| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /dts-v1/; |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/clock/qcom,gcc-ipq4019.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. IPQ4019"; |
| compatible = "qcom,ipq4019"; |
| interrupt-parent = <&intc>; |
| |
| aliases { |
| spi0 = &spi_0; |
| i2c0 = &i2c_0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| enable-method = "qcom,kpss-acc-v1"; |
| qcom,acc = <&acc0>; |
| qcom,saw = <&saw0>; |
| reg = <0x0>; |
| clocks = <&gcc GCC_APPS_CLK_SRC>; |
| clock-frequency = <0>; |
| operating-points = < |
| /* kHz uV (fixed) */ |
| 48000 1100000 |
| 200000 1100000 |
| 500000 1100000 |
| 666000 1100000 |
| >; |
| clock-latency = <256000>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| enable-method = "qcom,kpss-acc-v1"; |
| qcom,acc = <&acc1>; |
| qcom,saw = <&saw1>; |
| reg = <0x1>; |
| clocks = <&gcc GCC_APPS_CLK_SRC>; |
| clock-frequency = <0>; |
| }; |
| |
| cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| enable-method = "qcom,kpss-acc-v1"; |
| qcom,acc = <&acc2>; |
| qcom,saw = <&saw2>; |
| reg = <0x2>; |
| clocks = <&gcc GCC_APPS_CLK_SRC>; |
| clock-frequency = <0>; |
| }; |
| |
| cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| enable-method = "qcom,kpss-acc-v1"; |
| qcom,acc = <&acc3>; |
| qcom,saw = <&saw3>; |
| reg = <0x3>; |
| clocks = <&gcc GCC_APPS_CLK_SRC>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| clocks { |
| sleep_clk: sleep_clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "simple-bus"; |
| |
| intc: interrupt-controller@b000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x0b000000 0x1000>, |
| <0x0b002000 0x1000>; |
| }; |
| |
| gcc: clock-controller@1800000 { |
| compatible = "qcom,gcc-ipq4019"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| reg = <0x1800000 0x60000>; |
| }; |
| |
| tlmm: pinctrl@0x01000000 { |
| compatible = "qcom,ipq4019-pinctrl"; |
| reg = <0x01000000 0x300000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 208 0>; |
| }; |
| |
| spi_0: spi@78b5000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x78b5000 0x600>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c_0: i2c@78b7000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x78b7000 0x6000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| |
| cryptobam: dma@8e04000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x08e04000 0x20000>; |
| interrupts = <GIC_SPI 207 0>; |
| clocks = <&gcc GCC_CRYPTO_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <1>; |
| qcom,controlled-remotely; |
| status = "disabled"; |
| }; |
| |
| crypto@8e3a000 { |
| compatible = "qcom,crypto-v5.1"; |
| reg = <0x08e3a000 0x6000>; |
| clocks = <&gcc GCC_CRYPTO_AHB_CLK>, |
| <&gcc GCC_CRYPTO_AXI_CLK>, |
| <&gcc GCC_CRYPTO_CLK>; |
| clock-names = "iface", "bus", "core"; |
| dmas = <&cryptobam 2>, <&cryptobam 3>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| acc0: clock-controller@b088000 { |
| compatible = "qcom,kpss-acc-v1"; |
| reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; |
| }; |
| |
| acc1: clock-controller@b098000 { |
| compatible = "qcom,kpss-acc-v1"; |
| reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; |
| }; |
| |
| acc2: clock-controller@b0a8000 { |
| compatible = "qcom,kpss-acc-v1"; |
| reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; |
| }; |
| |
| acc3: clock-controller@b0b8000 { |
| compatible = "qcom,kpss-acc-v1"; |
| reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; |
| }; |
| |
| saw0: regulator@b089000 { |
| compatible = "qcom,saw2"; |
| reg = <0x02089000 0x1000>, <0x0b009000 0x1000>; |
| regulator; |
| }; |
| |
| saw1: regulator@b099000 { |
| compatible = "qcom,saw2"; |
| reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; |
| regulator; |
| }; |
| |
| saw2: regulator@b0a9000 { |
| compatible = "qcom,saw2"; |
| reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; |
| regulator; |
| }; |
| |
| saw3: regulator@b0b9000 { |
| compatible = "qcom,saw2"; |
| reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; |
| regulator; |
| }; |
| |
| serial@78af000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x78af000 0x200>; |
| interrupts = <0 107 0>; |
| status = "disabled"; |
| clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| }; |
| |
| serial@78b0000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x78b0000 0x200>; |
| interrupts = <0 108 0>; |
| status = "disabled"; |
| clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| }; |
| |
| watchdog@b017000 { |
| compatible = "qcom,kpss-standalone"; |
| reg = <0xb017000 0x40>; |
| clocks = <&sleep_clk>; |
| timeout-sec = <10>; |
| status = "disabled"; |
| }; |
| |
| restart@4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0x4ab000 0x4>; |
| }; |
| }; |
| }; |