Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 130a70323c323046b15a76ef1147b1fe700afd10 / . / drivers / mfd / Kconfig
blob: f147395bac9a1ef14b5afee016d17e1d0f89e40f [file] [log] [blame]
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]1#
2# Multifunction miscellaneous devices
3#
4
Arnd Bergmann8a0a8e82011-09-02 16:43:36 +0200[diff] [blame]5if HAS_IOMEM
6menu "Multifunction device drivers"
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]7
Dmitry Baryshkovaa613de2008-06-27 10:37:19 +0100[diff] [blame]8config MFD_CORE
9 tristate
10 default n
11
Haojian Zhuang2cc50be2010-01-06 17:07:13 -0500[diff] [blame]12config MFD_88PM860X
13 bool "Support Marvell 88PM8606/88PM8607"
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]14 depends on I2C=y && GENERIC_HARDIRQS
Jett.Zhoub46a36c2011-11-11 15:38:27 +0800[diff] [blame]15 select REGMAP_I2C
Haojian Zhuang2cc50be2010-01-06 17:07:13 -0500[diff] [blame]16 select MFD_CORE
17 help
18 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
19 This includes the I2C driver and the core APIs _only_, you have to
20 select individual components like voltage regulators, RTC and
21 battery-charger under the corresponding menus.
22
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]23config MFD_SM501
24 tristate "Support for Silicon Motion SM501"
25 ---help---
26 This is the core driver for the Silicon Motion SM501 multimedia
27 companion chip. This device is a multifunction device which may
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200[diff] [blame]28 provide numerous interfaces including USB host controller, USB gadget,
29 asynchronous serial ports, audio functions, and a dual display video
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]30 interface. The device may be connected by PCI or local bus with
31 varying functions enabled.
32
Ben Dooksf61be272008-07-25 01:45:59 -0700[diff] [blame]33config MFD_SM501_GPIO
34 bool "Export GPIO via GPIO layer"
Samuel Ortiz2eedd602008-09-25 00:39:05 +0200[diff] [blame]35 depends on MFD_SM501 && GPIOLIB
Ben Dooksf61be272008-07-25 01:45:59 -0700[diff] [blame]36 ---help---
37 This option uses the gpio library layer to export the 64 GPIO
38 lines on the SM501. The platform data is used to supply the
39 base number for the first GPIO line to register.
40
Samuel Ortizfa9ff4b2008-02-07 00:14:49 -0800[diff] [blame]41config MFD_ASIC3
42 bool "Support for Compaq ASIC3"
Samuel Ortiz2eedd602008-09-25 00:39:05 +0200[diff] [blame]43 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabel9461f652009-06-15 12:10:24 +0200[diff] [blame]44 select MFD_CORE
Samuel Ortizfa9ff4b2008-02-07 00:14:49 -0800[diff] [blame]45 ---help---
46 This driver supports the ASIC3 multifunction chip found on many
47 PDAs (mainly iPAQ and HTC based ones)
48
Miguel Aguilarca263082010-03-11 09:32:21 -0600[diff] [blame]49config MFD_DAVINCI_VOICECODEC
50 tristate
51 select MFD_CORE
52
David Brownell0931a4c2008-12-22 12:05:27 +0100[diff] [blame]53config MFD_DM355EVM_MSP
54 bool "DaVinci DM355 EVM microcontroller"
Samuel Ortiz1819ebc2010-09-20 00:19:27 +0200[diff] [blame]55 depends on I2C=y && MACH_DAVINCI_DM355_EVM
David Brownell0931a4c2008-12-22 12:05:27 +0100[diff] [blame]56 help
57 This driver supports the MSP430 microcontroller used on these
58 boards. MSP430 firmware manages resets and power sequencing,
59 inputs from buttons and the IR remote, LEDs, an RTC, and more.
60
Cyril Chemparathy03df0f62011-01-18 19:21:35 +0000[diff] [blame]61config MFD_TI_SSP
62 tristate "TI Sequencer Serial Port support"
63 depends on ARCH_DAVINCI_TNETV107X
64 select MFD_CORE
65 ---help---
66 Say Y here if you want support for the Sequencer Serial Port
67 in a Texas Instruments TNETV107X SoC.
68
69 To compile this driver as a module, choose M here: the
70 module will be called ti-ssp.
71
Philipp Zabela1635b82008-04-09 19:20:34 +0100[diff] [blame]72config HTC_EGPIO
73 bool "HTC EGPIO support"
Michael Buesch7444a722008-07-25 01:46:11 -0700[diff] [blame]74 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabela1635b82008-04-09 19:20:34 +0100[diff] [blame]75 help
76 This driver supports the CPLD egpio chip present on
77 several HTC phones. It provides basic support for input
78 pins, output pins, and irqs.
79
Philipp Zabel5dc33392008-04-12 13:25:41 +0100[diff] [blame]80config HTC_PASIC3
81 tristate "HTC PASIC3 LED/DS1WM chip support"
Philipp Zabel0254a8f2009-02-17 10:06:45 +0100[diff] [blame]82 select MFD_CORE
Philipp Zabel5dc33392008-04-12 13:25:41 +0100[diff] [blame]83 help
84 This core driver provides register access for the LED/DS1WM
85 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
86 HTC Magician devices, respectively. Actual functionality is
87 handled by the leds-pasic3 and ds1wm drivers.
88
Cory Maccarrone6048a3d2010-01-19 11:22:45 +0100[diff] [blame]89config HTC_I2CPLD
90 bool "HTC I2C PLD chip support"
Randy Dunlapbef3e202010-01-20 19:55:34 -0800[diff] [blame]91 depends on I2C=y && GPIOLIB
Cory Maccarrone6048a3d2010-01-19 11:22:45 +0100[diff] [blame]92 help
93 If you say yes here you get support for the supposed CPLD
94 found on omap850 HTC devices like the HTC Wizard and HTC Herald.
95 This device provides input and output GPIOs through an I2C
96 interface to one or more sub-chips.
97
Marek Vašutd9105c22008-08-03 21:34:08 +0100[diff] [blame]98config UCB1400_CORE
99 tristate "Philips UCB1400 Core driver"
Randy Dunlape4831802008-10-15 13:29:07 +0200[diff] [blame]100 depends on AC97_BUS
Andrew Morton5a49a542008-10-15 13:30:47 +0200[diff] [blame]101 depends on GPIOLIB
Marek Vašutd9105c22008-08-03 21:34:08 +0100[diff] [blame]102 help
103 This enables support for the Philips UCB1400 core functions.
104 The UCB1400 is an AC97 audio codec.
105
106 To compile this driver as a module, choose M here: the
107 module will be called ucb1400_core.
108
Linus Walleij798a8ee2011-03-09 13:02:38 +0100[diff] [blame]109config TPS6105X
110 tristate "TPS61050/61052 Boost Converters"
111 depends on I2C
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]112 select REGULATOR
Guenter Roeckfc498fa2011-03-24 12:12:47 -0700[diff] [blame]113 select MFD_CORE
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]114 select REGULATOR_FIXED_VOLTAGE
Linus Walleij798a8ee2011-03-09 13:02:38 +0100[diff] [blame]115 help
116 This option enables a driver for the TP61050/TPS61052
117 high-power "white LED driver". This boost converter is
118 sometimes used for other things than white LEDs, and
119 also contains a GPIO pin.
120
David Brownell87c13492008-12-22 12:16:27 +0100[diff] [blame]121config TPS65010
122 tristate "TPS6501x Power Management chips"
123 depends on I2C && GPIOLIB
124 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
125 help
126 If you say yes here you get support for the TPS6501x series of
127 Power Management chips. These include voltage regulators,
128 lithium ion/polymer battery charging, and other features that
129 are often used in portable devices like cell phones and cameras.
130
131 This driver can also be built as a module. If so, the module
132 will be called tps65010.
133
Todd Fischer31dd6a22010-04-08 09:04:55 +0200[diff] [blame]134config TPS6507X
135 tristate "TPS6507x Power Management / Touch Screen chips"
136 select MFD_CORE
137 depends on I2C
138 help
139 If you say yes here you get support for the TPS6507x series of
140 Power Management / Touch Screen chips. These include voltage
141 regulators, lithium ion/polymer battery charging, touch screen
142 and other features that are often used in portable devices.
143 This driver can also be built as a module. If so, the module
144 will be called tps6507x.
145
Axel Lin37df0032011-04-15 20:04:45 +0800[diff] [blame]146config MFD_TPS6586X
147 bool "TPS6586x Power Management chips"
148 depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
149 select MFD_CORE
150 help
151 If you say yes here you get support for the TPS6586X series of
152 Power Management chips.
153 This driver provides common support for accessing the device,
154 additional drivers must be enabled in order to use the
155 functionality of the device.
156
157 This driver can also be built as a module. If so, the module
158 will be called tps6586x.
159
Linus Walleij54f323b2011-07-04 17:34:16 +0200[diff] [blame]160config MFD_TPS65910
161 bool "TPS65910 Power Management chip"
162 depends on I2C=y && GPIOLIB
163 select MFD_CORE
164 select GPIO_TPS65910
165 help
166 if you say yes here you get support for the TPS65910 series of
167 Power Management chips.
168
Margarita Olaya36e52872011-06-09 14:50:00 -0500[diff] [blame]169config MFD_TPS65912
Mark Brown56088012011-06-22 14:53:58 +0100[diff] [blame]170 bool
Margarita Olaya36e52872011-06-09 14:50:00 -0500[diff] [blame]171 depends on GPIOLIB
172
173config MFD_TPS65912_I2C
174 bool "TPS95612 Power Management chip with I2C"
175 select MFD_CORE
176 select MFD_TPS65912
177 depends on I2C=y && GPIOLIB
178 help
179 If you say yes here you get support for the TPS65912 series of
180 PM chips with I2C interface.
181
182config MFD_TPS65912_SPI
183 bool "TPS65912 Power Management chip with SPI"
184 select MFD_CORE
185 select MFD_TPS65912
186 depends on SPI_MASTER && GPIOLIB
187 help
188 If you say yes here you get support for the TPS65912 series of
189 PM chips with SPI interface.
190
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]191config MENELAUS
192 bool "Texas Instruments TWL92330/Menelaus PM chip"
Tony Lindgren088ef952010-02-12 12:26:47 -0800[diff] [blame]193 depends on I2C=y && ARCH_OMAP2
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]194 help
195 If you say yes here you get support for the Texas Instruments
196 TWL92330/Menelaus Power Management chip. This include voltage
Matt LaPlante692105b2009-01-26 11:12:25 +0100[diff] [blame]197 regulators, Dual slot memory card transceivers, real-time clock
David Brownell88e75cc2008-12-22 12:18:02 +0100[diff] [blame]198 and other features that are often used in portable devices like
199 cell phones and PDAs.
200
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]201config TWL4030_CORE
Balaji T Ke8deb282009-12-14 00:25:31 +0100[diff] [blame]202 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
Russell King62525472012-02-07 09:47:21 +0000[diff] [blame]203 depends on I2C=y && GENERIC_HARDIRQS
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]204 help
Balaji T Ke8deb282009-12-14 00:25:31 +0100[diff] [blame]205 Say yes here if you have TWL4030 / TWL6030 family chip on your board.
David Brownella603a7f2008-10-15 12:15:39 +0200[diff] [blame]206 This core driver provides register access and IRQ handling
207 facilities, and registers devices for the various functions
208 so that function-specific drivers can bind to them.
209
210 These multi-function chips are found on many OMAP2 and OMAP3
211 boards, providing power management, RTC, GPIO, keypad, a
212 high speed USB OTG transceiver, an audio codec (on most
213 versions) and many other features.
214
Keerthyf99c1d42011-03-01 19:12:26 +0530[diff] [blame]215config TWL4030_MADC
216 tristate "Texas Instruments TWL4030 MADC"
217 depends on TWL4030_CORE
218 help
219 This driver provides support for triton TWL4030-MADC. The
220 driver supports both RT and SW conversion methods.
221
222 This driver can be built as a module. If so it will be
223 named twl4030-madc
224
Amit Kucheriaebf0bd32009-08-31 18:32:18 +0200[diff] [blame]225config TWL4030_POWER
226 bool "Support power resources on TWL4030 family chips"
227 depends on TWL4030_CORE && ARM
228 help
229 Say yes here if you want to use the power resources on the
230 TWL4030 family chips. Most of these resources are regulators,
231 which have a separate driver; some are control signals, such
232 as clock request handshaking.
233
234 This driver uses board-specific data to initialize the resources
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300[diff] [blame]235 and load scripts controlling which resources are switched off/on
Amit Kucheriaebf0bd32009-08-31 18:32:18 +0200[diff] [blame]236 or reset when a sleep, wakeup or warm reset event occurs.
237
Peter Ujfalusi57fe7252011-05-31 12:02:49 +0300[diff] [blame]238config MFD_TWL4030_AUDIO
Peter Ujfalusi0b83dde2009-10-22 13:26:45 +0300[diff] [blame]239 bool
240 depends on TWL4030_CORE
241 select MFD_CORE
242 default n
243
Hemanth V31fc03d2010-07-14 12:04:56 +0200[diff] [blame]244config TWL6030_PWM
245 tristate "TWL6030 PWM (Pulse Width Modulator) Support"
246 depends on TWL4030_CORE
247 select HAVE_PWM
248 default n
249 help
250 Say yes here if you want support for TWL6030 PWM.
251 This is used to control charging LED brightness.
252
Misael Lopez Cruzf19b2822011-04-27 02:14:07 -0500[diff] [blame]253config TWL6040_CORE
254 bool
255 depends on TWL4030_CORE && GENERIC_HARDIRQS
256 select MFD_CORE
257 default n
258
Rabin Vincent27e34992010-07-02 16:52:08 +0530[diff] [blame]259config MFD_STMPE
260 bool "Support STMicroelectronics STMPE"
Viresh Kumare7899952011-11-17 11:02:21 +0530[diff] [blame]261 depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
Rabin Vincent27e34992010-07-02 16:52:08 +0530[diff] [blame]262 select MFD_CORE
263 help
264 Support for the STMPE family of I/O Expanders from
265 STMicroelectronics.
266
267 Currently supported devices are:
268
269 STMPE811: GPIO, Touchscreen
270 STMPE1601: GPIO, Keypad
271 STMPE2401: GPIO, Keypad
272 STMPE2403: GPIO, Keypad
273
274 This driver provides common support for accessing the device,
275 additional drivers must be enabled in order to use the functionality
276 of the device. Currently available sub drivers are:
277
278 GPIO: stmpe-gpio
279 Keypad: stmpe-keypad
280 Touchscreen: stmpe-ts
281
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]282menu "STMPE Interface Drivers"
283depends on MFD_STMPE
284
285config STMPE_I2C
286 bool "STMPE I2C Inteface"
Samuel Ortizeedea802011-12-20 18:28:19 +0100[diff] [blame]287 depends on I2C=y
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]288 default y
289 help
290 This is used to enable I2C interface of STMPE
Viresh Kumare7899952011-11-17 11:02:21 +0530[diff] [blame]291
292config STMPE_SPI
293 bool "STMPE SPI Inteface"
294 depends on SPI_MASTER
295 help
296 This is used to enable SPI interface of STMPE
Viresh Kumar1a6e4b72011-11-17 11:02:20 +0530[diff] [blame]297endmenu
298
Sundar Iyerf4e8afd2010-12-13 09:33:13 +0530[diff] [blame]299config MFD_TC3589X
300 bool "Support Toshiba TC35892 and variants"
Rabin Vincentb4ecd322010-05-10 23:39:47 +0200[diff] [blame]301 depends on I2C=y && GENERIC_HARDIRQS
302 select MFD_CORE
303 help
Sundar Iyerf4e8afd2010-12-13 09:33:13 +0530[diff] [blame]304 Support for the Toshiba TC35892 and variants I/O Expander.
Rabin Vincentb4ecd322010-05-10 23:39:47 +0200[diff] [blame]305
306 This driver provides common support for accessing the device,
307 additional drivers must be enabled in order to use the
308 functionality of the device.
309
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]310config MFD_TMIO
311 bool
312 default n
313
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]314config MFD_T7L66XB
315 bool "Support Toshiba T7L66XB"
Al Viro9ca68232008-11-01 18:19:59 +0000[diff] [blame]316 depends on ARM && HAVE_CLK
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]317 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]318 select MFD_TMIO
Ian Molton1f192012008-07-15 15:09:43 +0100[diff] [blame]319 help
320 Support for Toshiba Mobile IO Controller T7L66XB
321
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]322config MFD_TC6387XB
323 bool "Support Toshiba TC6387XB"
Al Viro9ca68232008-11-01 18:19:59 +0000[diff] [blame]324 depends on ARM && HAVE_CLK
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]325 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]326 select MFD_TMIO
Ian Moltoncbdfb422008-07-15 15:12:52 +0100[diff] [blame]327 help
328 Support for Toshiba Mobile IO Controller TC6387XB
329
Dmitry Baryshkovd6315942008-06-22 12:01:58 +0100[diff] [blame]330config MFD_TC6393XB
331 bool "Support Toshiba TC6393XB"
Christoph Fritze959da12011-11-29 19:38:38 +0100[diff] [blame]332 depends on GPIOLIB && ARM && HAVE_CLK
Dmitry Baryshkovf024ff12008-06-27 10:37:57 +0100[diff] [blame]333 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200[diff] [blame]334 select MFD_TMIO
Dmitry Baryshkovd6315942008-06-22 12:01:58 +0100[diff] [blame]335 help
336 Support for Toshiba Mobile IO Controller TC6393XB
337
Samuel Ortiz8e2eaab2008-10-24 17:10:05 +0200[diff] [blame]338config PMIC_DA903X
339 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
340 depends on I2C=y
341 help
342 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
343 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
344 usually found on PXA processors-based platforms. This includes
345 the I2C driver and the core APIs _only_, you have to select
346 individual components like LCD backlight, voltage regulators,
347 LEDs and battery-charger under the corresponding menus.
348
Ashish Jangam84c99db2011-12-12 20:06:56 +0530[diff] [blame]349config PMIC_DA9052
350 bool
351 select MFD_CORE
352
Ashish Jangamcfe04472011-12-12 20:37:41 +0530[diff] [blame]353config MFD_DA9052_SPI
354 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
355 select REGMAP_SPI
356 select REGMAP_IRQ
357 select PMIC_DA9052
358 depends on SPI_MASTER=y
359 help
360 Support for the Dialog Semiconductor DA9052 PMIC
361 when controlled using SPI. This driver provides common support
362 for accessing the device, additional drivers must be enabled in
363 order to use the functionality of the device.
364
Ashish Jangam84c99db2011-12-12 20:06:56 +0530[diff] [blame]365config MFD_DA9052_I2C
366 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
367 select REGMAP_I2C
368 select REGMAP_IRQ
369 select PMIC_DA9052
370 depends on I2C=y
371 help
372 Support for the Dialog Semiconductor DA9052 PMIC
373 when controlled using I2C. This driver provides common support
374 for accessing the device, additional drivers must be enabled in
375 order to use the functionality of the device.
376
Michael Hennericha5736e02009-10-12 17:22:38 +0200[diff] [blame]377config PMIC_ADP5520
378 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
379 depends on I2C=y
380 help
381 Say yes here to add support for Analog Devices AD5520 and ADP5501,
382 Multifunction Power Management IC. This includes
383 the I2C driver and the core APIs _only_, you have to select
384 individual components like LCD backlight, LEDs, GPIOs and Kepad
385 under the corresponding menus.
386
Haojian Zhuangd50f8f32010-01-08 12:29:23 +0100[diff] [blame]387config MFD_MAX8925
Haojian Zhuang1f1cf8f2010-02-05 16:07:54 +0100[diff] [blame]388 bool "Maxim Semiconductor MAX8925 PMIC Support"
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]389 depends on I2C=y && GENERIC_HARDIRQS
Haojian Zhuang1ad99892010-01-08 12:43:29 -0500[diff] [blame]390 select MFD_CORE
Haojian Zhuangd50f8f32010-01-08 12:29:23 +0100[diff] [blame]391 help
392 Say yes here to support for Maxim Semiconductor MAX8925. This is
393 a Power Management IC. This driver provies common support for
394 accessing the device, additional drivers must be enabled in order
395 to use the functionality of the device.
396
MyungJoo Ham527e7e92011-03-04 15:50:26 +0900[diff] [blame]397config MFD_MAX8997
398 bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
399 depends on I2C=y && GENERIC_HARDIRQS
400 select MFD_CORE
401 help
402 Say yes here to support for Maxim Semiconductor MAX8998/8966.
403 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
404 MUIC controls on chip.
Randy Dunlapd7e8c012011-03-14 11:28:37 +0100[diff] [blame]405 This driver provides common support for accessing the device;
MyungJoo Ham527e7e92011-03-04 15:50:26 +0900[diff] [blame]406 additional drivers must be enabled in order to use the functionality
407 of the device.
408
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]409config MFD_MAX8998
Kyungmin Parkf8539dd2010-08-23 13:46:49 +0900[diff] [blame]410 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
Joonyoung Shim2c7e6f52010-09-10 18:36:39 +0200[diff] [blame]411 depends on I2C=y && GENERIC_HARDIRQS
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]412 select MFD_CORE
413 help
Kyungmin Parkf8539dd2010-08-23 13:46:49 +0900[diff] [blame]414 Say yes here to support for Maxim Semiconductor MAX8998 and
415 National Semiconductor LP3974. This is a Power Management IC.
416 This driver provies common support for accessing the device,
417 additional drivers must be enabled in order to use the functionality
418 of the device.
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]419
Sangbeom Kimc3d4d692012-01-09 00:09:09 +0100[diff] [blame]420config MFD_S5M_CORE
421 bool "SAMSUNG S5M Series Support"
422 depends on I2C=y && GENERIC_HARDIRQS
423 select MFD_CORE
424 select REGMAP_I2C
425 help
426 Support for the Samsung Electronics S5M MFD series.
427 This driver provies common support for accessing the device,
428 additional drivers must be enabled in order to use the functionality
429 of the device
430
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]431config MFD_WM8400
432 tristate "Support Wolfson Microelectronics WM8400"
Mark Brownb8380c12008-12-18 10:54:22 +0100[diff] [blame]433 select MFD_CORE
Mark Brown9c366452008-10-24 17:16:11 +0200[diff] [blame]434 depends on I2C
Mark Brown2b247d02011-08-23 18:56:19 +0100[diff] [blame]435 select REGMAP_I2C
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]436 help
437 Support for the Wolfson Microelecronics WM8400 PMIC and audio
Mark Brown9e5aca52009-05-29 11:34:18 +0100[diff] [blame]438 CODEC. This driver provides common support for accessing
Mark Brown1d9f9f02008-09-10 18:58:42 +0100[diff] [blame]439 the device, additional drivers must be enabled in order to use
440 the functionality of the device.
441
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]442config MFD_WM831X
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]443 bool
444 depends on GENERIC_HARDIRQS
445
446config MFD_WM831X_I2C
447 bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]448 select MFD_CORE
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]449 select MFD_WM831X
Mark Brown1df59812011-06-10 19:28:10 +0100[diff] [blame]450 select REGMAP_I2C
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]451 depends on I2C=y && GENERIC_HARDIRQS
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]452 help
Mark Browne5b48682010-10-19 23:57:56 +0200[diff] [blame]453 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
454 when controlled using I2C. This driver provides common support
455 for accessing the device, additional drivers must be enabled in
456 order to use the functionality of the device.
Mark Brownb11062b2009-07-27 14:45:58 +0100[diff] [blame]457
Mark Brown2aa13b92010-10-20 00:00:11 +0200[diff] [blame]458config MFD_WM831X_SPI
459 bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
460 select MFD_CORE
461 select MFD_WM831X
Mark Brown1df59812011-06-10 19:28:10 +0100[diff] [blame]462 select REGMAP_SPI
Mark Brown2aa13b92010-10-20 00:00:11 +0200[diff] [blame]463 depends on SPI_MASTER && GENERIC_HARDIRQS
464 help
465 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
466 when controlled using SPI. This driver provides common support
467 for accessing the device, additional drivers must be enabled in
468 order to use the functionality of the device.
469
Mark Brown89b40122008-10-10 15:58:10 +0100[diff] [blame]470config MFD_WM8350
Mark Brownecf926b2010-01-05 20:40:47 +0000[diff] [blame]471 bool
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]472 depends on GENERIC_HARDIRQS
Mark Brown89b40122008-10-10 15:58:10 +0100[diff] [blame]473
474config MFD_WM8350_CONFIG_MODE_0
475 bool
476 depends on MFD_WM8350
477
478config MFD_WM8350_CONFIG_MODE_1
479 bool
480 depends on MFD_WM8350
481
482config MFD_WM8350_CONFIG_MODE_2
483 bool
484 depends on MFD_WM8350
485
486config MFD_WM8350_CONFIG_MODE_3
487 bool
488 depends on MFD_WM8350
489
Mark Brownca23f8c2008-12-18 23:12:28 +0100[diff] [blame]490config MFD_WM8351_CONFIG_MODE_0
491 bool
492 depends on MFD_WM8350
493
494config MFD_WM8351_CONFIG_MODE_1
495 bool
496 depends on MFD_WM8350
497
498config MFD_WM8351_CONFIG_MODE_2
499 bool
500 depends on MFD_WM8350
501
502config MFD_WM8351_CONFIG_MODE_3
503 bool
504 depends on MFD_WM8350
505
Mark Brown96920632008-12-18 23:09:50 +0100[diff] [blame]506config MFD_WM8352_CONFIG_MODE_0
507 bool
508 depends on MFD_WM8350
509
510config MFD_WM8352_CONFIG_MODE_1
511 bool
512 depends on MFD_WM8350
513
514config MFD_WM8352_CONFIG_MODE_2
515 bool
516 depends on MFD_WM8350
517
518config MFD_WM8352_CONFIG_MODE_3
519 bool
520 depends on MFD_WM8350
521
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]522config MFD_WM8350_I2C
Mark Brownecf926b2010-01-05 20:40:47 +0000[diff] [blame]523 bool "Support Wolfson Microelectronics WM8350 with I2C"
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]524 select MFD_WM8350
Geert Uytterhoeven8d002bd2009-12-15 21:49:57 +0100[diff] [blame]525 depends on I2C=y && GENERIC_HARDIRQS
Mark Brownc661a0b2008-10-10 15:58:11 +0100[diff] [blame]526 help
527 The WM8350 is an integrated audio and power management
528 subsystem with watchdog and RTC functionality for embedded
529 systems. This option enables core support for the WM8350 with
530 I2C as the control interface. Additional options must be
531 selected to enable support for the functionality of the chip.
532
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]533config MFD_WM8994
Mark Brownc9fbf7e2010-03-26 16:49:15 +0000[diff] [blame]534 bool "Support Wolfson Microelectronics WM8994"
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]535 select MFD_CORE
Mark Brownd6c645fc2011-06-17 13:02:27 +0100[diff] [blame]536 select REGMAP_I2C
Mark Brown8ab30692011-10-25 10:19:04 +0200[diff] [blame]537 select REGMAP_IRQ
Mark Brownc9fbf7e2010-03-26 16:49:15 +0000[diff] [blame]538 depends on I2C=y && GENERIC_HARDIRQS
Mark Brown9e501082010-01-29 18:20:29 +0000[diff] [blame]539 help
540 The WM8994 is a highly integrated hi-fi CODEC designed for
541 smartphone applicatiosn. As well as audio functionality it
542 has on board GPIO and regulator functionality which is
543 supported via the relevant subsystems. This driver provides
544 core support for the WM8994, in order to use the actual
545 functionaltiy of the device other drivers must be enabled.
546
Balaji Raof52046b2009-01-09 01:49:01 +0100[diff] [blame]547config MFD_PCF50633
548 tristate "Support for NXP PCF50633"
549 depends on I2C
Mark Brown6e3ad112011-08-08 17:04:40 +0900[diff] [blame]550 select REGMAP_I2C
Balaji Raof52046b2009-01-09 01:49:01 +0100[diff] [blame]551 help
552 Say yes here if you have NXP PCF50633 chip on your board.
553 This core driver provides register access and IRQ handling
554 facilities, and registers devices for the various functions
555 so that function-specific drivers can bind to them.
556
Axel Lin13051342011-04-15 20:06:37 +0800[diff] [blame]557config PCF50633_ADC
558 tristate "Support for NXP PCF50633 ADC"
559 depends on MFD_PCF50633
560 help
561 Say yes here if you want to include support for ADC in the
562 NXP PCF50633 chip.
563
564config PCF50633_GPIO
565 tristate "Support for NXP PCF50633 GPIO"
566 depends on MFD_PCF50633
567 help
568 Say yes here if you want to include support GPIO for pins on
569 the PCF50633 chip.
570
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]571config MFD_MC13783
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]572 tristate
573
574config MFD_MC13XXX
575 tristate "Support Freescale MC13783 and MC13892"
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]576 depends on SPI_MASTER
577 select MFD_CORE
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]578 select MFD_MC13783
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]579 help
Uwe Kleine-König8e005932010-09-28 16:37:20 +0200[diff] [blame]580 Support for the Freescale (Atlas) PMIC and audio CODECs
581 MC13783 and MC13892.
Sascha Hauer8238add2009-08-19 01:40:28 +0200[diff] [blame]582 This driver provides common support for accessing the device,
583 additional drivers must be enabled in order to use the
584 functionality of the device.
585
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]586config ABX500_CORE
587 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
Mattias Wallin47c16972010-09-10 17:47:56 +0200[diff] [blame]588 default y if ARCH_U300 || ARCH_U8500
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]589 help
590 Say yes here if you have the ABX500 Mixed Signal IC family
591 chips. This core driver expose register access functions.
592 Functionality specific drivers using these functions can
593 remain unchanged when IC changes. Binding of the functions to
594 actual register access is done by the IC core driver.
595
Linus Walleij14fa5692009-05-21 23:17:06 +0200[diff] [blame]596config AB3100_CORE
Linus Walleij2071db42010-01-19 11:41:52 +0100[diff] [blame]597 bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
Mattias Wallinfa661252010-05-01 18:26:20 +0200[diff] [blame]598 depends on I2C=y && ABX500_CORE
Linus Walleij8c96aef2010-08-20 10:27:12 +0200[diff] [blame]599 select MFD_CORE
Linus Walleij14fa5692009-05-21 23:17:06 +0200[diff] [blame]600 default y if ARCH_U300
601 help
602 Select this to enable the AB3100 Mixed Signal IC core
603 functionality. This connects to a AB3100 on the I2C bus
604 and expose a number of symbols needed for dependent devices
605 to read and write registers and subscribe to events from
606 this multi-functional IC. This is needed to use other features
607 of the AB3100 such as battery-backed RTC, charging control,
608 LEDs, vibrator, system power and temperature, power management
609 and ALSA sound.
610
Linus Walleij12992dd2009-08-18 22:52:26 +0200[diff] [blame]611config AB3100_OTP
612 tristate "ST-Ericsson AB3100 OTP functions"
613 depends on AB3100_CORE
614 default y if AB3100_CORE
615 help
616 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
617 programmable memory) support. This exposes a sysfs file to read
618 out OTP values.
619
Daniel Ribeiro13a09f92009-05-28 15:43:37 -0300[diff] [blame]620config EZX_PCAP
621 bool "PCAP Support"
622 depends on GENERIC_HARDIRQS && SPI_MASTER
623 help
624 This enables the PCAP ASIC present on EZX Phones. This is
625 needed for MMC, TouchScreen, Sound, USB, etc..
626
Mattias Wallin3d5e2ca2011-09-22 08:22:18 +0200[diff] [blame]627config AB5500_CORE
628 bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
629 depends on ABX500_CORE && MFD_DB5500_PRCMU
630 select MFD_CORE
631 help
632 Select this option to enable access to AB5500 power management
633 chip. This connects to the db5500 chip via the I2C bus via PRCMU.
634 This chip embeds various other multimedia funtionalities as well.
635
Linus Walleij94be70d2011-09-22 08:22:33 +0200[diff] [blame]636config AB5500_DEBUG
637 bool "Enable debug info via debugfs"
638 depends on AB5500_CORE && DEBUG_FS
639 default y if DEBUG_FS
640 help
641 Select this option if you want debug information from the AB5500
642 using the debug filesystem, debugfs.
643
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]644config AB8500_CORE
645 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
Sundar Iyer6680d942010-12-24 11:52:08 +0100[diff] [blame]646 depends on GENERIC_HARDIRQS && ABX500_CORE
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]647 select MFD_CORE
Srinidhi Kasagar0c418392009-10-12 17:11:52 +0200[diff] [blame]648 help
Rabin Vincent62579262010-05-19 11:39:02 +0200[diff] [blame]649 Select this option to enable access to AB8500 power management
Sundar Iyer6680d942010-12-24 11:52:08 +0100[diff] [blame]650 chip. This connects to U8500 either on the SSP/SPI bus (deprecated
651 since hardware version v1.0) or the I2C bus via PRCMU. It also adds
652 the irq_chip parts for handling the Mixed Signal chip events.
Srinidhi Kasagar0c418392009-10-12 17:11:52 +0200[diff] [blame]653 This chip embeds various other multimedia funtionalities as well.
654
Mattias Wallin39368ed2010-09-15 13:12:03 +0200[diff] [blame]655config AB8500_I2C_CORE
656 bool "AB8500 register access via PRCMU I2C"
Linus Walleij650c2a22011-05-15 22:53:56 +0200[diff] [blame]657 depends on AB8500_CORE && MFD_DB8500_PRCMU
Mattias Wallin39368ed2010-09-15 13:12:03 +0200[diff] [blame]658 default y
659 help
660 This enables register access to the AB8500 chip via PRCMU I2C.
661 The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
662 the I2C bus is connected to the Power Reset
663 and Mangagement Unit, PRCMU.
664
Mattias Wallin5814fc32010-09-13 16:05:04 +0200[diff] [blame]665config AB8500_DEBUG
666 bool "Enable debug info via debugfs"
667 depends on AB8500_CORE && DEBUG_FS
668 default y if DEBUG_FS
669 help
670 Select this option if you want debug information using the debug
671 filesystem, debugfs.
672
Arun Murthydae2db32011-02-22 10:11:13 +0100[diff] [blame]673config AB8500_GPADC
674 bool "AB8500 GPADC driver"
675 depends on AB8500_CORE && REGULATOR_AB8500
676 default y
677 help
678 AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
679
Linus Walleij650c2a22011-05-15 22:53:56 +0200[diff] [blame]680config MFD_DB8500_PRCMU
681 bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
682 depends on UX500_SOC_DB8500
683 select MFD_CORE
684 help
685 Select this option to enable support for the DB8500 Power Reset
686 and Control Management Unit. This is basically an autonomous
687 system controller running an XP70 microprocessor, which is accessed
688 through a register map.
689
Linus Walleij83177972011-05-03 18:14:48 +0200[diff] [blame]690config MFD_DB5500_PRCMU
691 bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
692 depends on UX500_SOC_DB5500
693 select MFD_CORE
694 help
695 Select this option to enable support for the DB5500 Power Reset
696 and Control Management Unit. This is basically an autonomous
697 system controller running an XP70 microprocessor, which is accessed
698 through a register map.
699
Andres Salomonf71e1af2010-11-26 11:52:35 +0100[diff] [blame]700config MFD_CS5535
701 tristate "Support for CS5535 and CS5536 southbridge core functions"
702 select MFD_CORE
Andres Salomon15b7cf12011-03-27 21:26:03 -0700[diff] [blame]703 depends on PCI && X86
Andres Salomonf71e1af2010-11-26 11:52:35 +0100[diff] [blame]704 ---help---
705 This is the core driver for CS5535/CS5536 MFD functions. This is
706 necessary for using the board's GPIO and MFGPT functionality.
707
Richard Röjfors8edbede2010-02-04 08:18:52 -0300[diff] [blame]708config MFD_TIMBERDALE
709 tristate "Support for the Timberdale FPGA"
710 select MFD_CORE
Randy Dunlap546e29b62010-02-12 12:30:55 -0300[diff] [blame]711 depends on PCI && GPIOLIB
Richard Röjfors8edbede2010-02-04 08:18:52 -0300[diff] [blame]712 ---help---
713 This is the core driver for the timberdale FPGA. This device is a
714 multifunction device which exposes numerous platform devices.
715
716 The timberdale FPGA can be found on the Intel Atom development board
717 for in-vehicle infontainment, called Russellville.
Denis Turischeve82c60a2010-02-19 11:26:25 +0100[diff] [blame]718
719config LPC_SCH
720 tristate "Intel SCH LPC"
721 depends on PCI
722 select MFD_CORE
723 help
724 LPC bridge function of the Intel SCH provides support for
725 System Management Bus and General Purpose I/O.
726
Florian Fainellie090d502010-03-21 01:06:05 +0100[diff] [blame]727config MFD_RDC321X
728 tristate "Support for RDC-R321x southbridge"
729 select MFD_CORE
730 depends on PCI
731 help
732 Say yes here if you want to have support for the RDC R-321x SoC
733 southbridge which provides access to GPIOs and Watchdog using the
734 southbridge PCI device configuration space.
735
Ira W. Snyderbd358132010-04-07 09:43:00 +0200[diff] [blame]736config MFD_JANZ_CMODIO
737 tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
738 select MFD_CORE
739 depends on PCI
740 help
741 This is the core driver for the Janz CMOD-IO PCI MODULbus
742 carrier board. This device is a PCI to MODULbus bridge which may
743 host many different types of MODULbus daughterboards, including
744 CAN and GPIO controllers.
745
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]746config MFD_JZ4740_ADC
Lars-Peter Clausen914e6d42011-06-03 03:14:26 +0200[diff] [blame]747 bool "Support for the JZ4740 SoC ADC core"
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]748 select MFD_CORE
Lars-Peter Clausen914e6d42011-06-03 03:14:26 +0200[diff] [blame]749 select GENERIC_IRQ_CHIP
Lars-Peter Clausen91f4deb2010-07-12 03:48:08 +0200[diff] [blame]750 depends on MACH_JZ4740
751 help
752 Say yes here if you want support for the ADC unit in the JZ4740 SoC.
753 This driver is necessary for jz4740-battery and jz4740-hwmon driver.
754
Daniel Drake375fc772010-09-30 21:55:41 +0100[diff] [blame]755config MFD_VX855
756 tristate "Support for VIA VX855/VX875 integrated south bridge"
757 depends on PCI
758 select MFD_CORE
759 help
760 Say yes here to enable support for various functions of the
761 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
762 and/or vx855_gpio drivers for this to do anything useful.
763
Matti Aaltonen383268a2010-12-10 11:41:33 -0300[diff] [blame]764config MFD_WL1273_CORE
Matti Aaltonen94fd5b72011-03-01 10:10:35 -0300[diff] [blame]765 tristate "Support for TI WL1273 FM radio."
Matti Aaltonen383268a2010-12-10 11:41:33 -0300[diff] [blame]766 depends on I2C
767 select MFD_CORE
768 default n
769 help
770 This is the core driver for the TI WL1273 FM radio. This MFD
771 driver connects the radio-wl1273 V4L2 module and the wl1273
772 audio codec.
773
Keshava Munegowda17cdd292011-03-01 20:08:17 +0530[diff] [blame]774config MFD_OMAP_USB_HOST
775 bool "Support OMAP USBHS core driver"
776 depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
777 default y
778 help
779 This is the core driver for the OAMP EHCI and OHCI drivers.
780 This MFD driver does the required setup functionalities for
781 OMAP USB Host drivers.
782
Abhijeet Dharmapurikarcbdb53e2011-04-05 14:40:52 -0700[diff] [blame]783config MFD_PM8XXX
784 tristate
785
786config MFD_PM8921_CORE
787 tristate "Qualcomm PM8921 PMIC chip"
788 depends on MSM_SSBI
789 select MFD_CORE
790 select MFD_PM8XXX
791 help
792 If you say yes to this option, support will be included for the
793 built-in PM8921 PMIC chip.
794
795 This is required if your board has a PM8921 and uses its features,
796 such as: MPPs, GPIOs, regulators, interrupts, and PWM.
797
798 Say M here if you want to include support for PM8921 chip as a module.
799 This will build a module called "pm8921-core".
800
Abhijeet Dharmapurikarc013f0a2011-04-05 14:40:53 -0700[diff] [blame]801config MFD_PM8XXX_IRQ
802 bool "Support for Qualcomm PM8xxx IRQ features"
803 depends on MFD_PM8XXX
804 default y if MFD_PM8XXX
805 help
806 This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
807
808 This is required to use certain other PM 8xxx features, such as GPIO
809 and MPP.
810
Axel Lin8509e142011-06-23 10:15:51 +0800[diff] [blame]811config TPS65911_COMPARATOR
812 tristate
813
Jin Park09d62922011-07-04 19:48:12 +0200[diff] [blame]814config MFD_AAT2870_CORE
815 bool "Support for the AnalogicTech AAT2870"
816 select MFD_CORE
817 depends on I2C=y && GPIOLIB
818 help
819 If you say yes here you get support for the AAT2870.
820 This driver provides common support for accessing the device,
821 additional drivers must be enabled in order to use the
822 functionality of the device.
823
Mika Westerberg1f5a3712011-09-21 13:03:07 +0200[diff] [blame]824config MFD_INTEL_MSIC
825 bool "Support for Intel MSIC"
826 depends on INTEL_SCU_IPC
827 select MFD_CORE
828 help
829 Select this option to enable access to Intel MSIC (Avatele
830 Passage) chip. This chip embeds audio, battery, GPIO, etc.
831 devices used in Intel Medfield platforms.
832
Arnd Bergmann8a0a8e82011-09-02 16:43:36 +0200[diff] [blame]833endmenu
834endif
Ben Dooksb6d64542007-02-20 13:58:01 -0800[diff] [blame]835
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]836menu "Multimedia Capabilities Port drivers"
Adrian Bunkf751d502006-03-24 03:18:21 -0800[diff] [blame]837 depends on ARCH_SA1100
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]838
839config MCP
840 tristate
841
Russell King5e742ad2005-08-18 10:08:15 +0100[diff] [blame]842# Interface drivers
843config MCP_SA11X0
844 tristate "Support SA11x0 MCP interface"
845 depends on ARCH_SA1100
846 select MCP
847
Russell King05c45ca2005-09-11 10:26:31 +0100[diff] [blame]848# Chip drivers
849config MCP_UCB1200
850 tristate "Support for UCB1200 / UCB1300"
851 depends on MCP
852
Russell Kingacb45432005-09-11 10:26:57 +0100[diff] [blame]853config MCP_UCB1200_TS
854 tristate "Touchscreen interface support"
855 depends on MCP_UCB1200 && INPUT
856
Russell Kinga4e137a2005-08-18 10:06:59 +0100[diff] [blame]857endmenu