blob: 11ff1d5fb8f0dfe6a1c691421c003c07f4ddef1e [file] [log] [blame]
Eric Moore635374e2009-03-09 01:21:12 -06001/*
2 * Management Module Support for MPT (Message Passing Technology) based
3 * controllers
4 *
5 * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
Kashyap, Desai31b7f2e2010-03-17 16:28:04 +05306 * Copyright (C) 2007-2010 LSI Corporation
Eric Moore635374e2009-03-09 01:21:12 -06007 * (mailto:DL-MPTFusionLinux@lsi.com)
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * NO WARRANTY
20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
24 * solely responsible for determining the appropriateness of using and
25 * distributing the Program and assumes all risks associated with its
26 * exercise of rights under this Agreement, including but not limited to
27 * the risks and costs of program errors, damage to or loss of data,
28 * programs or equipment, and unavailability or interruption of operations.
29
30 * DISCLAIMER OF LIABILITY
31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
38
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
42 * USA.
43 */
44
45#ifndef MPT2SAS_CTL_H_INCLUDED
46#define MPT2SAS_CTL_H_INCLUDED
47
48#ifdef __KERNEL__
49#include <linux/miscdevice.h>
50#endif
51
52#define MPT2SAS_DEV_NAME "mpt2ctl"
Eric Moorefd018252009-04-21 15:37:20 -060053#define MPT2_MAGIC_NUMBER 'L'
Eric Moore635374e2009-03-09 01:21:12 -060054#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
55
56/**
57 * IOCTL opcodes
58 */
59#define MPT2IOCINFO _IOWR(MPT2_MAGIC_NUMBER, 17, \
60 struct mpt2_ioctl_iocinfo)
61#define MPT2COMMAND _IOWR(MPT2_MAGIC_NUMBER, 20, \
62 struct mpt2_ioctl_command)
63#ifdef CONFIG_COMPAT
64#define MPT2COMMAND32 _IOWR(MPT2_MAGIC_NUMBER, 20, \
65 struct mpt2_ioctl_command32)
66#endif
67#define MPT2EVENTQUERY _IOWR(MPT2_MAGIC_NUMBER, 21, \
68 struct mpt2_ioctl_eventquery)
69#define MPT2EVENTENABLE _IOWR(MPT2_MAGIC_NUMBER, 22, \
70 struct mpt2_ioctl_eventenable)
71#define MPT2EVENTREPORT _IOWR(MPT2_MAGIC_NUMBER, 23, \
72 struct mpt2_ioctl_eventreport)
73#define MPT2HARDRESET _IOWR(MPT2_MAGIC_NUMBER, 24, \
74 struct mpt2_ioctl_diag_reset)
75#define MPT2BTDHMAPPING _IOWR(MPT2_MAGIC_NUMBER, 31, \
76 struct mpt2_ioctl_btdh_mapping)
77
78/* diag buffer support */
79#define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \
80 struct mpt2_diag_register)
81#define MPT2DIAGRELEASE _IOWR(MPT2_MAGIC_NUMBER, 27, \
82 struct mpt2_diag_release)
83#define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \
84 struct mpt2_diag_unregister)
85#define MPT2DIAGQUERY _IOWR(MPT2_MAGIC_NUMBER, 29, \
86 struct mpt2_diag_query)
87#define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \
88 struct mpt2_diag_read_buffer)
89
90/**
91 * struct mpt2_ioctl_header - main header structure
92 * @ioc_number - IOC unit number
93 * @port_number - IOC port number
94 * @max_data_size - maximum number bytes to transfer on read
95 */
96struct mpt2_ioctl_header {
97 uint32_t ioc_number;
98 uint32_t port_number;
99 uint32_t max_data_size;
100};
101
102/**
103 * struct mpt2_ioctl_diag_reset - diagnostic reset
104 * @hdr - generic header
105 */
106struct mpt2_ioctl_diag_reset {
107 struct mpt2_ioctl_header hdr;
108};
109
110
111/**
112 * struct mpt2_ioctl_pci_info - pci device info
113 * @device - pci device id
114 * @function - pci function id
115 * @bus - pci bus id
116 * @segment_id - pci segment id
117 */
118struct mpt2_ioctl_pci_info {
119 union {
120 struct {
121 uint32_t device:5;
122 uint32_t function:3;
123 uint32_t bus:24;
124 } bits;
125 uint32_t word;
126 } u;
127 uint32_t segment_id;
128};
129
130
131#define MPT2_IOCTL_INTERFACE_SCSI (0x00)
132#define MPT2_IOCTL_INTERFACE_FC (0x01)
133#define MPT2_IOCTL_INTERFACE_FC_IP (0x02)
134#define MPT2_IOCTL_INTERFACE_SAS (0x03)
135#define MPT2_IOCTL_INTERFACE_SAS2 (0x04)
Kashyap, Desai0bdccdb2011-04-07 12:32:49 +0530136#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200 (0x05)
Eric Moore635374e2009-03-09 01:21:12 -0600137#define MPT2_IOCTL_VERSION_LENGTH (32)
138
139/**
140 * struct mpt2_ioctl_iocinfo - generic controller info
141 * @hdr - generic header
142 * @adapter_type - type of adapter (spi, fc, sas)
143 * @port_number - port number
144 * @pci_id - PCI Id
145 * @hw_rev - hardware revision
146 * @sub_system_device - PCI subsystem Device ID
147 * @sub_system_vendor - PCI subsystem Vendor ID
148 * @rsvd0 - reserved
149 * @firmware_version - firmware version
150 * @bios_version - BIOS version
151 * @driver_version - driver version - 32 ASCII characters
152 * @rsvd1 - reserved
153 * @scsi_id - scsi id of adapter 0
154 * @rsvd2 - reserved
155 * @pci_information - pci info (2nd revision)
156 */
157struct mpt2_ioctl_iocinfo {
158 struct mpt2_ioctl_header hdr;
159 uint32_t adapter_type;
160 uint32_t port_number;
161 uint32_t pci_id;
162 uint32_t hw_rev;
163 uint32_t subsystem_device;
164 uint32_t subsystem_vendor;
165 uint32_t rsvd0;
166 uint32_t firmware_version;
167 uint32_t bios_version;
168 uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
169 uint8_t rsvd1;
170 uint8_t scsi_id;
171 uint16_t rsvd2;
172 struct mpt2_ioctl_pci_info pci_information;
173};
174
175
176/* number of event log entries */
177#define MPT2SAS_CTL_EVENT_LOG_SIZE (50)
178
179/**
180 * struct mpt2_ioctl_eventquery - query event count and type
181 * @hdr - generic header
182 * @event_entries - number of events returned by get_event_report
183 * @rsvd - reserved
184 * @event_types - type of events currently being captured
185 */
186struct mpt2_ioctl_eventquery {
187 struct mpt2_ioctl_header hdr;
188 uint16_t event_entries;
189 uint16_t rsvd;
190 uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
191};
192
193/**
194 * struct mpt2_ioctl_eventenable - enable/disable event capturing
195 * @hdr - generic header
196 * @event_types - toggle off/on type of events to be captured
197 */
198struct mpt2_ioctl_eventenable {
199 struct mpt2_ioctl_header hdr;
200 uint32_t event_types[4];
201};
202
203#define MPT2_EVENT_DATA_SIZE (192)
204/**
205 * struct MPT2_IOCTL_EVENTS -
206 * @event - the event that was reported
207 * @context - unique value for each event assigned by driver
208 * @data - event data returned in fw reply message
209 */
210struct MPT2_IOCTL_EVENTS {
211 uint32_t event;
212 uint32_t context;
213 uint8_t data[MPT2_EVENT_DATA_SIZE];
214};
215
216/**
217 * struct mpt2_ioctl_eventreport - returing event log
218 * @hdr - generic header
219 * @event_data - (see struct MPT2_IOCTL_EVENTS)
220 */
221struct mpt2_ioctl_eventreport {
222 struct mpt2_ioctl_header hdr;
223 struct MPT2_IOCTL_EVENTS event_data[1];
224};
225
226/**
227 * struct mpt2_ioctl_command - generic mpt firmware passthru ioclt
228 * @hdr - generic header
229 * @timeout - command timeout in seconds. (if zero then use driver default
230 * value).
231 * @reply_frame_buf_ptr - reply location
232 * @data_in_buf_ptr - destination for read
233 * @data_out_buf_ptr - data source for write
234 * @sense_data_ptr - sense data location
235 * @max_reply_bytes - maximum number of reply bytes to be sent to app.
236 * @data_in_size - number bytes for data transfer in (read)
237 * @data_out_size - number bytes for data transfer out (write)
238 * @max_sense_bytes - maximum number of bytes for auto sense buffers
239 * @data_sge_offset - offset in words from the start of the request message to
240 * the first SGL
241 * @mf[1];
242 */
243struct mpt2_ioctl_command {
244 struct mpt2_ioctl_header hdr;
245 uint32_t timeout;
246 void __user *reply_frame_buf_ptr;
247 void __user *data_in_buf_ptr;
248 void __user *data_out_buf_ptr;
249 void __user *sense_data_ptr;
250 uint32_t max_reply_bytes;
251 uint32_t data_in_size;
252 uint32_t data_out_size;
253 uint32_t max_sense_bytes;
254 uint32_t data_sge_offset;
255 uint8_t mf[1];
256};
257
258#ifdef CONFIG_COMPAT
259struct mpt2_ioctl_command32 {
260 struct mpt2_ioctl_header hdr;
261 uint32_t timeout;
262 uint32_t reply_frame_buf_ptr;
263 uint32_t data_in_buf_ptr;
264 uint32_t data_out_buf_ptr;
265 uint32_t sense_data_ptr;
266 uint32_t max_reply_bytes;
267 uint32_t data_in_size;
268 uint32_t data_out_size;
269 uint32_t max_sense_bytes;
270 uint32_t data_sge_offset;
271 uint8_t mf[1];
272};
273#endif
274
275/**
276 * struct mpt2_ioctl_btdh_mapping - mapping info
277 * @hdr - generic header
278 * @id - target device identification number
279 * @bus - SCSI bus number that the target device exists on
280 * @handle - device handle for the target device
281 * @rsvd - reserved
282 *
283 * To obtain a bus/id the application sets
284 * handle to valid handle, and bus/id to 0xFFFF.
285 *
286 * To obtain the device handle the application sets
287 * bus/id valid value, and the handle to 0xFFFF.
288 */
289struct mpt2_ioctl_btdh_mapping {
290 struct mpt2_ioctl_header hdr;
291 uint32_t id;
292 uint32_t bus;
293 uint16_t handle;
294 uint16_t rsvd;
295};
296
297
298/* status bits for ioc->diag_buffer_status */
Eric Moore99bb2142009-04-21 15:42:13 -0600299#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
300#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
301#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04)
Eric Moore635374e2009-03-09 01:21:12 -0600302
303/* application flags for mpt2_diag_register, mpt2_diag_query */
304#define MPT2_APP_FLAGS_APP_OWNED (0x0001)
305#define MPT2_APP_FLAGS_BUFFER_VALID (0x0002)
306#define MPT2_APP_FLAGS_FW_BUFFER_ACCESS (0x0004)
307
308/* flags for mpt2_diag_read_buffer */
309#define MPT2_FLAGS_REREGISTER (0x0001)
310
311#define MPT2_PRODUCT_SPECIFIC_DWORDS 23
312
313/**
314 * struct mpt2_diag_register - application register with driver
315 * @hdr - generic header
316 * @reserved -
Kashyap, Desai1b01fe32009-09-23 17:28:59 +0530317 * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
Eric Moore635374e2009-03-09 01:21:12 -0600318 * @application_flags - misc flags
319 * @diagnostic_flags - specifies flags affecting command processing
320 * @product_specific - product specific information
321 * @requested_buffer_size - buffers size in bytes
322 * @unique_id - tag specified by application that is used to signal ownership
323 * of the buffer.
324 *
325 * This will allow the driver to setup any required buffers that will be
326 * needed by firmware to communicate with the driver.
327 */
328struct mpt2_diag_register {
329 struct mpt2_ioctl_header hdr;
330 uint8_t reserved;
331 uint8_t buffer_type;
332 uint16_t application_flags;
333 uint32_t diagnostic_flags;
334 uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
335 uint32_t requested_buffer_size;
336 uint32_t unique_id;
337};
338
339/**
340 * struct mpt2_diag_unregister - application unregister with driver
341 * @hdr - generic header
342 * @unique_id - tag uniquely identifies the buffer to be unregistered
343 *
344 * This will allow the driver to cleanup any memory allocated for diag
345 * messages and to free up any resources.
346 */
347struct mpt2_diag_unregister {
348 struct mpt2_ioctl_header hdr;
349 uint32_t unique_id;
350};
351
352/**
353 * struct mpt2_diag_query - query relevant info associated with diag buffers
354 * @hdr - generic header
355 * @reserved -
Kashyap, Desai1b01fe32009-09-23 17:28:59 +0530356 * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
Eric Moore635374e2009-03-09 01:21:12 -0600357 * @application_flags - misc flags
358 * @diagnostic_flags - specifies flags affecting command processing
359 * @product_specific - product specific information
360 * @total_buffer_size - diag buffer size in bytes
361 * @driver_added_buffer_size - size of extra space appended to end of buffer
362 * @unique_id - unique id associated with this buffer.
363 *
364 * The application will send only buffer_type and unique_id. Driver will
365 * inspect unique_id first, if valid, fill in all the info. If unique_id is
366 * 0x00, the driver will return info specified by Buffer Type.
367 */
368struct mpt2_diag_query {
369 struct mpt2_ioctl_header hdr;
370 uint8_t reserved;
371 uint8_t buffer_type;
372 uint16_t application_flags;
373 uint32_t diagnostic_flags;
374 uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
375 uint32_t total_buffer_size;
376 uint32_t driver_added_buffer_size;
377 uint32_t unique_id;
378};
379
380/**
381 * struct mpt2_diag_release - request to send Diag Release Message to firmware
382 * @hdr - generic header
383 * @unique_id - tag uniquely identifies the buffer to be released
384 *
385 * This allows ownership of the specified buffer to returned to the driver,
386 * allowing an application to read the buffer without fear that firmware is
387 * overwritting information in the buffer.
388 */
389struct mpt2_diag_release {
390 struct mpt2_ioctl_header hdr;
391 uint32_t unique_id;
392};
393
394/**
395 * struct mpt2_diag_read_buffer - request for copy of the diag buffer
396 * @hdr - generic header
397 * @status -
398 * @reserved -
399 * @flags - misc flags
400 * @starting_offset - starting offset within drivers buffer where to start
401 * reading data at into the specified application buffer
402 * @bytes_to_read - number of bytes to copy from the drivers buffer into the
403 * application buffer starting at starting_offset.
404 * @unique_id - unique id associated with this buffer.
405 * @diagnostic_data - data payload
406 */
407struct mpt2_diag_read_buffer {
408 struct mpt2_ioctl_header hdr;
409 uint8_t status;
410 uint8_t reserved;
411 uint16_t flags;
412 uint32_t starting_offset;
413 uint32_t bytes_to_read;
414 uint32_t unique_id;
415 uint32_t diagnostic_data[1];
416};
417
418#endif /* MPT2SAS_CTL_H_INCLUDED */