| /* |
| * linux/arch/arm/common/sa1111.c |
| * |
| * SA1111 support |
| * |
| * Original code by John Dorsey |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This file contains all generic SA1111 support. |
| * |
| * All initialization functions provided here are intended to be called |
| * from machine specific code with proper arguments when required. |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/mach-types.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/mach/irq.h> |
| #include <asm/sizes.h> |
| |
| #include <asm/hardware/sa1111.h> |
| |
| extern void __init sa1110_mb_enable(void); |
| |
| /* |
| * We keep the following data for the overall SA1111. Note that the |
| * struct device and struct resource are "fake"; they should be supplied |
| * by the bus above us. However, in the interests of getting all SA1111 |
| * drivers converted over to the device model, we provide this as an |
| * anchor point for all the other drivers. |
| */ |
| struct sa1111 { |
| struct device *dev; |
| struct clk *clk; |
| unsigned long phys; |
| int irq; |
| spinlock_t lock; |
| void __iomem *base; |
| }; |
| |
| /* |
| * We _really_ need to eliminate this. Its only users |
| * are the PWM and DMA checking code. |
| */ |
| static struct sa1111 *g_sa1111; |
| |
| struct sa1111_dev_info { |
| unsigned long offset; |
| unsigned long skpcr_mask; |
| unsigned int devid; |
| unsigned int irq[6]; |
| }; |
| |
| static struct sa1111_dev_info sa1111_devices[] = { |
| { |
| .offset = SA1111_USB, |
| .skpcr_mask = SKPCR_UCLKEN, |
| .devid = SA1111_DEVID_USB, |
| .irq = { |
| IRQ_USBPWR, |
| IRQ_HCIM, |
| IRQ_HCIBUFFACC, |
| IRQ_HCIRMTWKP, |
| IRQ_NHCIMFCIR, |
| IRQ_USB_PORT_RESUME |
| }, |
| }, |
| { |
| .offset = 0x0600, |
| .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN, |
| .devid = SA1111_DEVID_SAC, |
| .irq = { |
| AUDXMTDMADONEA, |
| AUDXMTDMADONEB, |
| AUDRCVDMADONEA, |
| AUDRCVDMADONEB |
| }, |
| }, |
| { |
| .offset = 0x0800, |
| .skpcr_mask = SKPCR_SCLKEN, |
| .devid = SA1111_DEVID_SSP, |
| }, |
| { |
| .offset = SA1111_KBD, |
| .skpcr_mask = SKPCR_PTCLKEN, |
| .devid = SA1111_DEVID_PS2, |
| .irq = { |
| IRQ_TPRXINT, |
| IRQ_TPTXINT |
| }, |
| }, |
| { |
| .offset = SA1111_MSE, |
| .skpcr_mask = SKPCR_PMCLKEN, |
| .devid = SA1111_DEVID_PS2, |
| .irq = { |
| IRQ_MSRXINT, |
| IRQ_MSTXINT |
| }, |
| }, |
| { |
| .offset = 0x1800, |
| .skpcr_mask = 0, |
| .devid = SA1111_DEVID_PCMCIA, |
| .irq = { |
| IRQ_S0_READY_NINT, |
| IRQ_S0_CD_VALID, |
| IRQ_S0_BVD1_STSCHG, |
| IRQ_S1_READY_NINT, |
| IRQ_S1_CD_VALID, |
| IRQ_S1_BVD1_STSCHG, |
| }, |
| }, |
| }; |
| |
| void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes) |
| { |
| unsigned int sz = SZ_1M >> PAGE_SHIFT; |
| |
| if (node != 0) |
| sz = 0; |
| |
| size[1] = size[0] - sz; |
| size[0] = sz; |
| } |
| |
| /* |
| * SA1111 interrupt support. Since clearing an IRQ while there are |
| * active IRQs causes the interrupt output to pulse, the upper levels |
| * will call us again if there are more interrupts to process. |
| */ |
| static void |
| sa1111_irq_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| unsigned int stat0, stat1, i; |
| void __iomem *base = get_irq_data(irq); |
| |
| stat0 = sa1111_readl(base + SA1111_INTSTATCLR0); |
| stat1 = sa1111_readl(base + SA1111_INTSTATCLR1); |
| |
| sa1111_writel(stat0, base + SA1111_INTSTATCLR0); |
| |
| desc->chip->ack(irq); |
| |
| sa1111_writel(stat1, base + SA1111_INTSTATCLR1); |
| |
| if (stat0 == 0 && stat1 == 0) { |
| do_bad_IRQ(irq, desc); |
| return; |
| } |
| |
| for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1) |
| if (stat0 & 1) |
| handle_edge_irq(i, irq_desc + i); |
| |
| for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1) |
| if (stat1 & 1) |
| handle_edge_irq(i, irq_desc + i); |
| |
| /* For level-based interrupts */ |
| desc->chip->unmask(irq); |
| } |
| |
| #define SA1111_IRQMASK_LO(x) (1 << (x - IRQ_SA1111_START)) |
| #define SA1111_IRQMASK_HI(x) (1 << (x - IRQ_SA1111_START - 32)) |
| |
| static void sa1111_ack_irq(unsigned int irq) |
| { |
| } |
| |
| static void sa1111_mask_lowirq(unsigned int irq) |
| { |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long ie0; |
| |
| ie0 = sa1111_readl(mapbase + SA1111_INTEN0); |
| ie0 &= ~SA1111_IRQMASK_LO(irq); |
| writel(ie0, mapbase + SA1111_INTEN0); |
| } |
| |
| static void sa1111_unmask_lowirq(unsigned int irq) |
| { |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long ie0; |
| |
| ie0 = sa1111_readl(mapbase + SA1111_INTEN0); |
| ie0 |= SA1111_IRQMASK_LO(irq); |
| sa1111_writel(ie0, mapbase + SA1111_INTEN0); |
| } |
| |
| /* |
| * Attempt to re-trigger the interrupt. The SA1111 contains a register |
| * (INTSET) which claims to do this. However, in practice no amount of |
| * manipulation of INTEN and INTSET guarantees that the interrupt will |
| * be triggered. In fact, its very difficult, if not impossible to get |
| * INTSET to re-trigger the interrupt. |
| */ |
| static int sa1111_retrigger_lowirq(unsigned int irq) |
| { |
| unsigned int mask = SA1111_IRQMASK_LO(irq); |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long ip0; |
| int i; |
| |
| ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); |
| for (i = 0; i < 8; i++) { |
| sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0); |
| sa1111_writel(ip0, mapbase + SA1111_INTPOL0); |
| if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask) |
| break; |
| } |
| |
| if (i == 8) |
| printk(KERN_ERR "Danger Will Robinson: failed to " |
| "re-trigger IRQ%d\n", irq); |
| return i == 8 ? -1 : 0; |
| } |
| |
| static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) |
| { |
| unsigned int mask = SA1111_IRQMASK_LO(irq); |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long ip0; |
| |
| if (flags == IRQT_PROBE) |
| return 0; |
| |
| if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) |
| return -EINVAL; |
| |
| ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); |
| if (flags & __IRQT_RISEDGE) |
| ip0 &= ~mask; |
| else |
| ip0 |= mask; |
| sa1111_writel(ip0, mapbase + SA1111_INTPOL0); |
| sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0); |
| |
| return 0; |
| } |
| |
| static int sa1111_wake_lowirq(unsigned int irq, unsigned int on) |
| { |
| unsigned int mask = SA1111_IRQMASK_LO(irq); |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long we0; |
| |
| we0 = sa1111_readl(mapbase + SA1111_WAKEEN0); |
| if (on) |
| we0 |= mask; |
| else |
| we0 &= ~mask; |
| sa1111_writel(we0, mapbase + SA1111_WAKEEN0); |
| |
| return 0; |
| } |
| |
| static struct irq_chip sa1111_low_chip = { |
| .name = "SA1111-l", |
| .ack = sa1111_ack_irq, |
| .mask = sa1111_mask_lowirq, |
| .unmask = sa1111_unmask_lowirq, |
| .retrigger = sa1111_retrigger_lowirq, |
| .set_type = sa1111_type_lowirq, |
| .set_wake = sa1111_wake_lowirq, |
| }; |
| |
| static void sa1111_mask_highirq(unsigned int irq) |
| { |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long ie1; |
| |
| ie1 = sa1111_readl(mapbase + SA1111_INTEN1); |
| ie1 &= ~SA1111_IRQMASK_HI(irq); |
| sa1111_writel(ie1, mapbase + SA1111_INTEN1); |
| } |
| |
| static void sa1111_unmask_highirq(unsigned int irq) |
| { |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long ie1; |
| |
| ie1 = sa1111_readl(mapbase + SA1111_INTEN1); |
| ie1 |= SA1111_IRQMASK_HI(irq); |
| sa1111_writel(ie1, mapbase + SA1111_INTEN1); |
| } |
| |
| /* |
| * Attempt to re-trigger the interrupt. The SA1111 contains a register |
| * (INTSET) which claims to do this. However, in practice no amount of |
| * manipulation of INTEN and INTSET guarantees that the interrupt will |
| * be triggered. In fact, its very difficult, if not impossible to get |
| * INTSET to re-trigger the interrupt. |
| */ |
| static int sa1111_retrigger_highirq(unsigned int irq) |
| { |
| unsigned int mask = SA1111_IRQMASK_HI(irq); |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long ip1; |
| int i; |
| |
| ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); |
| for (i = 0; i < 8; i++) { |
| sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1); |
| sa1111_writel(ip1, mapbase + SA1111_INTPOL1); |
| if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask) |
| break; |
| } |
| |
| if (i == 8) |
| printk(KERN_ERR "Danger Will Robinson: failed to " |
| "re-trigger IRQ%d\n", irq); |
| return i == 8 ? -1 : 0; |
| } |
| |
| static int sa1111_type_highirq(unsigned int irq, unsigned int flags) |
| { |
| unsigned int mask = SA1111_IRQMASK_HI(irq); |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long ip1; |
| |
| if (flags == IRQT_PROBE) |
| return 0; |
| |
| if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) |
| return -EINVAL; |
| |
| ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); |
| if (flags & __IRQT_RISEDGE) |
| ip1 &= ~mask; |
| else |
| ip1 |= mask; |
| sa1111_writel(ip1, mapbase + SA1111_INTPOL1); |
| sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1); |
| |
| return 0; |
| } |
| |
| static int sa1111_wake_highirq(unsigned int irq, unsigned int on) |
| { |
| unsigned int mask = SA1111_IRQMASK_HI(irq); |
| void __iomem *mapbase = get_irq_chip_data(irq); |
| unsigned long we1; |
| |
| we1 = sa1111_readl(mapbase + SA1111_WAKEEN1); |
| if (on) |
| we1 |= mask; |
| else |
| we1 &= ~mask; |
| sa1111_writel(we1, mapbase + SA1111_WAKEEN1); |
| |
| return 0; |
| } |
| |
| static struct irq_chip sa1111_high_chip = { |
| .name = "SA1111-h", |
| .ack = sa1111_ack_irq, |
| .mask = sa1111_mask_highirq, |
| .unmask = sa1111_unmask_highirq, |
| .retrigger = sa1111_retrigger_highirq, |
| .set_type = sa1111_type_highirq, |
| .set_wake = sa1111_wake_highirq, |
| }; |
| |
| static void sa1111_setup_irq(struct sa1111 *sachip) |
| { |
| void __iomem *irqbase = sachip->base + SA1111_INTC; |
| unsigned int irq; |
| |
| /* |
| * We're guaranteed that this region hasn't been taken. |
| */ |
| request_mem_region(sachip->phys + SA1111_INTC, 512, "irq"); |
| |
| /* disable all IRQs */ |
| sa1111_writel(0, irqbase + SA1111_INTEN0); |
| sa1111_writel(0, irqbase + SA1111_INTEN1); |
| sa1111_writel(0, irqbase + SA1111_WAKEEN0); |
| sa1111_writel(0, irqbase + SA1111_WAKEEN1); |
| |
| /* |
| * detect on rising edge. Note: Feb 2001 Errata for SA1111 |
| * specifies that S0ReadyInt and S1ReadyInt should be '1'. |
| */ |
| sa1111_writel(0, irqbase + SA1111_INTPOL0); |
| sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) | |
| SA1111_IRQMASK_HI(IRQ_S1_READY_NINT), |
| irqbase + SA1111_INTPOL1); |
| |
| /* clear all IRQs */ |
| sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0); |
| sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1); |
| |
| for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) { |
| set_irq_chip(irq, &sa1111_low_chip); |
| set_irq_chip_data(irq, irqbase); |
| set_irq_handler(irq, handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| } |
| |
| for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) { |
| set_irq_chip(irq, &sa1111_high_chip); |
| set_irq_chip_data(irq, irqbase); |
| set_irq_handler(irq, handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| } |
| |
| /* |
| * Register SA1111 interrupt |
| */ |
| set_irq_type(sachip->irq, IRQT_RISING); |
| set_irq_data(sachip->irq, irqbase); |
| set_irq_chained_handler(sachip->irq, sa1111_irq_handler); |
| } |
| |
| /* |
| * Bring the SA1111 out of reset. This requires a set procedure: |
| * 1. nRESET asserted (by hardware) |
| * 2. CLK turned on from SA1110 |
| * 3. nRESET deasserted |
| * 4. VCO turned on, PLL_BYPASS turned off |
| * 5. Wait lock time, then assert RCLKEn |
| * 7. PCR set to allow clocking of individual functions |
| * |
| * Until we've done this, the only registers we can access are: |
| * SBI_SKCR |
| * SBI_SMCR |
| * SBI_SKID |
| */ |
| static void sa1111_wake(struct sa1111 *sachip) |
| { |
| unsigned long flags, r; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| |
| clk_enable(sachip->clk); |
| |
| /* |
| * Turn VCO on, and disable PLL Bypass. |
| */ |
| r = sa1111_readl(sachip->base + SA1111_SKCR); |
| r &= ~SKCR_VCO_OFF; |
| sa1111_writel(r, sachip->base + SA1111_SKCR); |
| r |= SKCR_PLL_BYPASS | SKCR_OE_EN; |
| sa1111_writel(r, sachip->base + SA1111_SKCR); |
| |
| /* |
| * Wait lock time. SA1111 manual _doesn't_ |
| * specify a figure for this! We choose 100us. |
| */ |
| udelay(100); |
| |
| /* |
| * Enable RCLK. We also ensure that RDYEN is set. |
| */ |
| r |= SKCR_RCLKEN | SKCR_RDYEN; |
| sa1111_writel(r, sachip->base + SA1111_SKCR); |
| |
| /* |
| * Wait 14 RCLK cycles for the chip to finish coming out |
| * of reset. (RCLK=24MHz). This is 590ns. |
| */ |
| udelay(1); |
| |
| /* |
| * Ensure all clocks are initially off. |
| */ |
| sa1111_writel(0, sachip->base + SA1111_SKPCR); |
| |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| #ifdef CONFIG_ARCH_SA1100 |
| |
| static u32 sa1111_dma_mask[] = { |
| ~0, |
| ~(1 << 20), |
| ~(1 << 23), |
| ~(1 << 24), |
| ~(1 << 25), |
| ~(1 << 20), |
| ~(1 << 20), |
| 0, |
| }; |
| |
| /* |
| * Configure the SA1111 shared memory controller. |
| */ |
| void |
| sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, |
| unsigned int cas_latency) |
| { |
| unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC); |
| |
| if (cas_latency == 3) |
| smcr |= SMCR_CLAT; |
| |
| sa1111_writel(smcr, sachip->base + SA1111_SMCR); |
| |
| /* |
| * Now clear the bits in the DMA mask to work around the SA1111 |
| * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion |
| * Chip Specification Update, June 2000, Erratum #7). |
| */ |
| if (sachip->dev->dma_mask) |
| *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2]; |
| |
| sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2]; |
| } |
| |
| #endif |
| |
| static void sa1111_dev_release(struct device *_dev) |
| { |
| struct sa1111_dev *dev = SA1111_DEV(_dev); |
| |
| release_resource(&dev->res); |
| kfree(dev); |
| } |
| |
| static int |
| sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, |
| struct sa1111_dev_info *info) |
| { |
| struct sa1111_dev *dev; |
| int ret; |
| |
| dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), |
| "%4.4lx", info->offset); |
| |
| dev->devid = info->devid; |
| dev->dev.parent = sachip->dev; |
| dev->dev.bus = &sa1111_bus_type; |
| dev->dev.release = sa1111_dev_release; |
| dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; |
| dev->res.start = sachip->phys + info->offset; |
| dev->res.end = dev->res.start + 511; |
| dev->res.name = dev->dev.bus_id; |
| dev->res.flags = IORESOURCE_MEM; |
| dev->mapbase = sachip->base + info->offset; |
| dev->skpcr_mask = info->skpcr_mask; |
| memmove(dev->irq, info->irq, sizeof(dev->irq)); |
| |
| ret = request_resource(parent, &dev->res); |
| if (ret) { |
| printk("SA1111: failed to allocate resource for %s\n", |
| dev->res.name); |
| kfree(dev); |
| goto out; |
| } |
| |
| |
| ret = device_register(&dev->dev); |
| if (ret) { |
| release_resource(&dev->res); |
| kfree(dev); |
| goto out; |
| } |
| |
| /* |
| * If the parent device has a DMA mask associated with it, |
| * propagate it down to the children. |
| */ |
| if (sachip->dev->dma_mask) { |
| dev->dma_mask = *sachip->dev->dma_mask; |
| dev->dev.dma_mask = &dev->dma_mask; |
| |
| if (dev->dma_mask != 0xffffffffUL) { |
| ret = dmabounce_register_dev(&dev->dev, 1024, 4096); |
| if (ret) { |
| printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id); |
| device_unregister(&dev->dev); |
| } |
| } |
| } |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * sa1111_probe - probe for a single SA1111 chip. |
| * @phys_addr: physical address of device. |
| * |
| * Probe for a SA1111 chip. This must be called |
| * before any other SA1111-specific code. |
| * |
| * Returns: |
| * %-ENODEV device not found. |
| * %-EBUSY physical address already marked in-use. |
| * %0 successful. |
| */ |
| static int |
| __sa1111_probe(struct device *me, struct resource *mem, int irq) |
| { |
| struct sa1111 *sachip; |
| unsigned long id; |
| unsigned int has_devs; |
| int i, ret = -ENODEV; |
| |
| sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL); |
| if (!sachip) |
| return -ENOMEM; |
| |
| sachip->clk = clk_get(me, "GPIO27_CLK"); |
| if (!sachip->clk) { |
| ret = PTR_ERR(sachip->clk); |
| goto err_free; |
| } |
| |
| spin_lock_init(&sachip->lock); |
| |
| sachip->dev = me; |
| dev_set_drvdata(sachip->dev, sachip); |
| |
| sachip->phys = mem->start; |
| sachip->irq = irq; |
| |
| /* |
| * Map the whole region. This also maps the |
| * registers for our children. |
| */ |
| sachip->base = ioremap(mem->start, PAGE_SIZE * 2); |
| if (!sachip->base) { |
| ret = -ENOMEM; |
| goto err_clkput; |
| } |
| |
| /* |
| * Probe for the chip. Only touch the SBI registers. |
| */ |
| id = sa1111_readl(sachip->base + SA1111_SKID); |
| if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { |
| printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); |
| ret = -ENODEV; |
| goto err_unmap; |
| } |
| |
| printk(KERN_INFO "SA1111 Microprocessor Companion Chip: " |
| "silicon revision %lx, metal revision %lx\n", |
| (id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK)); |
| |
| /* |
| * We found it. Wake the chip up, and initialise. |
| */ |
| sa1111_wake(sachip); |
| |
| #ifdef CONFIG_ARCH_SA1100 |
| { |
| unsigned int val; |
| |
| /* |
| * The SDRAM configuration of the SA1110 and the SA1111 must |
| * match. This is very important to ensure that SA1111 accesses |
| * don't corrupt the SDRAM. Note that this ungates the SA1111's |
| * MBGNT signal, so we must have called sa1110_mb_disable() |
| * beforehand. |
| */ |
| sa1111_configure_smc(sachip, 1, |
| FExtr(MDCNFG, MDCNFG_SA1110_DRAC0), |
| FExtr(MDCNFG, MDCNFG_SA1110_TDL0)); |
| |
| /* |
| * We only need to turn on DCLK whenever we want to use the |
| * DMA. It can otherwise be held firmly in the off position. |
| * (currently, we always enable it.) |
| */ |
| val = sa1111_readl(sachip->base + SA1111_SKPCR); |
| sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR); |
| |
| /* |
| * Enable the SA1110 memory bus request and grant signals. |
| */ |
| sa1110_mb_enable(); |
| } |
| #endif |
| |
| /* |
| * The interrupt controller must be initialised before any |
| * other device to ensure that the interrupts are available. |
| */ |
| if (sachip->irq != NO_IRQ) |
| sa1111_setup_irq(sachip); |
| |
| g_sa1111 = sachip; |
| |
| has_devs = ~0; |
| if (machine_is_assabet() || machine_is_jornada720() || |
| machine_is_badge4()) |
| has_devs &= ~(1 << 4); |
| else |
| has_devs &= ~(1 << 1); |
| |
| for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++) |
| if (has_devs & (1 << i)) |
| sa1111_init_one_child(sachip, mem, &sa1111_devices[i]); |
| |
| return 0; |
| |
| err_unmap: |
| iounmap(sachip->base); |
| err_clkput: |
| clk_put(sachip->clk); |
| err_free: |
| kfree(sachip); |
| return ret; |
| } |
| |
| static int sa1111_remove_one(struct device *dev, void *data) |
| { |
| device_unregister(dev); |
| return 0; |
| } |
| |
| static void __sa1111_remove(struct sa1111 *sachip) |
| { |
| void __iomem *irqbase = sachip->base + SA1111_INTC; |
| |
| device_for_each_child(sachip->dev, NULL, sa1111_remove_one); |
| |
| /* disable all IRQs */ |
| sa1111_writel(0, irqbase + SA1111_INTEN0); |
| sa1111_writel(0, irqbase + SA1111_INTEN1); |
| sa1111_writel(0, irqbase + SA1111_WAKEEN0); |
| sa1111_writel(0, irqbase + SA1111_WAKEEN1); |
| |
| clk_disable(sachip->clk); |
| |
| if (sachip->irq != NO_IRQ) { |
| set_irq_chained_handler(sachip->irq, NULL); |
| set_irq_data(sachip->irq, NULL); |
| |
| release_mem_region(sachip->phys + SA1111_INTC, 512); |
| } |
| |
| iounmap(sachip->base); |
| clk_put(sachip->clk); |
| kfree(sachip); |
| } |
| |
| /* |
| * According to the "Intel StrongARM SA-1111 Microprocessor Companion |
| * Chip Specification Update" (June 2000), erratum #7, there is a |
| * significant bug in the SA1111 SDRAM shared memory controller. If |
| * an access to a region of memory above 1MB relative to the bank base, |
| * it is important that address bit 10 _NOT_ be asserted. Depending |
| * on the configuration of the RAM, bit 10 may correspond to one |
| * of several different (processor-relative) address bits. |
| * |
| * This routine only identifies whether or not a given DMA address |
| * is susceptible to the bug. |
| * |
| * This should only get called for sa1111_device types due to the |
| * way we configure our device dma_masks. |
| */ |
| int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) |
| { |
| /* |
| * Section 4.6 of the "Intel StrongARM SA-1111 Development Module |
| * User's Guide" mentions that jumpers R51 and R52 control the |
| * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or |
| * SDRAM bank 1 on Neponset). The default configuration selects |
| * Assabet, so any address in bank 1 is necessarily invalid. |
| */ |
| return ((machine_is_assabet() || machine_is_pfs168()) && |
| (addr >= 0xc8000000 || (addr + size) >= 0xc8000000)); |
| } |
| |
| struct sa1111_save_data { |
| unsigned int skcr; |
| unsigned int skpcr; |
| unsigned int skcdr; |
| unsigned char skaud; |
| unsigned char skpwm0; |
| unsigned char skpwm1; |
| |
| /* |
| * Interrupt controller |
| */ |
| unsigned int intpol0; |
| unsigned int intpol1; |
| unsigned int inten0; |
| unsigned int inten1; |
| unsigned int wakepol0; |
| unsigned int wakepol1; |
| unsigned int wakeen0; |
| unsigned int wakeen1; |
| }; |
| |
| #ifdef CONFIG_PM |
| |
| static int sa1111_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| struct sa1111 *sachip = platform_get_drvdata(dev); |
| struct sa1111_save_data *save; |
| unsigned long flags; |
| unsigned int val; |
| void __iomem *base; |
| |
| save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); |
| if (!save) |
| return -ENOMEM; |
| dev->dev.power.saved_state = save; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| |
| /* |
| * Save state. |
| */ |
| base = sachip->base; |
| save->skcr = sa1111_readl(base + SA1111_SKCR); |
| save->skpcr = sa1111_readl(base + SA1111_SKPCR); |
| save->skcdr = sa1111_readl(base + SA1111_SKCDR); |
| save->skaud = sa1111_readl(base + SA1111_SKAUD); |
| save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0); |
| save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1); |
| |
| base = sachip->base + SA1111_INTC; |
| save->intpol0 = sa1111_readl(base + SA1111_INTPOL0); |
| save->intpol1 = sa1111_readl(base + SA1111_INTPOL1); |
| save->inten0 = sa1111_readl(base + SA1111_INTEN0); |
| save->inten1 = sa1111_readl(base + SA1111_INTEN1); |
| save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0); |
| save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1); |
| save->wakeen0 = sa1111_readl(base + SA1111_WAKEEN0); |
| save->wakeen1 = sa1111_readl(base + SA1111_WAKEEN1); |
| |
| /* |
| * Disable. |
| */ |
| val = sa1111_readl(sachip->base + SA1111_SKCR); |
| sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); |
| sa1111_writel(0, sachip->base + SA1111_SKPWM0); |
| sa1111_writel(0, sachip->base + SA1111_SKPWM1); |
| |
| clk_disable(sachip->clk); |
| |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * sa1111_resume - Restore the SA1111 device state. |
| * @dev: device to restore |
| * |
| * Restore the general state of the SA1111; clock control and |
| * interrupt controller. Other parts of the SA1111 must be |
| * restored by their respective drivers, and must be called |
| * via LDM after this function. |
| */ |
| static int sa1111_resume(struct platform_device *dev) |
| { |
| struct sa1111 *sachip = platform_get_drvdata(dev); |
| struct sa1111_save_data *save; |
| unsigned long flags, id; |
| void __iomem *base; |
| |
| save = (struct sa1111_save_data *)dev->dev.power.saved_state; |
| if (!save) |
| return 0; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| |
| /* |
| * Ensure that the SA1111 is still here. |
| * FIXME: shouldn't do this here. |
| */ |
| id = sa1111_readl(sachip->base + SA1111_SKID); |
| if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { |
| __sa1111_remove(sachip); |
| platform_set_drvdata(dev, NULL); |
| kfree(save); |
| return 0; |
| } |
| |
| /* |
| * First of all, wake up the chip. |
| */ |
| sa1111_wake(sachip); |
| sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0); |
| sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1); |
| |
| base = sachip->base; |
| sa1111_writel(save->skcr, base + SA1111_SKCR); |
| sa1111_writel(save->skpcr, base + SA1111_SKPCR); |
| sa1111_writel(save->skcdr, base + SA1111_SKCDR); |
| sa1111_writel(save->skaud, base + SA1111_SKAUD); |
| sa1111_writel(save->skpwm0, base + SA1111_SKPWM0); |
| sa1111_writel(save->skpwm1, base + SA1111_SKPWM1); |
| |
| base = sachip->base + SA1111_INTC; |
| sa1111_writel(save->intpol0, base + SA1111_INTPOL0); |
| sa1111_writel(save->intpol1, base + SA1111_INTPOL1); |
| sa1111_writel(save->inten0, base + SA1111_INTEN0); |
| sa1111_writel(save->inten1, base + SA1111_INTEN1); |
| sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0); |
| sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1); |
| sa1111_writel(save->wakeen0, base + SA1111_WAKEEN0); |
| sa1111_writel(save->wakeen1, base + SA1111_WAKEEN1); |
| |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| |
| dev->dev.power.saved_state = NULL; |
| kfree(save); |
| |
| return 0; |
| } |
| |
| #else |
| #define sa1111_suspend NULL |
| #define sa1111_resume NULL |
| #endif |
| |
| static int sa1111_probe(struct platform_device *pdev) |
| { |
| struct resource *mem; |
| int irq; |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mem) |
| return -EINVAL; |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return -ENXIO; |
| |
| return __sa1111_probe(&pdev->dev, mem, irq); |
| } |
| |
| static int sa1111_remove(struct platform_device *pdev) |
| { |
| struct sa1111 *sachip = platform_get_drvdata(pdev); |
| |
| if (sachip) { |
| __sa1111_remove(sachip); |
| platform_set_drvdata(pdev, NULL); |
| |
| #ifdef CONFIG_PM |
| kfree(pdev->dev.power.saved_state); |
| pdev->dev.power.saved_state = NULL; |
| #endif |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Not sure if this should be on the system bus or not yet. |
| * We really want some way to register a system device at |
| * the per-machine level, and then have this driver pick |
| * up the registered devices. |
| * |
| * We also need to handle the SDRAM configuration for |
| * PXA250/SA1110 machine classes. |
| */ |
| static struct platform_driver sa1111_device_driver = { |
| .probe = sa1111_probe, |
| .remove = sa1111_remove, |
| .suspend = sa1111_suspend, |
| .resume = sa1111_resume, |
| .driver = { |
| .name = "sa1111", |
| }, |
| }; |
| |
| /* |
| * Get the parent device driver (us) structure |
| * from a child function device |
| */ |
| static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev) |
| { |
| return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent); |
| } |
| |
| /* |
| * The bits in the opdiv field are non-linear. |
| */ |
| static unsigned char opdiv_table[] = { 1, 4, 2, 8 }; |
| |
| static unsigned int __sa1111_pll_clock(struct sa1111 *sachip) |
| { |
| unsigned int skcdr, fbdiv, ipdiv, opdiv; |
| |
| skcdr = sa1111_readl(sachip->base + SA1111_SKCDR); |
| |
| fbdiv = (skcdr & 0x007f) + 2; |
| ipdiv = ((skcdr & 0x0f80) >> 7) + 2; |
| opdiv = opdiv_table[(skcdr & 0x3000) >> 12]; |
| |
| return 3686400 * fbdiv / (ipdiv * opdiv); |
| } |
| |
| /** |
| * sa1111_pll_clock - return the current PLL clock frequency. |
| * @sadev: SA1111 function block |
| * |
| * BUG: we should look at SKCR. We also blindly believe that |
| * the chip is being fed with the 3.6864MHz clock. |
| * |
| * Returns the PLL clock in Hz. |
| */ |
| unsigned int sa1111_pll_clock(struct sa1111_dev *sadev) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| |
| return __sa1111_pll_clock(sachip); |
| } |
| |
| /** |
| * sa1111_select_audio_mode - select I2S or AC link mode |
| * @sadev: SA1111 function block |
| * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S |
| * |
| * Frob the SKCR to select AC Link mode or I2S mode for |
| * the audio block. |
| */ |
| void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| |
| val = sa1111_readl(sachip->base + SA1111_SKCR); |
| if (mode == SA1111_AUDIO_I2S) { |
| val &= ~SKCR_SELAC; |
| } else { |
| val |= SKCR_SELAC; |
| } |
| sa1111_writel(val, sachip->base + SA1111_SKCR); |
| |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| /** |
| * sa1111_set_audio_rate - set the audio sample rate |
| * @sadev: SA1111 SAC function block |
| * @rate: sample rate to select |
| */ |
| int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned int div; |
| |
| if (sadev->devid != SA1111_DEVID_SAC) |
| return -EINVAL; |
| |
| div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate; |
| if (div == 0) |
| div = 1; |
| if (div > 128) |
| div = 128; |
| |
| sa1111_writel(div - 1, sachip->base + SA1111_SKAUD); |
| |
| return 0; |
| } |
| |
| /** |
| * sa1111_get_audio_rate - get the audio sample rate |
| * @sadev: SA1111 SAC function block device |
| */ |
| int sa1111_get_audio_rate(struct sa1111_dev *sadev) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long div; |
| |
| if (sadev->devid != SA1111_DEVID_SAC) |
| return -EINVAL; |
| |
| div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1; |
| |
| return __sa1111_pll_clock(sachip) / (256 * div); |
| } |
| |
| void sa1111_set_io_dir(struct sa1111_dev *sadev, |
| unsigned int bits, unsigned int dir, |
| unsigned int sleep_dir) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| void __iomem *gpio = sachip->base + SA1111_GPIO; |
| |
| #define MODIFY_BITS(port, mask, dir) \ |
| if (mask) { \ |
| val = sa1111_readl(port); \ |
| val &= ~(mask); \ |
| val |= (dir) & (mask); \ |
| sa1111_writel(val, port); \ |
| } |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| MODIFY_BITS(gpio + SA1111_GPIO_PADDR, bits & 15, dir); |
| MODIFY_BITS(gpio + SA1111_GPIO_PBDDR, (bits >> 8) & 255, dir >> 8); |
| MODIFY_BITS(gpio + SA1111_GPIO_PCDDR, (bits >> 16) & 255, dir >> 16); |
| |
| MODIFY_BITS(gpio + SA1111_GPIO_PASDR, bits & 15, sleep_dir); |
| MODIFY_BITS(gpio + SA1111_GPIO_PBSDR, (bits >> 8) & 255, sleep_dir >> 8); |
| MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| void __iomem *gpio = sachip->base + SA1111_GPIO; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| MODIFY_BITS(gpio + SA1111_GPIO_PADWR, bits & 15, v); |
| MODIFY_BITS(gpio + SA1111_GPIO_PBDWR, (bits >> 8) & 255, v >> 8); |
| MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| void __iomem *gpio = sachip->base + SA1111_GPIO; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| MODIFY_BITS(gpio + SA1111_GPIO_PASSR, bits & 15, v); |
| MODIFY_BITS(gpio + SA1111_GPIO_PBSSR, (bits >> 8) & 255, v >> 8); |
| MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| /* |
| * Individual device operations. |
| */ |
| |
| /** |
| * sa1111_enable_device - enable an on-chip SA1111 function block |
| * @sadev: SA1111 function block device to enable |
| */ |
| void sa1111_enable_device(struct sa1111_dev *sadev) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| val = sa1111_readl(sachip->base + SA1111_SKPCR); |
| sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| /** |
| * sa1111_disable_device - disable an on-chip SA1111 function block |
| * @sadev: SA1111 function block device to disable |
| */ |
| void sa1111_disable_device(struct sa1111_dev *sadev) |
| { |
| struct sa1111 *sachip = sa1111_chip_driver(sadev); |
| unsigned long flags; |
| unsigned int val; |
| |
| spin_lock_irqsave(&sachip->lock, flags); |
| val = sa1111_readl(sachip->base + SA1111_SKPCR); |
| sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); |
| spin_unlock_irqrestore(&sachip->lock, flags); |
| } |
| |
| /* |
| * SA1111 "Register Access Bus." |
| * |
| * We model this as a regular bus type, and hang devices directly |
| * off this. |
| */ |
| static int sa1111_match(struct device *_dev, struct device_driver *_drv) |
| { |
| struct sa1111_dev *dev = SA1111_DEV(_dev); |
| struct sa1111_driver *drv = SA1111_DRV(_drv); |
| |
| return dev->devid == drv->devid; |
| } |
| |
| static int sa1111_bus_suspend(struct device *dev, pm_message_t state) |
| { |
| struct sa1111_dev *sadev = SA1111_DEV(dev); |
| struct sa1111_driver *drv = SA1111_DRV(dev->driver); |
| int ret = 0; |
| |
| if (drv && drv->suspend) |
| ret = drv->suspend(sadev, state); |
| return ret; |
| } |
| |
| static int sa1111_bus_resume(struct device *dev) |
| { |
| struct sa1111_dev *sadev = SA1111_DEV(dev); |
| struct sa1111_driver *drv = SA1111_DRV(dev->driver); |
| int ret = 0; |
| |
| if (drv && drv->resume) |
| ret = drv->resume(sadev); |
| return ret; |
| } |
| |
| static int sa1111_bus_probe(struct device *dev) |
| { |
| struct sa1111_dev *sadev = SA1111_DEV(dev); |
| struct sa1111_driver *drv = SA1111_DRV(dev->driver); |
| int ret = -ENODEV; |
| |
| if (drv->probe) |
| ret = drv->probe(sadev); |
| return ret; |
| } |
| |
| static int sa1111_bus_remove(struct device *dev) |
| { |
| struct sa1111_dev *sadev = SA1111_DEV(dev); |
| struct sa1111_driver *drv = SA1111_DRV(dev->driver); |
| int ret = 0; |
| |
| if (drv->remove) |
| ret = drv->remove(sadev); |
| return ret; |
| } |
| |
| struct bus_type sa1111_bus_type = { |
| .name = "sa1111-rab", |
| .match = sa1111_match, |
| .probe = sa1111_bus_probe, |
| .remove = sa1111_bus_remove, |
| .suspend = sa1111_bus_suspend, |
| .resume = sa1111_bus_resume, |
| }; |
| |
| int sa1111_driver_register(struct sa1111_driver *driver) |
| { |
| driver->drv.bus = &sa1111_bus_type; |
| return driver_register(&driver->drv); |
| } |
| |
| void sa1111_driver_unregister(struct sa1111_driver *driver) |
| { |
| driver_unregister(&driver->drv); |
| } |
| |
| static int __init sa1111_init(void) |
| { |
| int ret = bus_register(&sa1111_bus_type); |
| if (ret == 0) |
| platform_driver_register(&sa1111_device_driver); |
| return ret; |
| } |
| |
| static void __exit sa1111_exit(void) |
| { |
| platform_driver_unregister(&sa1111_device_driver); |
| bus_unregister(&sa1111_bus_type); |
| } |
| |
| subsys_initcall(sa1111_init); |
| module_exit(sa1111_exit); |
| |
| MODULE_DESCRIPTION("Intel Corporation SA1111 core driver"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(sa1111_select_audio_mode); |
| EXPORT_SYMBOL(sa1111_set_audio_rate); |
| EXPORT_SYMBOL(sa1111_get_audio_rate); |
| EXPORT_SYMBOL(sa1111_set_io_dir); |
| EXPORT_SYMBOL(sa1111_set_io); |
| EXPORT_SYMBOL(sa1111_set_sleep_io); |
| EXPORT_SYMBOL(sa1111_enable_device); |
| EXPORT_SYMBOL(sa1111_disable_device); |
| EXPORT_SYMBOL(sa1111_pll_clock); |
| EXPORT_SYMBOL(sa1111_bus_type); |
| EXPORT_SYMBOL(sa1111_driver_register); |
| EXPORT_SYMBOL(sa1111_driver_unregister); |