[ARM] Kirkwood: add support for PCIe1
This patch extends the kirkwood's PCIe support up to 2 controllers as in the 6282 devices.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 4ccfdf9..9dd67c7 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -44,6 +44,11 @@
.length = KIRKWOOD_PCIE_IO_SIZE,
.type = MT_DEVICE,
}, {
+ .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
+ .length = KIRKWOOD_PCIE1_IO_SIZE,
+ .type = MT_DEVICE,
+ }, {
.virtual = KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
.length = KIRKWOOD_REGS_SIZE,
@@ -960,12 +965,14 @@
static int __init kirkwood_clock_gate(void)
{
unsigned int curr = readl(CLOCK_GATING_CTRL);
+ u32 dev, rev;
+ kirkwood_pcie_id(&dev, &rev);
printk(KERN_DEBUG "Gating clock of unused units\n");
printk(KERN_DEBUG "before: 0x%08x\n", curr);
/* Make sure those units are accessible */
- writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+ writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
/* For SATA: first shutdown the phy */
if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
@@ -990,6 +997,18 @@
writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
}
+ /* For PCIe 1: first shutdown the phy */
+ if (dev == MV88F6282_DEV_ID) {
+ if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
+ writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
+ while (1)
+ if (readl(PCIE1_STATUS) & 0x1)
+ break;
+ writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
+ }
+ } else /* keep this bit set for devices that don't have PCIe1 */
+ kirkwood_clk_ctrl |= CGC_PEX1;
+
/* Now gate clock the required units */
writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));