ARM: dts: Leave Exynos5250 SPI controller disabled by default
Rather than requiring each board to explicitly disable the SPI controllers
it is not using instead require boards to enable those that they are using.
This is less work overall since normally at most one of the controllers is
in use and avoids issues caused by inappropriate pinmuxing.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index 2dd70e9..ddaa61a 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -279,19 +279,12 @@
};
};
- spi_0: spi@12d20000 {
- status = "disabled";
- };
-
spi_1: spi@12d30000 {
+ status = "okay";
samsung,spi-src-clk = <0>;
num-cs = <1>;
};
- spi_2: spi@12d40000 {
- status = "disabled";
- };
-
hdmi {
hpd-gpio = <&gpx3 7 0>;
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6e30c39..a1b88c9 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -428,18 +428,6 @@
status = "okay";
};
- spi_0: spi@12d20000 {
- status = "disabled";
- };
-
- spi_1: spi@12d30000 {
- status = "disabled";
- };
-
- spi_2: spi@12d40000 {
- status = "disabled";
- };
-
gpio_keys {
compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index f079c4c..66be827 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -184,6 +184,8 @@
};
spi_1: spi@12d30000 {
+ status = "okay";
+
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -209,10 +211,6 @@
};
};
- spi_2: spi@12d40000 {
- status = "disabled";
- };
-
hdmi {
hpd-gpio = <&gpx3 7 0>;
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 108739a..14c4f63 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -351,6 +351,7 @@
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
+ status = "disabled";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
dmas = <&pdma0 5
@@ -366,6 +367,7 @@
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
+ status = "disabled";
reg = <0x12d30000 0x100>;
interrupts = <0 67 0>;
dmas = <&pdma1 5
@@ -381,6 +383,7 @@
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
+ status = "disabled";
reg = <0x12d40000 0x100>;
interrupts = <0 68 0>;
dmas = <&pdma0 7