Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 025a1f5029497c12a800a10d4540bf2313413b59 / . / drivers / regulator / Kconfig
blob: a5d97eaee99e3085ad5dd8c5c5d294511b374c5f [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]31config REGULATOR_DUMMY
32 bool "Provide a dummy regulator if regulator lookups fail"
33 help
34 If this option is enabled then when a regulator lookup fails
35 and the board has not specified that it has provided full
Mark Brown4f842f62012-07-26 15:50:49 +0100[diff] [blame]36 constraints the regulator core will provide an always
37 enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]38
39 A warning will be generated when this substitution is done.
40
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]41config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]42 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]43 help
44 This driver provides support for fixed voltage regulators,
45 useful for systems which use a combination of software
46 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
48config REGULATOR_VIRTUAL_CONSUMER
49 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]50 help
51 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]52 current regulator API which provides sysfs controls for
53 configuring the supplies requested. This is mainly useful
54 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]55
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]56 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]57
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]58config REGULATOR_USERSPACE_CONSUMER
59 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]60 help
61 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]62 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]63 control power supplies for such devices.
64
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]65 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]66
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]67config REGULATOR_GPIO
68 tristate "GPIO regulator support"
Heiko Stübnerd162b3c2011-10-11 23:11:01 +0200[diff] [blame]69 depends on GENERIC_GPIO
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]70 help
71 This driver provides support for regulators that can be
72 controlled via gpios.
73 It is capable of supporting current and voltage regulators
74 and the platform has to provide a mapping of GPIO-states
75 to target volts/amps.
76
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]77config REGULATOR_AD5398
78 tristate "Analog Devices AD5398/AD5821 regulators"
79 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]80 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]81 This driver supports AD5398 and AD5821 current regulator chips.
82 If building into module, its name is ad5398.ko.
83
84config REGULATOR_AAT2870
85 tristate "AnalogicTech AAT2870 Regulators"
86 depends on MFD_AAT2870_CORE
87 help
88 If you have a AnalogicTech AAT2870 say Y to enable the
89 regulator driver.
90
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]91config REGULATOR_ARIZONA
92 tristate "Wolfson Arizona class devices"
93 depends on MFD_ARIZONA
Mark Browne6ed9052013-01-10 19:14:11 +0000[diff] [blame]94 depends on SND_SOC
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]95 help
96 Support for the regulators found on Wolfson Arizona class
97 devices.
98
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]99config REGULATOR_DA903X
100 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
101 depends on PMIC_DA903X
102 help
103 Say y here to support the BUCKs and LDOs regulators found on
104 Dialog Semiconductor DA9030/DA9034 PMIC.
105
106config REGULATOR_DA9052
107 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
108 depends on PMIC_DA9052
109 help
110 This driver supports the voltage regulators of DA9052-BC and
111 DA9053-AA/Bx PMIC.
112
Ashish Jangamf6130be2012-11-01 13:57:56 +0530[diff] [blame]113config REGULATOR_DA9055
114 tristate "Dialog Semiconductor DA9055 regulators"
115 depends on MFD_DA9055
116 help
117 Say y here to support the BUCKs and LDOs regulators found on
118 Dialog Semiconductor DA9055 PMIC.
119
120 This driver can also be built as a module. If so, the module
121 will be called da9055-regulator.
122
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]123config REGULATOR_FAN53555
124 tristate "Fairchild FAN53555 Regulator"
125 depends on I2C
126 select REGMAP_I2C
127 help
128 This driver supports Fairchild FAN53555 Digitally Programmable
129 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
130 regulator that delivers a digitally programmable output from an
131 input voltage supply of 2.5V to 5.5V. The output voltage is
132 programmed through an I2C interface.
133
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]134config REGULATOR_ANATOP
135 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
Dong Aishengbaa64152012-09-05 10:57:15 +0800[diff] [blame]136 depends on MFD_SYSCON
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]137 help
138 Say y here to support Freescale i.MX on-chip ANATOP LDOs
139 regulators. It is recommended that this option be
140 enabled on i.MX6 platform.
141
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]142config REGULATOR_MC13XXX_CORE
143 tristate
144
145config REGULATOR_MC13783
146 tristate "Freescale MC13783 regulator driver"
147 depends on MFD_MC13783
148 select REGULATOR_MC13XXX_CORE
149 help
150 Say y here to support the regulators found on the Freescale MC13783
151 PMIC.
152
153config REGULATOR_MC13892
154 tristate "Freescale MC13892 regulator driver"
155 depends on MFD_MC13XXX
156 select REGULATOR_MC13XXX_CORE
157 help
158 Say y here to support the regulators found on the Freescale MC13892
159 PMIC.
160
161config REGULATOR_ISL6271A
162 tristate "Intersil ISL6271A Power regulator"
163 depends on I2C
164 help
165 This driver supports ISL6271A voltage regulator chip.
166
167config REGULATOR_88PM8607
168 bool "Marvell 88PM8607 Power regulators"
169 depends on MFD_88PM860X=y
170 help
171 This driver supports 88PM8607 voltage regulator chips.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]172
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]173config REGULATOR_MAX1586
174 tristate "Maxim 1586/1587 voltage regulator"
175 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]176 help
177 This driver controls a Maxim 1586 or 1587 voltage output
178 regulator via I2C bus. The provided regulator is suitable
179 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
180
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]181config REGULATOR_MAX8649
182 tristate "Maxim 8649 voltage regulator"
183 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]184 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]185 help
186 This driver controls a Maxim 8649 voltage output regulator via
187 I2C bus.
188
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]189config REGULATOR_MAX8660
190 tristate "Maxim 8660/8661 voltage regulator"
191 depends on I2C
192 help
193 This driver controls a Maxim 8660/8661 voltage output
194 regulator via I2C bus.
195
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]196config REGULATOR_MAX8907
197 tristate "Maxim 8907 voltage regulator"
198 depends on MFD_MAX8907
199 help
200 This driver controls a Maxim 8907 voltage output regulator
201 via I2C bus. The provided regulator is suitable for Tegra
202 chip to control Step-Down DC-DC and LDOs.
203
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]204config REGULATOR_MAX8925
205 tristate "Maxim MAX8925 Power Management IC"
206 depends on MFD_MAX8925
207 help
208 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
209
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]210config REGULATOR_MAX8952
211 tristate "Maxim MAX8952 Power Management IC"
212 depends on I2C
213 help
214 This driver controls a Maxim 8952 voltage output regulator
215 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
216 modes ranging from 0.77V to 1.40V by 0.01V steps.
217
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame]218config REGULATOR_MAX8973
219 tristate "Maxim MAX8973 voltage regulator "
220 depends on I2C
221 select REGMAP_I2C
222 help
223 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
224 switching regulator delievers up to 9A of output current. Each
225 phase operates at a 2MHz fixed frequency with a 120 deg shift
226 from the adjacent phase, allowing the use of small magnetic component.
227
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]228config REGULATOR_MAX8997
229 tristate "Maxim 8997/8966 regulator"
230 depends on MFD_MAX8997
231 help
232 This driver controls a Maxim 8997/8966 regulator
233 via I2C bus. The provided regulator is suitable for S5PC110,
234 S5PV210, and Exynos-4 chips to control VCC_CORE and
235 VCC_USIM voltages.
236
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]237config REGULATOR_MAX8998
238 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]239 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]240 help
241 This driver controls a Maxim 8998 voltage output regulator
242 via I2C bus. The provided regulator is suitable for S3C6410
243 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
244
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]245config REGULATOR_MAX77686
246 tristate "Maxim 77686 regulator"
247 depends on MFD_MAX77686
248 help
249 This driver controls a Maxim 77686 regulator
250 via I2C bus. The provided regulator is suitable for
251 Exynos-4 chips to control VARM and VINT voltages.
252
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]253config REGULATOR_PCAP
254 tristate "Motorola PCAP2 regulator driver"
255 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]256 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]257 This driver provides support for the voltage regulators of the
258 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]259
Marek Szyprowski0cbdf7b2009-05-19 07:33:55 +0200[diff] [blame]260config REGULATOR_LP3971
261 tristate "National Semiconductors LP3971 PMIC regulator driver"
262 depends on I2C
263 help
264 Say Y here to support the voltage regulators and convertors
265 on National Semiconductors LP3971 PMIC
266
Axel Lin5976f092010-09-16 16:48:49 +0800[diff] [blame]267config REGULATOR_LP3972
268 tristate "National Semiconductors LP3972 PMIC regulator driver"
269 depends on I2C
270 help
271 Say Y here to support the voltage regulators and convertors
272 on National Semiconductors LP3972 PMIC
273
Kim, Miloaf8b5fc2012-06-19 07:08:22 +0000[diff] [blame]274config REGULATOR_LP872X
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]275 bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Mark Browndc2060c2012-06-21 10:35:58 +0100[diff] [blame]276 depends on I2C=y
Kim, Miloaf8b5fc2012-06-19 07:08:22 +0000[diff] [blame]277 select REGMAP_I2C
278 help
279 This driver supports LP8720/LP8725 PMIC
280
Daniel Jeongb59320c2012-12-17 10:24:06 +0900[diff] [blame]281config REGULATOR_LP8755
282 tristate "TI LP8755 High Performance PMU driver"
283 depends on I2C
284 select REGMAP_I2C
285 help
286 This driver supports LP8755 High Performance PMU driver. This
287 chip contains six step-down DC/DC converters which can support
288 9 mode multiphase configuration.
289
Kim, Miloade75152012-07-18 14:32:57 +0000[diff] [blame]290config REGULATOR_LP8788
291 bool "TI LP8788 Power Regulators"
292 depends on MFD_LP8788
293 help
294 This driver supports LP8788 voltage regulator chip.
295
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]296config REGULATOR_PCF50633
297 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]298 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]299 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]300 Say Y here to support the voltage regulators and convertors
301 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]302
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]303config REGULATOR_RC5T583
304 tristate "RICOH RC5T583 Power regulators"
305 depends on MFD_RC5T583
306 help
307 Select this option to enable the power regulator of RICOH
308 PMIC RC5T583.
309 This driver supports the control of different power rails of device
310 through regulator interface. The device supports multiple DCDC/LDO
311 outputs which can be controlled by i2c communication.
312
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]313config REGULATOR_S2MPS11
314 tristate "Samsung S2MPS11 voltage regulator"
315 depends on MFD_SEC_CORE
316 help
317 This driver supports a Samsung S2MPS11 voltage output regulator
318 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
319 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
320
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]321config REGULATOR_S5M8767
322 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]323 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]324 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]325 This driver supports a Samsung S5M8767A voltage output regulator
326 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
327 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]328
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]329config REGULATOR_AB3100
330 tristate "ST-Ericsson AB3100 Regulator functions"
331 depends on AB3100_CORE
332 default y if AB3100_CORE
333 help
334 These regulators correspond to functionality in the
335 AB3100 analog baseband dealing with power regulators
336 for the system.
337
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]338config REGULATOR_AB8500
339 bool "ST-Ericsson AB8500 Power Regulators"
340 depends on AB8500_CORE
341 help
342 This driver supports the regulators found on the ST-Ericsson mixed
343 signal AB8500 PMIC
344
345config REGULATOR_DBX500_PRCMU
346 bool
347
348config REGULATOR_DB8500_PRCMU
349 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
350 depends on MFD_DB8500_PRCMU
351 select REGULATOR_DBX500_PRCMU
352 help
353 This driver supports the voltage domain regulators controlled by the
354 DB8500 PRCMU
355
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]356config REGULATOR_PALMAS
357 tristate "TI Palmas PMIC Regulators"
358 depends on MFD_PALMAS
359 help
360 If you wish to control the regulators on the Palmas series of
361 chips say Y here. This will enable support for all the software
362 controllable SMPS/LDO regulators.
363
364 The regulators available on Palmas series chips vary depending
365 on the muxing. This is handled automatically in the driver by
366 reading the mux info from OTP.
367
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]368config REGULATOR_TPS51632
369 tristate "TI TPS51632 Power Regulator"
370 depends on I2C
371 select REGMAP_I2C
372 help
373 This driver supports TPS51632 voltage regulator chip.
Axel Lin7bde7672012-11-01 14:02:36 +0800[diff] [blame]374 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]375 with Serial VID control and DVFS.
376 The voltage output can be configure through I2C interface or PWM
377 interface.
378
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]379config REGULATOR_TPS6105X
380 tristate "TI TPS6105X Power regulators"
381 depends on TPS6105X
382 default y if TPS6105X
383 help
384 This driver supports TPS61050/TPS61052 voltage regulator chips.
385 It is a single boost converter primarily for white LEDs and
386 audio amplifiers.
387
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]388config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]389 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]390 depends on I2C
391 select REGMAP_I2C
392 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]393 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]394 regulator is meant for processor core supply. This chip is
395 high-frequency synchronous step down dc-dc converter optimized
396 for battery-powered portable applications.
397
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]398config REGULATOR_TPS65023
399 tristate "TI TPS65023 Power regulators"
400 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]401 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]402 help
403 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
404 three step-down converters and two general-purpose LDO voltage regulators.
405 It supports TI's software based Class-2 SmartReflex implementation.
406
407config REGULATOR_TPS6507X
408 tristate "TI TPS6507X Power regulators"
409 depends on I2C
410 help
411 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
412 three step-down converters and two general-purpose LDO voltage regulators.
413 It supports TI's software based Class-2 SmartReflex implementation.
414
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]415config REGULATOR_TPS65090
416 tristate "TI TPS65090 Power regulator"
417 depends on MFD_TPS65090
418 help
419 This driver provides support for the voltage regulators on the
420 TI TPS65090 PMIC.
421
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]422config REGULATOR_TPS65217
423 tristate "TI TPS65217 Power regulators"
424 depends on MFD_TPS65217
425 help
426 This driver supports TPS65217 voltage regulator chips. TPS65217
427 provides three step-down converters and four general-purpose LDO
428 voltage regulators. It supports software based voltage control
429 for different voltage domains
430
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]431config REGULATOR_TPS6524X
432 tristate "TI TPS6524X Power regulators"
433 depends on SPI
434 help
435 This driver supports TPS6524X voltage regulator chips. TPS6524X
436 provides three step-down converters and two general-purpose LDO
437 voltage regulators. This device is interfaced using a customized
438 serial interface currently supported on the sequencer serial
439 port controller.
440
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]441config REGULATOR_TPS6586X
442 tristate "TI TPS6586X Power regulators"
443 depends on MFD_TPS6586X
444 help
445 This driver supports TPS6586X voltage regulator chips.
446
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]447config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]448 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]449 depends on MFD_TPS65910
450 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]451 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]452
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]453config REGULATOR_TPS65912
454 tristate "TI TPS65912 Power regulator"
455 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan6219929f2012-01-09 20:27:41 +0530[diff] [blame]456 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]457 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan6219929f2012-01-09 20:27:41 +0530[diff] [blame]458
Laxman Dewangan1a0bb672012-11-11 20:42:01 +0530[diff] [blame]459config REGULATOR_TPS80031
460 tristate "TI TPS80031/TPS80032 power regualtor driver"
461 depends on MFD_TPS80031
462 help
463 TPS80031/ TPS80032 Fully Integrated Power Management with Power
464 Path and Battery Charger. It has 5 configurable step-down
465 converters, 11 general purpose LDOs, VBUS generator and digital
466 output to control regulators.
467
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]468config REGULATOR_TWL4030
469 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
470 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]471 help
472 This driver supports the voltage regulators provided by
473 this family of companion chips.
474
Pawel Moll31e54082012-09-24 18:56:54 +0100[diff] [blame]475config REGULATOR_VEXPRESS
476 tristate "Versatile Express regulators"
477 depends on VEXPRESS_CONFIG
478 help
479 This driver provides support for voltage regulators available
480 on the ARM Ltd's Versatile Express platform.
481
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]482config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]483 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]484 depends on MFD_WM831X
485 help
486 Support the voltage and current regulators of the WM831x series
487 of PMIC devices.
488
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]489config REGULATOR_WM8350
490 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
491 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]492 help
493 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]494 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]495
496config REGULATOR_WM8400
497 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
498 depends on MFD_WM8400
499 help
500 This driver provides support for the voltage regulators of the
501 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]502
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]503config REGULATOR_WM8994
504 tristate "Wolfson Microelectronics WM8994 CODEC"
505 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]506 help
507 This driver provides support for the voltage regulators on the
508 WM8994 CODEC.
509
Guennadi Liakhovetskif1e64f92012-11-22 11:12:08 +0100[diff] [blame]510config REGULATOR_AS3711
511 tristate "AS3711 PMIC"
512 depends on MFD_AS3711
513 help
514 This driver provides support for the voltage regulators on the
515 AS3711 PMIC
516
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]517endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]518