synclink_gt: fix per device locking
Fix a long standing bug with per device locking.
Each device has an associated spinlock for synchronizing access to
hardware and state information with the ISR. A single hardware card has
one or more devices.
Bug: Non ISR code correctly acquires and releases the per device lock.
ISR incorrectly always acquires and releases the lock of the first device
on the card.
The decoupled and list based nature of the ISR and deferred processing
interaction allowed this to work in normal operation. Exceptional events
like an application forcing hardware shutdown, reset, or reconfiguration
while active can trigger the bug.
Fixed ISR to acquire and release the per device lock.
One exception is manipulation of the GPIO card resource which is global
and effectively owned by the first device of the card. Non-ISR access to
GPIO resource is changed to use lock of first device on card.
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 1746d91..1199978 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -2357,26 +2357,27 @@
DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
- spin_lock(&info->lock);
-
while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
info->irq_occurred = true;
for(i=0; i < info->port_count ; i++) {
if (info->port_array[i] == NULL)
continue;
+ spin_lock(&info->port_array[i]->lock);
if (gsr & (BIT8 << i))
isr_serial(info->port_array[i]);
if (gsr & (BIT16 << (i*2)))
isr_rdma(info->port_array[i]);
if (gsr & (BIT17 << (i*2)))
isr_tdma(info->port_array[i]);
+ spin_unlock(&info->port_array[i]->lock);
}
}
if (info->gpio_present) {
unsigned int state;
unsigned int changed;
+ spin_lock(&info->lock);
while ((changed = rd_reg32(info, IOSR)) != 0) {
DBGISR(("%s iosr=%08x\n", info->device_name, changed));
/* read latched state of GPIO signals */
@@ -2388,22 +2389,24 @@
isr_gpio(info->port_array[i], changed, state);
}
}
+ spin_unlock(&info->lock);
}
for(i=0; i < info->port_count ; i++) {
struct slgt_info *port = info->port_array[i];
-
- if (port && (port->port.count || port->netcount) &&
+ if (port == NULL)
+ continue;
+ spin_lock(&port->lock);
+ if ((port->port.count || port->netcount) &&
port->pending_bh && !port->bh_running &&
!port->bh_requested) {
DBGISR(("%s bh queued\n", port->device_name));
schedule_work(&port->task);
port->bh_requested = true;
}
+ spin_unlock(&port->lock);
}
- spin_unlock(&info->lock);
-
DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
return IRQ_HANDLED;
}
@@ -2906,7 +2909,7 @@
info->device_name, gpio.state, gpio.smask,
gpio.dir, gpio.dmask));
- spin_lock_irqsave(&info->lock,flags);
+ spin_lock_irqsave(&info->port_array[0]->lock, flags);
if (gpio.dmask) {
data = rd_reg32(info, IODR);
data |= gpio.dmask & gpio.dir;
@@ -2919,7 +2922,7 @@
data &= ~(gpio.smask & ~gpio.state);
wr_reg32(info, IOVR, data);
}
- spin_unlock_irqrestore(&info->lock,flags);
+ spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
return 0;
}
@@ -3020,7 +3023,7 @@
return -EINVAL;
init_cond_wait(&wait, gpio.smask);
- spin_lock_irqsave(&info->lock, flags);
+ spin_lock_irqsave(&info->port_array[0]->lock, flags);
/* enable interrupts for watched pins */
wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
/* get current pin states */
@@ -3032,20 +3035,20 @@
} else {
/* wait for target state */
add_cond_wait(&info->gpio_wait_q, &wait);
- spin_unlock_irqrestore(&info->lock, flags);
+ spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
schedule();
if (signal_pending(current))
rc = -ERESTARTSYS;
else
gpio.state = wait.data;
- spin_lock_irqsave(&info->lock, flags);
+ spin_lock_irqsave(&info->port_array[0]->lock, flags);
remove_cond_wait(&info->gpio_wait_q, &wait);
}
/* disable all GPIO interrupts if no waiting processes */
if (info->gpio_wait_q == NULL)
wr_reg32(info, IOER, 0);
- spin_unlock_irqrestore(&info->lock,flags);
+ spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
rc = -EFAULT;
@@ -3578,7 +3581,6 @@
/* copy resource information from first port to others */
for (i = 1; i < port_count; ++i) {
- port_array[i]->lock = port_array[0]->lock;
port_array[i]->irq_level = port_array[0]->irq_level;
port_array[i]->reg_addr = port_array[0]->reg_addr;
alloc_dma_bufs(port_array[i]);