Merge branch 'for-usb-linus' of master.kernel.org:/pub/scm/linux/kernel/git/sarah/xhci into usb-linus
* 'for-usb-linus' of master.kernel.org:/pub/scm/linux/kernel/git/sarah/xhci:
xhci: Remove more doorbell-related reads
xHCI: fix printk_ratelimit() usage
xHCI: replace dev_dbg() with xhci_dbg()
xHCI: fix cycle bit set in giveback_first_trb()
xHCI: remove redundant parameter in giveback_first_trb()
xHCI: fix queue_trb in isoc transfer
xhci: Use GFP_NOIO during device reset.
usb: Realloc xHCI structures after a hub is verified.
xhci: Do not run xhci_cleanup_msix with irq disabled
xHCI: synchronize irq in xhci_suspend()
xhci: Resume bus on any port status change.
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index b55d460..f71e8e3 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -405,7 +405,12 @@
return retval;
}
- synchronize_irq(pci_dev->irq);
+ /* If MSI-X is enabled, the driver will have synchronized all vectors
+ * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
+ * synchronized here.
+ */
+ if (!hcd->msix_enabled)
+ synchronize_irq(pci_dev->irq);
/* Downstream ports from this root hub should already be quiesced, so
* there will be no DMA activity. Now we can shut down the upstream
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b98efae..4310cc4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -676,6 +676,8 @@
static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
{
struct usb_device *hdev = hub->hdev;
+ struct usb_hcd *hcd;
+ int ret;
int port1;
int status;
bool need_debounce_delay = false;
@@ -714,6 +716,25 @@
usb_autopm_get_interface_no_resume(
to_usb_interface(hub->intfdev));
return; /* Continues at init2: below */
+ } else if (type == HUB_RESET_RESUME) {
+ /* The internal host controller state for the hub device
+ * may be gone after a host power loss on system resume.
+ * Update the device's info so the HW knows it's a hub.
+ */
+ hcd = bus_to_hcd(hdev->bus);
+ if (hcd->driver->update_hub_device) {
+ ret = hcd->driver->update_hub_device(hcd, hdev,
+ &hub->tt, GFP_NOIO);
+ if (ret < 0) {
+ dev_err(hub->intfdev, "Host not "
+ "accepting hub info "
+ "update.\n");
+ dev_err(hub->intfdev, "LS/FS devices "
+ "and hubs may not work "
+ "under this hub\n.");
+ }
+ }
+ hub_power_on(hub, true);
} else {
hub_power_on(hub, true);
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index df558f6..3e8211c 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -308,11 +308,8 @@
/* Ring the host controller doorbell after placing a command on the ring */
void xhci_ring_cmd_db(struct xhci_hcd *xhci)
{
- u32 temp;
-
xhci_dbg(xhci, "// Ding dong!\n");
- temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK;
- xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]);
+ xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
/* Flush PCI posted writes */
xhci_readl(xhci, &xhci->dba->doorbell[0]);
}
@@ -322,26 +319,24 @@
unsigned int ep_index,
unsigned int stream_id)
{
- struct xhci_virt_ep *ep;
- unsigned int ep_state;
- u32 field;
__u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
+ struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
+ unsigned int ep_state = ep->ep_state;
- ep = &xhci->devs[slot_id]->eps[ep_index];
- ep_state = ep->ep_state;
/* Don't ring the doorbell for this endpoint if there are pending
- * cancellations because the we don't want to interrupt processing.
+ * cancellations because we don't want to interrupt processing.
* We don't want to restart any stream rings if there's a set dequeue
* pointer command pending because the device can choose to start any
* stream once the endpoint is on the HW schedule.
* FIXME - check all the stream rings for pending cancellations.
*/
- if (!(ep_state & EP_HALT_PENDING) && !(ep_state & SET_DEQ_PENDING)
- && !(ep_state & EP_HALTED)) {
- field = xhci_readl(xhci, db_addr) & DB_MASK;
- field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id);
- xhci_writel(xhci, field, db_addr);
- }
+ if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
+ (ep_state & EP_HALTED))
+ return;
+ xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr);
+ /* The CPU has better things to do at this point than wait for a
+ * write-posting flush. It'll get there soon enough.
+ */
}
/* Ring the doorbell for any rings with pending URBs */
@@ -1188,7 +1183,7 @@
addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1);
temp = xhci_readl(xhci, addr);
- if ((temp & PORT_CONNECT) && (hcd->state == HC_STATE_SUSPENDED)) {
+ if (hcd->state == HC_STATE_SUSPENDED) {
xhci_dbg(xhci, "resume root hub\n");
usb_hcd_resume_root_hub(hcd);
}
@@ -1710,8 +1705,7 @@
/* Others already handled above */
break;
}
- dev_dbg(&td->urb->dev->dev,
- "ep %#x - asked for %d bytes, "
+ xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
"%d bytes untransferred\n",
td->urb->ep->desc.bEndpointAddress,
td->urb->transfer_buffer_length,
@@ -2389,7 +2383,8 @@
}
xhci_dbg(xhci, "\n");
if (!in_interrupt())
- dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n",
+ xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, "
+ "num_trbs = %d\n",
urb->ep->desc.bEndpointAddress,
urb->transfer_buffer_length,
num_trbs);
@@ -2414,14 +2409,17 @@
static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
unsigned int ep_index, unsigned int stream_id, int start_cycle,
- struct xhci_generic_trb *start_trb, struct xhci_td *td)
+ struct xhci_generic_trb *start_trb)
{
/*
* Pass all the TRBs to the hardware at once and make sure this write
* isn't reordered.
*/
wmb();
- start_trb->field[3] |= start_cycle;
+ if (start_cycle)
+ start_trb->field[3] |= start_cycle;
+ else
+ start_trb->field[3] &= ~0x1;
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
}
@@ -2449,7 +2447,7 @@
* to set the polling interval (once the API is added).
*/
if (xhci_interval != ep_interval) {
- if (!printk_ratelimit())
+ if (printk_ratelimit())
dev_dbg(&urb->dev->dev, "Driver uses different interval"
" (%d microframe%s) than xHCI "
"(%d microframe%s)\n",
@@ -2551,9 +2549,11 @@
u32 remainder = 0;
/* Don't change the cycle bit of the first TRB until later */
- if (first_trb)
+ if (first_trb) {
first_trb = false;
- else
+ if (start_cycle == 0)
+ field |= 0x1;
+ } else
field |= ep_ring->cycle_state;
/* Chain all the TRBs together; clear the chain bit in the last
@@ -2625,7 +2625,7 @@
check_trb_math(urb, num_trbs, running_total);
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
- start_cycle, start_trb, td);
+ start_cycle, start_trb);
return 0;
}
@@ -2671,7 +2671,8 @@
/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
if (!in_interrupt())
- dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n",
+ xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), "
+ "addr = %#llx, num_trbs = %d\n",
urb->ep->desc.bEndpointAddress,
urb->transfer_buffer_length,
urb->transfer_buffer_length,
@@ -2711,9 +2712,11 @@
field = 0;
/* Don't change the cycle bit of the first TRB until later */
- if (first_trb)
+ if (first_trb) {
first_trb = false;
- else
+ if (start_cycle == 0)
+ field |= 0x1;
+ } else
field |= ep_ring->cycle_state;
/* Chain all the TRBs together; clear the chain bit in the last
@@ -2757,7 +2760,7 @@
check_trb_math(urb, num_trbs, running_total);
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
- start_cycle, start_trb, td);
+ start_cycle, start_trb);
return 0;
}
@@ -2818,13 +2821,17 @@
/* Queue setup TRB - see section 6.4.1.2.1 */
/* FIXME better way to translate setup_packet into two u32 fields? */
setup = (struct usb_ctrlrequest *) urb->setup_packet;
+ field = 0;
+ field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
+ if (start_cycle == 0)
+ field |= 0x1;
queue_trb(xhci, ep_ring, false, true,
/* FIXME endianness is probably going to bite my ass here. */
setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
setup->wIndex | setup->wLength << 16,
TRB_LEN(8) | TRB_INTR_TARGET(0),
/* Immediate data in pointer */
- TRB_IDT | TRB_TYPE(TRB_SETUP));
+ field);
/* If there's data, queue data TRBs */
field = 0;
@@ -2859,7 +2866,7 @@
field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
giveback_first_trb(xhci, slot_id, ep_index, 0,
- start_cycle, start_trb, td);
+ start_cycle, start_trb);
return 0;
}
@@ -2900,6 +2907,7 @@
int running_total, trb_buff_len, td_len, td_remain_len, ret;
u64 start_addr, addr;
int i, j;
+ bool more_trbs_coming;
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
@@ -2910,7 +2918,7 @@
}
if (!in_interrupt())
- dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d),"
+ xhci_dbg(xhci, "ep %#x - urb len = %#x (%d),"
" addr = %#llx, num_tds = %d\n",
urb->ep->desc.bEndpointAddress,
urb->transfer_buffer_length,
@@ -2950,7 +2958,10 @@
field |= TRB_TYPE(TRB_ISOC);
/* Assume URB_ISO_ASAP is set */
field |= TRB_SIA;
- if (i > 0)
+ if (i == 0) {
+ if (start_cycle == 0)
+ field |= 0x1;
+ } else
field |= ep_ring->cycle_state;
first_trb = false;
} else {
@@ -2965,9 +2976,11 @@
*/
if (j < trbs_per_td - 1) {
field |= TRB_CHAIN;
+ more_trbs_coming = true;
} else {
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
+ more_trbs_coming = false;
}
/* Calculate TRB length */
@@ -2980,7 +2993,7 @@
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
- queue_trb(xhci, ep_ring, false, false,
+ queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
@@ -3003,10 +3016,8 @@
}
}
- wmb();
- start_trb->field[3] |= start_cycle;
-
- xhci_ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id);
+ giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+ start_cycle, start_trb);
return 0;
}
@@ -3064,7 +3075,7 @@
* to set the polling interval (once the API is added).
*/
if (xhci_interval != ep_interval) {
- if (!printk_ratelimit())
+ if (printk_ratelimit())
dev_dbg(&urb->dev->dev, "Driver uses different interval"
" (%d microframe%s) than xHCI "
"(%d microframe%s)\n",
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 45e4a31..34cf4e1 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -226,7 +226,8 @@
static int xhci_setup_msix(struct xhci_hcd *xhci)
{
int i, ret = 0;
- struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
/*
* calculate number of msi-x vectors supported.
@@ -265,6 +266,7 @@
goto disable_msix;
}
+ hcd->msix_enabled = 1;
return ret;
disable_msix:
@@ -280,7 +282,8 @@
/* Free any IRQs and disable MSI-X */
static void xhci_cleanup_msix(struct xhci_hcd *xhci)
{
- struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
xhci_free_irq(xhci);
@@ -292,6 +295,7 @@
pci_disable_msi(pdev);
}
+ hcd->msix_enabled = 0;
return;
}
@@ -508,9 +512,10 @@
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
xhci_reset(xhci);
- xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
+ xhci_cleanup_msix(xhci);
+
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
/* Tell the event ring poll function not to reschedule */
xhci->zombie = 1;
@@ -544,9 +549,10 @@
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
- xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
+ xhci_cleanup_msix(xhci);
+
xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
xhci_readl(xhci, &xhci->op_regs->status));
}
@@ -647,6 +653,7 @@
int rc = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
u32 command;
+ int i;
spin_lock_irq(&xhci->lock);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -677,10 +684,15 @@
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
- /* step 5: remove core well power */
- xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
+ /* step 5: remove core well power */
+ /* synchronize irq when using MSI-X */
+ if (xhci->msix_entries) {
+ for (i = 0; i < xhci->msix_count; i++)
+ synchronize_irq(xhci->msix_entries[i].vector);
+ }
+
return rc;
}
@@ -694,7 +706,6 @@
{
u32 command, temp = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int old_state, retval;
old_state = hcd->state;
@@ -729,9 +740,8 @@
xhci_dbg(xhci, "Stop HCD\n");
xhci_halt(xhci);
xhci_reset(xhci);
- if (hibernated)
- xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
+ xhci_cleanup_msix(xhci);
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
/* Tell the event ring poll function not to reschedule */
@@ -765,30 +775,6 @@
return retval;
}
- spin_unlock_irq(&xhci->lock);
- /* Re-setup MSI-X */
- if (hcd->irq)
- free_irq(hcd->irq, hcd);
- hcd->irq = -1;
-
- retval = xhci_setup_msix(xhci);
- if (retval)
- /* fall back to msi*/
- retval = xhci_setup_msi(xhci);
-
- if (retval) {
- /* fall back to legacy interrupt*/
- retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
- hcd->irq_descr, hcd);
- if (retval) {
- xhci_err(xhci, "request interrupt %d failed\n",
- pdev->irq);
- return retval;
- }
- hcd->irq = pdev->irq;
- }
-
- spin_lock_irq(&xhci->lock);
/* step 4: set Run/Stop bit */
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_RUN;
@@ -2445,8 +2431,12 @@
xhci_err(xhci, "Error while assigning device slot ID\n");
return 0;
}
- /* xhci_alloc_virt_device() does not touch rings; no need to lock */
- if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+ /* xhci_alloc_virt_device() does not touch rings; no need to lock.
+ * Use GFP_NOIO, since this function can be called from
+ * xhci_discover_or_reset_device(), which may be called as part of
+ * mass storage driver error handling.
+ */
+ if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
/* Disable slot, if we can do it without mem alloc */
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
spin_lock_irqsave(&xhci->lock, flags);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 170c367..7f236fd 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -436,22 +436,18 @@
/**
* struct doorbell_array
*
+ * Bits 0 - 7: Endpoint target
+ * Bits 8 - 15: RsvdZ
+ * Bits 16 - 31: Stream ID
+ *
* Section 5.6
*/
struct xhci_doorbell_array {
u32 doorbell[256];
};
-#define DB_TARGET_MASK 0xFFFFFF00
-#define DB_STREAM_ID_MASK 0x0000FFFF
-#define DB_TARGET_HOST 0x0
-#define DB_STREAM_ID_HOST 0x0
-#define DB_MASK (0xff << 8)
-
-/* Endpoint Target - bits 0:7 */
-#define EPI_TO_DB(p) (((p) + 1) & 0xff)
-#define STREAM_ID_TO_DB(p) (((p) & 0xffff) << 16)
-
+#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
+#define DB_VALUE_HOST 0x00000000
/**
* struct xhci_protocol_caps
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index dd6ee49..a854fe8 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -112,6 +112,7 @@
/* Flags that get set only during HCD registration or removal. */
unsigned rh_registered:1;/* is root hub registered? */
unsigned rh_pollable:1; /* may we poll the root hub? */
+ unsigned msix_enabled:1; /* driver has MSI-X enabled? */
/* The next flag is a stopgap, to be removed when all the HCDs
* support the new root-hub polling mechanism. */