blob: d29baa2e063ac04ca7422f132207cf329b7e47c8 [file] [log] [blame]
Steven Rostedt8da38212008-08-14 15:45:07 -04001#!/usr/bin/perl -w
2# (c) 2008, Steven Rostedt <srostedt@redhat.com>
3# Licensed under the terms of the GNU GPL License version 2
4#
5# recordmcount.pl - makes a section called __mcount_loc that holds
6# all the offsets to the calls to mcount.
7#
8#
9# What we want to end up with is a section in vmlinux called
10# __mcount_loc that contains a list of pointers to all the
11# call sites in the kernel that call mcount. Later on boot up, the kernel
12# will read this list, save the locations and turn them into nops.
13# When tracing or profiling is later enabled, these locations will then
14# be converted back to pointers to some function.
15#
16# This is no easy feat. This script is called just after the original
17# object is compiled and before it is linked.
18#
19# The references to the call sites are offsets from the section of text
20# that the call site is in. Hence, all functions in a section that
21# has a call site to mcount, will have the offset from the beginning of
22# the section and not the beginning of the function.
23#
24# The trick is to find a way to record the beginning of the section.
25# The way we do this is to look at the first function in the section
26# which will also be the location of that section after final link.
27# e.g.
28#
Tim Abbott31b6e762009-04-30 20:06:11 -040029# .section ".sched.text", "ax"
Steven Rostedt8da38212008-08-14 15:45:07 -040030# .globl my_func
31# my_func:
32# [...]
33# call mcount (offset: 0x5)
34# [...]
35# ret
36# other_func:
37# [...]
38# call mcount (offset: 0x1b)
39# [...]
40#
41# Both relocation offsets for the mcounts in the above example will be
Tim Abbott31b6e762009-04-30 20:06:11 -040042# offset from .sched.text. If we make another file called tmp.s with:
Steven Rostedt8da38212008-08-14 15:45:07 -040043#
44# .section __mcount_loc
45# .quad my_func + 0x5
46# .quad my_func + 0x1b
47#
48# We can then compile this tmp.s into tmp.o, and link it to the original
49# object.
50#
51# But this gets hard if my_func is not globl (a static function).
52# In such a case we have:
53#
Tim Abbott31b6e762009-04-30 20:06:11 -040054# .section ".sched.text", "ax"
Steven Rostedt8da38212008-08-14 15:45:07 -040055# my_func:
56# [...]
57# call mcount (offset: 0x5)
58# [...]
59# ret
60# .globl my_func
61# other_func:
62# [...]
63# call mcount (offset: 0x1b)
64# [...]
65#
66# If we make the tmp.s the same as above, when we link together with
67# the original object, we will end up with two symbols for my_func:
68# one local, one global. After final compile, we will end up with
69# an undefined reference to my_func.
70#
71# Since local objects can reference local variables, we need to find
72# a way to make tmp.o reference the local objects of the original object
73# file after it is linked together. To do this, we convert the my_func
74# into a global symbol before linking tmp.o. Then after we link tmp.o
75# we will only have a single symbol for my_func that is global.
76# We can convert my_func back into a local symbol and we are done.
77#
78# Here are the steps we take:
79#
80# 1) Record all the local symbols by using 'nm'
81# 2) Use objdump to find all the call site offsets and sections for
82# mcount.
83# 3) Compile the list into its own object.
84# 4) Do we have to deal with local functions? If not, go to step 8.
85# 5) Make an object that converts these local functions to global symbols
86# with objcopy.
87# 6) Link together this new object with the list object.
88# 7) Convert the local functions back to local symbols and rename
89# the result as the original object.
90# End.
91# 8) Link the object with the list object.
92# 9) Move the result back to the original object.
93# End.
94#
95
96use strict;
97
98my $P = $0;
99$P =~ s@.*/@@g;
100
101my $V = '0.1';
102
Shaohua Li18c167f2009-01-12 10:00:51 +0800103if ($#ARGV < 7) {
Steven Rostedtb43f7092009-01-16 23:18:31 -0500104 print "usage: $P arch bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
Steven Rostedt8da38212008-08-14 15:45:07 -0400105 print "version: $V\n";
106 exit(1);
107}
108
Steven Rostedtdce9d182008-10-23 09:32:57 -0400109my ($arch, $bits, $objdump, $objcopy, $cc,
Shaohua Li18c167f2009-01-12 10:00:51 +0800110 $ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV;
Steven Rostedt8da38212008-08-14 15:45:07 -0400111
Shaohua Li25aac9d2009-01-09 11:29:40 +0800112# This file refers to mcount and shouldn't be ftraced, so lets' ignore it
113if ($inputfile eq "kernel/trace/ftrace.o") {
114 exit(0);
115}
116
Steven Rostedt34698bc2008-10-23 09:32:58 -0400117# Acceptable sections to record.
118my %text_sections = (
119 ".text" => 1,
Liming Wangd144d5e2008-11-26 10:29:26 +0800120 ".sched.text" => 1,
121 ".spinlock.text" => 1,
Frederic Weisbeckera0343e82008-12-09 23:53:16 +0100122 ".irqentry.text" => 1,
Steven Rostedt34698bc2008-10-23 09:32:58 -0400123);
124
Steven Rostedt8da38212008-08-14 15:45:07 -0400125$objdump = "objdump" if ((length $objdump) == 0);
126$objcopy = "objcopy" if ((length $objcopy) == 0);
127$cc = "gcc" if ((length $cc) == 0);
128$ld = "ld" if ((length $ld) == 0);
129$nm = "nm" if ((length $nm) == 0);
130$rm = "rm" if ((length $rm) == 0);
131$mv = "mv" if ((length $mv) == 0);
132
133#print STDERR "running: $P '$arch' '$objdump' '$objcopy' '$cc' '$ld' " .
134# "'$nm' '$rm' '$mv' '$inputfile'\n";
135
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400136my %locals; # List of local (static) functions
137my %weak; # List of weak functions
138my %convert; # List of local functions used that needs conversion
Steven Rostedt8da38212008-08-14 15:45:07 -0400139
140my $type;
Steven Rostedt42e007d2008-11-20 07:16:16 -0800141my $nm_regex; # Find the local functions (return function)
Steven Rostedt8da38212008-08-14 15:45:07 -0400142my $section_regex; # Find the start of a section
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400143my $function_regex; # Find the name of a function
144 # (return offset and func name)
Steven Rostedt8da38212008-08-14 15:45:07 -0400145my $mcount_regex; # Find the call site to mcount (return offset)
Matt Fleming3a3d04a2008-11-20 21:49:52 +0000146my $alignment; # The .align value to use for $mcount_section
Jim Radforde58918a2008-11-20 19:48:39 -0800147my $section_type; # Section header plus possible alignment command
Steven Rostedt8da38212008-08-14 15:45:07 -0400148
Steven Rostedtdce9d182008-10-23 09:32:57 -0400149if ($arch eq "x86") {
150 if ($bits == 64) {
151 $arch = "x86_64";
152 } else {
153 $arch = "i386";
154 }
155}
156
Steven Rostedtc204f722008-11-20 15:07:34 -0500157#
158# We base the defaults off of i386, the other archs may
159# feel free to change them in the below if statements.
160#
161$nm_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
162$section_regex = "Disassembly of section\\s+(\\S+):";
163$function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
164$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount\$";
Jim Radforde58918a2008-11-20 19:48:39 -0800165$section_type = '@progbits';
Steven Rostedtc204f722008-11-20 15:07:34 -0500166$type = ".long";
167
Steven Rostedt8da38212008-08-14 15:45:07 -0400168if ($arch eq "x86_64") {
Steven Rostedt8da38212008-08-14 15:45:07 -0400169 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount([+-]0x[0-9a-zA-Z]+)?\$";
170 $type = ".quad";
Matt Fleming7d5222a2008-11-07 13:26:25 +0000171 $alignment = 8;
Steven Rostedtd74fcd12008-08-15 11:40:24 -0400172
173 # force flags for this arch
174 $ld .= " -m elf_x86_64";
175 $objdump .= " -M x86-64";
176 $objcopy .= " -O elf64-x86-64";
177 $cc .= " -m64";
178
Steven Rostedt8da38212008-08-14 15:45:07 -0400179} elsif ($arch eq "i386") {
Matt Fleming7d5222a2008-11-07 13:26:25 +0000180 $alignment = 4;
Steven Rostedtd74fcd12008-08-15 11:40:24 -0400181
182 # force flags for this arch
183 $ld .= " -m elf_i386";
184 $objdump .= " -M i386";
185 $objcopy .= " -O elf32-i386";
186 $cc .= " -m32";
187
Heiko Carstensdfd9f7a2009-06-12 10:26:44 +0200188} elsif ($arch eq "s390" && $bits == 32) {
189 $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_32\\s+_mcount\$";
190 $alignment = 4;
191 $ld .= " -m elf_s390";
192 $cc .= " -m31";
193
194} elsif ($arch eq "s390" && $bits == 64) {
195 $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";
196 $alignment = 8;
197 $type = ".quad";
198 $ld .= " -m elf64_s390";
199 $cc .= " -m64";
200
Matt Fleming0da85c02008-11-12 20:11:47 +0900201} elsif ($arch eq "sh") {
Matt Fleming3a3d04a2008-11-20 21:49:52 +0000202 $alignment = 2;
Matt Fleming0da85c02008-11-12 20:11:47 +0900203
204 # force flags for this arch
205 $ld .= " -m shlelf_linux";
206 $objcopy .= " -O elf32-sh-linux";
207 $cc .= " -m32";
208
Steven Rostedt42e007d2008-11-20 07:16:16 -0800209} elsif ($arch eq "powerpc") {
210 $nm_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
Steven Rostedt42e007d2008-11-20 07:16:16 -0800211 $function_regex = "^([0-9a-fA-F]+)\\s+<(\\.?.*?)>:";
212 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s\\.?_mcount\$";
Steven Rostedtc204f722008-11-20 15:07:34 -0500213
Steven Rostedt42e007d2008-11-20 07:16:16 -0800214 if ($bits == 64) {
215 $type = ".quad";
Steven Rostedt42e007d2008-11-20 07:16:16 -0800216 }
217
Jim Radforde58918a2008-11-20 19:48:39 -0800218} elsif ($arch eq "arm") {
219 $alignment = 2;
220 $section_type = '%progbits';
221
Shaohua Li418071e2009-01-09 11:29:44 +0800222} elsif ($arch eq "ia64") {
223 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
224 $type = "data8";
225
226 if ($is_module eq "0") {
227 $cc .= " -mconstant-gp";
228 }
David S. Miller9be12f92009-06-13 01:03:24 -0700229} elsif ($arch eq "sparc64") {
230 # In the objdump output there are giblets like:
231 # 0000000000000000 <igmp_net_exit-0x18>:
232 # As there's some data blobs that get emitted into the
233 # text section before the first instructions and the first
234 # real symbols. We don't want to match that, so to combat
235 # this we use '\w' so we'll match just plain symbol names,
236 # and not those that also include hex offsets inside of the
237 # '<>' brackets. Actually the generic function_regex setting
238 # could safely use this too.
239 $function_regex = "^([0-9a-fA-F]+)\\s+<(\\w*?)>:";
240
241 # Sparc64 calls '_mcount' instead of plain 'mcount'.
242 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
243
244 $alignment = 8;
245 $type = ".xword";
246 $ld .= " -m elf64_sparc";
247 $cc .= " -m64";
248 $objcopy .= " -O elf64-sparc";
Steven Rostedt8da38212008-08-14 15:45:07 -0400249} else {
250 die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
251}
252
253my $text_found = 0;
254my $read_function = 0;
255my $opened = 0;
Steven Rostedt8da38212008-08-14 15:45:07 -0400256my $mcount_section = "__mcount_loc";
257
258my $dirname;
259my $filename;
260my $prefix;
261my $ext;
262
263if ($inputfile =~ m,^(.*)/([^/]*)$,) {
264 $dirname = $1;
265 $filename = $2;
266} else {
267 $dirname = ".";
268 $filename = $inputfile;
269}
270
271if ($filename =~ m,^(.*)(\.\S),) {
272 $prefix = $1;
273 $ext = $2;
274} else {
275 $prefix = $filename;
276 $ext = "";
277}
278
279my $mcount_s = $dirname . "/.tmp_mc_" . $prefix . ".s";
280my $mcount_o = $dirname . "/.tmp_mc_" . $prefix . ".o";
281
282#
Steven Rostedtf2f84582008-08-25 14:52:11 -0400283# --globalize-symbols came out in 2.17, we must test the version
284# of objcopy, and if it is less than 2.17, then we can not
285# record local functions.
286my $use_locals = 01;
287my $local_warn_once = 0;
288my $found_version = 0;
289
290open (IN, "$objcopy --version |") || die "error running $objcopy";
291while (<IN>) {
292 if (/objcopy.*\s(\d+)\.(\d+)/) {
293 my $major = $1;
294 my $minor = $2;
295
296 $found_version = 1;
297 if ($major < 2 ||
298 ($major == 2 && $minor < 17)) {
299 $use_locals = 0;
300 }
301 last;
302 }
303}
304close (IN);
305
306if (!$found_version) {
307 print STDERR "WARNING: could not find objcopy version.\n" .
308 "\tDisabling local function references.\n";
309}
310
Steven Rostedtf2f84582008-08-25 14:52:11 -0400311#
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400312# Step 1: find all the local (static functions) and weak symbols.
313# 't' is local, 'w/W' is weak (we never use a weak function)
Steven Rostedt8da38212008-08-14 15:45:07 -0400314#
315open (IN, "$nm $inputfile|") || die "error running $nm";
316while (<IN>) {
Steven Rostedt42e007d2008-11-20 07:16:16 -0800317 if (/$nm_regex/) {
Steven Rostedt8da38212008-08-14 15:45:07 -0400318 $locals{$1} = 1;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400319 } elsif (/^[0-9a-fA-F]+\s+([wW])\s+(\S+)/) {
320 $weak{$2} = $1;
Steven Rostedt8da38212008-08-14 15:45:07 -0400321 }
322}
323close(IN);
324
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400325my @offsets; # Array of offsets of mcount callers
326my $ref_func; # reference function to use for offsets
327my $offset = 0; # offset of ref_func to section beginning
328
329##
330# update_funcs - print out the current mcount callers
331#
332# Go through the list of offsets to callers and write them to
333# the output file in a format that can be read by an assembler.
334#
335sub update_funcs
336{
337 return if ($#offsets < 0);
338
339 defined($ref_func) || die "No function to reference";
340
341 # A section only had a weak function, to represent it.
342 # Unfortunately, a weak function may be overwritten by another
343 # function of the same name, making all these offsets incorrect.
344 # To be safe, we simply print a warning and bail.
345 if (defined $weak{$ref_func}) {
346 print STDERR
347 "$inputfile: WARNING: referencing weak function" .
348 " $ref_func for mcount\n";
349 return;
350 }
351
352 # is this function static? If so, note this fact.
353 if (defined $locals{$ref_func}) {
Steven Rostedtf2f84582008-08-25 14:52:11 -0400354
355 # only use locals if objcopy supports globalize-symbols
356 if (!$use_locals) {
Steven Rostedtf2f84582008-08-25 14:52:11 -0400357 return;
358 }
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400359 $convert{$ref_func} = 1;
360 }
361
362 # Loop through all the mcount caller offsets and print a reference
363 # to the caller based from the ref_func.
364 for (my $i=0; $i <= $#offsets; $i++) {
365 if (!$opened) {
366 open(FILE, ">$mcount_s") || die "can't create $mcount_s\n";
367 $opened = 1;
Jim Radforde58918a2008-11-20 19:48:39 -0800368 print FILE "\t.section $mcount_section,\"a\",$section_type\n";
Steven Rostedt42e007d2008-11-20 07:16:16 -0800369 print FILE "\t.align $alignment\n" if (defined($alignment));
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400370 }
371 printf FILE "\t%s %s + %d\n", $type, $ref_func, $offsets[$i] - $offset;
372 }
373}
374
Steven Rostedt8da38212008-08-14 15:45:07 -0400375#
376# Step 2: find the sections and mcount call sites
377#
Steven Rostedtb43f7092009-01-16 23:18:31 -0500378open(IN, "$objdump -hdr $inputfile|") || die "error running $objdump";
Steven Rostedt8da38212008-08-14 15:45:07 -0400379
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400380my $text;
381
Steven Rostedtb43f7092009-01-16 23:18:31 -0500382my $read_headers = 1;
383
Steven Rostedt8da38212008-08-14 15:45:07 -0400384while (<IN>) {
385 # is it a section?
386 if (/$section_regex/) {
Steven Rostedtb43f7092009-01-16 23:18:31 -0500387 $read_headers = 0;
Steven Rostedt34698bc2008-10-23 09:32:58 -0400388
389 # Only record text sections that we know are safe
390 if (defined($text_sections{$1})) {
391 $read_function = 1;
392 } else {
393 $read_function = 0;
394 }
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400395 # print out any recorded offsets
396 update_funcs() if ($text_found);
397
398 # reset all markers and arrays
Steven Rostedt8da38212008-08-14 15:45:07 -0400399 $text_found = 0;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400400 undef($ref_func);
401 undef(@offsets);
402
Steven Rostedt8da38212008-08-14 15:45:07 -0400403 # section found, now is this a start of a function?
404 } elsif ($read_function && /$function_regex/) {
Steven Rostedt8da38212008-08-14 15:45:07 -0400405 $text_found = 1;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400406 $text = $2;
407
408 # if this is either a local function or a weak function
409 # keep looking for functions that are global that
410 # we can use safely.
411 if (!defined($locals{$text}) && !defined($weak{$text})) {
412 $ref_func = $text;
413 $read_function = 0;
Matt Flemingbd171d52009-07-23 17:16:15 +0100414 $offset = hex $1;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400415 } else {
416 # if we already have a function, and this is weak, skip it
Matt Flemingfc4c7352009-07-23 17:16:14 +0100417 if (!defined($ref_func) && !defined($weak{$text})) {
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400418 $ref_func = $text;
Matt Flemingbd171d52009-07-23 17:16:15 +0100419 $offset = hex $1;
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400420 }
Steven Rostedt8da38212008-08-14 15:45:07 -0400421 }
Steven Rostedtb43f7092009-01-16 23:18:31 -0500422 } elsif ($read_headers && /$mcount_section/) {
423 #
424 # Somehow the make process can execute this script on an
425 # object twice. If it does, we would duplicate the mcount
426 # section and it will cause the function tracer self test
427 # to fail. Check if the mcount section exists, and if it does,
428 # warn and exit.
429 #
430 print STDERR "ERROR: $mcount_section already in $inputfile\n" .
431 "\tThis may be an indication that your build is corrupted.\n" .
432 "\tDelete $inputfile and try again. If the same object file\n" .
433 "\tstill causes an issue, then disable CONFIG_DYNAMIC_FTRACE.\n";
434 exit(-1);
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400435 }
436
437 # is this a call site to mcount? If so, record it to print later
438 if ($text_found && /$mcount_regex/) {
439 $offsets[$#offsets + 1] = hex $1;
Steven Rostedt8da38212008-08-14 15:45:07 -0400440 }
441}
442
Steven Rostedt8feff1c2008-08-20 10:07:35 -0400443# dump out anymore offsets that may have been found
444update_funcs() if ($text_found);
445
Steven Rostedt8da38212008-08-14 15:45:07 -0400446# If we did not find any mcount callers, we are done (do nothing).
447if (!$opened) {
448 exit(0);
449}
450
451close(FILE);
452
453#
454# Step 3: Compile the file that holds the list of call sites to mcount.
455#
456`$cc -o $mcount_o -c $mcount_s`;
457
458my @converts = keys %convert;
459
460#
461# Step 4: Do we have sections that started with local functions?
462#
463if ($#converts >= 0) {
464 my $globallist = "";
465 my $locallist = "";
466
467 foreach my $con (@converts) {
468 $globallist .= " --globalize-symbol $con";
469 $locallist .= " --localize-symbol $con";
470 }
471
472 my $globalobj = $dirname . "/.tmp_gl_" . $filename;
473 my $globalmix = $dirname . "/.tmp_mx_" . $filename;
474
475 #
476 # Step 5: set up each local function as a global
477 #
478 `$objcopy $globallist $inputfile $globalobj`;
479
480 #
481 # Step 6: Link the global version to our list.
482 #
483 `$ld -r $globalobj $mcount_o -o $globalmix`;
484
485 #
486 # Step 7: Convert the local functions back into local symbols
487 #
488 `$objcopy $locallist $globalmix $inputfile`;
489
490 # Remove the temp files
491 `$rm $globalobj $globalmix`;
492
493} else {
494
495 my $mix = $dirname . "/.tmp_mx_" . $filename;
496
497 #
498 # Step 8: Link the object with our list of call sites object.
499 #
500 `$ld -r $inputfile $mcount_o -o $mix`;
501
502 #
503 # Step 9: Move the result back to the original object.
504 #
505 `$mv $mix $inputfile`;
506}
507
508# Clean up the temp files
509`$rm $mcount_o $mcount_s`;
510
511exit(0);