| /* |
| * linux/arch/arm/mach-pxa/littleton.c |
| * |
| * Support for the Marvell Littleton Development Platform. |
| * |
| * Author: Jason Chagas (largely modified code) |
| * Created: Nov 20, 2006 |
| * Copyright: (C) Copyright 2006 Marvell International Ltd. |
| * |
| * 2007-11-22 modified to align with latest kernel |
| * eric miao <eric.miao@marvell.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * publishhed by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| |
| #include <asm/types.h> |
| #include <asm/setup.h> |
| #include <asm/memory.h> |
| #include <asm/mach-types.h> |
| #include <asm/hardware.h> |
| #include <asm/irq.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| |
| #include <asm/arch/pxa-regs.h> |
| #include <asm/arch/mfp-pxa300.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/pxafb.h> |
| #include <asm/arch/ssp.h> |
| #include <asm/arch/pxa27x_keypad.h> |
| #include <asm/arch/littleton.h> |
| |
| #include "generic.h" |
| |
| /* Littleton MFP configurations */ |
| static mfp_cfg_t littleton_mfp_cfg[] __initdata = { |
| /* LCD */ |
| GPIO54_LCD_LDD_0, |
| GPIO55_LCD_LDD_1, |
| GPIO56_LCD_LDD_2, |
| GPIO57_LCD_LDD_3, |
| GPIO58_LCD_LDD_4, |
| GPIO59_LCD_LDD_5, |
| GPIO60_LCD_LDD_6, |
| GPIO61_LCD_LDD_7, |
| GPIO62_LCD_LDD_8, |
| GPIO63_LCD_LDD_9, |
| GPIO64_LCD_LDD_10, |
| GPIO65_LCD_LDD_11, |
| GPIO66_LCD_LDD_12, |
| GPIO67_LCD_LDD_13, |
| GPIO68_LCD_LDD_14, |
| GPIO69_LCD_LDD_15, |
| GPIO70_LCD_LDD_16, |
| GPIO71_LCD_LDD_17, |
| GPIO72_LCD_FCLK, |
| GPIO73_LCD_LCLK, |
| GPIO74_LCD_PCLK, |
| GPIO75_LCD_BIAS, |
| |
| /* SSP2 */ |
| GPIO25_SSP2_SCLK, |
| GPIO17_SSP2_FRM, |
| GPIO27_SSP2_TXD, |
| |
| /* Debug Ethernet */ |
| GPIO90_GPIO, |
| |
| /* Keypad */ |
| GPIO107_KP_DKIN_0, |
| GPIO108_KP_DKIN_1, |
| GPIO115_KP_MKIN_0, |
| GPIO116_KP_MKIN_1, |
| GPIO117_KP_MKIN_2, |
| GPIO118_KP_MKIN_3, |
| GPIO119_KP_MKIN_4, |
| GPIO120_KP_MKIN_5, |
| GPIO121_KP_MKOUT_0, |
| GPIO122_KP_MKOUT_1, |
| GPIO123_KP_MKOUT_2, |
| GPIO124_KP_MKOUT_3, |
| GPIO125_KP_MKOUT_4, |
| }; |
| |
| static struct resource smc91x_resources[] = { |
| [0] = { |
| .start = (LITTLETON_ETH_PHYS + 0x300), |
| .end = (LITTLETON_ETH_PHYS + 0xfffff), |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), |
| .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), |
| .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, |
| } |
| }; |
| |
| static struct platform_device smc91x_device = { |
| .name = "smc91x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smc91x_resources), |
| .resource = smc91x_resources, |
| }; |
| |
| #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES) |
| /* use bit 30, 31 as the indicator of command parameter number */ |
| #define CMD0(x) ((0x00000000) | ((x) << 9)) |
| #define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1)) |
| #define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\ |
| ((x1) << 9) | 0x100 | (x2)) |
| |
| static uint32_t lcd_panel_reset[] = { |
| CMD0(0x1), /* reset */ |
| CMD0(0x0), /* nop */ |
| CMD0(0x0), /* nop */ |
| CMD0(0x0), /* nop */ |
| }; |
| |
| static uint32_t lcd_panel_on[] = { |
| CMD0(0x29), /* Display ON */ |
| CMD2(0xB8, 0xFF, 0xF9), /* Output Control */ |
| CMD0(0x11), /* Sleep out */ |
| CMD1(0xB0, 0x16), /* Wake */ |
| }; |
| |
| static uint32_t lcd_panel_off[] = { |
| CMD0(0x28), /* Display OFF */ |
| CMD2(0xB8, 0x80, 0x02), /* Output Control */ |
| CMD0(0x10), /* Sleep in */ |
| CMD1(0xB0, 0x00), /* Deep stand by in */ |
| }; |
| |
| static uint32_t lcd_vga_pass_through[] = { |
| CMD1(0xB0, 0x16), |
| CMD1(0xBC, 0x80), |
| CMD1(0xE1, 0x00), |
| CMD1(0x36, 0x50), |
| CMD1(0x3B, 0x00), |
| }; |
| |
| static uint32_t lcd_qvga_pass_through[] = { |
| CMD1(0xB0, 0x16), |
| CMD1(0xBC, 0x81), |
| CMD1(0xE1, 0x00), |
| CMD1(0x36, 0x50), |
| CMD1(0x3B, 0x22), |
| }; |
| |
| static uint32_t lcd_vga_transfer[] = { |
| CMD1(0xcf, 0x02), /* Blanking period control (1) */ |
| CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */ |
| CMD1(0xd1, 0x01), /* CKV timing control on/off */ |
| CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */ |
| CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */ |
| CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */ |
| CMD1(0xd5, 0x14), /* ASW timing control (2) */ |
| CMD0(0x21), /* Invert for normally black display */ |
| CMD0(0x29), /* Display on */ |
| }; |
| |
| static uint32_t lcd_qvga_transfer[] = { |
| CMD1(0xd6, 0x02), /* Blanking period control (1) */ |
| CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */ |
| CMD1(0xd8, 0x01), /* CKV timing control on/off */ |
| CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */ |
| CMD2(0xde, 0x05, 0x0a), /* OEV timing control */ |
| CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */ |
| CMD1(0xe0, 0x0a), /* ASW timing control (2) */ |
| CMD0(0x21), /* Invert for normally black display */ |
| CMD0(0x29), /* Display on */ |
| }; |
| |
| static uint32_t lcd_panel_config[] = { |
| CMD2(0xb8, 0xff, 0xf9), /* Output control */ |
| CMD0(0x11), /* sleep out */ |
| CMD1(0xba, 0x01), /* Display mode (1) */ |
| CMD1(0xbb, 0x00), /* Display mode (2) */ |
| CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */ |
| CMD1(0xbf, 0x10), /* Drive system change control */ |
| CMD1(0xb1, 0x56), /* Booster operation setup */ |
| CMD1(0xb2, 0x33), /* Booster mode setup */ |
| CMD1(0xb3, 0x11), /* Booster frequency setup */ |
| CMD1(0xb4, 0x02), /* Op amp/system clock */ |
| CMD1(0xb5, 0x35), /* VCS voltage */ |
| CMD1(0xb6, 0x40), /* VCOM voltage */ |
| CMD1(0xb7, 0x03), /* External display signal */ |
| CMD1(0xbd, 0x00), /* ASW slew rate */ |
| CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */ |
| CMD1(0xc0, 0x11), /* Sleep out FR count (A) */ |
| CMD1(0xc1, 0x11), /* Sleep out FR count (B) */ |
| CMD1(0xc2, 0x11), /* Sleep out FR count (C) */ |
| CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */ |
| CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */ |
| CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */ |
| CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */ |
| CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */ |
| CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */ |
| CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */ |
| CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */ |
| CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */ |
| }; |
| |
| static void ssp_reconfig(struct ssp_dev *dev, int nparam) |
| { |
| static int last_nparam = -1; |
| |
| /* check if it is necessary to re-config SSP */ |
| if (nparam == last_nparam) |
| return; |
| |
| ssp_disable(dev); |
| ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0); |
| |
| last_nparam = nparam; |
| } |
| |
| static void ssp_send_cmd(uint32_t *cmd, int num) |
| { |
| static int ssp_initialized; |
| static struct ssp_dev ssp2; |
| |
| int i; |
| |
| if (!ssp_initialized) { |
| ssp_init(&ssp2, 2, SSP_NO_IRQ); |
| ssp_initialized = 1; |
| } |
| |
| clk_enable(ssp2.ssp->clk); |
| for (i = 0; i < num; i++, cmd++) { |
| ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3); |
| ssp_write_word(&ssp2, *cmd & 0x3fffffff); |
| |
| /* FIXME: ssp_flush() is mandatory here to work */ |
| ssp_flush(&ssp2); |
| } |
| clk_disable(ssp2.ssp->clk); |
| } |
| |
| static void littleton_lcd_power(int on, struct fb_var_screeninfo *var) |
| { |
| if (on) { |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on)); |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset)); |
| if (var->xres > 240) { |
| /* VGA */ |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through)); |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config)); |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer)); |
| } else { |
| /* QVGA */ |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through)); |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config)); |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer)); |
| } |
| } else |
| ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off)); |
| } |
| |
| static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = { |
| [0] = { |
| /* VGA */ |
| .pixclock = 38250, |
| .xres = 480, |
| .yres = 640, |
| .bpp = 16, |
| .hsync_len = 8, |
| .left_margin = 8, |
| .right_margin = 24, |
| .vsync_len = 2, |
| .upper_margin = 2, |
| .lower_margin = 4, |
| .sync = 0, |
| }, |
| [1] = { |
| /* QVGA */ |
| .pixclock = 153000, |
| .xres = 240, |
| .yres = 320, |
| .bpp = 16, |
| .hsync_len = 8, |
| .left_margin = 8, |
| .right_margin = 88, |
| .vsync_len = 2, |
| .upper_margin = 2, |
| .lower_margin = 2, |
| .sync = 0, |
| }, |
| }; |
| |
| static struct pxafb_mach_info littleton_lcd_info = { |
| .modes = tpo_tdo24mtea1_modes, |
| .num_modes = 2, |
| .lccr0 = LCCR0_Act, |
| .lccr3 = LCCR3_HSP | LCCR3_VSP, |
| .pxafb_lcd_power = littleton_lcd_power, |
| }; |
| |
| static void littleton_init_lcd(void) |
| { |
| set_pxa_fb_info(&littleton_lcd_info); |
| } |
| #else |
| static inline void littleton_init_lcd(void) {}; |
| #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */ |
| |
| #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) |
| static unsigned int littleton_matrix_key_map[] = { |
| /* KEY(row, col, key_code) */ |
| KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3), |
| KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7), |
| KEY(1, 2, KEY_8), KEY(2, 2, KEY_9), |
| |
| KEY(0, 3, KEY_KPASTERISK), /* * */ |
| KEY(2, 3, KEY_KPDOT), /* # */ |
| |
| KEY(5, 4, KEY_ENTER), |
| |
| KEY(5, 0, KEY_UP), |
| KEY(5, 1, KEY_DOWN), |
| KEY(5, 2, KEY_LEFT), |
| KEY(5, 3, KEY_RIGHT), |
| KEY(3, 2, KEY_HOME), |
| KEY(4, 1, KEY_END), |
| KEY(3, 3, KEY_BACK), |
| |
| KEY(4, 0, KEY_SEND), |
| KEY(4, 2, KEY_VOLUMEUP), |
| KEY(4, 3, KEY_VOLUMEDOWN), |
| |
| KEY(3, 0, KEY_F22), /* soft1 */ |
| KEY(3, 1, KEY_F23), /* soft2 */ |
| }; |
| |
| static struct pxa27x_keypad_platform_data littleton_keypad_info = { |
| .matrix_key_rows = 6, |
| .matrix_key_cols = 5, |
| .matrix_key_map = littleton_matrix_key_map, |
| .matrix_key_map_size = ARRAY_SIZE(littleton_matrix_key_map), |
| |
| .enable_rotary0 = 1, |
| .rotary0_up_key = KEY_UP, |
| .rotary0_down_key = KEY_DOWN, |
| |
| .debounce_interval = 30, |
| }; |
| static void __init littleton_init_keypad(void) |
| { |
| pxa_set_keypad_info(&littleton_keypad_info); |
| } |
| #else |
| static inline void littleton_init_keypad(void) {} |
| #endif |
| |
| static void __init littleton_init(void) |
| { |
| /* initialize MFP configurations */ |
| pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg)); |
| |
| /* |
| * Note: we depend bootloader set the correct |
| * value to MSC register for SMC91x. |
| */ |
| platform_device_register(&smc91x_device); |
| |
| littleton_init_lcd(); |
| littleton_init_keypad(); |
| } |
| |
| MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)") |
| .phys_io = 0x40000000, |
| .boot_params = 0xa0000100, |
| .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| .map_io = pxa_map_io, |
| .init_irq = pxa3xx_init_irq, |
| .timer = &pxa_timer, |
| .init_machine = littleton_init, |
| MACHINE_END |