blob: abec4684653956aad9c58719f393b6a04678293e [file] [log] [blame]
Amit Kumar Salechaaf19b492010-01-13 00:37:25 +00001/*
2 * Copyright (C) 2009 - QLogic Corporation.
3 * All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
18 * MA 02111-1307, USA.
19 *
20 * The full GNU General Public License is included in this distribution
21 * in the file called "COPYING".
22 *
23 */
24
25#ifndef _QLCNIC_H_
26#define _QLCNIC_H_
27
28#include <linux/module.h>
29#include <linux/kernel.h>
30#include <linux/types.h>
31#include <linux/ioport.h>
32#include <linux/pci.h>
33#include <linux/netdevice.h>
34#include <linux/etherdevice.h>
35#include <linux/ip.h>
36#include <linux/in.h>
37#include <linux/tcp.h>
38#include <linux/skbuff.h>
39#include <linux/firmware.h>
40
41#include <linux/ethtool.h>
42#include <linux/mii.h>
43#include <linux/timer.h>
44
45#include <linux/vmalloc.h>
46
47#include <linux/io.h>
48#include <asm/byteorder.h>
49
50#include "qlcnic_hdr.h"
51
52#define _QLCNIC_LINUX_MAJOR 5
53#define _QLCNIC_LINUX_MINOR 0
54#define _QLCNIC_LINUX_SUBVERSION 0
55#define QLCNIC_LINUX_VERSIONID "5.0.0"
56
57#define QLCNIC_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
58#define _major(v) (((v) >> 24) & 0xff)
59#define _minor(v) (((v) >> 16) & 0xff)
60#define _build(v) ((v) & 0xffff)
61
62/* version in image has weird encoding:
63 * 7:0 - major
64 * 15:8 - minor
65 * 31:16 - build (little endian)
66 */
67#define QLCNIC_DECODE_VERSION(v) \
68 QLCNIC_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
69
70#define QLCNIC_NUM_FLASH_SECTORS (64)
71#define QLCNIC_FLASH_SECTOR_SIZE (64 * 1024)
72#define QLCNIC_FLASH_TOTAL_SIZE (QLCNIC_NUM_FLASH_SECTORS \
73 * QLCNIC_FLASH_SECTOR_SIZE)
74
75#define RCV_DESC_RINGSIZE(rds_ring) \
76 (sizeof(struct rcv_desc) * (rds_ring)->num_desc)
77#define RCV_BUFF_RINGSIZE(rds_ring) \
78 (sizeof(struct qlcnic_rx_buffer) * rds_ring->num_desc)
79#define STATUS_DESC_RINGSIZE(sds_ring) \
80 (sizeof(struct status_desc) * (sds_ring)->num_desc)
81#define TX_BUFF_RINGSIZE(tx_ring) \
82 (sizeof(struct qlcnic_cmd_buffer) * tx_ring->num_desc)
83#define TX_DESC_RINGSIZE(tx_ring) \
84 (sizeof(struct cmd_desc_type0) * tx_ring->num_desc)
85
86#define QLCNIC_P3P_A0 0x50
87
88#define QLCNIC_IS_REVISION_P3P(REVISION) (REVISION >= QLCNIC_P3P_A0)
89
90#define FIRST_PAGE_GROUP_START 0
91#define FIRST_PAGE_GROUP_END 0x100000
92
93#define P3_MAX_MTU (9600)
94#define QLCNIC_MAX_ETHERHDR 32 /* This contains some padding */
95
96#define QLCNIC_P3_RX_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN)
97#define QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + P3_MAX_MTU)
98#define QLCNIC_CT_DEFAULT_RX_BUF_LEN 2048
99#define QLCNIC_LRO_BUFFER_EXTRA 2048
100
101#define QLCNIC_RX_LRO_BUFFER_LENGTH (8060)
102
103/* Opcodes to be used with the commands */
104#define TX_ETHER_PKT 0x01
105#define TX_TCP_PKT 0x02
106#define TX_UDP_PKT 0x03
107#define TX_IP_PKT 0x04
108#define TX_TCP_LSO 0x05
109#define TX_TCP_LSO6 0x06
110#define TX_IPSEC 0x07
111#define TX_IPSEC_CMD 0x0a
112#define TX_TCPV6_PKT 0x0b
113#define TX_UDPV6_PKT 0x0c
114
115/* Tx defines */
116#define MAX_BUFFERS_PER_CMD 32
117#define TX_STOP_THRESH ((MAX_SKB_FRAGS >> 2) + 4)
118#define QLCNIC_MAX_TX_TIMEOUTS 2
119
120/*
121 * Following are the states of the Phantom. Phantom will set them and
122 * Host will read to check if the fields are correct.
123 */
124#define PHAN_INITIALIZE_FAILED 0xffff
125#define PHAN_INITIALIZE_COMPLETE 0xff01
126
127/* Host writes the following to notify that it has done the init-handshake */
128#define PHAN_INITIALIZE_ACK 0xf00f
129#define PHAN_PEG_RCV_INITIALIZED 0xff01
130
131#define NUM_RCV_DESC_RINGS 3
132#define NUM_STS_DESC_RINGS 4
133
134#define RCV_RING_NORMAL 0
135#define RCV_RING_JUMBO 1
136#define RCV_RING_LRO 2
137
138#define MIN_CMD_DESCRIPTORS 64
139#define MIN_RCV_DESCRIPTORS 64
140#define MIN_JUMBO_DESCRIPTORS 32
141
142#define MAX_CMD_DESCRIPTORS 1024
143#define MAX_RCV_DESCRIPTORS_1G 4096
144#define MAX_RCV_DESCRIPTORS_10G 8192
145#define MAX_JUMBO_RCV_DESCRIPTORS_1G 512
146#define MAX_JUMBO_RCV_DESCRIPTORS_10G 1024
147#define MAX_LRO_RCV_DESCRIPTORS 8
148
149#define DEFAULT_RCV_DESCRIPTORS_1G 2048
150#define DEFAULT_RCV_DESCRIPTORS_10G 4096
151
152#define get_next_index(index, length) \
153 (((index) + 1) & ((length) - 1))
154
155#define MPORT_MULTI_FUNCTION_MODE 0x2222
156
157/*
158 * Following data structures describe the descriptors that will be used.
159 * Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when
160 * we are doing LSO (above the 1500 size packet) only.
161 */
162
163#define FLAGS_VLAN_TAGGED 0x10
164#define FLAGS_VLAN_OOB 0x40
165
166#define qlcnic_set_tx_vlan_tci(cmd_desc, v) \
167 (cmd_desc)->vlan_TCI = cpu_to_le16(v);
168#define qlcnic_set_cmd_desc_port(cmd_desc, var) \
169 ((cmd_desc)->port_ctxid |= ((var) & 0x0F))
170#define qlcnic_set_cmd_desc_ctxid(cmd_desc, var) \
171 ((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
172
173#define qlcnic_set_tx_port(_desc, _port) \
174 ((_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0))
175
176#define qlcnic_set_tx_flags_opcode(_desc, _flags, _opcode) \
177 ((_desc)->flags_opcode = \
178 cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7)))
179
180#define qlcnic_set_tx_frags_len(_desc, _frags, _len) \
181 ((_desc)->nfrags__length = \
182 cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8)))
183
184struct cmd_desc_type0 {
185 u8 tcp_hdr_offset; /* For LSO only */
186 u8 ip_hdr_offset; /* For LSO only */
187 __le16 flags_opcode; /* 15:13 unused, 12:7 opcode, 6:0 flags */
188 __le32 nfrags__length; /* 31:8 total len, 7:0 frag count */
189
190 __le64 addr_buffer2;
191
192 __le16 reference_handle;
193 __le16 mss;
194 u8 port_ctxid; /* 7:4 ctxid 3:0 port */
195 u8 total_hdr_length; /* LSO only : MAC+IP+TCP Hdr size */
196 __le16 conn_id; /* IPSec offoad only */
197
198 __le64 addr_buffer3;
199 __le64 addr_buffer1;
200
201 __le16 buffer_length[4];
202
203 __le64 addr_buffer4;
204
205 __le32 reserved2;
206 __le16 reserved;
207 __le16 vlan_TCI;
208
209} __attribute__ ((aligned(64)));
210
211/* Note: sizeof(rcv_desc) should always be a mutliple of 2 */
212struct rcv_desc {
213 __le16 reference_handle;
214 __le16 reserved;
215 __le32 buffer_length; /* allocated buffer length (usually 2K) */
216 __le64 addr_buffer;
217};
218
219/* opcode field in status_desc */
220#define QLCNIC_SYN_OFFLOAD 0x03
221#define QLCNIC_RXPKT_DESC 0x04
222#define QLCNIC_OLD_RXPKT_DESC 0x3f
223#define QLCNIC_RESPONSE_DESC 0x05
224#define QLCNIC_LRO_DESC 0x12
225
226/* for status field in status_desc */
227#define STATUS_CKSUM_OK (2)
228
229/* owner bits of status_desc */
230#define STATUS_OWNER_HOST (0x1ULL << 56)
231#define STATUS_OWNER_PHANTOM (0x2ULL << 56)
232
233/* Status descriptor:
234 0-3 port, 4-7 status, 8-11 type, 12-27 total_length
235 28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
236 53-55 desc_cnt, 56-57 owner, 58-63 opcode
237 */
238#define qlcnic_get_sts_port(sts_data) \
239 ((sts_data) & 0x0F)
240#define qlcnic_get_sts_status(sts_data) \
241 (((sts_data) >> 4) & 0x0F)
242#define qlcnic_get_sts_type(sts_data) \
243 (((sts_data) >> 8) & 0x0F)
244#define qlcnic_get_sts_totallength(sts_data) \
245 (((sts_data) >> 12) & 0xFFFF)
246#define qlcnic_get_sts_refhandle(sts_data) \
247 (((sts_data) >> 28) & 0xFFFF)
248#define qlcnic_get_sts_prot(sts_data) \
249 (((sts_data) >> 44) & 0x0F)
250#define qlcnic_get_sts_pkt_offset(sts_data) \
251 (((sts_data) >> 48) & 0x1F)
252#define qlcnic_get_sts_desc_cnt(sts_data) \
253 (((sts_data) >> 53) & 0x7)
254#define qlcnic_get_sts_opcode(sts_data) \
255 (((sts_data) >> 58) & 0x03F)
256
257#define qlcnic_get_lro_sts_refhandle(sts_data) \
258 ((sts_data) & 0x0FFFF)
259#define qlcnic_get_lro_sts_length(sts_data) \
260 (((sts_data) >> 16) & 0x0FFFF)
261#define qlcnic_get_lro_sts_l2_hdr_offset(sts_data) \
262 (((sts_data) >> 32) & 0x0FF)
263#define qlcnic_get_lro_sts_l4_hdr_offset(sts_data) \
264 (((sts_data) >> 40) & 0x0FF)
265#define qlcnic_get_lro_sts_timestamp(sts_data) \
266 (((sts_data) >> 48) & 0x1)
267#define qlcnic_get_lro_sts_type(sts_data) \
268 (((sts_data) >> 49) & 0x7)
269#define qlcnic_get_lro_sts_push_flag(sts_data) \
270 (((sts_data) >> 52) & 0x1)
271#define qlcnic_get_lro_sts_seq_number(sts_data) \
272 ((sts_data) & 0x0FFFFFFFF)
273
274
275struct status_desc {
276 __le64 status_desc_data[2];
277} __attribute__ ((aligned(16)));
278
279/* UNIFIED ROMIMAGE */
280#define QLCNIC_UNI_FW_MIN_SIZE 0xc8000
281#define QLCNIC_UNI_DIR_SECT_PRODUCT_TBL 0x0
282#define QLCNIC_UNI_DIR_SECT_BOOTLD 0x6
283#define QLCNIC_UNI_DIR_SECT_FW 0x7
284
285/*Offsets */
286#define QLCNIC_UNI_CHIP_REV_OFF 10
287#define QLCNIC_UNI_FLAGS_OFF 11
288#define QLCNIC_UNI_BIOS_VERSION_OFF 12
289#define QLCNIC_UNI_BOOTLD_IDX_OFF 27
290#define QLCNIC_UNI_FIRMWARE_IDX_OFF 29
291
292struct uni_table_desc{
293 u32 findex;
294 u32 num_entries;
295 u32 entry_size;
296 u32 reserved[5];
297};
298
299struct uni_data_desc{
300 u32 findex;
301 u32 size;
302 u32 reserved[5];
303};
304
305/* Magic number to let user know flash is programmed */
306#define QLCNIC_BDINFO_MAGIC 0x12345678
307
308#define QLCNIC_BRDTYPE_P3_REF_QG 0x0021
309#define QLCNIC_BRDTYPE_P3_HMEZ 0x0022
310#define QLCNIC_BRDTYPE_P3_10G_CX4_LP 0x0023
311#define QLCNIC_BRDTYPE_P3_4_GB 0x0024
312#define QLCNIC_BRDTYPE_P3_IMEZ 0x0025
313#define QLCNIC_BRDTYPE_P3_10G_SFP_PLUS 0x0026
314#define QLCNIC_BRDTYPE_P3_10000_BASE_T 0x0027
315#define QLCNIC_BRDTYPE_P3_XG_LOM 0x0028
316#define QLCNIC_BRDTYPE_P3_4_GB_MM 0x0029
317#define QLCNIC_BRDTYPE_P3_10G_SFP_CT 0x002a
318#define QLCNIC_BRDTYPE_P3_10G_SFP_QT 0x002b
319#define QLCNIC_BRDTYPE_P3_10G_CX4 0x0031
320#define QLCNIC_BRDTYPE_P3_10G_XFP 0x0032
321#define QLCNIC_BRDTYPE_P3_10G_TP 0x0080
322
323/* Flash memory map */
324#define QLCNIC_BRDCFG_START 0x4000 /* board config */
325#define QLCNIC_BOOTLD_START 0x10000 /* bootld */
326#define QLCNIC_IMAGE_START 0x43000 /* compressed image */
327#define QLCNIC_USER_START 0x3E8000 /* Firmare info */
328
329#define QLCNIC_FW_VERSION_OFFSET (QLCNIC_USER_START+0x408)
330#define QLCNIC_FW_SIZE_OFFSET (QLCNIC_USER_START+0x40c)
331#define QLCNIC_FW_SERIAL_NUM_OFFSET (QLCNIC_USER_START+0x81c)
332#define QLCNIC_BIOS_VERSION_OFFSET (QLCNIC_USER_START+0x83c)
333
334#define QLCNIC_BRDTYPE_OFFSET (QLCNIC_BRDCFG_START+0x8)
335#define QLCNIC_FW_MAGIC_OFFSET (QLCNIC_BRDCFG_START+0x128)
336
337#define QLCNIC_FW_MIN_SIZE (0x3fffff)
338#define QLCNIC_UNIFIED_ROMIMAGE 0
339#define QLCNIC_FLASH_ROMIMAGE 1
340#define QLCNIC_UNKNOWN_ROMIMAGE 0xff
341
342#define QLCNIC_UNIFIED_ROMIMAGE_NAME "phanfw.bin"
343#define QLCNIC_FLASH_ROMIMAGE_NAME "flash"
344
345extern char qlcnic_driver_name[];
346
347/* Number of status descriptors to handle per interrupt */
348#define MAX_STATUS_HANDLE (64)
349
350/*
351 * qlcnic_skb_frag{} is to contain mapping info for each SG list. This
352 * has to be freed when DMA is complete. This is part of qlcnic_tx_buffer{}.
353 */
354struct qlcnic_skb_frag {
355 u64 dma;
356 u64 length;
357};
358
359struct qlcnic_recv_crb {
360 u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
361 u32 crb_sts_consumer[NUM_STS_DESC_RINGS];
362 u32 sw_int_mask[NUM_STS_DESC_RINGS];
363};
364
365/* Following defines are for the state of the buffers */
366#define QLCNIC_BUFFER_FREE 0
367#define QLCNIC_BUFFER_BUSY 1
368
369/*
370 * There will be one qlcnic_buffer per skb packet. These will be
371 * used to save the dma info for pci_unmap_page()
372 */
373struct qlcnic_cmd_buffer {
374 struct sk_buff *skb;
375 struct qlcnic_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
376 u32 frag_count;
377};
378
379/* In rx_buffer, we do not need multiple fragments as is a single buffer */
380struct qlcnic_rx_buffer {
381 struct list_head list;
382 struct sk_buff *skb;
383 u64 dma;
384 u16 ref_handle;
385 u16 state;
386};
387
388/* Board types */
389#define QLCNIC_GBE 0x01
390#define QLCNIC_XGBE 0x02
391
392/*
393 * One hardware_context{} per adapter
394 * contains interrupt info as well shared hardware info.
395 */
396struct qlcnic_hardware_context {
397 void __iomem *pci_base0;
398 void __iomem *ocm_win_crb;
399
400 unsigned long pci_len0;
401
402 u32 ocm_win;
403 u32 crb_win;
404
405 rwlock_t crb_lock;
406 struct mutex mem_lock;
407
408 u8 cut_through;
409 u8 revision_id;
410 u8 pci_func;
411 u8 linkup;
412 u16 port_type;
413 u16 board_type;
414};
415
416struct qlcnic_adapter_stats {
417 u64 xmitcalled;
418 u64 xmitfinished;
419 u64 rxdropped;
420 u64 txdropped;
421 u64 csummed;
422 u64 rx_pkts;
423 u64 lro_pkts;
424 u64 rxbytes;
425 u64 txbytes;
426};
427
428/*
429 * Rcv Descriptor Context. One such per Rcv Descriptor. There may
430 * be one Rcv Descriptor for normal packets, one for jumbo and may be others.
431 */
432struct qlcnic_host_rds_ring {
433 u32 producer;
434 u32 num_desc;
435 u32 dma_size;
436 u32 skb_size;
437 u32 flags;
438 void __iomem *crb_rcv_producer;
439 struct rcv_desc *desc_head;
440 struct qlcnic_rx_buffer *rx_buf_arr;
441 struct list_head free_list;
442 spinlock_t lock;
443 dma_addr_t phys_addr;
444};
445
446struct qlcnic_host_sds_ring {
447 u32 consumer;
448 u32 num_desc;
449 void __iomem *crb_sts_consumer;
450 void __iomem *crb_intr_mask;
451
452 struct status_desc *desc_head;
453 struct qlcnic_adapter *adapter;
454 struct napi_struct napi;
455 struct list_head free_list[NUM_RCV_DESC_RINGS];
456
457 int irq;
458
459 dma_addr_t phys_addr;
460 char name[IFNAMSIZ+4];
461};
462
463struct qlcnic_host_tx_ring {
464 u32 producer;
465 __le32 *hw_consumer;
466 u32 sw_consumer;
467 void __iomem *crb_cmd_producer;
468 u32 num_desc;
469
470 struct netdev_queue *txq;
471
472 struct qlcnic_cmd_buffer *cmd_buf_arr;
473 struct cmd_desc_type0 *desc_head;
474 dma_addr_t phys_addr;
475 dma_addr_t hw_cons_phys_addr;
476};
477
478/*
479 * Receive context. There is one such structure per instance of the
480 * receive processing. Any state information that is relevant to
481 * the receive, and is must be in this structure. The global data may be
482 * present elsewhere.
483 */
484struct qlcnic_recv_context {
485 u32 state;
486 u16 context_id;
487 u16 virt_port;
488
489 struct qlcnic_host_rds_ring *rds_rings;
490 struct qlcnic_host_sds_ring *sds_rings;
491};
492
493/* HW context creation */
494
495#define QLCNIC_OS_CRB_RETRY_COUNT 4000
496#define QLCNIC_CDRP_SIGNATURE_MAKE(pcifn, version) \
497 (((pcifn) & 0xff) | (((version) & 0xff) << 8) | (0xcafe << 16))
498
499#define QLCNIC_CDRP_CMD_BIT 0x80000000
500
501/*
502 * All responses must have the QLCNIC_CDRP_CMD_BIT cleared
503 * in the crb QLCNIC_CDRP_CRB_OFFSET.
504 */
505#define QLCNIC_CDRP_FORM_RSP(rsp) (rsp)
506#define QLCNIC_CDRP_IS_RSP(rsp) (((rsp) & QLCNIC_CDRP_CMD_BIT) == 0)
507
508#define QLCNIC_CDRP_RSP_OK 0x00000001
509#define QLCNIC_CDRP_RSP_FAIL 0x00000002
510#define QLCNIC_CDRP_RSP_TIMEOUT 0x00000003
511
512/*
513 * All commands must have the QLCNIC_CDRP_CMD_BIT set in
514 * the crb QLCNIC_CDRP_CRB_OFFSET.
515 */
516#define QLCNIC_CDRP_FORM_CMD(cmd) (QLCNIC_CDRP_CMD_BIT | (cmd))
517#define QLCNIC_CDRP_IS_CMD(cmd) (((cmd) & QLCNIC_CDRP_CMD_BIT) != 0)
518
519#define QLCNIC_CDRP_CMD_SUBMIT_CAPABILITIES 0x00000001
520#define QLCNIC_CDRP_CMD_READ_MAX_RDS_PER_CTX 0x00000002
521#define QLCNIC_CDRP_CMD_READ_MAX_SDS_PER_CTX 0x00000003
522#define QLCNIC_CDRP_CMD_READ_MAX_RULES_PER_CTX 0x00000004
523#define QLCNIC_CDRP_CMD_READ_MAX_RX_CTX 0x00000005
524#define QLCNIC_CDRP_CMD_READ_MAX_TX_CTX 0x00000006
525#define QLCNIC_CDRP_CMD_CREATE_RX_CTX 0x00000007
526#define QLCNIC_CDRP_CMD_DESTROY_RX_CTX 0x00000008
527#define QLCNIC_CDRP_CMD_CREATE_TX_CTX 0x00000009
528#define QLCNIC_CDRP_CMD_DESTROY_TX_CTX 0x0000000a
529#define QLCNIC_CDRP_CMD_SETUP_STATISTICS 0x0000000e
530#define QLCNIC_CDRP_CMD_GET_STATISTICS 0x0000000f
531#define QLCNIC_CDRP_CMD_DELETE_STATISTICS 0x00000010
532#define QLCNIC_CDRP_CMD_SET_MTU 0x00000012
533#define QLCNIC_CDRP_CMD_READ_PHY 0x00000013
534#define QLCNIC_CDRP_CMD_WRITE_PHY 0x00000014
535#define QLCNIC_CDRP_CMD_READ_HW_REG 0x00000015
536#define QLCNIC_CDRP_CMD_GET_FLOW_CTL 0x00000016
537#define QLCNIC_CDRP_CMD_SET_FLOW_CTL 0x00000017
538#define QLCNIC_CDRP_CMD_READ_MAX_MTU 0x00000018
539#define QLCNIC_CDRP_CMD_READ_MAX_LRO 0x00000019
540#define QLCNIC_CDRP_CMD_CONFIGURE_TOE 0x0000001a
541#define QLCNIC_CDRP_CMD_FUNC_ATTRIB 0x0000001b
542#define QLCNIC_CDRP_CMD_READ_PEXQ_PARAMETERS 0x0000001c
543#define QLCNIC_CDRP_CMD_GET_LIC_CAPABILITIES 0x0000001d
544#define QLCNIC_CDRP_CMD_READ_MAX_LRO_PER_BOARD 0x0000001e
545#define QLCNIC_CDRP_CMD_MAX 0x0000001f
546
547#define QLCNIC_RCODE_SUCCESS 0
548#define QLCNIC_RCODE_TIMEOUT 17
549#define QLCNIC_DESTROY_CTX_RESET 0
550
551/*
552 * Capabilities Announced
553 */
554#define QLCNIC_CAP0_LEGACY_CONTEXT (1)
555#define QLCNIC_CAP0_LEGACY_MN (1 << 2)
556#define QLCNIC_CAP0_LSO (1 << 6)
557#define QLCNIC_CAP0_JUMBO_CONTIGUOUS (1 << 7)
558#define QLCNIC_CAP0_LRO_CONTIGUOUS (1 << 8)
559
560/*
561 * Context state
562 */
563#define QLCNIC_HOST_CTX_STATE_ACTIVE 2
564
565/*
566 * Rx context
567 */
568
569struct qlcnic_hostrq_sds_ring {
570 __le64 host_phys_addr; /* Ring base addr */
571 __le32 ring_size; /* Ring entries */
572 __le16 msi_index;
573 __le16 rsvd; /* Padding */
574};
575
576struct qlcnic_hostrq_rds_ring {
577 __le64 host_phys_addr; /* Ring base addr */
578 __le64 buff_size; /* Packet buffer size */
579 __le32 ring_size; /* Ring entries */
580 __le32 ring_kind; /* Class of ring */
581};
582
583struct qlcnic_hostrq_rx_ctx {
584 __le64 host_rsp_dma_addr; /* Response dma'd here */
585 __le32 capabilities[4]; /* Flag bit vector */
586 __le32 host_int_crb_mode; /* Interrupt crb usage */
587 __le32 host_rds_crb_mode; /* RDS crb usage */
588 /* These ring offsets are relative to data[0] below */
589 __le32 rds_ring_offset; /* Offset to RDS config */
590 __le32 sds_ring_offset; /* Offset to SDS config */
591 __le16 num_rds_rings; /* Count of RDS rings */
592 __le16 num_sds_rings; /* Count of SDS rings */
593 __le16 rsvd1; /* Padding */
594 __le16 rsvd2; /* Padding */
595 u8 reserved[128]; /* reserve space for future expansion*/
596 /* MUST BE 64-bit aligned.
597 The following is packed:
598 - N hostrq_rds_rings
599 - N hostrq_sds_rings */
600 char data[0];
601};
602
603struct qlcnic_cardrsp_rds_ring{
604 __le32 host_producer_crb; /* Crb to use */
605 __le32 rsvd1; /* Padding */
606};
607
608struct qlcnic_cardrsp_sds_ring {
609 __le32 host_consumer_crb; /* Crb to use */
610 __le32 interrupt_crb; /* Crb to use */
611};
612
613struct qlcnic_cardrsp_rx_ctx {
614 /* These ring offsets are relative to data[0] below */
615 __le32 rds_ring_offset; /* Offset to RDS config */
616 __le32 sds_ring_offset; /* Offset to SDS config */
617 __le32 host_ctx_state; /* Starting State */
618 __le32 num_fn_per_port; /* How many PCI fn share the port */
619 __le16 num_rds_rings; /* Count of RDS rings */
620 __le16 num_sds_rings; /* Count of SDS rings */
621 __le16 context_id; /* Handle for context */
622 u8 phys_port; /* Physical id of port */
623 u8 virt_port; /* Virtual/Logical id of port */
624 u8 reserved[128]; /* save space for future expansion */
625 /* MUST BE 64-bit aligned.
626 The following is packed:
627 - N cardrsp_rds_rings
628 - N cardrs_sds_rings */
629 char data[0];
630};
631
632#define SIZEOF_HOSTRQ_RX(HOSTRQ_RX, rds_rings, sds_rings) \
633 (sizeof(HOSTRQ_RX) + \
634 (rds_rings)*(sizeof(struct qlcnic_hostrq_rds_ring)) + \
635 (sds_rings)*(sizeof(struct qlcnic_hostrq_sds_ring)))
636
637#define SIZEOF_CARDRSP_RX(CARDRSP_RX, rds_rings, sds_rings) \
638 (sizeof(CARDRSP_RX) + \
639 (rds_rings)*(sizeof(struct qlcnic_cardrsp_rds_ring)) + \
640 (sds_rings)*(sizeof(struct qlcnic_cardrsp_sds_ring)))
641
642/*
643 * Tx context
644 */
645
646struct qlcnic_hostrq_cds_ring {
647 __le64 host_phys_addr; /* Ring base addr */
648 __le32 ring_size; /* Ring entries */
649 __le32 rsvd; /* Padding */
650};
651
652struct qlcnic_hostrq_tx_ctx {
653 __le64 host_rsp_dma_addr; /* Response dma'd here */
654 __le64 cmd_cons_dma_addr; /* */
655 __le64 dummy_dma_addr; /* */
656 __le32 capabilities[4]; /* Flag bit vector */
657 __le32 host_int_crb_mode; /* Interrupt crb usage */
658 __le32 rsvd1; /* Padding */
659 __le16 rsvd2; /* Padding */
660 __le16 interrupt_ctl;
661 __le16 msi_index;
662 __le16 rsvd3; /* Padding */
663 struct qlcnic_hostrq_cds_ring cds_ring; /* Desc of cds ring */
664 u8 reserved[128]; /* future expansion */
665};
666
667struct qlcnic_cardrsp_cds_ring {
668 __le32 host_producer_crb; /* Crb to use */
669 __le32 interrupt_crb; /* Crb to use */
670};
671
672struct qlcnic_cardrsp_tx_ctx {
673 __le32 host_ctx_state; /* Starting state */
674 __le16 context_id; /* Handle for context */
675 u8 phys_port; /* Physical id of port */
676 u8 virt_port; /* Virtual/Logical id of port */
677 struct qlcnic_cardrsp_cds_ring cds_ring; /* Card cds settings */
678 u8 reserved[128]; /* future expansion */
679};
680
681#define SIZEOF_HOSTRQ_TX(HOSTRQ_TX) (sizeof(HOSTRQ_TX))
682#define SIZEOF_CARDRSP_TX(CARDRSP_TX) (sizeof(CARDRSP_TX))
683
684/* CRB */
685
686#define QLCNIC_HOST_RDS_CRB_MODE_UNIQUE 0
687#define QLCNIC_HOST_RDS_CRB_MODE_SHARED 1
688#define QLCNIC_HOST_RDS_CRB_MODE_CUSTOM 2
689#define QLCNIC_HOST_RDS_CRB_MODE_MAX 3
690
691#define QLCNIC_HOST_INT_CRB_MODE_UNIQUE 0
692#define QLCNIC_HOST_INT_CRB_MODE_SHARED 1
693#define QLCNIC_HOST_INT_CRB_MODE_NORX 2
694#define QLCNIC_HOST_INT_CRB_MODE_NOTX 3
695#define QLCNIC_HOST_INT_CRB_MODE_NORXTX 4
696
697
698/* MAC */
699
700#define MC_COUNT_P3 38
701
702#define QLCNIC_MAC_NOOP 0
703#define QLCNIC_MAC_ADD 1
704#define QLCNIC_MAC_DEL 2
705
706struct qlcnic_mac_list_s {
707 struct list_head list;
708 uint8_t mac_addr[ETH_ALEN+2];
709};
710
711/*
712 * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
713 * adjusted based on configured MTU.
714 */
715#define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US 3
716#define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS 256
717#define QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS 64
718#define QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US 4
719
720#define QLCNIC_INTR_DEFAULT 0x04
721
722union qlcnic_nic_intr_coalesce_data {
723 struct {
724 u16 rx_packets;
725 u16 rx_time_us;
726 u16 tx_packets;
727 u16 tx_time_us;
728 } data;
729 u64 word;
730};
731
732struct qlcnic_nic_intr_coalesce {
733 u16 stats_time_us;
734 u16 rate_sample_time;
735 u16 flags;
736 u16 rsvd_1;
737 u32 low_threshold;
738 u32 high_threshold;
739 union qlcnic_nic_intr_coalesce_data normal;
740 union qlcnic_nic_intr_coalesce_data low;
741 union qlcnic_nic_intr_coalesce_data high;
742 union qlcnic_nic_intr_coalesce_data irq;
743};
744
745#define QLCNIC_HOST_REQUEST 0x13
746#define QLCNIC_REQUEST 0x14
747
748#define QLCNIC_MAC_EVENT 0x1
749
750#define QLCNIC_IP_UP 2
751#define QLCNIC_IP_DOWN 3
752
753/*
754 * Driver --> Firmware
755 */
756#define QLCNIC_H2C_OPCODE_START 0
757#define QLCNIC_H2C_OPCODE_CONFIG_RSS 1
758#define QLCNIC_H2C_OPCODE_CONFIG_RSS_TBL 2
759#define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE 3
760#define QLCNIC_H2C_OPCODE_CONFIG_LED 4
761#define QLCNIC_H2C_OPCODE_CONFIG_PROMISCUOUS 5
762#define QLCNIC_H2C_OPCODE_CONFIG_L2_MAC 6
763#define QLCNIC_H2C_OPCODE_LRO_REQUEST 7
764#define QLCNIC_H2C_OPCODE_GET_SNMP_STATS 8
765#define QLCNIC_H2C_OPCODE_PROXY_START_REQUEST 9
766#define QLCNIC_H2C_OPCODE_PROXY_STOP_REQUEST 10
767#define QLCNIC_H2C_OPCODE_PROXY_SET_MTU 11
768#define QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE 12
769#define QLCNIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST 13
770#define QLCNIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST 14
771#define QLCNIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST 15
772#define QLCNIC_H2C_OPCODE_GET_NET_STATS 16
773#define QLCNIC_H2C_OPCODE_PROXY_UPDATE_P2V 17
774#define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 18
775#define QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK 19
776#define QLCNIC_H2C_OPCODE_PROXY_STOP_DONE 20
777#define QLCNIC_H2C_OPCODE_GET_LINKEVENT 21
778#define QLCNIC_C2C_OPCODE 22
779#define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING 23
780#define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO 24
781#define QLCNIC_H2C_OPCODE_LAST 25
782/*
783 * Firmware --> Driver
784 */
785
786#define QLCNIC_C2H_OPCODE_START 128
787#define QLCNIC_C2H_OPCODE_CONFIG_RSS_RESPONSE 129
788#define QLCNIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE 130
789#define QLCNIC_C2H_OPCODE_CONFIG_MAC_RESPONSE 131
790#define QLCNIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE 132
791#define QLCNIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE 133
792#define QLCNIC_C2H_OPCODE_LRO_DELETE_RESPONSE 134
793#define QLCNIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE 135
794#define QLCNIC_C2H_OPCODE_GET_SNMP_STATS 136
795#define QLCNIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY 137
796#define QLCNIC_C2H_OPCODE_INSTALL_LICENSE_REPLY 138
797#define QLCNIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139
798#define QLCNIC_C2H_OPCODE_GET_NET_STATS_RESPONSE 140
799#define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE 141
800#define QLCNIC_C2H_OPCODE_LAST 142
801
802#define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */
803#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */
804#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */
805
806#define QLCNIC_LRO_REQUEST_CLEANUP 4
807
808/* Capabilites received */
809#define QLCNIC_FW_CAPABILITY_BDG (1 << 8)
810#define QLCNIC_FW_CAPABILITY_FVLANTX (1 << 9)
811#define QLCNIC_FW_CAPABILITY_HW_LRO (1 << 10)
812
813/* module types */
814#define LINKEVENT_MODULE_NOT_PRESENT 1
815#define LINKEVENT_MODULE_OPTICAL_UNKNOWN 2
816#define LINKEVENT_MODULE_OPTICAL_SRLR 3
817#define LINKEVENT_MODULE_OPTICAL_LRM 4
818#define LINKEVENT_MODULE_OPTICAL_SFP_1G 5
819#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE 6
820#define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN 7
821#define LINKEVENT_MODULE_TWINAX 8
822
823#define LINKSPEED_10GBPS 10000
824#define LINKSPEED_1GBPS 1000
825#define LINKSPEED_100MBPS 100
826#define LINKSPEED_10MBPS 10
827
828#define LINKSPEED_ENCODED_10MBPS 0
829#define LINKSPEED_ENCODED_100MBPS 1
830#define LINKSPEED_ENCODED_1GBPS 2
831
832#define LINKEVENT_AUTONEG_DISABLED 0
833#define LINKEVENT_AUTONEG_ENABLED 1
834
835#define LINKEVENT_HALF_DUPLEX 0
836#define LINKEVENT_FULL_DUPLEX 1
837
838#define LINKEVENT_LINKSPEED_MBPS 0
839#define LINKEVENT_LINKSPEED_ENCODED 1
840
841#define AUTO_FW_RESET_ENABLED 0x01
842/* firmware response header:
843 * 63:58 - message type
844 * 57:56 - owner
845 * 55:53 - desc count
846 * 52:48 - reserved
847 * 47:40 - completion id
848 * 39:32 - opcode
849 * 31:16 - error code
850 * 15:00 - reserved
851 */
852#define qlcnic_get_nic_msg_opcode(msg_hdr) \
853 ((msg_hdr >> 32) & 0xFF)
854
855struct qlcnic_fw_msg {
856 union {
857 struct {
858 u64 hdr;
859 u64 body[7];
860 };
861 u64 words[8];
862 };
863};
864
865struct qlcnic_nic_req {
866 __le64 qhdr;
867 __le64 req_hdr;
868 __le64 words[6];
869};
870
871struct qlcnic_mac_req {
872 u8 op;
873 u8 tag;
874 u8 mac_addr[6];
875};
876
877#define QLCNIC_MSI_ENABLED 0x02
878#define QLCNIC_MSIX_ENABLED 0x04
879#define QLCNIC_LRO_ENABLED 0x08
880#define QLCNIC_BRIDGE_ENABLED 0X10
881#define QLCNIC_DIAG_ENABLED 0x20
882#define QLCNIC_IS_MSI_FAMILY(adapter) \
883 ((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
884
885#define MSIX_ENTRIES_PER_ADAPTER NUM_STS_DESC_RINGS
886#define QLCNIC_MSIX_TBL_SPACE 8192
887#define QLCNIC_PCI_REG_MSIX_TBL 0x44
888
889#define QLCNIC_NETDEV_WEIGHT 128
890#define QLCNIC_ADAPTER_UP_MAGIC 777
891
892#define __QLCNIC_FW_ATTACHED 0
893#define __QLCNIC_DEV_UP 1
894#define __QLCNIC_RESETTING 2
895#define __QLCNIC_START_FW 4
896
897struct qlcnic_adapter {
898 struct qlcnic_hardware_context ahw;
899
900 struct net_device *netdev;
901 struct pci_dev *pdev;
902 struct list_head mac_list;
903
904 spinlock_t tx_clean_lock;
905
906 u16 num_txd;
907 u16 num_rxd;
908 u16 num_jumbo_rxd;
909 u16 num_lro_rxd;
910
911 u8 max_rds_rings;
912 u8 max_sds_rings;
913 u8 driver_mismatch;
914 u8 msix_supported;
915 u8 rx_csum;
916 u8 pci_using_dac;
917 u8 portnum;
918 u8 physical_port;
919
920 u8 mc_enabled;
921 u8 max_mc_count;
922 u8 rss_supported;
923 u8 rsrvd1;
924 u8 fw_wait_cnt;
925 u8 fw_fail_cnt;
926 u8 tx_timeo_cnt;
927 u8 need_fw_reset;
928
929 u8 has_link_events;
930 u8 fw_type;
931 u16 tx_context_id;
932 u16 mtu;
933 u16 is_up;
934
935 u16 link_speed;
936 u16 link_duplex;
937 u16 link_autoneg;
938 u16 module_type;
939
940 u32 capabilities;
941 u32 flags;
942 u32 irq;
943 u32 temp;
944
945 u32 int_vec_bit;
946 u32 heartbit;
947
948 u8 dev_state;
949 u8 rsrd1;
950 u32 rsrd2;
951
952
953 u8 mac_addr[ETH_ALEN];
954
955 struct qlcnic_adapter_stats stats;
956
957 struct qlcnic_recv_context recv_ctx;
958 struct qlcnic_host_tx_ring *tx_ring;
959
960 void __iomem *tgt_mask_reg;
961 void __iomem *tgt_status_reg;
962 void __iomem *crb_int_state_reg;
963 void __iomem *isr_int_vec;
964
965 struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
966
967 struct delayed_work fw_work;
968
969 struct work_struct tx_timeout_task;
970
971 struct qlcnic_nic_intr_coalesce coal;
972
973 unsigned long state;
974 __le32 file_prd_off; /*File fw product offset*/
975 u32 fw_version;
976 const struct firmware *fw;
977};
978
979int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
980int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
981
982u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off);
983int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
984int qlcnic_pci_mem_write_2M(struct qlcnic_adapter *, u64 off, u64 data);
985int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *, u64 off, u64 *data);
986
987#define QLCRD32(adapter, off) \
988 (qlcnic_hw_read_wx_2M(adapter, off))
989#define QLCWR32(adapter, off, val) \
990 (qlcnic_hw_write_wx_2M(adapter, off, val))
991
992int qlcnic_pcie_sem_lock(struct qlcnic_adapter *, int, u32);
993void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int);
994
995#define qlcnic_rom_lock(a) \
996 qlcnic_pcie_sem_lock((a), 2, QLCNIC_ROM_LOCK_ID)
997#define qlcnic_rom_unlock(a) \
998 qlcnic_pcie_sem_unlock((a), 2)
999#define qlcnic_phy_lock(a) \
1000 qlcnic_pcie_sem_lock((a), 3, QLCNIC_PHY_LOCK_ID)
1001#define qlcnic_phy_unlock(a) \
1002 qlcnic_pcie_sem_unlock((a), 3)
1003#define qlcnic_api_lock(a) \
1004 qlcnic_pcie_sem_lock((a), 5, 0)
1005#define qlcnic_api_unlock(a) \
1006 qlcnic_pcie_sem_unlock((a), 5)
1007#define qlcnic_sw_lock(a) \
1008 qlcnic_pcie_sem_lock((a), 6, 0)
1009#define qlcnic_sw_unlock(a) \
1010 qlcnic_pcie_sem_unlock((a), 6)
1011#define crb_win_lock(a) \
1012 qlcnic_pcie_sem_lock((a), 7, QLCNIC_CRB_WIN_LOCK_ID)
1013#define crb_win_unlock(a) \
1014 qlcnic_pcie_sem_unlock((a), 7)
1015
1016int qlcnic_get_board_info(struct qlcnic_adapter *adapter);
1017int qlcnic_wol_supported(struct qlcnic_adapter *adapter);
1018
1019/* Functions from qlcnic_init.c */
1020int qlcnic_phantom_init(struct qlcnic_adapter *adapter);
1021int qlcnic_load_firmware(struct qlcnic_adapter *adapter);
1022int qlcnic_need_fw_reset(struct qlcnic_adapter *adapter);
1023void qlcnic_request_firmware(struct qlcnic_adapter *adapter);
1024void qlcnic_release_firmware(struct qlcnic_adapter *adapter);
1025int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter);
1026
1027int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp);
1028int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr,
1029 u8 *bytes, size_t size);
1030int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter);
1031void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter);
1032
1033void __iomem *qlcnic_get_ioaddr(struct qlcnic_adapter *, u32);
1034
1035int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter);
1036void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter);
1037
1038void qlcnic_release_rx_buffers(struct qlcnic_adapter *adapter);
1039void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter);
1040
1041int qlcnic_init_firmware(struct qlcnic_adapter *adapter);
1042void qlcnic_watchdog_task(struct work_struct *work);
1043void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid,
1044 struct qlcnic_host_rds_ring *rds_ring);
1045int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max);
1046void qlcnic_set_multi(struct net_device *netdev);
1047void qlcnic_free_mac_list(struct qlcnic_adapter *adapter);
1048int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32);
1049int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter);
1050int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable);
1051int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd);
1052int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, int enable);
1053void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup);
1054
1055int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu);
1056int qlcnic_change_mtu(struct net_device *netdev, int new_mtu);
1057int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable);
1058int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, int enable);
1059int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter);
1060void qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
1061 struct qlcnic_host_tx_ring *tx_ring);
1062int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u64 *mac);
1063
1064/* Functions from qlcnic_main.c */
1065int qlcnic_reset_context(struct qlcnic_adapter *);
1066
1067/*
1068 * QLOGIC Board information
1069 */
1070
1071#define QLCNIC_MAX_BOARD_NAME_LEN 64
1072struct qlcnic_brdinfo {
1073 unsigned short vendor;
1074 unsigned short device;
1075 unsigned short sub_vendor;
1076 unsigned short sub_device;
1077 char short_name[QLCNIC_MAX_BOARD_NAME_LEN];
1078};
1079
1080static const struct qlcnic_brdinfo qlcnic_boards[] = {
1081 {0x1077, 0x8020, 0x1077, 0x203, "8200 Series Single Port 10GbE CNA"},
1082 {0x1077, 0x8020, 0x1077, 0x207, "8200 Series Dual Port 10GbE CNA"},
1083 {0x1077, 0x8020, 0x1077, 0x20b,
1084 "3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"},
1085 {0x1077, 0x8020, 0x1077, 0x20c,
1086 "3200 Series Quad Port 1Gb Intelligent Ethernet Adapter"},
1087 {0x1077, 0x8020, 0x1077, 0x20f,
1088 "3200 Series Single Port 10Gb Intelligent Ethernet Adapter"},
1089 {0x1077, 0x8020, 0x0, 0x0, "cLOM8214 1/10GbE Controller"},
1090};
1091
1092#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(qlcnic_boards)
1093
1094static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring)
1095{
1096 smp_mb();
1097 if (tx_ring->producer < tx_ring->sw_consumer)
1098 return tx_ring->sw_consumer - tx_ring->producer;
1099 else
1100 return tx_ring->sw_consumer + tx_ring->num_desc -
1101 tx_ring->producer;
1102}
1103
1104extern const struct ethtool_ops qlcnic_ethtool_ops;
1105
1106#endif /* __QLCNIC_H_ */