHZ_MIN_CHANNEL 34
#define IEEE80211_52GHZ_MAX_CHANNEL 165
-#define IEEE80211_52GHZ_CHANNELS 32
+#define IEEE80211_52GHZ_CHANNELS 131
enum {
IEEE80211_CH_PASSIVE_ONLY = (1 << 0),
diff --git a/include/net/route.h b/include/net/route.h
index e3e5436..9c04f15 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -170,8 +170,8 @@
return ip_route_output_flow(rp, &fl, sk, 0);
}
-static inline int ip_route_newports(struct rtable **rp, u16 sport, u16 dport,
- struct sock *sk)
+static inline int ip_route_newports(struct rtable **rp, u8 protocol,
+ u16 sport, u16 dport, struct sock *sk)
{
if (sport != (*rp)->fl.fl_ip_sport ||
dport != (*rp)->fl.fl_ip_dport) {
@@ -180,6 +180,7 @@
memcpy(&fl, &(*rp)->fl, sizeof(fl));
fl.fl_ip_sport = sport;
fl.fl_ip_dport = dport;
+ fl.proto = protocol;
ip_rt_put(*rp);
*rp = NULL;
return ip_route_output_flow(rp, &fl, sk, 0);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index e94ca4d..290e3b4 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -275,7 +275,7 @@
int data_direction, void *buffer, unsigned bufflen,
struct scsi_sense_hdr *, int timeout, int retries);
extern int scsi_execute_async(struct scsi_device *sdev,
- const unsigned char *cmd, int data_direction,
+ const unsigned char *cmd, int cmd_len, int data_direction,
void *buffer, unsigned bufflen, int use_sg,
int timeout, int retries, void *privdata,
void (*done)(void *, char *, int, int),
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 467274a..8279929 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -554,7 +554,6 @@
/*
* ordered write support
*/
- unsigned ordered_flush:1;
unsigned ordered_tag:1;
/*
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 7732199..7712912 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -114,16 +114,16 @@
{
struct list_head *p;
- spin_lock(&rcu_torture_lock);
+ spin_lock_bh(&rcu_torture_lock);
if (list_empty(&rcu_torture_freelist)) {
atomic_inc(&n_rcu_torture_alloc_fail);
- spin_unlock(&rcu_torture_lock);
+ spin_unlock_bh(&rcu_torture_lock);
return NULL;
}
atomic_inc(&n_rcu_torture_alloc);
p = rcu_torture_freelist.next;
list_del_init(p);
- spin_unlock(&rcu_torture_lock);
+ spin_unlock_bh(&rcu_torture_lock);
return container_of(p, struct rcu_torture, rtort_free);
}
@@ -134,9 +134,9 @@
rcu_torture_free(struct rcu_torture *p)
{
atomic_inc(&n_rcu_torture_free);
- spin_lock(&rcu_torture_lock);
+ spin_lock_bh(&rcu_torture_lock);
list_add_tail(&p->rtort_free, &rcu_torture_freelist);
- spin_unlock(&rcu_torture_lock);
+ spin_unlock_bh(&rcu_torture_lock);
}
static void
diff --git a/kernel/sched.c b/kernel/sched.c
index 3ee2ae4..ec7fd9c 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5141,7 +5141,7 @@
#define SEARCH_SCOPE 2
#define MIN_CACHE_SIZE (64*1024U)
#define DEFAULT_CACHE_SIZE (5*1024*1024U)
-#define ITERATIONS 2
+#define ITERATIONS 1
#define SIZE_THRESH 130
#define COST_THRESH 130
@@ -5480,9 +5480,9 @@
break;
}
/*
- * Increase the cachesize in 5% steps:
+ * Increase the cachesize in 10% steps:
*/
- size = size * 20 / 19;
+ size = size * 10 / 9;
}
if (migration_debug)
diff --git a/kernel/time.c b/kernel/time.c
index 7477b1d..1f23e68 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -155,7 +155,7 @@
static int firsttime = 1;
int error = 0;
- if (!timespec_valid(tv))
+ if (tv && !timespec_valid(tv))
return -EINVAL;
error = security_settime(tv, tz);
diff --git a/kernel/user.c b/kernel/user.c
index 89e562f..d9deae4 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/key.h>
+#include <linux/interrupt.h>
/*
* UID task count cache, to get fast user lookup in "alloc_uid"
@@ -27,6 +28,16 @@
static kmem_cache_t *uid_cachep;
static struct list_head uidhash_table[UIDHASH_SZ];
+
+/*
+ * The uidhash_lock is mostly taken from process context, but it is
+ * occasionally also taken from softirq/tasklet context, when
+ * task-structs get RCU-freed. Hence all locking must be softirq-safe.
+ * But free_uid() is also called with local interrupts disabled, and running
+ * local_bh_enable() with local interrupts disabled is an error - we'll run
+ * softirq callbacks, and they can unconditionally enable interrupts, and
+ * the caller of free_uid() didn't expect that..
+ */
static DEFINE_SPINLOCK(uidhash_lock);
struct user_struct root_user = {
@@ -82,15 +93,19 @@
struct user_struct *find_user(uid_t uid)
{
struct user_struct *ret;
+ unsigned long flags;
- spin_lock(&uidhash_lock);
+ spin_lock_irqsave(&uidhash_lock, flags);
ret = uid_hash_find(uid, uidhashentry(uid));
- spin_unlock(&uidhash_lock);
+ spin_unlock_irqrestore(&uidhash_lock, flags);
return ret;
}
void free_uid(struct user_struct *up)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
if (up && atomic_dec_and_lock(&up->__count, &uidhash_lock)) {
uid_hash_remove(up);
key_put(up->uid_keyring);
@@ -98,6 +113,7 @@
kmem_cache_free(uid_cachep, up);
spin_unlock(&uidhash_lock);
}
+ local_irq_restore(flags);
}
struct user_struct * alloc_uid(uid_t uid)
@@ -105,9 +121,9 @@
struct list_head *hashent = uidhashentry(uid);
struct user_struct *up;
- spin_lock(&uidhash_lock);
+ spin_lock_irq(&uidhash_lock);
up = uid_hash_find(uid, hashent);
- spin_unlock(&uidhash_lock);
+ spin_unlock_irq(&uidhash_lock);
if (!up) {
struct user_struct *new;
@@ -137,7 +153,7 @@
* Before adding this, check whether we raced
* on adding the same user already..
*/
- spin_lock(&uidhash_lock);
+ spin_lock_irq(&uidhash_lock);
up = uid_hash_find(uid, hashent);
if (up) {
key_put(new->uid_keyring);
@@ -147,7 +163,7 @@
uid_hash_insert(new, hashent);
up = new;
}
- spin_unlock(&uidhash_lock);
+ spin_unlock_irq(&uidhash_lock);
}
return up;
@@ -183,9 +199,9 @@
INIT_LIST_HEAD(uidhash_table + n);
/* Insert the root user immediately (init already runs as root) */
- spin_lock(&uidhash_lock);
+ spin_lock_irq(&uidhash_lock);
uid_hash_insert(&root_user, uidhashentry(0));
- spin_unlock(&uidhash_lock);
+ spin_unlock_irq(&uidhash_lock);
return 0;
}
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index ba44288..da687c8 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -104,6 +104,7 @@
{
struct net_device *dev = p->dev;
+ dev->br_port = NULL;
p->br = NULL;
p->dev = NULL;
dev_put(dev);
@@ -118,13 +119,24 @@
destroy_nbp(p);
}
-/* called with RTNL */
+/* Delete port(interface) from bridge is done in two steps.
+ * via RCU. First step, marks device as down. That deletes
+ * all the timers and stops new packets from flowing through.
+ *
+ * Final cleanup doesn't occur until after all CPU's finished
+ * processing packets.
+ *
+ * Protected from multiple admin operations by RTNL mutex
+ */
static void del_nbp(struct net_bridge_port *p)
{
struct net_bridge *br = p->br;
struct net_device *dev = p->dev;
- dev->br_port = NULL;
+ /* Race between RTNL notify and RCU callback */
+ if (p->deleted)
+ return;
+
dev_set_promiscuity(dev, -1);
cancel_delayed_work(&p->carrier_check);
@@ -132,16 +144,13 @@
spin_lock_bh(&br->lock);
br_stp_disable_port(p);
+ p->deleted = 1;
spin_unlock_bh(&br->lock);
br_fdb_delete_by_port(br, p);
list_del_rcu(&p->list);
- del_timer_sync(&p->message_age_timer);
- del_timer_sync(&p->forward_delay_timer);
- del_timer_sync(&p->hold_timer);
-
call_rcu(&p->rcu, destroy_nbp_rcu);
}
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index c5bd631..e330b17 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -68,6 +68,7 @@
/* STP */
u8 priority;
u8 state;
+ u8 deleted;
u16 port_no;
unsigned char topology_change_ack;
unsigned char config_pending;
diff --git a/net/core/dev.c b/net/core/dev.c
index fd070a0..ffb8207 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2543,13 +2543,14 @@
case SIOCBONDENSLAVE:
case SIOCBONDRELEASE:
case SIOCBONDSETHWADDR:
- case SIOCBONDSLAVEINFOQUERY:
- case SIOCBONDINFOQUERY:
case SIOCBONDCHANGEACTIVE:
case SIOCBRADDIF:
case SIOCBRDELIF:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ /* fall through */
+ case SIOCBONDSLAVEINFOQUERY:
+ case SIOCBONDINFOQUERY:
dev_load(ifr.ifr_name);
rtnl_lock();
ret = dev_ifsioc(&ifr, cmd);
diff --git a/net/core/filter.c b/net/core/filter.c
index 9540946..93fbd01 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -64,7 +64,7 @@
}
/**
- * sk_run_filter - run a filter on a socket
+ * sk_run_filter - run a filter on a socket
* @skb: buffer to run the filter on
* @filter: filter to apply
* @flen: length of filter
@@ -78,8 +78,8 @@
{
struct sock_filter *fentry; /* We walk down these */
void *ptr;
- u32 A = 0; /* Accumulator */
- u32 X = 0; /* Index Register */
+ u32 A = 0; /* Accumulator */
+ u32 X = 0; /* Index Register */
u32 mem[BPF_MEMWORDS]; /* Scratch Memory Store */
u32 tmp;
int k;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index d0732e9..6766f11 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -135,13 +135,15 @@
struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask,
int fclone)
{
+ kmem_cache_t *cache;
struct skb_shared_info *shinfo;
struct sk_buff *skb;
u8 *data;
+ cache = fclone ? skbuff_fclone_cache : skbuff_head_cache;
+
/* Get the HEAD */
- skb = kmem_cache_alloc(fclone ? skbuff_fclone_cache : skbuff_head_cache,
- gfp_mask & ~__GFP_DMA);
+ skb = kmem_cache_alloc(cache, gfp_mask & ~__GFP_DMA);
if (!skb)
goto out;
@@ -180,7 +182,7 @@
out:
return skb;
nodata:
- kmem_cache_free(skbuff_head_cache, skb);
+ kmem_cache_free(cache, skb);
skb = NULL;
goto out;
}
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 00f9832..dc0487b 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -119,7 +119,8 @@
if (err != 0)
goto failure;
- err = ip_route_newports(&rt, inet->sport, inet->dport, sk);
+ err = ip_route_newports(&rt, IPPROTO_DCCP, inet->sport, inet->dport,
+ sk);
if (err != 0)
goto failure;
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index df07425..80c4d04 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -468,6 +468,7 @@
done:
if (opt && opt != np->opt)
sock_kfree_s(sk, opt, opt->tot_len);
+ dst_release(dst);
return err;
}
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 7a12180..960aa78 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -350,6 +350,7 @@
u8 src[ETH_ALEN];
struct ieee80211_crypt_data *crypt = NULL;
int keyidx = 0;
+ int can_be_decrypted = 0;
hdr = (struct ieee80211_hdr_4addr *)skb->data;
stats = &ieee->stats;
@@ -410,12 +411,23 @@
return 1;
}
- if (is_multicast_ether_addr(hdr->addr1)
- ? ieee->host_mc_decrypt : ieee->host_decrypt) {
+ can_be_decrypted = (is_multicast_ether_addr(hdr->addr1) ||
+ is_broadcast_ether_addr(hdr->addr2)) ?
+ ieee->host_mc_decrypt : ieee->host_decrypt;
+
+ if (can_be_decrypted) {
int idx = 0;
- if (skb->len >= hdrlen + 3)
+ if (skb->len >= hdrlen + 3) {
+ /* Top two-bits of byte 3 are the key index */
idx = skb->data[hdrlen + 3] >> 6;
+ }
+
+ /* ieee->crypt[] is WEP_KEY (4) in length. Given that idx
+ * is only allowed 2-bits of storage, no value of idx can
+ * be provided via above code that would result in idx
+ * being out of range */
crypt = ieee->crypt[idx];
+
#ifdef NOT_YET
sta = NULL;
@@ -553,7 +565,7 @@
/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
- if (ieee->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
+ if ((fc & IEEE80211_FCTL_PROTECTED) && can_be_decrypted &&
(keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
goto rx_dropped;
@@ -617,7 +629,7 @@
/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
* encrypted/authenticated */
- if (ieee->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) &&
+ if ((fc & IEEE80211_FCTL_PROTECTED) && can_be_decrypted &&
ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
goto rx_dropped;
@@ -1439,7 +1451,7 @@
break;
case IEEE80211_STYPE_PROBE_REQ:
- IEEE80211_DEBUG_MGMT("recieved auth (%d)\n",
+ IEEE80211_DEBUG_MGMT("received auth (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
@@ -1473,7 +1485,7 @@
break;
case IEEE80211_STYPE_AUTH:
- IEEE80211_DEBUG_MGMT("recieved auth (%d)\n",
+ IEEE80211_DEBUG_MGMT("received auth (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu
(header->frame_ctl)));
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
index 23e1630..f87c6b8 100644
--- a/net/ieee80211/ieee80211_wx.c
+++ b/net/ieee80211/ieee80211_wx.c
@@ -232,15 +232,18 @@
return start;
}
+#define SCAN_ITEM_SIZE 128
+
int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct ieee80211_network *network;
unsigned long flags;
+ int err = 0;
char *ev = extra;
- char *stop = ev + IW_SCAN_MAX_DATA;
+ char *stop = ev + wrqu->data.length;
int i = 0;
IEEE80211_DEBUG_WX("Getting scan\n");
@@ -249,6 +252,11 @@
list_for_each_entry(network, &ieee->network_list, list) {
i++;
+ if (stop - ev < SCAN_ITEM_SIZE) {
+ err = -E2BIG;
+ break;
+ }
+
if (ieee->scan_age == 0 ||
time_after(network->last_scanned + ieee->scan_age, jiffies))
ev = ipw2100_translate_scan(ieee, ev, stop, network);
@@ -270,7 +278,7 @@
IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
- return 0;
+ return err;
}
int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index d8ce713..0b4e95f 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -970,7 +970,7 @@
case IGMP_MTRACE_RESP:
break;
default:
- NETDEBUG(KERN_DEBUG "New IGMP type=%d, why we do not know about it?\n", ih->type);
+ break;
}
drop:
diff --git a/net/ipv4/tcp_htcp.c b/net/ipv4/tcp_htcp.c
index 3284cfb..128de4d 100644
--- a/net/ipv4/tcp_htcp.c
+++ b/net/ipv4/tcp_htcp.c
@@ -230,7 +230,6 @@
if (tp->snd_cwnd < tp->snd_cwnd_clamp)
tp->snd_cwnd++;
tp->snd_cwnd_cnt = 0;
- ca->ccount++;
}
}
}
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 6ea3539..233bdf2 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -236,7 +236,7 @@
if (err)
goto failure;
- err = ip_route_newports(&rt, inet->sport, inet->dport, sk);
+ err = ip_route_newports(&rt, IPPROTO_TCP, inet->sport, inet->dport, sk);
if (err)
goto failure;
@@ -1845,7 +1845,6 @@
}
EXPORT_SYMBOL(ipv4_specific);
-EXPORT_SYMBOL(inet_bind_bucket_create);
EXPORT_SYMBOL(tcp_hashinfo);
EXPORT_SYMBOL(tcp_prot);
EXPORT_SYMBOL(tcp_unhash);
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 6c05c79..4420948 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1252,8 +1252,7 @@
}
} else {
for (ma = idev->mc_list; ma; ma=ma->next) {
- if (group_type != IPV6_ADDR_ANY &&
- !ipv6_addr_equal(group, &ma->mca_addr))
+ if (!ipv6_addr_equal(group, &ma->mca_addr))
continue;
spin_lock_bh(&ma->mca_lock);
if (ma->mca_flags & MAF_TIMER_RUNNING) {
@@ -1268,11 +1267,10 @@
ma->mca_flags &= ~MAF_GSQUERY;
}
if (!(ma->mca_flags & MAF_GSQUERY) ||
- mld_marksources(ma, ntohs(mlh2->nsrcs), mlh2->srcs))
+ mld_marksources(ma, ntohs(mlh2->nsrcs), mlh2->srcs))
igmp6_group_queried(ma, max_delay);
spin_unlock_bh(&ma->mca_lock);
- if (group_type != IPV6_ADDR_ANY)
- break;
+ break;
}
}
read_unlock_bh(&idev->lock);
@@ -1351,7 +1349,7 @@
* in all filters
*/
if (psf->sf_count[MCAST_INCLUDE])
- return 0;
+ return type == MLD2_MODE_IS_INCLUDE;
return pmc->mca_sfcount[MCAST_EXCLUDE] ==
psf->sf_count[MCAST_EXCLUDE];
}
@@ -1966,7 +1964,7 @@
static int sf_setstate(struct ifmcaddr6 *pmc)
{
- struct ip6_sf_list *psf;
+ struct ip6_sf_list *psf, *dpsf;
int mca_xcount = pmc->mca_sfcount[MCAST_EXCLUDE];
int qrv = pmc->idev->mc_qrv;
int new_in, rv;
@@ -1978,8 +1976,48 @@
!psf->sf_count[MCAST_INCLUDE];
} else
new_in = psf->sf_count[MCAST_INCLUDE] != 0;
- if (new_in != psf->sf_oldin) {
- psf->sf_crcount = qrv;
+ if (new_in) {
+ if (!psf->sf_oldin) {
+ struct ip6_sf_list *prev = 0;
+
+ for (dpsf=pmc->mca_tomb; dpsf;
+ dpsf=dpsf->sf_next) {
+ if (ipv6_addr_equal(&dpsf->sf_addr,
+ &psf->sf_addr))
+ break;
+ prev = dpsf;
+ }
+ if (dpsf) {
+ if (prev)
+ prev->sf_next = dpsf->sf_next;
+ else
+ pmc->mca_tomb = dpsf->sf_next;
+ kfree(dpsf);
+ }
+ psf->sf_crcount = qrv;
+ rv++;
+ }
+ } else if (psf->sf_oldin) {
+ psf->sf_crcount = 0;
+ /*
+ * add or update "delete" records if an active filter
+ * is now inactive
+ */
+ for (dpsf=pmc->mca_tomb; dpsf; dpsf=dpsf->sf_next)
+ if (ipv6_addr_equal(&dpsf->sf_addr,
+ &psf->sf_addr))
+ break;
+ if (!dpsf) {
+ dpsf = (struct ip6_sf_list *)
+ kmalloc(sizeof(*dpsf), GFP_ATOMIC);
+ if (!dpsf)
+ continue;
+ *dpsf = *psf;
+ /* pmc->mca_lock held by callers */
+ dpsf->sf_next = pmc->mca_tomb;
+ pmc->mca_tomb = dpsf;
+ }
+ dpsf->sf_crcount = qrv;
rv++;
}
}
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 66d0400..ca9cf685 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -515,6 +515,7 @@
done:
if (opt && opt != np->opt)
sock_kfree_s(sk, opt, opt->tot_len);
+ dst_release(dst);
return err;
}
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 43f1ce7..ae86d23 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1620,6 +1620,7 @@
return -ENOBUFS;
hdr = (struct sadb_msg *) skb_put(skb, sizeof(struct sadb_msg));
hdr->sadb_msg_satype = pfkey_proto2satype(c->data.proto);
+ hdr->sadb_msg_type = SADB_FLUSH;
hdr->sadb_msg_seq = c->seq;
hdr->sadb_msg_pid = c->pid;
hdr->sadb_msg_version = PF_KEY_V2;
@@ -2385,6 +2386,7 @@
if (!skb_out)
return -ENOBUFS;
hdr = (struct sadb_msg *) skb_put(skb_out, sizeof(struct sadb_msg));
+ hdr->sadb_msg_type = SADB_X_SPDFLUSH;
hdr->sadb_msg_seq = c->seq;
hdr->sadb_msg_pid = c->pid;
hdr->sadb_msg_version = PF_KEY_V2;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index ee93abc..9db7dbd 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -365,7 +365,7 @@
*/
err = -EMSGSIZE;
- if(len>dev->mtu+dev->hard_header_len)
+ if (len > dev->mtu + dev->hard_header_len)
goto out_unlock;
err = -ENOBUFS;
@@ -935,7 +935,7 @@
* Check legality
*/
- if(addr_len!=sizeof(struct sockaddr))
+ if (addr_len != sizeof(struct sockaddr))
return -EINVAL;
strlcpy(name,uaddr->sa_data,sizeof(name));
@@ -1092,7 +1092,7 @@
* retries.
*/
- if(skb==NULL)
+ if (skb == NULL)
goto out;
/*
@@ -1392,8 +1392,8 @@
if (level != SOL_PACKET)
return -ENOPROTOOPT;
- if (get_user(len,optlen))
- return -EFAULT;
+ if (get_user(len, optlen))
+ return -EFAULT;
if (len < 0)
return -EINVAL;
@@ -1419,9 +1419,9 @@
return -ENOPROTOOPT;
}
- if (put_user(len, optlen))
- return -EFAULT;
- return 0;
+ if (put_user(len, optlen))
+ return -EFAULT;
+ return 0;
}
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 71c9a96..2b9a832 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -884,7 +884,7 @@
{
struct sctp_transport *transport = (struct sctp_transport *) arg;
- if (asoc->overall_error_count > asoc->max_retrans) {
+ if (asoc->overall_error_count >= asoc->max_retrans) {
/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -2122,7 +2122,7 @@
struct sctp_bind_addr *bp;
int attempts = asoc->init_err_counter + 1;
- if (attempts >= asoc->max_init_attempts) {
+ if (attempts > asoc->max_init_attempts) {
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
SCTP_U32(SCTP_ERROR_STALE_COOKIE));
return SCTP_DISPOSITION_DELETE_TCB;
@@ -4640,7 +4640,7 @@
SCTP_DEBUG_PRINTK("Timer T1 expired (INIT).\n");
- if (attempts < asoc->max_init_attempts) {
+ if (attempts <= asoc->max_init_attempts) {
bp = (struct sctp_bind_addr *) &asoc->base.bind_addr;
repl = sctp_make_init(asoc, bp, GFP_ATOMIC, 0);
if (!repl)
@@ -4697,7 +4697,7 @@
SCTP_DEBUG_PRINTK("Timer T1 expired (COOKIE-ECHO).\n");
- if (attempts < asoc->max_init_attempts) {
+ if (attempts <= asoc->max_init_attempts) {
repl = sctp_make_cookie_echo(asoc, NULL);
if (!repl)
return SCTP_DISPOSITION_NOMEM;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index fb1821d..0ea947e 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -5426,7 +5426,7 @@
return err;
do_error:
- if (asoc->init_err_counter + 1 >= asoc->max_init_attempts)
+ if (asoc->init_err_counter + 1 > asoc->max_init_attempts)
err = -ETIMEDOUT;
else
err = -ECONNREFUSED;
diff --git a/security/seclvl.c b/security/seclvl.c
index 1caac01..8529ea6 100644
--- a/security/seclvl.c
+++ b/security/seclvl.c
@@ -368,8 +368,8 @@
*/
static int seclvl_settime(struct timespec *tv, struct timezone *tz)
{
- struct timespec now;
- if (seclvl > 1) {
+ if (tv && seclvl > 1) {
+ struct timespec now;
now = current_kernel_time();
if (tv->tv_sec < now.tv_sec ||
(tv->tv_sec == now.tv_sec && tv->tv_nsec < now.tv_nsec)) {
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
index b963c55..bdee050 100644
--- a/sound/oss/au1550_ac97.c
+++ b/sound/oss/au1550_ac97.c
@@ -462,7 +462,7 @@
/* Wait for Transmit Busy to show disabled.
*/
do {
- stat = readl((void *)PSC_AC97STAT);
+ stat = au_readl(PSC_AC97STAT);
au_sync();
} while ((stat & PSC_AC97STAT_TB) != 0);
@@ -491,7 +491,7 @@
/* Wait for Receive Busy to show disabled.
*/
do {
- stat = readl((void *)PSC_AC97STAT);
+ stat = au_readl(PSC_AC97STAT);
au_sync();
} while ((stat & PSC_AC97STAT_RB) != 0);
@@ -541,7 +541,7 @@
/* Wait for Device ready.
*/
do {
- stat = readl((void *)PSC_AC97STAT);
+ stat = au_readl(PSC_AC97STAT);
au_sync();
} while ((stat & PSC_AC97STAT_DR) == 0);
}
@@ -573,7 +573,7 @@
/* Wait for Device ready.
*/
do {
- stat = readl((void *)PSC_AC97STAT);
+ stat = au_readl(PSC_AC97STAT);
au_sync();
} while ((stat & PSC_AC97STAT_DR) == 0);
}
@@ -1995,7 +1995,7 @@
/* Wait for PSC ready.
*/
do {
- val = readl((void *)PSC_AC97STAT);
+ val = au_readl(PSC_AC97STAT);
au_sync();
} while ((val & PSC_AC97STAT_SR) == 0);
@@ -2018,7 +2018,7 @@
/* Wait for Device ready.
*/
do {
- val = readl((void *)PSC_AC97STAT);
+ val = au_readl(PSC_AC97STAT);
au_sync();
} while ((val & PSC_AC97STAT_DR) == 0);