Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * linux/drivers/ide/pci/aec62xx.c Version 0.11 March 27, 2002 |
| 3 | * |
| 4 | * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> |
| 5 | * |
| 6 | */ |
| 7 | |
| 8 | #include <linux/module.h> |
| 9 | #include <linux/config.h> |
| 10 | #include <linux/types.h> |
| 11 | #include <linux/pci.h> |
| 12 | #include <linux/delay.h> |
| 13 | #include <linux/hdreg.h> |
| 14 | #include <linux/ide.h> |
| 15 | #include <linux/init.h> |
| 16 | |
| 17 | #include <asm/io.h> |
| 18 | |
| 19 | struct chipset_bus_clock_list_entry { |
| 20 | u8 xfer_speed; |
| 21 | u8 chipset_settings; |
| 22 | u8 ultra_settings; |
| 23 | }; |
| 24 | |
| 25 | static struct chipset_bus_clock_list_entry aec6xxx_33_base [] = { |
| 26 | { XFER_UDMA_6, 0x31, 0x07 }, |
| 27 | { XFER_UDMA_5, 0x31, 0x06 }, |
| 28 | { XFER_UDMA_4, 0x31, 0x05 }, |
| 29 | { XFER_UDMA_3, 0x31, 0x04 }, |
| 30 | { XFER_UDMA_2, 0x31, 0x03 }, |
| 31 | { XFER_UDMA_1, 0x31, 0x02 }, |
| 32 | { XFER_UDMA_0, 0x31, 0x01 }, |
| 33 | |
| 34 | { XFER_MW_DMA_2, 0x31, 0x00 }, |
| 35 | { XFER_MW_DMA_1, 0x31, 0x00 }, |
| 36 | { XFER_MW_DMA_0, 0x0a, 0x00 }, |
| 37 | { XFER_PIO_4, 0x31, 0x00 }, |
| 38 | { XFER_PIO_3, 0x33, 0x00 }, |
| 39 | { XFER_PIO_2, 0x08, 0x00 }, |
| 40 | { XFER_PIO_1, 0x0a, 0x00 }, |
| 41 | { XFER_PIO_0, 0x00, 0x00 }, |
| 42 | { 0, 0x00, 0x00 } |
| 43 | }; |
| 44 | |
| 45 | static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { |
| 46 | { XFER_UDMA_6, 0x41, 0x06 }, |
| 47 | { XFER_UDMA_5, 0x41, 0x05 }, |
| 48 | { XFER_UDMA_4, 0x41, 0x04 }, |
| 49 | { XFER_UDMA_3, 0x41, 0x03 }, |
| 50 | { XFER_UDMA_2, 0x41, 0x02 }, |
| 51 | { XFER_UDMA_1, 0x41, 0x01 }, |
| 52 | { XFER_UDMA_0, 0x41, 0x01 }, |
| 53 | |
| 54 | { XFER_MW_DMA_2, 0x41, 0x00 }, |
| 55 | { XFER_MW_DMA_1, 0x42, 0x00 }, |
| 56 | { XFER_MW_DMA_0, 0x7a, 0x00 }, |
| 57 | { XFER_PIO_4, 0x41, 0x00 }, |
| 58 | { XFER_PIO_3, 0x43, 0x00 }, |
| 59 | { XFER_PIO_2, 0x78, 0x00 }, |
| 60 | { XFER_PIO_1, 0x7a, 0x00 }, |
| 61 | { XFER_PIO_0, 0x70, 0x00 }, |
| 62 | { 0, 0x00, 0x00 } |
| 63 | }; |
| 64 | |
| 65 | #define BUSCLOCK(D) \ |
| 66 | ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D))) |
| 67 | |
| 68 | #if 0 |
| 69 | if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { |
| 70 | (void) pci_read_config_byte(dev, 0x54, &art); |
| 71 | p += sprintf(p, "DMA Mode: %s(%s)", |
| 72 | (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO", |
| 73 | (art&0x02)?"2":(art&0x01)?"1":"0"); |
| 74 | p += sprintf(p, " %s(%s)", |
| 75 | (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO", |
| 76 | (art&0x08)?"2":(art&0x04)?"1":"0"); |
| 77 | p += sprintf(p, " %s(%s)", |
| 78 | (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO", |
| 79 | (art&0x20)?"2":(art&0x10)?"1":"0"); |
| 80 | p += sprintf(p, " %s(%s)\n", |
| 81 | (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO", |
| 82 | (art&0x80)?"2":(art&0x40)?"1":"0"); |
| 83 | } else { |
| 84 | #endif |
| 85 | |
| 86 | /* |
| 87 | * TO DO: active tuning and correction of cards without a bios. |
| 88 | */ |
| 89 | static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) |
| 90 | { |
| 91 | for ( ; chipset_table->xfer_speed ; chipset_table++) |
| 92 | if (chipset_table->xfer_speed == speed) { |
| 93 | return chipset_table->chipset_settings; |
| 94 | } |
| 95 | return chipset_table->chipset_settings; |
| 96 | } |
| 97 | |
| 98 | static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) |
| 99 | { |
| 100 | for ( ; chipset_table->xfer_speed ; chipset_table++) |
| 101 | if (chipset_table->xfer_speed == speed) { |
| 102 | return chipset_table->ultra_settings; |
| 103 | } |
| 104 | return chipset_table->ultra_settings; |
| 105 | } |
| 106 | |
| 107 | static u8 aec62xx_ratemask (ide_drive_t *drive) |
| 108 | { |
| 109 | ide_hwif_t *hwif = HWIF(drive); |
| 110 | u8 mode; |
| 111 | |
| 112 | switch(hwif->pci_dev->device) { |
| 113 | case PCI_DEVICE_ID_ARTOP_ATP865: |
| 114 | case PCI_DEVICE_ID_ARTOP_ATP865R: |
| 115 | #if 0 |
| 116 | mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3; |
| 117 | #else |
| 118 | mode = (hwif->INB(((hwif->channel) ? |
| 119 | hwif->mate->dma_status : |
| 120 | hwif->dma_status)) & 0x10) ? 4 : 3; |
| 121 | #endif |
| 122 | break; |
| 123 | case PCI_DEVICE_ID_ARTOP_ATP860: |
| 124 | case PCI_DEVICE_ID_ARTOP_ATP860R: |
| 125 | mode = 2; |
| 126 | break; |
| 127 | case PCI_DEVICE_ID_ARTOP_ATP850UF: |
| 128 | default: |
| 129 | return 1; |
| 130 | } |
| 131 | |
| 132 | if (!eighty_ninty_three(drive)) |
| 133 | mode = min(mode, (u8)1); |
| 134 | return mode; |
| 135 | } |
| 136 | |
| 137 | static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
| 138 | { |
| 139 | ide_hwif_t *hwif = HWIF(drive); |
| 140 | struct pci_dev *dev = hwif->pci_dev; |
| 141 | u16 d_conf = 0; |
| 142 | u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); |
| 143 | u8 ultra = 0, ultra_conf = 0; |
| 144 | u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; |
| 145 | unsigned long flags; |
| 146 | |
| 147 | local_irq_save(flags); |
| 148 | /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */ |
| 149 | pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf); |
| 150 | tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev)); |
| 151 | d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf); |
| 152 | pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf); |
| 153 | |
| 154 | tmp1 = 0x00; |
| 155 | tmp2 = 0x00; |
| 156 | pci_read_config_byte(dev, 0x54, &ultra); |
| 157 | tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn)))); |
| 158 | ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev)); |
| 159 | tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn)))); |
| 160 | pci_write_config_byte(dev, 0x54, tmp2); |
| 161 | local_irq_restore(flags); |
| 162 | return(ide_config_drive_speed(drive, speed)); |
| 163 | } |
| 164 | |
| 165 | static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed) |
| 166 | { |
| 167 | ide_hwif_t *hwif = HWIF(drive); |
| 168 | struct pci_dev *dev = hwif->pci_dev; |
| 169 | u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed); |
| 170 | u8 unit = (drive->select.b.unit & 0x01); |
| 171 | u8 tmp1 = 0, tmp2 = 0; |
| 172 | u8 ultra = 0, drive_conf = 0, ultra_conf = 0; |
| 173 | unsigned long flags; |
| 174 | |
| 175 | local_irq_save(flags); |
| 176 | /* high 4-bits: Active, low 4-bits: Recovery */ |
| 177 | pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf); |
| 178 | drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev)); |
| 179 | pci_write_config_byte(dev, 0x40|drive->dn, drive_conf); |
| 180 | |
| 181 | pci_read_config_byte(dev, (0x44|hwif->channel), &ultra); |
| 182 | tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit)))); |
| 183 | ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev)); |
| 184 | tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit)))); |
| 185 | pci_write_config_byte(dev, (0x44|hwif->channel), tmp2); |
| 186 | local_irq_restore(flags); |
| 187 | return(ide_config_drive_speed(drive, speed)); |
| 188 | } |
| 189 | |
| 190 | static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed) |
| 191 | { |
| 192 | switch (HWIF(drive)->pci_dev->device) { |
| 193 | case PCI_DEVICE_ID_ARTOP_ATP865: |
| 194 | case PCI_DEVICE_ID_ARTOP_ATP865R: |
| 195 | case PCI_DEVICE_ID_ARTOP_ATP860: |
| 196 | case PCI_DEVICE_ID_ARTOP_ATP860R: |
| 197 | return ((int) aec6260_tune_chipset(drive, speed)); |
| 198 | case PCI_DEVICE_ID_ARTOP_ATP850UF: |
| 199 | return ((int) aec6210_tune_chipset(drive, speed)); |
| 200 | default: |
| 201 | return -1; |
| 202 | } |
| 203 | } |
| 204 | |
| 205 | static int config_chipset_for_dma (ide_drive_t *drive) |
| 206 | { |
| 207 | u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive)); |
| 208 | |
| 209 | if (!(speed)) |
| 210 | return 0; |
| 211 | |
| 212 | (void) aec62xx_tune_chipset(drive, speed); |
| 213 | return ide_dma_enable(drive); |
| 214 | } |
| 215 | |
| 216 | static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio) |
| 217 | { |
| 218 | u8 speed = 0; |
| 219 | u8 new_pio = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL); |
| 220 | |
| 221 | switch(pio) { |
| 222 | case 5: speed = new_pio; break; |
| 223 | case 4: speed = XFER_PIO_4; break; |
| 224 | case 3: speed = XFER_PIO_3; break; |
| 225 | case 2: speed = XFER_PIO_2; break; |
| 226 | case 1: speed = XFER_PIO_1; break; |
| 227 | default: speed = XFER_PIO_0; break; |
| 228 | } |
| 229 | (void) aec62xx_tune_chipset(drive, speed); |
| 230 | } |
| 231 | |
| 232 | static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive) |
| 233 | { |
| 234 | ide_hwif_t *hwif = HWIF(drive); |
| 235 | struct hd_driveid *id = drive->id; |
| 236 | |
| 237 | if ((id->capability & 1) && drive->autodma) { |
| 238 | |
| 239 | if (ide_use_dma(drive)) { |
| 240 | if (config_chipset_for_dma(drive)) |
| 241 | return hwif->ide_dma_on(drive); |
| 242 | } |
| 243 | |
| 244 | goto fast_ata_pio; |
| 245 | |
| 246 | } else if ((id->capability & 8) || (id->field_valid & 2)) { |
| 247 | fast_ata_pio: |
| 248 | aec62xx_tune_drive(drive, 5); |
| 249 | return hwif->ide_dma_off_quietly(drive); |
| 250 | } |
| 251 | /* IORDY not supported */ |
| 252 | return 0; |
| 253 | } |
| 254 | |
| 255 | static int aec62xx_irq_timeout (ide_drive_t *drive) |
| 256 | { |
| 257 | ide_hwif_t *hwif = HWIF(drive); |
| 258 | struct pci_dev *dev = hwif->pci_dev; |
| 259 | |
| 260 | switch(dev->device) { |
| 261 | case PCI_DEVICE_ID_ARTOP_ATP860: |
| 262 | case PCI_DEVICE_ID_ARTOP_ATP860R: |
| 263 | case PCI_DEVICE_ID_ARTOP_ATP865: |
| 264 | case PCI_DEVICE_ID_ARTOP_ATP865R: |
| 265 | printk(" AEC62XX time out "); |
| 266 | #if 0 |
| 267 | { |
| 268 | int i = 0; |
| 269 | u8 reg49h = 0; |
| 270 | pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, ®49h); |
| 271 | for (i=0;i<256;i++) |
| 272 | pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10); |
| 273 | pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10); |
| 274 | } |
| 275 | return 0; |
| 276 | #endif |
| 277 | default: |
| 278 | break; |
| 279 | } |
| 280 | #if 0 |
| 281 | { |
| 282 | ide_hwif_t *hwif = HWIF(drive); |
| 283 | struct pci_dev *dev = hwif->pci_dev; |
| 284 | u8 tmp1 = 0, tmp2 = 0, mode6 = 0; |
| 285 | |
| 286 | pci_read_config_byte(dev, 0x44, &tmp1); |
| 287 | pci_read_config_byte(dev, 0x45, &tmp2); |
| 288 | printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2); |
| 289 | mode6 = HWIF(drive)->INB(((hwif->channel) ? |
| 290 | hwif->mate->dma_status : |
| 291 | hwif->dma_status)); |
| 292 | printk(" AEC6280 133=%x ", (mode6 & 0x10)); |
| 293 | } |
| 294 | #endif |
| 295 | return 0; |
| 296 | } |
| 297 | |
| 298 | static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) |
| 299 | { |
| 300 | int bus_speed = system_bus_clock(); |
| 301 | |
| 302 | if (dev->resource[PCI_ROM_RESOURCE].start) { |
| 303 | pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); |
| 304 | printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start); |
| 305 | } |
| 306 | |
| 307 | if (bus_speed <= 33) |
| 308 | pci_set_drvdata(dev, (void *) aec6xxx_33_base); |
| 309 | else |
| 310 | pci_set_drvdata(dev, (void *) aec6xxx_34_base); |
| 311 | |
| 312 | return dev->irq; |
| 313 | } |
| 314 | |
| 315 | static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) |
| 316 | { |
| 317 | hwif->autodma = 0; |
| 318 | hwif->tuneproc = &aec62xx_tune_drive; |
| 319 | hwif->speedproc = &aec62xx_tune_chipset; |
| 320 | |
| 321 | if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { |
| 322 | hwif->serialized = hwif->channel; |
| 323 | hwif->no_dsc = 1; |
| 324 | } |
| 325 | |
| 326 | if (hwif->mate) |
| 327 | hwif->mate->serialized = hwif->serialized; |
| 328 | |
| 329 | if (!hwif->dma_base) { |
| 330 | hwif->drives[0].autotune = 1; |
| 331 | hwif->drives[1].autotune = 1; |
| 332 | return; |
| 333 | } |
| 334 | |
| 335 | hwif->ultra_mask = 0x7f; |
| 336 | hwif->mwdma_mask = 0x07; |
| 337 | hwif->swdma_mask = 0x07; |
| 338 | |
| 339 | hwif->ide_dma_check = &aec62xx_config_drive_xfer_rate; |
| 340 | hwif->ide_dma_lostirq = &aec62xx_irq_timeout; |
| 341 | hwif->ide_dma_timeout = &aec62xx_irq_timeout; |
| 342 | if (!noautodma) |
| 343 | hwif->autodma = 1; |
| 344 | hwif->drives[0].autodma = hwif->autodma; |
| 345 | hwif->drives[1].autodma = hwif->autodma; |
| 346 | } |
| 347 | |
| 348 | static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase) |
| 349 | { |
| 350 | struct pci_dev *dev = hwif->pci_dev; |
| 351 | |
| 352 | if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { |
| 353 | u8 reg54h = 0; |
| 354 | unsigned long flags; |
| 355 | |
| 356 | spin_lock_irqsave(&ide_lock, flags); |
| 357 | pci_read_config_byte(dev, 0x54, ®54h); |
| 358 | pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ? 0xF0 : 0x0F)); |
| 359 | spin_unlock_irqrestore(&ide_lock, flags); |
| 360 | } else { |
| 361 | u8 ata66 = 0; |
| 362 | pci_read_config_byte(hwif->pci_dev, 0x49, &ata66); |
| 363 | if (!(hwif->udma_four)) |
| 364 | hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1; |
| 365 | } |
| 366 | |
| 367 | ide_setup_dma(hwif, dmabase, 8); |
| 368 | } |
| 369 | |
| 370 | static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d) |
| 371 | { |
| 372 | return ide_setup_pci_device(dev, d); |
| 373 | } |
| 374 | |
| 375 | static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d) |
| 376 | { |
| 377 | unsigned long bar4reg = pci_resource_start(dev, 4); |
| 378 | |
| 379 | if (inb(bar4reg+2) & 0x10) { |
| 380 | strcpy(d->name, "AEC6880"); |
| 381 | if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) |
| 382 | strcpy(d->name, "AEC6880R"); |
| 383 | } else { |
| 384 | strcpy(d->name, "AEC6280"); |
| 385 | if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) |
| 386 | strcpy(d->name, "AEC6280R"); |
| 387 | } |
| 388 | |
| 389 | return ide_setup_pci_device(dev, d); |
| 390 | } |
| 391 | |
| 392 | static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { |
| 393 | { /* 0 */ |
| 394 | .name = "AEC6210", |
| 395 | .init_setup = init_setup_aec62xx, |
| 396 | .init_chipset = init_chipset_aec62xx, |
| 397 | .init_hwif = init_hwif_aec62xx, |
| 398 | .init_dma = init_dma_aec62xx, |
| 399 | .channels = 2, |
| 400 | .autodma = AUTODMA, |
| 401 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
| 402 | .bootable = OFF_BOARD, |
| 403 | },{ /* 1 */ |
| 404 | .name = "AEC6260", |
| 405 | .init_setup = init_setup_aec62xx, |
| 406 | .init_chipset = init_chipset_aec62xx, |
| 407 | .init_hwif = init_hwif_aec62xx, |
| 408 | .init_dma = init_dma_aec62xx, |
| 409 | .channels = 2, |
| 410 | .autodma = NOAUTODMA, |
| 411 | .bootable = OFF_BOARD, |
| 412 | },{ /* 2 */ |
| 413 | .name = "AEC6260R", |
| 414 | .init_setup = init_setup_aec62xx, |
| 415 | .init_chipset = init_chipset_aec62xx, |
| 416 | .init_hwif = init_hwif_aec62xx, |
| 417 | .init_dma = init_dma_aec62xx, |
| 418 | .channels = 2, |
| 419 | .autodma = AUTODMA, |
| 420 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
| 421 | .bootable = NEVER_BOARD, |
| 422 | },{ /* 3 */ |
| 423 | .name = "AEC6X80", |
| 424 | .init_setup = init_setup_aec6x80, |
| 425 | .init_chipset = init_chipset_aec62xx, |
| 426 | .init_hwif = init_hwif_aec62xx, |
| 427 | .init_dma = init_dma_aec62xx, |
| 428 | .channels = 2, |
| 429 | .autodma = AUTODMA, |
| 430 | .bootable = OFF_BOARD, |
| 431 | },{ /* 4 */ |
| 432 | .name = "AEC6X80R", |
| 433 | .init_setup = init_setup_aec6x80, |
| 434 | .init_chipset = init_chipset_aec62xx, |
| 435 | .init_hwif = init_hwif_aec62xx, |
| 436 | .init_dma = init_dma_aec62xx, |
| 437 | .channels = 2, |
| 438 | .autodma = AUTODMA, |
| 439 | .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, |
| 440 | .bootable = OFF_BOARD, |
| 441 | } |
| 442 | }; |
| 443 | |
| 444 | /** |
| 445 | * aec62xx_init_one - called when a AEC is found |
| 446 | * @dev: the aec62xx device |
| 447 | * @id: the matching pci id |
| 448 | * |
| 449 | * Called when the PCI registration layer (or the IDE initialization) |
| 450 | * finds a device matching our IDE device tables. |
| 451 | */ |
| 452 | |
| 453 | static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
| 454 | { |
| 455 | ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data]; |
| 456 | |
| 457 | return d->init_setup(dev, d); |
| 458 | } |
| 459 | |
| 460 | static struct pci_device_id aec62xx_pci_tbl[] = { |
| 461 | { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, |
| 462 | { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, |
| 463 | { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, |
| 464 | { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, |
| 465 | { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, |
| 466 | { 0, }, |
| 467 | }; |
| 468 | MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl); |
| 469 | |
| 470 | static struct pci_driver driver = { |
| 471 | .name = "AEC62xx_IDE", |
| 472 | .id_table = aec62xx_pci_tbl, |
| 473 | .probe = aec62xx_init_one, |
| 474 | }; |
| 475 | |
| 476 | static int aec62xx_ide_init(void) |
| 477 | { |
| 478 | return ide_pci_register_driver(&driver); |
| 479 | } |
| 480 | |
| 481 | module_init(aec62xx_ide_init); |
| 482 | |
| 483 | MODULE_AUTHOR("Andre Hedrick"); |
| 484 | MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE"); |
| 485 | MODULE_LICENSE("GPL"); |