drivers/net/smc-mca.c

/* smc-mca.c: A SMC Ultra ethernet driver for linux. */
/*
    Most of this driver, except for ultramca_probe is nearly
    verbatim from smc-ultra.c by Donald Becker. The rest is
    written and copyright 1996 by David Weis, weisd3458@uni.edu

    This is a driver for the SMC Ultra and SMC EtherEZ ethercards.

    This driver uses the cards in the 8390-compatible, shared memory mode.
    Most of the run-time complexity is handled by the generic code in
    8390.c.

    This driver enables the shared memory only when doing the actual data
    transfers to avoid a bug in early version of the card that corrupted
    data transferred by a AHA1542.

    This driver does not support the programmed-I/O data transfer mode of
    the EtherEZ.  That support (if available) is smc-ez.c.  Nor does it
    use the non-8390-compatible "Altego" mode. (No support currently planned.)

    Changelog:

    Paul Gortmaker	 : multiple card support for module users.
    David Weis		 : Micro Channel-ized it.
    Tom Sightler	 : Added support for IBM PS/2 Ethernet Adapter/A
    Christopher Turcksin : Changed MCA-probe so that multiple adapters are
			   found correctly (Jul 16, 1997)
    Chris Beauregard	 : Tried to merge the two changes above (Dec 15, 1997)
    Tom Sightler	 : Fixed minor detection bug caused by above merge
    Tom Sightler	 : Added support for three more Western Digital
			   MCA-adapters
    Tom Sightler	 : Added support for 2.2.x mca_find_unused_adapter
    Hartmut Schmidt	 : - Modified parameter detection to handle each
			     card differently depending on a switch-list
			   - 'card_ver' removed from the adapter list
			   - Some minor bug fixes
*/

#include <linux/mca.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>

#include <asm/io.h>
#include <asm/system.h>

#include "8390.h"

#define DRV_NAME "smc-mca"

static int ultramca_open(struct net_device *dev);
static void ultramca_reset_8390(struct net_device *dev);
static void ultramca_get_8390_hdr(struct net_device *dev,
                                  struct e8390_pkt_hdr *hdr,
                                  int ring_page);
static void ultramca_block_input(struct net_device *dev, int count,
                                 struct sk_buff *skb,
                                 int ring_offset);
static void ultramca_block_output(struct net_device *dev, int count,
                                  const unsigned char *buf,
                                  const int start_page);
static int ultramca_close_card(struct net_device *dev);

#define START_PG        0x00    /* First page of TX buffer */

#define ULTRA_CMDREG 0      /* Offset to ASIC command register. */
#define ULTRA_RESET  0x80   /* Board reset, in ULTRA_CMDREG. */
#define ULTRA_MEMENB 0x40   /* Enable the shared memory. */
#define ULTRA_NIC_OFFSET 16 /* NIC register offset from the base_addr. */
#define ULTRA_IO_EXTENT 32
#define EN0_ERWCNT      0x08  /* Early receive warning count. */

#define _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A            0
#define _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A            1
#define _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A              2
#define _6fc1_WD_Starcard_PLUS_A_WD8003ST_A                            3
#define _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A                        4
#define _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A        5
#define _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A        6
#define _efe5_IBM_PS2_Adapter_A_for_Ethernet                           7

struct smc_mca_adapters_t {
	unsigned int id;
	char *name;
};

#define MAX_ULTRAMCA_CARDS 4	/* Max number of Ultra cards per module */

static int ultra_io[MAX_ULTRAMCA_CARDS];
static int ultra_irq[MAX_ULTRAMCA_CARDS];
MODULE_LICENSE("GPL");

module_param_array(ultra_io, int, NULL, 0);
module_param_array(ultra_irq, int, NULL, 0);
MODULE_PARM_DESC(ultra_io, "SMC Ultra/EtherEZ MCA I/O base address(es)");
MODULE_PARM_DESC(ultra_irq, "SMC Ultra/EtherEZ MCA IRQ number(s)");

static const struct {
  unsigned int base_addr;
} addr_table[] = {
    { 0x0800 },
    { 0x1800 },
    { 0x2800 },
    { 0x3800 },
    { 0x4800 },
    { 0x5800 },
    { 0x6800 },
    { 0x7800 },
    { 0x8800 },
    { 0x9800 },
    { 0xa800 },
    { 0xb800 },
    { 0xc800 },
    { 0xd800 },
    { 0xe800 },
    { 0xf800 }
};

#define MEM_MASK 64

static const struct {
  unsigned char mem_index;
  unsigned long mem_start;
  unsigned char num_pages;
} mem_table[] = {
    { 16, 0x0c0000, 40 },
    { 18, 0x0c4000, 40 },
    { 20, 0x0c8000, 40 },
    { 22, 0x0cc000, 40 },
    { 24, 0x0d0000, 40 },
    { 26, 0x0d4000, 40 },
    { 28, 0x0d8000, 40 },
    { 30, 0x0dc000, 40 },
    {144, 0xfc0000, 40 },
    {148, 0xfc8000, 40 },
    {154, 0xfd0000, 40 },
    {156, 0xfd8000, 40 },
    {  0, 0x0c0000, 20 },
    {  1, 0x0c2000, 20 },
    {  2, 0x0c4000, 20 },
    {  3, 0x0c6000, 20 }
};

#define IRQ_MASK 243
static const struct {
   unsigned char new_irq;
   unsigned char old_irq;
} irq_table[] = {
   {  3,  3 },
   {  4,  4 },
   { 10, 10 },
   { 14, 15 }
};

static short smc_mca_adapter_ids[] __initdata = {
	0x61c8,
	0x61c9,
	0x6fc0,
	0x6fc1,
	0x6fc2,
	0xefd4,
	0xefd5,
	0xefe5,
	0x0000
};

static char *smc_mca_adapter_names[] __initdata = {
	"SMC Ethercard PLUS Elite/A BNC/AUI (WD8013EP/A)",
	"SMC Ethercard PLUS Elite/A UTP/AUI (WD8013WP/A)",
	"WD Ethercard PLUS/A (WD8003E/A or WD8003ET/A)",
	"WD Starcard PLUS/A (WD8003ST/A)",
	"WD Ethercard PLUS 10T/A (WD8003W/A)",
	"IBM PS/2 Adapter/A for Ethernet UTP/AUI (WD8013WP/A)",
	"IBM PS/2 Adapter/A for Ethernet BNC/AUI (WD8013EP/A)",
	"IBM PS/2 Adapter/A for Ethernet",
	NULL
};

static int ultra_found = 0;

static int __init ultramca_probe(struct device *gen_dev)
{
	unsigned short ioaddr;
	struct net_device *dev;
	unsigned char reg4, num_pages;
	struct mca_device *mca_dev = to_mca_device(gen_dev);
	char slot = mca_dev->slot;
	unsigned char pos2 = 0xff, pos3 = 0xff, pos4 = 0xff, pos5 = 0xff;
	int i, rc;
	int adapter = mca_dev->index;
	int tbase = 0;
	int tirq = 0;
	int base_addr = ultra_io[ultra_found];
	int irq = ultra_irq[ultra_found];
	DECLARE_MAC_BUF(mac);

	if (base_addr || irq) {
		printk(KERN_INFO "Probing for SMC MCA adapter");
		if (base_addr) {
			printk(KERN_INFO " at I/O address 0x%04x%c",
			       base_addr, irq ? ' ' : '\n');
		}
		if (irq) {
			printk(KERN_INFO "using irq %d\n", irq);
		}
	}

	tirq = 0;
	tbase = 0;

	/* If we're trying to match a specificied irq or io address,
	 * we'll reject the adapter found unless it's the one we're
	 * looking for */

	pos2 = mca_device_read_stored_pos(mca_dev, 2); /* io_addr */
	pos3 = mca_device_read_stored_pos(mca_dev, 3); /* shared mem */
	pos4 = mca_device_read_stored_pos(mca_dev, 4); /* ROM bios addr range */
	pos5 = mca_device_read_stored_pos(mca_dev, 5); /* irq, media and RIPL */

	/* Test the following conditions:
	 * - If an irq parameter is supplied, compare it
	 *   with the irq of the adapter we found
	 * - If a base_addr paramater is given, compare it
	 *   with the base_addr of the adapter we found
	 * - Check that the irq and the base_addr of the
	 *   adapter we found is not already in use by
	 *   this driver
	 */

	switch (mca_dev->index) {
	case _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A:
	case _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A:
	case _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A:
	case _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A:
		{
			tbase = addr_table[(pos2 & 0xf0) >> 4].base_addr;
			tirq  = irq_table[(pos5 & 0xc) >> 2].new_irq;
			break;
		}
	case _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A:
	case _6fc1_WD_Starcard_PLUS_A_WD8003ST_A:
	case _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A:
	case _efe5_IBM_PS2_Adapter_A_for_Ethernet:
		{
			tbase = ((pos2 & 0x0fe) * 0x10);
			tirq  = irq_table[(pos5 & 3)].old_irq;
			break;
		}
	}

	if(!tirq || !tbase
	   || (irq && irq != tirq)
	   || (base_addr && tbase != base_addr))
		/* FIXME: we're trying to force the ordering of the
		 * devices here, there should be a way of getting this
		 * to happen */
		return -ENXIO;

        /* Adapter found. */
	dev  = alloc_ei_netdev();
	if(!dev)
		return -ENODEV;

	SET_NETDEV_DEV(dev, gen_dev);
	mca_device_set_name(mca_dev, smc_mca_adapter_names[adapter]);
	mca_device_set_claim(mca_dev, 1);

	printk(KERN_INFO "smc_mca: %s found in slot %d\n",
		       smc_mca_adapter_names[adapter], slot + 1);

	ultra_found++;

	dev->base_addr = ioaddr = mca_device_transform_ioport(mca_dev, tbase);
	dev->irq       = mca_device_transform_irq(mca_dev, tirq);
	dev->mem_start = 0;
	num_pages      = 40;

	switch (adapter) {	/* card-# in const array above [hs] */
		case _61c8_SMC_Ethercard_PLUS_Elite_A_BNC_AUI_WD8013EP_A:
		case _61c9_SMC_Ethercard_PLUS_Elite_A_UTP_AUI_WD8013EP_A:
		{
			for (i = 0; i < 16; i++) { /* taking 16 counts
						    * up to 15 [hs] */
				if (mem_table[i].mem_index == (pos3 & ~MEM_MASK)) {
					dev->mem_start = (unsigned long)
					  mca_device_transform_memory(mca_dev, (void *)mem_table[i].mem_start);
					num_pages = mem_table[i].num_pages;
				}
			}
			break;
		}
		case _6fc0_WD_Ethercard_PLUS_A_WD8003E_A_OR_WD8003ET_A:
		case _6fc1_WD_Starcard_PLUS_A_WD8003ST_A:
		case _6fc2_WD_Ethercard_PLUS_10T_A_WD8003W_A:
		case _efe5_IBM_PS2_Adapter_A_for_Ethernet:
		{
			dev->mem_start = (unsigned long)
			  mca_device_transform_memory(mca_dev, (void *)((pos3 & 0xfc) * 0x1000));
			num_pages = 0x40;
			break;
		}
		case _efd4_IBM_PS2_Adapter_A_for_Ethernet_UTP_AUI_WD8013WP_A:
		case _efd5_IBM_PS2_Adapter_A_for_Ethernet_BNC_AUI_WD8013WP_A:
		{
			/* courtesy of gamera@quartz.ocn.ne.jp, pos3 indicates
			 * the index of the 0x2000 step.
			 * beware different number of pages [hs]
			 */
			dev->mem_start = (unsigned long)
			  mca_device_transform_memory(mca_dev, (void *)(0xc0000 + (0x2000 * (pos3 & 0xf))));
			num_pages = 0x20 + (2 * (pos3 & 0x10));
			break;
		}
	}

	/* sanity check, shouldn't happen */
	if (dev->mem_start == 0) {
		rc = -ENODEV;
		goto err_unclaim;
	}

	if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) {
		rc = -ENODEV;
		goto err_unclaim;
	}

	reg4 = inb(ioaddr + 4) & 0x7f;
	outb(reg4, ioaddr + 4);

	for (i = 0; i < 6; i++)
		dev->dev_addr[i] = inb(ioaddr + 8 + i);

	printk(KERN_INFO "smc_mca[%d]: Parameters: %#3x, %s",
	       slot + 1, ioaddr, print_mac(mac, dev->dev_addr));

	/* Switch from the station address to the alternate register set
	 * and read the useful registers there.
	 */

	outb(0x80 | reg4, ioaddr + 4);

	/* Enable FINE16 mode to avoid BIOS ROM width mismatches @ reboot.
	 */

	outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c);

	/* Switch back to the station address register set so that
	 * the MS-DOS driver can find the card after a warm boot.
	 */

	outb(reg4, ioaddr + 4);

	gen_dev->driver_data = dev;

	/* The 8390 isn't at the base address, so fake the offset
	 */

	dev->base_addr = ioaddr + ULTRA_NIC_OFFSET;

	ei_status.name = "SMC Ultra MCA";
	ei_status.word16 = 1;
	ei_status.tx_start_page = START_PG;
	ei_status.rx_start_page = START_PG + TX_PAGES;
	ei_status.stop_page = num_pages;

	ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG) * 256);
	if (!ei_status.mem) {
		rc = -ENOMEM;
		goto err_release_region;
	}

	dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG) * 256;

	printk(", IRQ %d memory %#lx-%#lx.\n",
	dev->irq, dev->mem_start, dev->mem_end - 1);

	ei_status.reset_8390 = &ultramca_reset_8390;
	ei_status.block_input = &ultramca_block_input;
	ei_status.block_output = &ultramca_block_output;
	ei_status.get_8390_hdr = &ultramca_get_8390_hdr;

	ei_status.priv = slot;

	dev->open = &ultramca_open;
	dev->stop = &ultramca_close_card;
#ifdef CONFIG_NET_POLL_CONTROLLER
	dev->poll_controller = ei_poll;
#endif

	NS8390_init(dev, 0);

	rc = register_netdev(dev);
	if (rc)
		goto err_unmap;

	return 0;

err_unmap:
	iounmap(ei_status.mem);
err_release_region:
	release_region(ioaddr, ULTRA_IO_EXTENT);
err_unclaim:
	mca_device_set_claim(mca_dev, 0);
	free_netdev(dev);
	return rc;
}

static int ultramca_open(struct net_device *dev)
{
	int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
	int retval;

	if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)))
		return retval;

	outb(ULTRA_MEMENB, ioaddr); /* Enable memory */
	outb(0x80, ioaddr + 5);     /* ??? */
	outb(0x01, ioaddr + 6);     /* Enable interrupts and memory. */
	outb(0x04, ioaddr + 5);     /* ??? */

	/* Set the early receive warning level in window 0 high enough not
	 * to receive ERW interrupts.
	 */

	/* outb_p(E8390_NODMA + E8390_PAGE0, dev->base_addr);
	 * outb(0xff, dev->base_addr + EN0_ERWCNT);
	 */

	ei_open(dev);
	return 0;
}

static void ultramca_reset_8390(struct net_device *dev)
{
	int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */

	outb(ULTRA_RESET, ioaddr);
	if (ei_debug > 1)
		printk("resetting Ultra, t=%ld...", jiffies);
	ei_status.txing = 0;

	outb(0x80, ioaddr + 5);     /* ??? */
	outb(0x01, ioaddr + 6);     /* Enable interrupts and memory. */

	if (ei_debug > 1)
		printk("reset done\n");
	return;
}

/* Grab the 8390 specific header. Similar to the block_input routine, but
 * we don't need to be concerned with ring wrap as the header will be at
 * the start of a page, so we optimize accordingly.
 */

static void ultramca_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
{
	void __iomem *hdr_start = ei_status.mem + ((ring_page - START_PG) << 8);

#ifdef notdef
	/* Officially this is what we are doing, but the readl() is faster */
	memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
#else
	((unsigned int*)hdr)[0] = readl(hdr_start);
#endif
}

/* Block input and output are easy on shared memory ethercards, the only
 * complication is when the ring buffer wraps.
 */

static void ultramca_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
{
	void __iomem *xfer_start = ei_status.mem + ring_offset - START_PG * 256;

	if (ring_offset + count > ei_status.stop_page * 256) {
		/* We must wrap the input move. */
		int semi_count = ei_status.stop_page * 256 - ring_offset;
		memcpy_fromio(skb->data, xfer_start, semi_count);
		count -= semi_count;
		memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
	} else {
		memcpy_fromio(skb->data, xfer_start, count);
	}

}

static void ultramca_block_output(struct net_device *dev, int count, const unsigned char *buf,
                int start_page)
{
	void __iomem *shmem = ei_status.mem + ((start_page - START_PG) << 8);

	memcpy_toio(shmem, buf, count);
}

static int ultramca_close_card(struct net_device *dev)
{
	int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */

	netif_stop_queue(dev);

	if (ei_debug > 1)
		printk("%s: Shutting down ethercard.\n", dev->name);

	outb(0x00, ioaddr + 6);     /* Disable interrupts. */
	free_irq(dev->irq, dev);

	NS8390_init(dev, 0);
	/* We should someday disable shared memory and change to 8-bit mode
         * "just in case"...
	 */

	return 0;
}

static int ultramca_remove(struct device *gen_dev)
{
	struct mca_device *mca_dev = to_mca_device(gen_dev);
	struct net_device *dev = (struct net_device *)gen_dev->driver_data;

	if (dev) {
		/* NB: ultra_close_card() does free_irq */
		int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET;

		unregister_netdev(dev);
		mca_device_set_claim(mca_dev, 0);
		release_region(ioaddr, ULTRA_IO_EXTENT);
		iounmap(ei_status.mem);
		free_netdev(dev);
	}
	return 0;
}


static struct mca_driver ultra_driver = {
	.id_table = smc_mca_adapter_ids,
	.driver = {
		.name = "smc-mca",
		.bus = &mca_bus_type,
		.probe = ultramca_probe,
		.remove = ultramca_remove,
	}
};

static int __init ultramca_init_module(void)
{
	if(!MCA_bus)
		return -ENXIO;

	mca_register_driver(&ultra_driver);

	return ultra_found ? 0 : -ENXIO;
}

static void __exit ultramca_cleanup_module(void)
{
	mca_unregister_driver(&ultra_driver);
}
module_init(ultramca_init_module);
module_exit(ultramca_cleanup_module);