Viresh KUMAR | 4a37027 | 2010-08-04 11:44:14 +0530 | [diff] [blame] | 1 | /* |
| 2 | * drivers/char/watchdog/sp805-wdt.c |
| 3 | * |
| 4 | * Watchdog driver for ARM SP805 watchdog module |
| 5 | * |
| 6 | * Copyright (C) 2010 ST Microelectronics |
| 7 | * Viresh Kumar<viresh.kumar@st.com> |
| 8 | * |
| 9 | * This file is licensed under the terms of the GNU General Public |
| 10 | * License version 2 or later. This program is licensed "as is" without any |
| 11 | * warranty of any kind, whether express or implied. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/device.h> |
| 15 | #include <linux/resource.h> |
| 16 | #include <linux/amba/bus.h> |
| 17 | #include <linux/bitops.h> |
| 18 | #include <linux/clk.h> |
| 19 | #include <linux/fs.h> |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/io.h> |
| 22 | #include <linux/ioport.h> |
| 23 | #include <linux/kernel.h> |
| 24 | #include <linux/math64.h> |
| 25 | #include <linux/miscdevice.h> |
| 26 | #include <linux/module.h> |
| 27 | #include <linux/moduleparam.h> |
| 28 | #include <linux/slab.h> |
| 29 | #include <linux/spinlock.h> |
| 30 | #include <linux/types.h> |
| 31 | #include <linux/uaccess.h> |
| 32 | #include <linux/watchdog.h> |
| 33 | |
| 34 | /* default timeout in seconds */ |
| 35 | #define DEFAULT_TIMEOUT 60 |
| 36 | |
| 37 | #define MODULE_NAME "sp805-wdt" |
| 38 | |
| 39 | /* watchdog register offsets and masks */ |
| 40 | #define WDTLOAD 0x000 |
| 41 | #define LOAD_MIN 0x00000001 |
| 42 | #define LOAD_MAX 0xFFFFFFFF |
| 43 | #define WDTVALUE 0x004 |
| 44 | #define WDTCONTROL 0x008 |
| 45 | /* control register masks */ |
| 46 | #define INT_ENABLE (1 << 0) |
| 47 | #define RESET_ENABLE (1 << 1) |
| 48 | #define WDTINTCLR 0x00C |
| 49 | #define WDTRIS 0x010 |
| 50 | #define WDTMIS 0x014 |
| 51 | #define INT_MASK (1 << 0) |
| 52 | #define WDTLOCK 0xC00 |
| 53 | #define UNLOCK 0x1ACCE551 |
| 54 | #define LOCK 0x00000001 |
| 55 | |
| 56 | /** |
| 57 | * struct sp805_wdt: sp805 wdt device structure |
| 58 | * |
| 59 | * lock: spin lock protecting dev structure and io access |
| 60 | * base: base address of wdt |
| 61 | * clk: clock structure of wdt |
| 62 | * dev: amba device structure of wdt |
| 63 | * status: current status of wdt |
| 64 | * load_val: load value to be set for current timeout |
| 65 | * timeout: current programmed timeout |
| 66 | */ |
| 67 | struct sp805_wdt { |
| 68 | spinlock_t lock; |
| 69 | void __iomem *base; |
| 70 | struct clk *clk; |
| 71 | struct amba_device *adev; |
| 72 | unsigned long status; |
| 73 | #define WDT_BUSY 0 |
| 74 | #define WDT_CAN_BE_CLOSED 1 |
| 75 | unsigned int load_val; |
| 76 | unsigned int timeout; |
| 77 | }; |
| 78 | |
| 79 | /* local variables */ |
| 80 | static struct sp805_wdt *wdt; |
| 81 | static int nowayout = WATCHDOG_NOWAYOUT; |
| 82 | |
| 83 | /* This routine finds load value that will reset system in required timout */ |
| 84 | static void wdt_setload(unsigned int timeout) |
| 85 | { |
| 86 | u64 load, rate; |
| 87 | |
| 88 | rate = clk_get_rate(wdt->clk); |
| 89 | |
| 90 | /* |
| 91 | * sp805 runs counter with given value twice, after the end of first |
| 92 | * counter it gives an interrupt and then starts counter again. If |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame^] | 93 | * interrupt already occurred then it resets the system. This is why |
Viresh KUMAR | 4a37027 | 2010-08-04 11:44:14 +0530 | [diff] [blame] | 94 | * load is half of what should be required. |
| 95 | */ |
| 96 | load = div_u64(rate, 2) * timeout - 1; |
| 97 | |
| 98 | load = (load > LOAD_MAX) ? LOAD_MAX : load; |
| 99 | load = (load < LOAD_MIN) ? LOAD_MIN : load; |
| 100 | |
| 101 | spin_lock(&wdt->lock); |
| 102 | wdt->load_val = load; |
| 103 | /* roundup timeout to closest positive integer value */ |
| 104 | wdt->timeout = div_u64((load + 1) * 2 + (rate / 2), rate); |
| 105 | spin_unlock(&wdt->lock); |
| 106 | } |
| 107 | |
| 108 | /* returns number of seconds left for reset to occur */ |
| 109 | static u32 wdt_timeleft(void) |
| 110 | { |
| 111 | u64 load, rate; |
| 112 | |
| 113 | rate = clk_get_rate(wdt->clk); |
| 114 | |
| 115 | spin_lock(&wdt->lock); |
| 116 | load = readl(wdt->base + WDTVALUE); |
| 117 | |
| 118 | /*If the interrupt is inactive then time left is WDTValue + WDTLoad. */ |
| 119 | if (!(readl(wdt->base + WDTRIS) & INT_MASK)) |
| 120 | load += wdt->load_val + 1; |
| 121 | spin_unlock(&wdt->lock); |
| 122 | |
| 123 | return div_u64(load, rate); |
| 124 | } |
| 125 | |
| 126 | /* enables watchdog timers reset */ |
| 127 | static void wdt_enable(void) |
| 128 | { |
| 129 | spin_lock(&wdt->lock); |
| 130 | |
| 131 | writel(UNLOCK, wdt->base + WDTLOCK); |
| 132 | writel(wdt->load_val, wdt->base + WDTLOAD); |
| 133 | writel(INT_MASK, wdt->base + WDTINTCLR); |
| 134 | writel(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL); |
| 135 | writel(LOCK, wdt->base + WDTLOCK); |
| 136 | |
| 137 | spin_unlock(&wdt->lock); |
| 138 | } |
| 139 | |
| 140 | /* disables watchdog timers reset */ |
| 141 | static void wdt_disable(void) |
| 142 | { |
| 143 | spin_lock(&wdt->lock); |
| 144 | |
| 145 | writel(UNLOCK, wdt->base + WDTLOCK); |
| 146 | writel(0, wdt->base + WDTCONTROL); |
| 147 | writel(0, wdt->base + WDTLOAD); |
| 148 | writel(LOCK, wdt->base + WDTLOCK); |
| 149 | |
| 150 | spin_unlock(&wdt->lock); |
| 151 | } |
| 152 | |
| 153 | static ssize_t sp805_wdt_write(struct file *file, const char *data, |
| 154 | size_t len, loff_t *ppos) |
| 155 | { |
| 156 | if (len) { |
| 157 | if (!nowayout) { |
| 158 | size_t i; |
| 159 | |
| 160 | clear_bit(WDT_CAN_BE_CLOSED, &wdt->status); |
| 161 | |
| 162 | for (i = 0; i != len; i++) { |
| 163 | char c; |
| 164 | |
| 165 | if (get_user(c, data + i)) |
| 166 | return -EFAULT; |
| 167 | /* Check for Magic Close character */ |
| 168 | if (c == 'V') { |
| 169 | set_bit(WDT_CAN_BE_CLOSED, |
| 170 | &wdt->status); |
| 171 | break; |
| 172 | } |
| 173 | } |
| 174 | } |
| 175 | wdt_enable(); |
| 176 | } |
| 177 | return len; |
| 178 | } |
| 179 | |
| 180 | static const struct watchdog_info ident = { |
| 181 | .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, |
| 182 | .identity = MODULE_NAME, |
| 183 | }; |
| 184 | |
| 185 | static long sp805_wdt_ioctl(struct file *file, unsigned int cmd, |
| 186 | unsigned long arg) |
| 187 | { |
| 188 | int ret = -ENOTTY; |
| 189 | unsigned int timeout; |
| 190 | |
| 191 | switch (cmd) { |
| 192 | case WDIOC_GETSUPPORT: |
| 193 | ret = copy_to_user((struct watchdog_info *)arg, &ident, |
| 194 | sizeof(ident)) ? -EFAULT : 0; |
| 195 | break; |
| 196 | |
| 197 | case WDIOC_GETSTATUS: |
| 198 | ret = put_user(0, (int *)arg); |
| 199 | break; |
| 200 | |
| 201 | case WDIOC_KEEPALIVE: |
| 202 | wdt_enable(); |
| 203 | ret = 0; |
| 204 | break; |
| 205 | |
| 206 | case WDIOC_SETTIMEOUT: |
| 207 | ret = get_user(timeout, (unsigned int *)arg); |
| 208 | if (ret) |
| 209 | break; |
| 210 | |
| 211 | wdt_setload(timeout); |
| 212 | |
| 213 | wdt_enable(); |
| 214 | /* Fall through */ |
| 215 | |
| 216 | case WDIOC_GETTIMEOUT: |
| 217 | ret = put_user(wdt->timeout, (unsigned int *)arg); |
| 218 | break; |
| 219 | case WDIOC_GETTIMELEFT: |
| 220 | ret = put_user(wdt_timeleft(), (unsigned int *)arg); |
| 221 | break; |
| 222 | } |
| 223 | return ret; |
| 224 | } |
| 225 | |
| 226 | static int sp805_wdt_open(struct inode *inode, struct file *file) |
| 227 | { |
| 228 | int ret = 0; |
| 229 | |
| 230 | if (test_and_set_bit(WDT_BUSY, &wdt->status)) |
| 231 | return -EBUSY; |
| 232 | |
| 233 | ret = clk_enable(wdt->clk); |
| 234 | if (ret) { |
| 235 | dev_err(&wdt->adev->dev, "clock enable fail"); |
| 236 | goto err; |
| 237 | } |
| 238 | |
| 239 | wdt_enable(); |
| 240 | |
| 241 | /* can not be closed, once enabled */ |
| 242 | clear_bit(WDT_CAN_BE_CLOSED, &wdt->status); |
| 243 | return nonseekable_open(inode, file); |
| 244 | |
| 245 | err: |
| 246 | clear_bit(WDT_BUSY, &wdt->status); |
| 247 | return ret; |
| 248 | } |
| 249 | |
| 250 | static int sp805_wdt_release(struct inode *inode, struct file *file) |
| 251 | { |
| 252 | if (!test_bit(WDT_CAN_BE_CLOSED, &wdt->status)) { |
| 253 | clear_bit(WDT_BUSY, &wdt->status); |
| 254 | dev_warn(&wdt->adev->dev, "Device closed unexpectedly\n"); |
| 255 | return 0; |
| 256 | } |
| 257 | |
| 258 | wdt_disable(); |
| 259 | clk_disable(wdt->clk); |
| 260 | clear_bit(WDT_BUSY, &wdt->status); |
| 261 | |
| 262 | return 0; |
| 263 | } |
| 264 | |
| 265 | static const struct file_operations sp805_wdt_fops = { |
| 266 | .owner = THIS_MODULE, |
| 267 | .llseek = no_llseek, |
| 268 | .write = sp805_wdt_write, |
| 269 | .unlocked_ioctl = sp805_wdt_ioctl, |
| 270 | .open = sp805_wdt_open, |
| 271 | .release = sp805_wdt_release, |
| 272 | }; |
| 273 | |
| 274 | static struct miscdevice sp805_wdt_miscdev = { |
| 275 | .minor = WATCHDOG_MINOR, |
| 276 | .name = "watchdog", |
| 277 | .fops = &sp805_wdt_fops, |
| 278 | }; |
| 279 | |
| 280 | static int __devinit |
Russell King | aa25afa | 2011-02-19 15:55:00 +0000 | [diff] [blame] | 281 | sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id) |
Viresh KUMAR | 4a37027 | 2010-08-04 11:44:14 +0530 | [diff] [blame] | 282 | { |
| 283 | int ret = 0; |
| 284 | |
| 285 | if (!request_mem_region(adev->res.start, resource_size(&adev->res), |
| 286 | "sp805_wdt")) { |
| 287 | dev_warn(&adev->dev, "Failed to get memory region resource\n"); |
| 288 | ret = -ENOENT; |
| 289 | goto err; |
| 290 | } |
| 291 | |
| 292 | wdt = kzalloc(sizeof(*wdt), GFP_KERNEL); |
| 293 | if (!wdt) { |
| 294 | dev_warn(&adev->dev, "Kzalloc failed\n"); |
| 295 | ret = -ENOMEM; |
| 296 | goto err_kzalloc; |
| 297 | } |
| 298 | |
| 299 | wdt->clk = clk_get(&adev->dev, NULL); |
| 300 | if (IS_ERR(wdt->clk)) { |
| 301 | dev_warn(&adev->dev, "Clock not found\n"); |
| 302 | ret = PTR_ERR(wdt->clk); |
| 303 | goto err_clk_get; |
| 304 | } |
| 305 | |
| 306 | wdt->base = ioremap(adev->res.start, resource_size(&adev->res)); |
| 307 | if (!wdt->base) { |
| 308 | ret = -ENOMEM; |
| 309 | dev_warn(&adev->dev, "ioremap fail\n"); |
| 310 | goto err_ioremap; |
| 311 | } |
| 312 | |
| 313 | wdt->adev = adev; |
| 314 | spin_lock_init(&wdt->lock); |
| 315 | wdt_setload(DEFAULT_TIMEOUT); |
| 316 | |
| 317 | ret = misc_register(&sp805_wdt_miscdev); |
| 318 | if (ret < 0) { |
| 319 | dev_warn(&adev->dev, "cannot register misc device\n"); |
| 320 | goto err_misc_register; |
| 321 | } |
| 322 | |
| 323 | dev_info(&adev->dev, "registration successful\n"); |
| 324 | return 0; |
| 325 | |
| 326 | err_misc_register: |
| 327 | iounmap(wdt->base); |
| 328 | err_ioremap: |
| 329 | clk_put(wdt->clk); |
| 330 | err_clk_get: |
| 331 | kfree(wdt); |
| 332 | wdt = NULL; |
| 333 | err_kzalloc: |
| 334 | release_mem_region(adev->res.start, resource_size(&adev->res)); |
| 335 | err: |
| 336 | dev_err(&adev->dev, "Probe Failed!!!\n"); |
| 337 | return ret; |
| 338 | } |
| 339 | |
| 340 | static int __devexit sp805_wdt_remove(struct amba_device *adev) |
| 341 | { |
| 342 | misc_deregister(&sp805_wdt_miscdev); |
| 343 | iounmap(wdt->base); |
| 344 | clk_put(wdt->clk); |
| 345 | kfree(wdt); |
| 346 | release_mem_region(adev->res.start, resource_size(&adev->res)); |
| 347 | |
| 348 | return 0; |
| 349 | } |
| 350 | |
| 351 | static struct amba_id sp805_wdt_ids[] __initdata = { |
| 352 | { |
| 353 | .id = 0x00141805, |
| 354 | .mask = 0x00ffffff, |
| 355 | }, |
| 356 | { 0, 0 }, |
| 357 | }; |
| 358 | |
| 359 | static struct amba_driver sp805_wdt_driver = { |
| 360 | .drv = { |
| 361 | .name = MODULE_NAME, |
| 362 | }, |
| 363 | .id_table = sp805_wdt_ids, |
| 364 | .probe = sp805_wdt_probe, |
| 365 | .remove = __devexit_p(sp805_wdt_remove), |
| 366 | }; |
| 367 | |
| 368 | static int __init sp805_wdt_init(void) |
| 369 | { |
| 370 | return amba_driver_register(&sp805_wdt_driver); |
| 371 | } |
| 372 | module_init(sp805_wdt_init); |
| 373 | |
| 374 | static void __exit sp805_wdt_exit(void) |
| 375 | { |
| 376 | amba_driver_unregister(&sp805_wdt_driver); |
| 377 | } |
| 378 | module_exit(sp805_wdt_exit); |
| 379 | |
| 380 | module_param(nowayout, int, 0); |
| 381 | MODULE_PARM_DESC(nowayout, |
| 382 | "Set to 1 to keep watchdog running after device release"); |
| 383 | |
| 384 | MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); |
| 385 | MODULE_DESCRIPTION("ARM SP805 Watchdog Driver"); |
| 386 | MODULE_LICENSE("GPL"); |
| 387 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |