| /* Moorestown PMIC GPIO (access through IPC) driver |
| * Copyright (c) 2008 - 2009, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* Supports: |
| * Moorestown platform PMIC chip |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/stddef.h> |
| #include <linux/slab.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <asm/intel_scu_ipc.h> |
| #include <linux/device.h> |
| #include <linux/intel_pmic_gpio.h> |
| #include <linux/platform_device.h> |
| |
| #define DRIVER_NAME "pmic_gpio" |
| |
| /* register offset that IPC driver should use |
| * 8 GPIO + 8 GPOSW (6 controllable) + 8GPO |
| */ |
| enum pmic_gpio_register { |
| GPIO0 = 0xE0, |
| GPIO7 = 0xE7, |
| GPIOINT = 0xE8, |
| GPOSWCTL0 = 0xEC, |
| GPOSWCTL5 = 0xF1, |
| GPO = 0xF4, |
| }; |
| |
| /* bits definition for GPIO & GPOSW */ |
| #define GPIO_DRV 0x01 |
| #define GPIO_DIR 0x02 |
| #define GPIO_DIN 0x04 |
| #define GPIO_DOU 0x08 |
| #define GPIO_INTCTL 0x30 |
| #define GPIO_DBC 0xc0 |
| |
| #define GPOSW_DRV 0x01 |
| #define GPOSW_DOU 0x08 |
| #define GPOSW_RDRV 0x30 |
| |
| #define GPIO_UPDATE_TYPE 0x80000000 |
| |
| #define NUM_GPIO 24 |
| |
| struct pmic_gpio { |
| struct mutex buslock; |
| struct gpio_chip chip; |
| void *gpiointr; |
| int irq; |
| unsigned irq_base; |
| unsigned int update_type; |
| u32 trigger_type; |
| }; |
| |
| static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| if (offset > 8) { |
| printk(KERN_ERR |
| "%s: only pin 0-7 support input\n", __func__); |
| return -1;/* we only have 8 GPIO can use as input */ |
| } |
| return intel_scu_ipc_update_register(GPIO0 + offset, |
| GPIO_DIR, GPIO_DIR); |
| } |
| |
| static int pmic_gpio_direction_output(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| int rc = 0; |
| |
| if (offset < 8)/* it is GPIO */ |
| rc = intel_scu_ipc_update_register(GPIO0 + offset, |
| GPIO_DRV | (value ? GPIO_DOU : 0), |
| GPIO_DRV | GPIO_DOU | GPIO_DIR); |
| else if (offset < 16)/* it is GPOSW */ |
| rc = intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8, |
| GPOSW_DRV | (value ? GPOSW_DOU : 0), |
| GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV); |
| else if (offset > 15 && offset < 24)/* it is GPO */ |
| rc = intel_scu_ipc_update_register(GPO, |
| value ? 1 << (offset - 16) : 0, |
| 1 << (offset - 16)); |
| else { |
| printk(KERN_ERR |
| "%s: invalid PMIC GPIO pin %d!\n", __func__, offset); |
| WARN_ON(1); |
| } |
| |
| return rc; |
| } |
| |
| static int pmic_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| u8 r; |
| int ret; |
| |
| /* we only have 8 GPIO pins we can use as input */ |
| if (offset > 8) |
| return -EOPNOTSUPP; |
| ret = intel_scu_ipc_ioread8(GPIO0 + offset, &r); |
| if (ret < 0) |
| return ret; |
| return r & GPIO_DIN; |
| } |
| |
| static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| if (offset < 8)/* it is GPIO */ |
| intel_scu_ipc_update_register(GPIO0 + offset, |
| GPIO_DRV | (value ? GPIO_DOU : 0), |
| GPIO_DRV | GPIO_DOU); |
| else if (offset < 16)/* it is GPOSW */ |
| intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8, |
| GPOSW_DRV | (value ? GPOSW_DOU : 0), |
| GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV); |
| else if (offset > 15 && offset < 24) /* it is GPO */ |
| intel_scu_ipc_update_register(GPO, |
| value ? 1 << (offset - 16) : 0, |
| 1 << (offset - 16)); |
| } |
| |
| /* |
| * This is called from genirq with pg->buslock locked and |
| * irq_desc->lock held. We can not access the scu bus here, so we |
| * store the change and update in the bus_sync_unlock() function below |
| */ |
| static int pmic_irq_type(struct irq_data *data, unsigned type) |
| { |
| struct pmic_gpio *pg = irq_data_get_irq_chip_data(data); |
| u32 gpio = data->irq - pg->irq_base; |
| |
| if (gpio >= pg->chip.ngpio) |
| return -EINVAL; |
| |
| pg->trigger_type = type; |
| pg->update_type = gpio | GPIO_UPDATE_TYPE; |
| return 0; |
| } |
| |
| static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip); |
| |
| return pg->irq_base + offset; |
| } |
| |
| /* the gpiointr register is read-clear, so just do nothing. */ |
| static void pmic_irq_unmask(struct irq_data *data) { } |
| |
| static void pmic_irq_mask(struct irq_data *data) { } |
| |
| static struct irq_chip pmic_irqchip = { |
| .name = "PMIC-GPIO", |
| .irq_mask = pmic_irq_mask, |
| .irq_unmask = pmic_irq_unmask, |
| .irq_set_type = pmic_irq_type, |
| }; |
| |
| static irqreturn_t pmic_irq_handler(int irq, void *data) |
| { |
| struct pmic_gpio *pg = data; |
| u8 intsts = *((u8 *)pg->gpiointr + 4); |
| int gpio; |
| irqreturn_t ret = IRQ_NONE; |
| |
| for (gpio = 0; gpio < 8; gpio++) { |
| if (intsts & (1 << gpio)) { |
| pr_debug("pmic pin %d triggered\n", gpio); |
| generic_handle_irq(pg->irq_base + gpio); |
| ret = IRQ_HANDLED; |
| } |
| } |
| return ret; |
| } |
| |
| static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| int irq = platform_get_irq(pdev, 0); |
| struct intel_pmic_gpio_platform_data *pdata = dev->platform_data; |
| |
| struct pmic_gpio *pg; |
| int retval; |
| int i; |
| |
| if (irq < 0) { |
| dev_dbg(dev, "no IRQ line\n"); |
| return -EINVAL; |
| } |
| |
| if (!pdata || !pdata->gpio_base || !pdata->irq_base) { |
| dev_dbg(dev, "incorrect or missing platform data\n"); |
| return -EINVAL; |
| } |
| |
| pg = kzalloc(sizeof(*pg), GFP_KERNEL); |
| if (!pg) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, pg); |
| |
| pg->irq = irq; |
| /* setting up SRAM mapping for GPIOINT register */ |
| pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8); |
| if (!pg->gpiointr) { |
| printk(KERN_ERR "%s: Can not map GPIOINT.\n", __func__); |
| retval = -EINVAL; |
| goto err2; |
| } |
| pg->irq_base = pdata->irq_base; |
| pg->chip.label = "intel_pmic"; |
| pg->chip.direction_input = pmic_gpio_direction_input; |
| pg->chip.direction_output = pmic_gpio_direction_output; |
| pg->chip.get = pmic_gpio_get; |
| pg->chip.set = pmic_gpio_set; |
| pg->chip.to_irq = pmic_gpio_to_irq; |
| pg->chip.base = pdata->gpio_base; |
| pg->chip.ngpio = NUM_GPIO; |
| pg->chip.can_sleep = 1; |
| pg->chip.dev = dev; |
| |
| mutex_init(&pg->buslock); |
| |
| pg->chip.dev = dev; |
| retval = gpiochip_add(&pg->chip); |
| if (retval) { |
| printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__); |
| goto err; |
| } |
| |
| retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg); |
| if (retval) { |
| printk(KERN_WARNING "pmic: Interrupt request failed\n"); |
| goto err; |
| } |
| |
| for (i = 0; i < 8; i++) { |
| irq_set_chip_and_handler_name(i + pg->irq_base, |
| &pmic_irqchip, |
| handle_simple_irq, |
| "demux"); |
| irq_set_chip_data(i + pg->irq_base, pg); |
| } |
| return 0; |
| err: |
| iounmap(pg->gpiointr); |
| err2: |
| kfree(pg); |
| return retval; |
| } |
| |
| /* at the same time, register a platform driver |
| * this supports the sfi 0.81 fw */ |
| static struct platform_driver platform_pmic_gpio_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| }, |
| .probe = platform_pmic_gpio_probe, |
| }; |
| |
| static int __init platform_pmic_gpio_init(void) |
| { |
| return platform_driver_register(&platform_pmic_gpio_driver); |
| } |
| |
| subsys_initcall(platform_pmic_gpio_init); |
| |
| MODULE_AUTHOR("Alek Du <alek.du@intel.com>"); |
| MODULE_DESCRIPTION("Intel Moorestown PMIC GPIO driver"); |
| MODULE_LICENSE("GPL v2"); |