Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2004-2007 Freescale Semicondutor, Inc. All rights reserved. |
| 3 | * |
| 4 | * Author: Li Yang <leoli@freescale.com> |
| 5 | * Jiang Bo <tanya.jiang@freescale.com> |
| 6 | * |
| 7 | * Description: |
| 8 | * Freescale high-speed USB SOC DR module device controller driver. |
| 9 | * This can be found on MPC8349E/MPC8313E cpus. |
| 10 | * The driver is previously named as mpc_udc. Based on bare board |
| 11 | * code from Dave Liu and Shlomi Gridish. |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify it |
| 14 | * under the terms of the GNU General Public License as published by the |
| 15 | * Free Software Foundation; either version 2 of the License, or (at your |
| 16 | * option) any later version. |
| 17 | */ |
| 18 | |
| 19 | #undef VERBOSE |
| 20 | |
| 21 | #include <linux/module.h> |
| 22 | #include <linux/kernel.h> |
| 23 | #include <linux/ioport.h> |
| 24 | #include <linux/types.h> |
| 25 | #include <linux/errno.h> |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 26 | #include <linux/slab.h> |
| 27 | #include <linux/init.h> |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 28 | #include <linux/list.h> |
| 29 | #include <linux/interrupt.h> |
| 30 | #include <linux/proc_fs.h> |
| 31 | #include <linux/mm.h> |
| 32 | #include <linux/moduleparam.h> |
| 33 | #include <linux/device.h> |
| 34 | #include <linux/usb/ch9.h> |
David Brownell | 9454a57 | 2007-10-04 18:05:17 -0700 | [diff] [blame] | 35 | #include <linux/usb/gadget.h> |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 36 | #include <linux/usb/otg.h> |
| 37 | #include <linux/dma-mapping.h> |
| 38 | #include <linux/platform_device.h> |
| 39 | #include <linux/fsl_devices.h> |
| 40 | #include <linux/dmapool.h> |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 41 | #include <linux/delay.h> |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 42 | |
| 43 | #include <asm/byteorder.h> |
| 44 | #include <asm/io.h> |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 45 | #include <asm/system.h> |
| 46 | #include <asm/unaligned.h> |
| 47 | #include <asm/dma.h> |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 48 | |
| 49 | #include "fsl_usb2_udc.h" |
| 50 | |
| 51 | #define DRIVER_DESC "Freescale High-Speed USB SOC Device Controller driver" |
| 52 | #define DRIVER_AUTHOR "Li Yang/Jiang Bo" |
| 53 | #define DRIVER_VERSION "Apr 20, 2007" |
| 54 | |
| 55 | #define DMA_ADDR_INVALID (~(dma_addr_t)0) |
| 56 | |
| 57 | static const char driver_name[] = "fsl-usb2-udc"; |
| 58 | static const char driver_desc[] = DRIVER_DESC; |
| 59 | |
Will Newton | 7483cff8 | 2008-08-12 15:39:09 +0100 | [diff] [blame] | 60 | static struct usb_dr_device *dr_regs; |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 61 | #ifndef CONFIG_ARCH_MXC |
Will Newton | 7483cff8 | 2008-08-12 15:39:09 +0100 | [diff] [blame] | 62 | static struct usb_sys_interface *usb_sys_regs; |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 63 | #endif |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 64 | |
| 65 | /* it is initialized in probe() */ |
| 66 | static struct fsl_udc *udc_controller = NULL; |
| 67 | |
| 68 | static const struct usb_endpoint_descriptor |
| 69 | fsl_ep0_desc = { |
| 70 | .bLength = USB_DT_ENDPOINT_SIZE, |
| 71 | .bDescriptorType = USB_DT_ENDPOINT, |
| 72 | .bEndpointAddress = 0, |
| 73 | .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| 74 | .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, |
| 75 | }; |
| 76 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 77 | static void fsl_ep_fifo_flush(struct usb_ep *_ep); |
| 78 | |
| 79 | #ifdef CONFIG_PPC32 |
| 80 | #define fsl_readl(addr) in_le32(addr) |
Will Newton | c93eebb | 2008-08-12 15:39:13 +0100 | [diff] [blame] | 81 | #define fsl_writel(val32, addr) out_le32(addr, val32) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 82 | #else |
| 83 | #define fsl_readl(addr) readl(addr) |
Will Newton | c93eebb | 2008-08-12 15:39:13 +0100 | [diff] [blame] | 84 | #define fsl_writel(val32, addr) writel(val32, addr) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 85 | #endif |
| 86 | |
| 87 | /******************************************************************** |
| 88 | * Internal Used Function |
| 89 | ********************************************************************/ |
| 90 | /*----------------------------------------------------------------- |
| 91 | * done() - retire a request; caller blocked irqs |
| 92 | * @status : request status to be set, only works when |
| 93 | * request is still in progress. |
| 94 | *--------------------------------------------------------------*/ |
| 95 | static void done(struct fsl_ep *ep, struct fsl_req *req, int status) |
| 96 | { |
| 97 | struct fsl_udc *udc = NULL; |
| 98 | unsigned char stopped = ep->stopped; |
| 99 | struct ep_td_struct *curr_td, *next_td; |
| 100 | int j; |
| 101 | |
| 102 | udc = (struct fsl_udc *)ep->udc; |
| 103 | /* Removed the req from fsl_ep->queue */ |
| 104 | list_del_init(&req->queue); |
| 105 | |
| 106 | /* req.status should be set as -EINPROGRESS in ep_queue() */ |
| 107 | if (req->req.status == -EINPROGRESS) |
| 108 | req->req.status = status; |
| 109 | else |
| 110 | status = req->req.status; |
| 111 | |
| 112 | /* Free dtd for the request */ |
| 113 | next_td = req->head; |
| 114 | for (j = 0; j < req->dtd_count; j++) { |
| 115 | curr_td = next_td; |
| 116 | if (j != req->dtd_count - 1) { |
| 117 | next_td = curr_td->next_td_virt; |
| 118 | } |
| 119 | dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma); |
| 120 | } |
| 121 | |
| 122 | if (req->mapped) { |
| 123 | dma_unmap_single(ep->udc->gadget.dev.parent, |
| 124 | req->req.dma, req->req.length, |
| 125 | ep_is_in(ep) |
| 126 | ? DMA_TO_DEVICE |
| 127 | : DMA_FROM_DEVICE); |
| 128 | req->req.dma = DMA_ADDR_INVALID; |
| 129 | req->mapped = 0; |
| 130 | } else |
| 131 | dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, |
| 132 | req->req.dma, req->req.length, |
| 133 | ep_is_in(ep) |
| 134 | ? DMA_TO_DEVICE |
| 135 | : DMA_FROM_DEVICE); |
| 136 | |
| 137 | if (status && (status != -ESHUTDOWN)) |
| 138 | VDBG("complete %s req %p stat %d len %u/%u", |
| 139 | ep->ep.name, &req->req, status, |
| 140 | req->req.actual, req->req.length); |
| 141 | |
| 142 | ep->stopped = 1; |
| 143 | |
| 144 | spin_unlock(&ep->udc->lock); |
| 145 | /* complete() is from gadget layer, |
| 146 | * eg fsg->bulk_in_complete() */ |
| 147 | if (req->req.complete) |
| 148 | req->req.complete(&ep->ep, &req->req); |
| 149 | |
| 150 | spin_lock(&ep->udc->lock); |
| 151 | ep->stopped = stopped; |
| 152 | } |
| 153 | |
| 154 | /*----------------------------------------------------------------- |
| 155 | * nuke(): delete all requests related to this ep |
| 156 | * called with spinlock held |
| 157 | *--------------------------------------------------------------*/ |
| 158 | static void nuke(struct fsl_ep *ep, int status) |
| 159 | { |
| 160 | ep->stopped = 1; |
| 161 | |
| 162 | /* Flush fifo */ |
| 163 | fsl_ep_fifo_flush(&ep->ep); |
| 164 | |
| 165 | /* Whether this eq has request linked */ |
| 166 | while (!list_empty(&ep->queue)) { |
| 167 | struct fsl_req *req = NULL; |
| 168 | |
| 169 | req = list_entry(ep->queue.next, struct fsl_req, queue); |
| 170 | done(ep, req, status); |
| 171 | } |
| 172 | } |
| 173 | |
| 174 | /*------------------------------------------------------------------ |
| 175 | Internal Hardware related function |
| 176 | ------------------------------------------------------------------*/ |
| 177 | |
| 178 | static int dr_controller_setup(struct fsl_udc *udc) |
| 179 | { |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 180 | unsigned int tmp, portctrl; |
| 181 | #ifndef CONFIG_ARCH_MXC |
| 182 | unsigned int ctrl; |
| 183 | #endif |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 184 | unsigned long timeout; |
| 185 | #define FSL_UDC_RESET_TIMEOUT 1000 |
| 186 | |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 187 | /* Config PHY interface */ |
| 188 | portctrl = fsl_readl(&dr_regs->portsc1); |
| 189 | portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH); |
| 190 | switch (udc->phy_mode) { |
| 191 | case FSL_USB2_PHY_ULPI: |
| 192 | portctrl |= PORTSCX_PTS_ULPI; |
| 193 | break; |
| 194 | case FSL_USB2_PHY_UTMI_WIDE: |
| 195 | portctrl |= PORTSCX_PTW_16BIT; |
| 196 | /* fall through */ |
| 197 | case FSL_USB2_PHY_UTMI: |
| 198 | portctrl |= PORTSCX_PTS_UTMI; |
| 199 | break; |
| 200 | case FSL_USB2_PHY_SERIAL: |
| 201 | portctrl |= PORTSCX_PTS_FSLS; |
| 202 | break; |
| 203 | default: |
| 204 | return -EINVAL; |
| 205 | } |
| 206 | fsl_writel(portctrl, &dr_regs->portsc1); |
| 207 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 208 | /* Stop and reset the usb controller */ |
| 209 | tmp = fsl_readl(&dr_regs->usbcmd); |
| 210 | tmp &= ~USB_CMD_RUN_STOP; |
| 211 | fsl_writel(tmp, &dr_regs->usbcmd); |
| 212 | |
| 213 | tmp = fsl_readl(&dr_regs->usbcmd); |
| 214 | tmp |= USB_CMD_CTRL_RESET; |
| 215 | fsl_writel(tmp, &dr_regs->usbcmd); |
| 216 | |
| 217 | /* Wait for reset to complete */ |
| 218 | timeout = jiffies + FSL_UDC_RESET_TIMEOUT; |
| 219 | while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) { |
| 220 | if (time_after(jiffies, timeout)) { |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 221 | ERR("udc reset timeout!\n"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 222 | return -ETIMEDOUT; |
| 223 | } |
| 224 | cpu_relax(); |
| 225 | } |
| 226 | |
| 227 | /* Set the controller as device mode */ |
| 228 | tmp = fsl_readl(&dr_regs->usbmode); |
| 229 | tmp |= USB_MODE_CTRL_MODE_DEVICE; |
| 230 | /* Disable Setup Lockout */ |
| 231 | tmp |= USB_MODE_SETUP_LOCK_OFF; |
| 232 | fsl_writel(tmp, &dr_regs->usbmode); |
| 233 | |
| 234 | /* Clear the setup status */ |
| 235 | fsl_writel(0, &dr_regs->usbsts); |
| 236 | |
| 237 | tmp = udc->ep_qh_dma; |
| 238 | tmp &= USB_EP_LIST_ADDRESS_MASK; |
| 239 | fsl_writel(tmp, &dr_regs->endpointlistaddr); |
| 240 | |
| 241 | VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", |
Peter Korsgaard | 6ef65a7 | 2008-09-08 10:08:59 +0200 | [diff] [blame] | 242 | udc->ep_qh, (int)tmp, |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 243 | fsl_readl(&dr_regs->endpointlistaddr)); |
| 244 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 245 | /* Config control enable i/o output, cpu endian register */ |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 246 | #ifndef CONFIG_ARCH_MXC |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 247 | ctrl = __raw_readl(&usb_sys_regs->control); |
| 248 | ctrl |= USB_CTRL_IOENB; |
| 249 | __raw_writel(ctrl, &usb_sys_regs->control); |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 250 | #endif |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 251 | |
| 252 | #if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) |
| 253 | /* Turn on cache snooping hardware, since some PowerPC platforms |
| 254 | * wholly rely on hardware to deal with cache coherent. */ |
| 255 | |
| 256 | /* Setup Snooping for all the 4GB space */ |
| 257 | tmp = SNOOP_SIZE_2GB; /* starts from 0x0, size 2G */ |
| 258 | __raw_writel(tmp, &usb_sys_regs->snoop1); |
| 259 | tmp |= 0x80000000; /* starts from 0x8000000, size 2G */ |
| 260 | __raw_writel(tmp, &usb_sys_regs->snoop2); |
| 261 | #endif |
| 262 | |
| 263 | return 0; |
| 264 | } |
| 265 | |
| 266 | /* Enable DR irq and set controller to run state */ |
| 267 | static void dr_controller_run(struct fsl_udc *udc) |
| 268 | { |
| 269 | u32 temp; |
| 270 | |
| 271 | /* Enable DR irq reg */ |
| 272 | temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN |
| 273 | | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN |
| 274 | | USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN; |
| 275 | |
| 276 | fsl_writel(temp, &dr_regs->usbintr); |
| 277 | |
| 278 | /* Clear stopped bit */ |
| 279 | udc->stopped = 0; |
| 280 | |
| 281 | /* Set the controller as device mode */ |
| 282 | temp = fsl_readl(&dr_regs->usbmode); |
| 283 | temp |= USB_MODE_CTRL_MODE_DEVICE; |
| 284 | fsl_writel(temp, &dr_regs->usbmode); |
| 285 | |
| 286 | /* Set controller to Run */ |
| 287 | temp = fsl_readl(&dr_regs->usbcmd); |
| 288 | temp |= USB_CMD_RUN_STOP; |
| 289 | fsl_writel(temp, &dr_regs->usbcmd); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 290 | } |
| 291 | |
| 292 | static void dr_controller_stop(struct fsl_udc *udc) |
| 293 | { |
| 294 | unsigned int tmp; |
| 295 | |
| 296 | /* disable all INTR */ |
| 297 | fsl_writel(0, &dr_regs->usbintr); |
| 298 | |
| 299 | /* Set stopped bit for isr */ |
| 300 | udc->stopped = 1; |
| 301 | |
| 302 | /* disable IO output */ |
| 303 | /* usb_sys_regs->control = 0; */ |
| 304 | |
| 305 | /* set controller to Stop */ |
| 306 | tmp = fsl_readl(&dr_regs->usbcmd); |
| 307 | tmp &= ~USB_CMD_RUN_STOP; |
| 308 | fsl_writel(tmp, &dr_regs->usbcmd); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 309 | } |
| 310 | |
Will Newton | 9c94155 | 2008-08-12 15:39:07 +0100 | [diff] [blame] | 311 | static void dr_ep_setup(unsigned char ep_num, unsigned char dir, |
| 312 | unsigned char ep_type) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 313 | { |
| 314 | unsigned int tmp_epctrl = 0; |
| 315 | |
| 316 | tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); |
| 317 | if (dir) { |
| 318 | if (ep_num) |
| 319 | tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; |
| 320 | tmp_epctrl |= EPCTRL_TX_ENABLE; |
| 321 | tmp_epctrl |= ((unsigned int)(ep_type) |
| 322 | << EPCTRL_TX_EP_TYPE_SHIFT); |
| 323 | } else { |
| 324 | if (ep_num) |
| 325 | tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; |
| 326 | tmp_epctrl |= EPCTRL_RX_ENABLE; |
| 327 | tmp_epctrl |= ((unsigned int)(ep_type) |
| 328 | << EPCTRL_RX_EP_TYPE_SHIFT); |
| 329 | } |
| 330 | |
| 331 | fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); |
| 332 | } |
| 333 | |
| 334 | static void |
| 335 | dr_ep_change_stall(unsigned char ep_num, unsigned char dir, int value) |
| 336 | { |
| 337 | u32 tmp_epctrl = 0; |
| 338 | |
| 339 | tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); |
| 340 | |
| 341 | if (value) { |
| 342 | /* set the stall bit */ |
| 343 | if (dir) |
| 344 | tmp_epctrl |= EPCTRL_TX_EP_STALL; |
| 345 | else |
| 346 | tmp_epctrl |= EPCTRL_RX_EP_STALL; |
| 347 | } else { |
| 348 | /* clear the stall bit and reset data toggle */ |
| 349 | if (dir) { |
| 350 | tmp_epctrl &= ~EPCTRL_TX_EP_STALL; |
| 351 | tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; |
| 352 | } else { |
| 353 | tmp_epctrl &= ~EPCTRL_RX_EP_STALL; |
| 354 | tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; |
| 355 | } |
| 356 | } |
| 357 | fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); |
| 358 | } |
| 359 | |
| 360 | /* Get stall status of a specific ep |
| 361 | Return: 0: not stalled; 1:stalled */ |
| 362 | static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir) |
| 363 | { |
| 364 | u32 epctrl; |
| 365 | |
| 366 | epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); |
| 367 | if (dir) |
| 368 | return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0; |
| 369 | else |
| 370 | return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0; |
| 371 | } |
| 372 | |
| 373 | /******************************************************************** |
| 374 | Internal Structure Build up functions |
| 375 | ********************************************************************/ |
| 376 | |
| 377 | /*------------------------------------------------------------------ |
| 378 | * struct_ep_qh_setup(): set the Endpoint Capabilites field of QH |
| 379 | * @zlt: Zero Length Termination Select (1: disable; 0: enable) |
| 380 | * @mult: Mult field |
| 381 | ------------------------------------------------------------------*/ |
| 382 | static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, |
| 383 | unsigned char dir, unsigned char ep_type, |
| 384 | unsigned int max_pkt_len, |
| 385 | unsigned int zlt, unsigned char mult) |
| 386 | { |
| 387 | struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir]; |
| 388 | unsigned int tmp = 0; |
| 389 | |
| 390 | /* set the Endpoint Capabilites in QH */ |
| 391 | switch (ep_type) { |
| 392 | case USB_ENDPOINT_XFER_CONTROL: |
| 393 | /* Interrupt On Setup (IOS). for control ep */ |
| 394 | tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) |
| 395 | | EP_QUEUE_HEAD_IOS; |
| 396 | break; |
| 397 | case USB_ENDPOINT_XFER_ISOC: |
| 398 | tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) |
| 399 | | (mult << EP_QUEUE_HEAD_MULT_POS); |
| 400 | break; |
| 401 | case USB_ENDPOINT_XFER_BULK: |
| 402 | case USB_ENDPOINT_XFER_INT: |
| 403 | tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS; |
| 404 | break; |
| 405 | default: |
| 406 | VDBG("error ep type is %d", ep_type); |
| 407 | return; |
| 408 | } |
| 409 | if (zlt) |
| 410 | tmp |= EP_QUEUE_HEAD_ZLT_SEL; |
Li Yang | 9a6e184 | 2009-02-13 16:14:39 +0800 | [diff] [blame] | 411 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 412 | p_QH->max_pkt_length = cpu_to_le32(tmp); |
Li Yang | 9a6e184 | 2009-02-13 16:14:39 +0800 | [diff] [blame] | 413 | p_QH->next_dtd_ptr = 1; |
| 414 | p_QH->size_ioc_int_sts = 0; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 415 | } |
| 416 | |
| 417 | /* Setup qh structure and ep register for ep0. */ |
| 418 | static void ep0_setup(struct fsl_udc *udc) |
| 419 | { |
| 420 | /* the intialization of an ep includes: fields in QH, Regs, |
| 421 | * fsl_ep struct */ |
| 422 | struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL, |
| 423 | USB_MAX_CTRL_PAYLOAD, 0, 0); |
| 424 | struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL, |
| 425 | USB_MAX_CTRL_PAYLOAD, 0, 0); |
| 426 | dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL); |
| 427 | dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL); |
| 428 | |
| 429 | return; |
| 430 | |
| 431 | } |
| 432 | |
| 433 | /*********************************************************************** |
| 434 | Endpoint Management Functions |
| 435 | ***********************************************************************/ |
| 436 | |
| 437 | /*------------------------------------------------------------------------- |
| 438 | * when configurations are set, or when interface settings change |
| 439 | * for example the do_set_interface() in gadget layer, |
| 440 | * the driver will enable or disable the relevant endpoints |
| 441 | * ep0 doesn't use this routine. It is always enabled. |
| 442 | -------------------------------------------------------------------------*/ |
| 443 | static int fsl_ep_enable(struct usb_ep *_ep, |
| 444 | const struct usb_endpoint_descriptor *desc) |
| 445 | { |
| 446 | struct fsl_udc *udc = NULL; |
| 447 | struct fsl_ep *ep = NULL; |
| 448 | unsigned short max = 0; |
| 449 | unsigned char mult = 0, zlt; |
| 450 | int retval = -EINVAL; |
| 451 | unsigned long flags = 0; |
| 452 | |
| 453 | ep = container_of(_ep, struct fsl_ep, ep); |
| 454 | |
| 455 | /* catch various bogus parameters */ |
| 456 | if (!_ep || !desc || ep->desc |
| 457 | || (desc->bDescriptorType != USB_DT_ENDPOINT)) |
| 458 | return -EINVAL; |
| 459 | |
| 460 | udc = ep->udc; |
| 461 | |
| 462 | if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) |
| 463 | return -ESHUTDOWN; |
| 464 | |
| 465 | max = le16_to_cpu(desc->wMaxPacketSize); |
| 466 | |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame^] | 467 | /* Disable automatic zlp generation. Driver is responsible to indicate |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 468 | * explicitly through req->req.zero. This is needed to enable multi-td |
| 469 | * request. */ |
| 470 | zlt = 1; |
| 471 | |
| 472 | /* Assume the max packet size from gadget is always correct */ |
| 473 | switch (desc->bmAttributes & 0x03) { |
| 474 | case USB_ENDPOINT_XFER_CONTROL: |
| 475 | case USB_ENDPOINT_XFER_BULK: |
| 476 | case USB_ENDPOINT_XFER_INT: |
| 477 | /* mult = 0. Execute N Transactions as demonstrated by |
| 478 | * the USB variable length packet protocol where N is |
| 479 | * computed using the Maximum Packet Length (dQH) and |
| 480 | * the Total Bytes field (dTD) */ |
| 481 | mult = 0; |
| 482 | break; |
| 483 | case USB_ENDPOINT_XFER_ISOC: |
| 484 | /* Calculate transactions needed for high bandwidth iso */ |
| 485 | mult = (unsigned char)(1 + ((max >> 11) & 0x03)); |
Dinh Nguyen | 88e3b59 | 2010-05-04 10:03:01 -0500 | [diff] [blame] | 486 | max = max & 0x7ff; /* bit 0~10 */ |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 487 | /* 3 transactions at most */ |
| 488 | if (mult > 3) |
| 489 | goto en_done; |
| 490 | break; |
| 491 | default: |
| 492 | goto en_done; |
| 493 | } |
| 494 | |
| 495 | spin_lock_irqsave(&udc->lock, flags); |
| 496 | ep->ep.maxpacket = max; |
| 497 | ep->desc = desc; |
| 498 | ep->stopped = 0; |
| 499 | |
| 500 | /* Controller related setup */ |
| 501 | /* Init EPx Queue Head (Ep Capabilites field in QH |
| 502 | * according to max, zlt, mult) */ |
| 503 | struct_ep_qh_setup(udc, (unsigned char) ep_index(ep), |
| 504 | (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) |
| 505 | ? USB_SEND : USB_RECV), |
| 506 | (unsigned char) (desc->bmAttributes |
| 507 | & USB_ENDPOINT_XFERTYPE_MASK), |
| 508 | max, zlt, mult); |
| 509 | |
| 510 | /* Init endpoint ctrl register */ |
| 511 | dr_ep_setup((unsigned char) ep_index(ep), |
| 512 | (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) |
| 513 | ? USB_SEND : USB_RECV), |
| 514 | (unsigned char) (desc->bmAttributes |
| 515 | & USB_ENDPOINT_XFERTYPE_MASK)); |
| 516 | |
| 517 | spin_unlock_irqrestore(&udc->lock, flags); |
| 518 | retval = 0; |
| 519 | |
| 520 | VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name, |
| 521 | ep->desc->bEndpointAddress & 0x0f, |
| 522 | (desc->bEndpointAddress & USB_DIR_IN) |
| 523 | ? "in" : "out", max); |
| 524 | en_done: |
| 525 | return retval; |
| 526 | } |
| 527 | |
| 528 | /*--------------------------------------------------------------------- |
| 529 | * @ep : the ep being unconfigured. May not be ep0 |
| 530 | * Any pending and uncomplete req will complete with status (-ESHUTDOWN) |
| 531 | *---------------------------------------------------------------------*/ |
| 532 | static int fsl_ep_disable(struct usb_ep *_ep) |
| 533 | { |
| 534 | struct fsl_udc *udc = NULL; |
| 535 | struct fsl_ep *ep = NULL; |
| 536 | unsigned long flags = 0; |
| 537 | u32 epctrl; |
| 538 | int ep_num; |
| 539 | |
| 540 | ep = container_of(_ep, struct fsl_ep, ep); |
| 541 | if (!_ep || !ep->desc) { |
| 542 | VDBG("%s not enabled", _ep ? ep->ep.name : NULL); |
| 543 | return -EINVAL; |
| 544 | } |
| 545 | |
| 546 | /* disable ep on controller */ |
| 547 | ep_num = ep_index(ep); |
| 548 | epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); |
| 549 | if (ep_is_in(ep)) |
| 550 | epctrl &= ~EPCTRL_TX_ENABLE; |
| 551 | else |
| 552 | epctrl &= ~EPCTRL_RX_ENABLE; |
| 553 | fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); |
| 554 | |
| 555 | udc = (struct fsl_udc *)ep->udc; |
| 556 | spin_lock_irqsave(&udc->lock, flags); |
| 557 | |
| 558 | /* nuke all pending requests (does flush) */ |
| 559 | nuke(ep, -ESHUTDOWN); |
| 560 | |
Will Newton | 7483cff8 | 2008-08-12 15:39:09 +0100 | [diff] [blame] | 561 | ep->desc = NULL; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 562 | ep->stopped = 1; |
| 563 | spin_unlock_irqrestore(&udc->lock, flags); |
| 564 | |
| 565 | VDBG("disabled %s OK", _ep->name); |
| 566 | return 0; |
| 567 | } |
| 568 | |
| 569 | /*--------------------------------------------------------------------- |
| 570 | * allocate a request object used by this endpoint |
| 571 | * the main operation is to insert the req->queue to the eq->queue |
| 572 | * Returns the request, or null if one could not be allocated |
| 573 | *---------------------------------------------------------------------*/ |
| 574 | static struct usb_request * |
| 575 | fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) |
| 576 | { |
| 577 | struct fsl_req *req = NULL; |
| 578 | |
| 579 | req = kzalloc(sizeof *req, gfp_flags); |
| 580 | if (!req) |
| 581 | return NULL; |
| 582 | |
| 583 | req->req.dma = DMA_ADDR_INVALID; |
| 584 | INIT_LIST_HEAD(&req->queue); |
| 585 | |
| 586 | return &req->req; |
| 587 | } |
| 588 | |
| 589 | static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| 590 | { |
| 591 | struct fsl_req *req = NULL; |
| 592 | |
| 593 | req = container_of(_req, struct fsl_req, req); |
| 594 | |
| 595 | if (_req) |
| 596 | kfree(req); |
| 597 | } |
| 598 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 599 | /*-------------------------------------------------------------------------*/ |
Will Newton | 224b503 | 2008-08-12 15:39:15 +0100 | [diff] [blame] | 600 | static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 601 | { |
| 602 | int i = ep_index(ep) * 2 + ep_is_in(ep); |
| 603 | u32 temp, bitmask, tmp_stat; |
| 604 | struct ep_queue_head *dQH = &ep->udc->ep_qh[i]; |
| 605 | |
| 606 | /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr); |
| 607 | VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */ |
| 608 | |
| 609 | bitmask = ep_is_in(ep) |
| 610 | ? (1 << (ep_index(ep) + 16)) |
| 611 | : (1 << (ep_index(ep))); |
| 612 | |
| 613 | /* check if the pipe is empty */ |
| 614 | if (!(list_empty(&ep->queue))) { |
| 615 | /* Add td to the end */ |
| 616 | struct fsl_req *lastreq; |
| 617 | lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); |
| 618 | lastreq->tail->next_td_ptr = |
| 619 | cpu_to_le32(req->head->td_dma & DTD_ADDR_MASK); |
| 620 | /* Read prime bit, if 1 goto done */ |
| 621 | if (fsl_readl(&dr_regs->endpointprime) & bitmask) |
| 622 | goto out; |
| 623 | |
| 624 | do { |
| 625 | /* Set ATDTW bit in USBCMD */ |
| 626 | temp = fsl_readl(&dr_regs->usbcmd); |
| 627 | fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd); |
| 628 | |
| 629 | /* Read correct status bit */ |
| 630 | tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask; |
| 631 | |
| 632 | } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW)); |
| 633 | |
| 634 | /* Write ATDTW bit to 0 */ |
| 635 | temp = fsl_readl(&dr_regs->usbcmd); |
| 636 | fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd); |
| 637 | |
| 638 | if (tmp_stat) |
| 639 | goto out; |
| 640 | } |
| 641 | |
| 642 | /* Write dQH next pointer and terminate bit to 0 */ |
| 643 | temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; |
| 644 | dQH->next_dtd_ptr = cpu_to_le32(temp); |
| 645 | |
| 646 | /* Clear active and halt bit */ |
| 647 | temp = cpu_to_le32(~(EP_QUEUE_HEAD_STATUS_ACTIVE |
| 648 | | EP_QUEUE_HEAD_STATUS_HALT)); |
| 649 | dQH->size_ioc_int_sts &= temp; |
| 650 | |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame^] | 651 | /* Ensure that updates to the QH will occur before priming. */ |
Will Newton | 59097fb | 2008-08-12 15:39:16 +0100 | [diff] [blame] | 652 | wmb(); |
| 653 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 654 | /* Prime endpoint by writing 1 to ENDPTPRIME */ |
| 655 | temp = ep_is_in(ep) |
| 656 | ? (1 << (ep_index(ep) + 16)) |
| 657 | : (1 << (ep_index(ep))); |
| 658 | fsl_writel(temp, &dr_regs->endpointprime); |
| 659 | out: |
Will Newton | 224b503 | 2008-08-12 15:39:15 +0100 | [diff] [blame] | 660 | return; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 661 | } |
| 662 | |
| 663 | /* Fill in the dTD structure |
| 664 | * @req: request that the transfer belongs to |
| 665 | * @length: return actually data length of the dTD |
| 666 | * @dma: return dma address of the dTD |
| 667 | * @is_last: return flag if it is the last dTD of the request |
| 668 | * return: pointer to the built dTD */ |
| 669 | static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, |
| 670 | dma_addr_t *dma, int *is_last) |
| 671 | { |
| 672 | u32 swap_temp; |
| 673 | struct ep_td_struct *dtd; |
| 674 | |
| 675 | /* how big will this transfer be? */ |
| 676 | *length = min(req->req.length - req->req.actual, |
| 677 | (unsigned)EP_MAX_LENGTH_TRANSFER); |
| 678 | |
| 679 | dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma); |
| 680 | if (dtd == NULL) |
| 681 | return dtd; |
| 682 | |
| 683 | dtd->td_dma = *dma; |
| 684 | /* Clear reserved field */ |
| 685 | swap_temp = cpu_to_le32(dtd->size_ioc_sts); |
| 686 | swap_temp &= ~DTD_RESERVED_FIELDS; |
| 687 | dtd->size_ioc_sts = cpu_to_le32(swap_temp); |
| 688 | |
| 689 | /* Init all of buffer page pointers */ |
| 690 | swap_temp = (u32) (req->req.dma + req->req.actual); |
| 691 | dtd->buff_ptr0 = cpu_to_le32(swap_temp); |
| 692 | dtd->buff_ptr1 = cpu_to_le32(swap_temp + 0x1000); |
| 693 | dtd->buff_ptr2 = cpu_to_le32(swap_temp + 0x2000); |
| 694 | dtd->buff_ptr3 = cpu_to_le32(swap_temp + 0x3000); |
| 695 | dtd->buff_ptr4 = cpu_to_le32(swap_temp + 0x4000); |
| 696 | |
| 697 | req->req.actual += *length; |
| 698 | |
| 699 | /* zlp is needed if req->req.zero is set */ |
| 700 | if (req->req.zero) { |
| 701 | if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) |
| 702 | *is_last = 1; |
| 703 | else |
| 704 | *is_last = 0; |
| 705 | } else if (req->req.length == req->req.actual) |
| 706 | *is_last = 1; |
| 707 | else |
| 708 | *is_last = 0; |
| 709 | |
| 710 | if ((*is_last) == 0) |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 711 | VDBG("multi-dtd request!"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 712 | /* Fill in the transfer size; set active bit */ |
| 713 | swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE); |
| 714 | |
| 715 | /* Enable interrupt for the last dtd of a request */ |
| 716 | if (*is_last && !req->req.no_interrupt) |
| 717 | swap_temp |= DTD_IOC; |
| 718 | |
| 719 | dtd->size_ioc_sts = cpu_to_le32(swap_temp); |
| 720 | |
| 721 | mb(); |
| 722 | |
| 723 | VDBG("length = %d address= 0x%x", *length, (int)*dma); |
| 724 | |
| 725 | return dtd; |
| 726 | } |
| 727 | |
| 728 | /* Generate dtd chain for a request */ |
| 729 | static int fsl_req_to_dtd(struct fsl_req *req) |
| 730 | { |
| 731 | unsigned count; |
| 732 | int is_last; |
| 733 | int is_first =1; |
| 734 | struct ep_td_struct *last_dtd = NULL, *dtd; |
| 735 | dma_addr_t dma; |
| 736 | |
| 737 | do { |
| 738 | dtd = fsl_build_dtd(req, &count, &dma, &is_last); |
| 739 | if (dtd == NULL) |
| 740 | return -ENOMEM; |
| 741 | |
| 742 | if (is_first) { |
| 743 | is_first = 0; |
| 744 | req->head = dtd; |
| 745 | } else { |
| 746 | last_dtd->next_td_ptr = cpu_to_le32(dma); |
| 747 | last_dtd->next_td_virt = dtd; |
| 748 | } |
| 749 | last_dtd = dtd; |
| 750 | |
| 751 | req->dtd_count++; |
| 752 | } while (!is_last); |
| 753 | |
| 754 | dtd->next_td_ptr = cpu_to_le32(DTD_NEXT_TERMINATE); |
| 755 | |
| 756 | req->tail = dtd; |
| 757 | |
| 758 | return 0; |
| 759 | } |
| 760 | |
| 761 | /* queues (submits) an I/O request to an endpoint */ |
| 762 | static int |
| 763 | fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) |
| 764 | { |
| 765 | struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); |
| 766 | struct fsl_req *req = container_of(_req, struct fsl_req, req); |
| 767 | struct fsl_udc *udc; |
| 768 | unsigned long flags; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 769 | |
| 770 | /* catch various bogus parameters */ |
| 771 | if (!_req || !req->req.complete || !req->req.buf |
| 772 | || !list_empty(&req->queue)) { |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 773 | VDBG("%s, bad params", __func__); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 774 | return -EINVAL; |
| 775 | } |
Li Yang | 2336a98 | 2008-01-03 10:04:40 -0800 | [diff] [blame] | 776 | if (unlikely(!_ep || !ep->desc)) { |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 777 | VDBG("%s, bad ep", __func__); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 778 | return -EINVAL; |
| 779 | } |
| 780 | if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { |
| 781 | if (req->req.length > ep->ep.maxpacket) |
| 782 | return -EMSGSIZE; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 783 | } |
| 784 | |
| 785 | udc = ep->udc; |
| 786 | if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) |
| 787 | return -ESHUTDOWN; |
| 788 | |
| 789 | req->ep = ep; |
| 790 | |
| 791 | /* map virtual address to hardware */ |
| 792 | if (req->req.dma == DMA_ADDR_INVALID) { |
| 793 | req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, |
| 794 | req->req.buf, |
| 795 | req->req.length, ep_is_in(ep) |
| 796 | ? DMA_TO_DEVICE |
| 797 | : DMA_FROM_DEVICE); |
| 798 | req->mapped = 1; |
| 799 | } else { |
| 800 | dma_sync_single_for_device(ep->udc->gadget.dev.parent, |
| 801 | req->req.dma, req->req.length, |
| 802 | ep_is_in(ep) |
| 803 | ? DMA_TO_DEVICE |
| 804 | : DMA_FROM_DEVICE); |
| 805 | req->mapped = 0; |
| 806 | } |
| 807 | |
| 808 | req->req.status = -EINPROGRESS; |
| 809 | req->req.actual = 0; |
| 810 | req->dtd_count = 0; |
| 811 | |
| 812 | spin_lock_irqsave(&udc->lock, flags); |
| 813 | |
| 814 | /* build dtds and push them to device queue */ |
| 815 | if (!fsl_req_to_dtd(req)) { |
| 816 | fsl_queue_td(ep, req); |
| 817 | } else { |
| 818 | spin_unlock_irqrestore(&udc->lock, flags); |
| 819 | return -ENOMEM; |
| 820 | } |
| 821 | |
| 822 | /* Update ep0 state */ |
| 823 | if ((ep_index(ep) == 0)) |
| 824 | udc->ep0_state = DATA_STATE_XMIT; |
| 825 | |
| 826 | /* irq handler advances the queue */ |
| 827 | if (req != NULL) |
| 828 | list_add_tail(&req->queue, &ep->queue); |
| 829 | spin_unlock_irqrestore(&udc->lock, flags); |
| 830 | |
| 831 | return 0; |
| 832 | } |
| 833 | |
| 834 | /* dequeues (cancels, unlinks) an I/O request from an endpoint */ |
| 835 | static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| 836 | { |
| 837 | struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); |
| 838 | struct fsl_req *req; |
| 839 | unsigned long flags; |
| 840 | int ep_num, stopped, ret = 0; |
| 841 | u32 epctrl; |
| 842 | |
| 843 | if (!_ep || !_req) |
| 844 | return -EINVAL; |
| 845 | |
| 846 | spin_lock_irqsave(&ep->udc->lock, flags); |
| 847 | stopped = ep->stopped; |
| 848 | |
| 849 | /* Stop the ep before we deal with the queue */ |
| 850 | ep->stopped = 1; |
| 851 | ep_num = ep_index(ep); |
| 852 | epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); |
| 853 | if (ep_is_in(ep)) |
| 854 | epctrl &= ~EPCTRL_TX_ENABLE; |
| 855 | else |
| 856 | epctrl &= ~EPCTRL_RX_ENABLE; |
| 857 | fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); |
| 858 | |
| 859 | /* make sure it's actually queued on this endpoint */ |
| 860 | list_for_each_entry(req, &ep->queue, queue) { |
| 861 | if (&req->req == _req) |
| 862 | break; |
| 863 | } |
| 864 | if (&req->req != _req) { |
| 865 | ret = -EINVAL; |
| 866 | goto out; |
| 867 | } |
| 868 | |
| 869 | /* The request is in progress, or completed but not dequeued */ |
| 870 | if (ep->queue.next == &req->queue) { |
| 871 | _req->status = -ECONNRESET; |
| 872 | fsl_ep_fifo_flush(_ep); /* flush current transfer */ |
| 873 | |
| 874 | /* The request isn't the last request in this ep queue */ |
| 875 | if (req->queue.next != &ep->queue) { |
| 876 | struct ep_queue_head *qh; |
| 877 | struct fsl_req *next_req; |
| 878 | |
| 879 | qh = ep->qh; |
| 880 | next_req = list_entry(req->queue.next, struct fsl_req, |
| 881 | queue); |
| 882 | |
| 883 | /* Point the QH to the first TD of next request */ |
| 884 | fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr); |
| 885 | } |
| 886 | |
| 887 | /* The request hasn't been processed, patch up the TD chain */ |
| 888 | } else { |
| 889 | struct fsl_req *prev_req; |
| 890 | |
| 891 | prev_req = list_entry(req->queue.prev, struct fsl_req, queue); |
| 892 | fsl_writel(fsl_readl(&req->tail->next_td_ptr), |
| 893 | &prev_req->tail->next_td_ptr); |
| 894 | |
| 895 | } |
| 896 | |
| 897 | done(ep, req, -ECONNRESET); |
| 898 | |
| 899 | /* Enable EP */ |
| 900 | out: epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); |
| 901 | if (ep_is_in(ep)) |
| 902 | epctrl |= EPCTRL_TX_ENABLE; |
| 903 | else |
| 904 | epctrl |= EPCTRL_RX_ENABLE; |
| 905 | fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); |
| 906 | ep->stopped = stopped; |
| 907 | |
| 908 | spin_unlock_irqrestore(&ep->udc->lock, flags); |
| 909 | return ret; |
| 910 | } |
| 911 | |
| 912 | /*-------------------------------------------------------------------------*/ |
| 913 | |
| 914 | /*----------------------------------------------------------------- |
| 915 | * modify the endpoint halt feature |
| 916 | * @ep: the non-isochronous endpoint being stalled |
| 917 | * @value: 1--set halt 0--clear halt |
| 918 | * Returns zero, or a negative error code. |
| 919 | *----------------------------------------------------------------*/ |
| 920 | static int fsl_ep_set_halt(struct usb_ep *_ep, int value) |
| 921 | { |
| 922 | struct fsl_ep *ep = NULL; |
| 923 | unsigned long flags = 0; |
| 924 | int status = -EOPNOTSUPP; /* operation not supported */ |
| 925 | unsigned char ep_dir = 0, ep_num = 0; |
| 926 | struct fsl_udc *udc = NULL; |
| 927 | |
| 928 | ep = container_of(_ep, struct fsl_ep, ep); |
| 929 | udc = ep->udc; |
| 930 | if (!_ep || !ep->desc) { |
| 931 | status = -EINVAL; |
| 932 | goto out; |
| 933 | } |
| 934 | |
| 935 | if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { |
| 936 | status = -EOPNOTSUPP; |
| 937 | goto out; |
| 938 | } |
| 939 | |
| 940 | /* Attempt to halt IN ep will fail if any transfer requests |
| 941 | * are still queue */ |
| 942 | if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { |
| 943 | status = -EAGAIN; |
| 944 | goto out; |
| 945 | } |
| 946 | |
| 947 | status = 0; |
| 948 | ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; |
| 949 | ep_num = (unsigned char)(ep_index(ep)); |
| 950 | spin_lock_irqsave(&ep->udc->lock, flags); |
| 951 | dr_ep_change_stall(ep_num, ep_dir, value); |
| 952 | spin_unlock_irqrestore(&ep->udc->lock, flags); |
| 953 | |
| 954 | if (ep_index(ep) == 0) { |
| 955 | udc->ep0_state = WAIT_FOR_SETUP; |
| 956 | udc->ep0_dir = 0; |
| 957 | } |
| 958 | out: |
| 959 | VDBG(" %s %s halt stat %d", ep->ep.name, |
| 960 | value ? "set" : "clear", status); |
| 961 | |
| 962 | return status; |
| 963 | } |
| 964 | |
| 965 | static void fsl_ep_fifo_flush(struct usb_ep *_ep) |
| 966 | { |
| 967 | struct fsl_ep *ep; |
| 968 | int ep_num, ep_dir; |
| 969 | u32 bits; |
| 970 | unsigned long timeout; |
| 971 | #define FSL_UDC_FLUSH_TIMEOUT 1000 |
| 972 | |
| 973 | if (!_ep) { |
| 974 | return; |
| 975 | } else { |
| 976 | ep = container_of(_ep, struct fsl_ep, ep); |
| 977 | if (!ep->desc) |
| 978 | return; |
| 979 | } |
| 980 | ep_num = ep_index(ep); |
| 981 | ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; |
| 982 | |
| 983 | if (ep_num == 0) |
| 984 | bits = (1 << 16) | 1; |
| 985 | else if (ep_dir == USB_SEND) |
| 986 | bits = 1 << (16 + ep_num); |
| 987 | else |
| 988 | bits = 1 << ep_num; |
| 989 | |
| 990 | timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT; |
| 991 | do { |
| 992 | fsl_writel(bits, &dr_regs->endptflush); |
| 993 | |
| 994 | /* Wait until flush complete */ |
| 995 | while (fsl_readl(&dr_regs->endptflush)) { |
| 996 | if (time_after(jiffies, timeout)) { |
| 997 | ERR("ep flush timeout\n"); |
| 998 | return; |
| 999 | } |
| 1000 | cpu_relax(); |
| 1001 | } |
| 1002 | /* See if we need to flush again */ |
| 1003 | } while (fsl_readl(&dr_regs->endptstatus) & bits); |
| 1004 | } |
| 1005 | |
| 1006 | static struct usb_ep_ops fsl_ep_ops = { |
| 1007 | .enable = fsl_ep_enable, |
| 1008 | .disable = fsl_ep_disable, |
| 1009 | |
| 1010 | .alloc_request = fsl_alloc_request, |
| 1011 | .free_request = fsl_free_request, |
| 1012 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1013 | .queue = fsl_ep_queue, |
| 1014 | .dequeue = fsl_ep_dequeue, |
| 1015 | |
| 1016 | .set_halt = fsl_ep_set_halt, |
| 1017 | .fifo_flush = fsl_ep_fifo_flush, /* flush fifo */ |
| 1018 | }; |
| 1019 | |
| 1020 | /*------------------------------------------------------------------------- |
| 1021 | Gadget Driver Layer Operations |
| 1022 | -------------------------------------------------------------------------*/ |
| 1023 | |
| 1024 | /*---------------------------------------------------------------------- |
| 1025 | * Get the current frame number (from DR frame_index Reg ) |
| 1026 | *----------------------------------------------------------------------*/ |
| 1027 | static int fsl_get_frame(struct usb_gadget *gadget) |
| 1028 | { |
| 1029 | return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS); |
| 1030 | } |
| 1031 | |
| 1032 | /*----------------------------------------------------------------------- |
| 1033 | * Tries to wake up the host connected to this gadget |
| 1034 | -----------------------------------------------------------------------*/ |
| 1035 | static int fsl_wakeup(struct usb_gadget *gadget) |
| 1036 | { |
| 1037 | struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget); |
| 1038 | u32 portsc; |
| 1039 | |
| 1040 | /* Remote wakeup feature not enabled by host */ |
| 1041 | if (!udc->remote_wakeup) |
| 1042 | return -ENOTSUPP; |
| 1043 | |
| 1044 | portsc = fsl_readl(&dr_regs->portsc1); |
| 1045 | /* not suspended? */ |
| 1046 | if (!(portsc & PORTSCX_PORT_SUSPEND)) |
| 1047 | return 0; |
| 1048 | /* trigger force resume */ |
| 1049 | portsc |= PORTSCX_PORT_FORCE_RESUME; |
| 1050 | fsl_writel(portsc, &dr_regs->portsc1); |
| 1051 | return 0; |
| 1052 | } |
| 1053 | |
| 1054 | static int can_pullup(struct fsl_udc *udc) |
| 1055 | { |
| 1056 | return udc->driver && udc->softconnect && udc->vbus_active; |
| 1057 | } |
| 1058 | |
| 1059 | /* Notify controller that VBUS is powered, Called by whatever |
| 1060 | detects VBUS sessions */ |
| 1061 | static int fsl_vbus_session(struct usb_gadget *gadget, int is_active) |
| 1062 | { |
| 1063 | struct fsl_udc *udc; |
| 1064 | unsigned long flags; |
| 1065 | |
| 1066 | udc = container_of(gadget, struct fsl_udc, gadget); |
| 1067 | spin_lock_irqsave(&udc->lock, flags); |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 1068 | VDBG("VBUS %s", is_active ? "on" : "off"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1069 | udc->vbus_active = (is_active != 0); |
| 1070 | if (can_pullup(udc)) |
| 1071 | fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), |
| 1072 | &dr_regs->usbcmd); |
| 1073 | else |
| 1074 | fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP), |
| 1075 | &dr_regs->usbcmd); |
| 1076 | spin_unlock_irqrestore(&udc->lock, flags); |
| 1077 | return 0; |
| 1078 | } |
| 1079 | |
| 1080 | /* constrain controller's VBUS power usage |
| 1081 | * This call is used by gadget drivers during SET_CONFIGURATION calls, |
| 1082 | * reporting how much power the device may consume. For example, this |
| 1083 | * could affect how quickly batteries are recharged. |
| 1084 | * |
| 1085 | * Returns zero on success, else negative errno. |
| 1086 | */ |
| 1087 | static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) |
| 1088 | { |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1089 | struct fsl_udc *udc; |
| 1090 | |
| 1091 | udc = container_of(gadget, struct fsl_udc, gadget); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1092 | if (udc->transceiver) |
| 1093 | return otg_set_power(udc->transceiver, mA); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1094 | return -ENOTSUPP; |
| 1095 | } |
| 1096 | |
| 1097 | /* Change Data+ pullup status |
| 1098 | * this func is used by usb_gadget_connect/disconnet |
| 1099 | */ |
| 1100 | static int fsl_pullup(struct usb_gadget *gadget, int is_on) |
| 1101 | { |
| 1102 | struct fsl_udc *udc; |
| 1103 | |
| 1104 | udc = container_of(gadget, struct fsl_udc, gadget); |
| 1105 | udc->softconnect = (is_on != 0); |
| 1106 | if (can_pullup(udc)) |
| 1107 | fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), |
| 1108 | &dr_regs->usbcmd); |
| 1109 | else |
| 1110 | fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP), |
| 1111 | &dr_regs->usbcmd); |
| 1112 | |
| 1113 | return 0; |
| 1114 | } |
| 1115 | |
David Brownell | 9454a57 | 2007-10-04 18:05:17 -0700 | [diff] [blame] | 1116 | /* defined in gadget.h */ |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1117 | static struct usb_gadget_ops fsl_gadget_ops = { |
| 1118 | .get_frame = fsl_get_frame, |
| 1119 | .wakeup = fsl_wakeup, |
| 1120 | /* .set_selfpowered = fsl_set_selfpowered, */ /* Always selfpowered */ |
| 1121 | .vbus_session = fsl_vbus_session, |
| 1122 | .vbus_draw = fsl_vbus_draw, |
| 1123 | .pullup = fsl_pullup, |
| 1124 | }; |
| 1125 | |
| 1126 | /* Set protocol stall on ep0, protocol stall will automatically be cleared |
| 1127 | on new transaction */ |
| 1128 | static void ep0stall(struct fsl_udc *udc) |
| 1129 | { |
| 1130 | u32 tmp; |
| 1131 | |
| 1132 | /* must set tx and rx to stall at the same time */ |
| 1133 | tmp = fsl_readl(&dr_regs->endptctrl[0]); |
| 1134 | tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL; |
| 1135 | fsl_writel(tmp, &dr_regs->endptctrl[0]); |
| 1136 | udc->ep0_state = WAIT_FOR_SETUP; |
| 1137 | udc->ep0_dir = 0; |
| 1138 | } |
| 1139 | |
| 1140 | /* Prime a status phase for ep0 */ |
| 1141 | static int ep0_prime_status(struct fsl_udc *udc, int direction) |
| 1142 | { |
| 1143 | struct fsl_req *req = udc->status_req; |
| 1144 | struct fsl_ep *ep; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1145 | |
| 1146 | if (direction == EP_DIR_IN) |
| 1147 | udc->ep0_dir = USB_DIR_IN; |
| 1148 | else |
| 1149 | udc->ep0_dir = USB_DIR_OUT; |
| 1150 | |
| 1151 | ep = &udc->eps[0]; |
| 1152 | udc->ep0_state = WAIT_FOR_OUT_STATUS; |
| 1153 | |
| 1154 | req->ep = ep; |
| 1155 | req->req.length = 0; |
| 1156 | req->req.status = -EINPROGRESS; |
| 1157 | req->req.actual = 0; |
| 1158 | req->req.complete = NULL; |
| 1159 | req->dtd_count = 0; |
| 1160 | |
| 1161 | if (fsl_req_to_dtd(req) == 0) |
Will Newton | 224b503 | 2008-08-12 15:39:15 +0100 | [diff] [blame] | 1162 | fsl_queue_td(ep, req); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1163 | else |
| 1164 | return -ENOMEM; |
| 1165 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1166 | list_add_tail(&req->queue, &ep->queue); |
| 1167 | |
Will Newton | 224b503 | 2008-08-12 15:39:15 +0100 | [diff] [blame] | 1168 | return 0; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1169 | } |
| 1170 | |
Will Newton | 825bee3 | 2008-08-12 15:39:14 +0100 | [diff] [blame] | 1171 | static void udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1172 | { |
| 1173 | struct fsl_ep *ep = get_ep_by_pipe(udc, pipe); |
| 1174 | |
Will Newton | 825bee3 | 2008-08-12 15:39:14 +0100 | [diff] [blame] | 1175 | if (ep->name) |
| 1176 | nuke(ep, -ESHUTDOWN); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1177 | } |
| 1178 | |
| 1179 | /* |
| 1180 | * ch9 Set address |
| 1181 | */ |
| 1182 | static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length) |
| 1183 | { |
| 1184 | /* Save the new address to device struct */ |
| 1185 | udc->device_address = (u8) value; |
| 1186 | /* Update usb state */ |
| 1187 | udc->usb_state = USB_STATE_ADDRESS; |
| 1188 | /* Status phase */ |
| 1189 | if (ep0_prime_status(udc, EP_DIR_IN)) |
| 1190 | ep0stall(udc); |
| 1191 | } |
| 1192 | |
| 1193 | /* |
| 1194 | * ch9 Get status |
| 1195 | */ |
| 1196 | static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, |
| 1197 | u16 index, u16 length) |
| 1198 | { |
| 1199 | u16 tmp = 0; /* Status, cpu endian */ |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1200 | struct fsl_req *req; |
| 1201 | struct fsl_ep *ep; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1202 | |
| 1203 | ep = &udc->eps[0]; |
| 1204 | |
| 1205 | if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { |
| 1206 | /* Get device status */ |
| 1207 | tmp = 1 << USB_DEVICE_SELF_POWERED; |
| 1208 | tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP; |
| 1209 | } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { |
| 1210 | /* Get interface status */ |
| 1211 | /* We don't have interface information in udc driver */ |
| 1212 | tmp = 0; |
| 1213 | } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { |
| 1214 | /* Get endpoint status */ |
| 1215 | struct fsl_ep *target_ep; |
| 1216 | |
| 1217 | target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index)); |
| 1218 | |
| 1219 | /* stall if endpoint doesn't exist */ |
| 1220 | if (!target_ep->desc) |
| 1221 | goto stall; |
| 1222 | tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep)) |
| 1223 | << USB_ENDPOINT_HALT; |
| 1224 | } |
| 1225 | |
| 1226 | udc->ep0_dir = USB_DIR_IN; |
| 1227 | /* Borrow the per device status_req */ |
| 1228 | req = udc->status_req; |
| 1229 | /* Fill in the reqest structure */ |
| 1230 | *((u16 *) req->req.buf) = cpu_to_le16(tmp); |
| 1231 | req->ep = ep; |
| 1232 | req->req.length = 2; |
| 1233 | req->req.status = -EINPROGRESS; |
| 1234 | req->req.actual = 0; |
| 1235 | req->req.complete = NULL; |
| 1236 | req->dtd_count = 0; |
| 1237 | |
| 1238 | /* prime the data phase */ |
| 1239 | if ((fsl_req_to_dtd(req) == 0)) |
Will Newton | 224b503 | 2008-08-12 15:39:15 +0100 | [diff] [blame] | 1240 | fsl_queue_td(ep, req); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1241 | else /* no mem */ |
| 1242 | goto stall; |
| 1243 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1244 | list_add_tail(&req->queue, &ep->queue); |
| 1245 | udc->ep0_state = DATA_STATE_XMIT; |
| 1246 | return; |
| 1247 | stall: |
| 1248 | ep0stall(udc); |
| 1249 | } |
| 1250 | |
| 1251 | static void setup_received_irq(struct fsl_udc *udc, |
| 1252 | struct usb_ctrlrequest *setup) |
| 1253 | { |
| 1254 | u16 wValue = le16_to_cpu(setup->wValue); |
| 1255 | u16 wIndex = le16_to_cpu(setup->wIndex); |
| 1256 | u16 wLength = le16_to_cpu(setup->wLength); |
| 1257 | |
| 1258 | udc_reset_ep_queue(udc, 0); |
| 1259 | |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1260 | /* We process some stardard setup requests here */ |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1261 | switch (setup->bRequest) { |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1262 | case USB_REQ_GET_STATUS: |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1263 | /* Data+Status phase from udc */ |
| 1264 | if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1265 | != (USB_DIR_IN | USB_TYPE_STANDARD)) |
| 1266 | break; |
| 1267 | ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength); |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1268 | return; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1269 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1270 | case USB_REQ_SET_ADDRESS: |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1271 | /* Status phase from udc */ |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1272 | if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
| 1273 | | USB_RECIP_DEVICE)) |
| 1274 | break; |
| 1275 | ch9setaddress(udc, wValue, wIndex, wLength); |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1276 | return; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1277 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1278 | case USB_REQ_CLEAR_FEATURE: |
| 1279 | case USB_REQ_SET_FEATURE: |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1280 | /* Status phase from udc */ |
| 1281 | { |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1282 | int rc = -EOPNOTSUPP; |
| 1283 | |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1284 | if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK)) |
| 1285 | == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) { |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1286 | int pipe = get_pipe_by_windex(wIndex); |
| 1287 | struct fsl_ep *ep; |
| 1288 | |
| 1289 | if (wValue != 0 || wLength != 0 || pipe > udc->max_ep) |
| 1290 | break; |
| 1291 | ep = get_ep_by_pipe(udc, pipe); |
| 1292 | |
| 1293 | spin_unlock(&udc->lock); |
| 1294 | rc = fsl_ep_set_halt(&ep->ep, |
| 1295 | (setup->bRequest == USB_REQ_SET_FEATURE) |
| 1296 | ? 1 : 0); |
| 1297 | spin_lock(&udc->lock); |
| 1298 | |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1299 | } else if ((setup->bRequestType & (USB_RECIP_MASK |
| 1300 | | USB_TYPE_MASK)) == (USB_RECIP_DEVICE |
| 1301 | | USB_TYPE_STANDARD)) { |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1302 | /* Note: The driver has not include OTG support yet. |
| 1303 | * This will be set when OTG support is added */ |
Peter Korsgaard | 3bf4468 | 2007-12-21 08:33:46 -0800 | [diff] [blame] | 1304 | if (!gadget_is_otg(&udc->gadget)) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1305 | break; |
| 1306 | else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) |
| 1307 | udc->gadget.b_hnp_enable = 1; |
| 1308 | else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) |
| 1309 | udc->gadget.a_hnp_support = 1; |
| 1310 | else if (setup->bRequest == |
| 1311 | USB_DEVICE_A_ALT_HNP_SUPPORT) |
| 1312 | udc->gadget.a_alt_hnp_support = 1; |
David Brownell | a4e3ef5 | 2007-08-01 23:58:22 -0700 | [diff] [blame] | 1313 | else |
| 1314 | break; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1315 | rc = 0; |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1316 | } else |
| 1317 | break; |
| 1318 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1319 | if (rc == 0) { |
| 1320 | if (ep0_prime_status(udc, EP_DIR_IN)) |
| 1321 | ep0stall(udc); |
| 1322 | } |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1323 | return; |
| 1324 | } |
| 1325 | |
| 1326 | default: |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1327 | break; |
| 1328 | } |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1329 | |
Li Yang | 39d1f8c | 2007-08-17 08:36:44 -0700 | [diff] [blame] | 1330 | /* Requests handled by gadget */ |
| 1331 | if (wLength) { |
| 1332 | /* Data phase from gadget, status phase from udc */ |
| 1333 | udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) |
| 1334 | ? USB_DIR_IN : USB_DIR_OUT; |
| 1335 | spin_unlock(&udc->lock); |
| 1336 | if (udc->driver->setup(&udc->gadget, |
| 1337 | &udc->local_setup_buff) < 0) |
| 1338 | ep0stall(udc); |
| 1339 | spin_lock(&udc->lock); |
| 1340 | udc->ep0_state = (setup->bRequestType & USB_DIR_IN) |
| 1341 | ? DATA_STATE_XMIT : DATA_STATE_RECV; |
| 1342 | } else { |
| 1343 | /* No data phase, IN status from gadget */ |
| 1344 | udc->ep0_dir = USB_DIR_IN; |
| 1345 | spin_unlock(&udc->lock); |
| 1346 | if (udc->driver->setup(&udc->gadget, |
| 1347 | &udc->local_setup_buff) < 0) |
| 1348 | ep0stall(udc); |
| 1349 | spin_lock(&udc->lock); |
| 1350 | udc->ep0_state = WAIT_FOR_OUT_STATUS; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1351 | } |
| 1352 | } |
| 1353 | |
| 1354 | /* Process request for Data or Status phase of ep0 |
| 1355 | * prime status phase if needed */ |
| 1356 | static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0, |
| 1357 | struct fsl_req *req) |
| 1358 | { |
| 1359 | if (udc->usb_state == USB_STATE_ADDRESS) { |
| 1360 | /* Set the new address */ |
| 1361 | u32 new_address = (u32) udc->device_address; |
| 1362 | fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS, |
| 1363 | &dr_regs->deviceaddr); |
| 1364 | } |
| 1365 | |
| 1366 | done(ep0, req, 0); |
| 1367 | |
| 1368 | switch (udc->ep0_state) { |
| 1369 | case DATA_STATE_XMIT: |
| 1370 | /* receive status phase */ |
| 1371 | if (ep0_prime_status(udc, EP_DIR_OUT)) |
| 1372 | ep0stall(udc); |
| 1373 | break; |
| 1374 | case DATA_STATE_RECV: |
| 1375 | /* send status phase */ |
| 1376 | if (ep0_prime_status(udc, EP_DIR_IN)) |
| 1377 | ep0stall(udc); |
| 1378 | break; |
| 1379 | case WAIT_FOR_OUT_STATUS: |
| 1380 | udc->ep0_state = WAIT_FOR_SETUP; |
| 1381 | break; |
| 1382 | case WAIT_FOR_SETUP: |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 1383 | ERR("Unexpect ep0 packets\n"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1384 | break; |
| 1385 | default: |
| 1386 | ep0stall(udc); |
| 1387 | break; |
| 1388 | } |
| 1389 | } |
| 1390 | |
| 1391 | /* Tripwire mechanism to ensure a setup packet payload is extracted without |
| 1392 | * being corrupted by another incoming setup packet */ |
| 1393 | static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr) |
| 1394 | { |
| 1395 | u32 temp; |
| 1396 | struct ep_queue_head *qh; |
| 1397 | |
| 1398 | qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT]; |
| 1399 | |
| 1400 | /* Clear bit in ENDPTSETUPSTAT */ |
| 1401 | temp = fsl_readl(&dr_regs->endptsetupstat); |
| 1402 | fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat); |
| 1403 | |
| 1404 | /* while a hazard exists when setup package arrives */ |
| 1405 | do { |
| 1406 | /* Set Setup Tripwire */ |
| 1407 | temp = fsl_readl(&dr_regs->usbcmd); |
| 1408 | fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd); |
| 1409 | |
| 1410 | /* Copy the setup packet to local buffer */ |
| 1411 | memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8); |
| 1412 | } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW)); |
| 1413 | |
| 1414 | /* Clear Setup Tripwire */ |
| 1415 | temp = fsl_readl(&dr_regs->usbcmd); |
| 1416 | fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd); |
| 1417 | } |
| 1418 | |
| 1419 | /* process-ep_req(): free the completed Tds for this req */ |
| 1420 | static int process_ep_req(struct fsl_udc *udc, int pipe, |
| 1421 | struct fsl_req *curr_req) |
| 1422 | { |
| 1423 | struct ep_td_struct *curr_td; |
| 1424 | int td_complete, actual, remaining_length, j, tmp; |
| 1425 | int status = 0; |
| 1426 | int errors = 0; |
| 1427 | struct ep_queue_head *curr_qh = &udc->ep_qh[pipe]; |
| 1428 | int direction = pipe % 2; |
| 1429 | |
| 1430 | curr_td = curr_req->head; |
| 1431 | td_complete = 0; |
| 1432 | actual = curr_req->req.length; |
| 1433 | |
| 1434 | for (j = 0; j < curr_req->dtd_count; j++) { |
| 1435 | remaining_length = (le32_to_cpu(curr_td->size_ioc_sts) |
| 1436 | & DTD_PACKET_SIZE) |
| 1437 | >> DTD_LENGTH_BIT_POS; |
| 1438 | actual -= remaining_length; |
| 1439 | |
| 1440 | if ((errors = le32_to_cpu(curr_td->size_ioc_sts) & |
| 1441 | DTD_ERROR_MASK)) { |
| 1442 | if (errors & DTD_STATUS_HALTED) { |
| 1443 | ERR("dTD error %08x QH=%d\n", errors, pipe); |
| 1444 | /* Clear the errors and Halt condition */ |
| 1445 | tmp = le32_to_cpu(curr_qh->size_ioc_int_sts); |
| 1446 | tmp &= ~errors; |
| 1447 | curr_qh->size_ioc_int_sts = cpu_to_le32(tmp); |
| 1448 | status = -EPIPE; |
| 1449 | /* FIXME: continue with next queued TD? */ |
| 1450 | |
| 1451 | break; |
| 1452 | } |
| 1453 | if (errors & DTD_STATUS_DATA_BUFF_ERR) { |
| 1454 | VDBG("Transfer overflow"); |
| 1455 | status = -EPROTO; |
| 1456 | break; |
| 1457 | } else if (errors & DTD_STATUS_TRANSACTION_ERR) { |
| 1458 | VDBG("ISO error"); |
| 1459 | status = -EILSEQ; |
| 1460 | break; |
| 1461 | } else |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame^] | 1462 | ERR("Unknown error has occurred (0x%x)!\n", |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1463 | errors); |
| 1464 | |
| 1465 | } else if (le32_to_cpu(curr_td->size_ioc_sts) |
| 1466 | & DTD_STATUS_ACTIVE) { |
| 1467 | VDBG("Request not complete"); |
| 1468 | status = REQ_UNCOMPLETE; |
| 1469 | return status; |
| 1470 | } else if (remaining_length) { |
| 1471 | if (direction) { |
| 1472 | VDBG("Transmit dTD remaining length not zero"); |
| 1473 | status = -EPROTO; |
| 1474 | break; |
| 1475 | } else { |
| 1476 | td_complete++; |
| 1477 | break; |
| 1478 | } |
| 1479 | } else { |
| 1480 | td_complete++; |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 1481 | VDBG("dTD transmitted successful"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1482 | } |
| 1483 | |
| 1484 | if (j != curr_req->dtd_count - 1) |
| 1485 | curr_td = (struct ep_td_struct *)curr_td->next_td_virt; |
| 1486 | } |
| 1487 | |
| 1488 | if (status) |
| 1489 | return status; |
| 1490 | |
| 1491 | curr_req->req.actual = actual; |
| 1492 | |
| 1493 | return 0; |
| 1494 | } |
| 1495 | |
| 1496 | /* Process a DTD completion interrupt */ |
| 1497 | static void dtd_complete_irq(struct fsl_udc *udc) |
| 1498 | { |
| 1499 | u32 bit_pos; |
| 1500 | int i, ep_num, direction, bit_mask, status; |
| 1501 | struct fsl_ep *curr_ep; |
| 1502 | struct fsl_req *curr_req, *temp_req; |
| 1503 | |
| 1504 | /* Clear the bits in the register */ |
| 1505 | bit_pos = fsl_readl(&dr_regs->endptcomplete); |
| 1506 | fsl_writel(bit_pos, &dr_regs->endptcomplete); |
| 1507 | |
| 1508 | if (!bit_pos) |
| 1509 | return; |
| 1510 | |
| 1511 | for (i = 0; i < udc->max_ep * 2; i++) { |
| 1512 | ep_num = i >> 1; |
| 1513 | direction = i % 2; |
| 1514 | |
| 1515 | bit_mask = 1 << (ep_num + 16 * direction); |
| 1516 | |
| 1517 | if (!(bit_pos & bit_mask)) |
| 1518 | continue; |
| 1519 | |
| 1520 | curr_ep = get_ep_by_pipe(udc, i); |
| 1521 | |
| 1522 | /* If the ep is configured */ |
| 1523 | if (curr_ep->name == NULL) { |
Arjan van de Ven | b6c6393 | 2008-07-25 01:45:52 -0700 | [diff] [blame] | 1524 | WARNING("Invalid EP?"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1525 | continue; |
| 1526 | } |
| 1527 | |
| 1528 | /* process the req queue until an uncomplete request */ |
| 1529 | list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue, |
| 1530 | queue) { |
| 1531 | status = process_ep_req(udc, i, curr_req); |
| 1532 | |
| 1533 | VDBG("status of process_ep_req= %d, ep = %d", |
| 1534 | status, ep_num); |
| 1535 | if (status == REQ_UNCOMPLETE) |
| 1536 | break; |
| 1537 | /* write back status to req */ |
| 1538 | curr_req->req.status = status; |
| 1539 | |
| 1540 | if (ep_num == 0) { |
| 1541 | ep0_req_complete(udc, curr_ep, curr_req); |
| 1542 | break; |
| 1543 | } else |
| 1544 | done(curr_ep, curr_req, status); |
| 1545 | } |
| 1546 | } |
| 1547 | } |
| 1548 | |
| 1549 | /* Process a port change interrupt */ |
| 1550 | static void port_change_irq(struct fsl_udc *udc) |
| 1551 | { |
| 1552 | u32 speed; |
| 1553 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1554 | /* Bus resetting is finished */ |
| 1555 | if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) { |
| 1556 | /* Get the speed */ |
| 1557 | speed = (fsl_readl(&dr_regs->portsc1) |
| 1558 | & PORTSCX_PORT_SPEED_MASK); |
| 1559 | switch (speed) { |
| 1560 | case PORTSCX_PORT_SPEED_HIGH: |
| 1561 | udc->gadget.speed = USB_SPEED_HIGH; |
| 1562 | break; |
| 1563 | case PORTSCX_PORT_SPEED_FULL: |
| 1564 | udc->gadget.speed = USB_SPEED_FULL; |
| 1565 | break; |
| 1566 | case PORTSCX_PORT_SPEED_LOW: |
| 1567 | udc->gadget.speed = USB_SPEED_LOW; |
| 1568 | break; |
| 1569 | default: |
| 1570 | udc->gadget.speed = USB_SPEED_UNKNOWN; |
| 1571 | break; |
| 1572 | } |
| 1573 | } |
| 1574 | |
| 1575 | /* Update USB state */ |
| 1576 | if (!udc->resume_state) |
| 1577 | udc->usb_state = USB_STATE_DEFAULT; |
| 1578 | } |
| 1579 | |
| 1580 | /* Process suspend interrupt */ |
| 1581 | static void suspend_irq(struct fsl_udc *udc) |
| 1582 | { |
| 1583 | udc->resume_state = udc->usb_state; |
| 1584 | udc->usb_state = USB_STATE_SUSPENDED; |
| 1585 | |
| 1586 | /* report suspend to the driver, serial.c does not support this */ |
| 1587 | if (udc->driver->suspend) |
| 1588 | udc->driver->suspend(&udc->gadget); |
| 1589 | } |
| 1590 | |
| 1591 | static void bus_resume(struct fsl_udc *udc) |
| 1592 | { |
| 1593 | udc->usb_state = udc->resume_state; |
| 1594 | udc->resume_state = 0; |
| 1595 | |
| 1596 | /* report resume to the driver, serial.c does not support this */ |
| 1597 | if (udc->driver->resume) |
| 1598 | udc->driver->resume(&udc->gadget); |
| 1599 | } |
| 1600 | |
| 1601 | /* Clear up all ep queues */ |
| 1602 | static int reset_queues(struct fsl_udc *udc) |
| 1603 | { |
| 1604 | u8 pipe; |
| 1605 | |
| 1606 | for (pipe = 0; pipe < udc->max_pipes; pipe++) |
| 1607 | udc_reset_ep_queue(udc, pipe); |
| 1608 | |
| 1609 | /* report disconnect; the driver is already quiesced */ |
Li Yang | 185e3de | 2008-05-29 21:04:45 +0800 | [diff] [blame] | 1610 | spin_unlock(&udc->lock); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1611 | udc->driver->disconnect(&udc->gadget); |
Li Yang | 185e3de | 2008-05-29 21:04:45 +0800 | [diff] [blame] | 1612 | spin_lock(&udc->lock); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1613 | |
| 1614 | return 0; |
| 1615 | } |
| 1616 | |
| 1617 | /* Process reset interrupt */ |
| 1618 | static void reset_irq(struct fsl_udc *udc) |
| 1619 | { |
| 1620 | u32 temp; |
| 1621 | unsigned long timeout; |
| 1622 | |
| 1623 | /* Clear the device address */ |
| 1624 | temp = fsl_readl(&dr_regs->deviceaddr); |
| 1625 | fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr); |
| 1626 | |
| 1627 | udc->device_address = 0; |
| 1628 | |
| 1629 | /* Clear usb state */ |
| 1630 | udc->resume_state = 0; |
| 1631 | udc->ep0_dir = 0; |
| 1632 | udc->ep0_state = WAIT_FOR_SETUP; |
| 1633 | udc->remote_wakeup = 0; /* default to 0 on reset */ |
| 1634 | udc->gadget.b_hnp_enable = 0; |
| 1635 | udc->gadget.a_hnp_support = 0; |
| 1636 | udc->gadget.a_alt_hnp_support = 0; |
| 1637 | |
| 1638 | /* Clear all the setup token semaphores */ |
| 1639 | temp = fsl_readl(&dr_regs->endptsetupstat); |
| 1640 | fsl_writel(temp, &dr_regs->endptsetupstat); |
| 1641 | |
| 1642 | /* Clear all the endpoint complete status bits */ |
| 1643 | temp = fsl_readl(&dr_regs->endptcomplete); |
| 1644 | fsl_writel(temp, &dr_regs->endptcomplete); |
| 1645 | |
| 1646 | timeout = jiffies + 100; |
| 1647 | while (fsl_readl(&dr_regs->endpointprime)) { |
| 1648 | /* Wait until all endptprime bits cleared */ |
| 1649 | if (time_after(jiffies, timeout)) { |
| 1650 | ERR("Timeout for reset\n"); |
| 1651 | break; |
| 1652 | } |
| 1653 | cpu_relax(); |
| 1654 | } |
| 1655 | |
| 1656 | /* Write 1s to the flush register */ |
| 1657 | fsl_writel(0xffffffff, &dr_regs->endptflush); |
| 1658 | |
| 1659 | if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) { |
| 1660 | VDBG("Bus reset"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1661 | /* Reset all the queues, include XD, dTD, EP queue |
| 1662 | * head and TR Queue */ |
| 1663 | reset_queues(udc); |
| 1664 | udc->usb_state = USB_STATE_DEFAULT; |
| 1665 | } else { |
| 1666 | VDBG("Controller reset"); |
| 1667 | /* initialize usb hw reg except for regs for EP, not |
| 1668 | * touch usbintr reg */ |
| 1669 | dr_controller_setup(udc); |
| 1670 | |
| 1671 | /* Reset all internal used Queues */ |
| 1672 | reset_queues(udc); |
| 1673 | |
| 1674 | ep0_setup(udc); |
| 1675 | |
| 1676 | /* Enable DR IRQ reg, Set Run bit, change udc state */ |
| 1677 | dr_controller_run(udc); |
| 1678 | udc->usb_state = USB_STATE_ATTACHED; |
| 1679 | } |
| 1680 | } |
| 1681 | |
| 1682 | /* |
| 1683 | * USB device controller interrupt handler |
| 1684 | */ |
| 1685 | static irqreturn_t fsl_udc_irq(int irq, void *_udc) |
| 1686 | { |
| 1687 | struct fsl_udc *udc = _udc; |
| 1688 | u32 irq_src; |
| 1689 | irqreturn_t status = IRQ_NONE; |
| 1690 | unsigned long flags; |
| 1691 | |
| 1692 | /* Disable ISR for OTG host mode */ |
| 1693 | if (udc->stopped) |
| 1694 | return IRQ_NONE; |
| 1695 | spin_lock_irqsave(&udc->lock, flags); |
| 1696 | irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr); |
| 1697 | /* Clear notification bits */ |
| 1698 | fsl_writel(irq_src, &dr_regs->usbsts); |
| 1699 | |
| 1700 | /* VDBG("irq_src [0x%8x]", irq_src); */ |
| 1701 | |
| 1702 | /* Need to resume? */ |
| 1703 | if (udc->usb_state == USB_STATE_SUSPENDED) |
| 1704 | if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0) |
| 1705 | bus_resume(udc); |
| 1706 | |
| 1707 | /* USB Interrupt */ |
| 1708 | if (irq_src & USB_STS_INT) { |
| 1709 | VDBG("Packet int"); |
| 1710 | /* Setup package, we only support ep0 as control ep */ |
| 1711 | if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) { |
| 1712 | tripwire_handler(udc, 0, |
| 1713 | (u8 *) (&udc->local_setup_buff)); |
| 1714 | setup_received_irq(udc, &udc->local_setup_buff); |
| 1715 | status = IRQ_HANDLED; |
| 1716 | } |
| 1717 | |
| 1718 | /* completion of dtd */ |
| 1719 | if (fsl_readl(&dr_regs->endptcomplete)) { |
| 1720 | dtd_complete_irq(udc); |
| 1721 | status = IRQ_HANDLED; |
| 1722 | } |
| 1723 | } |
| 1724 | |
| 1725 | /* SOF (for ISO transfer) */ |
| 1726 | if (irq_src & USB_STS_SOF) { |
| 1727 | status = IRQ_HANDLED; |
| 1728 | } |
| 1729 | |
| 1730 | /* Port Change */ |
| 1731 | if (irq_src & USB_STS_PORT_CHANGE) { |
| 1732 | port_change_irq(udc); |
| 1733 | status = IRQ_HANDLED; |
| 1734 | } |
| 1735 | |
| 1736 | /* Reset Received */ |
| 1737 | if (irq_src & USB_STS_RESET) { |
| 1738 | reset_irq(udc); |
| 1739 | status = IRQ_HANDLED; |
| 1740 | } |
| 1741 | |
| 1742 | /* Sleep Enable (Suspend) */ |
| 1743 | if (irq_src & USB_STS_SUSPEND) { |
| 1744 | suspend_irq(udc); |
| 1745 | status = IRQ_HANDLED; |
| 1746 | } |
| 1747 | |
| 1748 | if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) { |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 1749 | VDBG("Error IRQ %x", irq_src); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1750 | } |
| 1751 | |
| 1752 | spin_unlock_irqrestore(&udc->lock, flags); |
| 1753 | return status; |
| 1754 | } |
| 1755 | |
| 1756 | /*----------------------------------------------------------------* |
| 1757 | * Hook to gadget drivers |
| 1758 | * Called by initialization code of gadget drivers |
| 1759 | *----------------------------------------------------------------*/ |
Uwe Kleine-König | b0fca50 | 2010-08-12 17:43:53 +0200 | [diff] [blame] | 1760 | int usb_gadget_probe_driver(struct usb_gadget_driver *driver, |
| 1761 | int (*bind)(struct usb_gadget *)) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1762 | { |
| 1763 | int retval = -ENODEV; |
| 1764 | unsigned long flags = 0; |
| 1765 | |
| 1766 | if (!udc_controller) |
| 1767 | return -ENODEV; |
| 1768 | |
| 1769 | if (!driver || (driver->speed != USB_SPEED_FULL |
| 1770 | && driver->speed != USB_SPEED_HIGH) |
Uwe Kleine-König | b0fca50 | 2010-08-12 17:43:53 +0200 | [diff] [blame] | 1771 | || !bind || !driver->disconnect || !driver->setup) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1772 | return -EINVAL; |
| 1773 | |
| 1774 | if (udc_controller->driver) |
| 1775 | return -EBUSY; |
| 1776 | |
| 1777 | /* lock is needed but whether should use this lock or another */ |
| 1778 | spin_lock_irqsave(&udc_controller->lock, flags); |
| 1779 | |
Will Newton | 7483cff8 | 2008-08-12 15:39:09 +0100 | [diff] [blame] | 1780 | driver->driver.bus = NULL; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1781 | /* hook up the driver */ |
| 1782 | udc_controller->driver = driver; |
| 1783 | udc_controller->gadget.dev.driver = &driver->driver; |
| 1784 | spin_unlock_irqrestore(&udc_controller->lock, flags); |
| 1785 | |
| 1786 | /* bind udc driver to gadget driver */ |
Uwe Kleine-König | b0fca50 | 2010-08-12 17:43:53 +0200 | [diff] [blame] | 1787 | retval = bind(&udc_controller->gadget); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1788 | if (retval) { |
| 1789 | VDBG("bind to %s --> %d", driver->driver.name, retval); |
Will Newton | 7483cff8 | 2008-08-12 15:39:09 +0100 | [diff] [blame] | 1790 | udc_controller->gadget.dev.driver = NULL; |
| 1791 | udc_controller->driver = NULL; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1792 | goto out; |
| 1793 | } |
| 1794 | |
| 1795 | /* Enable DR IRQ reg and Set usbcmd reg Run bit */ |
| 1796 | dr_controller_run(udc_controller); |
| 1797 | udc_controller->usb_state = USB_STATE_ATTACHED; |
| 1798 | udc_controller->ep0_state = WAIT_FOR_SETUP; |
| 1799 | udc_controller->ep0_dir = 0; |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 1800 | printk(KERN_INFO "%s: bind to driver %s\n", |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1801 | udc_controller->gadget.name, driver->driver.name); |
| 1802 | |
| 1803 | out: |
| 1804 | if (retval) |
Frank Seidel | 6f8aa65 | 2009-02-05 16:16:24 +0100 | [diff] [blame] | 1805 | printk(KERN_WARNING "gadget driver register failed %d\n", |
| 1806 | retval); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1807 | return retval; |
| 1808 | } |
Uwe Kleine-König | b0fca50 | 2010-08-12 17:43:53 +0200 | [diff] [blame] | 1809 | EXPORT_SYMBOL(usb_gadget_probe_driver); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1810 | |
| 1811 | /* Disconnect from gadget driver */ |
| 1812 | int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| 1813 | { |
| 1814 | struct fsl_ep *loop_ep; |
| 1815 | unsigned long flags; |
| 1816 | |
| 1817 | if (!udc_controller) |
| 1818 | return -ENODEV; |
| 1819 | |
| 1820 | if (!driver || driver != udc_controller->driver || !driver->unbind) |
| 1821 | return -EINVAL; |
| 1822 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1823 | if (udc_controller->transceiver) |
Will Newton | 7483cff8 | 2008-08-12 15:39:09 +0100 | [diff] [blame] | 1824 | otg_set_peripheral(udc_controller->transceiver, NULL); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1825 | |
| 1826 | /* stop DR, disable intr */ |
| 1827 | dr_controller_stop(udc_controller); |
| 1828 | |
| 1829 | /* in fact, no needed */ |
| 1830 | udc_controller->usb_state = USB_STATE_ATTACHED; |
| 1831 | udc_controller->ep0_state = WAIT_FOR_SETUP; |
| 1832 | udc_controller->ep0_dir = 0; |
| 1833 | |
| 1834 | /* stand operation */ |
| 1835 | spin_lock_irqsave(&udc_controller->lock, flags); |
| 1836 | udc_controller->gadget.speed = USB_SPEED_UNKNOWN; |
| 1837 | nuke(&udc_controller->eps[0], -ESHUTDOWN); |
| 1838 | list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list, |
| 1839 | ep.ep_list) |
| 1840 | nuke(loop_ep, -ESHUTDOWN); |
| 1841 | spin_unlock_irqrestore(&udc_controller->lock, flags); |
| 1842 | |
Anton Vorontsov | 1f15a50 | 2008-11-13 15:00:46 +0300 | [diff] [blame] | 1843 | /* report disconnect; the controller is already quiesced */ |
| 1844 | driver->disconnect(&udc_controller->gadget); |
| 1845 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1846 | /* unbind gadget and unhook driver. */ |
| 1847 | driver->unbind(&udc_controller->gadget); |
Will Newton | 7483cff8 | 2008-08-12 15:39:09 +0100 | [diff] [blame] | 1848 | udc_controller->gadget.dev.driver = NULL; |
| 1849 | udc_controller->driver = NULL; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1850 | |
Frank Seidel | 6f8aa65 | 2009-02-05 16:16:24 +0100 | [diff] [blame] | 1851 | printk(KERN_WARNING "unregistered gadget driver '%s'\n", |
| 1852 | driver->driver.name); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1853 | return 0; |
| 1854 | } |
| 1855 | EXPORT_SYMBOL(usb_gadget_unregister_driver); |
| 1856 | |
| 1857 | /*------------------------------------------------------------------------- |
| 1858 | PROC File System Support |
| 1859 | -------------------------------------------------------------------------*/ |
| 1860 | #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| 1861 | |
| 1862 | #include <linux/seq_file.h> |
| 1863 | |
| 1864 | static const char proc_filename[] = "driver/fsl_usb2_udc"; |
| 1865 | |
| 1866 | static int fsl_proc_read(char *page, char **start, off_t off, int count, |
| 1867 | int *eof, void *_dev) |
| 1868 | { |
| 1869 | char *buf = page; |
| 1870 | char *next = buf; |
| 1871 | unsigned size = count; |
| 1872 | unsigned long flags; |
| 1873 | int t, i; |
| 1874 | u32 tmp_reg; |
| 1875 | struct fsl_ep *ep = NULL; |
| 1876 | struct fsl_req *req; |
| 1877 | |
| 1878 | struct fsl_udc *udc = udc_controller; |
| 1879 | if (off != 0) |
| 1880 | return 0; |
| 1881 | |
| 1882 | spin_lock_irqsave(&udc->lock, flags); |
| 1883 | |
Joe Perches | dc0d5c1 | 2007-12-17 11:40:18 -0800 | [diff] [blame] | 1884 | /* ------basic driver information ---- */ |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1885 | t = scnprintf(next, size, |
| 1886 | DRIVER_DESC "\n" |
| 1887 | "%s version: %s\n" |
| 1888 | "Gadget driver: %s\n\n", |
| 1889 | driver_name, DRIVER_VERSION, |
| 1890 | udc->driver ? udc->driver->driver.name : "(none)"); |
| 1891 | size -= t; |
| 1892 | next += t; |
| 1893 | |
| 1894 | /* ------ DR Registers ----- */ |
| 1895 | tmp_reg = fsl_readl(&dr_regs->usbcmd); |
| 1896 | t = scnprintf(next, size, |
| 1897 | "USBCMD reg:\n" |
| 1898 | "SetupTW: %d\n" |
| 1899 | "Run/Stop: %s\n\n", |
| 1900 | (tmp_reg & USB_CMD_SUTW) ? 1 : 0, |
| 1901 | (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop"); |
| 1902 | size -= t; |
| 1903 | next += t; |
| 1904 | |
| 1905 | tmp_reg = fsl_readl(&dr_regs->usbsts); |
| 1906 | t = scnprintf(next, size, |
| 1907 | "USB Status Reg:\n" |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1908 | "Dr Suspend: %d Reset Received: %d System Error: %s " |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1909 | "USB Error Interrupt: %s\n\n", |
| 1910 | (tmp_reg & USB_STS_SUSPEND) ? 1 : 0, |
| 1911 | (tmp_reg & USB_STS_RESET) ? 1 : 0, |
| 1912 | (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal", |
| 1913 | (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err"); |
| 1914 | size -= t; |
| 1915 | next += t; |
| 1916 | |
| 1917 | tmp_reg = fsl_readl(&dr_regs->usbintr); |
| 1918 | t = scnprintf(next, size, |
| 1919 | "USB Intrrupt Enable Reg:\n" |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1920 | "Sleep Enable: %d SOF Received Enable: %d " |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1921 | "Reset Enable: %d\n" |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1922 | "System Error Enable: %d " |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1923 | "Port Change Dectected Enable: %d\n" |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1924 | "USB Error Intr Enable: %d USB Intr Enable: %d\n\n", |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1925 | (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0, |
| 1926 | (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0, |
| 1927 | (tmp_reg & USB_INTR_RESET_EN) ? 1 : 0, |
| 1928 | (tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0, |
| 1929 | (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0, |
| 1930 | (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0, |
| 1931 | (tmp_reg & USB_INTR_INT_EN) ? 1 : 0); |
| 1932 | size -= t; |
| 1933 | next += t; |
| 1934 | |
| 1935 | tmp_reg = fsl_readl(&dr_regs->frindex); |
| 1936 | t = scnprintf(next, size, |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1937 | "USB Frame Index Reg: Frame Number is 0x%x\n\n", |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1938 | (tmp_reg & USB_FRINDEX_MASKS)); |
| 1939 | size -= t; |
| 1940 | next += t; |
| 1941 | |
| 1942 | tmp_reg = fsl_readl(&dr_regs->deviceaddr); |
| 1943 | t = scnprintf(next, size, |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1944 | "USB Device Address Reg: Device Addr is 0x%x\n\n", |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1945 | (tmp_reg & USB_DEVICE_ADDRESS_MASK)); |
| 1946 | size -= t; |
| 1947 | next += t; |
| 1948 | |
| 1949 | tmp_reg = fsl_readl(&dr_regs->endpointlistaddr); |
| 1950 | t = scnprintf(next, size, |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1951 | "USB Endpoint List Address Reg: " |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1952 | "Device Addr is 0x%x\n\n", |
| 1953 | (tmp_reg & USB_EP_LIST_ADDRESS_MASK)); |
| 1954 | size -= t; |
| 1955 | next += t; |
| 1956 | |
| 1957 | tmp_reg = fsl_readl(&dr_regs->portsc1); |
| 1958 | t = scnprintf(next, size, |
| 1959 | "USB Port Status&Control Reg:\n" |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1960 | "Port Transceiver Type : %s Port Speed: %s\n" |
| 1961 | "PHY Low Power Suspend: %s Port Reset: %s " |
| 1962 | "Port Suspend Mode: %s\n" |
| 1963 | "Over-current Change: %s " |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1964 | "Port Enable/Disable Change: %s\n" |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 1965 | "Port Enabled/Disabled: %s " |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 1966 | "Current Connect Status: %s\n\n", ( { |
| 1967 | char *s; |
| 1968 | switch (tmp_reg & PORTSCX_PTS_FSLS) { |
| 1969 | case PORTSCX_PTS_UTMI: |
| 1970 | s = "UTMI"; break; |
| 1971 | case PORTSCX_PTS_ULPI: |
| 1972 | s = "ULPI "; break; |
| 1973 | case PORTSCX_PTS_FSLS: |
| 1974 | s = "FS/LS Serial"; break; |
| 1975 | default: |
| 1976 | s = "None"; break; |
| 1977 | } |
| 1978 | s;} ), ( { |
| 1979 | char *s; |
| 1980 | switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) { |
| 1981 | case PORTSCX_PORT_SPEED_FULL: |
| 1982 | s = "Full Speed"; break; |
| 1983 | case PORTSCX_PORT_SPEED_LOW: |
| 1984 | s = "Low Speed"; break; |
| 1985 | case PORTSCX_PORT_SPEED_HIGH: |
| 1986 | s = "High Speed"; break; |
| 1987 | default: |
| 1988 | s = "Undefined"; break; |
| 1989 | } |
| 1990 | s; |
| 1991 | } ), |
| 1992 | (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ? |
| 1993 | "Normal PHY mode" : "Low power mode", |
| 1994 | (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" : |
| 1995 | "Not in Reset", |
| 1996 | (tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in", |
| 1997 | (tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" : |
| 1998 | "No", |
| 1999 | (tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" : |
| 2000 | "Not change", |
| 2001 | (tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" : |
| 2002 | "Not correct", |
| 2003 | (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ? |
| 2004 | "Attached" : "Not-Att"); |
| 2005 | size -= t; |
| 2006 | next += t; |
| 2007 | |
| 2008 | tmp_reg = fsl_readl(&dr_regs->usbmode); |
| 2009 | t = scnprintf(next, size, |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 2010 | "USB Mode Reg: Controller Mode is: %s\n\n", ( { |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2011 | char *s; |
| 2012 | switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) { |
| 2013 | case USB_MODE_CTRL_MODE_IDLE: |
| 2014 | s = "Idle"; break; |
| 2015 | case USB_MODE_CTRL_MODE_DEVICE: |
| 2016 | s = "Device Controller"; break; |
| 2017 | case USB_MODE_CTRL_MODE_HOST: |
| 2018 | s = "Host Controller"; break; |
| 2019 | default: |
| 2020 | s = "None"; break; |
| 2021 | } |
| 2022 | s; |
| 2023 | } )); |
| 2024 | size -= t; |
| 2025 | next += t; |
| 2026 | |
| 2027 | tmp_reg = fsl_readl(&dr_regs->endptsetupstat); |
| 2028 | t = scnprintf(next, size, |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 2029 | "Endpoint Setup Status Reg: SETUP on ep 0x%x\n\n", |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2030 | (tmp_reg & EP_SETUP_STATUS_MASK)); |
| 2031 | size -= t; |
| 2032 | next += t; |
| 2033 | |
| 2034 | for (i = 0; i < udc->max_ep / 2; i++) { |
| 2035 | tmp_reg = fsl_readl(&dr_regs->endptctrl[i]); |
| 2036 | t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n", |
| 2037 | i, tmp_reg); |
| 2038 | size -= t; |
| 2039 | next += t; |
| 2040 | } |
| 2041 | tmp_reg = fsl_readl(&dr_regs->endpointprime); |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 2042 | t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n\n", tmp_reg); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2043 | size -= t; |
| 2044 | next += t; |
| 2045 | |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 2046 | #ifndef CONFIG_ARCH_MXC |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2047 | tmp_reg = usb_sys_regs->snoop1; |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 2048 | t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2049 | size -= t; |
| 2050 | next += t; |
| 2051 | |
| 2052 | tmp_reg = usb_sys_regs->control; |
| 2053 | t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n", |
| 2054 | tmp_reg); |
| 2055 | size -= t; |
| 2056 | next += t; |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 2057 | #endif |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2058 | |
| 2059 | /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */ |
| 2060 | ep = &udc->eps[0]; |
| 2061 | t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n", |
| 2062 | ep->ep.name, ep_maxpacket(ep), ep_index(ep)); |
| 2063 | size -= t; |
| 2064 | next += t; |
| 2065 | |
| 2066 | if (list_empty(&ep->queue)) { |
| 2067 | t = scnprintf(next, size, "its req queue is empty\n\n"); |
| 2068 | size -= t; |
| 2069 | next += t; |
| 2070 | } else { |
| 2071 | list_for_each_entry(req, &ep->queue, queue) { |
| 2072 | t = scnprintf(next, size, |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 2073 | "req %p actual 0x%x length 0x%x buf %p\n", |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2074 | &req->req, req->req.actual, |
| 2075 | req->req.length, req->req.buf); |
| 2076 | size -= t; |
| 2077 | next += t; |
| 2078 | } |
| 2079 | } |
| 2080 | /* other gadget->eplist ep */ |
| 2081 | list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { |
| 2082 | if (ep->desc) { |
| 2083 | t = scnprintf(next, size, |
| 2084 | "\nFor %s Maxpkt is 0x%x " |
| 2085 | "index is 0x%x\n", |
| 2086 | ep->ep.name, ep_maxpacket(ep), |
| 2087 | ep_index(ep)); |
| 2088 | size -= t; |
| 2089 | next += t; |
| 2090 | |
| 2091 | if (list_empty(&ep->queue)) { |
| 2092 | t = scnprintf(next, size, |
| 2093 | "its req queue is empty\n\n"); |
| 2094 | size -= t; |
| 2095 | next += t; |
| 2096 | } else { |
| 2097 | list_for_each_entry(req, &ep->queue, queue) { |
| 2098 | t = scnprintf(next, size, |
Will Newton | 9d9d88c | 2008-08-12 15:39:11 +0100 | [diff] [blame] | 2099 | "req %p actual 0x%x length " |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2100 | "0x%x buf %p\n", |
| 2101 | &req->req, req->req.actual, |
| 2102 | req->req.length, req->req.buf); |
| 2103 | size -= t; |
| 2104 | next += t; |
| 2105 | } /* end for each_entry of ep req */ |
| 2106 | } /* end for else */ |
| 2107 | } /* end for if(ep->queue) */ |
| 2108 | } /* end (ep->desc) */ |
| 2109 | |
| 2110 | spin_unlock_irqrestore(&udc->lock, flags); |
| 2111 | |
| 2112 | *eof = 1; |
| 2113 | return count - size; |
| 2114 | } |
| 2115 | |
| 2116 | #define create_proc_file() create_proc_read_entry(proc_filename, \ |
| 2117 | 0, NULL, fsl_proc_read, NULL) |
| 2118 | |
| 2119 | #define remove_proc_file() remove_proc_entry(proc_filename, NULL) |
| 2120 | |
| 2121 | #else /* !CONFIG_USB_GADGET_DEBUG_FILES */ |
| 2122 | |
| 2123 | #define create_proc_file() do {} while (0) |
| 2124 | #define remove_proc_file() do {} while (0) |
| 2125 | |
| 2126 | #endif /* CONFIG_USB_GADGET_DEBUG_FILES */ |
| 2127 | |
| 2128 | /*-------------------------------------------------------------------------*/ |
| 2129 | |
| 2130 | /* Release udc structures */ |
| 2131 | static void fsl_udc_release(struct device *dev) |
| 2132 | { |
| 2133 | complete(udc_controller->done); |
Anton Vorontsov | 37c4fd8 | 2009-10-29 19:50:43 +0300 | [diff] [blame] | 2134 | dma_free_coherent(dev->parent, udc_controller->ep_qh_size, |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2135 | udc_controller->ep_qh, udc_controller->ep_qh_dma); |
| 2136 | kfree(udc_controller); |
| 2137 | } |
| 2138 | |
| 2139 | /****************************************************************** |
| 2140 | Internal structure setup functions |
| 2141 | *******************************************************************/ |
| 2142 | /*------------------------------------------------------------------ |
| 2143 | * init resource for globle controller |
| 2144 | * Return the udc handle on success or NULL on failure |
| 2145 | ------------------------------------------------------------------*/ |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2146 | static int __init struct_udc_setup(struct fsl_udc *udc, |
| 2147 | struct platform_device *pdev) |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2148 | { |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2149 | struct fsl_usb2_platform_data *pdata; |
| 2150 | size_t size; |
| 2151 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2152 | pdata = pdev->dev.platform_data; |
| 2153 | udc->phy_mode = pdata->phy_mode; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2154 | |
| 2155 | udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL); |
| 2156 | if (!udc->eps) { |
| 2157 | ERR("malloc fsl_ep failed\n"); |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2158 | return -1; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2159 | } |
| 2160 | |
| 2161 | /* initialized QHs, take care of alignment */ |
| 2162 | size = udc->max_ep * sizeof(struct ep_queue_head); |
| 2163 | if (size < QH_ALIGNMENT) |
| 2164 | size = QH_ALIGNMENT; |
| 2165 | else if ((size % QH_ALIGNMENT) != 0) { |
| 2166 | size += QH_ALIGNMENT + 1; |
| 2167 | size &= ~(QH_ALIGNMENT - 1); |
| 2168 | } |
| 2169 | udc->ep_qh = dma_alloc_coherent(&pdev->dev, size, |
| 2170 | &udc->ep_qh_dma, GFP_KERNEL); |
| 2171 | if (!udc->ep_qh) { |
| 2172 | ERR("malloc QHs for udc failed\n"); |
| 2173 | kfree(udc->eps); |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2174 | return -1; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2175 | } |
| 2176 | |
| 2177 | udc->ep_qh_size = size; |
| 2178 | |
| 2179 | /* Initialize ep0 status request structure */ |
| 2180 | /* FIXME: fsl_alloc_request() ignores ep argument */ |
| 2181 | udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL), |
| 2182 | struct fsl_req, req); |
| 2183 | /* allocate a small amount of memory to get valid address */ |
| 2184 | udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); |
| 2185 | udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); |
| 2186 | |
| 2187 | udc->resume_state = USB_STATE_NOTATTACHED; |
| 2188 | udc->usb_state = USB_STATE_POWERED; |
| 2189 | udc->ep0_dir = 0; |
| 2190 | udc->remote_wakeup = 0; /* default to 0 on reset */ |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2191 | |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2192 | return 0; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2193 | } |
| 2194 | |
| 2195 | /*---------------------------------------------------------------- |
| 2196 | * Setup the fsl_ep struct for eps |
| 2197 | * Link fsl_ep->ep to gadget->ep_list |
| 2198 | * ep0out is not used so do nothing here |
| 2199 | * ep0in should be taken care |
| 2200 | *--------------------------------------------------------------*/ |
| 2201 | static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index, |
| 2202 | char *name, int link) |
| 2203 | { |
| 2204 | struct fsl_ep *ep = &udc->eps[index]; |
| 2205 | |
| 2206 | ep->udc = udc; |
| 2207 | strcpy(ep->name, name); |
| 2208 | ep->ep.name = ep->name; |
| 2209 | |
| 2210 | ep->ep.ops = &fsl_ep_ops; |
| 2211 | ep->stopped = 0; |
| 2212 | |
| 2213 | /* for ep0: maxP defined in desc |
| 2214 | * for other eps, maxP is set by epautoconfig() called by gadget layer |
| 2215 | */ |
| 2216 | ep->ep.maxpacket = (unsigned short) ~0; |
| 2217 | |
| 2218 | /* the queue lists any req for this ep */ |
| 2219 | INIT_LIST_HEAD(&ep->queue); |
| 2220 | |
| 2221 | /* gagdet.ep_list used for ep_autoconfig so no ep0 */ |
| 2222 | if (link) |
| 2223 | list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); |
| 2224 | ep->gadget = &udc->gadget; |
| 2225 | ep->qh = &udc->ep_qh[index]; |
| 2226 | |
| 2227 | return 0; |
| 2228 | } |
| 2229 | |
| 2230 | /* Driver probe function |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2231 | * all intialization operations implemented here except enabling usb_intr reg |
| 2232 | * board setup should have been done in the platform code |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2233 | */ |
| 2234 | static int __init fsl_udc_probe(struct platform_device *pdev) |
| 2235 | { |
| 2236 | struct resource *res; |
| 2237 | int ret = -ENODEV; |
| 2238 | unsigned int i; |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2239 | u32 dccparams; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2240 | |
| 2241 | if (strcmp(pdev->name, driver_name)) { |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 2242 | VDBG("Wrong device"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2243 | return -ENODEV; |
| 2244 | } |
| 2245 | |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2246 | udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); |
| 2247 | if (udc_controller == NULL) { |
| 2248 | ERR("malloc udc failed\n"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2249 | return -ENOMEM; |
| 2250 | } |
| 2251 | |
Will Newton | e06da9a | 2008-08-12 15:39:12 +0100 | [diff] [blame] | 2252 | spin_lock_init(&udc_controller->lock); |
| 2253 | udc_controller->stopped = 1; |
| 2254 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2255 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2256 | if (!res) { |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2257 | ret = -ENXIO; |
| 2258 | goto err_kfree; |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2259 | } |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2260 | |
| 2261 | if (!request_mem_region(res->start, res->end - res->start + 1, |
| 2262 | driver_name)) { |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 2263 | ERR("request mem region for %s failed\n", pdev->name); |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2264 | ret = -EBUSY; |
| 2265 | goto err_kfree; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2266 | } |
| 2267 | |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 2268 | dr_regs = ioremap(res->start, resource_size(res)); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2269 | if (!dr_regs) { |
| 2270 | ret = -ENOMEM; |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2271 | goto err_release_mem_region; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2272 | } |
| 2273 | |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 2274 | #ifndef CONFIG_ARCH_MXC |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2275 | usb_sys_regs = (struct usb_sys_interface *) |
| 2276 | ((u32)dr_regs + USB_DR_SYS_OFFSET); |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 2277 | #endif |
| 2278 | |
| 2279 | /* Initialize USB clocks */ |
| 2280 | ret = fsl_udc_clk_init(pdev); |
| 2281 | if (ret < 0) |
| 2282 | goto err_iounmap_noclk; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2283 | |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2284 | /* Read Device Controller Capability Parameters register */ |
| 2285 | dccparams = fsl_readl(&dr_regs->dccparams); |
| 2286 | if (!(dccparams & DCCPARAMS_DC)) { |
| 2287 | ERR("This SOC doesn't support device role\n"); |
| 2288 | ret = -ENODEV; |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2289 | goto err_iounmap; |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2290 | } |
| 2291 | /* Get max device endpoints */ |
| 2292 | /* DEN is bidirectional ep number, max_ep doubles the number */ |
| 2293 | udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2; |
| 2294 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2295 | udc_controller->irq = platform_get_irq(pdev, 0); |
| 2296 | if (!udc_controller->irq) { |
| 2297 | ret = -ENODEV; |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2298 | goto err_iounmap; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2299 | } |
| 2300 | |
Li Yang | 37b5453 | 2007-06-07 16:07:18 +0800 | [diff] [blame] | 2301 | ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED, |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2302 | driver_name, udc_controller); |
| 2303 | if (ret != 0) { |
Will Newton | bf7409a | 2008-08-12 15:39:10 +0100 | [diff] [blame] | 2304 | ERR("cannot request irq %d err %d\n", |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2305 | udc_controller->irq, ret); |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2306 | goto err_iounmap; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2307 | } |
| 2308 | |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2309 | /* Initialize the udc structure including QH member and other member */ |
| 2310 | if (struct_udc_setup(udc_controller, pdev)) { |
| 2311 | ERR("Can't initialize udc data structure\n"); |
| 2312 | ret = -ENOMEM; |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2313 | goto err_free_irq; |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2314 | } |
| 2315 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2316 | /* initialize usb hw reg except for regs for EP, |
| 2317 | * leave usbintr reg untouched */ |
| 2318 | dr_controller_setup(udc_controller); |
| 2319 | |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 2320 | fsl_udc_clk_finalize(pdev); |
| 2321 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2322 | /* Setup gadget structure */ |
| 2323 | udc_controller->gadget.ops = &fsl_gadget_ops; |
| 2324 | udc_controller->gadget.is_dualspeed = 1; |
| 2325 | udc_controller->gadget.ep0 = &udc_controller->eps[0].ep; |
| 2326 | INIT_LIST_HEAD(&udc_controller->gadget.ep_list); |
| 2327 | udc_controller->gadget.speed = USB_SPEED_UNKNOWN; |
| 2328 | udc_controller->gadget.name = driver_name; |
| 2329 | |
| 2330 | /* Setup gadget.dev and register with kernel */ |
Kay Sievers | 0031a06 | 2008-05-02 06:02:41 +0200 | [diff] [blame] | 2331 | dev_set_name(&udc_controller->gadget.dev, "gadget"); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2332 | udc_controller->gadget.dev.release = fsl_udc_release; |
| 2333 | udc_controller->gadget.dev.parent = &pdev->dev; |
| 2334 | ret = device_register(&udc_controller->gadget.dev); |
| 2335 | if (ret < 0) |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2336 | goto err_free_irq; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2337 | |
| 2338 | /* setup QH and epctrl for ep0 */ |
| 2339 | ep0_setup(udc_controller); |
| 2340 | |
| 2341 | /* setup udc->eps[] for ep0 */ |
| 2342 | struct_ep_setup(udc_controller, 0, "ep0", 0); |
| 2343 | /* for ep0: the desc defined here; |
| 2344 | * for other eps, gadget layer called ep_enable with defined desc |
| 2345 | */ |
| 2346 | udc_controller->eps[0].desc = &fsl_ep0_desc; |
| 2347 | udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD; |
| 2348 | |
| 2349 | /* setup the udc->eps[] for non-control endpoints and link |
| 2350 | * to gadget.ep_list */ |
| 2351 | for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) { |
| 2352 | char name[14]; |
| 2353 | |
| 2354 | sprintf(name, "ep%dout", i); |
| 2355 | struct_ep_setup(udc_controller, i * 2, name, 1); |
| 2356 | sprintf(name, "ep%din", i); |
| 2357 | struct_ep_setup(udc_controller, i * 2 + 1, name, 1); |
| 2358 | } |
| 2359 | |
| 2360 | /* use dma_pool for TD management */ |
| 2361 | udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev, |
| 2362 | sizeof(struct ep_td_struct), |
| 2363 | DTD_ALIGNMENT, UDC_DMA_BOUNDARY); |
| 2364 | if (udc_controller->td_pool == NULL) { |
| 2365 | ret = -ENOMEM; |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2366 | goto err_unregister; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2367 | } |
| 2368 | create_proc_file(); |
| 2369 | return 0; |
| 2370 | |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2371 | err_unregister: |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2372 | device_unregister(&udc_controller->gadget.dev); |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2373 | err_free_irq: |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2374 | free_irq(udc_controller->irq, udc_controller); |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2375 | err_iounmap: |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 2376 | fsl_udc_clk_release(); |
| 2377 | err_iounmap_noclk: |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2378 | iounmap(dr_regs); |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2379 | err_release_mem_region: |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2380 | release_mem_region(res->start, res->end - res->start + 1); |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2381 | err_kfree: |
Li Yang | 4365831 | 2007-06-06 21:13:44 -0700 | [diff] [blame] | 2382 | kfree(udc_controller); |
Will Newton | 23d7cd0 | 2008-08-12 15:39:17 +0100 | [diff] [blame] | 2383 | udc_controller = NULL; |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2384 | return ret; |
| 2385 | } |
| 2386 | |
| 2387 | /* Driver removal function |
| 2388 | * Free resources and finish pending transactions |
| 2389 | */ |
| 2390 | static int __exit fsl_udc_remove(struct platform_device *pdev) |
| 2391 | { |
| 2392 | struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 2393 | |
| 2394 | DECLARE_COMPLETION(done); |
| 2395 | |
| 2396 | if (!udc_controller) |
| 2397 | return -ENODEV; |
| 2398 | udc_controller->done = &done; |
| 2399 | |
Guennadi Liakhovetski | 54e4026b | 2009-04-15 14:25:33 +0200 | [diff] [blame] | 2400 | fsl_udc_clk_release(); |
| 2401 | |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2402 | /* DR has been stopped in usb_gadget_unregister_driver() */ |
| 2403 | remove_proc_file(); |
| 2404 | |
| 2405 | /* Free allocated memory */ |
| 2406 | kfree(udc_controller->status_req->req.buf); |
| 2407 | kfree(udc_controller->status_req); |
| 2408 | kfree(udc_controller->eps); |
| 2409 | |
| 2410 | dma_pool_destroy(udc_controller->td_pool); |
| 2411 | free_irq(udc_controller->irq, udc_controller); |
| 2412 | iounmap(dr_regs); |
| 2413 | release_mem_region(res->start, res->end - res->start + 1); |
| 2414 | |
| 2415 | device_unregister(&udc_controller->gadget.dev); |
| 2416 | /* free udc --wait for the release() finished */ |
| 2417 | wait_for_completion(&done); |
| 2418 | |
| 2419 | return 0; |
| 2420 | } |
| 2421 | |
| 2422 | /*----------------------------------------------------------------- |
| 2423 | * Modify Power management attributes |
| 2424 | * Used by OTG statemachine to disable gadget temporarily |
| 2425 | -----------------------------------------------------------------*/ |
| 2426 | static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state) |
| 2427 | { |
| 2428 | dr_controller_stop(udc_controller); |
| 2429 | return 0; |
| 2430 | } |
| 2431 | |
| 2432 | /*----------------------------------------------------------------- |
| 2433 | * Invoked on USB resume. May be called in_interrupt. |
| 2434 | * Here we start the DR controller and enable the irq |
| 2435 | *-----------------------------------------------------------------*/ |
| 2436 | static int fsl_udc_resume(struct platform_device *pdev) |
| 2437 | { |
| 2438 | /* Enable DR irq reg and set controller Run */ |
| 2439 | if (udc_controller->stopped) { |
| 2440 | dr_controller_setup(udc_controller); |
| 2441 | dr_controller_run(udc_controller); |
| 2442 | } |
| 2443 | udc_controller->usb_state = USB_STATE_ATTACHED; |
| 2444 | udc_controller->ep0_state = WAIT_FOR_SETUP; |
| 2445 | udc_controller->ep0_dir = 0; |
| 2446 | return 0; |
| 2447 | } |
| 2448 | |
| 2449 | /*------------------------------------------------------------------------- |
| 2450 | Register entry point for the peripheral controller driver |
| 2451 | --------------------------------------------------------------------------*/ |
| 2452 | |
| 2453 | static struct platform_driver udc_driver = { |
| 2454 | .remove = __exit_p(fsl_udc_remove), |
| 2455 | /* these suspend and resume are not usb suspend and resume */ |
| 2456 | .suspend = fsl_udc_suspend, |
| 2457 | .resume = fsl_udc_resume, |
| 2458 | .driver = { |
| 2459 | .name = (char *)driver_name, |
| 2460 | .owner = THIS_MODULE, |
| 2461 | }, |
| 2462 | }; |
| 2463 | |
| 2464 | static int __init udc_init(void) |
| 2465 | { |
| 2466 | printk(KERN_INFO "%s (%s)\n", driver_desc, DRIVER_VERSION); |
| 2467 | return platform_driver_probe(&udc_driver, fsl_udc_probe); |
| 2468 | } |
| 2469 | |
| 2470 | module_init(udc_init); |
| 2471 | |
| 2472 | static void __exit udc_exit(void) |
| 2473 | { |
| 2474 | platform_driver_unregister(&udc_driver); |
Frank Seidel | 6f8aa65 | 2009-02-05 16:16:24 +0100 | [diff] [blame] | 2475 | printk(KERN_WARNING "%s unregistered\n", driver_desc); |
Li Yang | b504882 | 2007-04-23 10:54:25 -0700 | [diff] [blame] | 2476 | } |
| 2477 | |
| 2478 | module_exit(udc_exit); |
| 2479 | |
| 2480 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 2481 | MODULE_AUTHOR(DRIVER_AUTHOR); |
| 2482 | MODULE_LICENSE("GPL"); |
Kay Sievers | f34c32f | 2008-04-10 21:29:21 -0700 | [diff] [blame] | 2483 | MODULE_ALIAS("platform:fsl-usb2-udc"); |