| /* |
| * ALPS touchpad PS/2 mouse driver |
| * |
| * Copyright (c) 2003 Peter Osterlund <petero2@telia.com> |
| * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #ifndef _ALPS_H |
| #define _ALPS_H |
| |
| #include <linux/input/mt.h> |
| |
| #define ALPS_PROTO_V1 0x100 |
| #define ALPS_PROTO_V2 0x200 |
| #define ALPS_PROTO_V3 0x300 |
| #define ALPS_PROTO_V3_RUSHMORE 0x310 |
| #define ALPS_PROTO_V4 0x400 |
| #define ALPS_PROTO_V5 0x500 |
| #define ALPS_PROTO_V6 0x600 |
| #define ALPS_PROTO_V7 0x700 /* t3btl t4s */ |
| |
| #define MAX_TOUCHES 2 |
| |
| #define DOLPHIN_COUNT_PER_ELECTRODE 64 |
| #define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ |
| #define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ |
| |
| /* |
| * enum V7_PACKET_ID - defines the packet type for V7 |
| * V7_PACKET_ID_IDLE: There's no finger and no button activity. |
| * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad |
| * or there's button activities. |
| * V7_PACKET_ID_MULTI: There are at least three non-resting fingers. |
| * V7_PACKET_ID_NEW: The finger position in slot is not continues from |
| * previous packet. |
| */ |
| enum V7_PACKET_ID { |
| V7_PACKET_ID_IDLE, |
| V7_PACKET_ID_TWO, |
| V7_PACKET_ID_MULTI, |
| V7_PACKET_ID_NEW, |
| V7_PACKET_ID_UNKNOWN, |
| }; |
| |
| /** |
| * struct alps_model_info - touchpad ID table |
| * @signature: E7 response string to match. |
| * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response |
| * (aka command mode response) identifies the firmware minor version. This |
| * can be used to distinguish different hardware models which are not |
| * uniquely identifiable through their E7 responses. |
| * @proto_version: Indicates V1/V2/V3/... |
| * @byte0: Helps figure out whether a position report packet matches the |
| * known format for this model. The first byte of the report, ANDed with |
| * mask0, should match byte0. |
| * @mask0: The mask used to check the first byte of the report. |
| * @flags: Additional device capabilities (passthrough port, trackstick, etc.). |
| * |
| * Many (but not all) ALPS touchpads can be identified by looking at the |
| * values returned in the "E7 report" and/or the "EC report." This table |
| * lists a number of such touchpads. |
| */ |
| struct alps_model_info { |
| u8 signature[3]; |
| u8 command_mode_resp; |
| u16 proto_version; |
| u8 byte0, mask0; |
| unsigned int flags; |
| }; |
| |
| /** |
| * struct alps_nibble_commands - encodings for register accesses |
| * @command: PS/2 command used for the nibble |
| * @data: Data supplied as an argument to the PS/2 command, if applicable |
| * |
| * The ALPS protocol uses magic sequences to transmit binary data to the |
| * touchpad, as it is generally not OK to send arbitrary bytes out the |
| * PS/2 port. Each of the sequences in this table sends one nibble of the |
| * register address or (write) data. Different versions of the ALPS protocol |
| * use slightly different encodings. |
| */ |
| struct alps_nibble_commands { |
| int command; |
| unsigned char data; |
| }; |
| |
| struct alps_bitmap_point { |
| int start_bit; |
| int num_bits; |
| }; |
| |
| /** |
| * struct alps_fields - decoded version of the report packet |
| * @x_map: Bitmap of active X positions for MT. |
| * @y_map: Bitmap of active Y positions for MT. |
| * @fingers: Number of fingers for MT. |
| * @pressure: Pressure. |
| * @st: position for ST. |
| * @mt: position for MT. |
| * @first_mp: Packet is the first of a multi-packet report. |
| * @is_mp: Packet is part of a multi-packet report. |
| * @left: Left touchpad button is active. |
| * @right: Right touchpad button is active. |
| * @middle: Middle touchpad button is active. |
| * @ts_left: Left trackstick button is active. |
| * @ts_right: Right trackstick button is active. |
| * @ts_middle: Middle trackstick button is active. |
| */ |
| struct alps_fields { |
| unsigned int x_map; |
| unsigned int y_map; |
| unsigned int fingers; |
| |
| int pressure; |
| struct input_mt_pos st; |
| struct input_mt_pos mt[MAX_TOUCHES]; |
| |
| unsigned int first_mp:1; |
| unsigned int is_mp:1; |
| |
| unsigned int left:1; |
| unsigned int right:1; |
| unsigned int middle:1; |
| |
| unsigned int ts_left:1; |
| unsigned int ts_right:1; |
| unsigned int ts_middle:1; |
| }; |
| |
| /** |
| * struct alps_data - private data structure for the ALPS driver |
| * @dev2: "Relative" device used to report trackstick or mouse activity. |
| * @phys: Physical path for the relative device. |
| * @nibble_commands: Command mapping used for touchpad register accesses. |
| * @addr_command: Command used to tell the touchpad that a register address |
| * follows. |
| * @proto_version: Indicates V1/V2/V3/... |
| * @byte0: Helps figure out whether a position report packet matches the |
| * known format for this model. The first byte of the report, ANDed with |
| * mask0, should match byte0. |
| * @mask0: The mask used to check the first byte of the report. |
| * @fw_ver: cached copy of firmware version (EC report) |
| * @flags: Additional device capabilities (passthrough port, trackstick, etc.). |
| * @x_max: Largest possible X position value. |
| * @y_max: Largest possible Y position value. |
| * @x_bits: Number of X bits in the MT bitmap. |
| * @y_bits: Number of Y bits in the MT bitmap. |
| * @hw_init: Protocol-specific hardware init function. |
| * @process_packet: Protocol-specific function to process a report packet. |
| * @decode_fields: Protocol-specific function to read packet bitfields. |
| * @set_abs_params: Protocol-specific function to configure the input_dev. |
| * @prev_fin: Finger bit from previous packet. |
| * @multi_packet: Multi-packet data in progress. |
| * @multi_data: Saved multi-packet data. |
| * @f: Decoded packet data fields. |
| * @quirks: Bitmap of ALPS_QUIRK_*. |
| * @timer: Timer for flushing out the final report packet in the stream. |
| */ |
| struct alps_data { |
| struct input_dev *dev2; |
| char phys[32]; |
| |
| /* these are autodetected when the device is identified */ |
| const struct alps_nibble_commands *nibble_commands; |
| int addr_command; |
| u16 proto_version; |
| u8 byte0, mask0; |
| u8 fw_ver[3]; |
| int flags; |
| int x_max; |
| int y_max; |
| int x_bits; |
| int y_bits; |
| unsigned int x_res; |
| unsigned int y_res; |
| |
| int (*hw_init)(struct psmouse *psmouse); |
| void (*process_packet)(struct psmouse *psmouse); |
| int (*decode_fields)(struct alps_fields *f, unsigned char *p, |
| struct psmouse *psmouse); |
| void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); |
| |
| int prev_fin; |
| int multi_packet; |
| unsigned char multi_data[6]; |
| struct alps_fields f; |
| u8 quirks; |
| struct timer_list timer; |
| }; |
| |
| #define ALPS_QUIRK_TRACKSTICK_BUTTONS 1 /* trakcstick buttons in trackstick packet */ |
| |
| #ifdef CONFIG_MOUSE_PS2_ALPS |
| int alps_detect(struct psmouse *psmouse, bool set_properties); |
| int alps_init(struct psmouse *psmouse); |
| #else |
| inline int alps_detect(struct psmouse *psmouse, bool set_properties) |
| { |
| return -ENOSYS; |
| } |
| inline int alps_init(struct psmouse *psmouse) |
| { |
| return -ENOSYS; |
| } |
| #endif /* CONFIG_MOUSE_PS2_ALPS */ |
| |
| #endif |