Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2008 Intel Corporation |
| 3 | * Authors: |
| 4 | * Andy Henroid <andrew.d.henroid@intel.com> |
| 5 | * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> |
| 6 | */ |
| 7 | |
| 8 | /* |
| 9 | * Save DIMM power on Intel 7300-based platforms when all CPUs/cores |
| 10 | * are idle, using the DIMM thermal throttling capability. |
| 11 | * |
| 12 | * This driver depends on the Intel integrated DMA controller (I/O AT). |
| 13 | * If the driver for I/O AT (drivers/dma/ioatdma*) is also enabled, |
| 14 | * this driver should work cooperatively. |
| 15 | */ |
| 16 | |
| 17 | /* #define DEBUG */ |
| 18 | |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/pci.h> |
| 21 | #include <linux/sched.h> |
| 22 | #include <linux/notifier.h> |
| 23 | #include <linux/cpumask.h> |
| 24 | #include <linux/ktime.h> |
| 25 | #include <linux/delay.h> |
| 26 | #include <linux/debugfs.h> |
| 27 | #include <linux/stop_machine.h> |
Venki Pallipadi | 3ad0b02 | 2008-10-22 16:34:52 -0700 | [diff] [blame] | 28 | #include <linux/i7300_idle.h> |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 29 | |
| 30 | #include <asm/idle.h> |
| 31 | |
Dan Williams | 584ec22 | 2009-07-28 14:32:12 -0700 | [diff] [blame] | 32 | #include "../dma/ioat/hw.h" |
| 33 | #include "../dma/ioat/registers.h" |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 34 | |
| 35 | #define I7300_IDLE_DRIVER_VERSION "1.55" |
| 36 | #define I7300_PRINT "i7300_idle:" |
| 37 | |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 38 | #define MAX_STOP_RETRIES 10 |
| 39 | |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 40 | static int debug; |
| 41 | module_param_named(debug, debug, uint, 0644); |
| 42 | MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); |
| 43 | |
Len Brown | 2f10260 | 2009-05-27 23:59:58 -0400 | [diff] [blame] | 44 | static int forceload; |
| 45 | module_param_named(forceload, forceload, uint, 0644); |
| 46 | MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000"); |
| 47 | |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 48 | #define dprintk(fmt, arg...) \ |
| 49 | do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0) |
| 50 | |
| 51 | /* |
| 52 | * Value to set THRTLOW to when initiating throttling |
| 53 | * 0 = No throttling |
| 54 | * 1 = Throttle when > 4 activations per eval window (Maximum throttling) |
| 55 | * 2 = Throttle when > 8 activations |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 56 | * 168 = Throttle when > 672 activations (Minimum throttling) |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 57 | */ |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 58 | #define MAX_THROTTLE_LOW_LIMIT 168 |
| 59 | static uint throttle_low_limit = 1; |
| 60 | module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644); |
| 61 | MODULE_PARM_DESC(throttle_low_limit, |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 62 | "Value for THRTLOWLM activation field " |
| 63 | "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)"); |
| 64 | |
| 65 | /* |
| 66 | * simple invocation and duration statistics |
| 67 | */ |
| 68 | static unsigned long total_starts; |
| 69 | static unsigned long total_us; |
| 70 | |
| 71 | #ifdef DEBUG |
| 72 | static unsigned long past_skip; |
| 73 | #endif |
| 74 | |
| 75 | static struct pci_dev *fbd_dev; |
| 76 | |
| 77 | static spinlock_t i7300_idle_lock; |
| 78 | static int i7300_idle_active; |
| 79 | |
| 80 | static u8 i7300_idle_thrtctl_saved; |
| 81 | static u8 i7300_idle_thrtlow_saved; |
| 82 | static u32 i7300_idle_mc_saved; |
| 83 | |
| 84 | static cpumask_t idle_cpumask; |
| 85 | static ktime_t start_ktime; |
| 86 | static unsigned long avg_idle_us; |
| 87 | |
| 88 | static struct dentry *debugfs_dir; |
| 89 | |
| 90 | /* Begin: I/O AT Helper routines */ |
| 91 | |
| 92 | #define IOAT_CHANBASE(ioat_ctl, chan) (ioat_ctl + 0x80 + 0x80 * chan) |
| 93 | /* Snoop control (disable snoops when coherency is not important) */ |
| 94 | #define IOAT_DESC_SADDR_SNP_CTL (1UL << 1) |
| 95 | #define IOAT_DESC_DADDR_SNP_CTL (1UL << 2) |
| 96 | |
| 97 | static struct pci_dev *ioat_dev; |
| 98 | static struct ioat_dma_descriptor *ioat_desc; /* I/O AT desc & data (1 page) */ |
| 99 | static unsigned long ioat_desc_phys; |
| 100 | static u8 *ioat_iomap; /* I/O AT memory-mapped control regs (aka CB_BAR) */ |
| 101 | static u8 *ioat_chanbase; |
| 102 | |
| 103 | /* Start I/O AT memory copy */ |
| 104 | static int i7300_idle_ioat_start(void) |
| 105 | { |
| 106 | u32 err; |
| 107 | /* Clear error (due to circular descriptor pointer) */ |
| 108 | err = readl(ioat_chanbase + IOAT_CHANERR_OFFSET); |
| 109 | if (err) |
| 110 | writel(err, ioat_chanbase + IOAT_CHANERR_OFFSET); |
| 111 | |
| 112 | writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| 113 | return 0; |
| 114 | } |
| 115 | |
| 116 | /* Stop I/O AT memory copy */ |
| 117 | static void i7300_idle_ioat_stop(void) |
| 118 | { |
| 119 | int i; |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 120 | u64 sts; |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 121 | |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 122 | for (i = 0; i < MAX_STOP_RETRIES; i++) { |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 123 | writeb(IOAT_CHANCMD_RESET, |
| 124 | ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| 125 | |
| 126 | udelay(10); |
| 127 | |
| 128 | sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) & |
Dan Williams | 09c8a5b | 2009-09-08 12:01:49 -0700 | [diff] [blame^] | 129 | IOAT_CHANSTS_STATUS; |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 130 | |
Dan Williams | 09c8a5b | 2009-09-08 12:01:49 -0700 | [diff] [blame^] | 131 | if (sts != IOAT_CHANSTS_ACTIVE) |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 132 | break; |
| 133 | |
| 134 | } |
| 135 | |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 136 | if (i == MAX_STOP_RETRIES) { |
| 137 | dprintk("failed to stop I/O AT after %d retries\n", |
| 138 | MAX_STOP_RETRIES); |
| 139 | } |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 140 | } |
| 141 | |
| 142 | /* Test I/O AT by copying 1024 byte from 2k to 1k */ |
| 143 | static int __init i7300_idle_ioat_selftest(u8 *ctl, |
| 144 | struct ioat_dma_descriptor *desc, unsigned long desc_phys) |
| 145 | { |
| 146 | u64 chan_sts; |
| 147 | |
| 148 | memset(desc, 0, 2048); |
| 149 | memset((u8 *) desc + 2048, 0xab, 1024); |
| 150 | |
| 151 | desc[0].size = 1024; |
| 152 | desc[0].ctl = 0; |
| 153 | desc[0].src_addr = desc_phys + 2048; |
| 154 | desc[0].dst_addr = desc_phys + 1024; |
| 155 | desc[0].next = 0; |
| 156 | |
| 157 | writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| 158 | writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| 159 | |
| 160 | udelay(1000); |
| 161 | |
| 162 | chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) & |
Dan Williams | 09c8a5b | 2009-09-08 12:01:49 -0700 | [diff] [blame^] | 163 | IOAT_CHANSTS_STATUS; |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 164 | |
Dan Williams | 09c8a5b | 2009-09-08 12:01:49 -0700 | [diff] [blame^] | 165 | if (chan_sts != IOAT_CHANSTS_DONE) { |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 166 | /* Not complete, reset the channel */ |
| 167 | writeb(IOAT_CHANCMD_RESET, |
| 168 | ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| 169 | return -1; |
| 170 | } |
| 171 | |
| 172 | if (*(u32 *) ((u8 *) desc + 3068) != 0xabababab || |
| 173 | *(u32 *) ((u8 *) desc + 2044) != 0xabababab) { |
| 174 | dprintk("Data values src 0x%x, dest 0x%x, memset 0x%x\n", |
| 175 | *(u32 *) ((u8 *) desc + 2048), |
| 176 | *(u32 *) ((u8 *) desc + 1024), |
| 177 | *(u32 *) ((u8 *) desc + 3072)); |
| 178 | return -1; |
| 179 | } |
| 180 | return 0; |
| 181 | } |
| 182 | |
| 183 | static struct device dummy_dma_dev = { |
Kay Sievers | 24f81a7 | 2009-01-06 10:44:39 -0800 | [diff] [blame] | 184 | .init_name = "fallback device", |
Yang Hongyang | 6a35528 | 2009-04-06 19:01:13 -0700 | [diff] [blame] | 185 | .coherent_dma_mask = DMA_BIT_MASK(64), |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 186 | .dma_mask = &dummy_dma_dev.coherent_dma_mask, |
| 187 | }; |
| 188 | |
| 189 | /* Setup and initialize I/O AT */ |
| 190 | /* This driver needs I/O AT as the throttling takes effect only when there is |
| 191 | * some memory activity. We use I/O AT to set up a dummy copy, while all CPUs |
| 192 | * go idle and memory is throttled. |
| 193 | */ |
| 194 | static int __init i7300_idle_ioat_init(void) |
| 195 | { |
| 196 | u8 ver, chan_count, ioat_chan; |
| 197 | u16 chan_ctl; |
| 198 | |
| 199 | ioat_iomap = (u8 *) ioremap_nocache(pci_resource_start(ioat_dev, 0), |
| 200 | pci_resource_len(ioat_dev, 0)); |
| 201 | |
| 202 | if (!ioat_iomap) { |
| 203 | printk(KERN_ERR I7300_PRINT "failed to map I/O AT registers\n"); |
| 204 | goto err_ret; |
| 205 | } |
| 206 | |
| 207 | ver = readb(ioat_iomap + IOAT_VER_OFFSET); |
| 208 | if (ver != IOAT_VER_1_2) { |
| 209 | printk(KERN_ERR I7300_PRINT "unknown I/O AT version (%u.%u)\n", |
| 210 | ver >> 4, ver & 0xf); |
| 211 | goto err_unmap; |
| 212 | } |
| 213 | |
| 214 | chan_count = readb(ioat_iomap + IOAT_CHANCNT_OFFSET); |
| 215 | if (!chan_count) { |
| 216 | printk(KERN_ERR I7300_PRINT "unexpected # of I/O AT channels " |
| 217 | "(%u)\n", |
| 218 | chan_count); |
| 219 | goto err_unmap; |
| 220 | } |
| 221 | |
| 222 | ioat_chan = chan_count - 1; |
| 223 | ioat_chanbase = IOAT_CHANBASE(ioat_iomap, ioat_chan); |
| 224 | |
| 225 | chan_ctl = readw(ioat_chanbase + IOAT_CHANCTRL_OFFSET); |
| 226 | if (chan_ctl & IOAT_CHANCTRL_CHANNEL_IN_USE) { |
| 227 | printk(KERN_ERR I7300_PRINT "channel %d in use\n", ioat_chan); |
| 228 | goto err_unmap; |
| 229 | } |
| 230 | |
| 231 | writew(IOAT_CHANCTRL_CHANNEL_IN_USE, |
| 232 | ioat_chanbase + IOAT_CHANCTRL_OFFSET); |
| 233 | |
| 234 | ioat_desc = (struct ioat_dma_descriptor *)dma_alloc_coherent( |
| 235 | &dummy_dma_dev, 4096, |
| 236 | (dma_addr_t *)&ioat_desc_phys, GFP_KERNEL); |
| 237 | if (!ioat_desc) { |
| 238 | printk(KERN_ERR I7300_PRINT "failed to allocate I/O AT desc\n"); |
| 239 | goto err_mark_unused; |
| 240 | } |
| 241 | |
| 242 | writel(ioat_desc_phys & 0xffffffffUL, |
| 243 | ioat_chanbase + IOAT1_CHAINADDR_OFFSET_LOW); |
| 244 | writel(ioat_desc_phys >> 32, |
| 245 | ioat_chanbase + IOAT1_CHAINADDR_OFFSET_HIGH); |
| 246 | |
| 247 | if (i7300_idle_ioat_selftest(ioat_iomap, ioat_desc, ioat_desc_phys)) { |
| 248 | printk(KERN_ERR I7300_PRINT "I/O AT self-test failed\n"); |
| 249 | goto err_free; |
| 250 | } |
| 251 | |
| 252 | /* Setup circular I/O AT descriptor chain */ |
| 253 | ioat_desc[0].ctl = IOAT_DESC_SADDR_SNP_CTL | IOAT_DESC_DADDR_SNP_CTL; |
| 254 | ioat_desc[0].src_addr = ioat_desc_phys + 2048; |
| 255 | ioat_desc[0].dst_addr = ioat_desc_phys + 3072; |
| 256 | ioat_desc[0].size = 128; |
| 257 | ioat_desc[0].next = ioat_desc_phys + sizeof(struct ioat_dma_descriptor); |
| 258 | |
| 259 | ioat_desc[1].ctl = ioat_desc[0].ctl; |
| 260 | ioat_desc[1].src_addr = ioat_desc[0].src_addr; |
| 261 | ioat_desc[1].dst_addr = ioat_desc[0].dst_addr; |
| 262 | ioat_desc[1].size = ioat_desc[0].size; |
| 263 | ioat_desc[1].next = ioat_desc_phys; |
| 264 | |
| 265 | return 0; |
| 266 | |
| 267 | err_free: |
| 268 | dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0); |
| 269 | err_mark_unused: |
| 270 | writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET); |
| 271 | err_unmap: |
| 272 | iounmap(ioat_iomap); |
| 273 | err_ret: |
| 274 | return -ENODEV; |
| 275 | } |
| 276 | |
| 277 | /* Cleanup I/O AT */ |
| 278 | static void __exit i7300_idle_ioat_exit(void) |
| 279 | { |
| 280 | int i; |
| 281 | u64 chan_sts; |
| 282 | |
| 283 | i7300_idle_ioat_stop(); |
| 284 | |
| 285 | /* Wait for a while for the channel to halt before releasing */ |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 286 | for (i = 0; i < MAX_STOP_RETRIES; i++) { |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 287 | writeb(IOAT_CHANCMD_RESET, |
| 288 | ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| 289 | |
| 290 | chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) & |
Dan Williams | 09c8a5b | 2009-09-08 12:01:49 -0700 | [diff] [blame^] | 291 | IOAT_CHANSTS_STATUS; |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 292 | |
Dan Williams | 09c8a5b | 2009-09-08 12:01:49 -0700 | [diff] [blame^] | 293 | if (chan_sts != IOAT_CHANSTS_ACTIVE) { |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 294 | writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET); |
| 295 | break; |
| 296 | } |
| 297 | udelay(1000); |
| 298 | } |
| 299 | |
| 300 | chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) & |
Dan Williams | 09c8a5b | 2009-09-08 12:01:49 -0700 | [diff] [blame^] | 301 | IOAT_CHANSTS_STATUS; |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 302 | |
| 303 | /* |
| 304 | * We tried to reset multiple times. If IO A/T channel is still active |
| 305 | * flag an error and return without cleanup. Memory leak is better |
| 306 | * than random corruption in that extreme error situation. |
| 307 | */ |
Dan Williams | 09c8a5b | 2009-09-08 12:01:49 -0700 | [diff] [blame^] | 308 | if (chan_sts == IOAT_CHANSTS_ACTIVE) { |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 309 | printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels." |
| 310 | " Not freeing resources\n"); |
| 311 | return; |
| 312 | } |
| 313 | |
| 314 | dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0); |
| 315 | iounmap(ioat_iomap); |
| 316 | } |
| 317 | |
| 318 | /* End: I/O AT Helper routines */ |
| 319 | |
| 320 | #define DIMM_THRTLOW 0x64 |
| 321 | #define DIMM_THRTCTL 0x67 |
| 322 | #define DIMM_THRTCTL_THRMHUNT (1UL << 0) |
| 323 | #define DIMM_MC 0x40 |
| 324 | #define DIMM_GTW_MODE (1UL << 17) |
| 325 | #define DIMM_GBLACT 0x60 |
| 326 | |
| 327 | /* |
| 328 | * Keep track of an exponential-decaying average of recent idle durations. |
| 329 | * The latest duration gets DURATION_WEIGHT_PCT percentage weight |
| 330 | * in this average, with the old average getting the remaining weight. |
| 331 | * |
| 332 | * High weights emphasize recent history, low weights include long history. |
| 333 | */ |
| 334 | #define DURATION_WEIGHT_PCT 55 |
| 335 | |
| 336 | /* |
| 337 | * When the decaying average of recent durations or the predicted duration |
| 338 | * of the next timer interrupt is shorter than duration_threshold, the |
| 339 | * driver will decline to throttle. |
| 340 | */ |
| 341 | #define DURATION_THRESHOLD_US 100 |
| 342 | |
| 343 | |
| 344 | /* Store DIMM thermal throttle configuration */ |
| 345 | static int i7300_idle_thrt_save(void) |
| 346 | { |
| 347 | u32 new_mc_val; |
| 348 | u8 gblactlm; |
| 349 | |
| 350 | pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &i7300_idle_thrtctl_saved); |
| 351 | pci_read_config_byte(fbd_dev, DIMM_THRTLOW, &i7300_idle_thrtlow_saved); |
| 352 | pci_read_config_dword(fbd_dev, DIMM_MC, &i7300_idle_mc_saved); |
| 353 | /* |
| 354 | * Make sure we have Global Throttling Window Mode set to have a |
| 355 | * "short" window. This (mostly) works around an issue where |
| 356 | * throttling persists until the end of the global throttling window |
| 357 | * size. On the tested system, this was resulting in a maximum of |
| 358 | * 64 ms to exit throttling (average 32 ms). The actual numbers |
| 359 | * depends on system frequencies. Setting the short window reduces |
| 360 | * this by a factor of 4096. |
| 361 | * |
| 362 | * We will only do this only if the system is set for |
| 363 | * unlimited-activations while in open-loop throttling (i.e., when |
| 364 | * Global Activation Throttle Limit is zero). |
| 365 | */ |
| 366 | pci_read_config_byte(fbd_dev, DIMM_GBLACT, &gblactlm); |
| 367 | dprintk("thrtctl_saved = 0x%02x, thrtlow_saved = 0x%02x\n", |
| 368 | i7300_idle_thrtctl_saved, |
| 369 | i7300_idle_thrtlow_saved); |
| 370 | dprintk("mc_saved = 0x%08x, gblactlm = 0x%02x\n", |
| 371 | i7300_idle_mc_saved, |
| 372 | gblactlm); |
| 373 | if (gblactlm == 0) { |
| 374 | new_mc_val = i7300_idle_mc_saved | DIMM_GTW_MODE; |
| 375 | pci_write_config_dword(fbd_dev, DIMM_MC, new_mc_val); |
| 376 | return 0; |
| 377 | } else { |
| 378 | dprintk("could not set GTW_MODE = 1 (OLTT enabled)\n"); |
| 379 | return -ENODEV; |
| 380 | } |
| 381 | } |
| 382 | |
| 383 | /* Restore DIMM thermal throttle configuration */ |
| 384 | static void i7300_idle_thrt_restore(void) |
| 385 | { |
| 386 | pci_write_config_dword(fbd_dev, DIMM_MC, i7300_idle_mc_saved); |
| 387 | pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved); |
| 388 | pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved); |
| 389 | } |
| 390 | |
| 391 | /* Enable DIMM thermal throttling */ |
| 392 | static void i7300_idle_start(void) |
| 393 | { |
| 394 | u8 new_ctl; |
| 395 | u8 limit; |
| 396 | |
| 397 | new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT; |
| 398 | pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); |
| 399 | |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 400 | limit = throttle_low_limit; |
| 401 | if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT)) |
| 402 | limit = MAX_THROTTLE_LOW_LIMIT; |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 403 | |
| 404 | pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit); |
| 405 | |
| 406 | new_ctl = i7300_idle_thrtctl_saved | DIMM_THRTCTL_THRMHUNT; |
| 407 | pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); |
| 408 | } |
| 409 | |
| 410 | /* Disable DIMM thermal throttling */ |
| 411 | static void i7300_idle_stop(void) |
| 412 | { |
| 413 | u8 new_ctl; |
| 414 | u8 got_ctl; |
| 415 | |
| 416 | new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT; |
| 417 | pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); |
| 418 | |
| 419 | pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved); |
| 420 | pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved); |
| 421 | pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &got_ctl); |
| 422 | WARN_ON_ONCE(got_ctl != i7300_idle_thrtctl_saved); |
| 423 | } |
| 424 | |
| 425 | |
| 426 | /* |
| 427 | * i7300_avg_duration_check() |
| 428 | * return 0 if the decaying average of recent idle durations is |
| 429 | * more than DURATION_THRESHOLD_US |
| 430 | */ |
| 431 | static int i7300_avg_duration_check(void) |
| 432 | { |
| 433 | if (avg_idle_us >= DURATION_THRESHOLD_US) |
| 434 | return 0; |
| 435 | |
| 436 | #ifdef DEBUG |
| 437 | past_skip++; |
| 438 | #endif |
| 439 | return 1; |
| 440 | } |
| 441 | |
| 442 | /* Idle notifier to look at idle CPUs */ |
| 443 | static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, |
| 444 | void *data) |
| 445 | { |
| 446 | unsigned long flags; |
| 447 | ktime_t now_ktime; |
| 448 | static ktime_t idle_begin_time; |
| 449 | static int time_init = 1; |
| 450 | |
Venki Pallipadi | 33093e1 | 2008-10-22 16:51:03 -0700 | [diff] [blame] | 451 | if (!throttle_low_limit) |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 452 | return 0; |
| 453 | |
| 454 | if (unlikely(time_init)) { |
| 455 | time_init = 0; |
| 456 | idle_begin_time = ktime_get(); |
| 457 | } |
| 458 | |
| 459 | spin_lock_irqsave(&i7300_idle_lock, flags); |
| 460 | if (val == IDLE_START) { |
| 461 | |
| 462 | cpu_set(smp_processor_id(), idle_cpumask); |
| 463 | |
| 464 | if (cpus_weight(idle_cpumask) != num_online_cpus()) |
| 465 | goto end; |
| 466 | |
| 467 | now_ktime = ktime_get(); |
| 468 | idle_begin_time = now_ktime; |
| 469 | |
| 470 | if (i7300_avg_duration_check()) |
| 471 | goto end; |
| 472 | |
| 473 | i7300_idle_active = 1; |
| 474 | total_starts++; |
| 475 | start_ktime = now_ktime; |
| 476 | |
| 477 | i7300_idle_start(); |
| 478 | i7300_idle_ioat_start(); |
| 479 | |
| 480 | } else if (val == IDLE_END) { |
| 481 | cpu_clear(smp_processor_id(), idle_cpumask); |
| 482 | if (cpus_weight(idle_cpumask) == (num_online_cpus() - 1)) { |
| 483 | /* First CPU coming out of idle */ |
| 484 | u64 idle_duration_us; |
| 485 | |
| 486 | now_ktime = ktime_get(); |
| 487 | |
| 488 | idle_duration_us = ktime_to_us(ktime_sub |
| 489 | (now_ktime, idle_begin_time)); |
| 490 | |
| 491 | avg_idle_us = |
| 492 | ((100 - DURATION_WEIGHT_PCT) * avg_idle_us + |
| 493 | DURATION_WEIGHT_PCT * idle_duration_us) / 100; |
| 494 | |
| 495 | if (i7300_idle_active) { |
| 496 | ktime_t idle_ktime; |
| 497 | |
| 498 | idle_ktime = ktime_sub(now_ktime, start_ktime); |
| 499 | total_us += ktime_to_us(idle_ktime); |
| 500 | |
| 501 | i7300_idle_ioat_stop(); |
| 502 | i7300_idle_stop(); |
| 503 | i7300_idle_active = 0; |
| 504 | } |
| 505 | } |
| 506 | } |
| 507 | end: |
| 508 | spin_unlock_irqrestore(&i7300_idle_lock, flags); |
| 509 | return 0; |
| 510 | } |
| 511 | |
| 512 | static struct notifier_block i7300_idle_nb = { |
| 513 | .notifier_call = i7300_idle_notifier, |
| 514 | }; |
| 515 | |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 516 | MODULE_DEVICE_TABLE(pci, pci_tbl); |
| 517 | |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 518 | int stats_open_generic(struct inode *inode, struct file *fp) |
| 519 | { |
| 520 | fp->private_data = inode->i_private; |
| 521 | return 0; |
| 522 | } |
| 523 | |
| 524 | static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count, |
| 525 | loff_t *off) |
| 526 | { |
| 527 | unsigned long *p = fp->private_data; |
| 528 | char buf[32]; |
| 529 | int len; |
| 530 | |
| 531 | len = snprintf(buf, 32, "%lu\n", *p); |
| 532 | return simple_read_from_buffer(ubuf, count, off, buf, len); |
| 533 | } |
| 534 | |
| 535 | static const struct file_operations idle_fops = { |
| 536 | .open = stats_open_generic, |
| 537 | .read = stats_read_ul, |
| 538 | }; |
| 539 | |
| 540 | struct debugfs_file_info { |
| 541 | void *ptr; |
| 542 | char name[32]; |
| 543 | struct dentry *file; |
| 544 | } debugfs_file_list[] = { |
| 545 | {&total_starts, "total_starts", NULL}, |
| 546 | {&total_us, "total_us", NULL}, |
| 547 | #ifdef DEBUG |
| 548 | {&past_skip, "past_skip", NULL}, |
| 549 | #endif |
| 550 | {NULL, "", NULL} |
| 551 | }; |
| 552 | |
| 553 | static int __init i7300_idle_init(void) |
| 554 | { |
| 555 | spin_lock_init(&i7300_idle_lock); |
| 556 | cpus_clear(idle_cpumask); |
| 557 | total_us = 0; |
| 558 | |
Len Brown | 2f10260 | 2009-05-27 23:59:58 -0400 | [diff] [blame] | 559 | if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload)) |
Andy Henroid | 27471fd | 2008-10-09 11:45:22 -0700 | [diff] [blame] | 560 | return -ENODEV; |
| 561 | |
| 562 | if (i7300_idle_thrt_save()) |
| 563 | return -ENODEV; |
| 564 | |
| 565 | if (i7300_idle_ioat_init()) |
| 566 | return -ENODEV; |
| 567 | |
| 568 | debugfs_dir = debugfs_create_dir("i7300_idle", NULL); |
| 569 | if (debugfs_dir) { |
| 570 | int i = 0; |
| 571 | |
| 572 | while (debugfs_file_list[i].ptr != NULL) { |
| 573 | debugfs_file_list[i].file = debugfs_create_file( |
| 574 | debugfs_file_list[i].name, |
| 575 | S_IRUSR, |
| 576 | debugfs_dir, |
| 577 | debugfs_file_list[i].ptr, |
| 578 | &idle_fops); |
| 579 | i++; |
| 580 | } |
| 581 | } |
| 582 | |
| 583 | idle_notifier_register(&i7300_idle_nb); |
| 584 | |
| 585 | printk(KERN_INFO "i7300_idle: loaded v%s\n", I7300_IDLE_DRIVER_VERSION); |
| 586 | return 0; |
| 587 | } |
| 588 | |
| 589 | static void __exit i7300_idle_exit(void) |
| 590 | { |
| 591 | idle_notifier_unregister(&i7300_idle_nb); |
| 592 | |
| 593 | if (debugfs_dir) { |
| 594 | int i = 0; |
| 595 | |
| 596 | while (debugfs_file_list[i].file != NULL) { |
| 597 | debugfs_remove(debugfs_file_list[i].file); |
| 598 | i++; |
| 599 | } |
| 600 | |
| 601 | debugfs_remove(debugfs_dir); |
| 602 | } |
| 603 | i7300_idle_thrt_restore(); |
| 604 | i7300_idle_ioat_exit(); |
| 605 | } |
| 606 | |
| 607 | module_init(i7300_idle_init); |
| 608 | module_exit(i7300_idle_exit); |
| 609 | |
| 610 | MODULE_AUTHOR("Andy Henroid <andrew.d.henroid@intel.com>"); |
| 611 | MODULE_DESCRIPTION("Intel Chipset DIMM Idle Power Saving Driver v" |
| 612 | I7300_IDLE_DRIVER_VERSION); |
| 613 | MODULE_LICENSE("GPL"); |