Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 1 | /* |
| 2 | * 1-wire client/driver for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC |
| 3 | * |
| 4 | * Copyright (C) 2010 Indesign, LLC |
| 5 | * |
| 6 | * Author: Clifton Barnes <cabarnes@indesign-llc.com> |
| 7 | * |
| 8 | * Based on ds2760_battery and ds2782_battery drivers |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License version 2 as |
| 12 | * published by the Free Software Foundation. |
| 13 | * |
| 14 | */ |
| 15 | |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/slab.h> |
| 18 | #include <linux/param.h> |
| 19 | #include <linux/pm.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/power_supply.h> |
| 22 | #include <linux/idr.h> |
| 23 | |
| 24 | #include "../w1/w1.h" |
| 25 | #include "../w1/slaves/w1_ds2780.h" |
| 26 | |
| 27 | /* Current unit measurement in uA for a 1 milli-ohm sense resistor */ |
| 28 | #define DS2780_CURRENT_UNITS 1563 |
| 29 | /* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */ |
| 30 | #define DS2780_CHARGE_UNITS 6250 |
| 31 | /* Number of bytes in user EEPROM space */ |
| 32 | #define DS2780_USER_EEPROM_SIZE (DS2780_EEPROM_BLOCK0_END - \ |
| 33 | DS2780_EEPROM_BLOCK0_START + 1) |
| 34 | /* Number of bytes in parameter EEPROM space */ |
| 35 | #define DS2780_PARAM_EEPROM_SIZE (DS2780_EEPROM_BLOCK1_END - \ |
| 36 | DS2780_EEPROM_BLOCK1_START + 1) |
| 37 | |
| 38 | struct ds2780_device_info { |
| 39 | struct device *dev; |
| 40 | struct power_supply bat; |
| 41 | struct device *w1_dev; |
| 42 | }; |
| 43 | |
| 44 | enum current_types { |
| 45 | CURRENT_NOW, |
| 46 | CURRENT_AVG, |
| 47 | }; |
| 48 | |
| 49 | static const char model[] = "DS2780"; |
| 50 | static const char manufacturer[] = "Maxim/Dallas"; |
| 51 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 52 | static inline struct ds2780_device_info * |
| 53 | to_ds2780_device_info(struct power_supply *psy) |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 54 | { |
| 55 | return container_of(psy, struct ds2780_device_info, bat); |
| 56 | } |
| 57 | |
| 58 | static inline struct power_supply *to_power_supply(struct device *dev) |
| 59 | { |
| 60 | return dev_get_drvdata(dev); |
| 61 | } |
| 62 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 63 | static inline int ds2780_battery_io(struct ds2780_device_info *dev_info, |
| 64 | char *buf, int addr, size_t count, int io) |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 65 | { |
NeilBrown | b02f8be | 2012-05-18 15:59:52 +1000 | [diff] [blame] | 66 | return w1_ds2780_io(dev_info->w1_dev, buf, addr, count, io); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 67 | } |
| 68 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 69 | static inline int ds2780_read8(struct ds2780_device_info *dev_info, u8 *val, |
| 70 | int addr) |
| 71 | { |
| 72 | return ds2780_battery_io(dev_info, val, addr, sizeof(u8), 0); |
| 73 | } |
| 74 | |
| 75 | static int ds2780_read16(struct ds2780_device_info *dev_info, s16 *val, |
| 76 | int addr) |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 77 | { |
| 78 | int ret; |
| 79 | u8 raw[2]; |
| 80 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 81 | ret = ds2780_battery_io(dev_info, raw, addr, sizeof(raw), 0); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 82 | if (ret < 0) |
| 83 | return ret; |
| 84 | |
| 85 | *val = (raw[0] << 8) | raw[1]; |
| 86 | |
| 87 | return 0; |
| 88 | } |
| 89 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 90 | static inline int ds2780_read_block(struct ds2780_device_info *dev_info, |
| 91 | u8 *val, int addr, size_t count) |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 92 | { |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 93 | return ds2780_battery_io(dev_info, val, addr, count, 0); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 94 | } |
| 95 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 96 | static inline int ds2780_write(struct ds2780_device_info *dev_info, u8 *val, |
| 97 | int addr, size_t count) |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 98 | { |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 99 | return ds2780_battery_io(dev_info, val, addr, count, 1); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 100 | } |
| 101 | |
| 102 | static inline int ds2780_store_eeprom(struct device *dev, int addr) |
| 103 | { |
| 104 | return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_COPY_DATA); |
| 105 | } |
| 106 | |
| 107 | static inline int ds2780_recall_eeprom(struct device *dev, int addr) |
| 108 | { |
| 109 | return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_RECALL_DATA); |
| 110 | } |
| 111 | |
| 112 | static int ds2780_save_eeprom(struct ds2780_device_info *dev_info, int reg) |
| 113 | { |
| 114 | int ret; |
| 115 | |
| 116 | ret = ds2780_store_eeprom(dev_info->w1_dev, reg); |
| 117 | if (ret < 0) |
| 118 | return ret; |
| 119 | |
| 120 | ret = ds2780_recall_eeprom(dev_info->w1_dev, reg); |
| 121 | if (ret < 0) |
| 122 | return ret; |
| 123 | |
| 124 | return 0; |
| 125 | } |
| 126 | |
| 127 | /* Set sense resistor value in mhos */ |
| 128 | static int ds2780_set_sense_register(struct ds2780_device_info *dev_info, |
| 129 | u8 conductance) |
| 130 | { |
| 131 | int ret; |
| 132 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 133 | ret = ds2780_write(dev_info, &conductance, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 134 | DS2780_RSNSP_REG, sizeof(u8)); |
| 135 | if (ret < 0) |
| 136 | return ret; |
| 137 | |
| 138 | return ds2780_save_eeprom(dev_info, DS2780_RSNSP_REG); |
| 139 | } |
| 140 | |
| 141 | /* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */ |
| 142 | static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info, |
| 143 | u16 *rsgain) |
| 144 | { |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 145 | return ds2780_read16(dev_info, rsgain, DS2780_RSGAIN_MSB_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 146 | } |
| 147 | |
| 148 | /* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */ |
| 149 | static int ds2780_set_rsgain_register(struct ds2780_device_info *dev_info, |
| 150 | u16 rsgain) |
| 151 | { |
| 152 | int ret; |
| 153 | u8 raw[] = {rsgain >> 8, rsgain & 0xFF}; |
| 154 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 155 | ret = ds2780_write(dev_info, raw, |
| 156 | DS2780_RSGAIN_MSB_REG, sizeof(raw)); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 157 | if (ret < 0) |
| 158 | return ret; |
| 159 | |
| 160 | return ds2780_save_eeprom(dev_info, DS2780_RSGAIN_MSB_REG); |
| 161 | } |
| 162 | |
| 163 | static int ds2780_get_voltage(struct ds2780_device_info *dev_info, |
| 164 | int *voltage_uV) |
| 165 | { |
| 166 | int ret; |
| 167 | s16 voltage_raw; |
| 168 | |
| 169 | /* |
| 170 | * The voltage value is located in 10 bits across the voltage MSB |
| 171 | * and LSB registers in two's compliment form |
| 172 | * Sign bit of the voltage value is in bit 7 of the voltage MSB register |
| 173 | * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the |
| 174 | * voltage MSB register |
| 175 | * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the |
| 176 | * voltage LSB register |
| 177 | */ |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 178 | ret = ds2780_read16(dev_info, &voltage_raw, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 179 | DS2780_VOLT_MSB_REG); |
| 180 | if (ret < 0) |
| 181 | return ret; |
| 182 | |
| 183 | /* |
| 184 | * DS2780 reports voltage in units of 4.88mV, but the battery class |
| 185 | * reports in units of uV, so convert by multiplying by 4880. |
| 186 | */ |
| 187 | *voltage_uV = (voltage_raw / 32) * 4880; |
| 188 | return 0; |
| 189 | } |
| 190 | |
| 191 | static int ds2780_get_temperature(struct ds2780_device_info *dev_info, |
| 192 | int *temperature) |
| 193 | { |
| 194 | int ret; |
| 195 | s16 temperature_raw; |
| 196 | |
| 197 | /* |
| 198 | * The temperature value is located in 10 bits across the temperature |
| 199 | * MSB and LSB registers in two's compliment form |
| 200 | * Sign bit of the temperature value is in bit 7 of the temperature |
| 201 | * MSB register |
| 202 | * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the |
| 203 | * temperature MSB register |
| 204 | * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the |
| 205 | * temperature LSB register |
| 206 | */ |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 207 | ret = ds2780_read16(dev_info, &temperature_raw, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 208 | DS2780_TEMP_MSB_REG); |
| 209 | if (ret < 0) |
| 210 | return ret; |
| 211 | |
| 212 | /* |
| 213 | * Temperature is measured in units of 0.125 degrees celcius, the |
| 214 | * power_supply class measures temperature in tenths of degrees |
| 215 | * celsius. The temperature value is stored as a 10 bit number, plus |
| 216 | * sign in the upper bits of a 16 bit register. |
| 217 | */ |
| 218 | *temperature = ((temperature_raw / 32) * 125) / 100; |
| 219 | return 0; |
| 220 | } |
| 221 | |
| 222 | static int ds2780_get_current(struct ds2780_device_info *dev_info, |
| 223 | enum current_types type, int *current_uA) |
| 224 | { |
| 225 | int ret, sense_res; |
| 226 | s16 current_raw; |
| 227 | u8 sense_res_raw, reg_msb; |
| 228 | |
| 229 | /* |
| 230 | * The units of measurement for current are dependent on the value of |
| 231 | * the sense resistor. |
| 232 | */ |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 233 | ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 234 | if (ret < 0) |
| 235 | return ret; |
| 236 | |
| 237 | if (sense_res_raw == 0) { |
| 238 | dev_err(dev_info->dev, "sense resistor value is 0\n"); |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 239 | return -EINVAL; |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 240 | } |
| 241 | sense_res = 1000 / sense_res_raw; |
| 242 | |
| 243 | if (type == CURRENT_NOW) |
| 244 | reg_msb = DS2780_CURRENT_MSB_REG; |
| 245 | else if (type == CURRENT_AVG) |
| 246 | reg_msb = DS2780_IAVG_MSB_REG; |
| 247 | else |
| 248 | return -EINVAL; |
| 249 | |
| 250 | /* |
| 251 | * The current value is located in 16 bits across the current MSB |
| 252 | * and LSB registers in two's compliment form |
| 253 | * Sign bit of the current value is in bit 7 of the current MSB register |
| 254 | * Bits 14 - 8 of the current value are in bits 6 - 0 of the current |
| 255 | * MSB register |
| 256 | * Bits 7 - 0 of the current value are in bits 7 - 0 of the current |
| 257 | * LSB register |
| 258 | */ |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 259 | ret = ds2780_read16(dev_info, ¤t_raw, reg_msb); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 260 | if (ret < 0) |
| 261 | return ret; |
| 262 | |
| 263 | *current_uA = current_raw * (DS2780_CURRENT_UNITS / sense_res); |
| 264 | return 0; |
| 265 | } |
| 266 | |
| 267 | static int ds2780_get_accumulated_current(struct ds2780_device_info *dev_info, |
| 268 | int *accumulated_current) |
| 269 | { |
| 270 | int ret, sense_res; |
| 271 | s16 current_raw; |
| 272 | u8 sense_res_raw; |
| 273 | |
| 274 | /* |
| 275 | * The units of measurement for accumulated current are dependent on |
| 276 | * the value of the sense resistor. |
| 277 | */ |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 278 | ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 279 | if (ret < 0) |
| 280 | return ret; |
| 281 | |
| 282 | if (sense_res_raw == 0) { |
| 283 | dev_err(dev_info->dev, "sense resistor value is 0\n"); |
| 284 | return -ENXIO; |
| 285 | } |
| 286 | sense_res = 1000 / sense_res_raw; |
| 287 | |
| 288 | /* |
| 289 | * The ACR value is located in 16 bits across the ACR MSB and |
| 290 | * LSB registers |
| 291 | * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR |
| 292 | * MSB register |
| 293 | * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR |
| 294 | * LSB register |
| 295 | */ |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 296 | ret = ds2780_read16(dev_info, ¤t_raw, DS2780_ACR_MSB_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 297 | if (ret < 0) |
| 298 | return ret; |
| 299 | |
| 300 | *accumulated_current = current_raw * (DS2780_CHARGE_UNITS / sense_res); |
| 301 | return 0; |
| 302 | } |
| 303 | |
| 304 | static int ds2780_get_capacity(struct ds2780_device_info *dev_info, |
| 305 | int *capacity) |
| 306 | { |
| 307 | int ret; |
| 308 | u8 raw; |
| 309 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 310 | ret = ds2780_read8(dev_info, &raw, DS2780_RARC_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 311 | if (ret < 0) |
| 312 | return ret; |
| 313 | |
| 314 | *capacity = raw; |
| 315 | return raw; |
| 316 | } |
| 317 | |
| 318 | static int ds2780_get_status(struct ds2780_device_info *dev_info, int *status) |
| 319 | { |
| 320 | int ret, current_uA, capacity; |
| 321 | |
| 322 | ret = ds2780_get_current(dev_info, CURRENT_NOW, ¤t_uA); |
| 323 | if (ret < 0) |
| 324 | return ret; |
| 325 | |
| 326 | ret = ds2780_get_capacity(dev_info, &capacity); |
| 327 | if (ret < 0) |
| 328 | return ret; |
| 329 | |
| 330 | if (capacity == 100) |
| 331 | *status = POWER_SUPPLY_STATUS_FULL; |
| 332 | else if (current_uA == 0) |
| 333 | *status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| 334 | else if (current_uA < 0) |
| 335 | *status = POWER_SUPPLY_STATUS_DISCHARGING; |
| 336 | else |
| 337 | *status = POWER_SUPPLY_STATUS_CHARGING; |
| 338 | |
| 339 | return 0; |
| 340 | } |
| 341 | |
| 342 | static int ds2780_get_charge_now(struct ds2780_device_info *dev_info, |
| 343 | int *charge_now) |
| 344 | { |
| 345 | int ret; |
| 346 | u16 charge_raw; |
| 347 | |
| 348 | /* |
| 349 | * The RAAC value is located in 16 bits across the RAAC MSB and |
| 350 | * LSB registers |
| 351 | * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC |
| 352 | * MSB register |
| 353 | * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC |
| 354 | * LSB register |
| 355 | */ |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 356 | ret = ds2780_read16(dev_info, &charge_raw, DS2780_RAAC_MSB_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 357 | if (ret < 0) |
| 358 | return ret; |
| 359 | |
| 360 | *charge_now = charge_raw * 1600; |
| 361 | return 0; |
| 362 | } |
| 363 | |
| 364 | static int ds2780_get_control_register(struct ds2780_device_info *dev_info, |
| 365 | u8 *control_reg) |
| 366 | { |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 367 | return ds2780_read8(dev_info, control_reg, DS2780_CONTROL_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 368 | } |
| 369 | |
| 370 | static int ds2780_set_control_register(struct ds2780_device_info *dev_info, |
| 371 | u8 control_reg) |
| 372 | { |
| 373 | int ret; |
| 374 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 375 | ret = ds2780_write(dev_info, &control_reg, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 376 | DS2780_CONTROL_REG, sizeof(u8)); |
| 377 | if (ret < 0) |
| 378 | return ret; |
| 379 | |
| 380 | return ds2780_save_eeprom(dev_info, DS2780_CONTROL_REG); |
| 381 | } |
| 382 | |
| 383 | static int ds2780_battery_get_property(struct power_supply *psy, |
| 384 | enum power_supply_property psp, |
| 385 | union power_supply_propval *val) |
| 386 | { |
| 387 | int ret = 0; |
| 388 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 389 | |
| 390 | switch (psp) { |
| 391 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| 392 | ret = ds2780_get_voltage(dev_info, &val->intval); |
| 393 | break; |
| 394 | |
| 395 | case POWER_SUPPLY_PROP_TEMP: |
| 396 | ret = ds2780_get_temperature(dev_info, &val->intval); |
| 397 | break; |
| 398 | |
| 399 | case POWER_SUPPLY_PROP_MODEL_NAME: |
| 400 | val->strval = model; |
| 401 | break; |
| 402 | |
| 403 | case POWER_SUPPLY_PROP_MANUFACTURER: |
| 404 | val->strval = manufacturer; |
| 405 | break; |
| 406 | |
| 407 | case POWER_SUPPLY_PROP_CURRENT_NOW: |
| 408 | ret = ds2780_get_current(dev_info, CURRENT_NOW, &val->intval); |
| 409 | break; |
| 410 | |
| 411 | case POWER_SUPPLY_PROP_CURRENT_AVG: |
| 412 | ret = ds2780_get_current(dev_info, CURRENT_AVG, &val->intval); |
| 413 | break; |
| 414 | |
| 415 | case POWER_SUPPLY_PROP_STATUS: |
| 416 | ret = ds2780_get_status(dev_info, &val->intval); |
| 417 | break; |
| 418 | |
| 419 | case POWER_SUPPLY_PROP_CAPACITY: |
| 420 | ret = ds2780_get_capacity(dev_info, &val->intval); |
| 421 | break; |
| 422 | |
| 423 | case POWER_SUPPLY_PROP_CHARGE_COUNTER: |
| 424 | ret = ds2780_get_accumulated_current(dev_info, &val->intval); |
| 425 | break; |
| 426 | |
| 427 | case POWER_SUPPLY_PROP_CHARGE_NOW: |
| 428 | ret = ds2780_get_charge_now(dev_info, &val->intval); |
| 429 | break; |
| 430 | |
| 431 | default: |
| 432 | ret = -EINVAL; |
| 433 | } |
| 434 | |
| 435 | return ret; |
| 436 | } |
| 437 | |
| 438 | static enum power_supply_property ds2780_battery_props[] = { |
| 439 | POWER_SUPPLY_PROP_STATUS, |
| 440 | POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| 441 | POWER_SUPPLY_PROP_TEMP, |
| 442 | POWER_SUPPLY_PROP_MODEL_NAME, |
| 443 | POWER_SUPPLY_PROP_MANUFACTURER, |
| 444 | POWER_SUPPLY_PROP_CURRENT_NOW, |
| 445 | POWER_SUPPLY_PROP_CURRENT_AVG, |
| 446 | POWER_SUPPLY_PROP_CAPACITY, |
| 447 | POWER_SUPPLY_PROP_CHARGE_COUNTER, |
| 448 | POWER_SUPPLY_PROP_CHARGE_NOW, |
| 449 | }; |
| 450 | |
| 451 | static ssize_t ds2780_get_pmod_enabled(struct device *dev, |
| 452 | struct device_attribute *attr, |
| 453 | char *buf) |
| 454 | { |
| 455 | int ret; |
| 456 | u8 control_reg; |
| 457 | struct power_supply *psy = to_power_supply(dev); |
| 458 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 459 | |
| 460 | /* Get power mode */ |
| 461 | ret = ds2780_get_control_register(dev_info, &control_reg); |
| 462 | if (ret < 0) |
| 463 | return ret; |
| 464 | |
| 465 | return sprintf(buf, "%d\n", |
| 466 | !!(control_reg & DS2780_CONTROL_REG_PMOD)); |
| 467 | } |
| 468 | |
| 469 | static ssize_t ds2780_set_pmod_enabled(struct device *dev, |
| 470 | struct device_attribute *attr, |
| 471 | const char *buf, |
| 472 | size_t count) |
| 473 | { |
| 474 | int ret; |
| 475 | u8 control_reg, new_setting; |
| 476 | struct power_supply *psy = to_power_supply(dev); |
| 477 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 478 | |
| 479 | /* Set power mode */ |
| 480 | ret = ds2780_get_control_register(dev_info, &control_reg); |
| 481 | if (ret < 0) |
| 482 | return ret; |
| 483 | |
| 484 | ret = kstrtou8(buf, 0, &new_setting); |
| 485 | if (ret < 0) |
| 486 | return ret; |
| 487 | |
| 488 | if ((new_setting != 0) && (new_setting != 1)) { |
| 489 | dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n"); |
| 490 | return -EINVAL; |
| 491 | } |
| 492 | |
| 493 | if (new_setting) |
| 494 | control_reg |= DS2780_CONTROL_REG_PMOD; |
| 495 | else |
| 496 | control_reg &= ~DS2780_CONTROL_REG_PMOD; |
| 497 | |
| 498 | ret = ds2780_set_control_register(dev_info, control_reg); |
| 499 | if (ret < 0) |
| 500 | return ret; |
| 501 | |
| 502 | return count; |
| 503 | } |
| 504 | |
| 505 | static ssize_t ds2780_get_sense_resistor_value(struct device *dev, |
| 506 | struct device_attribute *attr, |
| 507 | char *buf) |
| 508 | { |
| 509 | int ret; |
| 510 | u8 sense_resistor; |
| 511 | struct power_supply *psy = to_power_supply(dev); |
| 512 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 513 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 514 | ret = ds2780_read8(dev_info, &sense_resistor, DS2780_RSNSP_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 515 | if (ret < 0) |
| 516 | return ret; |
| 517 | |
| 518 | ret = sprintf(buf, "%d\n", sense_resistor); |
| 519 | return ret; |
| 520 | } |
| 521 | |
| 522 | static ssize_t ds2780_set_sense_resistor_value(struct device *dev, |
| 523 | struct device_attribute *attr, |
| 524 | const char *buf, |
| 525 | size_t count) |
| 526 | { |
| 527 | int ret; |
| 528 | u8 new_setting; |
| 529 | struct power_supply *psy = to_power_supply(dev); |
| 530 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 531 | |
| 532 | ret = kstrtou8(buf, 0, &new_setting); |
| 533 | if (ret < 0) |
| 534 | return ret; |
| 535 | |
| 536 | ret = ds2780_set_sense_register(dev_info, new_setting); |
| 537 | if (ret < 0) |
| 538 | return ret; |
| 539 | |
| 540 | return count; |
| 541 | } |
| 542 | |
| 543 | static ssize_t ds2780_get_rsgain_setting(struct device *dev, |
| 544 | struct device_attribute *attr, |
| 545 | char *buf) |
| 546 | { |
| 547 | int ret; |
| 548 | u16 rsgain; |
| 549 | struct power_supply *psy = to_power_supply(dev); |
| 550 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 551 | |
| 552 | ret = ds2780_get_rsgain_register(dev_info, &rsgain); |
| 553 | if (ret < 0) |
| 554 | return ret; |
| 555 | |
| 556 | return sprintf(buf, "%d\n", rsgain); |
| 557 | } |
| 558 | |
| 559 | static ssize_t ds2780_set_rsgain_setting(struct device *dev, |
| 560 | struct device_attribute *attr, |
| 561 | const char *buf, |
| 562 | size_t count) |
| 563 | { |
| 564 | int ret; |
| 565 | u16 new_setting; |
| 566 | struct power_supply *psy = to_power_supply(dev); |
| 567 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 568 | |
| 569 | ret = kstrtou16(buf, 0, &new_setting); |
| 570 | if (ret < 0) |
| 571 | return ret; |
| 572 | |
| 573 | /* Gain can only be from 0 to 1.999 in steps of .001 */ |
| 574 | if (new_setting > 1999) { |
| 575 | dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n"); |
| 576 | return -EINVAL; |
| 577 | } |
| 578 | |
| 579 | ret = ds2780_set_rsgain_register(dev_info, new_setting); |
| 580 | if (ret < 0) |
| 581 | return ret; |
| 582 | |
| 583 | return count; |
| 584 | } |
| 585 | |
| 586 | static ssize_t ds2780_get_pio_pin(struct device *dev, |
| 587 | struct device_attribute *attr, |
| 588 | char *buf) |
| 589 | { |
| 590 | int ret; |
| 591 | u8 sfr; |
| 592 | struct power_supply *psy = to_power_supply(dev); |
| 593 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 594 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 595 | ret = ds2780_read8(dev_info, &sfr, DS2780_SFR_REG); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 596 | if (ret < 0) |
| 597 | return ret; |
| 598 | |
| 599 | ret = sprintf(buf, "%d\n", sfr & DS2780_SFR_REG_PIOSC); |
| 600 | return ret; |
| 601 | } |
| 602 | |
| 603 | static ssize_t ds2780_set_pio_pin(struct device *dev, |
| 604 | struct device_attribute *attr, |
| 605 | const char *buf, |
| 606 | size_t count) |
| 607 | { |
| 608 | int ret; |
| 609 | u8 new_setting; |
| 610 | struct power_supply *psy = to_power_supply(dev); |
| 611 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 612 | |
| 613 | ret = kstrtou8(buf, 0, &new_setting); |
| 614 | if (ret < 0) |
| 615 | return ret; |
| 616 | |
| 617 | if ((new_setting != 0) && (new_setting != 1)) { |
| 618 | dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n"); |
| 619 | return -EINVAL; |
| 620 | } |
| 621 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 622 | ret = ds2780_write(dev_info, &new_setting, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 623 | DS2780_SFR_REG, sizeof(u8)); |
| 624 | if (ret < 0) |
| 625 | return ret; |
| 626 | |
| 627 | return count; |
| 628 | } |
| 629 | |
| 630 | static ssize_t ds2780_read_param_eeprom_bin(struct file *filp, |
| 631 | struct kobject *kobj, |
| 632 | struct bin_attribute *bin_attr, |
| 633 | char *buf, loff_t off, size_t count) |
| 634 | { |
| 635 | struct device *dev = container_of(kobj, struct device, kobj); |
| 636 | struct power_supply *psy = to_power_supply(dev); |
| 637 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 638 | |
| 639 | count = min_t(loff_t, count, |
| 640 | DS2780_EEPROM_BLOCK1_END - |
| 641 | DS2780_EEPROM_BLOCK1_START + 1 - off); |
| 642 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 643 | return ds2780_read_block(dev_info, buf, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 644 | DS2780_EEPROM_BLOCK1_START + off, count); |
| 645 | } |
| 646 | |
| 647 | static ssize_t ds2780_write_param_eeprom_bin(struct file *filp, |
| 648 | struct kobject *kobj, |
| 649 | struct bin_attribute *bin_attr, |
| 650 | char *buf, loff_t off, size_t count) |
| 651 | { |
| 652 | struct device *dev = container_of(kobj, struct device, kobj); |
| 653 | struct power_supply *psy = to_power_supply(dev); |
| 654 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 655 | int ret; |
| 656 | |
| 657 | count = min_t(loff_t, count, |
| 658 | DS2780_EEPROM_BLOCK1_END - |
| 659 | DS2780_EEPROM_BLOCK1_START + 1 - off); |
| 660 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 661 | ret = ds2780_write(dev_info, buf, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 662 | DS2780_EEPROM_BLOCK1_START + off, count); |
| 663 | if (ret < 0) |
| 664 | return ret; |
| 665 | |
| 666 | ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK1_START); |
| 667 | if (ret < 0) |
| 668 | return ret; |
| 669 | |
| 670 | return count; |
| 671 | } |
| 672 | |
| 673 | static struct bin_attribute ds2780_param_eeprom_bin_attr = { |
| 674 | .attr = { |
| 675 | .name = "param_eeprom", |
| 676 | .mode = S_IRUGO | S_IWUSR, |
| 677 | }, |
| 678 | .size = DS2780_EEPROM_BLOCK1_END - DS2780_EEPROM_BLOCK1_START + 1, |
| 679 | .read = ds2780_read_param_eeprom_bin, |
| 680 | .write = ds2780_write_param_eeprom_bin, |
| 681 | }; |
| 682 | |
| 683 | static ssize_t ds2780_read_user_eeprom_bin(struct file *filp, |
| 684 | struct kobject *kobj, |
| 685 | struct bin_attribute *bin_attr, |
| 686 | char *buf, loff_t off, size_t count) |
| 687 | { |
| 688 | struct device *dev = container_of(kobj, struct device, kobj); |
| 689 | struct power_supply *psy = to_power_supply(dev); |
| 690 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 691 | |
| 692 | count = min_t(loff_t, count, |
| 693 | DS2780_EEPROM_BLOCK0_END - |
| 694 | DS2780_EEPROM_BLOCK0_START + 1 - off); |
| 695 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 696 | return ds2780_read_block(dev_info, buf, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 697 | DS2780_EEPROM_BLOCK0_START + off, count); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 698 | } |
| 699 | |
| 700 | static ssize_t ds2780_write_user_eeprom_bin(struct file *filp, |
| 701 | struct kobject *kobj, |
| 702 | struct bin_attribute *bin_attr, |
| 703 | char *buf, loff_t off, size_t count) |
| 704 | { |
| 705 | struct device *dev = container_of(kobj, struct device, kobj); |
| 706 | struct power_supply *psy = to_power_supply(dev); |
| 707 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); |
| 708 | int ret; |
| 709 | |
| 710 | count = min_t(loff_t, count, |
| 711 | DS2780_EEPROM_BLOCK0_END - |
| 712 | DS2780_EEPROM_BLOCK0_START + 1 - off); |
| 713 | |
Clifton Barnes | 853eee7 | 2011-11-02 13:39:50 -0700 | [diff] [blame] | 714 | ret = ds2780_write(dev_info, buf, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 715 | DS2780_EEPROM_BLOCK0_START + off, count); |
| 716 | if (ret < 0) |
| 717 | return ret; |
| 718 | |
| 719 | ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK0_START); |
| 720 | if (ret < 0) |
| 721 | return ret; |
| 722 | |
| 723 | return count; |
| 724 | } |
| 725 | |
| 726 | static struct bin_attribute ds2780_user_eeprom_bin_attr = { |
| 727 | .attr = { |
| 728 | .name = "user_eeprom", |
| 729 | .mode = S_IRUGO | S_IWUSR, |
| 730 | }, |
| 731 | .size = DS2780_EEPROM_BLOCK0_END - DS2780_EEPROM_BLOCK0_START + 1, |
| 732 | .read = ds2780_read_user_eeprom_bin, |
| 733 | .write = ds2780_write_user_eeprom_bin, |
| 734 | }; |
| 735 | |
| 736 | static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2780_get_pmod_enabled, |
| 737 | ds2780_set_pmod_enabled); |
| 738 | static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR, |
| 739 | ds2780_get_sense_resistor_value, ds2780_set_sense_resistor_value); |
| 740 | static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2780_get_rsgain_setting, |
| 741 | ds2780_set_rsgain_setting); |
| 742 | static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2780_get_pio_pin, |
| 743 | ds2780_set_pio_pin); |
| 744 | |
| 745 | |
| 746 | static struct attribute *ds2780_attributes[] = { |
| 747 | &dev_attr_pmod_enabled.attr, |
| 748 | &dev_attr_sense_resistor_value.attr, |
| 749 | &dev_attr_rsgain_setting.attr, |
| 750 | &dev_attr_pio_pin.attr, |
| 751 | NULL |
| 752 | }; |
| 753 | |
| 754 | static const struct attribute_group ds2780_attr_group = { |
| 755 | .attrs = ds2780_attributes, |
| 756 | }; |
| 757 | |
Bill Pemberton | c8afa64 | 2012-11-19 13:22:23 -0500 | [diff] [blame] | 758 | static int ds2780_battery_probe(struct platform_device *pdev) |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 759 | { |
| 760 | int ret = 0; |
| 761 | struct ds2780_device_info *dev_info; |
| 762 | |
Jingoo Han | 2cb1212 | 2013-03-11 15:33:05 +0900 | [diff] [blame] | 763 | dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 764 | if (!dev_info) { |
| 765 | ret = -ENOMEM; |
| 766 | goto fail; |
| 767 | } |
| 768 | |
| 769 | platform_set_drvdata(pdev, dev_info); |
| 770 | |
| 771 | dev_info->dev = &pdev->dev; |
| 772 | dev_info->w1_dev = pdev->dev.parent; |
| 773 | dev_info->bat.name = dev_name(&pdev->dev); |
| 774 | dev_info->bat.type = POWER_SUPPLY_TYPE_BATTERY; |
| 775 | dev_info->bat.properties = ds2780_battery_props; |
| 776 | dev_info->bat.num_properties = ARRAY_SIZE(ds2780_battery_props); |
| 777 | dev_info->bat.get_property = ds2780_battery_get_property; |
| 778 | |
Krzysztof Kozlowski | 2dc9215 | 2015-03-12 08:44:02 +0100 | [diff] [blame] | 779 | ret = power_supply_register(&pdev->dev, &dev_info->bat, NULL); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 780 | if (ret) { |
| 781 | dev_err(dev_info->dev, "failed to register battery\n"); |
Jingoo Han | 2cb1212 | 2013-03-11 15:33:05 +0900 | [diff] [blame] | 782 | goto fail; |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 783 | } |
| 784 | |
| 785 | ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); |
| 786 | if (ret) { |
| 787 | dev_err(dev_info->dev, "failed to create sysfs group\n"); |
| 788 | goto fail_unregister; |
| 789 | } |
| 790 | |
| 791 | ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj, |
| 792 | &ds2780_param_eeprom_bin_attr); |
| 793 | if (ret) { |
| 794 | dev_err(dev_info->dev, |
| 795 | "failed to create param eeprom bin file"); |
| 796 | goto fail_remove_group; |
| 797 | } |
| 798 | |
| 799 | ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj, |
| 800 | &ds2780_user_eeprom_bin_attr); |
| 801 | if (ret) { |
| 802 | dev_err(dev_info->dev, |
| 803 | "failed to create user eeprom bin file"); |
| 804 | goto fail_remove_bin_file; |
| 805 | } |
| 806 | |
| 807 | return 0; |
| 808 | |
| 809 | fail_remove_bin_file: |
| 810 | sysfs_remove_bin_file(&dev_info->bat.dev->kobj, |
| 811 | &ds2780_param_eeprom_bin_attr); |
| 812 | fail_remove_group: |
| 813 | sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); |
| 814 | fail_unregister: |
| 815 | power_supply_unregister(&dev_info->bat); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 816 | fail: |
| 817 | return ret; |
| 818 | } |
| 819 | |
Bill Pemberton | 415ec69 | 2012-11-19 13:26:07 -0500 | [diff] [blame] | 820 | static int ds2780_battery_remove(struct platform_device *pdev) |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 821 | { |
| 822 | struct ds2780_device_info *dev_info = platform_get_drvdata(pdev); |
| 823 | |
| 824 | /* remove attributes */ |
| 825 | sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); |
| 826 | |
| 827 | power_supply_unregister(&dev_info->bat); |
| 828 | |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 829 | return 0; |
| 830 | } |
| 831 | |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 832 | static struct platform_driver ds2780_battery_driver = { |
| 833 | .driver = { |
| 834 | .name = "ds2780-battery", |
| 835 | }, |
| 836 | .probe = ds2780_battery_probe, |
Bill Pemberton | 28ea73f | 2012-11-19 13:20:40 -0500 | [diff] [blame] | 837 | .remove = ds2780_battery_remove, |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 838 | }; |
| 839 | |
Axel Lin | 300bac7 | 2011-11-26 12:01:10 +0800 | [diff] [blame] | 840 | module_platform_driver(ds2780_battery_driver); |
Clifton Barnes | 275ac74 | 2011-05-26 16:26:04 -0700 | [diff] [blame] | 841 | |
| 842 | MODULE_LICENSE("GPL"); |
| 843 | MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>"); |
| 844 | MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver"); |
Axel Lin | 300bac7 | 2011-11-26 12:01:10 +0800 | [diff] [blame] | 845 | MODULE_ALIAS("platform:ds2780-battery"); |