Bartlomiej Zolnierkiewicz | fd99055 | 2014-03-25 19:51:39 +0100 | [diff] [blame] | 1 | /* |
| 2 | * AHCI SATA platform library |
| 3 | * |
| 4 | * Copyright 2004-2005 Red Hat, Inc. |
| 5 | * Jeff Garzik <jgarzik@pobox.com> |
| 6 | * Copyright 2010 MontaVista Software, LLC. |
| 7 | * Anton Vorontsov <avorontsov@ru.mvista.com> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2, or (at your option) |
| 12 | * any later version. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/clk.h> |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/gfp.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/pm.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/device.h> |
| 22 | #include <linux/platform_device.h> |
| 23 | #include <linux/libata.h> |
| 24 | #include <linux/ahci_platform.h> |
| 25 | #include <linux/phy/phy.h> |
| 26 | #include <linux/pm_runtime.h> |
| 27 | #include "ahci.h" |
| 28 | |
| 29 | static void ahci_host_stop(struct ata_host *host); |
| 30 | |
| 31 | struct ata_port_operations ahci_platform_ops = { |
| 32 | .inherits = &ahci_ops, |
| 33 | .host_stop = ahci_host_stop, |
| 34 | }; |
| 35 | EXPORT_SYMBOL_GPL(ahci_platform_ops); |
| 36 | |
| 37 | static struct scsi_host_template ahci_platform_sht = { |
| 38 | AHCI_SHT("ahci_platform"), |
| 39 | }; |
| 40 | |
| 41 | /** |
| 42 | * ahci_platform_enable_clks - Enable platform clocks |
| 43 | * @hpriv: host private area to store config values |
| 44 | * |
| 45 | * This function enables all the clks found in hpriv->clks, starting at |
| 46 | * index 0. If any clk fails to enable it disables all the clks already |
| 47 | * enabled in reverse order, and then returns an error. |
| 48 | * |
| 49 | * RETURNS: |
| 50 | * 0 on success otherwise a negative error code |
| 51 | */ |
| 52 | int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) |
| 53 | { |
| 54 | int c, rc; |
| 55 | |
| 56 | for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) { |
| 57 | rc = clk_prepare_enable(hpriv->clks[c]); |
| 58 | if (rc) |
| 59 | goto disable_unprepare_clk; |
| 60 | } |
| 61 | return 0; |
| 62 | |
| 63 | disable_unprepare_clk: |
| 64 | while (--c >= 0) |
| 65 | clk_disable_unprepare(hpriv->clks[c]); |
| 66 | return rc; |
| 67 | } |
| 68 | EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); |
| 69 | |
| 70 | /** |
| 71 | * ahci_platform_disable_clks - Disable platform clocks |
| 72 | * @hpriv: host private area to store config values |
| 73 | * |
| 74 | * This function disables all the clks found in hpriv->clks, in reverse |
| 75 | * order of ahci_platform_enable_clks (starting at the end of the array). |
| 76 | */ |
| 77 | void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) |
| 78 | { |
| 79 | int c; |
| 80 | |
| 81 | for (c = AHCI_MAX_CLKS - 1; c >= 0; c--) |
| 82 | if (hpriv->clks[c]) |
| 83 | clk_disable_unprepare(hpriv->clks[c]); |
| 84 | } |
| 85 | EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); |
| 86 | |
| 87 | /** |
| 88 | * ahci_platform_enable_resources - Enable platform resources |
| 89 | * @hpriv: host private area to store config values |
| 90 | * |
| 91 | * This function enables all ahci_platform managed resources in the |
| 92 | * following order: |
| 93 | * 1) Regulator |
| 94 | * 2) Clocks (through ahci_platform_enable_clks) |
| 95 | * 3) Phy |
| 96 | * |
| 97 | * If resource enabling fails at any point the previous enabled resources |
| 98 | * are disabled in reverse order. |
| 99 | * |
| 100 | * RETURNS: |
| 101 | * 0 on success otherwise a negative error code |
| 102 | */ |
| 103 | int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) |
| 104 | { |
| 105 | int rc; |
| 106 | |
| 107 | if (hpriv->target_pwr) { |
| 108 | rc = regulator_enable(hpriv->target_pwr); |
| 109 | if (rc) |
| 110 | return rc; |
| 111 | } |
| 112 | |
| 113 | rc = ahci_platform_enable_clks(hpriv); |
| 114 | if (rc) |
| 115 | goto disable_regulator; |
| 116 | |
| 117 | if (hpriv->phy) { |
| 118 | rc = phy_init(hpriv->phy); |
| 119 | if (rc) |
| 120 | goto disable_clks; |
| 121 | |
| 122 | rc = phy_power_on(hpriv->phy); |
| 123 | if (rc) { |
| 124 | phy_exit(hpriv->phy); |
| 125 | goto disable_clks; |
| 126 | } |
| 127 | } |
| 128 | |
| 129 | return 0; |
| 130 | |
| 131 | disable_clks: |
| 132 | ahci_platform_disable_clks(hpriv); |
| 133 | |
| 134 | disable_regulator: |
| 135 | if (hpriv->target_pwr) |
| 136 | regulator_disable(hpriv->target_pwr); |
| 137 | return rc; |
| 138 | } |
| 139 | EXPORT_SYMBOL_GPL(ahci_platform_enable_resources); |
| 140 | |
| 141 | /** |
| 142 | * ahci_platform_disable_resources - Disable platform resources |
| 143 | * @hpriv: host private area to store config values |
| 144 | * |
| 145 | * This function disables all ahci_platform managed resources in the |
| 146 | * following order: |
| 147 | * 1) Phy |
| 148 | * 2) Clocks (through ahci_platform_disable_clks) |
| 149 | * 3) Regulator |
| 150 | */ |
| 151 | void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) |
| 152 | { |
| 153 | if (hpriv->phy) { |
| 154 | phy_power_off(hpriv->phy); |
| 155 | phy_exit(hpriv->phy); |
| 156 | } |
| 157 | |
| 158 | ahci_platform_disable_clks(hpriv); |
| 159 | |
| 160 | if (hpriv->target_pwr) |
| 161 | regulator_disable(hpriv->target_pwr); |
| 162 | } |
| 163 | EXPORT_SYMBOL_GPL(ahci_platform_disable_resources); |
| 164 | |
| 165 | static void ahci_platform_put_resources(struct device *dev, void *res) |
| 166 | { |
| 167 | struct ahci_host_priv *hpriv = res; |
| 168 | int c; |
| 169 | |
| 170 | if (hpriv->got_runtime_pm) { |
| 171 | pm_runtime_put_sync(dev); |
| 172 | pm_runtime_disable(dev); |
| 173 | } |
| 174 | |
| 175 | for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) |
| 176 | clk_put(hpriv->clks[c]); |
| 177 | } |
| 178 | |
| 179 | /** |
| 180 | * ahci_platform_get_resources - Get platform resources |
| 181 | * @pdev: platform device to get resources for |
| 182 | * |
| 183 | * This function allocates an ahci_host_priv struct, and gets the following |
| 184 | * resources, storing a reference to them inside the returned struct: |
| 185 | * |
| 186 | * 1) mmio registers (IORESOURCE_MEM 0, mandatory) |
| 187 | * 2) regulator for controlling the targets power (optional) |
| 188 | * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, |
| 189 | * or for non devicetree enabled platforms a single clock |
| 190 | * 4) phy (optional) |
| 191 | * |
| 192 | * RETURNS: |
| 193 | * The allocated ahci_host_priv on success, otherwise an ERR_PTR value |
| 194 | */ |
| 195 | struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev) |
| 196 | { |
| 197 | struct device *dev = &pdev->dev; |
| 198 | struct ahci_host_priv *hpriv; |
| 199 | struct clk *clk; |
| 200 | int i, rc = -ENOMEM; |
| 201 | |
| 202 | if (!devres_open_group(dev, NULL, GFP_KERNEL)) |
| 203 | return ERR_PTR(-ENOMEM); |
| 204 | |
| 205 | hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv), |
| 206 | GFP_KERNEL); |
| 207 | if (!hpriv) |
| 208 | goto err_out; |
| 209 | |
| 210 | devres_add(dev, hpriv); |
| 211 | |
| 212 | hpriv->mmio = devm_ioremap_resource(dev, |
| 213 | platform_get_resource(pdev, IORESOURCE_MEM, 0)); |
| 214 | if (IS_ERR(hpriv->mmio)) { |
| 215 | dev_err(dev, "no mmio space\n"); |
| 216 | rc = PTR_ERR(hpriv->mmio); |
| 217 | goto err_out; |
| 218 | } |
| 219 | |
| 220 | hpriv->target_pwr = devm_regulator_get_optional(dev, "target"); |
| 221 | if (IS_ERR(hpriv->target_pwr)) { |
| 222 | rc = PTR_ERR(hpriv->target_pwr); |
| 223 | if (rc == -EPROBE_DEFER) |
| 224 | goto err_out; |
| 225 | hpriv->target_pwr = NULL; |
| 226 | } |
| 227 | |
| 228 | for (i = 0; i < AHCI_MAX_CLKS; i++) { |
| 229 | /* |
| 230 | * For now we must use clk_get(dev, NULL) for the first clock, |
| 231 | * because some platforms (da850, spear13xx) are not yet |
| 232 | * converted to use devicetree for clocks. For new platforms |
| 233 | * this is equivalent to of_clk_get(dev->of_node, 0). |
| 234 | */ |
| 235 | if (i == 0) |
| 236 | clk = clk_get(dev, NULL); |
| 237 | else |
| 238 | clk = of_clk_get(dev->of_node, i); |
| 239 | |
| 240 | if (IS_ERR(clk)) { |
| 241 | rc = PTR_ERR(clk); |
| 242 | if (rc == -EPROBE_DEFER) |
| 243 | goto err_out; |
| 244 | break; |
| 245 | } |
| 246 | hpriv->clks[i] = clk; |
| 247 | } |
| 248 | |
| 249 | hpriv->phy = devm_phy_get(dev, "sata-phy"); |
| 250 | if (IS_ERR(hpriv->phy)) { |
| 251 | rc = PTR_ERR(hpriv->phy); |
| 252 | switch (rc) { |
Bartlomiej Zolnierkiewicz | fd99055 | 2014-03-25 19:51:39 +0100 | [diff] [blame] | 253 | case -ENOSYS: |
Mikko Perttunen | acbd573 | 2014-06-17 15:07:55 +0300 | [diff] [blame] | 254 | /* No PHY support. Check if PHY is required. */ |
| 255 | if (of_find_property(dev->of_node, "phys", NULL)) { |
| 256 | dev_err(dev, "couldn't get sata-phy: ENOSYS\n"); |
| 257 | goto err_out; |
| 258 | } |
| 259 | case -ENODEV: |
Bartlomiej Zolnierkiewicz | fd99055 | 2014-03-25 19:51:39 +0100 | [diff] [blame] | 260 | /* continue normally */ |
| 261 | hpriv->phy = NULL; |
| 262 | break; |
| 263 | |
| 264 | case -EPROBE_DEFER: |
| 265 | goto err_out; |
| 266 | |
| 267 | default: |
| 268 | dev_err(dev, "couldn't get sata-phy\n"); |
| 269 | goto err_out; |
| 270 | } |
| 271 | } |
| 272 | |
| 273 | pm_runtime_enable(dev); |
| 274 | pm_runtime_get_sync(dev); |
| 275 | hpriv->got_runtime_pm = true; |
| 276 | |
| 277 | devres_remove_group(dev, NULL); |
| 278 | return hpriv; |
| 279 | |
| 280 | err_out: |
| 281 | devres_release_group(dev, NULL); |
| 282 | return ERR_PTR(rc); |
| 283 | } |
| 284 | EXPORT_SYMBOL_GPL(ahci_platform_get_resources); |
| 285 | |
| 286 | /** |
| 287 | * ahci_platform_init_host - Bring up an ahci-platform host |
| 288 | * @pdev: platform device pointer for the host |
| 289 | * @hpriv: ahci-host private data for the host |
| 290 | * @pi_template: template for the ata_port_info to use |
Kefeng Wang | f9f3691 | 2014-05-14 14:13:41 +0800 | [diff] [blame] | 291 | * @host_flags: ahci host flags used in ahci_host_priv |
Bartlomiej Zolnierkiewicz | fd99055 | 2014-03-25 19:51:39 +0100 | [diff] [blame] | 292 | * @force_port_map: param passed to ahci_save_initial_config |
| 293 | * @mask_port_map: param passed to ahci_save_initial_config |
| 294 | * |
| 295 | * This function does all the usual steps needed to bring up an |
| 296 | * ahci-platform host, note any necessary resources (ie clks, phy, etc.) |
| 297 | * must be initialized / enabled before calling this. |
| 298 | * |
| 299 | * RETURNS: |
| 300 | * 0 on success otherwise a negative error code |
| 301 | */ |
| 302 | int ahci_platform_init_host(struct platform_device *pdev, |
| 303 | struct ahci_host_priv *hpriv, |
| 304 | const struct ata_port_info *pi_template, |
Kefeng Wang | f9f3691 | 2014-05-14 14:13:41 +0800 | [diff] [blame] | 305 | unsigned long host_flags, |
Bartlomiej Zolnierkiewicz | fd99055 | 2014-03-25 19:51:39 +0100 | [diff] [blame] | 306 | unsigned int force_port_map, |
| 307 | unsigned int mask_port_map) |
| 308 | { |
| 309 | struct device *dev = &pdev->dev; |
| 310 | struct ata_port_info pi = *pi_template; |
| 311 | const struct ata_port_info *ppi[] = { &pi, NULL }; |
| 312 | struct ata_host *host; |
| 313 | int i, irq, n_ports, rc; |
| 314 | |
| 315 | irq = platform_get_irq(pdev, 0); |
| 316 | if (irq <= 0) { |
| 317 | dev_err(dev, "no irq\n"); |
| 318 | return -EINVAL; |
| 319 | } |
| 320 | |
| 321 | /* prepare host */ |
Kefeng Wang | f9f3691 | 2014-05-14 14:13:41 +0800 | [diff] [blame] | 322 | pi.private_data = (void *)host_flags; |
| 323 | hpriv->flags |= host_flags; |
Bartlomiej Zolnierkiewicz | fd99055 | 2014-03-25 19:51:39 +0100 | [diff] [blame] | 324 | |
| 325 | ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map); |
| 326 | |
| 327 | if (hpriv->cap & HOST_CAP_NCQ) |
| 328 | pi.flags |= ATA_FLAG_NCQ; |
| 329 | |
| 330 | if (hpriv->cap & HOST_CAP_PMP) |
| 331 | pi.flags |= ATA_FLAG_PMP; |
| 332 | |
| 333 | ahci_set_em_messages(hpriv, &pi); |
| 334 | |
| 335 | /* CAP.NP sometimes indicate the index of the last enabled |
| 336 | * port, at other times, that of the last possible port, so |
| 337 | * determining the maximum port number requires looking at |
| 338 | * both CAP.NP and port_map. |
| 339 | */ |
| 340 | n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); |
| 341 | |
| 342 | host = ata_host_alloc_pinfo(dev, ppi, n_ports); |
| 343 | if (!host) |
| 344 | return -ENOMEM; |
| 345 | |
| 346 | host->private_data = hpriv; |
| 347 | |
| 348 | if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) |
| 349 | host->flags |= ATA_HOST_PARALLEL_SCAN; |
| 350 | else |
| 351 | dev_info(dev, "SSS flag set, parallel bus scan disabled\n"); |
| 352 | |
| 353 | if (pi.flags & ATA_FLAG_EM) |
| 354 | ahci_reset_em(host); |
| 355 | |
| 356 | for (i = 0; i < host->n_ports; i++) { |
| 357 | struct ata_port *ap = host->ports[i]; |
| 358 | |
| 359 | ata_port_desc(ap, "mmio %pR", |
| 360 | platform_get_resource(pdev, IORESOURCE_MEM, 0)); |
| 361 | ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); |
| 362 | |
| 363 | /* set enclosure management message type */ |
| 364 | if (ap->flags & ATA_FLAG_EM) |
| 365 | ap->em_message_type = hpriv->em_msg_type; |
| 366 | |
| 367 | /* disabled/not-implemented port */ |
| 368 | if (!(hpriv->port_map & (1 << i))) |
| 369 | ap->ops = &ata_dummy_port_ops; |
| 370 | } |
| 371 | |
| 372 | rc = ahci_reset_controller(host); |
| 373 | if (rc) |
| 374 | return rc; |
| 375 | |
| 376 | ahci_init_controller(host); |
| 377 | ahci_print_info(host, "platform"); |
| 378 | |
| 379 | return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, |
| 380 | &ahci_platform_sht); |
| 381 | } |
| 382 | EXPORT_SYMBOL_GPL(ahci_platform_init_host); |
| 383 | |
| 384 | static void ahci_host_stop(struct ata_host *host) |
| 385 | { |
| 386 | struct device *dev = host->dev; |
| 387 | struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| 388 | struct ahci_host_priv *hpriv = host->private_data; |
| 389 | |
| 390 | if (pdata && pdata->exit) |
| 391 | pdata->exit(dev); |
| 392 | |
| 393 | ahci_platform_disable_resources(hpriv); |
| 394 | } |
| 395 | |
| 396 | #ifdef CONFIG_PM_SLEEP |
| 397 | /** |
| 398 | * ahci_platform_suspend_host - Suspend an ahci-platform host |
| 399 | * @dev: device pointer for the host |
| 400 | * |
| 401 | * This function does all the usual steps needed to suspend an |
| 402 | * ahci-platform host, note any necessary resources (ie clks, phy, etc.) |
| 403 | * must be disabled after calling this. |
| 404 | * |
| 405 | * RETURNS: |
| 406 | * 0 on success otherwise a negative error code |
| 407 | */ |
| 408 | int ahci_platform_suspend_host(struct device *dev) |
| 409 | { |
| 410 | struct ata_host *host = dev_get_drvdata(dev); |
| 411 | struct ahci_host_priv *hpriv = host->private_data; |
| 412 | void __iomem *mmio = hpriv->mmio; |
| 413 | u32 ctl; |
| 414 | |
| 415 | if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { |
| 416 | dev_err(dev, "firmware update required for suspend/resume\n"); |
| 417 | return -EIO; |
| 418 | } |
| 419 | |
| 420 | /* |
| 421 | * AHCI spec rev1.1 section 8.3.3: |
| 422 | * Software must disable interrupts prior to requesting a |
| 423 | * transition of the HBA to D3 state. |
| 424 | */ |
| 425 | ctl = readl(mmio + HOST_CTL); |
| 426 | ctl &= ~HOST_IRQ_EN; |
| 427 | writel(ctl, mmio + HOST_CTL); |
| 428 | readl(mmio + HOST_CTL); /* flush */ |
| 429 | |
| 430 | return ata_host_suspend(host, PMSG_SUSPEND); |
| 431 | } |
| 432 | EXPORT_SYMBOL_GPL(ahci_platform_suspend_host); |
| 433 | |
| 434 | /** |
| 435 | * ahci_platform_resume_host - Resume an ahci-platform host |
| 436 | * @dev: device pointer for the host |
| 437 | * |
| 438 | * This function does all the usual steps needed to resume an ahci-platform |
| 439 | * host, note any necessary resources (ie clks, phy, etc.) must be |
| 440 | * initialized / enabled before calling this. |
| 441 | * |
| 442 | * RETURNS: |
| 443 | * 0 on success otherwise a negative error code |
| 444 | */ |
| 445 | int ahci_platform_resume_host(struct device *dev) |
| 446 | { |
| 447 | struct ata_host *host = dev_get_drvdata(dev); |
| 448 | int rc; |
| 449 | |
| 450 | if (dev->power.power_state.event == PM_EVENT_SUSPEND) { |
| 451 | rc = ahci_reset_controller(host); |
| 452 | if (rc) |
| 453 | return rc; |
| 454 | |
| 455 | ahci_init_controller(host); |
| 456 | } |
| 457 | |
| 458 | ata_host_resume(host); |
| 459 | |
| 460 | return 0; |
| 461 | } |
| 462 | EXPORT_SYMBOL_GPL(ahci_platform_resume_host); |
| 463 | |
| 464 | /** |
| 465 | * ahci_platform_suspend - Suspend an ahci-platform device |
| 466 | * @dev: the platform device to suspend |
| 467 | * |
| 468 | * This function suspends the host associated with the device, followed by |
| 469 | * disabling all the resources of the device. |
| 470 | * |
| 471 | * RETURNS: |
| 472 | * 0 on success otherwise a negative error code |
| 473 | */ |
| 474 | int ahci_platform_suspend(struct device *dev) |
| 475 | { |
| 476 | struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| 477 | struct ata_host *host = dev_get_drvdata(dev); |
| 478 | struct ahci_host_priv *hpriv = host->private_data; |
| 479 | int rc; |
| 480 | |
| 481 | rc = ahci_platform_suspend_host(dev); |
| 482 | if (rc) |
| 483 | return rc; |
| 484 | |
| 485 | if (pdata && pdata->suspend) { |
| 486 | rc = pdata->suspend(dev); |
| 487 | if (rc) |
| 488 | goto resume_host; |
| 489 | } |
| 490 | |
| 491 | ahci_platform_disable_resources(hpriv); |
| 492 | |
| 493 | return 0; |
| 494 | |
| 495 | resume_host: |
| 496 | ahci_platform_resume_host(dev); |
| 497 | return rc; |
| 498 | } |
| 499 | EXPORT_SYMBOL_GPL(ahci_platform_suspend); |
| 500 | |
| 501 | /** |
| 502 | * ahci_platform_resume - Resume an ahci-platform device |
| 503 | * @dev: the platform device to resume |
| 504 | * |
| 505 | * This function enables all the resources of the device followed by |
| 506 | * resuming the host associated with the device. |
| 507 | * |
| 508 | * RETURNS: |
| 509 | * 0 on success otherwise a negative error code |
| 510 | */ |
| 511 | int ahci_platform_resume(struct device *dev) |
| 512 | { |
| 513 | struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| 514 | struct ata_host *host = dev_get_drvdata(dev); |
| 515 | struct ahci_host_priv *hpriv = host->private_data; |
| 516 | int rc; |
| 517 | |
| 518 | rc = ahci_platform_enable_resources(hpriv); |
| 519 | if (rc) |
| 520 | return rc; |
| 521 | |
| 522 | if (pdata && pdata->resume) { |
| 523 | rc = pdata->resume(dev); |
| 524 | if (rc) |
| 525 | goto disable_resources; |
| 526 | } |
| 527 | |
| 528 | rc = ahci_platform_resume_host(dev); |
| 529 | if (rc) |
| 530 | goto disable_resources; |
| 531 | |
| 532 | /* We resumed so update PM runtime state */ |
| 533 | pm_runtime_disable(dev); |
| 534 | pm_runtime_set_active(dev); |
| 535 | pm_runtime_enable(dev); |
| 536 | |
| 537 | return 0; |
| 538 | |
| 539 | disable_resources: |
| 540 | ahci_platform_disable_resources(hpriv); |
| 541 | |
| 542 | return rc; |
| 543 | } |
| 544 | EXPORT_SYMBOL_GPL(ahci_platform_resume); |
| 545 | #endif |
| 546 | |
| 547 | MODULE_DESCRIPTION("AHCI SATA platform library"); |
| 548 | MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); |
| 549 | MODULE_LICENSE("GPL"); |